165 lines
7.2 KiB
C
165 lines
7.2 KiB
C
/*!
|
|
\file gd32vf103_exmc.c
|
|
\brief EXMC driver
|
|
|
|
\version 2019-6-5, V1.0.0, firmware for GD32VF103
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2019, GigaDevice Semiconductor Inc.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "gd32vf103_exmc.h"
|
|
|
|
/* EXMC bank0 register reset value */
|
|
#define BANK0_SNCTL0_REGION_RESET ((uint32_t)0x000030DAU)
|
|
#define BANK0_SNTCFG_RESET ((uint32_t)0x0FFFFFFFU)
|
|
|
|
/* EXMC register bit offset */
|
|
#define SNCTL_NRMUX_OFFSET ((uint32_t)1U)
|
|
#define SNCTL_WREN_OFFSET ((uint32_t)12U)
|
|
#define SNCTL_NRWTEN_OFFSET ((uint32_t)13U)
|
|
#define SNCTL_ASYNCWAIT_OFFSET ((uint32_t)15U)
|
|
|
|
#define SNTCFG_AHLD_OFFSET ((uint32_t)4U)
|
|
#define SNTCFG_DSET_OFFSET ((uint32_t)8U)
|
|
#define SNTCFG_BUSLAT_OFFSET ((uint32_t)16U)
|
|
|
|
/*!
|
|
\brief deinitialize EXMC NOR/SRAM region
|
|
\param[in] norsram_region: select the region of bank0
|
|
\arg EXMC_BANK0_NORSRAM_REGIONx(x=0)
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exmc_norsram_deinit(uint32_t norsram_region)
|
|
{
|
|
/* reset the registers */
|
|
if(EXMC_BANK0_NORSRAM_REGION0 == norsram_region){
|
|
EXMC_SNCTL(norsram_region) = BANK0_SNCTL0_REGION_RESET;
|
|
}
|
|
|
|
EXMC_SNTCFG(norsram_region) = BANK0_SNTCFG_RESET;
|
|
}
|
|
|
|
/*!
|
|
\brief initialize the structure exmc_norsram_parameter_struct
|
|
\param[in] none
|
|
\param[out] exmc_norsram_init_struct: the initialized structure exmc_norsram_parameter_struct pointer
|
|
\retval none
|
|
*/
|
|
void exmc_norsram_struct_para_init(exmc_norsram_parameter_struct* exmc_norsram_init_struct)
|
|
{
|
|
/* configure the structure with default value */
|
|
exmc_norsram_init_struct->norsram_region = EXMC_BANK0_NORSRAM_REGION0;
|
|
exmc_norsram_init_struct->address_data_mux = ENABLE;
|
|
exmc_norsram_init_struct->memory_type = EXMC_MEMORY_TYPE_SRAM;
|
|
exmc_norsram_init_struct->databus_width = EXMC_NOR_DATABUS_WIDTH_16B;
|
|
exmc_norsram_init_struct->nwait_polarity = EXMC_NWAIT_POLARITY_LOW;
|
|
exmc_norsram_init_struct->memory_write = ENABLE;
|
|
exmc_norsram_init_struct->nwait_signal = ENABLE;
|
|
exmc_norsram_init_struct->asyn_wait = DISABLE;
|
|
|
|
/* read/write timing configure */
|
|
exmc_norsram_init_struct->read_write_timing->asyn_address_setuptime = 0xFU;
|
|
exmc_norsram_init_struct->read_write_timing->asyn_address_holdtime = 0xFU;
|
|
exmc_norsram_init_struct->read_write_timing->asyn_data_setuptime = 0xFFU;
|
|
exmc_norsram_init_struct->read_write_timing->bus_latency = 0xFU;
|
|
}
|
|
|
|
/*!
|
|
\brief initialize EXMC NOR/SRAM region
|
|
\param[in] exmc_norsram_parameter_struct: configure the EXMC NOR/SRAM parameter
|
|
norsram_region: EXMC_BANK0_NORSRAM_REGIONx,x=0
|
|
asyn_wait: ENABLE or DISABLE
|
|
nwait_signal: ENABLE or DISABLE
|
|
memory_write: ENABLE or DISABLE
|
|
nwait_polarity: EXMC_NWAIT_POLARITY_LOW,EXMC_NWAIT_POLARITY_HIGH
|
|
databus_width: EXMC_NOR_DATABUS_WIDTH_8B,EXMC_NOR_DATABUS_WIDTH_16B
|
|
memory_type: EXMC_MEMORY_TYPE_SRAM,EXMC_MEMORY_TYPE_PSRAM,EXMC_MEMORY_TYPE_NOR
|
|
address_data_mux: ENABLE
|
|
read_write_timing: structure exmc_norsram_timing_parameter_struct set the time
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exmc_norsram_init(exmc_norsram_parameter_struct* exmc_norsram_init_struct)
|
|
{
|
|
uint32_t snctl = 0x00000000U, sntcfg = 0x00000000U;
|
|
|
|
/* get the register value */
|
|
snctl = EXMC_SNCTL(exmc_norsram_init_struct->norsram_region);
|
|
|
|
/* clear relative bits */
|
|
snctl &= ((uint32_t)~(EXMC_SNCTL_NREN | EXMC_SNCTL_NRTP | EXMC_SNCTL_NRW | EXMC_SNCTL_NRWTPOL |
|
|
EXMC_SNCTL_WREN | EXMC_SNCTL_NRWTEN | EXMC_SNCTL_ASYNCWAIT | EXMC_SNCTL_NRMUX));
|
|
|
|
snctl |= (uint32_t)(exmc_norsram_init_struct->address_data_mux << SNCTL_NRMUX_OFFSET) |
|
|
exmc_norsram_init_struct->memory_type |
|
|
exmc_norsram_init_struct->databus_width |
|
|
exmc_norsram_init_struct->nwait_polarity |
|
|
(exmc_norsram_init_struct->memory_write << SNCTL_WREN_OFFSET) |
|
|
(exmc_norsram_init_struct->nwait_signal << SNCTL_NRWTEN_OFFSET) |
|
|
(exmc_norsram_init_struct->asyn_wait << SNCTL_ASYNCWAIT_OFFSET);
|
|
|
|
sntcfg = (uint32_t)((exmc_norsram_init_struct->read_write_timing->asyn_address_setuptime - 1U ) & EXMC_SNTCFG_ASET )|
|
|
(((exmc_norsram_init_struct->read_write_timing->asyn_address_holdtime - 1U ) << SNTCFG_AHLD_OFFSET ) & EXMC_SNTCFG_AHLD ) |
|
|
(((exmc_norsram_init_struct->read_write_timing->asyn_data_setuptime - 1U ) << SNTCFG_DSET_OFFSET ) & EXMC_SNTCFG_DSET ) |
|
|
(((exmc_norsram_init_struct->read_write_timing->bus_latency - 1U ) << SNTCFG_BUSLAT_OFFSET ) & EXMC_SNTCFG_BUSLAT );
|
|
|
|
/* nor flash access enable */
|
|
if(EXMC_MEMORY_TYPE_NOR == exmc_norsram_init_struct->memory_type){
|
|
snctl |= (uint32_t)EXMC_SNCTL_NREN;
|
|
}
|
|
|
|
/* configure the registers */
|
|
EXMC_SNCTL(exmc_norsram_init_struct->norsram_region) = snctl;
|
|
EXMC_SNTCFG(exmc_norsram_init_struct->norsram_region) = sntcfg;
|
|
}
|
|
|
|
/*!
|
|
\brief enable EXMC NOR/PSRAM bank region
|
|
\param[in] norsram_region: specify the region of NOR/PSRAM bank
|
|
\arg EXMC_BANK0_NORSRAM_REGIONx(x=0)
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exmc_norsram_enable(uint32_t norsram_region)
|
|
{
|
|
EXMC_SNCTL(norsram_region) |= (uint32_t)EXMC_SNCTL_NRBKEN;
|
|
}
|
|
|
|
/*!
|
|
\brief disable EXMC NOR/PSRAM bank region
|
|
\param[in] norsram_region: specify the region of NOR/PSRAM bank
|
|
\arg EXMC_BANK0_NORSRAM_REGIONx(x=0)
|
|
\param[out] none
|
|
\retval none
|
|
*/
|
|
void exmc_norsram_disable(uint32_t norsram_region)
|
|
{
|
|
EXMC_SNCTL(norsram_region) &= ~(uint32_t)EXMC_SNCTL_NRBKEN;
|
|
}
|