rt-thread/bsp/frdm-k64f/device/MK64F12/fsl_dspi_edma.h

282 lines
13 KiB
C

/*
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_DSPI_EDMA_H_
#define _FSL_DSPI_EDMA_H_
#include "fsl_dspi.h"
#include "fsl_edma.h"
/*!
* @addtogroup dspi_edma_driver
* @{
*/
/***********************************************************************************************************************
* Definitions
**********************************************************************************************************************/
/*!
* @brief Forward declaration of the DSPI eDMA master handle typedefs.
*/
typedef struct _dspi_master_edma_handle dspi_master_edma_handle_t;
/*!
* @brief Forward declaration of the DSPI eDMA slave handle typedefs.
*/
typedef struct _dspi_slave_edma_handle dspi_slave_edma_handle_t;
/*!
* @brief Completion callback function pointer type.
*
* @param base DSPI peripheral base address.
* @param handle A pointer to the handle for the DSPI master.
* @param status Success or error code describing whether the transfer completed.
* @param userData An arbitrary pointer-dataSized value passed from the application.
*/
typedef void (*dspi_master_edma_transfer_callback_t)(SPI_Type *base,
dspi_master_edma_handle_t *handle,
status_t status,
void *userData);
/*!
* @brief Completion callback function pointer type.
*
* @param base DSPI peripheral base address.
* @param handle A pointer to the handle for the DSPI slave.
* @param status Success or error code describing whether the transfer completed.
* @param userData An arbitrary pointer-dataSized value passed from the application.
*/
typedef void (*dspi_slave_edma_transfer_callback_t)(SPI_Type *base,
dspi_slave_edma_handle_t *handle,
status_t status,
void *userData);
/*! @brief DSPI master eDMA transfer handle structure used for the transactional API. */
struct _dspi_master_edma_handle
{
uint32_t bitsPerFrame; /*!< The desired number of bits per frame. */
volatile uint32_t command; /*!< The desired data command. */
volatile uint32_t lastCommand; /*!< The desired last data command. */
uint8_t fifoSize; /*!< FIFO dataSize. */
volatile bool
isPcsActiveAfterTransfer; /*!< Indicates whether the PCS signal keeps active after the last frame transfer.*/
uint8_t nbytes; /*!< eDMA minor byte transfer count initially configured. */
volatile uint8_t state; /*!< DSPI transfer state , _dspi_transfer_state.*/
uint8_t *volatile txData; /*!< Send buffer. */
uint8_t *volatile rxData; /*!< Receive buffer. */
volatile size_t remainingSendByteCount; /*!< A number of bytes remaining to send.*/
volatile size_t remainingReceiveByteCount; /*!< A number of bytes remaining to receive.*/
size_t totalByteCount; /*!< A number of transfer bytes*/
uint32_t rxBuffIfNull; /*!< Used if there is not rxData for DMA purpose.*/
uint32_t txBuffIfNull; /*!< Used if there is not txData for DMA purpose.*/
dspi_master_edma_transfer_callback_t callback; /*!< Completion callback. */
void *userData; /*!< Callback user data. */
edma_handle_t *edmaRxRegToRxDataHandle; /*!<edma_handle_t handle point used for RxReg to RxData buff*/
edma_handle_t *edmaTxDataToIntermediaryHandle; /*!<edma_handle_t handle point used for TxData to Intermediary*/
edma_handle_t *edmaIntermediaryToTxRegHandle; /*!<edma_handle_t handle point used for Intermediary to TxReg*/
edma_tcd_t dspiSoftwareTCD[2]; /*!<SoftwareTCD , internal used*/
};
/*! @brief DSPI slave eDMA transfer handle structure used for the transactional API.*/
struct _dspi_slave_edma_handle
{
uint32_t bitsPerFrame; /*!< The desired number of bits per frame. */
uint8_t *volatile txData; /*!< Send buffer. */
uint8_t *volatile rxData; /*!< Receive buffer. */
volatile size_t remainingSendByteCount; /*!< A number of bytes remaining to send.*/
volatile size_t remainingReceiveByteCount; /*!< A number of bytes remaining to receive.*/
size_t totalByteCount; /*!< A number of transfer bytes*/
uint32_t rxBuffIfNull; /*!< Used if there is not rxData for DMA purpose.*/
uint32_t txBuffIfNull; /*!< Used if there is not txData for DMA purpose.*/
uint32_t txLastData; /*!< Used if there is an extra byte when 16bits per frame for DMA purpose.*/
uint8_t nbytes; /*!< eDMA minor byte transfer count initially configured. */
volatile uint8_t state; /*!< DSPI transfer state.*/
dspi_slave_edma_transfer_callback_t callback; /*!< Completion callback. */
void *userData; /*!< Callback user data. */
edma_handle_t *edmaRxRegToRxDataHandle; /*!<edma_handle_t handle point used for RxReg to RxData buff*/
edma_handle_t *edmaTxDataToTxRegHandle; /*!<edma_handle_t handle point used for TxData to TxReg*/
};
/***********************************************************************************************************************
* API
**********************************************************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /*_cplusplus*/
/*Transactional APIs*/
/*!
* @brief Initializes the DSPI master eDMA handle.
*
* This function initializes the DSPI eDMA handle which can be used for other DSPI transactional APIs. Usually, for a
* specified DSPI instance, call this API once to get the initialized handle.
*
* Note that DSPI eDMA has separated (RX and TX as two sources) or shared (RX and TX are the same source) DMA request
* source.
* (1) For the separated DMA request source, enable and set the RX DMAMUX source for edmaRxRegToRxDataHandle and
* TX DMAMUX source for edmaIntermediaryToTxRegHandle.
* (2) For the shared DMA request source, enable and set the RX/RX DMAMUX source for the edmaRxRegToRxDataHandle.
*
* @param base DSPI peripheral base address.
* @param handle DSPI handle pointer to dspi_master_edma_handle_t.
* @param callback DSPI callback.
* @param userData A callback function parameter.
* @param edmaRxRegToRxDataHandle edmaRxRegToRxDataHandle pointer to edma_handle_t.
* @param edmaTxDataToIntermediaryHandle edmaTxDataToIntermediaryHandle pointer to edma_handle_t.
* @param edmaIntermediaryToTxRegHandle edmaIntermediaryToTxRegHandle pointer to edma_handle_t.
*/
void DSPI_MasterTransferCreateHandleEDMA(SPI_Type *base,
dspi_master_edma_handle_t *handle,
dspi_master_edma_transfer_callback_t callback,
void *userData,
edma_handle_t *edmaRxRegToRxDataHandle,
edma_handle_t *edmaTxDataToIntermediaryHandle,
edma_handle_t *edmaIntermediaryToTxRegHandle);
/*!
* @brief DSPI master transfer data using eDMA.
*
* This function transfers data using eDMA. This is a non-blocking function, which returns right away. When all data
* is transferred, the callback function is called.
*
* @param base DSPI peripheral base address.
* @param handle A pointer to the dspi_master_edma_handle_t structure which stores the transfer state.
* @param transfer A pointer to the dspi_transfer_t structure.
* @return status of status_t.
*/
status_t DSPI_MasterTransferEDMA(SPI_Type *base, dspi_master_edma_handle_t *handle, dspi_transfer_t *transfer);
/*!
* @brief DSPI master aborts a transfer which is using eDMA.
*
* This function aborts a transfer which is using eDMA.
*
* @param base DSPI peripheral base address.
* @param handle A pointer to the dspi_master_edma_handle_t structure which stores the transfer state.
*/
void DSPI_MasterTransferAbortEDMA(SPI_Type *base, dspi_master_edma_handle_t *handle);
/*!
* @brief Gets the master eDMA transfer count.
*
* This function gets the master eDMA transfer count.
*
* @param base DSPI peripheral base address.
* @param handle A pointer to the dspi_master_edma_handle_t structure which stores the transfer state.
* @param count A number of bytes transferred by the non-blocking transaction.
* @return status of status_t.
*/
status_t DSPI_MasterTransferGetCountEDMA(SPI_Type *base, dspi_master_edma_handle_t *handle, size_t *count);
/*!
* @brief Initializes the DSPI slave eDMA handle.
*
* This function initializes the DSPI eDMA handle which can be used for other DSPI transactional APIs. Usually, for a
* specified DSPI instance, call this API once to get the initialized handle.
*
* Note that DSPI eDMA has separated (RN and TX in 2 sources) or shared (RX and TX are the same source) DMA request
* source.
* (1)For the separated DMA request source, enable and set the RX DMAMUX source for edmaRxRegToRxDataHandle and
* TX DMAMUX source for edmaTxDataToTxRegHandle.
* (2)For the shared DMA request source, enable and set the RX/RX DMAMUX source for the edmaRxRegToRxDataHandle.
*
* @param base DSPI peripheral base address.
* @param handle DSPI handle pointer to dspi_slave_edma_handle_t.
* @param callback DSPI callback.
* @param userData A callback function parameter.
* @param edmaRxRegToRxDataHandle edmaRxRegToRxDataHandle pointer to edma_handle_t.
* @param edmaTxDataToTxRegHandle edmaTxDataToTxRegHandle pointer to edma_handle_t.
*/
void DSPI_SlaveTransferCreateHandleEDMA(SPI_Type *base,
dspi_slave_edma_handle_t *handle,
dspi_slave_edma_transfer_callback_t callback,
void *userData,
edma_handle_t *edmaRxRegToRxDataHandle,
edma_handle_t *edmaTxDataToTxRegHandle);
/*!
* @brief DSPI slave transfer data using eDMA.
*
* This function transfers data using eDMA. This is a non-blocking function, which returns right away. When all data
* is transferred, the callback function is called.
* Note that the slave eDMA transfer doesn't support transfer_size is 1 when the bitsPerFrame is greater
* than eight.
* @param base DSPI peripheral base address.
* @param handle A pointer to the dspi_slave_edma_handle_t structure which stores the transfer state.
* @param transfer A pointer to the dspi_transfer_t structure.
* @return status of status_t.
*/
status_t DSPI_SlaveTransferEDMA(SPI_Type *base, dspi_slave_edma_handle_t *handle, dspi_transfer_t *transfer);
/*!
* @brief DSPI slave aborts a transfer which is using eDMA.
*
* This function aborts a transfer which is using eDMA.
*
* @param base DSPI peripheral base address.
* @param handle A pointer to the dspi_slave_edma_handle_t structure which stores the transfer state.
*/
void DSPI_SlaveTransferAbortEDMA(SPI_Type *base, dspi_slave_edma_handle_t *handle);
/*!
* @brief Gets the slave eDMA transfer count.
*
* This function gets the slave eDMA transfer count.
*
* @param base DSPI peripheral base address.
* @param handle A pointer to the dspi_slave_edma_handle_t structure which stores the transfer state.
* @param count A number of bytes transferred so far by the non-blocking transaction.
* @return status of status_t.
*/
status_t DSPI_SlaveTransferGetCountEDMA(SPI_Type *base, dspi_slave_edma_handle_t *handle, size_t *count);
#if defined(__cplusplus)
}
#endif /*_cplusplus*/
/*!
*@}
*/
#endif /*_FSL_DSPI_EDMA_H_*/