588 lines
30 KiB
C
588 lines
30 KiB
C
//*****************************************************************************
|
|
//
|
|
// am_reg_iomstr.h
|
|
//! @file
|
|
//!
|
|
//! @brief Register macros for the IOMSTR module
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Copyright (c) 2017, Ambiq Micro
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
|
// contributors may be used to endorse or promote products derived from this
|
|
// software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 1.2.11 of the AmbiqSuite Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
#ifndef AM_REG_IOMSTR_H
|
|
#define AM_REG_IOMSTR_H
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Instance finder. (6 instance(s) available)
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_REG_IOMSTR_NUM_MODULES 6
|
|
#define AM_REG_IOMSTRn(n) \
|
|
(REG_IOMSTR_BASEADDR + 0x00001000 * n)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Register offsets.
|
|
//
|
|
//*****************************************************************************
|
|
#define AM_REG_IOMSTR_FIFO_O 0x00000000
|
|
#define AM_REG_IOMSTR_FIFOPTR_O 0x00000100
|
|
#define AM_REG_IOMSTR_TLNGTH_O 0x00000104
|
|
#define AM_REG_IOMSTR_FIFOTHR_O 0x00000108
|
|
#define AM_REG_IOMSTR_CLKCFG_O 0x0000010C
|
|
#define AM_REG_IOMSTR_CMD_O 0x00000110
|
|
#define AM_REG_IOMSTR_CMDRPT_O 0x00000114
|
|
#define AM_REG_IOMSTR_STATUS_O 0x00000118
|
|
#define AM_REG_IOMSTR_CFG_O 0x0000011C
|
|
#define AM_REG_IOMSTR_INTEN_O 0x00000200
|
|
#define AM_REG_IOMSTR_INTSTAT_O 0x00000204
|
|
#define AM_REG_IOMSTR_INTCLR_O 0x00000208
|
|
#define AM_REG_IOMSTR_INTSET_O 0x0000020C
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_INTEN - IO Master Interrupts: Enable
|
|
//
|
|
//*****************************************************************************
|
|
// This is the arbitration loss interrupt. This error occurs if another master
|
|
// collides with an IO Master transfer. Generally, the IOM started an operation
|
|
// but found SDA already low.
|
|
#define AM_REG_IOMSTR_INTEN_ARB_S 10
|
|
#define AM_REG_IOMSTR_INTEN_ARB_M 0x00000400
|
|
#define AM_REG_IOMSTR_INTEN_ARB(n) (((uint32_t)(n) << 10) & 0x00000400)
|
|
|
|
// This is the STOP command interrupt. A STOP bit was detected by the IOM.
|
|
#define AM_REG_IOMSTR_INTEN_STOP_S 9
|
|
#define AM_REG_IOMSTR_INTEN_STOP_M 0x00000200
|
|
#define AM_REG_IOMSTR_INTEN_STOP(n) (((uint32_t)(n) << 9) & 0x00000200)
|
|
|
|
// This is the START command interrupt. A START from another master was
|
|
// detected. Software must wait for a STOP before proceeding.
|
|
#define AM_REG_IOMSTR_INTEN_START_S 8
|
|
#define AM_REG_IOMSTR_INTEN_START_M 0x00000100
|
|
#define AM_REG_IOMSTR_INTEN_START(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
|
|
// This is the illegal command interrupt. Software attempted to issue a CMD
|
|
// while another CMD was already in progress. Or an attempt was made to issue a
|
|
// non-zero-length write CMD with an empty FIFO.
|
|
#define AM_REG_IOMSTR_INTEN_ICMD_S 7
|
|
#define AM_REG_IOMSTR_INTEN_ICMD_M 0x00000080
|
|
#define AM_REG_IOMSTR_INTEN_ICMD(n) (((uint32_t)(n) << 7) & 0x00000080)
|
|
|
|
// This is the illegal FIFO access interrupt. An attempt was made to read the
|
|
// FIFO during a write CMD. Or an attempt was made to write the FIFO on a read
|
|
// CMD.
|
|
#define AM_REG_IOMSTR_INTEN_IACC_S 6
|
|
#define AM_REG_IOMSTR_INTEN_IACC_M 0x00000040
|
|
#define AM_REG_IOMSTR_INTEN_IACC(n) (((uint32_t)(n) << 6) & 0x00000040)
|
|
|
|
// This is the WTLEN interrupt.
|
|
#define AM_REG_IOMSTR_INTEN_WTLEN_S 5
|
|
#define AM_REG_IOMSTR_INTEN_WTLEN_M 0x00000020
|
|
#define AM_REG_IOMSTR_INTEN_WTLEN(n) (((uint32_t)(n) << 5) & 0x00000020)
|
|
|
|
// This is the I2C NAK interrupt. The expected ACK from the slave was not
|
|
// received by the IOM.
|
|
#define AM_REG_IOMSTR_INTEN_NAK_S 4
|
|
#define AM_REG_IOMSTR_INTEN_NAK_M 0x00000010
|
|
#define AM_REG_IOMSTR_INTEN_NAK(n) (((uint32_t)(n) << 4) & 0x00000010)
|
|
|
|
// This is the Write FIFO Overflow interrupt. An attempt was made to write the
|
|
// FIFO while it was full (i.e. while FIFOSIZ > 124).
|
|
#define AM_REG_IOMSTR_INTEN_FOVFL_S 3
|
|
#define AM_REG_IOMSTR_INTEN_FOVFL_M 0x00000008
|
|
#define AM_REG_IOMSTR_INTEN_FOVFL(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
|
|
// This is the Read FIFO Underflow interrupt. An attempt was made to read FIFO
|
|
// when empty (i.e. while FIFOSIZ less than 4).
|
|
#define AM_REG_IOMSTR_INTEN_FUNDFL_S 2
|
|
#define AM_REG_IOMSTR_INTEN_FUNDFL_M 0x00000004
|
|
#define AM_REG_IOMSTR_INTEN_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
|
|
// This is the FIFO Threshold interrupt.
|
|
#define AM_REG_IOMSTR_INTEN_THR_S 1
|
|
#define AM_REG_IOMSTR_INTEN_THR_M 0x00000002
|
|
#define AM_REG_IOMSTR_INTEN_THR(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
|
|
// This is the Command Complete interrupt.
|
|
#define AM_REG_IOMSTR_INTEN_CMDCMP_S 0
|
|
#define AM_REG_IOMSTR_INTEN_CMDCMP_M 0x00000001
|
|
#define AM_REG_IOMSTR_INTEN_CMDCMP(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_INTSTAT - IO Master Interrupts: Status
|
|
//
|
|
//*****************************************************************************
|
|
// This is the arbitration loss interrupt. This error occurs if another master
|
|
// collides with an IO Master transfer. Generally, the IOM started an operation
|
|
// but found SDA already low.
|
|
#define AM_REG_IOMSTR_INTSTAT_ARB_S 10
|
|
#define AM_REG_IOMSTR_INTSTAT_ARB_M 0x00000400
|
|
#define AM_REG_IOMSTR_INTSTAT_ARB(n) (((uint32_t)(n) << 10) & 0x00000400)
|
|
|
|
// This is the STOP command interrupt. A STOP bit was detected by the IOM.
|
|
#define AM_REG_IOMSTR_INTSTAT_STOP_S 9
|
|
#define AM_REG_IOMSTR_INTSTAT_STOP_M 0x00000200
|
|
#define AM_REG_IOMSTR_INTSTAT_STOP(n) (((uint32_t)(n) << 9) & 0x00000200)
|
|
|
|
// This is the START command interrupt. A START from another master was
|
|
// detected. Software must wait for a STOP before proceeding.
|
|
#define AM_REG_IOMSTR_INTSTAT_START_S 8
|
|
#define AM_REG_IOMSTR_INTSTAT_START_M 0x00000100
|
|
#define AM_REG_IOMSTR_INTSTAT_START(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
|
|
// This is the illegal command interrupt. Software attempted to issue a CMD
|
|
// while another CMD was already in progress. Or an attempt was made to issue a
|
|
// non-zero-length write CMD with an empty FIFO.
|
|
#define AM_REG_IOMSTR_INTSTAT_ICMD_S 7
|
|
#define AM_REG_IOMSTR_INTSTAT_ICMD_M 0x00000080
|
|
#define AM_REG_IOMSTR_INTSTAT_ICMD(n) (((uint32_t)(n) << 7) & 0x00000080)
|
|
|
|
// This is the illegal FIFO access interrupt. An attempt was made to read the
|
|
// FIFO during a write CMD. Or an attempt was made to write the FIFO on a read
|
|
// CMD.
|
|
#define AM_REG_IOMSTR_INTSTAT_IACC_S 6
|
|
#define AM_REG_IOMSTR_INTSTAT_IACC_M 0x00000040
|
|
#define AM_REG_IOMSTR_INTSTAT_IACC(n) (((uint32_t)(n) << 6) & 0x00000040)
|
|
|
|
// This is the WTLEN interrupt.
|
|
#define AM_REG_IOMSTR_INTSTAT_WTLEN_S 5
|
|
#define AM_REG_IOMSTR_INTSTAT_WTLEN_M 0x00000020
|
|
#define AM_REG_IOMSTR_INTSTAT_WTLEN(n) (((uint32_t)(n) << 5) & 0x00000020)
|
|
|
|
// This is the I2C NAK interrupt. The expected ACK from the slave was not
|
|
// received by the IOM.
|
|
#define AM_REG_IOMSTR_INTSTAT_NAK_S 4
|
|
#define AM_REG_IOMSTR_INTSTAT_NAK_M 0x00000010
|
|
#define AM_REG_IOMSTR_INTSTAT_NAK(n) (((uint32_t)(n) << 4) & 0x00000010)
|
|
|
|
// This is the Write FIFO Overflow interrupt. An attempt was made to write the
|
|
// FIFO while it was full (i.e. while FIFOSIZ > 124).
|
|
#define AM_REG_IOMSTR_INTSTAT_FOVFL_S 3
|
|
#define AM_REG_IOMSTR_INTSTAT_FOVFL_M 0x00000008
|
|
#define AM_REG_IOMSTR_INTSTAT_FOVFL(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
|
|
// This is the Read FIFO Underflow interrupt. An attempt was made to read FIFO
|
|
// when empty (i.e. while FIFOSIZ less than 4).
|
|
#define AM_REG_IOMSTR_INTSTAT_FUNDFL_S 2
|
|
#define AM_REG_IOMSTR_INTSTAT_FUNDFL_M 0x00000004
|
|
#define AM_REG_IOMSTR_INTSTAT_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
|
|
// This is the FIFO Threshold interrupt.
|
|
#define AM_REG_IOMSTR_INTSTAT_THR_S 1
|
|
#define AM_REG_IOMSTR_INTSTAT_THR_M 0x00000002
|
|
#define AM_REG_IOMSTR_INTSTAT_THR(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
|
|
// This is the Command Complete interrupt.
|
|
#define AM_REG_IOMSTR_INTSTAT_CMDCMP_S 0
|
|
#define AM_REG_IOMSTR_INTSTAT_CMDCMP_M 0x00000001
|
|
#define AM_REG_IOMSTR_INTSTAT_CMDCMP(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_INTCLR - IO Master Interrupts: Clear
|
|
//
|
|
//*****************************************************************************
|
|
// This is the arbitration loss interrupt. This error occurs if another master
|
|
// collides with an IO Master transfer. Generally, the IOM started an operation
|
|
// but found SDA already low.
|
|
#define AM_REG_IOMSTR_INTCLR_ARB_S 10
|
|
#define AM_REG_IOMSTR_INTCLR_ARB_M 0x00000400
|
|
#define AM_REG_IOMSTR_INTCLR_ARB(n) (((uint32_t)(n) << 10) & 0x00000400)
|
|
|
|
// This is the STOP command interrupt. A STOP bit was detected by the IOM.
|
|
#define AM_REG_IOMSTR_INTCLR_STOP_S 9
|
|
#define AM_REG_IOMSTR_INTCLR_STOP_M 0x00000200
|
|
#define AM_REG_IOMSTR_INTCLR_STOP(n) (((uint32_t)(n) << 9) & 0x00000200)
|
|
|
|
// This is the START command interrupt. A START from another master was
|
|
// detected. Software must wait for a STOP before proceeding.
|
|
#define AM_REG_IOMSTR_INTCLR_START_S 8
|
|
#define AM_REG_IOMSTR_INTCLR_START_M 0x00000100
|
|
#define AM_REG_IOMSTR_INTCLR_START(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
|
|
// This is the illegal command interrupt. Software attempted to issue a CMD
|
|
// while another CMD was already in progress. Or an attempt was made to issue a
|
|
// non-zero-length write CMD with an empty FIFO.
|
|
#define AM_REG_IOMSTR_INTCLR_ICMD_S 7
|
|
#define AM_REG_IOMSTR_INTCLR_ICMD_M 0x00000080
|
|
#define AM_REG_IOMSTR_INTCLR_ICMD(n) (((uint32_t)(n) << 7) & 0x00000080)
|
|
|
|
// This is the illegal FIFO access interrupt. An attempt was made to read the
|
|
// FIFO during a write CMD. Or an attempt was made to write the FIFO on a read
|
|
// CMD.
|
|
#define AM_REG_IOMSTR_INTCLR_IACC_S 6
|
|
#define AM_REG_IOMSTR_INTCLR_IACC_M 0x00000040
|
|
#define AM_REG_IOMSTR_INTCLR_IACC(n) (((uint32_t)(n) << 6) & 0x00000040)
|
|
|
|
// This is the WTLEN interrupt.
|
|
#define AM_REG_IOMSTR_INTCLR_WTLEN_S 5
|
|
#define AM_REG_IOMSTR_INTCLR_WTLEN_M 0x00000020
|
|
#define AM_REG_IOMSTR_INTCLR_WTLEN(n) (((uint32_t)(n) << 5) & 0x00000020)
|
|
|
|
// This is the I2C NAK interrupt. The expected ACK from the slave was not
|
|
// received by the IOM.
|
|
#define AM_REG_IOMSTR_INTCLR_NAK_S 4
|
|
#define AM_REG_IOMSTR_INTCLR_NAK_M 0x00000010
|
|
#define AM_REG_IOMSTR_INTCLR_NAK(n) (((uint32_t)(n) << 4) & 0x00000010)
|
|
|
|
// This is the Write FIFO Overflow interrupt. An attempt was made to write the
|
|
// FIFO while it was full (i.e. while FIFOSIZ > 124).
|
|
#define AM_REG_IOMSTR_INTCLR_FOVFL_S 3
|
|
#define AM_REG_IOMSTR_INTCLR_FOVFL_M 0x00000008
|
|
#define AM_REG_IOMSTR_INTCLR_FOVFL(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
|
|
// This is the Read FIFO Underflow interrupt. An attempt was made to read FIFO
|
|
// when empty (i.e. while FIFOSIZ less than 4).
|
|
#define AM_REG_IOMSTR_INTCLR_FUNDFL_S 2
|
|
#define AM_REG_IOMSTR_INTCLR_FUNDFL_M 0x00000004
|
|
#define AM_REG_IOMSTR_INTCLR_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
|
|
// This is the FIFO Threshold interrupt.
|
|
#define AM_REG_IOMSTR_INTCLR_THR_S 1
|
|
#define AM_REG_IOMSTR_INTCLR_THR_M 0x00000002
|
|
#define AM_REG_IOMSTR_INTCLR_THR(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
|
|
// This is the Command Complete interrupt.
|
|
#define AM_REG_IOMSTR_INTCLR_CMDCMP_S 0
|
|
#define AM_REG_IOMSTR_INTCLR_CMDCMP_M 0x00000001
|
|
#define AM_REG_IOMSTR_INTCLR_CMDCMP(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_INTSET - IO Master Interrupts: Set
|
|
//
|
|
//*****************************************************************************
|
|
// This is the arbitration loss interrupt. This error occurs if another master
|
|
// collides with an IO Master transfer. Generally, the IOM started an operation
|
|
// but found SDA already low.
|
|
#define AM_REG_IOMSTR_INTSET_ARB_S 10
|
|
#define AM_REG_IOMSTR_INTSET_ARB_M 0x00000400
|
|
#define AM_REG_IOMSTR_INTSET_ARB(n) (((uint32_t)(n) << 10) & 0x00000400)
|
|
|
|
// This is the STOP command interrupt. A STOP bit was detected by the IOM.
|
|
#define AM_REG_IOMSTR_INTSET_STOP_S 9
|
|
#define AM_REG_IOMSTR_INTSET_STOP_M 0x00000200
|
|
#define AM_REG_IOMSTR_INTSET_STOP(n) (((uint32_t)(n) << 9) & 0x00000200)
|
|
|
|
// This is the START command interrupt. A START from another master was
|
|
// detected. Software must wait for a STOP before proceeding.
|
|
#define AM_REG_IOMSTR_INTSET_START_S 8
|
|
#define AM_REG_IOMSTR_INTSET_START_M 0x00000100
|
|
#define AM_REG_IOMSTR_INTSET_START(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
|
|
// This is the illegal command interrupt. Software attempted to issue a CMD
|
|
// while another CMD was already in progress. Or an attempt was made to issue a
|
|
// non-zero-length write CMD with an empty FIFO.
|
|
#define AM_REG_IOMSTR_INTSET_ICMD_S 7
|
|
#define AM_REG_IOMSTR_INTSET_ICMD_M 0x00000080
|
|
#define AM_REG_IOMSTR_INTSET_ICMD(n) (((uint32_t)(n) << 7) & 0x00000080)
|
|
|
|
// This is the illegal FIFO access interrupt. An attempt was made to read the
|
|
// FIFO during a write CMD. Or an attempt was made to write the FIFO on a read
|
|
// CMD.
|
|
#define AM_REG_IOMSTR_INTSET_IACC_S 6
|
|
#define AM_REG_IOMSTR_INTSET_IACC_M 0x00000040
|
|
#define AM_REG_IOMSTR_INTSET_IACC(n) (((uint32_t)(n) << 6) & 0x00000040)
|
|
|
|
// This is the WTLEN interrupt.
|
|
#define AM_REG_IOMSTR_INTSET_WTLEN_S 5
|
|
#define AM_REG_IOMSTR_INTSET_WTLEN_M 0x00000020
|
|
#define AM_REG_IOMSTR_INTSET_WTLEN(n) (((uint32_t)(n) << 5) & 0x00000020)
|
|
|
|
// This is the I2C NAK interrupt. The expected ACK from the slave was not
|
|
// received by the IOM.
|
|
#define AM_REG_IOMSTR_INTSET_NAK_S 4
|
|
#define AM_REG_IOMSTR_INTSET_NAK_M 0x00000010
|
|
#define AM_REG_IOMSTR_INTSET_NAK(n) (((uint32_t)(n) << 4) & 0x00000010)
|
|
|
|
// This is the Write FIFO Overflow interrupt. An attempt was made to write the
|
|
// FIFO while it was full (i.e. while FIFOSIZ > 124).
|
|
#define AM_REG_IOMSTR_INTSET_FOVFL_S 3
|
|
#define AM_REG_IOMSTR_INTSET_FOVFL_M 0x00000008
|
|
#define AM_REG_IOMSTR_INTSET_FOVFL(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
|
|
// This is the Read FIFO Underflow interrupt. An attempt was made to read FIFO
|
|
// when empty (i.e. while FIFOSIZ less than 4).
|
|
#define AM_REG_IOMSTR_INTSET_FUNDFL_S 2
|
|
#define AM_REG_IOMSTR_INTSET_FUNDFL_M 0x00000004
|
|
#define AM_REG_IOMSTR_INTSET_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
|
|
// This is the FIFO Threshold interrupt.
|
|
#define AM_REG_IOMSTR_INTSET_THR_S 1
|
|
#define AM_REG_IOMSTR_INTSET_THR_M 0x00000002
|
|
#define AM_REG_IOMSTR_INTSET_THR(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
|
|
// This is the Command Complete interrupt.
|
|
#define AM_REG_IOMSTR_INTSET_CMDCMP_S 0
|
|
#define AM_REG_IOMSTR_INTSET_CMDCMP_M 0x00000001
|
|
#define AM_REG_IOMSTR_INTSET_CMDCMP(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_FIFO - FIFO Access Port
|
|
//
|
|
//*****************************************************************************
|
|
// FIFO access port.
|
|
#define AM_REG_IOMSTR_FIFO_FIFO_S 0
|
|
#define AM_REG_IOMSTR_FIFO_FIFO_M 0xFFFFFFFF
|
|
#define AM_REG_IOMSTR_FIFO_FIFO(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_FIFOPTR - Current FIFO Pointers
|
|
//
|
|
//*****************************************************************************
|
|
// The number of bytes remaining in the FIFO (i.e. 128-FIFOSIZ if FULLDUP = 0 or
|
|
// 64-FIFOSIZ if FULLDUP = 1)).
|
|
#define AM_REG_IOMSTR_FIFOPTR_FIFOREM_S 16
|
|
#define AM_REG_IOMSTR_FIFOPTR_FIFOREM_M 0x00FF0000
|
|
#define AM_REG_IOMSTR_FIFOPTR_FIFOREM(n) (((uint32_t)(n) << 16) & 0x00FF0000)
|
|
|
|
// The number of bytes currently in the FIFO.
|
|
#define AM_REG_IOMSTR_FIFOPTR_FIFOSIZ_S 0
|
|
#define AM_REG_IOMSTR_FIFOPTR_FIFOSIZ_M 0x000000FF
|
|
#define AM_REG_IOMSTR_FIFOPTR_FIFOSIZ(n) (((uint32_t)(n) << 0) & 0x000000FF)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_TLNGTH - Transfer Length
|
|
//
|
|
//*****************************************************************************
|
|
// Remaining transfer length.
|
|
#define AM_REG_IOMSTR_TLNGTH_TLNGTH_S 0
|
|
#define AM_REG_IOMSTR_TLNGTH_TLNGTH_M 0x00000FFF
|
|
#define AM_REG_IOMSTR_TLNGTH_TLNGTH(n) (((uint32_t)(n) << 0) & 0x00000FFF)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_FIFOTHR - FIFO Threshold Configuration
|
|
//
|
|
//*****************************************************************************
|
|
// FIFO write threshold.
|
|
#define AM_REG_IOMSTR_FIFOTHR_FIFOWTHR_S 8
|
|
#define AM_REG_IOMSTR_FIFOTHR_FIFOWTHR_M 0x00007F00
|
|
#define AM_REG_IOMSTR_FIFOTHR_FIFOWTHR(n) (((uint32_t)(n) << 8) & 0x00007F00)
|
|
|
|
// FIFO read threshold.
|
|
#define AM_REG_IOMSTR_FIFOTHR_FIFORTHR_S 0
|
|
#define AM_REG_IOMSTR_FIFOTHR_FIFORTHR_M 0x0000007F
|
|
#define AM_REG_IOMSTR_FIFOTHR_FIFORTHR(n) (((uint32_t)(n) << 0) & 0x0000007F)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_CLKCFG - I/O Clock Configuration
|
|
//
|
|
//*****************************************************************************
|
|
// Clock total count minus 1.
|
|
#define AM_REG_IOMSTR_CLKCFG_TOTPER_S 24
|
|
#define AM_REG_IOMSTR_CLKCFG_TOTPER_M 0xFF000000
|
|
#define AM_REG_IOMSTR_CLKCFG_TOTPER(n) (((uint32_t)(n) << 24) & 0xFF000000)
|
|
|
|
// Clock low count minus 1.
|
|
#define AM_REG_IOMSTR_CLKCFG_LOWPER_S 16
|
|
#define AM_REG_IOMSTR_CLKCFG_LOWPER_M 0x00FF0000
|
|
#define AM_REG_IOMSTR_CLKCFG_LOWPER(n) (((uint32_t)(n) << 16) & 0x00FF0000)
|
|
|
|
// Enable clock division by TOTPER.
|
|
#define AM_REG_IOMSTR_CLKCFG_DIVEN_S 12
|
|
#define AM_REG_IOMSTR_CLKCFG_DIVEN_M 0x00001000
|
|
#define AM_REG_IOMSTR_CLKCFG_DIVEN(n) (((uint32_t)(n) << 12) & 0x00001000)
|
|
#define AM_REG_IOMSTR_CLKCFG_DIVEN_DIS 0x00000000
|
|
#define AM_REG_IOMSTR_CLKCFG_DIVEN_EN 0x00001000
|
|
|
|
// Enable divide by 3.
|
|
#define AM_REG_IOMSTR_CLKCFG_DIV3_S 11
|
|
#define AM_REG_IOMSTR_CLKCFG_DIV3_M 0x00000800
|
|
#define AM_REG_IOMSTR_CLKCFG_DIV3(n) (((uint32_t)(n) << 11) & 0x00000800)
|
|
#define AM_REG_IOMSTR_CLKCFG_DIV3_DIS 0x00000000
|
|
#define AM_REG_IOMSTR_CLKCFG_DIV3_EN 0x00000800
|
|
|
|
// Select the input clock frequency.
|
|
#define AM_REG_IOMSTR_CLKCFG_FSEL_S 8
|
|
#define AM_REG_IOMSTR_CLKCFG_FSEL_M 0x00000700
|
|
#define AM_REG_IOMSTR_CLKCFG_FSEL(n) (((uint32_t)(n) << 8) & 0x00000700)
|
|
#define AM_REG_IOMSTR_CLKCFG_FSEL_MIN_PWR 0x00000000
|
|
#define AM_REG_IOMSTR_CLKCFG_FSEL_HFRC 0x00000100
|
|
#define AM_REG_IOMSTR_CLKCFG_FSEL_HFRC_DIV2 0x00000200
|
|
#define AM_REG_IOMSTR_CLKCFG_FSEL_HFRC_DIV4 0x00000300
|
|
#define AM_REG_IOMSTR_CLKCFG_FSEL_HFRC_DIV8 0x00000400
|
|
#define AM_REG_IOMSTR_CLKCFG_FSEL_HFRC_DIV16 0x00000500
|
|
#define AM_REG_IOMSTR_CLKCFG_FSEL_HFRC_DIV32 0x00000600
|
|
#define AM_REG_IOMSTR_CLKCFG_FSEL_HFRC_DIV64 0x00000700
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_CMD - Command Register
|
|
//
|
|
//*****************************************************************************
|
|
// This register holds the I/O Command
|
|
#define AM_REG_IOMSTR_CMD_CMD_S 0
|
|
#define AM_REG_IOMSTR_CMD_CMD_M 0xFFFFFFFF
|
|
#define AM_REG_IOMSTR_CMD_CMD(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_CMDRPT - Command Repeat Register
|
|
//
|
|
//*****************************************************************************
|
|
// These bits hold the Command repeat count.
|
|
#define AM_REG_IOMSTR_CMDRPT_CMDRPT_S 0
|
|
#define AM_REG_IOMSTR_CMDRPT_CMDRPT_M 0x0000001F
|
|
#define AM_REG_IOMSTR_CMDRPT_CMDRPT(n) (((uint32_t)(n) << 0) & 0x0000001F)
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_STATUS - Status Register
|
|
//
|
|
//*****************************************************************************
|
|
// This bit indicates if the I/O state machine is IDLE.
|
|
#define AM_REG_IOMSTR_STATUS_IDLEST_S 2
|
|
#define AM_REG_IOMSTR_STATUS_IDLEST_M 0x00000004
|
|
#define AM_REG_IOMSTR_STATUS_IDLEST(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
#define AM_REG_IOMSTR_STATUS_IDLEST_IDLE 0x00000004
|
|
|
|
// This bit indicates if the I/O Command is active.
|
|
#define AM_REG_IOMSTR_STATUS_CMDACT_S 1
|
|
#define AM_REG_IOMSTR_STATUS_CMDACT_M 0x00000002
|
|
#define AM_REG_IOMSTR_STATUS_CMDACT(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
#define AM_REG_IOMSTR_STATUS_CMDACT_ACTIVE 0x00000002
|
|
|
|
// This bit indicates if an error interrupt has occurred.
|
|
#define AM_REG_IOMSTR_STATUS_ERR_S 0
|
|
#define AM_REG_IOMSTR_STATUS_ERR_M 0x00000001
|
|
#define AM_REG_IOMSTR_STATUS_ERR(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
#define AM_REG_IOMSTR_STATUS_ERR_ERROR 0x00000001
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// IOMSTR_CFG - I/O Master Configuration
|
|
//
|
|
//*****************************************************************************
|
|
// This bit enables the IO Master.
|
|
#define AM_REG_IOMSTR_CFG_IFCEN_S 31
|
|
#define AM_REG_IOMSTR_CFG_IFCEN_M 0x80000000
|
|
#define AM_REG_IOMSTR_CFG_IFCEN(n) (((uint32_t)(n) << 31) & 0x80000000)
|
|
#define AM_REG_IOMSTR_CFG_IFCEN_DIS 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_IFCEN_EN 0x80000000
|
|
|
|
// This bit selects the read flow control signal polarity.
|
|
#define AM_REG_IOMSTR_CFG_RDFCPOL_S 14
|
|
#define AM_REG_IOMSTR_CFG_RDFCPOL_M 0x00004000
|
|
#define AM_REG_IOMSTR_CFG_RDFCPOL(n) (((uint32_t)(n) << 14) & 0x00004000)
|
|
#define AM_REG_IOMSTR_CFG_RDFCPOL_HIGH 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_RDFCPOL_LOW 0x00004000
|
|
|
|
// This bit selects the write flow control signal polarity.
|
|
#define AM_REG_IOMSTR_CFG_WTFCPOL_S 13
|
|
#define AM_REG_IOMSTR_CFG_WTFCPOL_M 0x00002000
|
|
#define AM_REG_IOMSTR_CFG_WTFCPOL(n) (((uint32_t)(n) << 13) & 0x00002000)
|
|
#define AM_REG_IOMSTR_CFG_WTFCPOL_HIGH 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_WTFCPOL_LOW 0x00002000
|
|
|
|
// This bit selects the write mode flow control signal.
|
|
#define AM_REG_IOMSTR_CFG_WTFCIRQ_S 12
|
|
#define AM_REG_IOMSTR_CFG_WTFCIRQ_M 0x00001000
|
|
#define AM_REG_IOMSTR_CFG_WTFCIRQ(n) (((uint32_t)(n) << 12) & 0x00001000)
|
|
#define AM_REG_IOMSTR_CFG_WTFCIRQ_MISO 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_WTFCIRQ_IRQ 0x00001000
|
|
|
|
// This bit must be left at the default value of 0.
|
|
#define AM_REG_IOMSTR_CFG_FCDEL_S 11
|
|
#define AM_REG_IOMSTR_CFG_FCDEL_M 0x00000800
|
|
#define AM_REG_IOMSTR_CFG_FCDEL(n) (((uint32_t)(n) << 11) & 0x00000800)
|
|
|
|
// This bit invewrts MOSI when flow control is enabled.
|
|
#define AM_REG_IOMSTR_CFG_MOSIINV_S 10
|
|
#define AM_REG_IOMSTR_CFG_MOSIINV_M 0x00000400
|
|
#define AM_REG_IOMSTR_CFG_MOSIINV(n) (((uint32_t)(n) << 10) & 0x00000400)
|
|
#define AM_REG_IOMSTR_CFG_MOSIINV_NORMAL 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_MOSIINV_INVERT 0x00000400
|
|
|
|
// This bit enables read mode flow control.
|
|
#define AM_REG_IOMSTR_CFG_RDFC_S 9
|
|
#define AM_REG_IOMSTR_CFG_RDFC_M 0x00000200
|
|
#define AM_REG_IOMSTR_CFG_RDFC(n) (((uint32_t)(n) << 9) & 0x00000200)
|
|
#define AM_REG_IOMSTR_CFG_RDFC_DIS 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_RDFC_EN 0x00000200
|
|
|
|
// This bit enables write mode flow control.
|
|
#define AM_REG_IOMSTR_CFG_WTFC_S 8
|
|
#define AM_REG_IOMSTR_CFG_WTFC_M 0x00000100
|
|
#define AM_REG_IOMSTR_CFG_WTFC(n) (((uint32_t)(n) << 8) & 0x00000100)
|
|
#define AM_REG_IOMSTR_CFG_WTFC_DIS 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_WTFC_EN 0x00000100
|
|
|
|
// This bit selects the preread timing.
|
|
#define AM_REG_IOMSTR_CFG_STARTRD_S 4
|
|
#define AM_REG_IOMSTR_CFG_STARTRD_M 0x00000030
|
|
#define AM_REG_IOMSTR_CFG_STARTRD(n) (((uint32_t)(n) << 4) & 0x00000030)
|
|
#define AM_REG_IOMSTR_CFG_STARTRD_PRERD0 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_STARTRD_PRERD1 0x00000010
|
|
#define AM_REG_IOMSTR_CFG_STARTRD_PRERD2 0x00000020
|
|
#define AM_REG_IOMSTR_CFG_STARTRD_PRERD3 0x00000030
|
|
|
|
// This bit selects full duplex mode.
|
|
#define AM_REG_IOMSTR_CFG_FULLDUP_S 3
|
|
#define AM_REG_IOMSTR_CFG_FULLDUP_M 0x00000008
|
|
#define AM_REG_IOMSTR_CFG_FULLDUP(n) (((uint32_t)(n) << 3) & 0x00000008)
|
|
#define AM_REG_IOMSTR_CFG_FULLDUP_NORMAL 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_FULLDUP_FULLDUP 0x00000008
|
|
|
|
// This bit selects SPI phase.
|
|
#define AM_REG_IOMSTR_CFG_SPHA_S 2
|
|
#define AM_REG_IOMSTR_CFG_SPHA_M 0x00000004
|
|
#define AM_REG_IOMSTR_CFG_SPHA(n) (((uint32_t)(n) << 2) & 0x00000004)
|
|
#define AM_REG_IOMSTR_CFG_SPHA_SAMPLE_LEADING_EDGE 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_SPHA_SAMPLE_TRAILING_EDGE 0x00000004
|
|
|
|
// This bit selects SPI polarity.
|
|
#define AM_REG_IOMSTR_CFG_SPOL_S 1
|
|
#define AM_REG_IOMSTR_CFG_SPOL_M 0x00000002
|
|
#define AM_REG_IOMSTR_CFG_SPOL(n) (((uint32_t)(n) << 1) & 0x00000002)
|
|
#define AM_REG_IOMSTR_CFG_SPOL_CLK_BASE_0 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_SPOL_CLK_BASE_1 0x00000002
|
|
|
|
// This bit selects the I/O interface.
|
|
#define AM_REG_IOMSTR_CFG_IFCSEL_S 0
|
|
#define AM_REG_IOMSTR_CFG_IFCSEL_M 0x00000001
|
|
#define AM_REG_IOMSTR_CFG_IFCSEL(n) (((uint32_t)(n) << 0) & 0x00000001)
|
|
#define AM_REG_IOMSTR_CFG_IFCSEL_I2C 0x00000000
|
|
#define AM_REG_IOMSTR_CFG_IFCSEL_SPI 0x00000001
|
|
|
|
#endif // AM_REG_IOMSTR_H
|