rt-thread/bsp/lm3s8962/Libraries/inc/hw_watchdog.h

177 lines
7.8 KiB
C

//*****************************************************************************
//
// hw_watchdog.h - Macros used when accessing the Watchdog Timer hardware.
//
// Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 8264 of the Stellaris Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_WATCHDOG_H__
#define __HW_WATCHDOG_H__
//*****************************************************************************
//
// The following are defines for the Watchdog Timer register offsets.
//
//*****************************************************************************
#define WDT_O_LOAD 0x00000000 // Watchdog Load
#define WDT_O_VALUE 0x00000004 // Watchdog Value
#define WDT_O_CTL 0x00000008 // Watchdog Control
#define WDT_O_ICR 0x0000000C // Watchdog Interrupt Clear
#define WDT_O_RIS 0x00000010 // Watchdog Raw Interrupt Status
#define WDT_O_MIS 0x00000014 // Watchdog Masked Interrupt Status
#define WDT_O_TEST 0x00000418 // Watchdog Test
#define WDT_O_LOCK 0x00000C00 // Watchdog Lock
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOAD register.
//
//*****************************************************************************
#define WDT_LOAD_M 0xFFFFFFFF // Watchdog Load Value
#define WDT_LOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_VALUE register.
//
//*****************************************************************************
#define WDT_VALUE_M 0xFFFFFFFF // Watchdog Value
#define WDT_VALUE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_CTL register.
//
//*****************************************************************************
#define WDT_CTL_WRC 0x80000000 // Write Complete
#define WDT_CTL_INTTYPE 0x00000004 // Watchdog Interrupt Type
#define WDT_CTL_RESEN 0x00000002 // Watchdog Reset Enable
#define WDT_CTL_INTEN 0x00000001 // Watchdog Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_ICR register.
//
//*****************************************************************************
#define WDT_ICR_M 0xFFFFFFFF // Watchdog Interrupt Clear
#define WDT_ICR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_RIS register.
//
//*****************************************************************************
#define WDT_RIS_WDTRIS 0x00000001 // Watchdog Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_MIS register.
//
//*****************************************************************************
#define WDT_MIS_WDTMIS 0x00000001 // Watchdog Masked Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_TEST register.
//
//*****************************************************************************
#define WDT_TEST_STALL 0x00000100 // Watchdog Stall Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOCK register.
//
//*****************************************************************************
#define WDT_LOCK_M 0xFFFFFFFF // Watchdog Lock
#define WDT_LOCK_UNLOCKED 0x00000000 // Unlocked
#define WDT_LOCK_LOCKED 0x00000001 // Locked
#define WDT_LOCK_UNLOCK 0x1ACCE551 // Unlocks the watchdog timer
//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_ISR, WDT_RIS, and
// WDT_MIS registers.
//
//*****************************************************************************
#define WDT_INT_TIMEOUT 0x00000001 // Watchdog timer expired
//*****************************************************************************
//
// The following definitions are deprecated.
//
//*****************************************************************************
#ifndef DEPRECATED
//*****************************************************************************
//
// The following are deprecated defines for the Watchdog Timer register
// offsets.
//
//*****************************************************************************
#define WDT_O_PeriphID4 0x00000FD0
#define WDT_O_PeriphID5 0x00000FD4
#define WDT_O_PeriphID6 0x00000FD8
#define WDT_O_PeriphID7 0x00000FDC
#define WDT_O_PeriphID0 0x00000FE0
#define WDT_O_PeriphID1 0x00000FE4
#define WDT_O_PeriphID2 0x00000FE8
#define WDT_O_PeriphID3 0x00000FEC
#define WDT_O_PCellID0 0x00000FF0
#define WDT_O_PCellID1 0x00000FF4
#define WDT_O_PCellID2 0x00000FF8
#define WDT_O_PCellID3 0x00000FFC
//*****************************************************************************
//
// The following are deprecated defines for the bit fields in the WDT_O_TEST
// register.
//
//*****************************************************************************
#define WDT_TEST_STALL_EN 0x00000100 // Watchdog stall enable
//*****************************************************************************
//
// The following are deprecated defines for the reset values for the WDT
// registers.
//
//*****************************************************************************
#define WDT_RV_VALUE 0xFFFFFFFF // Current value register
#define WDT_RV_LOAD 0xFFFFFFFF // Load register
#define WDT_RV_PCellID1 0x000000F0
#define WDT_RV_PCellID3 0x000000B1
#define WDT_RV_PeriphID1 0x00000018
#define WDT_RV_PeriphID2 0x00000018
#define WDT_RV_PCellID0 0x0000000D
#define WDT_RV_PCellID2 0x00000005
#define WDT_RV_PeriphID0 0x00000005
#define WDT_RV_PeriphID3 0x00000001
#define WDT_RV_PeriphID5 0x00000000
#define WDT_RV_RIS 0x00000000 // Raw interrupt status register
#define WDT_RV_CTL 0x00000000 // Control register
#define WDT_RV_PeriphID4 0x00000000
#define WDT_RV_PeriphID6 0x00000000
#define WDT_RV_PeriphID7 0x00000000
#define WDT_RV_LOCK 0x00000000 // Lock register
#define WDT_RV_MIS 0x00000000 // Masked interrupt status register
#endif
#endif // __HW_WATCHDOG_H__