754 lines
25 KiB
C
754 lines
25 KiB
C
//*****************************************************************************
|
|
//
|
|
// interrupt.c - Driver for the NVIC Interrupt Controller.
|
|
//
|
|
// Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
// laws. You may not combine this software with "viral" open-source
|
|
// software in order to form a larger program.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 8264 of the Stellaris Peripheral Driver Library.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \addtogroup interrupt_api
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include "inc/hw_ints.h"
|
|
#include "inc/hw_nvic.h"
|
|
#include "inc/hw_types.h"
|
|
#include "driverlib/cpu.h"
|
|
#include "driverlib/debug.h"
|
|
#include "driverlib/interrupt.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between priority grouping encodings and the number of
|
|
// preemption priority bits.
|
|
//
|
|
//*****************************************************************************
|
|
static const unsigned long g_pulPriority[] =
|
|
{
|
|
NVIC_APINT_PRIGROUP_0_8, NVIC_APINT_PRIGROUP_1_7, NVIC_APINT_PRIGROUP_2_6,
|
|
NVIC_APINT_PRIGROUP_3_5, NVIC_APINT_PRIGROUP_4_4, NVIC_APINT_PRIGROUP_5_3,
|
|
NVIC_APINT_PRIGROUP_6_2, NVIC_APINT_PRIGROUP_7_1
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between interrupt number and the register that contains
|
|
// the priority encoding for that interrupt.
|
|
//
|
|
//*****************************************************************************
|
|
static const unsigned long g_pulRegs[] =
|
|
{
|
|
0, NVIC_SYS_PRI1, NVIC_SYS_PRI2, NVIC_SYS_PRI3, NVIC_PRI0, NVIC_PRI1,
|
|
NVIC_PRI2, NVIC_PRI3, NVIC_PRI4, NVIC_PRI5, NVIC_PRI6, NVIC_PRI7,
|
|
NVIC_PRI8, NVIC_PRI9, NVIC_PRI10, NVIC_PRI11, NVIC_PRI12, NVIC_PRI13,
|
|
NVIC_PRI14, NVIC_PRI15, NVIC_PRI16, NVIC_PRI17, NVIC_PRI18, NVIC_PRI19,
|
|
NVIC_PRI20, NVIC_PRI21, NVIC_PRI22, NVIC_PRI23, NVIC_PRI24, NVIC_PRI25,
|
|
NVIC_PRI26, NVIC_PRI27, NVIC_PRI28, NVIC_PRI29, NVIC_PRI30, NVIC_PRI31,
|
|
NVIC_PRI32
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between interrupt number (for the peripheral interrupts
|
|
// only) and the register that contains the interrupt enable for that
|
|
// interrupt.
|
|
//
|
|
//*****************************************************************************
|
|
static const unsigned long g_pulEnRegs[] =
|
|
{
|
|
NVIC_EN0, NVIC_EN1, NVIC_EN2, NVIC_EN3, NVIC_EN4
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between interrupt number (for the peripheral interrupts
|
|
// only) and the register that contains the interrupt disable for that
|
|
// interrupt.
|
|
//
|
|
//*****************************************************************************
|
|
static const unsigned long g_pulDisRegs[] =
|
|
{
|
|
NVIC_DIS0, NVIC_DIS1, NVIC_DIS2, NVIC_DIS3, NVIC_DIS4
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between interrupt number (for the peripheral interrupts
|
|
// only) and the register that contains the interrupt pend for that interrupt.
|
|
//
|
|
//*****************************************************************************
|
|
static const unsigned long g_pulPendRegs[] =
|
|
{
|
|
NVIC_PEND0, NVIC_PEND1, NVIC_PEND2, NVIC_PEND3, NVIC_PEND4
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between interrupt number (for the peripheral interrupts
|
|
// only) and the register that contains the interrupt unpend for that
|
|
// interrupt.
|
|
//
|
|
//*****************************************************************************
|
|
static const unsigned long g_pulUnpendRegs[] =
|
|
{
|
|
NVIC_UNPEND0, NVIC_UNPEND1, NVIC_UNPEND2, NVIC_UNPEND3, NVIC_UNPEND4
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \internal
|
|
//! The default interrupt handler.
|
|
//!
|
|
//! This is the default interrupt handler for all interrupts. It simply loops
|
|
//! forever so that the system state is preserved for observation by a
|
|
//! debugger. Since interrupts should be disabled before unregistering the
|
|
//! corresponding handler, this should never be called.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
static void
|
|
IntDefaultHandler(void)
|
|
{
|
|
//
|
|
// Go into an infinite loop.
|
|
//
|
|
while(1)
|
|
{
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The processor vector table.
|
|
//
|
|
// This contains a list of the handlers for the various interrupt sources in
|
|
// the system. The layout of this list is defined by the hardware; assertion
|
|
// of an interrupt causes the processor to start executing directly at the
|
|
// address given in the corresponding location in this list.
|
|
//
|
|
//*****************************************************************************
|
|
#if defined(ewarm)
|
|
#pragma data_alignment=1024
|
|
static __no_init void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void) @ "VTABLE";
|
|
#elif defined(sourcerygxx)
|
|
static __attribute__((section(".cs3.region-head.ram")))
|
|
void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void) __attribute__ ((aligned(1024)));
|
|
#elif defined(ccs) || defined(DOXYGEN)
|
|
#pragma DATA_ALIGN(g_pfnRAMVectors, 1024)
|
|
#pragma DATA_SECTION(g_pfnRAMVectors, ".vtable")
|
|
void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void);
|
|
#else
|
|
static __attribute__((section("vtable")))
|
|
void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void) __attribute__ ((aligned(1024)));
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the processor interrupt.
|
|
//!
|
|
//! This function allows the processor to respond to interrupts. This function
|
|
//! does not affect the set of interrupts enabled in the interrupt controller;
|
|
//! it just gates the single interrupt from the controller to the processor.
|
|
//!
|
|
//! \note Previously, this function had no return value. As such, it was
|
|
//! possible to include <tt>interrupt.h</tt> and call this function without
|
|
//! having included <tt>hw_types.h</tt>. Now that the return is a
|
|
//! <tt>tBoolean</tt>, a compiler error occurs in this case. The solution
|
|
//! is to include <tt>hw_types.h</tt> before including <tt>interrupt.h</tt>.
|
|
//!
|
|
//! \return Returns \b true if interrupts were disabled when the function was
|
|
//! called or \b false if they were initially enabled.
|
|
//
|
|
//*****************************************************************************
|
|
tBoolean
|
|
IntMasterEnable(void)
|
|
{
|
|
//
|
|
// Enable processor interrupts.
|
|
//
|
|
return(CPUcpsie());
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables the processor interrupt.
|
|
//!
|
|
//! This function prevents the processor from receiving interrupts. This
|
|
//! function does not affect the set of interrupts enabled in the interrupt
|
|
//! controller; it just gates the single interrupt from the controller to the
|
|
//! processor.
|
|
//!
|
|
//! \note Previously, this function had no return value. As such, it was
|
|
//! possible to include <tt>interrupt.h</tt> and call this function without
|
|
//! having included <tt>hw_types.h</tt>. Now that the return is a
|
|
//! <tt>tBoolean</tt>, a compiler error occurs in this case. The solution
|
|
//! is to include <tt>hw_types.h</tt> before including <tt>interrupt.h</tt>.
|
|
//!
|
|
//! \return Returns \b true if interrupts were already disabled when the
|
|
//! function was called or \b false if they were initially enabled.
|
|
//
|
|
//*****************************************************************************
|
|
tBoolean
|
|
IntMasterDisable(void)
|
|
{
|
|
//
|
|
// Disable processor interrupts.
|
|
//
|
|
return(CPUcpsid());
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Registers a function to be called when an interrupt occurs.
|
|
//!
|
|
//! \param ulInterrupt specifies the interrupt in question.
|
|
//! \param pfnHandler is a pointer to the function to be called.
|
|
//!
|
|
//! This function is used to specify the handler function to be called when the
|
|
//! given interrupt is asserted to the processor. When the interrupt occurs,
|
|
//! if it is enabled (via IntEnable()), the handler function is called in
|
|
//! interrupt context. Because the handler function can preempt other code,
|
|
//! care must be taken to protect memory or peripherals that are accessed by
|
|
//! the handler and other non-handler code.
|
|
//!
|
|
//! \note The use of this function (directly or indirectly via a peripheral
|
|
//! driver interrupt register function) moves the interrupt vector table from
|
|
//! flash to SRAM. Therefore, care must be taken when linking the application
|
|
//! to ensure that the SRAM vector table is located at the beginning of SRAM;
|
|
//! otherwise the NVIC does not look in the correct portion of memory for the
|
|
//! vector table (it requires the vector table be on a 1 kB memory alignment).
|
|
//! Normally, the SRAM vector table is so placed via the use of linker scripts.
|
|
//! See the discussion of compile-time versus run-time interrupt handler
|
|
//! registration in the introduction to this chapter.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntRegister(unsigned long ulInterrupt, void (*pfnHandler)(void))
|
|
{
|
|
unsigned long ulIdx, ulValue;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ulInterrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Make sure that the RAM vector table is correctly aligned.
|
|
//
|
|
ASSERT(((unsigned long)g_pfnRAMVectors & 0x000003ff) == 0);
|
|
|
|
//
|
|
// See if the RAM vector table has been initialized.
|
|
//
|
|
if(HWREG(NVIC_VTABLE) != (unsigned long)g_pfnRAMVectors)
|
|
{
|
|
//
|
|
// Copy the vector table from the beginning of FLASH to the RAM vector
|
|
// table.
|
|
//
|
|
ulValue = HWREG(NVIC_VTABLE);
|
|
for(ulIdx = 0; ulIdx < NUM_INTERRUPTS; ulIdx++)
|
|
{
|
|
g_pfnRAMVectors[ulIdx] = (void (*)(void))HWREG((ulIdx * 4) +
|
|
ulValue);
|
|
}
|
|
|
|
//
|
|
// Point the NVIC at the RAM vector table.
|
|
//
|
|
HWREG(NVIC_VTABLE) = (unsigned long)g_pfnRAMVectors;
|
|
}
|
|
|
|
//
|
|
// Save the interrupt handler.
|
|
//
|
|
g_pfnRAMVectors[ulInterrupt] = pfnHandler;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Unregisters the function to be called when an interrupt occurs.
|
|
//!
|
|
//! \param ulInterrupt specifies the interrupt in question.
|
|
//!
|
|
//! This function is used to indicate that no handler should be called when the
|
|
//! given interrupt is asserted to the processor. The interrupt source is
|
|
//! automatically disabled (via IntDisable()) if necessary.
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntUnregister(unsigned long ulInterrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ulInterrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Reset the interrupt handler.
|
|
//
|
|
g_pfnRAMVectors[ulInterrupt] = IntDefaultHandler;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the priority grouping of the interrupt controller.
|
|
//!
|
|
//! \param ulBits specifies the number of bits of preemptable priority.
|
|
//!
|
|
//! This function specifies the split between preemptable priority levels and
|
|
//! subpriority levels in the interrupt priority specification. The range of
|
|
//! the grouping values are dependent upon the hardware implementation; on
|
|
//! the Stellaris family, three bits are available for hardware interrupt
|
|
//! prioritization and therefore priority grouping values of three through
|
|
//! seven have the same effect.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntPriorityGroupingSet(unsigned long ulBits)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ulBits < NUM_PRIORITY);
|
|
|
|
//
|
|
// Set the priority grouping.
|
|
//
|
|
HWREG(NVIC_APINT) = NVIC_APINT_VECTKEY | g_pulPriority[ulBits];
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the priority grouping of the interrupt controller.
|
|
//!
|
|
//! This function returns the split between preemptable priority levels and
|
|
//! subpriority levels in the interrupt priority specification.
|
|
//!
|
|
//! \return The number of bits of preemptable priority.
|
|
//
|
|
//*****************************************************************************
|
|
unsigned long
|
|
IntPriorityGroupingGet(void)
|
|
{
|
|
unsigned long ulLoop, ulValue;
|
|
|
|
//
|
|
// Read the priority grouping.
|
|
//
|
|
ulValue = HWREG(NVIC_APINT) & NVIC_APINT_PRIGROUP_M;
|
|
|
|
//
|
|
// Loop through the priority grouping values.
|
|
//
|
|
for(ulLoop = 0; ulLoop < NUM_PRIORITY; ulLoop++)
|
|
{
|
|
//
|
|
// Stop looping if this value matches.
|
|
//
|
|
if(ulValue == g_pulPriority[ulLoop])
|
|
{
|
|
break;
|
|
}
|
|
}
|
|
|
|
//
|
|
// Return the number of priority bits.
|
|
//
|
|
return(ulLoop);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the priority of an interrupt.
|
|
//!
|
|
//! \param ulInterrupt specifies the interrupt in question.
|
|
//! \param ucPriority specifies the priority of the interrupt.
|
|
//!
|
|
//! This function is used to set the priority of an interrupt. When multiple
|
|
//! interrupts are asserted simultaneously, the ones with the highest priority
|
|
//! are processed before the lower priority interrupts. Smaller numbers
|
|
//! correspond to higher interrupt priorities; priority 0 is the highest
|
|
//! interrupt priority.
|
|
//!
|
|
//! The hardware priority mechanism only looks at the upper N bits of the
|
|
//! priority level (where N is 3 for the Stellaris family), so any
|
|
//! prioritization must be performed in those bits. The remaining bits can be
|
|
//! used to sub-prioritize the interrupt sources, and may be used by the
|
|
//! hardware priority mechanism on a future part. This arrangement allows
|
|
//! priorities to migrate to different NVIC implementations without changing
|
|
//! the gross prioritization of the interrupts.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntPrioritySet(unsigned long ulInterrupt, unsigned char ucPriority)
|
|
{
|
|
unsigned long ulTemp;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulInterrupt >= 4) && (ulInterrupt < NUM_INTERRUPTS));
|
|
|
|
//
|
|
// Set the interrupt priority.
|
|
//
|
|
ulTemp = HWREG(g_pulRegs[ulInterrupt >> 2]);
|
|
ulTemp &= ~(0xFF << (8 * (ulInterrupt & 3)));
|
|
ulTemp |= ucPriority << (8 * (ulInterrupt & 3));
|
|
HWREG(g_pulRegs[ulInterrupt >> 2]) = ulTemp;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the priority of an interrupt.
|
|
//!
|
|
//! \param ulInterrupt specifies the interrupt in question.
|
|
//!
|
|
//! This function gets the priority of an interrupt. See IntPrioritySet() for
|
|
//! a definition of the priority value.
|
|
//!
|
|
//! \return Returns the interrupt priority, or -1 if an invalid interrupt was
|
|
//! specified.
|
|
//
|
|
//*****************************************************************************
|
|
long
|
|
IntPriorityGet(unsigned long ulInterrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulInterrupt >= 4) && (ulInterrupt < NUM_INTERRUPTS));
|
|
|
|
//
|
|
// Return the interrupt priority.
|
|
//
|
|
return((HWREG(g_pulRegs[ulInterrupt >> 2]) >> (8 * (ulInterrupt & 3))) &
|
|
0xFF);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables an interrupt.
|
|
//!
|
|
//! \param ulInterrupt specifies the interrupt to be enabled.
|
|
//!
|
|
//! The specified interrupt is enabled in the interrupt controller. Other
|
|
//! enables for the interrupt (such as at the peripheral level) are unaffected
|
|
//! by this function.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntEnable(unsigned long ulInterrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ulInterrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Determine the interrupt to enable.
|
|
//
|
|
if(ulInterrupt == FAULT_MPU)
|
|
{
|
|
//
|
|
// Enable the MemManage interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) |= NVIC_SYS_HND_CTRL_MEM;
|
|
}
|
|
else if(ulInterrupt == FAULT_BUS)
|
|
{
|
|
//
|
|
// Enable the bus fault interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) |= NVIC_SYS_HND_CTRL_BUS;
|
|
}
|
|
else if(ulInterrupt == FAULT_USAGE)
|
|
{
|
|
//
|
|
// Enable the usage fault interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) |= NVIC_SYS_HND_CTRL_USAGE;
|
|
}
|
|
else if(ulInterrupt == FAULT_SYSTICK)
|
|
{
|
|
//
|
|
// Enable the System Tick interrupt.
|
|
//
|
|
HWREG(NVIC_ST_CTRL) |= NVIC_ST_CTRL_INTEN;
|
|
}
|
|
else if(ulInterrupt >= 16)
|
|
{
|
|
//
|
|
// Enable the general interrupt.
|
|
//
|
|
HWREG(g_pulEnRegs[(ulInterrupt - 16) / 32]) =
|
|
1 << ((ulInterrupt - 16) & 31);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables an interrupt.
|
|
//!
|
|
//! \param ulInterrupt specifies the interrupt to be disabled.
|
|
//!
|
|
//! The specified interrupt is disabled in the interrupt controller. Other
|
|
//! enables for the interrupt (such as at the peripheral level) are unaffected
|
|
//! by this function.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntDisable(unsigned long ulInterrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ulInterrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Determine the interrupt to disable.
|
|
//
|
|
if(ulInterrupt == FAULT_MPU)
|
|
{
|
|
//
|
|
// Disable the MemManage interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) &= ~(NVIC_SYS_HND_CTRL_MEM);
|
|
}
|
|
else if(ulInterrupt == FAULT_BUS)
|
|
{
|
|
//
|
|
// Disable the bus fault interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) &= ~(NVIC_SYS_HND_CTRL_BUS);
|
|
}
|
|
else if(ulInterrupt == FAULT_USAGE)
|
|
{
|
|
//
|
|
// Disable the usage fault interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) &= ~(NVIC_SYS_HND_CTRL_USAGE);
|
|
}
|
|
else if(ulInterrupt == FAULT_SYSTICK)
|
|
{
|
|
//
|
|
// Disable the System Tick interrupt.
|
|
//
|
|
HWREG(NVIC_ST_CTRL) &= ~(NVIC_ST_CTRL_INTEN);
|
|
}
|
|
else if(ulInterrupt >= 16)
|
|
{
|
|
//
|
|
// Disable the general interrupt.
|
|
//
|
|
HWREG(g_pulDisRegs[(ulInterrupt - 16) / 32]) =
|
|
1 << ((ulInterrupt - 16) & 31);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Pends an interrupt.
|
|
//!
|
|
//! \param ulInterrupt specifies the interrupt to be pended.
|
|
//!
|
|
//! The specified interrupt is pended in the interrupt controller. Pending an
|
|
//! interrupt causes the interrupt controller to execute the corresponding
|
|
//! interrupt handler at the next available time, based on the current
|
|
//! interrupt state priorities. For example, if called by a higher priority
|
|
//! interrupt handler, the specified interrupt handler is not called until
|
|
//! after the current interrupt handler has completed execution. The interrupt
|
|
//! must have been enabled for it to be called.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntPendSet(unsigned long ulInterrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ulInterrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Determine the interrupt to pend.
|
|
//
|
|
if(ulInterrupt == FAULT_NMI)
|
|
{
|
|
//
|
|
// Pend the NMI interrupt.
|
|
//
|
|
HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_NMI_SET;
|
|
}
|
|
else if(ulInterrupt == FAULT_PENDSV)
|
|
{
|
|
//
|
|
// Pend the PendSV interrupt.
|
|
//
|
|
HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_PEND_SV;
|
|
}
|
|
else if(ulInterrupt == FAULT_SYSTICK)
|
|
{
|
|
//
|
|
// Pend the SysTick interrupt.
|
|
//
|
|
HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_PENDSTSET;
|
|
}
|
|
else if(ulInterrupt >= 16)
|
|
{
|
|
//
|
|
// Pend the general interrupt.
|
|
//
|
|
HWREG(g_pulPendRegs[(ulInterrupt - 16) / 32]) =
|
|
1 << ((ulInterrupt - 16) & 31);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Unpends an interrupt.
|
|
//!
|
|
//! \param ulInterrupt specifies the interrupt to be unpended.
|
|
//!
|
|
//! The specified interrupt is unpended in the interrupt controller. Unpending
|
|
//! an interrupt causes any previously generated interrupts that have not been
|
|
//! handled yet (due to higher priority interrupts or the interrupt not having
|
|
//! been enabled yet) to be discarded.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntPendClear(unsigned long ulInterrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ulInterrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Determine the interrupt to unpend.
|
|
//
|
|
if(ulInterrupt == FAULT_PENDSV)
|
|
{
|
|
//
|
|
// Unpend the PendSV interrupt.
|
|
//
|
|
HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_UNPEND_SV;
|
|
}
|
|
else if(ulInterrupt == FAULT_SYSTICK)
|
|
{
|
|
//
|
|
// Unpend the SysTick interrupt.
|
|
//
|
|
HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_PENDSTCLR;
|
|
}
|
|
else if(ulInterrupt >= 16)
|
|
{
|
|
//
|
|
// Unpend the general interrupt.
|
|
//
|
|
HWREG(g_pulUnpendRegs[(ulInterrupt - 16) / 32]) =
|
|
1 << ((ulInterrupt - 16) & 31);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the priority masking level
|
|
//!
|
|
//! \param ulPriorityMask is the priority level that is masked.
|
|
//!
|
|
//! This function sets the interrupt priority masking level so that all
|
|
//! interrupts at the specified or lesser priority level are masked. Masking
|
|
//! interrupts can be used to globally disable a set of interrupts with
|
|
//! priority below a predetermined threshold. A value of 0 disables priority
|
|
//! masking.
|
|
//!
|
|
//! Smaller numbers correspond to higher interrupt priorities. So for example
|
|
//! a priority level mask of 4 allows interrupts of priority level 0-3,
|
|
//! and interrupts with a numerical priority of 4 and greater are blocked.
|
|
//!
|
|
//! The hardware priority mechanism only looks at the upper N bits of the
|
|
//! priority level (where N is 3 for the Stellaris family), so any
|
|
//! prioritization must be performed in those bits.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntPriorityMaskSet(unsigned long ulPriorityMask)
|
|
{
|
|
CPUbasepriSet(ulPriorityMask);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the priority masking level
|
|
//!
|
|
//! This function gets the current setting of the interrupt priority masking
|
|
//! level. The value returned is the priority level such that all interrupts
|
|
//! of that and lesser priority are masked. A value of 0 means that priority
|
|
//! masking is disabled.
|
|
//!
|
|
//! Smaller numbers correspond to higher interrupt priorities. So for example
|
|
//! a priority level mask of 4 allows interrupts of priority level 0-3,
|
|
//! and interrupts with a numerical priority of 4 and greater are blocked.
|
|
//!
|
|
//! The hardware priority mechanism only looks at the upper N bits of the
|
|
//! priority level (where N is 3 for the Stellaris family), so any
|
|
//! prioritization must be performed in those bits.
|
|
//!
|
|
//! \return Returns the value of the interrupt priority level mask.
|
|
//
|
|
//*****************************************************************************
|
|
unsigned long
|
|
IntPriorityMaskGet(void)
|
|
{
|
|
return(CPUbasepriGet());
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Close the Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|