355 lines
11 KiB
C
355 lines
11 KiB
C
/*
|
|
* File : drv_usart.c
|
|
* This file is part of RT-Thread RTOS
|
|
* COPYRIGHT (C) 2015, RT-Thread Development Team
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2009-01-05 Bernard the first version
|
|
* 2015-08-01 xiaonong the first version for stm32f7xx
|
|
* 2016-01-15 ArdaFu the first version for stm32f4xx with STM32 HAL
|
|
* 2016-01-15 zyh the first version for stm32f401rc with STM32 HAL
|
|
*/
|
|
#include "drv_usart.h"
|
|
#include "board.h"
|
|
#include <rtdevice.h>
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
/* STM32 uart driver */
|
|
struct drv_uart
|
|
{
|
|
UART_HandleTypeDef UartHandle;
|
|
IRQn_Type irq;
|
|
};
|
|
|
|
static rt_err_t drv_configure(struct rt_serial_device *serial,
|
|
struct serial_configure *cfg)
|
|
{
|
|
struct drv_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
uart = (struct drv_uart *)serial->parent.user_data;
|
|
uart->UartHandle.Init.BaudRate = cfg->baud_rate;
|
|
uart->UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
uart->UartHandle.Init.Mode = UART_MODE_TX_RX;
|
|
uart->UartHandle.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
switch (cfg->data_bits)
|
|
{
|
|
case DATA_BITS_8:
|
|
uart->UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
|
|
break;
|
|
case DATA_BITS_9:
|
|
uart->UartHandle.Init.WordLength = UART_WORDLENGTH_9B;
|
|
break;
|
|
default:
|
|
uart->UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
|
|
break;
|
|
}
|
|
switch (cfg->stop_bits)
|
|
{
|
|
case STOP_BITS_1:
|
|
uart->UartHandle.Init.StopBits = UART_STOPBITS_1;
|
|
break;
|
|
case STOP_BITS_2:
|
|
uart->UartHandle.Init.StopBits = UART_STOPBITS_2;
|
|
break;
|
|
default:
|
|
uart->UartHandle.Init.StopBits = UART_STOPBITS_1;
|
|
break;
|
|
}
|
|
switch (cfg->parity)
|
|
{
|
|
case PARITY_NONE:
|
|
uart->UartHandle.Init.Parity = UART_PARITY_NONE;
|
|
break;
|
|
case PARITY_ODD:
|
|
uart->UartHandle.Init.Parity = UART_PARITY_ODD;
|
|
break;
|
|
case PARITY_EVEN:
|
|
uart->UartHandle.Init.Parity = UART_PARITY_EVEN;
|
|
break;
|
|
default:
|
|
uart->UartHandle.Init.Parity = UART_PARITY_NONE;
|
|
break;
|
|
}
|
|
if (HAL_UART_Init(&uart->UartHandle) != HAL_OK)
|
|
{
|
|
return RT_ERROR;
|
|
}
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t drv_control(struct rt_serial_device *serial,
|
|
int cmd, void *arg)
|
|
{
|
|
struct drv_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct drv_uart *)serial->parent.user_data;
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* disable rx irq */
|
|
NVIC_DisableIRQ(uart->irq);
|
|
/* disable interrupt */
|
|
__HAL_UART_DISABLE_IT(&uart->UartHandle, UART_IT_RXNE);
|
|
break;
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* enable rx irq */
|
|
NVIC_EnableIRQ(uart->irq);
|
|
/* enable interrupt */
|
|
__HAL_UART_ENABLE_IT(&uart->UartHandle, UART_IT_RXNE);
|
|
break;
|
|
}
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int drv_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
struct drv_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct drv_uart *)serial->parent.user_data;
|
|
while ((__HAL_UART_GET_FLAG(&uart->UartHandle, UART_FLAG_TXE) == RESET));
|
|
uart->UartHandle.Instance->DR = c;
|
|
return 1;
|
|
}
|
|
|
|
static int drv_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch;
|
|
struct drv_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct drv_uart *)serial->parent.user_data;
|
|
ch = -1;
|
|
if (__HAL_UART_GET_FLAG(&uart->UartHandle, UART_FLAG_RXNE) != RESET)
|
|
ch = uart->UartHandle.Instance->DR & 0xff;
|
|
return ch;
|
|
}
|
|
|
|
static const struct rt_uart_ops drv_uart_ops =
|
|
{
|
|
drv_configure,
|
|
drv_control,
|
|
drv_putc,
|
|
drv_getc,
|
|
};
|
|
|
|
#if defined(RT_USING_UART1)
|
|
/* UART1 device driver structure */
|
|
static struct drv_uart uart1;
|
|
struct rt_serial_device serial1;
|
|
void USART1_IRQHandler(void)
|
|
{
|
|
struct drv_uart *uart;
|
|
uart = &uart1;
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
/* UART in mode Receiver -------------------------------------------------*/
|
|
if ((__HAL_UART_GET_FLAG(&uart->UartHandle, UART_FLAG_RXNE) != RESET) &&
|
|
(__HAL_UART_GET_IT_SOURCE(&uart->UartHandle, UART_IT_RXNE) != RESET))
|
|
{
|
|
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
|
|
/* Clear RXNE interrupt flag */
|
|
__HAL_UART_CLEAR_FLAG(&uart->UartHandle, UART_FLAG_RXNE);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* RT_USING_UART1 */
|
|
|
|
#if defined(RT_USING_UART2)
|
|
/* UART2 device driver structure */
|
|
static struct drv_uart uart2;
|
|
struct rt_serial_device serial2;
|
|
void USART2_IRQHandler(void)
|
|
{
|
|
struct drv_uart *uart;
|
|
uart = &uart2;
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
/* UART in mode Receiver -------------------------------------------------*/
|
|
if ((__HAL_UART_GET_FLAG(&uart->UartHandle, UART_FLAG_RXNE) != RESET) &&
|
|
(__HAL_UART_GET_IT_SOURCE(&uart->UartHandle, UART_IT_RXNE) != RESET))
|
|
{
|
|
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
|
|
/* Clear RXNE interrupt flag */
|
|
__HAL_UART_CLEAR_FLAG(&uart->UartHandle, UART_FLAG_RXNE);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* RT_USING_UART2 */
|
|
|
|
#if defined(RT_USING_UART6)
|
|
/* UART2 device driver structure */
|
|
static struct drv_uart uart6;
|
|
struct rt_serial_device serial6;
|
|
void USART6_IRQHandler(void)
|
|
{
|
|
struct drv_uart *uart;
|
|
uart = &uart6;
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
/* UART in mode Receiver -------------------------------------------------*/
|
|
if ((__HAL_UART_GET_FLAG(&uart->UartHandle, UART_FLAG_RXNE) != RESET) &&
|
|
(__HAL_UART_GET_IT_SOURCE(&uart->UartHandle, UART_IT_RXNE) != RESET))
|
|
{
|
|
rt_hw_serial_isr(&serial6, RT_SERIAL_EVENT_RX_IND);
|
|
/* Clear RXNE interrupt flag */
|
|
__HAL_UART_CLEAR_FLAG(&uart->UartHandle, UART_FLAG_RXNE);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* RT_USING_UART3 */
|
|
|
|
/**
|
|
* @brief UART MSP Initialization
|
|
* This function configures the hardware resources used in this example:
|
|
* - Peripheral's clock enable
|
|
* - Peripheral's GPIO Configuration
|
|
* - NVIC configuration for UART interrupt request enable
|
|
* @param huart: UART handle pointer
|
|
* @retval None
|
|
*/
|
|
void HAL_UART_MspInit(UART_HandleTypeDef *uartHandle)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
if (uartHandle->Instance == USART1)
|
|
{
|
|
/* USART1 clock enable */
|
|
__HAL_RCC_USART1_CLK_ENABLE();
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**USART1 GPIO Configuration
|
|
PA9 ------> USART1_TX
|
|
PA10 ------> USART1_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_10;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
}
|
|
else if (uartHandle->Instance == USART2)
|
|
{
|
|
/* USART2 clock enable */
|
|
__HAL_RCC_USART2_CLK_ENABLE();
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
/**USART2 GPIO Configuration
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_2 | GPIO_PIN_3;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
}
|
|
else if (uartHandle->Instance == USART6)
|
|
{
|
|
/* USART6 clock enable */
|
|
__HAL_RCC_USART6_CLK_ENABLE();
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
/**USART6 GPIO Configuration
|
|
PC6 ------> USART6_TX
|
|
PC7 ------> USART6_RX
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_6 | GPIO_PIN_7;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF8_USART6;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
}
|
|
}
|
|
|
|
void HAL_UART_MspDeInit(UART_HandleTypeDef *uartHandle)
|
|
{
|
|
if (uartHandle->Instance == USART1)
|
|
{
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART1_CLK_DISABLE();
|
|
/**USART1 GPIO Configuration
|
|
PA9 ------> USART1_TX
|
|
PA10 ------> USART1_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9 | GPIO_PIN_10);
|
|
}
|
|
else if (uartHandle->Instance == USART2)
|
|
{
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART2_CLK_DISABLE();
|
|
/**USART2 GPIO Configuration
|
|
PA2 ------> USART2_TX
|
|
PA3 ------> USART2_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2 | GPIO_PIN_3);
|
|
}
|
|
else if (uartHandle->Instance == USART6)
|
|
{
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USART6_CLK_DISABLE();
|
|
/**USART6 GPIO Configuration
|
|
PC6 ------> USART6_TX
|
|
PC7 ------> USART6_RX
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_6 | GPIO_PIN_7);
|
|
}
|
|
}
|
|
|
|
int hw_usart_init(void)
|
|
{
|
|
struct drv_uart *uart;
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
#ifdef RT_USING_UART1
|
|
uart = &uart1;
|
|
uart->UartHandle.Instance = USART1;
|
|
uart->irq = USART1_IRQn;
|
|
serial1.ops = &drv_uart_ops;
|
|
serial1.config = config;
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(&serial1, "uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* RT_USING_UART1 */
|
|
#ifdef RT_USING_UART2
|
|
uart = &uart2;
|
|
uart->UartHandle.Instance = USART2;
|
|
uart->irq = USART2_IRQn;
|
|
serial2.ops = &drv_uart_ops;
|
|
serial2.config = config;
|
|
/* register UART2 device */
|
|
rt_hw_serial_register(&serial2, "uart2",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* RT_USING_UART2 */
|
|
#ifdef RT_USING_UART6
|
|
uart = &uart6;
|
|
uart->UartHandle.Instance = USART6;
|
|
uart->irq = USART6_IRQn;
|
|
serial6.ops = &drv_uart_ops;
|
|
serial6.config = config;
|
|
/* register UART2 device */
|
|
rt_hw_serial_register(&serial6, "uart6",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
uart);
|
|
#endif /* RT_USING_UART2 */
|
|
return 0;
|
|
}
|
|
INIT_BOARD_EXPORT(hw_usart_init);
|