356 lines
9.2 KiB
C
356 lines
9.2 KiB
C
/**************************************************************************//**
|
|
*
|
|
* @copyright (C) 2019 Nuvoton Technology Corp. All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2020-1-16 Wayne First version
|
|
*
|
|
******************************************************************************/
|
|
|
|
#include <rtdevice.h>
|
|
#include <drv_gpio.h>
|
|
|
|
#if defined(BOARD_USING_STORAGE_SPIFLASH)
|
|
#if defined(RT_USING_SFUD)
|
|
#include "dev_spi_flash.h"
|
|
#include "dev_spi_flash_sfud.h"
|
|
#endif
|
|
|
|
#include "drv_qspi.h"
|
|
|
|
#define W25X_REG_READSTATUS (0x05)
|
|
#define W25X_REG_READSTATUS2 (0x35)
|
|
#define W25X_REG_WRITEENABLE (0x06)
|
|
#define W25X_REG_WRITESTATUS (0x01)
|
|
#define W25X_REG_QUADENABLE (0x02)
|
|
|
|
static rt_uint8_t SpiFlash_ReadStatusReg(struct rt_qspi_device *qspi_device)
|
|
{
|
|
rt_uint8_t u8Val;
|
|
rt_err_t result = RT_EOK;
|
|
rt_uint8_t w25x_txCMD1 = W25X_REG_READSTATUS;
|
|
|
|
result = rt_qspi_send_then_recv(qspi_device, &w25x_txCMD1, 1, &u8Val, 1);
|
|
RT_ASSERT(result > 0);
|
|
|
|
return u8Val;
|
|
}
|
|
|
|
static rt_uint8_t SpiFlash_ReadStatusReg2(struct rt_qspi_device *qspi_device)
|
|
{
|
|
rt_uint8_t u8Val;
|
|
rt_err_t result = RT_EOK;
|
|
rt_uint8_t w25x_txCMD1 = W25X_REG_READSTATUS2;
|
|
|
|
result = rt_qspi_send_then_recv(qspi_device, &w25x_txCMD1, 1, &u8Val, 1);
|
|
RT_ASSERT(result > 0);
|
|
|
|
return u8Val;
|
|
}
|
|
|
|
static rt_err_t SpiFlash_WriteStatusReg(struct rt_qspi_device *qspi_device, uint8_t u8Value1, uint8_t u8Value2)
|
|
{
|
|
rt_uint8_t w25x_txCMD1;
|
|
rt_uint8_t au8Val[2];
|
|
rt_err_t result;
|
|
struct rt_qspi_message qspi_message = {0};
|
|
|
|
/* Enable WE */
|
|
w25x_txCMD1 = W25X_REG_WRITEENABLE;
|
|
result = rt_qspi_send(qspi_device, &w25x_txCMD1, sizeof(w25x_txCMD1));
|
|
if (result != sizeof(w25x_txCMD1))
|
|
goto exit_SpiFlash_WriteStatusReg;
|
|
|
|
/* Prepare status-1, 2 data */
|
|
au8Val[0] = u8Value1;
|
|
au8Val[1] = u8Value2;
|
|
|
|
/* 1-bit mode: Instruction+payload */
|
|
qspi_message.instruction.content = W25X_REG_WRITESTATUS;
|
|
qspi_message.instruction.qspi_lines = 1;
|
|
|
|
qspi_message.qspi_data_lines = 1;
|
|
qspi_message.parent.cs_take = 1;
|
|
qspi_message.parent.cs_release = 1;
|
|
qspi_message.parent.send_buf = &au8Val[0];
|
|
qspi_message.parent.length = sizeof(au8Val);
|
|
qspi_message.parent.next = RT_NULL;
|
|
|
|
if (rt_qspi_transfer_message(qspi_device, &qspi_message) != sizeof(au8Val))
|
|
{
|
|
result = -RT_ERROR;
|
|
}
|
|
|
|
result = RT_EOK;
|
|
|
|
exit_SpiFlash_WriteStatusReg:
|
|
|
|
return result;
|
|
}
|
|
|
|
static void SpiFlash_WaitReady(struct rt_qspi_device *qspi_device)
|
|
{
|
|
volatile uint8_t u8ReturnValue;
|
|
|
|
do
|
|
{
|
|
u8ReturnValue = SpiFlash_ReadStatusReg(qspi_device);
|
|
u8ReturnValue = u8ReturnValue & 1;
|
|
}
|
|
while (u8ReturnValue != 0); // check the BUSY bit
|
|
}
|
|
|
|
static void SpiFlash_EnterQspiMode(struct rt_qspi_device *qspi_device)
|
|
{
|
|
rt_err_t result = RT_EOK;
|
|
|
|
uint8_t u8Status1 = SpiFlash_ReadStatusReg(qspi_device);
|
|
uint8_t u8Status2 = SpiFlash_ReadStatusReg2(qspi_device);
|
|
|
|
u8Status2 |= W25X_REG_QUADENABLE;
|
|
|
|
result = SpiFlash_WriteStatusReg(qspi_device, u8Status1, u8Status2);
|
|
RT_ASSERT(result == RT_EOK);
|
|
|
|
SpiFlash_WaitReady(qspi_device);
|
|
}
|
|
|
|
static void SpiFlash_ExitQspiMode(struct rt_qspi_device *qspi_device)
|
|
{
|
|
rt_err_t result = RT_EOK;
|
|
uint8_t u8Status1 = SpiFlash_ReadStatusReg(qspi_device);
|
|
uint8_t u8Status2 = SpiFlash_ReadStatusReg2(qspi_device);
|
|
|
|
u8Status2 &= ~W25X_REG_QUADENABLE;
|
|
|
|
result = SpiFlash_WriteStatusReg(qspi_device, u8Status1, u8Status2);
|
|
RT_ASSERT(result == RT_EOK);
|
|
|
|
SpiFlash_WaitReady(qspi_device);
|
|
}
|
|
|
|
static int rt_hw_spiflash_init(void)
|
|
{
|
|
/*
|
|
Don't forget to switch SPIM pins to QSPI0 pins on NuMaker-M467HJ V1.0 board.
|
|
CS: R12-Open, R13-Close
|
|
CLK: R14-Open, R15-Close
|
|
MOSI: R16-Open, R17-Close
|
|
MISO: R18-Open, R19-Close
|
|
IO2: R20-Open, R21-Close
|
|
IO3: R22-Open, R23-Close
|
|
*/
|
|
if (nu_qspi_bus_attach_device("qspi0", "qspi01", 4, SpiFlash_EnterQspiMode, SpiFlash_ExitQspiMode) != RT_EOK)
|
|
return -1;
|
|
|
|
#if defined(RT_USING_SFUD)
|
|
if (rt_sfud_flash_probe(FAL_USING_NOR_FLASH_DEV_NAME, "qspi01") == RT_NULL)
|
|
{
|
|
return -(RT_ERROR);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
INIT_COMPONENT_EXPORT(rt_hw_spiflash_init);
|
|
#endif /* BOARD_USING_STORAGE_SPIFLASH */
|
|
|
|
#if defined(BOARD_USING_NAU8822) && defined(NU_PKG_USING_NAU8822)
|
|
#include <acodec_nau8822.h>
|
|
S_NU_NAU8822_CONFIG sCodecConfig =
|
|
{
|
|
.i2c_bus_name = "i2c2",
|
|
|
|
.i2s_bus_name = "sound0",
|
|
|
|
.pin_phonejack_en = NU_GET_PININDEX(NU_PD, 3),
|
|
|
|
.pin_phonejack_det = NU_GET_PININDEX(NU_PD, 2),
|
|
};
|
|
|
|
int rt_hw_nau8822_port(void)
|
|
{
|
|
if (nu_hw_nau8822_init(&sCodecConfig) != RT_EOK)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
INIT_COMPONENT_EXPORT(rt_hw_nau8822_port);
|
|
#endif /* BOARD_USING_NAU8822 */
|
|
|
|
#if defined(BOARD_USING_LCD_SSD1963) && defined(NU_PKG_USING_SSD1963_EBI)
|
|
#include <drv_ebi.h>
|
|
#include "NuMicro.h"
|
|
#include <lcd_ssd1963.h>
|
|
#if defined(PKG_USING_GUIENGINE)
|
|
#include <rtgui/driver.h>
|
|
#endif
|
|
int rt_hw_ssd1963_port(void)
|
|
{
|
|
rt_err_t ret = RT_EOK;
|
|
|
|
/* Open ebi BOARD_USING_SSD1963_EBI_PORT */
|
|
ret = nu_ebi_init(BOARD_USING_SSD1963_EBI_PORT, EBI_BUSWIDTH_16BIT, EBI_TIMING_FAST, EBI_OPMODE_NORMAL, EBI_CS_ACTIVE_LOW);
|
|
if (ret != RT_EOK)
|
|
return ret;
|
|
|
|
switch (BOARD_USING_SSD1963_EBI_PORT)
|
|
{
|
|
case 0:
|
|
EBI->CTL0 |= EBI_CTL_CACCESS_Msk;
|
|
EBI->TCTL0 |= (EBI_TCTL_WAHDOFF_Msk | EBI_TCTL_RAHDOFF_Msk);
|
|
break;
|
|
case 1:
|
|
EBI->CTL1 |= EBI_CTL_CACCESS_Msk;
|
|
EBI->TCTL1 |= (EBI_TCTL_WAHDOFF_Msk | EBI_TCTL_RAHDOFF_Msk);
|
|
break;
|
|
case 2:
|
|
EBI->CTL2 |= EBI_CTL_CACCESS_Msk;
|
|
EBI->TCTL2 |= (EBI_TCTL_WAHDOFF_Msk | EBI_TCTL_RAHDOFF_Msk);
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
if (rt_hw_lcd_ssd1963_ebi_init(EBI_BANK0_BASE_ADDR + BOARD_USING_SSD1963_EBI_PORT * EBI_MAX_SIZE) != RT_EOK)
|
|
return -1;
|
|
|
|
rt_hw_lcd_ssd1963_init();
|
|
|
|
#if defined(PKG_USING_GUIENGINE)
|
|
rt_device_t lcd_ssd1963;
|
|
lcd_ssd1963 = rt_device_find("lcd");
|
|
if (lcd_ssd1963)
|
|
{
|
|
rtgui_graphic_set_device(lcd_ssd1963);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
INIT_COMPONENT_EXPORT(rt_hw_ssd1963_port);
|
|
#endif /* BOARD_USING_LCD_SSD1963 */
|
|
|
|
|
|
#if defined(BOARD_USING_ILI2130) && defined(NU_PKG_USING_TPC_ILI)
|
|
#include "ili.h"
|
|
|
|
#define ILI2130_RST_PIN NU_GET_PININDEX(NU_PD, 10)
|
|
#define ILI2130_IRQ_PIN NU_GET_PININDEX(NU_PG, 6)
|
|
|
|
extern int tpc_sample(const char *name);
|
|
int rt_hw_ili2130_port(void)
|
|
{
|
|
struct rt_touch_config cfg;
|
|
rt_base_t rst_pin = ILI2130_RST_PIN;
|
|
cfg.dev_name = "i2c1";
|
|
cfg.irq_pin.pin = ILI2130_IRQ_PIN;
|
|
cfg.irq_pin.mode = PIN_MODE_INPUT_PULLUP;
|
|
cfg.user_data = &rst_pin;
|
|
|
|
rt_hw_ili_tpc_init("ili_tpc", &cfg);
|
|
return tpc_sample("ili_tpc");
|
|
|
|
}
|
|
INIT_ENV_EXPORT(rt_hw_ili2130_port);
|
|
#endif /* if defined(BOARD_USING_ILI2130) && defined(NU_PKG_USING_ILI_TPC) */
|
|
|
|
#if defined(BOARD_USING_LCD_FSA506) && defined(NU_PKG_USING_FSA506_EBI)
|
|
#include <drv_ebi.h>
|
|
#include "NuMicro.h"
|
|
#include <lcd_fsa506.h>
|
|
#if defined(PKG_USING_GUIENGINE)
|
|
#include <rtgui/driver.h>
|
|
#endif
|
|
int rt_hw_fsa506_port(void)
|
|
{
|
|
rt_err_t ret = RT_EOK;
|
|
|
|
/* Open ebi BOARD_USING_FSA506_EBI_PORT */
|
|
ret = nu_ebi_init(BOARD_USING_FSA506_EBI_PORT, EBI_BUSWIDTH_16BIT, EBI_TIMING_SLOW, EBI_OPMODE_CACCESS, EBI_CS_ACTIVE_LOW);
|
|
if (ret != RT_EOK)
|
|
return ret;
|
|
|
|
if (rt_hw_lcd_fsa506_ebi_init(EBI_BANK0_BASE_ADDR + BOARD_USING_FSA506_EBI_PORT * EBI_MAX_SIZE) != RT_EOK)
|
|
return -1;
|
|
|
|
rt_hw_lcd_fsa506_init();
|
|
|
|
#if defined(PKG_USING_GUIENGINE)
|
|
rt_device_t lcd_fsa506 = rt_device_find("lcd");
|
|
if (lcd_fsa506)
|
|
{
|
|
rtgui_graphic_set_device(lcd_fsa506);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
INIT_COMPONENT_EXPORT(rt_hw_fsa506_port);
|
|
#endif /* BOARD_USING_LCD_FSA506 */
|
|
|
|
|
|
|
|
#if defined(BOARD_USING_ST1663I) && defined(NU_PKG_USING_TPC_ST1663I)
|
|
#include "st1663i.h"
|
|
|
|
#define ST1663I_RST_PIN NU_GET_PININDEX(NU_PD, 10)
|
|
#define ST1663I_IRQ_PIN NU_GET_PININDEX(NU_PG, 6)
|
|
|
|
extern int tpc_sample(const char *name);
|
|
int rt_hw_st1663i_port(void)
|
|
{
|
|
struct rt_touch_config cfg;
|
|
rt_base_t rst_pin = ST1663I_RST_PIN;
|
|
cfg.dev_name = "i2c1";
|
|
cfg.irq_pin.pin = ST1663I_IRQ_PIN;
|
|
cfg.irq_pin.mode = PIN_MODE_INPUT_PULLUP;
|
|
cfg.user_data = &rst_pin;
|
|
|
|
rt_hw_st1663i_init("st1663i", &cfg);
|
|
return tpc_sample("st1663i");
|
|
|
|
}
|
|
INIT_ENV_EXPORT(rt_hw_st1663i_port);
|
|
#endif /* if defined(BOARD_USING_ST1663I) && defined(NU_PKG_USING_TPC_ST1663I) */
|
|
|
|
#if defined(BOARD_USING_SENSOR0)
|
|
#include "ccap_sensor.h"
|
|
|
|
#define SENSOR0_RST_PIN NU_GET_PININDEX(NU_PG, 11)
|
|
#define SENSOR0_PD_PIN NU_GET_PININDEX(NU_PD, 12)
|
|
|
|
ccap_sensor_io sIo_sensor0 =
|
|
{
|
|
.RstPin = SENSOR0_RST_PIN,
|
|
.PwrDwnPin = SENSOR0_PD_PIN,
|
|
.I2cName = "i2c0"
|
|
};
|
|
|
|
int rt_hw_sensor0_port(void)
|
|
{
|
|
return nu_ccap_sensor_create(&sIo_sensor0, (ccap_sensor_id)BOARD_USING_SENSON0_ID, "sensor0");
|
|
}
|
|
INIT_COMPONENT_EXPORT(rt_hw_sensor0_port);
|
|
|
|
#endif /* BOARD_USING_SENSOR0 */
|
|
|
|
#if defined(BOARD_USING_NCT7717U)
|
|
|
|
#include "sensor_nct7717u.h"
|
|
|
|
int rt_hw_nct7717u_port(void)
|
|
{
|
|
struct rt_sensor_config cfg;
|
|
|
|
cfg.intf.dev_name = "i2c2";
|
|
cfg.irq_pin.pin = PIN_IRQ_PIN_NONE;
|
|
|
|
return rt_hw_nct7717u_init("nct7717u", &cfg);
|
|
}
|
|
INIT_APP_EXPORT(rt_hw_nct7717u_port);
|
|
#endif /* BOARD_USING_NCT7717U */
|