298 lines
7.4 KiB
C
298 lines
7.4 KiB
C
/*
|
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2020-08-08 thread-liu first version
|
|
*/
|
|
|
|
#include "board.h"
|
|
|
|
#include "mfxstm32l152.h"
|
|
#define DRV_DEBUG
|
|
#define LOG_TAG "drv.mfx"
|
|
#include <drv_log.h>
|
|
|
|
#define CHIP_ADDRESS 0x42 /* mfx address */
|
|
#define I2C_NAME "i2c2"
|
|
|
|
struct st_mfx
|
|
{
|
|
struct rt_device dev;
|
|
struct rt_i2c_bus_device *i2c_bus;
|
|
rt_uint8_t id;
|
|
rt_uint16_t type;
|
|
};
|
|
static struct st_mfx rt_mfx = {0};
|
|
static IO_DrvTypeDef *IoDrv = NULL;
|
|
|
|
static rt_err_t read_reg(struct rt_i2c_bus_device *bus, rt_uint8_t reg, rt_uint16_t len, rt_uint8_t *buf)
|
|
{
|
|
struct rt_i2c_msg msg[2] = {0, 0};
|
|
|
|
RT_ASSERT(bus != RT_NULL);
|
|
|
|
msg[0].addr = CHIP_ADDRESS;
|
|
msg[0].flags = RT_I2C_WR;
|
|
msg[0].buf = ®
|
|
msg[0].len = 1;
|
|
|
|
msg[1].addr = CHIP_ADDRESS;
|
|
msg[1].flags = RT_I2C_RD;
|
|
msg[1].len = len;
|
|
msg[1].buf = buf;
|
|
|
|
if (rt_i2c_transfer(bus, msg, 2) == 2)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
|
|
return RT_ERROR;
|
|
}
|
|
|
|
/* i2c write reg */
|
|
static rt_err_t write_reg(struct rt_i2c_bus_device *bus, rt_uint8_t reg, rt_uint8_t data)
|
|
{
|
|
rt_uint8_t buf[2];
|
|
struct rt_i2c_msg msgs;
|
|
|
|
RT_ASSERT(bus != RT_NULL);
|
|
buf[0] = reg;
|
|
buf[1] = data;
|
|
|
|
msgs.addr = CHIP_ADDRESS;
|
|
msgs.flags = RT_I2C_WR;
|
|
msgs.buf = buf;
|
|
msgs.len = sizeof(buf);
|
|
|
|
if (rt_i2c_transfer(bus, &msgs, 1) == 1)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
|
|
return RT_ERROR;
|
|
}
|
|
|
|
void MFX_IO_Init(void)
|
|
{
|
|
rt_mfx.i2c_bus = rt_i2c_bus_device_find(I2C_NAME);
|
|
if (rt_mfx.i2c_bus == RT_NULL)
|
|
{
|
|
LOG_E("can't find %c deivce", I2C_NAME);
|
|
}
|
|
}
|
|
|
|
void MFX_IO_DeInit(void)
|
|
{
|
|
}
|
|
|
|
void MFX_IO_ITConfig(void)
|
|
{
|
|
static rt_uint8_t mfx_io_it_enabled = 0;
|
|
GPIO_InitTypeDef gpio_init_structure;
|
|
|
|
if(mfx_io_it_enabled == 0)
|
|
{
|
|
mfx_io_it_enabled = 1;
|
|
/* Enable the GPIO EXTI clock */
|
|
__HAL_RCC_GPIOI_CLK_ENABLE();
|
|
|
|
gpio_init_structure.Pin = GPIO_PIN_8;
|
|
gpio_init_structure.Pull = GPIO_NOPULL;
|
|
gpio_init_structure.Speed = GPIO_SPEED_FREQ_LOW;
|
|
gpio_init_structure.Mode = GPIO_MODE_IT_RISING;
|
|
HAL_GPIO_Init(GPIOI, &gpio_init_structure);
|
|
|
|
/* Enable and set GPIO EXTI Interrupt to the lowest priority */
|
|
HAL_NVIC_SetPriority((IRQn_Type)(EXTI8_IRQn), 0x04, 0x00);
|
|
HAL_NVIC_EnableIRQ((IRQn_Type)(EXTI8_IRQn));
|
|
}
|
|
}
|
|
|
|
void MFX_IO_Write(rt_uint16_t Addr, rt_uint8_t Reg, rt_uint8_t Value)
|
|
{
|
|
write_reg(rt_mfx.i2c_bus, Reg, Value);
|
|
}
|
|
|
|
rt_uint8_t MFX_IO_Read(rt_uint16_t Addr, rt_uint8_t Reg)
|
|
{
|
|
rt_uint8_t value = 0;
|
|
read_reg(rt_mfx.i2c_bus, Reg, 1, &value);
|
|
|
|
return value;
|
|
}
|
|
|
|
rt_uint16_t MFX_IO_ReadMultiple(rt_uint16_t Addr, rt_uint8_t Reg, rt_uint8_t *Buffer, rt_uint16_t Length)
|
|
{
|
|
return read_reg(rt_mfx.i2c_bus, Reg, Length, Buffer);
|
|
}
|
|
|
|
RT_WEAK void MFX_IO_Delay(rt_uint32_t Delay)
|
|
{
|
|
rt_thread_delay(Delay);
|
|
}
|
|
|
|
RT_WEAK void MFX_IO_Wakeup(void)
|
|
{
|
|
}
|
|
|
|
RT_WEAK void MFX_IO_EnableWakeupPin(void)
|
|
{
|
|
}
|
|
|
|
rt_uint8_t BSP_IO_DeInit(void)
|
|
{
|
|
IoDrv = NULL;
|
|
return RT_EOK;
|
|
}
|
|
|
|
rt_uint32_t BSP_IO_ITGetStatus(rt_uint32_t IoPin)
|
|
{
|
|
/* Return the IO Pin IT status */
|
|
return (IoDrv->ITStatus(0, IoPin));
|
|
}
|
|
|
|
/**
|
|
* @brief Clears all the IO IT pending bits.
|
|
* @retval None
|
|
*/
|
|
void BSP_IO_ITClear(void)
|
|
{
|
|
/* Clear all IO IT pending bits */
|
|
IoDrv->ClearIT(0, MFXSTM32L152_GPIO_PINS_ALL);
|
|
}
|
|
|
|
void BSP_IO_ITClearPin(rt_uint32_t IO_Pins_To_Clear)
|
|
{
|
|
/* Clear only the selected list of IO IT pending bits */
|
|
IoDrv->ClearIT(0, IO_Pins_To_Clear);
|
|
}
|
|
|
|
/**
|
|
* @brief Configures the IO pin(s) according to IO mode structure value.
|
|
* @param IoPin: IO pin(s) to be configured.
|
|
* This parameter can be one of the following values:
|
|
* @arg MFXSTM32L152_GPIO_PIN_x: where x can be from 0 to 23.
|
|
* @param IoMode: IO pin mode to configure
|
|
* This parameter can be one of the following values:
|
|
* @arg IO_MODE_INPUT
|
|
* @arg IO_MODE_OUTPUT
|
|
* @arg IO_MODE_IT_RISING_EDGE
|
|
* @arg IO_MODE_IT_FALLING_EDGE
|
|
* @arg IO_MODE_IT_LOW_LEVEL
|
|
* @arg IO_MODE_IT_HIGH_LEVEL
|
|
* @arg IO_MODE_ANALOG
|
|
* @arg IO_MODE_OFF
|
|
* @arg IO_MODE_INPUT_PU,
|
|
* @arg IO_MODE_INPUT_PD,
|
|
* @arg IO_MODE_OUTPUT_OD,
|
|
* @arg IO_MODE_OUTPUT_OD_PU,
|
|
* @arg IO_MODE_OUTPUT_OD_PD,
|
|
* @arg IO_MODE_OUTPUT_PP,
|
|
* @arg IO_MODE_OUTPUT_PP_PU,
|
|
* @arg IO_MODE_OUTPUT_PP_PD,
|
|
* @arg IO_MODE_IT_RISING_EDGE_PU
|
|
* @arg IO_MODE_IT_FALLING_EDGE_PU
|
|
* @arg IO_MODE_IT_LOW_LEVEL_PU
|
|
* @arg IO_MODE_IT_HIGH_LEVEL_PU
|
|
* @arg IO_MODE_IT_RISING_EDGE_PD
|
|
* @arg IO_MODE_IT_FALLING_EDGE_PD
|
|
* @arg IO_MODE_IT_LOW_LEVEL_PD
|
|
* @arg IO_MODE_IT_HIGH_LEVEL_PD
|
|
* @retval RT_EOK if all initializations are OK. Other value if error.
|
|
*/
|
|
rt_uint8_t rt_mfx_pin_mode(rt_uint32_t IoPin, IO_ModeTypedef IoMode)
|
|
{
|
|
/* Configure the selected IO pin(s) mode */
|
|
IoDrv->Config(0, IoPin, IoMode);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
/**
|
|
* @brief Sets the IRQ_OUT pin polarity and type
|
|
* @param IoIrqOutPinPolarity: High/Low
|
|
* @param IoIrqOutPinType: OpenDrain/PushPull
|
|
* @retval OK
|
|
*/
|
|
rt_uint8_t rt_mfx_config_irq(rt_uint8_t IoIrqOutPinPolarity, rt_uint8_t IoIrqOutPinType)
|
|
{
|
|
if((rt_mfx.id == MFXSTM32L152_ID_1) || (rt_mfx.id == MFXSTM32L152_ID_2))
|
|
{
|
|
/* Initialize the IO driver structure */
|
|
mfxstm32l152_SetIrqOutPinPolarity(0, IoIrqOutPinPolarity);
|
|
mfxstm32l152_SetIrqOutPinType(0, IoIrqOutPinType);
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
/**
|
|
* @brief Sets the selected pins state.
|
|
* @param IoPin: Selected pins to write.
|
|
* This parameter can be any combination of the IO pins.
|
|
* @param PinState: New pins state to write
|
|
* @retval None
|
|
*/
|
|
void rt_mfx_pin_write(rt_uint32_t IoPin, rt_base_t PinState)
|
|
{
|
|
/* Set the Pin state */
|
|
IoDrv->WritePin(0, IoPin, PinState);
|
|
}
|
|
|
|
/**
|
|
* @brief Gets the selected pins current state.
|
|
* @param IoPin: Selected pins to read.
|
|
* This parameter can be any combination of the IO pins.
|
|
* @retval The current pins state
|
|
*/
|
|
rt_uint32_t rt_mfx_pin_read(rt_uint32_t IoPin)
|
|
{
|
|
return(IoDrv->ReadPin(0, IoPin));
|
|
}
|
|
|
|
/**
|
|
* @brief Toggles the selected pins state.
|
|
* @param IoPin: Selected pins to toggle.
|
|
* This parameter can be any combination of the IO pins.
|
|
* @note This function is only used to toggle one pin in the same time
|
|
* @retval None
|
|
*/
|
|
void rt_mfx_pin_toggle(rt_uint32_t IoPin)
|
|
{
|
|
/* Toggle the current pin state */
|
|
if(IoDrv->ReadPin(0, IoPin) != 0)
|
|
{
|
|
IoDrv->WritePin(0, IoPin, 0); /* Reset */
|
|
}
|
|
else
|
|
{
|
|
IoDrv->WritePin(0, IoPin, 1); /* Set */
|
|
}
|
|
}
|
|
|
|
int rt_mfx_init(void)
|
|
{
|
|
/* Read ID and verify the MFX is ready */
|
|
rt_mfx.id = mfxstm32l152_io_drv.ReadID(0);
|
|
if((rt_mfx.id == MFXSTM32L152_ID_1) || (rt_mfx.id == MFXSTM32L152_ID_2))
|
|
{
|
|
/* Initialize the IO driver structure */
|
|
IoDrv = &mfxstm32l152_io_drv;
|
|
|
|
/* Initialize MFX */
|
|
IoDrv->Init(0);
|
|
IoDrv->Start(0, IO_PIN_ALL);
|
|
|
|
LOG_I("mfx init success, id: 0x%x", rt_mfx.id);
|
|
|
|
return RT_EOK;
|
|
}
|
|
LOG_I("mfx init error, id: 0x%x", rt_mfx.id);
|
|
|
|
return RT_ERROR;
|
|
}
|
|
INIT_DEVICE_EXPORT(rt_mfx_init);
|