rt-thread/bsp/frdm-k64f/device/MK64F12/fsl_vref.h

257 lines
8.8 KiB
C

/*
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_VREF_H_
#define _FSL_VREF_H_
#include "fsl_common.h"
/*!
* @addtogroup vref
* @{
*/
/******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
#define FSL_VREF_DRIVER_VERSION (MAKE_VERSION(2, 1, 0)) /*!< Version 2.1.0. */
/*@}*/
/* Those macros below defined to support SoC family which have VREFL (0.4V) reference */
#if defined(FSL_FEATURE_VREF_HAS_LOW_REFERENCE) && FSL_FEATURE_VREF_HAS_LOW_REFERENCE
#define VREF_SC_MODE_LV VREF_VREFH_SC_MODE_LV
#define VREF_SC_REGEN VREF_VREFH_SC_REGEN
#define VREF_SC_VREFEN VREF_VREFH_SC_VREFEN
#define VREF_SC_ICOMPEN VREF_VREFH_SC_ICOMPEN
#define VREF_SC_REGEN_MASK VREF_VREFH_SC_REGEN_MASK
#define VREF_SC_VREFST_MASK VREF_VREFH_SC_VREFST_MASK
#define VREF_SC_VREFEN_MASK VREF_VREFH_SC_VREFEN_MASK
#define VREF_SC_MODE_LV_MASK VREF_VREFH_SC_MODE_LV_MASK
#define VREF_SC_ICOMPEN_MASK VREF_VREFH_SC_ICOMPEN_MASK
#define TRM VREFH_TRM
#define VREF_TRM_TRIM VREF_VREFH_TRM_TRIM
#define VREF_TRM_CHOPEN_MASK VREF_VREFH_TRM_CHOPEN_MASK
#define VREF_TRM_TRIM_MASK VREF_VREFH_TRM_TRIM_MASK
#define VREF_TRM_CHOPEN_SHIFT VREF_VREFH_TRM_CHOPEN_SHIFT
#define VREF_TRM_TRIM_SHIFT VREF_VREFH_TRM_TRIM_SHIFT
#define VREF_SC_MODE_LV_SHIFT VREF_VREFH_SC_MODE_LV_SHIFT
#define VREF_SC_REGEN_SHIFT VREF_VREFH_SC_REGEN_SHIFT
#define VREF_SC_VREFST_SHIFT VREF_VREFH_SC_VREFST_SHIFT
#define VREF_SC_ICOMPEN_SHIFT VREF_VREFH_SC_ICOMPEN_SHIFT
#endif /* FSL_FEATURE_VREF_HAS_LOW_REFERENCE */
/*!
* @brief VREF modes.
*/
typedef enum _vref_buffer_mode
{
kVREF_ModeBandgapOnly = 0U, /*!< Bandgap on only, for stabilization and startup */
#if defined(FSL_FEATURE_VREF_MODE_LV_TYPE) && FSL_FEATURE_VREF_MODE_LV_TYPE
kVREF_ModeHighPowerBuffer = 1U, /*!< High-power buffer mode enabled */
kVREF_ModeLowPowerBuffer = 2U /*!< Low-power buffer mode enabled */
#else
kVREF_ModeTightRegulationBuffer = 2U /*!< Tight regulation buffer enabled */
#endif /* FSL_FEATURE_VREF_MODE_LV_TYPE */
} vref_buffer_mode_t;
/*!
* @brief The description structure for the VREF module.
*/
typedef struct _vref_config
{
vref_buffer_mode_t bufferMode; /*!< Buffer mode selection */
#if defined(FSL_FEATURE_VREF_HAS_LOW_REFERENCE) && FSL_FEATURE_VREF_HAS_LOW_REFERENCE
bool enableLowRef; /*!< Set VREFL (0.4 V) reference buffer enable or disable */
bool enableExternalVoltRef; /*!< Select external voltage reference or not (internal) */
#endif /* FSL_FEATURE_VREF_HAS_LOW_REFERENCE */
#if defined(FSL_FEATURE_VREF_HAS_TRM4) && FSL_FEATURE_VREF_HAS_TRM4
bool enable2V1VoltRef; /*!< Enable Internal Voltage Reference (2.1V) */
#endif /* FSL_FEATURE_VREF_HAS_TRM4 */
} vref_config_t;
/******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
/*!
* @name VREF functional operation
* @{
*/
/*!
* @brief Enables the clock gate and configures the VREF module according to the configuration structure.
*
* This function must be called before calling all other VREF driver functions,
* read/write registers, and configurations with user-defined settings.
* The example below shows how to set up vref_config_t parameters and
* how to call the VREF_Init function by passing in these parameters.
* This is an example.
* @code
* vref_config_t vrefConfig;
* vrefConfig.bufferMode = kVREF_ModeHighPowerBuffer;
* vrefConfig.enableExternalVoltRef = false;
* vrefConfig.enableLowRef = false;
* VREF_Init(VREF, &vrefConfig);
* @endcode
*
* @param base VREF peripheral address.
* @param config Pointer to the configuration structure.
*/
void VREF_Init(VREF_Type *base, const vref_config_t *config);
/*!
* @brief Stops and disables the clock for the VREF module.
*
* This function should be called to shut down the module.
* This is an example.
* @code
* vref_config_t vrefUserConfig;
* VREF_Init(VREF);
* VREF_GetDefaultConfig(&vrefUserConfig);
* ...
* VREF_Deinit(VREF);
* @endcode
*
* @param base VREF peripheral address.
*/
void VREF_Deinit(VREF_Type *base);
/*!
* @brief Initializes the VREF configuration structure.
*
* This function initializes the VREF configuration structure to default values.
* This is an example.
* @code
* vrefConfig->bufferMode = kVREF_ModeHighPowerBuffer;
* vrefConfig->enableExternalVoltRef = false;
* vrefConfig->enableLowRef = false;
* @endcode
*
* @param config Pointer to the initialization structure.
*/
void VREF_GetDefaultConfig(vref_config_t *config);
/*!
* @brief Sets a TRIM value for the reference voltage.
*
* This function sets a TRIM value for the reference voltage.
* Note that the TRIM value maximum is 0x3F.
*
* @param base VREF peripheral address.
* @param trimValue Value of the trim register to set the output reference voltage (maximum 0x3F (6-bit)).
*/
void VREF_SetTrimVal(VREF_Type *base, uint8_t trimValue);
/*!
* @brief Reads the value of the TRIM meaning output voltage.
*
* This function gets the TRIM value from the TRM register.
*
* @param base VREF peripheral address.
* @return Six-bit value of trim setting.
*/
static inline uint8_t VREF_GetTrimVal(VREF_Type *base)
{
return (base->TRM & VREF_TRM_TRIM_MASK);
}
#if defined(FSL_FEATURE_VREF_HAS_TRM4) && FSL_FEATURE_VREF_HAS_TRM4
/*!
* @brief Sets a TRIM value for the reference voltage (2V1).
*
* This function sets a TRIM value for the reference voltage (2V1).
* Note that the TRIM value maximum is 0x3F.
*
* @param base VREF peripheral address.
* @param trimValue Value of the trim register to set the output reference voltage (maximum 0x3F (6-bit)).
*/
void VREF_SetTrim2V1Val(VREF_Type *base, uint8_t trimValue);
/*!
* @brief Reads the value of the TRIM meaning output voltage (2V1).
*
* This function gets the TRIM value from the VREF_TRM4 register.
*
* @param base VREF peripheral address.
* @return Six-bit value of trim setting.
*/
static inline uint8_t VREF_GetTrim2V1Val(VREF_Type *base)
{
return (base->TRM4 & VREF_TRM4_TRIM2V1_MASK);
}
#endif /* FSL_FEATURE_VREF_HAS_TRM4 */
#if defined(FSL_FEATURE_VREF_HAS_LOW_REFERENCE) && FSL_FEATURE_VREF_HAS_LOW_REFERENCE
/*!
* @brief Sets the TRIM value for the low voltage reference.
*
* This function sets the TRIM value for low reference voltage.
* Note the following.
* - The TRIM value maximum is 0x05U
* - The values 111b and 110b are not valid/allowed.
*
* @param base VREF peripheral address.
* @param trimValue Value of the trim register to set output low reference voltage (maximum 0x05U (3-bit)).
*/
void VREF_SetLowReferenceTrimVal(VREF_Type *base, uint8_t trimValue);
/*!
* @brief Reads the value of the TRIM meaning output voltage.
*
* This function gets the TRIM value from the VREFL_TRM register.
*
* @param base VREF peripheral address.
* @return Three-bit value of the trim setting.
*/
static inline uint8_t VREF_GetLowReferenceTrimVal(VREF_Type *base)
{
return (base->VREFL_TRM & VREF_VREFL_TRM_VREFL_TRIM_MASK);
}
#endif /* FSL_FEATURE_VREF_HAS_LOW_REFERENCE */
/*@}*/
#if defined(__cplusplus)
}
#endif /* __cplusplus */
/*! @}*/
#endif /* _FSL_VREF_H_ */