1637 lines
180 KiB
C
1637 lines
180 KiB
C
/**************************************************************************//**
|
|
* @file SYS.h
|
|
* @version V3.0
|
|
* @brief M480 Series SYS Driver Header File
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
* @copyright (C) 2016-2020 Nuvoton Technology Corp. All rights reserved.
|
|
******************************************************************************/
|
|
|
|
#ifndef __NU_SYS_H__
|
|
#define __NU_SYS_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
|
|
/** @addtogroup Standard_Driver Standard Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup SYS_Driver SYS Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup SYS_EXPORTED_CONSTANTS SYS Exported Constants
|
|
@{
|
|
*/
|
|
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Module Reset Control Resister constant definitions. */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define PDMA_RST ((0UL<<24) | SYS_IPRST0_PDMARST_Pos) /*!< Reset PDMA \hideinitializer*/
|
|
#define EBI_RST ((0UL<<24) | SYS_IPRST0_EBIRST_Pos) /*!< Reset EBI \hideinitializer*/
|
|
#define EMAC_RST ((0UL<<24) | SYS_IPRST0_EMACRST_Pos) /*!< Reset EMAC \hideinitializer */
|
|
#define SDH0_RST ((0UL<<24) | SYS_IPRST0_SDH0RST_Pos) /*!< Reset SDH0 \hideinitializer */
|
|
#define CRC_RST ((0UL<<24) | SYS_IPRST0_CRCRST_Pos) /*!< Reset CRC \hideinitializer */
|
|
#define CCAP_RST ((0UL<<24) | SYS_IPRST0_CCAPRST_Pos) /*!< Reset ICAP \hideinitializer */
|
|
#define HSUSBD_RST ((0UL<<24) | SYS_IPRST0_HSUSBDRST_Pos) /*!< Reset HSUSBD \hideinitializer */
|
|
#define CRPT_RST ((0UL<<24) | SYS_IPRST0_CRPTRST_Pos) /*!< Reset CRPT \hideinitializer */
|
|
#define SPIM_RST ((0UL<<24) | SYS_IPRST0_SPIMRST_Pos) /*!< Reset SPIM \hideinitializer */
|
|
#define USBH_RST ((0UL<<24) | SYS_IPRST0_USBHRST_Pos) /*!< Reset USBH \hideinitializer */
|
|
#define SDH1_RST ((0UL<<24) | SYS_IPRST0_SDH1RST_Pos) /*!< Reset SDH1 \hideinitializer */
|
|
|
|
#define GPIO_RST ((4UL<<24) | SYS_IPRST1_GPIORST_Pos) /*!< Reset GPIO \hideinitializer */
|
|
#define TMR0_RST ((4UL<<24) | SYS_IPRST1_TMR0RST_Pos) /*!< Reset TMR0 \hideinitializer */
|
|
#define TMR1_RST ((4UL<<24) | SYS_IPRST1_TMR1RST_Pos) /*!< Reset TMR1 \hideinitializer */
|
|
#define TMR2_RST ((4UL<<24) | SYS_IPRST1_TMR2RST_Pos) /*!< Reset TMR2 \hideinitializer */
|
|
#define TMR3_RST ((4UL<<24) | SYS_IPRST1_TMR3RST_Pos) /*!< Reset TMR3 \hideinitializer */
|
|
#define ACMP01_RST ((4UL<<24) | SYS_IPRST1_ACMP01RST_Pos) /*!< Reset ACMP01 \hideinitializer */
|
|
#define I2C0_RST ((4UL<<24) | SYS_IPRST1_I2C0RST_Pos) /*!< Reset I2C0 \hideinitializer */
|
|
#define I2C1_RST ((4UL<<24) | SYS_IPRST1_I2C1RST_Pos) /*!< Reset I2C1 \hideinitializer */
|
|
#define I2C2_RST ((4UL<<24) | SYS_IPRST1_I2C2RST_Pos) /*!< Reset I2C2 \hideinitializer */
|
|
#define QSPI0_RST ((4UL<<24) | SYS_IPRST1_QSPI0RST_Pos) /*!< Reset QSPI0 \hideinitializer */
|
|
#define SPI0_RST ((4UL<<24) | SYS_IPRST1_SPI0RST_Pos) /*!< Reset SPI0 \hideinitializer */
|
|
#define SPI1_RST ((4UL<<24) | SYS_IPRST1_SPI1RST_Pos) /*!< Reset SPI1 \hideinitializer */
|
|
#define SPI2_RST ((4UL<<24) | SYS_IPRST1_SPI2RST_Pos) /*!< Reset SPI2 \hideinitializer */
|
|
#define UART0_RST ((4UL<<24) | SYS_IPRST1_UART0RST_Pos) /*!< Reset UART0 \hideinitializer */
|
|
#define UART1_RST ((4UL<<24) | SYS_IPRST1_UART1RST_Pos) /*!< Reset UART1 \hideinitializer */
|
|
#define UART2_RST ((4UL<<24) | SYS_IPRST1_UART2RST_Pos) /*!< Reset UART2 \hideinitializer */
|
|
#define UART3_RST ((4UL<<24) | SYS_IPRST1_UART3RST_Pos) /*!< Reset UART3 \hideinitializer */
|
|
#define UART4_RST ((4UL<<24) | SYS_IPRST1_UART4RST_Pos) /*!< Reset UART4 \hideinitializer */
|
|
#define UART5_RST ((4UL<<24) | SYS_IPRST1_UART5RST_Pos) /*!< Reset UART5 \hideinitializer */
|
|
#define UART6_RST ((4UL<<24) | SYS_IPRST1_UART6RST_Pos) /*!< Reset UART6 \hideinitializer */
|
|
#define UART7_RST ((4UL<<24) | SYS_IPRST1_UART7RST_Pos) /*!< Reset UART7 \hideinitializer */
|
|
#define CAN0_RST ((4UL<<24) | SYS_IPRST1_CAN0RST_Pos) /*!< Reset CAN0 \hideinitializer */
|
|
#define CAN1_RST ((4UL<<24) | SYS_IPRST1_CAN1RST_Pos) /*!< Reset CAN1 \hideinitializer */
|
|
#define OTG_RST ((4UL<<24) | SYS_IPRST1_OTGRST_Pos) /*!< Reset OTG \hideinitializer */
|
|
#define USBD_RST ((4UL<<24) | SYS_IPRST1_USBDRST_Pos) /*!< Reset USBD \hideinitializer */
|
|
#define EADC_RST ((4UL<<24) | SYS_IPRST1_EADCRST_Pos) /*!< Reset EADC \hideinitializer */
|
|
#define I2S0_RST ((4UL<<24) | SYS_IPRST1_I2S0RST_Pos) /*!< Reset I2S0 \hideinitializer */
|
|
#define HSOTG_RST ((4UL<<24) | SYS_IPRST1_HSOTGRST_Pos) /*!< Reset HSOTG \hideinitializer */
|
|
#define TRNG_RST ((4UL<<24) | SYS_IPRST1_TRNGRST_Pos) /*!< Reset TRNG \hideinitializer */
|
|
|
|
#define SC0_RST ((8UL<<24) | SYS_IPRST2_SC0RST_Pos) /*!< Reset SC0 \hideinitializer */
|
|
#define SC1_RST ((8UL<<24) | SYS_IPRST2_SC1RST_Pos) /*!< Reset SC1 \hideinitializer */
|
|
#define SC2_RST ((8UL<<24) | SYS_IPRST2_SC2RST_Pos) /*!< Reset SC2 \hideinitializer */
|
|
#define QSPI1_RST ((8UL<<24) | SYS_IPRST2_QSPI1RST_Pos) /*!< Reset QSPI1 \hideinitializer */
|
|
#define SPI3_RST ((8UL<<24) | SYS_IPRST2_SPI3RST_Pos) /*!< Reset SPI3 \hideinitializer */
|
|
#define USCI0_RST ((8UL<<24) | SYS_IPRST2_USCI0RST_Pos) /*!< Reset USCI0 \hideinitializer */
|
|
#define USCI1_RST ((8UL<<24) | SYS_IPRST2_USCI1RST_Pos) /*!< Reset USCI1 \hideinitializer */
|
|
#define DAC_RST ((8UL<<24) | SYS_IPRST2_DACRST_Pos) /*!< Reset DAC \hideinitializer */
|
|
#define EPWM0_RST ((8UL<<24) | SYS_IPRST2_EPWM0RST_Pos) /*!< Reset EPWM0 \hideinitializer */
|
|
#define EPWM1_RST ((8UL<<24) | SYS_IPRST2_EPWM1RST_Pos) /*!< Reset EPWM1 \hideinitializer */
|
|
#define BPWM0_RST ((8UL<<24) | SYS_IPRST2_BPWM0RST_Pos) /*!< Reset BPWM0 \hideinitializer */
|
|
#define BPWM1_RST ((8UL<<24) | SYS_IPRST2_BPWM1RST_Pos) /*!< Reset BPWM1 \hideinitializer */
|
|
#define QEI0_RST ((8UL<<24) | SYS_IPRST2_QEI0RST_Pos) /*!< Reset QEI0 \hideinitializer */
|
|
#define QEI1_RST ((8UL<<24) | SYS_IPRST2_QEI1RST_Pos) /*!< Reset QEI1 \hideinitializer */
|
|
#define ECAP0_RST ((8UL<<24) | SYS_IPRST2_ECAP0RST_Pos) /*!< Reset ECAP0 \hideinitializer */
|
|
#define ECAP1_RST ((8UL<<24) | SYS_IPRST2_ECAP1RST_Pos) /*!< Reset ECAP1 \hideinitializer */
|
|
#define CAN2_RST ((8UL<<24) | SYS_IPRST2_CAN2RST_Pos) /*!< Reset CAN2 \hideinitializer */
|
|
#define OPA_RST ((8UL<<24) | SYS_IPRST2_OPARST_Pos) /*!< Reset OPA \hideinitializer */
|
|
#define EADC1_RST ((8UL<<24) | SYS_IPRST2_EADC1RST_Pos) /*!< Reset EADC1 \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Brown Out Detector Threshold Voltage Selection constant definitions. */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define SYS_BODCTL_BOD_RST_EN (1UL << SYS_BODCTL_BODRSTEN_Pos) /*!< Brown-out Reset Enable \hideinitializer */
|
|
#define SYS_BODCTL_BOD_INTERRUPT_EN (0UL << SYS_BODCTL_BODRSTEN_Pos) /*!< Brown-out Interrupt Enable \hideinitializer */
|
|
#define SYS_BODCTL_BODVL_3_0V (7UL << SYS_BODCTL_BODVL_Pos) /*!< Setting Brown Out Detector Threshold Voltage as 3.0V \hideinitializer */
|
|
#define SYS_BODCTL_BODVL_2_8V (6UL << SYS_BODCTL_BODVL_Pos) /*!< Setting Brown Out Detector Threshold Voltage as 2.8V \hideinitializer */
|
|
#define SYS_BODCTL_BODVL_2_6V (5UL << SYS_BODCTL_BODVL_Pos) /*!< Setting Brown Out Detector Threshold Voltage as 2.6V \hideinitializer */
|
|
#define SYS_BODCTL_BODVL_2_4V (4UL << SYS_BODCTL_BODVL_Pos) /*!< Setting Brown Out Detector Threshold Voltage as 2.4V \hideinitializer */
|
|
#define SYS_BODCTL_BODVL_2_2V (3UL << SYS_BODCTL_BODVL_Pos) /*!< Setting Brown Out Detector Threshold Voltage as 2.2V \hideinitializer */
|
|
#define SYS_BODCTL_BODVL_2_0V (2UL << SYS_BODCTL_BODVL_Pos) /*!< Setting Brown Out Detector Threshold Voltage as 2.0V \hideinitializer */
|
|
#define SYS_BODCTL_BODVL_1_8V (1UL << SYS_BODCTL_BODVL_Pos) /*!< Setting Brown Out Detector Threshold Voltage as 1.8V \hideinitializer */
|
|
#define SYS_BODCTL_BODVL_1_6V (0UL << SYS_BODCTL_BODVL_Pos) /*!< Setting Brown Out Detector Threshold Voltage as 1.6V \hideinitializer */
|
|
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* VREFCTL constant definitions. (Write-Protection Register) */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define SYS_VREFCTL_VREF_PIN (0x0UL << SYS_VREFCTL_VREFCTL_Pos) /*!< Vref = Vref pin \hideinitializer */
|
|
#define SYS_VREFCTL_VREF_1_6V (0x3UL << SYS_VREFCTL_VREFCTL_Pos) /*!< Vref = 1.6V \hideinitializer */
|
|
#define SYS_VREFCTL_VREF_2_0V (0x7UL << SYS_VREFCTL_VREFCTL_Pos) /*!< Vref = 2.0V \hideinitializer */
|
|
#define SYS_VREFCTL_VREF_2_5V (0xBUL << SYS_VREFCTL_VREFCTL_Pos) /*!< Vref = 2.5V \hideinitializer */
|
|
#define SYS_VREFCTL_VREF_3_0V (0xFUL << SYS_VREFCTL_VREFCTL_Pos) /*!< Vref = 3.0V \hideinitializer */
|
|
#define SYS_VREFCTL_VREF_AVDD (0x10UL << SYS_VREFCTL_VREFCTL_Pos) /*!< Vref = AVDD \hideinitializer */
|
|
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* USBPHY constant definitions. (Write-Protection Register) */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define SYS_USBPHY_USBROLE_STD_USBD (0x0UL << SYS_USBPHY_USBROLE_Pos) /*!< Standard USB device \hideinitializer */
|
|
#define SYS_USBPHY_USBROLE_STD_USBH (0x1UL << SYS_USBPHY_USBROLE_Pos) /*!< Standard USB host \hideinitializer */
|
|
#define SYS_USBPHY_USBROLE_ID_DEPH (0x2UL << SYS_USBPHY_USBROLE_Pos) /*!< ID dependent device \hideinitializer */
|
|
#define SYS_USBPHY_USBROLE_ON_THE_GO (0x3UL << SYS_USBPHY_USBROLE_Pos) /*!< On-The-Go device \hideinitializer */
|
|
#define SYS_USBPHY_HSUSBROLE_STD_USBD (0x0UL << SYS_USBPHY_HSUSBROLE_Pos) /*!< Standard HSUSB device \hideinitializer */
|
|
#define SYS_USBPHY_HSUSBROLE_STD_USBH (0x1UL << SYS_USBPHY_HSUSBROLE_Pos) /*!< Standard HSUSB host \hideinitializer */
|
|
#define SYS_USBPHY_HSUSBROLE_ID_DEPH (0x2UL << SYS_USBPHY_HSUSBROLE_Pos) /*!< ID dependent device \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* PLCTL constant definitions. (Write-Protection Register) */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define SYS_PLCTL_PLSEL_PL0 (0x0UL<<SYS_PLCTL_PLSEL_Pos) /*!< Set power level to power level 0 */
|
|
#define SYS_PLCTL_PLSEL_PL1 (0x1UL<<SYS_PLCTL_PLSEL_Pos) /*!< Set power level to power level 1 */
|
|
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Multi-Function constant definitions. */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* How to use below #define?
|
|
Example 1: If user want to set PA.0 as SC0_CLK in initial function,
|
|
user can issue following command to achieve it.
|
|
|
|
SYS->GPA_MFPL = (SYS->GPA_MFPL & (~SYS_GPA_MFPL_PA0MFP_Msk) ) | SYS_GPA_MFPL_PA0_MFP_SC0_CLK ;
|
|
|
|
*/
|
|
/********************* Bit definition of GPA_MFPL register **********************/
|
|
#define SYS_GPA_MFPL_PA0MFP_GPIO (0x00UL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_SPIM_MOSI (0x02UL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< 1st SPIM MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_QSPI0_MOSI0 (0x03UL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< 1st QSPI0 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_SPI0_MOSI (0x04UL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< 1st SPI0 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_SD1_DAT0 (0x05UL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< SD/SDIO 1 data line bit 0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_SC0_CLK (0x06UL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< SmartCard0 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_UART0_RXD (0x07UL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< Data receiver input pin for UART0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_UART1_nRTS (0x08UL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< Request to Send output pin for UART1. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_I2C2_SDA (0x09UL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< I2C2 data input/output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_CCAP_DATA6 (0x0AUL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< Sensor pixel data6 input pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_BPWM0_CH0 (0x0CUL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< BPWM0 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_EPWM0_CH5 (0x0DUL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< EPWM0 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA0MFP_DAC0_ST (0x0FUL<<SYS_GPA_MFPL_PA0MFP_Pos) /*!< DAC0 external trigger input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_GPIO (0x00UL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_SPIM_MISO (0x02UL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< 1st SPIM MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_QSPI0_MISO0 (0x03UL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< 1st QSPI0 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_SPI0_MISO (0x04UL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< 1st SPI0 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_SD1_DAT1 (0x05UL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< SD/SDIO 1 data line bit 1. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_SC0_DAT (0x06UL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< SmartCard0 data pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_UART0_TXD (0x07UL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< Data transmitter output pin for UART0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_UART1_nCTS (0x08UL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< Clear to Send input pin for UART1. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_I2C2_SCL (0x09UL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< I2C2 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_CCAP_DATA7 (0x0AUL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< Sensor pixel data7 input pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_BPWM0_CH1 (0x0CUL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< BPWM0 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_EPWM0_CH4 (0x0DUL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< EPWM0 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA1MFP_DAC1_ST (0x0FUL<<SYS_GPA_MFPL_PA1MFP_Pos) /*!< DAC1 external trigger input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_GPIO (0x00UL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_SPIM_CLK (0x02UL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< SPIM serial clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_QSPI0_CLK (0x03UL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< QSPI0 serial clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_SPI0_CLK (0x04UL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< SPI0 serial clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_SD1_DAT2 (0x05UL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< SD/SDIO 1 data line bit 2. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_SC0_RST (0x06UL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< SmartCard0 reset pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_UART4_RXD (0x07UL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< Data receiver input pin for UART4. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_UART1_RXD (0x08UL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< Data receiver input pin for UART1. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_I2C1_SDA (0x09UL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< I2C1 data input/output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_I2C0_SMBSUS (0x0AUL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< I2C0 SMBus SMBSUS# pin (PMBus CONTROL pin) \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_BPWM0_CH2 (0x0CUL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< BPWM0 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA2MFP_EPWM0_CH3 (0x0DUL<<SYS_GPA_MFPL_PA2MFP_Pos) /*!< EPWM0 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_GPIO (0x00UL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_SPIM_SS (0x02UL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< 1st SPIM slave select pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_QSPI0_SS (0x03UL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< 1st QSPI0 slave select pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_SPI0_SS (0x04UL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< 1st SPI0 slave select pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_SD1_DAT3 (0x05UL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< SD/SDIO 1 data line bit 3. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_SC0_PWR (0x06UL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< SmartCard0 power pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_UART4_TXD (0x07UL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< Data transmitter output pin for UART4. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_UART1_TXD (0x08UL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< Data transmitter output pin for UART1. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_I2C1_SCL (0x09UL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< I2C1 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_I2C0_SMBAL (0x0AUL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< I2C0 SMBus SMBALTER# pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_BPWM0_CH3 (0x0CUL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< BPWM0 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_EPWM0_CH2 (0x0DUL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< EPWM0 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_QEI0_B (0x0EUL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< Quadrature encoder phase B input of QEI Unit 0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA3MFP_EPWM1_BRAKE1 (0x0FUL<<SYS_GPA_MFPL_PA3MFP_Pos) /*!< Brake input pin 1 of EPWM1. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_GPIO (0x00UL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_SPIM_D3 (0x02UL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< SPIM data 3 pin for Quad Mode I/O. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_QSPI0_MOSI1 (0x03UL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< 2nd QSPI0 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_SPI0_I2SMCLK (0x04UL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< SPI0 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_SD1_CLK (0x05UL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< SD/SDIO 1 clock. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_SC0_nCD (0x06UL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< SmartCard0 card detect pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_UART0_nRTS (0x07UL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< Request to Send output pin for UART0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_UART5_RXD (0x08UL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< Data receiver input pin for UART5. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_I2C0_SDA (0x09UL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< I2C0 data input/output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_CAN0_RXD (0x0AUL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< CAN0 bus receiver input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_UART0_RXD (0x0BUL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< Data receiver input pin for UART0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_BPWM0_CH4 (0x0CUL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< BPWM0 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_EPWM0_CH1 (0x0DUL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< EPWM0 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA4MFP_QEI0_A (0x0EUL<<SYS_GPA_MFPL_PA4MFP_Pos) /*!< Quadrature encoder phase A input of QEI Unit 0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_GPIO (0x00UL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_SPIM_D2 (0x02UL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< SPIM data 2 pin for Quad Mode I/O. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_QSPI0_MISO1 (0x03UL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< 2nd QSPI0 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_SPI1_I2SMCLK (0x04UL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< SPI1 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_SD1_CMD (0x05UL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< SD/SDIO 1 command/response. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_SC2_nCD (0x06UL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< SmartCard2 card detect pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_UART0_nCTS (0x07UL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< Clear to Send input pin for UART0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_UART5_TXD (0x08UL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< Data transmitter output pin for UART5. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_I2C0_SCL (0x09UL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< I2C0 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_CAN0_TXD (0x0AUL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< CAN0 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_UART0_TXD (0x0BUL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< Data transmitter output pin for UART0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_BPWM0_CH5 (0x0CUL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< BPWM0 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_EPWM0_CH0 (0x0DUL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< EPWM0 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA5MFP_QEI0_INDEX (0x0EUL<<SYS_GPA_MFPL_PA5MFP_Pos) /*!< Quadrature encoder index input of QEI Unit 0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_GPIO (0x00UL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_EBI_AD6 (0x02UL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< EBI address/data bus bit6. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_EMAC_RMII_RXERR (0x03UL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< RMII Receive Data error. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_SPI1_SS (0x04UL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< 1st SPI1 slave select pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_SD1_nCD (0x05UL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< SD/SDIO 1 card detect \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_SC2_CLK (0x06UL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< SmartCard2 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_UART0_RXD (0x07UL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< Data receiver input pin for UART0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_I2C1_SDA (0x08UL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< I2C1 data input/output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_QSPI1_MOSI1 (0x09UL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< 2nd QSPI1 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_EPWM1_CH5 (0x0BUL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< EPWM1 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_BPWM1_CH3 (0x0CUL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< BPWM1 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_ACMP1_WLAT (0x0DUL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< Analog comparator1 window latch input pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_TM3 (0x0EUL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< Timer3 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA6MFP_INT0 (0x0FUL<<SYS_GPA_MFPL_PA6MFP_Pos) /*!< External interrupt0 input pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_GPIO (0x00UL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_EBI_AD7 (0x02UL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< EBI address/data bus bit7. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_EMAC_RMII_CRSDV (0x03UL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< MII Receive Data Valid / RMII CRS_DV input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_SPI1_CLK (0x04UL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< SPI1 serial clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_SC2_DAT (0x06UL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< SmartCard2 data pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_UART0_TXD (0x07UL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< Data transmitter output pin for UART0. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_I2C1_SCL (0x08UL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< I2C1 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_QSPI1_MISO1 (0x09UL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< 2nd QSPI1 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_EPWM1_CH4 (0x0BUL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< EPWM1 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_BPWM1_CH2 (0x0CUL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< BPWM1 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_ACMP0_WLAT (0x0DUL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< Analog comparator0 window latch input pin. \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_TM2 (0x0EUL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< Timer2 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPA_MFPL_PA7MFP_INT1 (0x0FUL<<SYS_GPA_MFPL_PA7MFP_Pos) /*!< External interrupt1 input pin. \hideinitializer */
|
|
/********************* Bit definition of GPA_MFPH register **********************/
|
|
#define SYS_GPA_MFPH_PA8MFP_GPIO (0x00UL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_OPA1_P (0x01UL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< Operational amplifier positive input pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_EADC1_CH4 (0x01UL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< EADC1 channel4 analog input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_EBI_ALE (0x02UL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< EBI address latch enable output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_SC2_CLK (0x03UL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< SmartCard2 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_SPI2_MOSI (0x04UL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< 1st SPI2 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_SD1_DAT0 (0x05UL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< SD/SDIO 1 data line bit 0. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_USCI0_CTL1 (0x06UL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< USCI0 control1 pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_UART1_RXD (0x07UL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< Data receiver input pin for UART1. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_UART7_RXD (0x08UL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< Data receiver input pin for UART7. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_BPWM0_CH3 (0x09UL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< BPWM0 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_QEI1_B (0x0AUL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< Quadrature encoder phase B input of QEI Unit 1. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_ECAP0_IC2 (0x0BUL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< Input 0 of enhanced capture unit 2. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_TM3_EXT (0x0DUL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< Timer3 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA8MFP_INT4 (0x0FUL<<SYS_GPA_MFPH_PA8MFP_Pos) /*!< External interrupt4 input pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_GPIO (0x00UL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_OPA1_N (0x01UL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< Operational amplifier negative input pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_EADC1_CH5 (0x01UL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< EADC1 channel5 analog input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_EBI_MCLK (0x02UL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< EBI external clock output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_SC2_DAT (0x03UL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< SmartCard2 data pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_SPI2_MISO (0x04UL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< 1st SPI2 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_SD1_DAT1 (0x05UL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< SD/SDIO 1 data line bit 1. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_USCI0_DAT1 (0x06UL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< USCI0 data1 pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_UART1_TXD (0x07UL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< Data transmitter output pin for UART1. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_UART7_TXD (0x08UL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< Data transmitter output pin for UART7. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_BPWM0_CH2 (0x09UL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< BPWM0 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_QEI1_A (0x0AUL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< Quadrature encoder phase A input of QEI Unit 1. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_ECAP0_IC1 (0x0BUL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< Input 1 of enhanced capture unit 0. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_TM2_EXT (0x0DUL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< Timer2 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA9MFP_SWDH_DAT (0x0FUL<<SYS_GPA_MFPH_PA9MFP_Pos) /*!< SWD Host interface input/output bus bit. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_GPIO (0x00UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_ACMP1_P0 (0x01UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< Analog comparator1 positive input pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_OPA1_O (0x01UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< Operational amplifier output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_EADC1_CH6 (0x01UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< EADC1 channel6 analog input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_EBI_nWR (0x02UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< EBI write enable output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_SC2_RST (0x03UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< SmartCard2 reset pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_SPI2_CLK (0x04UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< SPI2 serial clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_SD1_DAT2 (0x05UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< SD/SDIO 1 data line bit 2. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_USCI0_DAT0 (0x06UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< USCI0 data0 pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_I2C2_SDA (0x07UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< I2C2 data input/output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_UART6_RXD (0x08UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< Data receiver input pin for UART6. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_BPWM0_CH1 (0x09UL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< BPWM0 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_QEI1_INDEX (0x0AUL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< Quadrature encoder index input of QEI Unit 1. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_ECAP0_IC0 (0x0BUL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< Input 0 of enhanced capture unit 0. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_TM1_EXT (0x0DUL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< Timer1 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_DAC0_ST (0x0EUL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< DAC0 external trigger input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA10MFP_SWDH_CLK (0x0FUL<<SYS_GPA_MFPH_PA10MFP_Pos) /*!< SWD Host interface clock output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_GPIO (0x00UL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_ACMP0_P0 (0x01UL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< Analog comparator0 positive input pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_EADC1_CH7 (0x01UL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< EADC1 channel7 analog input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_EBI_nRD (0x02UL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< EBI read enable output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_SC2_PWR (0x03UL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< SmartCard2 power pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_SPI2_SS (0x04UL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< 1st SPI2 slave select pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_SD1_DAT3 (0x05UL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< SD/SDIO 1 data line bit 3. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_USCI0_CLK (0x06UL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< USCI0 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_I2C2_SCL (0x07UL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< I2C2 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_UART6_TXD (0x08UL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< Data transmitter output pin for UART6. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_BPWM0_CH0 (0x09UL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< BPWM0 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_EPWM0_SYNC_OUT (0x0AUL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< EPWM0 counter synchronous trigger output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_TM0_EXT (0x0DUL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< Timer0 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA11MFP_DAC1_ST (0x0EUL<<SYS_GPA_MFPH_PA11MFP_Pos) /*!< DAC1 external trigger input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA12MFP_GPIO (0x00UL<<SYS_GPA_MFPH_PA12MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA12MFP_I2S0_BCLK (0x02UL<<SYS_GPA_MFPH_PA12MFP_Pos) /*!< I2S0 bit clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA12MFP_UART4_TXD (0x03UL<<SYS_GPA_MFPH_PA12MFP_Pos) /*!< Data transmitter output pin for UART4. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA12MFP_I2C1_SCL (0x04UL<<SYS_GPA_MFPH_PA12MFP_Pos) /*!< I2C1 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA12MFP_SPI2_SS (0x05UL<<SYS_GPA_MFPH_PA12MFP_Pos) /*!< 1st SPI2 slave select pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA12MFP_CAN0_TXD (0x06UL<<SYS_GPA_MFPH_PA12MFP_Pos) /*!< CAN0 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA12MFP_SC2_PWR (0x07UL<<SYS_GPA_MFPH_PA12MFP_Pos) /*!< SmartCard2 power pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA12MFP_BPWM1_CH2 (0x0BUL<<SYS_GPA_MFPH_PA12MFP_Pos) /*!< BPWM1 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA12MFP_QEI1_INDEX (0x0CUL<<SYS_GPA_MFPH_PA12MFP_Pos) /*!< Quadrature encoder index input of QEI Unit 1. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA12MFP_USB_VBUS (0x0EUL<<SYS_GPA_MFPH_PA12MFP_Pos) /*!< Power supply from USB Full speed host or HUB. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA13MFP_GPIO (0x00UL<<SYS_GPA_MFPH_PA13MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA13MFP_I2S0_MCLK (0x02UL<<SYS_GPA_MFPH_PA13MFP_Pos) /*!< I2S0 master clock output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA13MFP_UART4_RXD (0x03UL<<SYS_GPA_MFPH_PA13MFP_Pos) /*!< Data receiver input pin for UART4. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA13MFP_I2C1_SDA (0x04UL<<SYS_GPA_MFPH_PA13MFP_Pos) /*!< I2C1 data input/output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA13MFP_SPI2_CLK (0x05UL<<SYS_GPA_MFPH_PA13MFP_Pos) /*!< SPI2 serial clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA13MFP_CAN0_RXD (0x06UL<<SYS_GPA_MFPH_PA13MFP_Pos) /*!< CAN0 bus receiver input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA13MFP_SC2_RST (0x07UL<<SYS_GPA_MFPH_PA13MFP_Pos) /*!< SmartCard2 reset pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA13MFP_BPWM1_CH3 (0x0BUL<<SYS_GPA_MFPH_PA13MFP_Pos) /*!< BPWM1 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA13MFP_QEI1_A (0x0CUL<<SYS_GPA_MFPH_PA13MFP_Pos) /*!< Quadrature encoder phase A input of QEI Unit 1. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA13MFP_USB_D_N (0x0EUL<<SYS_GPA_MFPH_PA13MFP_Pos) /*!< USB Full speed differential signal D-. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA14MFP_GPIO (0x00UL<<SYS_GPA_MFPH_PA14MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA14MFP_I2S0_DI (0x02UL<<SYS_GPA_MFPH_PA14MFP_Pos) /*!< I2S0 data input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA14MFP_UART0_TXD (0x03UL<<SYS_GPA_MFPH_PA14MFP_Pos) /*!< Data transmitter output pin for UART0. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA14MFP_SPI2_MISO (0x05UL<<SYS_GPA_MFPH_PA14MFP_Pos) /*!< 1st SPI2 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA14MFP_I2C2_SCL (0x06UL<<SYS_GPA_MFPH_PA14MFP_Pos) /*!< I2C2 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA14MFP_SC2_DAT (0x07UL<<SYS_GPA_MFPH_PA14MFP_Pos) /*!< SmartCard2 data pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA14MFP_BPWM1_CH4 (0x0BUL<<SYS_GPA_MFPH_PA14MFP_Pos) /*!< BPWM1 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA14MFP_QEI1_B (0x0CUL<<SYS_GPA_MFPH_PA14MFP_Pos) /*!< Quadrature encoder phase B input of QEI Unit 1. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA14MFP_USB_D_P (0x0EUL<<SYS_GPA_MFPH_PA14MFP_Pos) /*!< USB Full speed differential signal D+. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA15MFP_GPIO (0x00UL<<SYS_GPA_MFPH_PA15MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA15MFP_I2S0_DO (0x02UL<<SYS_GPA_MFPH_PA15MFP_Pos) /*!< I2S0 data output. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA15MFP_UART0_RXD (0x03UL<<SYS_GPA_MFPH_PA15MFP_Pos) /*!< Data receiver input pin for UART0. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA15MFP_SPI2_MOSI (0x05UL<<SYS_GPA_MFPH_PA15MFP_Pos) /*!< 1st SPI2 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA15MFP_I2C2_SDA (0x06UL<<SYS_GPA_MFPH_PA15MFP_Pos) /*!< I2C2 data input/output pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA15MFP_SC2_CLK (0x07UL<<SYS_GPA_MFPH_PA15MFP_Pos) /*!< SmartCard2 clock pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA15MFP_BPWM1_CH5 (0x0BUL<<SYS_GPA_MFPH_PA15MFP_Pos) /*!< BPWM1 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA15MFP_EPWM0_SYNC_IN (0x0CUL<<SYS_GPA_MFPH_PA15MFP_Pos) /*!< EPWM0 counter synchronous trigger input pin. \hideinitializer */
|
|
#define SYS_GPA_MFPH_PA15MFP_USB_OTG_ID (0x0EUL<<SYS_GPA_MFPH_PA15MFP_Pos) /*!< USB Full speed identification. \hideinitializer */
|
|
/********************* Bit definition of GPB_MFPL register **********************/
|
|
#define SYS_GPB_MFPL_PB0MFP_GPIO (0x00UL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_EADC0_CH0 (0x01UL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< EADC0 channel0 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_EADC1_CH8 (0x01UL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< EADC1 channel8 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_OPA0_P (0x01UL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< Operational amplifier positive input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_EBI_ADR9 (0x02UL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_SD0_CMD (0x03UL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< SD/SDIO 0 command/response. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_SPI2_I2SMCLK (0x04UL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< SPI2 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_UART2_RXD (0x07UL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< Data receiver input pin for UART2. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_SPI0_I2SMCLK (0x08UL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< SPI0 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_I2C1_SDA (0x09UL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< I2C1 data input/output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_EPWM0_CH5 (0x0BUL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< EPWM0 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_EPWM1_CH5 (0x0CUL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< EPWM1 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB0MFP_EPWM0_BRAKE1 (0x0DUL<<SYS_GPB_MFPL_PB0MFP_Pos) /*!< Brake input pin 1 of EPWM0. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_GPIO (0x00UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_EADC0_CH1 (0x01UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< EADC0 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_OPA0_N (0x01UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< Operational amplifier negative input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_EADC1_CH9 (0x01UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< EADC1 channel9 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_EBI_ADR8 (0x02UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_SD0_CLK (0x03UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< SD/SDIO 0 clock. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_EMAC_RMII_RXERR (0x04UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< RMII Receive Data error. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_SPI1_I2SMCLK (0x05UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< SPI1 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_SPI3_I2SMCLK (0x06UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< SPI3 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_UART2_TXD (0x07UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< Data transmitter output pin for UART2. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_USCI1_CLK (0x08UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< USCI1 clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_I2C1_SCL (0x09UL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< I2C1 clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_I2S0_LRCK (0x0AUL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< I2S0 left right channel clock. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_EPWM0_CH4 (0x0BUL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< EPWM0 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_EPWM1_CH4 (0x0CUL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< EPWM1 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB1MFP_EPWM0_BRAKE0 (0x0DUL<<SYS_GPB_MFPL_PB1MFP_Pos) /*!< Brake input pin 0 of EPWM0. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_GPIO (0x00UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_ACMP0_P1 (0x01UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< Analog comparator0 positive input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_EADC0_CH2 (0x01UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< EADC0 channel2 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_OPA0_O (0x01UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< Operational amplifier output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_EADC1_CH10 (0x01UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< EADC1 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_EBI_ADR3 (0x02UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_SD0_DAT0 (0x03UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< SD/SDIO 0 data line bit 0. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_EMAC_RMII_CRSDV (0x04UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< MII Receive Data Valid / RMII CRS_DV input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_SPI1_SS (0x05UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< 1st SPI1 slave select pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_UART1_RXD (0x06UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< Data receiver input pin for UART1. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_UART5_nCTS (0x07UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< Clear to Send input pin for UART5. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_USCI1_DAT0 (0x08UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< USCI1 data0 pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_SC0_PWR (0x09UL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< SmartCard0 power pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_I2S0_DO (0x0AUL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< I2S0 data output. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_EPWM0_CH3 (0x0BUL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< EPWM0 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_I2C1_SDA (0x0CUL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< I2C1 data input/output pin. */
|
|
#define SYS_GPB_MFPL_PB2MFP_TM3 (0x0EUL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< Timer3 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB2MFP_INT3 (0x0FUL<<SYS_GPB_MFPL_PB2MFP_Pos) /*!< External interrupt3 input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_GPIO (0x00UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_ACMP0_N (0x01UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< Analog comparator0 negative input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_EADC0_CH3 (0x01UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< EADC0 channel3 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_EADC1_CH11 (0x01UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< EADC1 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_EBI_ADR2 (0x02UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_SD0_DAT1 (0x03UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< SD/SDIO 0 data line bit 1. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_EMAC_RMII_RXD1 (0x04UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< RMII Receive Data bus bit 1. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_SPI1_CLK (0x05UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< SPI1 serial clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_UART1_TXD (0x06UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< Data transmitter output pin for UART1. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_UART5_nRTS (0x07UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< Request to Send output pin for UART5. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_USCI1_DAT1 (0x08UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< USCI1 data1 pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_SC0_RST (0x09UL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< SmartCard0 reset pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_I2S0_DI (0x0AUL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< I2S0 data input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_EPWM0_CH2 (0x0BUL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< EPWM0 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_I2C1_SCL (0x0CUL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< I2C1 clock pin. */
|
|
#define SYS_GPB_MFPL_PB3MFP_TM2 (0x0EUL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< Timer2 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB3MFP_INT2 (0x0FUL<<SYS_GPB_MFPL_PB3MFP_Pos) /*!< External interrupt2 input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_GPIO (0x00UL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_ACMP1_P1 (0x01UL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< Analog comparator1 positive input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_EADC0_CH4 (0x01UL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< EADC0 channel4 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_EBI_ADR1 (0x02UL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_SD0_DAT2 (0x03UL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< SD/SDIO 0 data line bit 2. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_EMAC_RMII_RXD0 (0x04UL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< RMII Receive Data bus bit 0. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_SPI1_MOSI (0x05UL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< 1st SPI1 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_I2C0_SDA (0x06UL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< I2C0 data input/output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_UART5_RXD (0x07UL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< Data receiver input pin for UART5. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_USCI1_CTL1 (0x08UL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< USCI1 control1 pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_SC0_DAT (0x09UL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< SmartCard0 data pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_I2S0_MCLK (0x0AUL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< I2S0 master clock output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_EPWM0_CH1 (0x0BUL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< EPWM0 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_UART2_RXD (0x0CUL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< Data receiver input pin for UART2. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_TM1 (0x0EUL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< Timer1 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB4MFP_INT1 (0x0FUL<<SYS_GPB_MFPL_PB4MFP_Pos) /*!< External interrupt1 input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_GPIO (0x00UL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_ACMP1_N (0x01UL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< Analog comparator1 negative input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_EADC0_CH5 (0x01UL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< EADC0 channel5 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_EBI_ADR0 (0x02UL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_SD0_DAT3 (0x03UL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< SD/SDIO 0 data line bit 3. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_EMAC_RMII_REFCLK (0x04UL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< EMAC mode clock input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_SPI1_MISO (0x05UL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< 1st SPI1 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_I2C0_SCL (0x06UL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< I2C0 clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_UART5_TXD (0x07UL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< Data transmitter output pin for UART5. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_USCI1_CTL0 (0x08UL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< USCI1 control0 pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_SC0_CLK (0x09UL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< SmartCard0 clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_I2S0_BCLK (0x0AUL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< I2S0 bit clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_EPWM0_CH0 (0x0BUL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< EPWM0 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_UART2_TXD (0x0CUL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< Data transmitter output pin for UART2. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_TM0 (0x0EUL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< Timer0 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB5MFP_INT0 (0x0FUL<<SYS_GPB_MFPL_PB5MFP_Pos) /*!< External interrupt0 input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_GPIO (0x00UL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_EADC0_CH6 (0x01UL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< EADC0 channel6 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_EBI_nWRH (0x02UL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< EBI write enable output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_EMAC_PPS (0x03UL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< EMAC Pulse Per Second output \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_USCI1_DAT1 (0x04UL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< USCI1 data1 pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_CAN1_RXD (0x05UL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< CAN1 bus receiver input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_UART1_RXD (0x06UL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< Data receiver input pin for UART1. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_SD1_CLK (0x07UL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< SD/SDIO 1 clock. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_EBI_nCS1 (0x08UL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< EBI chip select enable output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_BPWM1_CH5 (0x0AUL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< BPWM1 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_EPWM1_BRAKE1 (0x0BUL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< Brake input pin 1 of EPWM1. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_EPWM1_CH5 (0x0CUL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< EPWM1 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_INT4 (0x0DUL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< External interrupt4 input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_USB_VBUS_EN (0x0EUL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< Power supply from USB Full speed host or HUB. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB6MFP_ACMP1_O (0x0FUL<<SYS_GPB_MFPL_PB6MFP_Pos) /*!< Analog comparator1 output. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_GPIO (0x00UL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_EADC0_CH7 (0x01UL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< EADC0 channel7 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_EBI_nWRL (0x02UL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< EBI write enable output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_EMAC_RMII_TXEN (0x03UL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< RMII Transmit Enable. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_USCI1_DAT0 (0x04UL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< USCI1 data0 pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_CAN1_TXD (0x05UL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< CAN1 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_UART1_TXD (0x06UL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< Data transmitter output pin for UART1. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_SD1_CMD (0x07UL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< SD/SDIO 1 command/response. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_EBI_nCS0 (0x08UL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< EBI chip select enable output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_BPWM1_CH4 (0x0AUL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< BPWM1 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_EPWM1_BRAKE0 (0x0BUL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< Brake input pin 0 of EPWM1. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_EPWM1_CH4 (0x0CUL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< EPWM1 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_INT5 (0x0DUL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< External interrupt5 input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_USB_VBUS_ST (0x0EUL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< Power supply from USB Full speed host or HUB. \hideinitializer */
|
|
#define SYS_GPB_MFPL_PB7MFP_ACMP0_O (0x0FUL<<SYS_GPB_MFPL_PB7MFP_Pos) /*!< Analog comparator0 output. \hideinitializer */
|
|
/********************* Bit definition of GPB_MFPH register **********************/
|
|
#define SYS_GPB_MFPH_PB8MFP_GPIO (0x00UL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_EADC0_CH8 (0x01UL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< EADC0 channel8 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_EBI_ADR19 (0x02UL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_EMAC_RMII_TXD1 (0x03UL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< RMII Transmit Data bus bit 1. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_USCI1_CLK (0x04UL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< USCI1 clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_UART0_RXD (0x05UL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< Data receiver input pin for UART0. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_UART1_nRTS (0x06UL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< Request to Send output pin for UART1. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_I2C1_SMBSUS (0x07UL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< I2C1 SMBus SMBSUS# pin (PMBus CONTROL pin) \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_UART7_RXD (0x08UL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< Data receiver input pin for UART7. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_I2C0_SDA (0x09UL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< I2C0 data input/output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_BPWM1_CH3 (0x0AUL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< BPWM1 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_SPI3_MOSI (0x0BUL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< 1st SPI3 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_CAN2_RXD (0x0CUL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< CAN2 bus receiver input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB8MFP_INT6 (0x0DUL<<SYS_GPB_MFPH_PB8MFP_Pos) /*!< External interrupt6 input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_GPIO (0x00UL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_EADC0_CH9 (0x01UL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< EADC0 channel9 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_EBI_ADR18 (0x02UL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_EMAC_RMII_TXD0 (0x03UL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< RMII Transmit Data bus bit 0. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_USCI1_CTL1 (0x04UL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< USCI1 control1 pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_UART0_TXD (0x05UL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< Data transmitter output pin for UART0. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_UART1_nCTS (0x06UL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< Clear to Send input pin for UART1. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_I2C1_SMBAL (0x07UL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< I2C1 SMBus SMBALTER# pin \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_UART7_TXD (0x08UL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< Data transmitter output pin for UART7. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_I2C0_SCL (0x09UL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< I2C0 clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_BPWM1_CH2 (0x0AUL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< BPWM1 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_SPI3_MISO (0x0BUL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< 1st SPI3 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_CAN2_TXD (0x0CUL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< CAN2 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_INT7 (0x0DUL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< External interrupt7 input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB9MFP_CCAP_HSYNC (0x0EUL<<SYS_GPB_MFPH_PB9MFP_Pos) /*!< Sensor horizontal synchronization input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_GPIO (0x00UL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_EADC0_CH10 (0x01UL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< EADC0 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_EBI_ADR17 (0x02UL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_EMAC_RMII_MDIO (0x03UL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< RMII Management Data I/O. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_USCI1_CTL0 (0x04UL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< USCI1 control0 pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_UART0_nRTS (0x05UL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< Request to Send output pin for UART0. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_UART4_RXD (0x06UL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< Data receiver input pin for UART4. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_I2C1_SDA (0x07UL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< I2C1 data input/output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_CAN0_RXD (0x08UL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< CAN0 bus receiver input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_BPWM1_CH1 (0x0AUL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< BPWM1 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_SPI3_SS (0x0BUL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< 1st SPI3 slave select pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_CCAP_VSYNC (0x0CUL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< Sensor vertical synchronization input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB10MFP_HSUSB_VBUS_EN (0x0EUL<<SYS_GPB_MFPH_PB10MFP_Pos) /*!< Power supply from USB High speed host or HUB. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_GPIO (0x00UL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_EADC0_CH11 (0x01UL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< EADC0 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_EBI_ADR16 (0x02UL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_EMAC_RMII_MDC (0x03UL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< RMII Management Data Clock. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_UART0_nCTS (0x05UL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< Clear to Send input pin for UART0. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_UART4_TXD (0x06UL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< Data transmitter output pin for UART4. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_I2C1_SCL (0x07UL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< I2C1 clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_CAN0_TXD (0x08UL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< CAN0 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_SPI0_I2SMCLK (0x09UL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< SPI0 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_BPWM1_CH0 (0x0AUL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< BPWM1 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_SPI3_CLK (0x0BUL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< SPI3 serial clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_CCAP_SFIELD (0x0CUL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< Even/Odd Field Flag input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB11MFP_HSUSB_VBUS_ST (0x0EUL<<SYS_GPB_MFPH_PB11MFP_Pos) /*!< Power supply from USB High speed host or HUB. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_GPIO (0x00UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_ACMP0_P2 (0x01UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< Analog comparator0 positive input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_ACMP1_P2 (0x01UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< Analog comparator1 positive input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_DAC0_OUT (0x01UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< DAC0 channel analog output. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_EADC0_CH12 (0x01UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< EADC0 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_EADC1_CH12 (0x01UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< EADC1 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_EBI_AD15 (0x02UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_SC1_CLK (0x03UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< SmartCard1 clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_SPI0_MOSI (0x04UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< 1st SPI0 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_USCI0_CLK (0x05UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< USCI0 clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_UART0_RXD (0x06UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< Data receiver input pin for UART0. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_UART3_nCTS (0x07UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< Clear to Send input pin for UART3. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_I2C2_SDA (0x08UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< I2C2 data input/output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_SD0_nCD (0x09UL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< SD/SDIO 0 card detect. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_CCAP_SCLK (0x0AUL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< Sensor pixel clock(to sensor) output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_EPWM1_CH3 (0x0BUL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< EPWM1 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_ETM_TRACE_DATA3 (0x0CUL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< ETM Rx input bus bit3. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB12MFP_TM3_EXT (0x0DUL<<SYS_GPB_MFPH_PB12MFP_Pos) /*!< Timer3 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_GPIO (0x00UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_ACMP0_P3 (0x01UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< Analog comparator0 positive input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_ACMP1_P3 (0x01UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< Analog comparator1 positive input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_DAC1_OUT (0x01UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< DAC1 channel analog output. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_EADC0_CH13 (0x01UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< EADC0 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_EADC1_CH13 (0x01UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< EADC1 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_EBI_AD14 (0x02UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_SC1_DAT (0x03UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< SmartCard1 data pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_SPI0_MISO (0x04UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< 1st SPI0 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_USCI0_DAT0 (0x05UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< USCI0 data0 pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_UART0_TXD (0x06UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< Data transmitter output pin for UART0. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_UART3_nRTS (0x07UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< Request to Send output pin for UART3. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_I2C2_SCL (0x08UL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< I2C2 clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_CCAP_PIXCLK (0x0AUL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< Sensor pixel clock(from sensor) input pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_EPWM1_CH2 (0x0BUL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< EPWM1 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_ETM_TRACE_DATA2 (0x0CUL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< ETM Rx input bus bit2. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB13MFP_TM2_EXT (0x0DUL<<SYS_GPB_MFPH_PB13MFP_Pos) /*!< Timer2 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_GPIO (0x00UL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_EADC0_CH14 (0x01UL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< EADC0 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_EADC1_CH14 (0x01UL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< EADC1 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_EBI_AD13 (0x02UL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_SC1_RST (0x03UL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< SmartCard1 reset pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_SPI0_CLK (0x04UL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< SPI0 serial clock pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_USCI0_DAT1 (0x05UL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< USCI0 data1 pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_UART0_nRTS (0x06UL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< Request to Send output pin for UART0. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_UART3_RXD (0x07UL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< Data receiver input pin for UART3. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_I2C2_SMBSUS (0x08UL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< I2C2 SMBus SMBSUS# pin (PMBus CONTROL pin) \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_EPWM1_CH1 (0x0BUL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< EPWM1 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_ETM_TRACE_DATA1 (0x0CUL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< ETM Rx input bus bit1. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_TM1_EXT (0x0DUL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< Timer1 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_CLKO (0x0EUL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< Clock Output pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB14MFP_USB_VBUS_ST (0x0FUL<<SYS_GPB_MFPH_PB14MFP_Pos) /*!< Power supply from USB Full speed host or HUB. */
|
|
#define SYS_GPB_MFPH_PB15MFP_GPIO (0x00UL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_EADC0_CH15 (0x01UL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< EADC0 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_EADC1_CH15 (0x01UL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< EADC1 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_EBI_AD12 (0x02UL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_SC1_PWR (0x03UL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< SmartCard1 power pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_SPI0_SS (0x04UL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< 1st SPI0 slave select pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_USCI0_CTL1 (0x05UL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< USCI0 control1 pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_UART0_nCTS (0x06UL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< Clear to Send input pin for UART0. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_UART3_TXD (0x07UL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< Data transmitter output pin for UART3. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_I2C2_SMBAL (0x08UL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< I2C2 SMBus SMBALTER# pin. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_EPWM0_BRAKE1 (0x0AUL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< Brake input pin 1 of EPWM0. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_EPWM1_CH0 (0x0BUL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< EPWM1 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_ETM_TRACE_DATA0 (0x0CUL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< ETM Rx input bus bit0. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_TM0_EXT (0x0DUL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< Timer0 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_USB_VBUS_EN (0x0EUL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< Power supply from USB Full speed host or HUB. \hideinitializer */
|
|
#define SYS_GPB_MFPH_PB15MFP_HSUSB_VBUS_EN (0x0FUL<<SYS_GPB_MFPH_PB15MFP_Pos) /*!< Power supply from USB High speed host or HUB. \hideinitializer */
|
|
/********************* Bit definition of GPC_MFPL register **********************/
|
|
#define SYS_GPC_MFPL_PC0MFP_GPIO (0x00UL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_EBI_AD0 (0x02UL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< EBI address/data bus bit0. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_SPIM_MOSI (0x03UL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< 1st SPIM MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_QSPI0_MOSI0 (0x04UL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< 1st QSPI0 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_SC1_CLK (0x05UL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< SmartCard1 clock pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_I2S0_LRCK (0x06UL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< I2S0 left right channel clock. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_SPI1_SS (0x07UL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< 1st SPI1 slave select pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_UART2_RXD (0x08UL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< Data receiver input pin for UART2. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_I2C0_SDA (0x09UL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< I2C0 data input/output pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_CAN2_RXD (0x0AUL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< CAN2 bus receiver input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_EPWM1_CH5 (0x0CUL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< EPWM1 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_CCAP_DATA0 (0x0DUL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< Sensor pixel data0 input pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_ACMP1_O (0x0EUL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< Analog comparator1 output. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC0MFP_EADC1_ST (0x0FUL<<SYS_GPC_MFPL_PC0MFP_Pos) /*!< EADC external trigger input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_GPIO (0x00UL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_EBI_AD1 (0x02UL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_SPIM_MISO (0x03UL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< 1st SPIM MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_QSPI0_MISO0 (0x04UL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< 1st QSPI0 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_SC1_DAT (0x05UL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< SmartCard1 data pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_I2S0_DO (0x06UL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< I2S0 data output. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_SPI1_CLK (0x07UL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< SPI1 serial clock pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_UART2_TXD (0x08UL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< Data transmitter output pin for UART2. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_I2C0_SCL (0x09UL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< I2C0 clock pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_CAN2_TXD (0x0AUL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< CAN2 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_EPWM1_CH4 (0x0CUL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< EPWM1 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_CCAP_DATA1 (0x0DUL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< Sensor pixel data1 input pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_ACMP0_O (0x0EUL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< Analog comparator0 output. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC1MFP_EADC0_ST (0x0FUL<<SYS_GPC_MFPL_PC1MFP_Pos) /*!< EADC external trigger input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_GPIO (0x00UL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_EBI_AD2 (0x02UL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< EBI address/data bus bit2. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_SPIM_CLK (0x03UL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< SPIM serial clock pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_QSPI0_CLK (0x04UL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< QSPI0 serial clock pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_SC1_RST (0x05UL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< SmartCard1 reset pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_I2S0_DI (0x06UL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< I2S0 data input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_SPI1_MOSI (0x07UL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< 1st SPI1 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_UART2_nCTS (0x08UL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< Clear to Send input pin for UART2. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_I2C0_SMBSUS (0x09UL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< I2C0 SMBus SMBSUS# pin (PMBus CONTROL pin) \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_CAN1_RXD (0x0AUL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< CAN1 bus receiver input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_UART3_RXD (0x0BUL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< Data receiver input pin for UART3. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_EPWM1_CH3 (0x0CUL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< EPWM1 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_CCAP_DATA2 (0x0DUL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< Sensor pixel data2 input pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC2MFP_QSPI1_MOSI0 (0x0EUL<<SYS_GPC_MFPL_PC2MFP_Pos) /*!< 1st QSPI1 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_GPIO (0x00UL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_EBI_AD3 (0x02UL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< EBI address/data bus bit3. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_SPIM_SS (0x03UL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< 1st SPIM slave select pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_QSPI0_SS (0x04UL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< 1st QSPI0 slave select pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_SC1_PWR (0x05UL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< SmartCard1 power pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_I2S0_MCLK (0x06UL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< I2S0 master clock output pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_SPI1_MISO (0x07UL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< 1st SPI1 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_UART2_nRTS (0x08UL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< Request to Send output pin for UART2. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_I2C0_SMBAL (0x09UL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< I2C0 SMBus SMBALTER# pin \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_CAN1_TXD (0x0AUL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< CAN1 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_UART3_TXD (0x0BUL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< Data transmitter output pin for UART3. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_EPWM1_CH2 (0x0CUL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< EPWM1 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_CCAP_DATA3 (0x0DUL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< Sensor pixel data3 input pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC3MFP_QSPI1_MISO0 (0x0EUL<<SYS_GPC_MFPL_PC3MFP_Pos) /*!< 1st QSPI1 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_GPIO (0x00UL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_EBI_AD4 (0x02UL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< EBI address/data bus bit4. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_SPIM_D3 (0x03UL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< SPIM data 3 pin for Quad Mode I/O. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_QSPI0_MOSI1 (0x04UL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< 2nd QSPI0 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_SC1_nCD (0x05UL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< SmartCard1 card detect pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_I2S0_BCLK (0x06UL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< I2S0 bit clock pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_SPI1_I2SMCLK (0x07UL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< SPI1 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_UART2_RXD (0x08UL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< Data receiver input pin for UART2. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_I2C1_SDA (0x09UL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< I2C1 data input/output pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_CAN0_RXD (0x0AUL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< CAN0 bus receiver input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_UART4_RXD (0x0BUL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< Data receiver input pin for UART4. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_EPWM1_CH1 (0x0CUL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< EPWM1 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_CCAP_DATA4 (0x0DUL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< Sensor pixel data4 input pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC4MFP_QSPI1_CLK (0x0EUL<<SYS_GPC_MFPL_PC4MFP_Pos) /*!< QSPI1 serial clock pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC5MFP_GPIO (0x00UL<<SYS_GPC_MFPL_PC5MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC5MFP_EBI_AD5 (0x02UL<<SYS_GPC_MFPL_PC5MFP_Pos) /*!< EBI address/data bus bit5. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC5MFP_SPIM_D2 (0x03UL<<SYS_GPC_MFPL_PC5MFP_Pos) /*!< SPIM data 2 pin for Quad Mode I/O. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC5MFP_QSPI0_MISO1 (0x04UL<<SYS_GPC_MFPL_PC5MFP_Pos) /*!< 2nd QSPI0 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC5MFP_UART2_TXD (0x08UL<<SYS_GPC_MFPL_PC5MFP_Pos) /*!< Data transmitter output pin for UART2. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC5MFP_I2C1_SCL (0x09UL<<SYS_GPC_MFPL_PC5MFP_Pos) /*!< I2C1 clock pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC5MFP_CAN0_TXD (0x0AUL<<SYS_GPC_MFPL_PC5MFP_Pos) /*!< CAN0 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC5MFP_UART4_TXD (0x0BUL<<SYS_GPC_MFPL_PC5MFP_Pos) /*!< Data transmitter output pin for UART4. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC5MFP_EPWM1_CH0 (0x0CUL<<SYS_GPC_MFPL_PC5MFP_Pos) /*!< EPWM1 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC5MFP_CCAP_DATA5 (0x0DUL<<SYS_GPC_MFPL_PC5MFP_Pos) /*!< Sensor pixel data5 input pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC5MFP_QSPI1_SS (0x0EUL<<SYS_GPC_MFPL_PC5MFP_Pos) /*!< 1st QSPI1 slave select pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_GPIO (0x00UL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_EBI_AD8 (0x02UL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< EBI address/data bus bit8. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_EMAC_RMII_RXD1 (0x03UL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< RMII Receive Data bus bit 1. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_SPI1_MOSI (0x04UL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< 1st SPI1 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_UART4_RXD (0x05UL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< Data receiver input pin for UART4. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_SC2_RST (0x06UL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< SmartCard2 reset pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_UART0_nRTS (0x07UL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< Request to Send output pin for UART0. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_I2C1_SMBSUS (0x08UL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< I2C1 SMBus SMBSUS# pin (PMBus CONTROL pin) \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_UART6_RXD (0x09UL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< Data receiver input pin for UART6. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_EPWM1_CH3 (0x0BUL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< EPWM1 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_BPWM1_CH1 (0x0CUL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< BPWM1 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_TM1 (0x0EUL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< Timer1 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC6MFP_INT2 (0x0FUL<<SYS_GPC_MFPL_PC6MFP_Pos) /*!< External interrupt2 input pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_GPIO (0x00UL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_EBI_AD9 (0x02UL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< EBI address/data bus bit9. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_EMAC_RMII_RXD0 (0x03UL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< RMII Receive Data bus bit 0. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_SPI1_MISO (0x04UL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< 1st SPI1 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_UART4_TXD (0x05UL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< Data transmitter output pin for UART4. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_SC2_PWR (0x06UL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< SmartCard2 power pin. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_UART0_nCTS (0x07UL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< Clear to Send input pin for UART0. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_I2C1_SMBAL (0x08UL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< I2C1 SMBus SMBALTER# pin \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_UART6_TXD (0x09UL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< Data transmitter output pin for UART6. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_EPWM1_CH2 (0x0BUL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< EPWM1 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_BPWM1_CH0 (0x0CUL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< BPWM1 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_TM0 (0x0EUL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< Timer0 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPC_MFPL_PC7MFP_INT3 (0x0FUL<<SYS_GPC_MFPL_PC7MFP_Pos) /*!< External interrupt3 input pin. \hideinitializer */
|
|
/********************* Bit definition of GPC_MFPH register **********************/
|
|
#define SYS_GPC_MFPH_PC8MFP_GPIO (0x00UL<<SYS_GPC_MFPH_PC8MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC8MFP_EBI_ADR16 (0x02UL<<SYS_GPC_MFPH_PC8MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC8MFP_EMAC_RMII_REFCLK (0x03UL<<SYS_GPC_MFPH_PC8MFP_Pos) /*!< EMAC mode clock input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC8MFP_I2C0_SDA (0x04UL<<SYS_GPC_MFPH_PC8MFP_Pos) /*!< I2C0 data input/output pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC8MFP_UART4_nCTS (0x05UL<<SYS_GPC_MFPH_PC8MFP_Pos) /*!< Clear to Send input pin for UART4. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC8MFP_UART1_RXD (0x08UL<<SYS_GPC_MFPH_PC8MFP_Pos) /*!< Data receiver input pin for UART1. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC8MFP_EPWM1_CH1 (0x0BUL<<SYS_GPC_MFPH_PC8MFP_Pos) /*!< EPWM1 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC8MFP_BPWM1_CH4 (0x0CUL<<SYS_GPC_MFPH_PC8MFP_Pos) /*!< BPWM1 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC9MFP_GPIO (0x00UL<<SYS_GPC_MFPH_PC9MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC9MFP_EBI_ADR7 (0x02UL<<SYS_GPC_MFPH_PC9MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC9MFP_UART6_nCTS (0x05UL<<SYS_GPC_MFPH_PC9MFP_Pos) /*!< Clear to Send input pin for UART6. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC9MFP_SPI3_SS (0x06UL<<SYS_GPC_MFPH_PC9MFP_Pos) /*!< 1st SPI3 slave select pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC9MFP_UART3_RXD (0x07UL<<SYS_GPC_MFPH_PC9MFP_Pos) /*!< Data receiver input pin for UART3. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC9MFP_CAN1_RXD (0x09UL<<SYS_GPC_MFPH_PC9MFP_Pos) /*!< CAN1 bus receiver input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC9MFP_EPWM1_CH3 (0x0CUL<<SYS_GPC_MFPH_PC9MFP_Pos) /*!< EPWM1 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC9MFP_EADC1_ST (0x0EUL<<SYS_GPC_MFPH_PC9MFP_Pos) /*!< EADC external trigger input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC10MFP_GPIO (0x00UL<<SYS_GPC_MFPH_PC10MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC10MFP_EBI_ADR6 (0x02UL<<SYS_GPC_MFPH_PC10MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC10MFP_UART6_nRTS (0x05UL<<SYS_GPC_MFPH_PC10MFP_Pos) /*!< Request to Send output pin for UART6. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC10MFP_SPI3_CLK (0x06UL<<SYS_GPC_MFPH_PC10MFP_Pos) /*!< SPI3 serial clock pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC10MFP_UART3_TXD (0x07UL<<SYS_GPC_MFPH_PC10MFP_Pos) /*!< Data transmitter output pin for UART3. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC10MFP_CAN1_TXD (0x09UL<<SYS_GPC_MFPH_PC10MFP_Pos) /*!< CAN1 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC10MFP_ECAP1_IC0 (0x0BUL<<SYS_GPC_MFPH_PC10MFP_Pos) /*!< Input 0 of enhanced capture unit 1. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC10MFP_EPWM1_CH2 (0x0CUL<<SYS_GPC_MFPH_PC10MFP_Pos) /*!< EPWM1 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC10MFP_EADC1_ST (0x0EUL<<SYS_GPC_MFPH_PC10MFP_Pos) /*!< EADC external trigger input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC11MFP_GPIO (0x00UL<<SYS_GPC_MFPH_PC11MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC11MFP_EBI_ADR5 (0x02UL<<SYS_GPC_MFPH_PC11MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC11MFP_UART0_RXD (0x03UL<<SYS_GPC_MFPH_PC11MFP_Pos) /*!< Data receiver input pin for UART0. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC11MFP_I2C0_SDA (0x04UL<<SYS_GPC_MFPH_PC11MFP_Pos) /*!< I2C0 data input/output pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC11MFP_UART6_RXD (0x05UL<<SYS_GPC_MFPH_PC11MFP_Pos) /*!< Data receiver input pin for UART6. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC11MFP_SPI3_MOSI (0x06UL<<SYS_GPC_MFPH_PC11MFP_Pos) /*!< 1st SPI3 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC11MFP_ECAP1_IC1 (0x0BUL<<SYS_GPC_MFPH_PC11MFP_Pos) /*!< Input 1 of enhanced capture unit 1. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC11MFP_EPWM1_CH1 (0x0CUL<<SYS_GPC_MFPH_PC11MFP_Pos) /*!< EPWM1 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC11MFP_ACMP1_O (0x0EUL<<SYS_GPC_MFPH_PC11MFP_Pos) /*!< Analog comparator1 output. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC12MFP_GPIO (0x00UL<<SYS_GPC_MFPH_PC12MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC12MFP_EBI_ADR4 (0x02UL<<SYS_GPC_MFPH_PC12MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC12MFP_UART0_TXD (0x03UL<<SYS_GPC_MFPH_PC12MFP_Pos) /*!< Data transmitter output pin for UART0. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC12MFP_I2C0_SCL (0x04UL<<SYS_GPC_MFPH_PC12MFP_Pos) /*!< I2C0 clock pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC12MFP_UART6_TXD (0x05UL<<SYS_GPC_MFPH_PC12MFP_Pos) /*!< Data transmitter output pin for UART6. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC12MFP_SPI3_MISO (0x06UL<<SYS_GPC_MFPH_PC12MFP_Pos) /*!< 1st SPI3 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC12MFP_SC0_nCD (0x09UL<<SYS_GPC_MFPH_PC12MFP_Pos) /*!< SmartCard0 card detect pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC12MFP_ECAP1_IC2 (0x0BUL<<SYS_GPC_MFPH_PC12MFP_Pos) /*!< Input 1 of enhanced capture unit 2. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC12MFP_EPWM1_CH0 (0x0CUL<<SYS_GPC_MFPH_PC12MFP_Pos) /*!< EPWM1 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC12MFP_ACMP0_O (0x0EUL<<SYS_GPC_MFPH_PC12MFP_Pos) /*!< Analog comparator0 output. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC13MFP_GPIO (0x00UL<<SYS_GPC_MFPH_PC13MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC13MFP_EADC1_CH3 (0x01UL<<SYS_GPC_MFPH_PC13MFP_Pos) /*!< EADC1 channel3 analog input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC13MFP_EBI_ADR10 (0x02UL<<SYS_GPC_MFPH_PC13MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC13MFP_SC2_nCD (0x03UL<<SYS_GPC_MFPH_PC13MFP_Pos) /*!< SmartCard2 card detect pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC13MFP_SPI2_I2SMCLK (0x04UL<<SYS_GPC_MFPH_PC13MFP_Pos) /*!< SPI2 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC13MFP_CAN1_TXD (0x05UL<<SYS_GPC_MFPH_PC13MFP_Pos) /*!< CAN1 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC13MFP_USCI0_CTL0 (0x06UL<<SYS_GPC_MFPH_PC13MFP_Pos) /*!< USCI0 control0 pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC13MFP_UART2_TXD (0x07UL<<SYS_GPC_MFPH_PC13MFP_Pos) /*!< Data transmitter output pin for UART2. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC13MFP_BPWM0_CH4 (0x09UL<<SYS_GPC_MFPH_PC13MFP_Pos) /*!< BPWM0 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC13MFP_CLKO (0x0DUL<<SYS_GPC_MFPH_PC13MFP_Pos) /*!< Clock Output pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC13MFP_EADC0_ST (0x0EUL<<SYS_GPC_MFPH_PC13MFP_Pos) /*!< EADC external trigger input. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC14MFP_GPIO (0x00UL<<SYS_GPC_MFPH_PC14MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC14MFP_EBI_AD11 (0x02UL<<SYS_GPC_MFPH_PC14MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC14MFP_SC1_nCD (0x03UL<<SYS_GPC_MFPH_PC14MFP_Pos) /*!< SmartCard1 card detect pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC14MFP_SPI0_I2SMCLK (0x04UL<<SYS_GPC_MFPH_PC14MFP_Pos) /*!< SPI0 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC14MFP_USCI0_CTL0 (0x05UL<<SYS_GPC_MFPH_PC14MFP_Pos) /*!< USCI0 control0 pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC14MFP_QSPI0_CLK (0x06UL<<SYS_GPC_MFPH_PC14MFP_Pos) /*!< QSPI0 serial clock pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC14MFP_EPWM0_SYNC_IN (0x0BUL<<SYS_GPC_MFPH_PC14MFP_Pos) /*!< EPWM0 counter synchronous trigger input pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC14MFP_ETM_TRACE_CLK (0x0CUL<<SYS_GPC_MFPH_PC14MFP_Pos) /*!< ETM Rx clock input pin. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC14MFP_TM1 (0x0DUL<<SYS_GPC_MFPH_PC14MFP_Pos) /*!< Timer1 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC14MFP_USB_VBUS_ST (0x0EUL<<SYS_GPC_MFPH_PC14MFP_Pos) /*!< Power supply from USB Full speed host or HUB. \hideinitializer */
|
|
#define SYS_GPC_MFPH_PC14MFP_HSUSB_VBUS_ST (0x0FUL<<SYS_GPC_MFPH_PC14MFP_Pos) /*!< Power supply from USB High speed host or HUB. \hideinitializer */
|
|
/********************* Bit definition of GPD_MFPL register **********************/
|
|
#define SYS_GPD_MFPL_PD0MFP_GPIO (0x00UL<<SYS_GPD_MFPL_PD0MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD0MFP_EBI_AD13 (0x02UL<<SYS_GPD_MFPL_PD0MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD0MFP_USCI0_CLK (0x03UL<<SYS_GPD_MFPL_PD0MFP_Pos) /*!< USCI0 clock pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD0MFP_SPI0_MOSI (0x04UL<<SYS_GPD_MFPL_PD0MFP_Pos) /*!< 1st SPI0 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD0MFP_UART3_RXD (0x05UL<<SYS_GPD_MFPL_PD0MFP_Pos) /*!< Data receiver input pin for UART3. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD0MFP_I2C2_SDA (0x06UL<<SYS_GPD_MFPL_PD0MFP_Pos) /*!< I2C2 data input/output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD0MFP_SC2_CLK (0x07UL<<SYS_GPD_MFPL_PD0MFP_Pos) /*!< SmartCard2 clock pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD0MFP_TM2 (0x0EUL<<SYS_GPD_MFPL_PD0MFP_Pos) /*!< Timer2 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD1MFP_GPIO (0x00UL<<SYS_GPD_MFPL_PD1MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD1MFP_EBI_AD12 (0x02UL<<SYS_GPD_MFPL_PD1MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD1MFP_USCI0_DAT0 (0x03UL<<SYS_GPD_MFPL_PD1MFP_Pos) /*!< USCI0 data0 pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD1MFP_SPI0_MISO (0x04UL<<SYS_GPD_MFPL_PD1MFP_Pos) /*!< 1st SPI0 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD1MFP_UART3_TXD (0x05UL<<SYS_GPD_MFPL_PD1MFP_Pos) /*!< Data transmitter output pin for UART3. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD1MFP_I2C2_SCL (0x06UL<<SYS_GPD_MFPL_PD1MFP_Pos) /*!< I2C2 clock pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD1MFP_SC2_DAT (0x07UL<<SYS_GPD_MFPL_PD1MFP_Pos) /*!< SmartCard2 data pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD2MFP_GPIO (0x00UL<<SYS_GPD_MFPL_PD2MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD2MFP_EBI_AD11 (0x02UL<<SYS_GPD_MFPL_PD2MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD2MFP_USCI0_DAT1 (0x03UL<<SYS_GPD_MFPL_PD2MFP_Pos) /*!< USCI0 data1 pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD2MFP_SPI0_CLK (0x04UL<<SYS_GPD_MFPL_PD2MFP_Pos) /*!< SPI0 serial clock pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD2MFP_UART3_nCTS (0x05UL<<SYS_GPD_MFPL_PD2MFP_Pos) /*!< Clear to Send input pin for UART3. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD2MFP_SC2_RST (0x07UL<<SYS_GPD_MFPL_PD2MFP_Pos) /*!< SmartCard2 reset pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD2MFP_UART0_RXD (0x09UL<<SYS_GPD_MFPL_PD2MFP_Pos) /*!< Data receiver input pin for UART0. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD3MFP_GPIO (0x00UL<<SYS_GPD_MFPL_PD3MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD3MFP_EBI_AD10 (0x02UL<<SYS_GPD_MFPL_PD3MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD3MFP_USCI0_CTL1 (0x03UL<<SYS_GPD_MFPL_PD3MFP_Pos) /*!< USCI0 control1 pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD3MFP_SPI0_SS (0x04UL<<SYS_GPD_MFPL_PD3MFP_Pos) /*!< 1st SPI0 slave select pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD3MFP_UART3_nRTS (0x05UL<<SYS_GPD_MFPL_PD3MFP_Pos) /*!< Request to Send output pin for UART3. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD3MFP_USCI1_CTL0 (0x06UL<<SYS_GPD_MFPL_PD3MFP_Pos) /*!< USCI1 control0 pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD3MFP_SC2_PWR (0x07UL<<SYS_GPD_MFPL_PD3MFP_Pos) /*!< SmartCard2 power pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD3MFP_SC1_nCD (0x08UL<<SYS_GPD_MFPL_PD3MFP_Pos) /*!< SmartCard1 card detect pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD3MFP_UART0_TXD (0x09UL<<SYS_GPD_MFPL_PD3MFP_Pos) /*!< Data transmitter output pin for UART0. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD4MFP_GPIO (0x00UL<<SYS_GPD_MFPL_PD4MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD4MFP_USCI0_CTL0 (0x03UL<<SYS_GPD_MFPL_PD4MFP_Pos) /*!< USCI0 control0 pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD4MFP_I2C1_SDA (0x04UL<<SYS_GPD_MFPL_PD4MFP_Pos) /*!< I2C1 data input/output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD4MFP_SPI1_SS (0x05UL<<SYS_GPD_MFPL_PD4MFP_Pos) /*!< 1st SPI1 slave select pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD4MFP_USCI1_CTL1 (0x06UL<<SYS_GPD_MFPL_PD4MFP_Pos) /*!< USCI1 control1 pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD4MFP_SC1_CLK (0x08UL<<SYS_GPD_MFPL_PD4MFP_Pos) /*!< SmartCard1 clock pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD4MFP_USB_VBUS_ST (0x0EUL<<SYS_GPD_MFPL_PD4MFP_Pos) /*!< Power supply from USB Full speed host or HUB. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD5MFP_GPIO (0x00UL<<SYS_GPD_MFPL_PD5MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD5MFP_I2C1_SCL (0x04UL<<SYS_GPD_MFPL_PD5MFP_Pos) /*!< I2C1 clock pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD5MFP_SPI1_CLK (0x05UL<<SYS_GPD_MFPL_PD5MFP_Pos) /*!< SPI1 serial clock pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD5MFP_USCI1_DAT0 (0x06UL<<SYS_GPD_MFPL_PD5MFP_Pos) /*!< USCI1 data0 pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD5MFP_SC1_DAT (0x08UL<<SYS_GPD_MFPL_PD5MFP_Pos) /*!< SmartCard1 data pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD6MFP_GPIO (0x00UL<<SYS_GPD_MFPL_PD6MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD6MFP_UART1_RXD (0x03UL<<SYS_GPD_MFPL_PD6MFP_Pos) /*!< Data receiver input pin for UART1. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD6MFP_I2C0_SDA (0x04UL<<SYS_GPD_MFPL_PD6MFP_Pos) /*!< I2C0 data input/output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD6MFP_SPI1_MOSI (0x05UL<<SYS_GPD_MFPL_PD6MFP_Pos) /*!< 1st SPI1 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD6MFP_USCI1_DAT1 (0x06UL<<SYS_GPD_MFPL_PD6MFP_Pos) /*!< USCI1 data1 pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD6MFP_SC1_RST (0x08UL<<SYS_GPD_MFPL_PD6MFP_Pos) /*!< SmartCard1 reset pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD7MFP_GPIO (0x00UL<<SYS_GPD_MFPL_PD7MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD7MFP_UART1_TXD (0x03UL<<SYS_GPD_MFPL_PD7MFP_Pos) /*!< Data transmitter output pin for UART1. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD7MFP_I2C0_SCL (0x04UL<<SYS_GPD_MFPL_PD7MFP_Pos) /*!< I2C0 clock pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD7MFP_SPI1_MISO (0x05UL<<SYS_GPD_MFPL_PD7MFP_Pos) /*!< 1st SPI1 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD7MFP_USCI1_CLK (0x06UL<<SYS_GPD_MFPL_PD7MFP_Pos) /*!< USCI1 clock pin. \hideinitializer */
|
|
#define SYS_GPD_MFPL_PD7MFP_SC1_PWR (0x08UL<<SYS_GPD_MFPL_PD7MFP_Pos) /*!< SmartCard1 power pin. \hideinitializer */
|
|
/********************* Bit definition of GPD_MFPH register **********************/
|
|
#define SYS_GPD_MFPH_PD8MFP_GPIO (0x00UL<<SYS_GPD_MFPH_PD8MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD8MFP_EBI_AD6 (0x02UL<<SYS_GPD_MFPH_PD8MFP_Pos) /*!< EBI address/data bus bit6. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD8MFP_I2C2_SDA (0x03UL<<SYS_GPD_MFPH_PD8MFP_Pos) /*!< I2C2 data input/output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD8MFP_UART2_nRTS (0x04UL<<SYS_GPD_MFPH_PD8MFP_Pos) /*!< Request to Send output pin for UART2. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD8MFP_UART7_RXD (0x05UL<<SYS_GPD_MFPH_PD8MFP_Pos) /*!< Data receiver input pin for UART7. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD8MFP_CAN2_RXD (0x06UL<<SYS_GPD_MFPH_PD8MFP_Pos) /*!< CAN2 bus receiver input. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD9MFP_GPIO (0x00UL<<SYS_GPD_MFPH_PD9MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD9MFP_EBI_AD7 (0x02UL<<SYS_GPD_MFPH_PD9MFP_Pos) /*!< EBI address/data bus bit7. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD9MFP_I2C2_SCL (0x03UL<<SYS_GPD_MFPH_PD9MFP_Pos) /*!< I2C2 clock pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD9MFP_UART2_nCTS (0x04UL<<SYS_GPD_MFPH_PD9MFP_Pos) /*!< Clear to Send input pin for UART2. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD9MFP_UART7_TXD (0x05UL<<SYS_GPD_MFPH_PD9MFP_Pos) /*!< Data transmitter output pin for UART7. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD9MFP_CAN2_TXD (0x06UL<<SYS_GPD_MFPH_PD9MFP_Pos) /*!< CAN2 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD10MFP_GPIO (0x00UL<<SYS_GPD_MFPH_PD10MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD10MFP_OPA2_P (0x01UL<<SYS_GPD_MFPH_PD10MFP_Pos) /*!< Operational amplifier positive input pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD10MFP_EADC1_CH0 (0x01UL<<SYS_GPD_MFPH_PD10MFP_Pos) /*!< EADC1 channel0 analog input. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD10MFP_EBI_nCS2 (0x02UL<<SYS_GPD_MFPH_PD10MFP_Pos) /*!< EBI chip select enable output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD10MFP_UART1_RXD (0x03UL<<SYS_GPD_MFPH_PD10MFP_Pos) /*!< Data receiver input pin for UART1. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD10MFP_CAN0_RXD (0x04UL<<SYS_GPD_MFPH_PD10MFP_Pos) /*!< CAN0 bus receiver input. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD10MFP_QEI0_B (0x0AUL<<SYS_GPD_MFPH_PD10MFP_Pos) /*!< Quadrature encoder phase B input of QEI Unit 0. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD10MFP_INT7 (0x0FUL<<SYS_GPD_MFPH_PD10MFP_Pos) /*!< External interrupt7 input pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD11MFP_GPIO (0x00UL<<SYS_GPD_MFPH_PD11MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD11MFP_EADC1_CH1 (0x01UL<<SYS_GPD_MFPH_PD11MFP_Pos) /*!< EADC1 channel1 analog input. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD11MFP_OPA2_N (0x01UL<<SYS_GPD_MFPH_PD11MFP_Pos) /*!< Operational amplifier negative input pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD11MFP_EBI_nCS1 (0x02UL<<SYS_GPD_MFPH_PD11MFP_Pos) /*!< EBI chip select enable output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD11MFP_UART1_TXD (0x03UL<<SYS_GPD_MFPH_PD11MFP_Pos) /*!< Data transmitter output pin for UART1. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD11MFP_CAN0_TXD (0x04UL<<SYS_GPD_MFPH_PD11MFP_Pos) /*!< CAN0 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD11MFP_QEI0_A (0x0AUL<<SYS_GPD_MFPH_PD11MFP_Pos) /*!< Quadrature encoder phase A input of QEI Unit 0. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD11MFP_INT6 (0x0FUL<<SYS_GPD_MFPH_PD11MFP_Pos) /*!< External interrupt6 input pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD12MFP_GPIO (0x00UL<<SYS_GPD_MFPH_PD12MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD12MFP_OPA2_O (0x01UL<<SYS_GPD_MFPH_PD12MFP_Pos) /*!< Operational amplifier output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD12MFP_EADC1_CH2 (0x01UL<<SYS_GPD_MFPH_PD12MFP_Pos) /*!< EADC1 channel2 analog input. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD12MFP_EBI_nCS0 (0x02UL<<SYS_GPD_MFPH_PD12MFP_Pos) /*!< EBI chip select enable output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD12MFP_CAN1_RXD (0x05UL<<SYS_GPD_MFPH_PD12MFP_Pos) /*!< CAN1 bus receiver input. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD12MFP_UART2_RXD (0x07UL<<SYS_GPD_MFPH_PD12MFP_Pos) /*!< Data receiver input pin for UART2. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD12MFP_BPWM0_CH5 (0x09UL<<SYS_GPD_MFPH_PD12MFP_Pos) /*!< BPWM0 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD12MFP_QEI0_INDEX (0x0AUL<<SYS_GPD_MFPH_PD12MFP_Pos) /*!< Quadrature encoder index input of QEI Unit 0. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD12MFP_CLKO (0x0DUL<<SYS_GPD_MFPH_PD12MFP_Pos) /*!< Clock Output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD12MFP_EADC0_ST (0x0EUL<<SYS_GPD_MFPH_PD12MFP_Pos) /*!< EADC external trigger input. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD12MFP_INT5 (0x0FUL<<SYS_GPD_MFPH_PD12MFP_Pos) /*!< External interrupt5 input pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD13MFP_GPIO (0x00UL<<SYS_GPD_MFPH_PD13MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD13MFP_EBI_AD10 (0x02UL<<SYS_GPD_MFPH_PD13MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD13MFP_SD0_nCD (0x03UL<<SYS_GPD_MFPH_PD13MFP_Pos) /*!< SD/SDIO 0 card detect \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD13MFP_SPI0_I2SMCLK (0x04UL<<SYS_GPD_MFPH_PD13MFP_Pos) /*!< SPI0 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD13MFP_SPI1_I2SMCLK (0x05UL<<SYS_GPD_MFPH_PD13MFP_Pos) /*!< SPI1 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD13MFP_SC2_nCD (0x07UL<<SYS_GPD_MFPH_PD13MFP_Pos) /*!< SmartCard2 card detect pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD14MFP_GPIO (0x00UL<<SYS_GPD_MFPH_PD14MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD14MFP_EBI_nCS0 (0x02UL<<SYS_GPD_MFPH_PD14MFP_Pos) /*!< EBI chip select enable output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD14MFP_SPI3_I2SMCLK (0x03UL<<SYS_GPD_MFPH_PD14MFP_Pos) /*!< SPI3 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD14MFP_SC1_nCD (0x04UL<<SYS_GPD_MFPH_PD14MFP_Pos) /*!< SmartCard1 card detect pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD14MFP_SPI0_I2SMCLK (0x05UL<<SYS_GPD_MFPH_PD14MFP_Pos) /*!< SPI0 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPD_MFPH_PD14MFP_EPWM0_CH4 (0x0BUL<<SYS_GPD_MFPH_PD14MFP_Pos) /*!< EPWM0 channel4 output/capture input. \hideinitializer */
|
|
/********************* Bit definition of GPE_MFPL register **********************/
|
|
#define SYS_GPE_MFPL_PE0MFP_GPIO (0x00UL<<SYS_GPE_MFPL_PE0MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE0MFP_EBI_AD11 (0x02UL<<SYS_GPE_MFPL_PE0MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE0MFP_QSPI0_MOSI0 (0x03UL<<SYS_GPE_MFPL_PE0MFP_Pos) /*!< 1st QSPI0 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE0MFP_SC2_CLK (0x04UL<<SYS_GPE_MFPL_PE0MFP_Pos) /*!< SmartCard2 clock pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE0MFP_I2S0_MCLK (0x05UL<<SYS_GPE_MFPL_PE0MFP_Pos) /*!< I2S0 master clock output pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE0MFP_SPI1_MOSI (0x06UL<<SYS_GPE_MFPL_PE0MFP_Pos) /*!< 1st SPI1 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE0MFP_UART3_RXD (0x07UL<<SYS_GPE_MFPL_PE0MFP_Pos) /*!< Data receiver input pin for UART3. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE0MFP_I2C1_SDA (0x08UL<<SYS_GPE_MFPL_PE0MFP_Pos) /*!< I2C1 data input/output pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE0MFP_UART4_nRTS (0x09UL<<SYS_GPE_MFPL_PE0MFP_Pos) /*!< Request to Send output pin for UART4. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE1MFP_GPIO (0x00UL<<SYS_GPE_MFPL_PE1MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE1MFP_EBI_AD10 (0x02UL<<SYS_GPE_MFPL_PE1MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE1MFP_QSPI0_MISO0 (0x03UL<<SYS_GPE_MFPL_PE1MFP_Pos) /*!< 1st QSPI0 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE1MFP_SC2_DAT (0x04UL<<SYS_GPE_MFPL_PE1MFP_Pos) /*!< SmartCard2 data pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE1MFP_I2S0_BCLK (0x05UL<<SYS_GPE_MFPL_PE1MFP_Pos) /*!< I2S0 bit clock pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE1MFP_SPI1_MISO (0x06UL<<SYS_GPE_MFPL_PE1MFP_Pos) /*!< 1st SPI1 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE1MFP_UART3_TXD (0x07UL<<SYS_GPE_MFPL_PE1MFP_Pos) /*!< Data transmitter output pin for UART3. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE1MFP_I2C1_SCL (0x08UL<<SYS_GPE_MFPL_PE1MFP_Pos) /*!< I2C1 clock pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE1MFP_UART4_nCTS (0x09UL<<SYS_GPE_MFPL_PE1MFP_Pos) /*!< Clear to Send input pin for UART4. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_GPIO (0x00UL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_EBI_ALE (0x02UL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< EBI address latch enable output pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_SD0_DAT0 (0x03UL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< SD/SDIO 0 data line bit 0. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_SPIM_MOSI (0x04UL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< 1st SPIM MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_SPI3_MOSI (0x05UL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< 1st SPI3 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_SC0_CLK (0x06UL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< SmartCard0 clock pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_USCI0_CLK (0x07UL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< USCI0 clock pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_UART6_nCTS (0x08UL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< Clear to Send input pin for UART6. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_UART7_RXD (0x09UL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< Data receiver input pin for UART7. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_QEI0_B (0x0BUL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< Quadrature encoder phase B input of QEI Unit 0. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_EPWM0_CH5 (0x0CUL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< EPWM0 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE2MFP_BPWM0_CH0 (0x0DUL<<SYS_GPE_MFPL_PE2MFP_Pos) /*!< BPWM0 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_GPIO (0x00UL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_EBI_MCLK (0x02UL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< EBI external clock output pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_SD0_DAT1 (0x03UL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< SD/SDIO 0 data line bit 1. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_SPIM_MISO (0x04UL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< 1st SPIM MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_SPI3_MISO (0x05UL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< 1st SPI3 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_SC0_DAT (0x06UL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< SmartCard0 data pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_USCI0_DAT0 (0x07UL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< USCI0 data0 pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_UART6_nRTS (0x08UL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< Request to Send output pin for UART6. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_UART7_TXD (0x09UL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< Data transmitter output pin for UART7. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_QEI0_A (0x0BUL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< Quadrature encoder phase A input of QEI Unit 0. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_EPWM0_CH4 (0x0CUL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< EPWM0 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE3MFP_BPWM0_CH1 (0x0DUL<<SYS_GPE_MFPL_PE3MFP_Pos) /*!< BPWM0 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_GPIO (0x00UL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_EBI_nWR (0x02UL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< EBI write enable output pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_SD0_DAT2 (0x03UL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< SD/SDIO 0 data line bit 2. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_SPIM_CLK (0x04UL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< SPIM serial clock pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_SPI3_CLK (0x05UL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< SPI3 serial clock pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_SC0_RST (0x06UL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< SmartCard0 reset pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_USCI0_DAT1 (0x07UL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< USCI0 data1 pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_UART6_RXD (0x08UL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< Data receiver input pin for UART6. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_UART7_nCTS (0x09UL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< Clear to Send input pin for UART7. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_QEI0_INDEX (0x0BUL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< Quadrature encoder index input of QEI Unit 0. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_EPWM0_CH3 (0x0CUL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< EPWM0 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE4MFP_BPWM0_CH2 (0x0DUL<<SYS_GPE_MFPL_PE4MFP_Pos) /*!< BPWM0 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_GPIO (0x00UL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_EBI_nRD (0x02UL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< EBI read enable output pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_SD0_DAT3 (0x03UL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< SD/SDIO 0 data line bit 3. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_SPIM_SS (0x04UL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< 1st SPIM slave select pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_SPI3_SS (0x05UL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< 1st SPI3 slave select pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_SC0_PWR (0x06UL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< SmartCard0 power pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_USCI0_CTL1 (0x07UL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< USCI0 control1 pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_UART6_TXD (0x08UL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< Data transmitter output pin for UART6. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_UART7_nRTS (0x09UL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< Request to Send output pin for UART7. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_QEI1_B (0x0BUL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< Quadrature encoder phase B input of QEI Unit 1. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_EPWM0_CH2 (0x0CUL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< EPWM0 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE5MFP_BPWM0_CH3 (0x0DUL<<SYS_GPE_MFPL_PE5MFP_Pos) /*!< BPWM0 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE6MFP_GPIO (0x00UL<<SYS_GPE_MFPL_PE6MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE6MFP_SD0_CLK (0x03UL<<SYS_GPE_MFPL_PE6MFP_Pos) /*!< SD/SDIO 0 clock. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE6MFP_SPIM_D3 (0x04UL<<SYS_GPE_MFPL_PE6MFP_Pos) /*!< SPIM data 3 pin for Quad Mode I/O. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE6MFP_SPI3_I2SMCLK (0x05UL<<SYS_GPE_MFPL_PE6MFP_Pos) /*!< SPI3 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE6MFP_SC0_nCD (0x06UL<<SYS_GPE_MFPL_PE6MFP_Pos) /*!< SmartCard0 card detect pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE6MFP_USCI0_CTL0 (0x07UL<<SYS_GPE_MFPL_PE6MFP_Pos) /*!< USCI0 control0 pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE6MFP_UART5_RXD (0x08UL<<SYS_GPE_MFPL_PE6MFP_Pos) /*!< Data receiver input pin for UART5. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE6MFP_CAN1_RXD (0x09UL<<SYS_GPE_MFPL_PE6MFP_Pos) /*!< CAN1 bus receiver input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE6MFP_QEI1_A (0x0BUL<<SYS_GPE_MFPL_PE6MFP_Pos) /*!< Quadrature encoder phase A input of QEI Unit 1. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE6MFP_EPWM0_CH1 (0x0CUL<<SYS_GPE_MFPL_PE6MFP_Pos) /*!< EPWM0 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE6MFP_BPWM0_CH4 (0x0DUL<<SYS_GPE_MFPL_PE6MFP_Pos) /*!< BPWM0 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE7MFP_GPIO (0x00UL<<SYS_GPE_MFPL_PE7MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE7MFP_SD0_CMD (0x03UL<<SYS_GPE_MFPL_PE7MFP_Pos) /*!< SD/SDIO 0 command/response. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE7MFP_SPIM_D2 (0x04UL<<SYS_GPE_MFPL_PE7MFP_Pos) /*!< SPIM data 2 pin for Quad Mode I/O. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE7MFP_UART5_TXD (0x08UL<<SYS_GPE_MFPL_PE7MFP_Pos) /*!< Data transmitter output pin for UART5. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE7MFP_CAN1_TXD (0x09UL<<SYS_GPE_MFPL_PE7MFP_Pos) /*!< CAN1 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE7MFP_QEI1_INDEX (0x0BUL<<SYS_GPE_MFPL_PE7MFP_Pos) /*!< Quadrature encoder index input of QEI Unit 1. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE7MFP_EPWM0_CH0 (0x0CUL<<SYS_GPE_MFPL_PE7MFP_Pos) /*!< EPWM0 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPL_PE7MFP_BPWM0_CH5 (0x0DUL<<SYS_GPE_MFPL_PE7MFP_Pos) /*!< BPWM0 channel5 output/capture input. \hideinitializer */
|
|
/********************* Bit definition of GPE_MFPH register **********************/
|
|
#define SYS_GPE_MFPH_PE8MFP_GPIO (0x00UL<<SYS_GPE_MFPH_PE8MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE8MFP_EBI_ADR10 (0x02UL<<SYS_GPE_MFPH_PE8MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE8MFP_EMAC_RMII_MDC (0x03UL<<SYS_GPE_MFPH_PE8MFP_Pos) /*!< RMII Management Data Clock. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE8MFP_I2S0_BCLK (0x04UL<<SYS_GPE_MFPH_PE8MFP_Pos) /*!< I2S0 bit clock pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE8MFP_SPI2_CLK (0x05UL<<SYS_GPE_MFPH_PE8MFP_Pos) /*!< SPI2 serial clock pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE8MFP_USCI1_CTL1 (0x06UL<<SYS_GPE_MFPH_PE8MFP_Pos) /*!< USCI1 control1 pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE8MFP_UART2_TXD (0x07UL<<SYS_GPE_MFPH_PE8MFP_Pos) /*!< Data transmitter output pin for UART2. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE8MFP_EPWM0_CH0 (0x0AUL<<SYS_GPE_MFPH_PE8MFP_Pos) /*!< EPWM0 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE8MFP_EPWM0_BRAKE0 (0x0BUL<<SYS_GPE_MFPH_PE8MFP_Pos) /*!< Brake input pin 0 of EPWM0. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE8MFP_ECAP0_IC0 (0x0CUL<<SYS_GPE_MFPH_PE8MFP_Pos) /*!< Input 0 of enhanced capture unit 0. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE8MFP_TRACE_DATA3 (0x0EUL<<SYS_GPE_MFPH_PE8MFP_Pos) /*!< ETM Rx input bus bit3. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE9MFP_GPIO (0x00UL<<SYS_GPE_MFPH_PE9MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE9MFP_EBI_ADR11 (0x02UL<<SYS_GPE_MFPH_PE9MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE9MFP_EMAC_RMII_MDIO (0x03UL<<SYS_GPE_MFPH_PE9MFP_Pos) /*!< RMII Management Data I/O. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE9MFP_I2S0_MCLK (0x04UL<<SYS_GPE_MFPH_PE9MFP_Pos) /*!< I2S0 master clock output pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE9MFP_SPI2_MISO (0x05UL<<SYS_GPE_MFPH_PE9MFP_Pos) /*!< 1st SPI2 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE9MFP_USCI1_CTL0 (0x06UL<<SYS_GPE_MFPH_PE9MFP_Pos) /*!< USCI1 control0 pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE9MFP_UART2_RXD (0x07UL<<SYS_GPE_MFPH_PE9MFP_Pos) /*!< Data receiver input pin for UART2. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE9MFP_EPWM0_CH1 (0x0AUL<<SYS_GPE_MFPH_PE9MFP_Pos) /*!< EPWM0 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE9MFP_EPWM0_BRAKE1 (0x0BUL<<SYS_GPE_MFPH_PE9MFP_Pos) /*!< Brake input pin 1 of EPWM0. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE9MFP_ECAP0_IC1 (0x0CUL<<SYS_GPE_MFPH_PE9MFP_Pos) /*!< Input 1 of enhanced capture unit 0. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE9MFP_TRACE_DATA2 (0x0EUL<<SYS_GPE_MFPH_PE9MFP_Pos) /*!< ETM Rx input bus bit2. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE10MFP_GPIO (0x00UL<<SYS_GPE_MFPH_PE10MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE10MFP_EBI_ADR12 (0x02UL<<SYS_GPE_MFPH_PE10MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE10MFP_EMAC_RMII_TXD0 (0x03UL<<SYS_GPE_MFPH_PE10MFP_Pos) /*!< RMII Transmit Data bus bit 0. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE10MFP_I2S0_DI (0x04UL<<SYS_GPE_MFPH_PE10MFP_Pos) /*!< I2S0 data input. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE10MFP_SPI2_MOSI (0x05UL<<SYS_GPE_MFPH_PE10MFP_Pos) /*!< 1st SPI2 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE10MFP_USCI1_DAT0 (0x06UL<<SYS_GPE_MFPH_PE10MFP_Pos) /*!< USCI1 data0 pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE10MFP_UART3_TXD (0x07UL<<SYS_GPE_MFPH_PE10MFP_Pos) /*!< Data transmitter output pin for UART3. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE10MFP_EPWM0_CH2 (0x0AUL<<SYS_GPE_MFPH_PE10MFP_Pos) /*!< EPWM0 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE10MFP_EPWM1_BRAKE0 (0x0BUL<<SYS_GPE_MFPH_PE10MFP_Pos) /*!< Brake input pin 0 of EPWM1. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE10MFP_ECAP0_IC2 (0x0CUL<<SYS_GPE_MFPH_PE10MFP_Pos) /*!< Input 0 of enhanced capture unit 2. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE10MFP_TRACE_DATA1 (0x0EUL<<SYS_GPE_MFPH_PE10MFP_Pos) /*!< ETM Rx input bus bit1. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_GPIO (0x00UL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_EBI_ADR13 (0x02UL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_EMAC_RMII_TXD1 (0x03UL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< RMII Transmit Data bus bit 1. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_I2S0_DO (0x04UL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< I2S0 data output. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_SPI2_SS (0x05UL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< 1st SPI2 slave select pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_USCI1_DAT1 (0x06UL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< USCI1 data1 pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_UART3_RXD (0x07UL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< Data receiver input pin for UART3. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_UART1_nCTS (0x08UL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< Clear to Send input pin for UART1. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_EPWM0_CH3 (0x0AUL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< EPWM0 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_EPWM1_BRAKE1 (0x0BUL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< Brake input pin 1 of EPWM1. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_ECAP1_IC2 (0x0DUL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< Input 1 of enhanced capture unit 2. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE11MFP_TRACE_DATA0 (0x0EUL<<SYS_GPE_MFPH_PE11MFP_Pos) /*!< ETM Rx input bus bit0. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE12MFP_GPIO (0x00UL<<SYS_GPE_MFPH_PE12MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE12MFP_EBI_ADR14 (0x02UL<<SYS_GPE_MFPH_PE12MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE12MFP_EMAC_RMII_TXEN (0x03UL<<SYS_GPE_MFPH_PE12MFP_Pos) /*!< RMII? Transmit Enable. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE12MFP_I2S0_LRCK (0x04UL<<SYS_GPE_MFPH_PE12MFP_Pos) /*!< I2S0 left right channel clock. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE12MFP_SPI2_I2SMCLK (0x05UL<<SYS_GPE_MFPH_PE12MFP_Pos) /*!< SPI2 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE12MFP_USCI1_CLK (0x06UL<<SYS_GPE_MFPH_PE12MFP_Pos) /*!< USCI1 clock pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE12MFP_UART1_nRTS (0x08UL<<SYS_GPE_MFPH_PE12MFP_Pos) /*!< Request to Send output pin for UART1. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE12MFP_EPWM0_CH4 (0x0AUL<<SYS_GPE_MFPH_PE12MFP_Pos) /*!< EPWM0 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE12MFP_ECAP1_IC1 (0x0DUL<<SYS_GPE_MFPH_PE12MFP_Pos) /*!< Input 1 of enhanced capture unit 1. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE12MFP_TRACE_CLK (0x0EUL<<SYS_GPE_MFPH_PE12MFP_Pos) /*!< ETM Rx clock input pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE13MFP_GPIO (0x00UL<<SYS_GPE_MFPH_PE13MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE13MFP_EBI_ADR15 (0x02UL<<SYS_GPE_MFPH_PE13MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE13MFP_EMAC_PPS (0x03UL<<SYS_GPE_MFPH_PE13MFP_Pos) /*!< EMAC Pulse Per Second output \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE13MFP_I2C0_SCL (0x04UL<<SYS_GPE_MFPH_PE13MFP_Pos) /*!< I2C0 clock pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE13MFP_UART4_nRTS (0x05UL<<SYS_GPE_MFPH_PE13MFP_Pos) /*!< Request to Send output pin for UART4. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE13MFP_UART1_TXD (0x08UL<<SYS_GPE_MFPH_PE13MFP_Pos) /*!< Data transmitter output pin for UART1. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE13MFP_EPWM0_CH5 (0x0AUL<<SYS_GPE_MFPH_PE13MFP_Pos) /*!< EPWM0 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE13MFP_EPWM1_CH0 (0x0BUL<<SYS_GPE_MFPH_PE13MFP_Pos) /*!< EPWM1 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE13MFP_BPWM1_CH5 (0x0CUL<<SYS_GPE_MFPH_PE13MFP_Pos) /*!< BPWM1 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE13MFP_ECAP1_IC0 (0x0DUL<<SYS_GPE_MFPH_PE13MFP_Pos) /*!< Input 0 of enhanced capture unit 1. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE14MFP_GPIO (0x00UL<<SYS_GPE_MFPH_PE14MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE14MFP_EBI_AD8 (0x02UL<<SYS_GPE_MFPH_PE14MFP_Pos) /*!< EBI address/data bus bit8. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE14MFP_UART2_TXD (0x03UL<<SYS_GPE_MFPH_PE14MFP_Pos) /*!< Data transmitter output pin for UART2. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE14MFP_CAN0_TXD (0x04UL<<SYS_GPE_MFPH_PE14MFP_Pos) /*!< CAN0 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE14MFP_SD1_nCD (0x05UL<<SYS_GPE_MFPH_PE14MFP_Pos) /*!< SD/SDIO 1 card detect \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE14MFP_UART6_TXD (0x06UL<<SYS_GPE_MFPH_PE14MFP_Pos) /*!< Data transmitter output pin for UART6. */
|
|
#define SYS_GPE_MFPH_PE15MFP_GPIO (0x00UL<<SYS_GPE_MFPH_PE15MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE15MFP_EBI_AD9 (0x02UL<<SYS_GPE_MFPH_PE15MFP_Pos) /*!< EBI address/data bus bit9. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE15MFP_UART2_RXD (0x03UL<<SYS_GPE_MFPH_PE15MFP_Pos) /*!< Data receiver input pin for UART2. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE15MFP_CAN0_RXD (0x04UL<<SYS_GPE_MFPH_PE15MFP_Pos) /*!< CAN0 bus receiver input. \hideinitializer */
|
|
#define SYS_GPE_MFPH_PE15MFP_UART6_RXD (0x06UL<<SYS_GPE_MFPH_PE15MFP_Pos) /*!< Data receiver input pin for UART6. \hideinitializer */
|
|
/********************* Bit definition of GPF_MFPL register **********************/
|
|
#define SYS_GPF_MFPL_PF0MFP_GPIO (0x00UL<<SYS_GPF_MFPL_PF0MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF0MFP_UART1_TXD (0x02UL<<SYS_GPF_MFPL_PF0MFP_Pos) /*!< Data transmitter output pin for UART1. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF0MFP_I2C1_SCL (0x03UL<<SYS_GPF_MFPL_PF0MFP_Pos) /*!< I2C1 clock pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF0MFP_UART0_TXD (0x04UL<<SYS_GPF_MFPL_PF0MFP_Pos) /*!< Data transmitter output pin for UART0. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF0MFP_BPWM1_CH0 (0x0CUL<<SYS_GPF_MFPL_PF0MFP_Pos) /*!< BPWM1 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF0MFP_ICE_DAT (0x0EUL<<SYS_GPF_MFPL_PF0MFP_Pos) /*!< Serial wired debugger data pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF1MFP_GPIO (0x00UL<<SYS_GPF_MFPL_PF1MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF1MFP_UART1_RXD (0x02UL<<SYS_GPF_MFPL_PF1MFP_Pos) /*!< Data receiver input pin for UART1. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF1MFP_I2C1_SDA (0x03UL<<SYS_GPF_MFPL_PF1MFP_Pos) /*!< I2C1 data input/output pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF1MFP_UART0_RXD (0x04UL<<SYS_GPF_MFPL_PF1MFP_Pos) /*!< Data receiver input pin for UART0. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF1MFP_BPWM1_CH1 (0x0CUL<<SYS_GPF_MFPL_PF1MFP_Pos) /*!< BPWM1 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF1MFP_ICE_CLK (0x0EUL<<SYS_GPF_MFPL_PF1MFP_Pos) /*!< Serial wired debugger clock pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF2MFP_GPIO (0x00UL<<SYS_GPF_MFPL_PF2MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF2MFP_EBI_nCS1 (0x02UL<<SYS_GPF_MFPL_PF2MFP_Pos) /*!< EBI chip select enable output pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF2MFP_UART0_RXD (0x03UL<<SYS_GPF_MFPL_PF2MFP_Pos) /*!< Data receiver input pin for UART0. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF2MFP_I2C0_SDA (0x04UL<<SYS_GPF_MFPL_PF2MFP_Pos) /*!< I2C0 data input/output pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF2MFP_QSPI0_CLK (0x05UL<<SYS_GPF_MFPL_PF2MFP_Pos) /*!< QSPI0 serial clock pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF2MFP_XT1_OUT (0x0AUL<<SYS_GPF_MFPL_PF2MFP_Pos) /*!< External 4~24 MHz (high speed) crystal output pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF2MFP_BPWM1_CH1 (0x0BUL<<SYS_GPF_MFPL_PF2MFP_Pos) /*!< BPWM1 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF3MFP_GPIO (0x00UL<<SYS_GPF_MFPL_PF3MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF3MFP_EBI_nCS0 (0x02UL<<SYS_GPF_MFPL_PF3MFP_Pos) /*!< EBI chip select enable output pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF3MFP_UART0_TXD (0x03UL<<SYS_GPF_MFPL_PF3MFP_Pos) /*!< Data transmitter output pin for UART0. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF3MFP_I2C0_SCL (0x04UL<<SYS_GPF_MFPL_PF3MFP_Pos) /*!< I2C0 clock pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF3MFP_XT1_IN (0x0AUL<<SYS_GPF_MFPL_PF3MFP_Pos) /*!< External 4~24 MHz (high speed) crystal input pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF3MFP_BPWM1_CH0 (0x0BUL<<SYS_GPF_MFPL_PF3MFP_Pos) /*!< BPWM1 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF4MFP_GPIO (0x00UL<<SYS_GPF_MFPL_PF4MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF4MFP_UART2_TXD (0x02UL<<SYS_GPF_MFPL_PF4MFP_Pos) /*!< Data transmitter output pin for UART2. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF4MFP_UART2_nRTS (0x04UL<<SYS_GPF_MFPL_PF4MFP_Pos) /*!< Request to Send output pin for UART2. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF4MFP_EPWM0_CH1 (0x07UL<<SYS_GPF_MFPL_PF4MFP_Pos) /*!< EPWM0 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF4MFP_BPWM0_CH5 (0x08UL<<SYS_GPF_MFPL_PF4MFP_Pos) /*!< BPWM0 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF4MFP_X32_OUT (0x0AUL<<SYS_GPF_MFPL_PF4MFP_Pos) /*!< External 32.768 kHz (low speed) crystal output pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF4MFP_EADC1_ST (0x0BUL<<SYS_GPF_MFPL_PF4MFP_Pos) /*!< EADC external trigger input. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF5MFP_GPIO (0x00UL<<SYS_GPF_MFPL_PF5MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF5MFP_UART2_RXD (0x02UL<<SYS_GPF_MFPL_PF5MFP_Pos) /*!< Data receiver input pin for UART2. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF5MFP_UART2_nCTS (0x04UL<<SYS_GPF_MFPL_PF5MFP_Pos) /*!< Clear to Send input pin for UART2. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF5MFP_EPWM0_CH0 (0x07UL<<SYS_GPF_MFPL_PF5MFP_Pos) /*!< EPWM0 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF5MFP_BPWM0_CH4 (0x08UL<<SYS_GPF_MFPL_PF5MFP_Pos) /*!< BPWM0 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF5MFP_EPWM0_SYNC_OUT (0x09UL<<SYS_GPF_MFPL_PF5MFP_Pos) /*!< EPWM0 counter synchronous trigger output pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF5MFP_X32_IN (0x0AUL<<SYS_GPF_MFPL_PF5MFP_Pos) /*!< External 32.768 kHz (low speed) crystal input pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF5MFP_EADC0_ST (0x0BUL<<SYS_GPF_MFPL_PF5MFP_Pos) /*!< EADC external trigger input. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF6MFP_GPIO (0x00UL<<SYS_GPF_MFPL_PF6MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF6MFP_EBI_ADR19 (0x02UL<<SYS_GPF_MFPL_PF6MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF6MFP_SC0_CLK (0x03UL<<SYS_GPF_MFPL_PF6MFP_Pos) /*!< SmartCard0 clock pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF6MFP_I2S0_LRCK (0x04UL<<SYS_GPF_MFPL_PF6MFP_Pos) /*!< I2S0 left right channel clock. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF6MFP_SPI0_MOSI (0x05UL<<SYS_GPF_MFPL_PF6MFP_Pos) /*!< 1st SPI0 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF6MFP_UART4_RXD (0x06UL<<SYS_GPF_MFPL_PF6MFP_Pos) /*!< Data receiver input pin for UART4. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF6MFP_EBI_nCS0 (0x07UL<<SYS_GPF_MFPL_PF6MFP_Pos) /*!< EBI chip select enable output pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF6MFP_CAN2_RXD (0x08UL<<SYS_GPF_MFPL_PF6MFP_Pos) /*!< CAN2 bus receiver input. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF6MFP_TAMPER0 (0x0AUL<<SYS_GPF_MFPL_PF6MFP_Pos) /*!< TAMPER detector loop pin0. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF7MFP_GPIO (0x00UL<<SYS_GPF_MFPL_PF7MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF7MFP_EBI_ADR18 (0x02UL<<SYS_GPF_MFPL_PF7MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF7MFP_SC0_DAT (0x03UL<<SYS_GPF_MFPL_PF7MFP_Pos) /*!< SmartCard0 data pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF7MFP_I2S0_DO (0x04UL<<SYS_GPF_MFPL_PF7MFP_Pos) /*!< I2S0 data output. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF7MFP_SPI0_MISO (0x05UL<<SYS_GPF_MFPL_PF7MFP_Pos) /*!< 1st SPI0 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF7MFP_UART4_TXD (0x06UL<<SYS_GPF_MFPL_PF7MFP_Pos) /*!< Data transmitter output pin for UART4. \hideinitializer */
|
|
#define SYS_GPF_MFPL_PF7MFP_CCAP_DATA0 (0x07UL<<SYS_GPF_MFPL_PF7MFP_Pos) /*!< Sensor pixel data0 input pin. */
|
|
#define SYS_GPF_MFPL_PF7MFP_CAN2_TXD (0x08UL<<SYS_GPF_MFPL_PF7MFP_Pos) /*!< CAN2 bus transmitter output. */
|
|
#define SYS_GPF_MFPL_PF7MFP_TAMPER1 (0x0AUL<<SYS_GPF_MFPL_PF7MFP_Pos) /*!< TAMPER detector loop pin1. \hideinitializer */
|
|
/********************* Bit definition of GPF_MFPH register **********************/
|
|
#define SYS_GPF_MFPH_PF8MFP_GPIO (0x00UL<<SYS_GPF_MFPH_PF8MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF8MFP_EBI_ADR17 (0x02UL<<SYS_GPF_MFPH_PF8MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF8MFP_SC0_RST (0x03UL<<SYS_GPF_MFPH_PF8MFP_Pos) /*!< SmartCard0 reset pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF8MFP_I2S0_DI (0x04UL<<SYS_GPF_MFPH_PF8MFP_Pos) /*!< I2S0 data input. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF8MFP_SPI0_CLK (0x05UL<<SYS_GPF_MFPH_PF8MFP_Pos) /*!< SPI0 serial clock pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF8MFP_UART5_nCTS (0x06UL<<SYS_GPF_MFPH_PF8MFP_Pos) /*!< Clear to Send input pin for UART5. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF8MFP_CCAP_DATA1 (0x07UL<<SYS_GPF_MFPH_PF8MFP_Pos) /*!< Sensor pixel data1 input pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF8MFP_CAN1_RXD (0x08UL<<SYS_GPF_MFPH_PF8MFP_Pos) /*!< CAN1 bus receiver input. */
|
|
#define SYS_GPF_MFPH_PF8MFP_TAMPER2 (0x0AUL<<SYS_GPF_MFPH_PF8MFP_Pos) /*!< TAMPER detector loop pin2. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF9MFP_GPIO (0x00UL<<SYS_GPF_MFPH_PF9MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF9MFP_EBI_ADR16 (0x02UL<<SYS_GPF_MFPH_PF9MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF9MFP_SC0_PWR (0x03UL<<SYS_GPF_MFPH_PF9MFP_Pos) /*!< SmartCard0 power pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF9MFP_I2S0_MCLK (0x04UL<<SYS_GPF_MFPH_PF9MFP_Pos) /*!< I2S0 master clock output pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF9MFP_SPI0_SS (0x05UL<<SYS_GPF_MFPH_PF9MFP_Pos) /*!< 1st SPI0 slave select pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF9MFP_UART5_nRTS (0x06UL<<SYS_GPF_MFPH_PF9MFP_Pos) /*!< Request to Send output pin for UART5. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF9MFP_CCAP_DATA2 (0x07UL<<SYS_GPF_MFPH_PF9MFP_Pos) /*!< Sensor pixel data2 input pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF9MFP_CAN1_TXD (0x08UL<<SYS_GPF_MFPH_PF9MFP_Pos) /*!< CAN1 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF9MFP_TAMPER3 (0x0AUL<<SYS_GPF_MFPH_PF9MFP_Pos) /*!< TAMPER detector loop pin3. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF10MFP_GPIO (0x00UL<<SYS_GPF_MFPH_PF10MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF10MFP_EBI_ADR15 (0x02UL<<SYS_GPF_MFPH_PF10MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF10MFP_SC0_nCD (0x03UL<<SYS_GPF_MFPH_PF10MFP_Pos) /*!< SmartCard0 card detect pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF10MFP_I2S0_BCLK (0x04UL<<SYS_GPF_MFPH_PF10MFP_Pos) /*!< I2S0 bit clock pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF10MFP_SPI0_I2SMCLK (0x05UL<<SYS_GPF_MFPH_PF10MFP_Pos) /*!< SPI0 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF10MFP_UART5_RXD (0x06UL<<SYS_GPF_MFPH_PF10MFP_Pos) /*!< Data receiver input pin for UART5. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF10MFP_CCAP_DATA3 (0x07UL<<SYS_GPF_MFPH_PF10MFP_Pos) /*!< Sensor pixel data3 input pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF10MFP_TAMPER4 (0x0AUL<<SYS_GPF_MFPH_PF10MFP_Pos) /*!< TAMPER detector loop pin4. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF11MFP_GPIO (0x00UL<<SYS_GPF_MFPH_PF11MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF11MFP_EBI_ADR14 (0x02UL<<SYS_GPF_MFPH_PF11MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF11MFP_SPI2_MOSI (0x03UL<<SYS_GPF_MFPH_PF11MFP_Pos) /*!< 1st SPI2 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF11MFP_UART5_TXD (0x06UL<<SYS_GPF_MFPH_PF11MFP_Pos) /*!< Data transmitter output pin for UART5. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF11MFP_CCAP_DATA4 (0x07UL<<SYS_GPF_MFPH_PF11MFP_Pos) /*!< Sensor pixel data4 input pin. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF11MFP_TAMPER5 (0x0AUL<<SYS_GPF_MFPH_PF11MFP_Pos) /*!< TAMPER detector loop pin5. \hideinitializer */
|
|
#define SYS_GPF_MFPH_PF11MFP_TM3 (0x0DUL<<SYS_GPF_MFPH_PF11MFP_Pos) /*!< Timer3 event counter input / toggle output \hideinitializer */
|
|
/********************* Bit definition of GPG_MFPL register **********************/
|
|
#define SYS_GPG_MFPL_PG0MFP_GPIO (0x00UL<<SYS_GPG_MFPL_PG0MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG0MFP_EBI_ADR8 (0x02UL<<SYS_GPG_MFPL_PG0MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG0MFP_I2C0_SCL (0x04UL<<SYS_GPG_MFPL_PG0MFP_Pos) /*!< I2C0 clock pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG0MFP_I2C1_SMBAL (0x05UL<<SYS_GPG_MFPL_PG0MFP_Pos) /*!< I2C1 SMBus SMBALTER# pin \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG0MFP_UART2_RXD (0x06UL<<SYS_GPG_MFPL_PG0MFP_Pos) /*!< Data receiver input pin for UART2. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG0MFP_CAN1_TXD (0x07UL<<SYS_GPG_MFPL_PG0MFP_Pos) /*!< CAN1 bus transmitter output. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG0MFP_UART1_TXD (0x08UL<<SYS_GPG_MFPL_PG0MFP_Pos) /*!< Data transmitter output pin for UART1. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG1MFP_GPIO (0x00UL<<SYS_GPG_MFPL_PG1MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG1MFP_EBI_ADR9 (0x02UL<<SYS_GPG_MFPL_PG1MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG1MFP_SPI2_I2SMCLK (0x03UL<<SYS_GPG_MFPL_PG1MFP_Pos) /*!< SPI2 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG1MFP_I2C0_SDA (0x04UL<<SYS_GPG_MFPL_PG1MFP_Pos) /*!< I2C0 data input/output pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG1MFP_I2C1_SMBSUS (0x05UL<<SYS_GPG_MFPL_PG1MFP_Pos) /*!< I2C1 SMBus SMBSUS# pin (PMBus CONTROL pin) \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG1MFP_UART2_TXD (0x06UL<<SYS_GPG_MFPL_PG1MFP_Pos) /*!< Data transmitter output pin for UART2. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG1MFP_CAN1_RXD (0x07UL<<SYS_GPG_MFPL_PG1MFP_Pos) /*!< CAN1 bus receiver input. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG1MFP_UART1_RXD (0x08UL<<SYS_GPG_MFPL_PG1MFP_Pos) /*!< Data receiver input pin for UART1. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG2MFP_GPIO (0x00UL<<SYS_GPG_MFPL_PG2MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG2MFP_EBI_ADR11 (0x02UL<<SYS_GPG_MFPL_PG2MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG2MFP_SPI2_SS (0x03UL<<SYS_GPG_MFPL_PG2MFP_Pos) /*!< 1st SPI2 slave select pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG2MFP_I2C0_SMBAL (0x04UL<<SYS_GPG_MFPL_PG2MFP_Pos) /*!< I2C0 SMBus SMBALTER# pin \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG2MFP_I2C1_SCL (0x05UL<<SYS_GPG_MFPL_PG2MFP_Pos) /*!< I2C1 clock pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG2MFP_CCAP_DATA7 (0x07UL<<SYS_GPG_MFPL_PG2MFP_Pos) /*!< Sensor pixel data7 input pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG2MFP_TM0 (0x0DUL<<SYS_GPG_MFPL_PG2MFP_Pos) /*!< Timer0 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG3MFP_GPIO (0x00UL<<SYS_GPG_MFPL_PG3MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG3MFP_EBI_ADR12 (0x02UL<<SYS_GPG_MFPL_PG3MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG3MFP_SPI2_CLK (0x03UL<<SYS_GPG_MFPL_PG3MFP_Pos) /*!< SPI2 serial clock pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG3MFP_I2C0_SMBSUS (0x04UL<<SYS_GPG_MFPL_PG3MFP_Pos) /*!< I2C0 SMBus SMBSUS# pin (PMBus CONTROL pin) \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG3MFP_I2C1_SDA (0x05UL<<SYS_GPG_MFPL_PG3MFP_Pos) /*!< I2C1 data input/output pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG3MFP_CCAP_DATA6 (0x07UL<<SYS_GPG_MFPL_PG3MFP_Pos) /*!< Sensor pixel data6 input pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG3MFP_TM1 (0x0DUL<<SYS_GPG_MFPL_PG3MFP_Pos) /*!< Timer1 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG4MFP_GPIO (0x00UL<<SYS_GPG_MFPL_PG4MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG4MFP_EBI_ADR13 (0x02UL<<SYS_GPG_MFPL_PG4MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG4MFP_SPI2_MISO (0x03UL<<SYS_GPG_MFPL_PG4MFP_Pos) /*!< 1st SPI2 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG4MFP_CCAP_DATA5 (0x07UL<<SYS_GPG_MFPL_PG4MFP_Pos) /*!< Sensor pixel data5 input pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG4MFP_TM2 (0x0DUL<<SYS_GPG_MFPL_PG4MFP_Pos) /*!< Timer2 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG5MFP_GPIO (0x00UL<<SYS_GPG_MFPL_PG5MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG5MFP_EBI_nCS1 (0x02UL<<SYS_GPG_MFPL_PG5MFP_Pos) /*!< EBI chip select enable output pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG5MFP_SPI3_SS (0x03UL<<SYS_GPG_MFPL_PG5MFP_Pos) /*!< 1st SPI3 slave select pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG5MFP_SC1_PWR (0x04UL<<SYS_GPG_MFPL_PG5MFP_Pos) /*!< SmartCard1 power pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG5MFP_EPWM0_CH3 (0x0BUL<<SYS_GPG_MFPL_PG5MFP_Pos) /*!< EPWM0 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG6MFP_GPIO (0x00UL<<SYS_GPG_MFPL_PG6MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG6MFP_EBI_nCS2 (0x02UL<<SYS_GPG_MFPL_PG6MFP_Pos) /*!< EBI chip select enable output pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG6MFP_SPI3_CLK (0x03UL<<SYS_GPG_MFPL_PG6MFP_Pos) /*!< SPI3 serial clock pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG6MFP_SC1_RST (0x04UL<<SYS_GPG_MFPL_PG6MFP_Pos) /*!< SmartCard1 reset pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG6MFP_EPWM0_CH2 (0x0BUL<<SYS_GPG_MFPL_PG6MFP_Pos) /*!< EPWM0 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG7MFP_GPIO (0x00UL<<SYS_GPG_MFPL_PG7MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG7MFP_EBI_nWRL (0x02UL<<SYS_GPG_MFPL_PG7MFP_Pos) /*!< EBI write enable output pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG7MFP_SPI3_MISO (0x03UL<<SYS_GPG_MFPL_PG7MFP_Pos) /*!< 1st SPI3 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG7MFP_SC1_DAT (0x04UL<<SYS_GPG_MFPL_PG7MFP_Pos) /*!< SmartCard1 data pin. \hideinitializer */
|
|
#define SYS_GPG_MFPL_PG7MFP_EPWM0_CH1 (0x0BUL<<SYS_GPG_MFPL_PG7MFP_Pos) /*!< EPWM0 channel1 output/capture input. \hideinitializer */
|
|
/********************* Bit definition of GPG_MFPH register **********************/
|
|
#define SYS_GPG_MFPH_PG8MFP_GPIO (0x00UL<<SYS_GPG_MFPH_PG8MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG8MFP_EBI_nWRH (0x02UL<<SYS_GPG_MFPH_PG8MFP_Pos) /*!< EBI write enable output pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG8MFP_SPI3_MOSI (0x03UL<<SYS_GPG_MFPH_PG8MFP_Pos) /*!< 1st SPI3 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG8MFP_SC1_CLK (0x04UL<<SYS_GPG_MFPH_PG8MFP_Pos) /*!< SmartCard1 clock pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG8MFP_EPWM0_CH0 (0x0BUL<<SYS_GPG_MFPH_PG8MFP_Pos) /*!< EPWM0 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG9MFP_GPIO (0x00UL<<SYS_GPG_MFPH_PG9MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG9MFP_EBI_AD0 (0x02UL<<SYS_GPG_MFPH_PG9MFP_Pos) /*!< EBI address/data bus bit0. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG9MFP_SD1_DAT3 (0x03UL<<SYS_GPG_MFPH_PG9MFP_Pos) /*!< SD/SDIO 1 data line bit 3. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG9MFP_SPIM_D2 (0x04UL<<SYS_GPG_MFPH_PG9MFP_Pos) /*!< SPIM data 2 pin for Quad Mode I/O. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG9MFP_QSPI1_MISO1 (0x05UL<<SYS_GPG_MFPH_PG9MFP_Pos) /*!< 2nd QSPI1 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG9MFP_CCAP_PIXCLK (0x07UL<<SYS_GPG_MFPH_PG9MFP_Pos) /*!< Sensor pixel clock(from sensor) input pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG9MFP_BPWM0_CH5 (0x0CUL<<SYS_GPG_MFPH_PG9MFP_Pos) /*!< BPWM0 channel5 output/capture input. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG10MFP_GPIO (0x00UL<<SYS_GPG_MFPH_PG10MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG10MFP_EBI_AD1 (0x02UL<<SYS_GPG_MFPH_PG10MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG10MFP_SD1_DAT2 (0x03UL<<SYS_GPG_MFPH_PG10MFP_Pos) /*!< SD/SDIO 1 data line bit 2. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG10MFP_SPIM_D3 (0x04UL<<SYS_GPG_MFPH_PG10MFP_Pos) /*!< SPIM data 3 pin for Quad Mode I/O. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG10MFP_QSPI1_MOSI1 (0x05UL<<SYS_GPG_MFPH_PG10MFP_Pos) /*!< 2nd QSPI1 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG10MFP_CCAP_SCLK (0x07UL<<SYS_GPG_MFPH_PG10MFP_Pos) /*!< Sensor pixel clock(to sensor) output pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG10MFP_BPWM0_CH4 (0x0CUL<<SYS_GPG_MFPH_PG10MFP_Pos) /*!< BPWM0 channel4 output/capture input. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG11MFP_GPIO (0x00UL<<SYS_GPG_MFPH_PG11MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG11MFP_EBI_AD2 (0x02UL<<SYS_GPG_MFPH_PG11MFP_Pos) /*!< EBI address/data bus bit2. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG11MFP_SD1_DAT1 (0x03UL<<SYS_GPG_MFPH_PG11MFP_Pos) /*!< SD/SDIO 1 data line bit 1. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG11MFP_SPIM_SS (0x04UL<<SYS_GPG_MFPH_PG11MFP_Pos) /*!< 1st SPIM slave select pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG11MFP_QSPI1_SS (0x05UL<<SYS_GPG_MFPH_PG11MFP_Pos) /*!< 1st QSPI1 slave select pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG11MFP_UART7_TXD (0x06UL<<SYS_GPG_MFPH_PG11MFP_Pos) /*!< Data transmitter output pin for UART7. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG11MFP_CCAP_SFIELD (0x07UL<<SYS_GPG_MFPH_PG11MFP_Pos) /*!< Even/Odd Field Flag input pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG11MFP_BPWM0_CH3 (0x0CUL<<SYS_GPG_MFPH_PG11MFP_Pos) /*!< BPWM0 channel3 output/capture input. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG12MFP_GPIO (0x00UL<<SYS_GPG_MFPH_PG12MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG12MFP_EBI_AD3 (0x02UL<<SYS_GPG_MFPH_PG12MFP_Pos) /*!< EBI address/data bus bit3. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG12MFP_SD1_DAT0 (0x03UL<<SYS_GPG_MFPH_PG12MFP_Pos) /*!< SD/SDIO 1 data line bit 0. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG12MFP_SPIM_CLK (0x04UL<<SYS_GPG_MFPH_PG12MFP_Pos) /*!< SPIM serial clock pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG12MFP_QSPI1_CLK (0x05UL<<SYS_GPG_MFPH_PG12MFP_Pos) /*!< QSPI1 serial clock pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG12MFP_UART7_RXD (0x06UL<<SYS_GPG_MFPH_PG12MFP_Pos) /*!< Data receiver input pin for UART7. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG12MFP_CCAP_VSYNC (0x07UL<<SYS_GPG_MFPH_PG12MFP_Pos) /*!< Sensor vertical synchronization input pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG12MFP_BPWM0_CH2 (0x0CUL<<SYS_GPG_MFPH_PG12MFP_Pos) /*!< BPWM0 channel2 output/capture input. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG13MFP_GPIO (0x00UL<<SYS_GPG_MFPH_PG13MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG13MFP_EBI_AD4 (0x02UL<<SYS_GPG_MFPH_PG13MFP_Pos) /*!< EBI address/data bus bit4. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG13MFP_SD1_CMD (0x03UL<<SYS_GPG_MFPH_PG13MFP_Pos) /*!< SD/SDIO 1 command/response. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG13MFP_SPIM_MISO (0x04UL<<SYS_GPG_MFPH_PG13MFP_Pos) /*!< 1st SPIM MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG13MFP_QSPI1_MISO0 (0x05UL<<SYS_GPG_MFPH_PG13MFP_Pos) /*!< 1st QSPI1 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG13MFP_UART6_TXD (0x06UL<<SYS_GPG_MFPH_PG13MFP_Pos) /*!< Data transmitter output pin for UART6. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG13MFP_CCAP_HSYNC (0x07UL<<SYS_GPG_MFPH_PG13MFP_Pos) /*!< Sensor horizontal synchronization input pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG13MFP_BPWM0_CH1 (0x0CUL<<SYS_GPG_MFPH_PG13MFP_Pos) /*!< BPWM0 channel1 output/capture input. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG14MFP_GPIO (0x00UL<<SYS_GPG_MFPH_PG14MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG14MFP_EBI_AD5 (0x02UL<<SYS_GPG_MFPH_PG14MFP_Pos) /*!< EBI address/data bus bit5. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG14MFP_SD1_CLK (0x03UL<<SYS_GPG_MFPH_PG14MFP_Pos) /*!< SD/SDIO 1 clock. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG14MFP_SPIM_MOSI (0x04UL<<SYS_GPG_MFPH_PG14MFP_Pos) /*!< 1st SPIM MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG14MFP_QSPI1_MOSI0 (0x05UL<<SYS_GPG_MFPH_PG14MFP_Pos) /*!< 1st QSPI1 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG14MFP_UART6_RXD (0x06UL<<SYS_GPG_MFPH_PG14MFP_Pos) /*!< Data receiver input pin for UART6. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG14MFP_BPWM0_CH0 (0x0CUL<<SYS_GPG_MFPH_PG14MFP_Pos) /*!< BPWM0 channel0 output/capture input. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG15MFP_GPIO (0x00UL<<SYS_GPG_MFPH_PG15MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG15MFP_SD1_nCD (0x03UL<<SYS_GPG_MFPH_PG15MFP_Pos) /*!< SD/SDIO 1 card detect \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG15MFP_CLKO (0x0EUL<<SYS_GPG_MFPH_PG15MFP_Pos) /*!< Clock Output pin. \hideinitializer */
|
|
#define SYS_GPG_MFPH_PG15MFP_EADC0_ST (0x0FUL<<SYS_GPG_MFPH_PG15MFP_Pos) /*!< EADC external trigger input. \hideinitializer */
|
|
/********************* Bit definition of GPH_MFPL register **********************/
|
|
#define SYS_GPH_MFPL_PH0MFP_GPIO (0x00UL<<SYS_GPH_MFPL_PH0MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH0MFP_EBI_ADR7 (0x02UL<<SYS_GPH_MFPL_PH0MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH0MFP_UART5_TXD (0x04UL<<SYS_GPH_MFPL_PH0MFP_Pos) /*!< Data transmitter output pin for UART5. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH0MFP_TM0_EXT (0x0DUL<<SYS_GPH_MFPL_PH0MFP_Pos) /*!< Timer0 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH1MFP_GPIO (0x00UL<<SYS_GPH_MFPL_PH1MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH1MFP_EBI_ADR6 (0x02UL<<SYS_GPH_MFPL_PH1MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH1MFP_UART5_RXD (0x04UL<<SYS_GPH_MFPL_PH1MFP_Pos) /*!< Data receiver input pin for UART5. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH1MFP_TM1_EXT (0x0DUL<<SYS_GPH_MFPL_PH1MFP_Pos) /*!< Timer1 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH2MFP_GPIO (0x00UL<<SYS_GPH_MFPL_PH2MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH2MFP_EBI_ADR5 (0x02UL<<SYS_GPH_MFPL_PH2MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH2MFP_UART5_nRTS (0x04UL<<SYS_GPH_MFPL_PH2MFP_Pos) /*!< Request to Send output pin for UART5. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH2MFP_UART4_TXD (0x05UL<<SYS_GPH_MFPL_PH2MFP_Pos) /*!< Data transmitter output pin for UART4. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH2MFP_I2C0_SCL (0x06UL<<SYS_GPH_MFPL_PH2MFP_Pos) /*!< I2C0 clock pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH2MFP_TM2_EXT (0x0DUL<<SYS_GPH_MFPL_PH2MFP_Pos) /*!< Timer2 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH3MFP_GPIO (0x00UL<<SYS_GPH_MFPL_PH3MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH3MFP_EBI_ADR4 (0x02UL<<SYS_GPH_MFPL_PH3MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH3MFP_SPI1_I2SMCLK (0x03UL<<SYS_GPH_MFPL_PH3MFP_Pos) /*!< SPI1 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH3MFP_UART5_nCTS (0x04UL<<SYS_GPH_MFPL_PH3MFP_Pos) /*!< Clear to Send input pin for UART5. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH3MFP_UART4_RXD (0x05UL<<SYS_GPH_MFPL_PH3MFP_Pos) /*!< Data receiver input pin for UART4. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH3MFP_I2C0_SDA (0x06UL<<SYS_GPH_MFPL_PH3MFP_Pos) /*!< I2C0 data input/output pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH3MFP_TM3_EXT (0x0DUL<<SYS_GPH_MFPL_PH3MFP_Pos) /*!< Timer3 event counter input / toggle output \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH4MFP_GPIO (0x00UL<<SYS_GPH_MFPL_PH4MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH4MFP_EBI_ADR3 (0x02UL<<SYS_GPH_MFPL_PH4MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH4MFP_SPI1_MISO (0x03UL<<SYS_GPH_MFPL_PH4MFP_Pos) /*!< 1st SPI1 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH4MFP_UART7_nRTS (0x04UL<<SYS_GPH_MFPL_PH4MFP_Pos) /*!< Request to Send output pin for UART7. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH4MFP_UART6_TXD (0x05UL<<SYS_GPH_MFPL_PH4MFP_Pos) /*!< Data transmitter output pin for UART6. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH5MFP_GPIO (0x00UL<<SYS_GPH_MFPL_PH5MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH5MFP_EBI_ADR2 (0x02UL<<SYS_GPH_MFPL_PH5MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH5MFP_SPI1_MOSI (0x03UL<<SYS_GPH_MFPL_PH5MFP_Pos) /*!< 1st SPI1 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH5MFP_UART7_nCTS (0x04UL<<SYS_GPH_MFPL_PH5MFP_Pos) /*!< Clear to Send input pin for UART7. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH5MFP_UART6_RXD (0x05UL<<SYS_GPH_MFPL_PH5MFP_Pos) /*!< Data receiver input pin for UART6. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH6MFP_GPIO (0x00UL<<SYS_GPH_MFPL_PH6MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH6MFP_EBI_ADR1 (0x02UL<<SYS_GPH_MFPL_PH6MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH6MFP_SPI1_CLK (0x03UL<<SYS_GPH_MFPL_PH6MFP_Pos) /*!< SPI1 serial clock pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH6MFP_UART7_TXD (0x04UL<<SYS_GPH_MFPL_PH6MFP_Pos) /*!< Data transmitter output pin for UART7. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH7MFP_GPIO (0x00UL<<SYS_GPH_MFPL_PH7MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH7MFP_EBI_ADR0 (0x02UL<<SYS_GPH_MFPL_PH7MFP_Pos) /*!< EBI address/data bus bit*. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH7MFP_SPI1_SS (0x03UL<<SYS_GPH_MFPL_PH7MFP_Pos) /*!< 1st SPI1 slave select pin. \hideinitializer */
|
|
#define SYS_GPH_MFPL_PH7MFP_UART7_RXD (0x04UL<<SYS_GPH_MFPL_PH7MFP_Pos) /*!< Data receiver input pin for UART7. \hideinitializer */
|
|
/********************* Bit definition of GPH_MFPH register **********************/
|
|
#define SYS_GPH_MFPH_PH8MFP_GPIO (0x00UL<<SYS_GPH_MFPH_PH8MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH8MFP_EBI_AD12 (0x02UL<<SYS_GPH_MFPH_PH8MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH8MFP_QSPI0_CLK (0x03UL<<SYS_GPH_MFPH_PH8MFP_Pos) /*!< QSPI0 serial clock pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH8MFP_SC2_PWR (0x04UL<<SYS_GPH_MFPH_PH8MFP_Pos) /*!< SmartCard2 power pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH8MFP_I2S0_DI (0x05UL<<SYS_GPH_MFPH_PH8MFP_Pos) /*!< I2S0 data input. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH8MFP_SPI1_CLK (0x06UL<<SYS_GPH_MFPH_PH8MFP_Pos) /*!< SPI1 serial clock pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH8MFP_UART3_nRTS (0x07UL<<SYS_GPH_MFPH_PH8MFP_Pos) /*!< Request to Send output pin for UART3. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH8MFP_I2C1_SMBAL (0x08UL<<SYS_GPH_MFPH_PH8MFP_Pos) /*!< I2C1 SMBus SMBALTER# pin \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH8MFP_I2C2_SCL (0x09UL<<SYS_GPH_MFPH_PH8MFP_Pos) /*!< I2C2 clock pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH8MFP_UART1_TXD (0x0AUL<<SYS_GPH_MFPH_PH8MFP_Pos) /*!< Data transmitter output pin for UART1. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH9MFP_GPIO (0x00UL<<SYS_GPH_MFPH_PH9MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH9MFP_EBI_AD13 (0x02UL<<SYS_GPH_MFPH_PH9MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH9MFP_QSPI0_SS (0x03UL<<SYS_GPH_MFPH_PH9MFP_Pos) /*!< 1st QSPI0 slave select pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH9MFP_SC2_RST (0x04UL<<SYS_GPH_MFPH_PH9MFP_Pos) /*!< SmartCard2 reset pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH9MFP_I2S0_DO (0x05UL<<SYS_GPH_MFPH_PH9MFP_Pos) /*!< I2S0 data output. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH9MFP_SPI1_SS (0x06UL<<SYS_GPH_MFPH_PH9MFP_Pos) /*!< 1st SPI1 slave select pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH9MFP_UART3_nCTS (0x07UL<<SYS_GPH_MFPH_PH9MFP_Pos) /*!< Clear to Send input pin for UART3. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH9MFP_I2C1_SMBSUS (0x08UL<<SYS_GPH_MFPH_PH9MFP_Pos) /*!< I2C1 SMBus SMBSUS# pin (PMBus CONTROL pin) \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH9MFP_I2C2_SDA (0x09UL<<SYS_GPH_MFPH_PH9MFP_Pos) /*!< I2C2 data input/output pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH9MFP_UART1_RXD (0x0AUL<<SYS_GPH_MFPH_PH9MFP_Pos) /*!< Data receiver input pin for UART1. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH10MFP_GPIO (0x00UL<<SYS_GPH_MFPH_PH10MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH10MFP_EBI_AD14 (0x02UL<<SYS_GPH_MFPH_PH10MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH10MFP_QSPI0_MISO1 (0x03UL<<SYS_GPH_MFPH_PH10MFP_Pos) /*!< 2nd QSPI0 MISO (Master In, Slave Out) pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH10MFP_SC2_nCD (0x04UL<<SYS_GPH_MFPH_PH10MFP_Pos) /*!< SmartCard2 card detect pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH10MFP_I2S0_LRCK (0x05UL<<SYS_GPH_MFPH_PH10MFP_Pos) /*!< I2S0 left right channel clock. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH10MFP_SPI1_I2SMCLK (0x06UL<<SYS_GPH_MFPH_PH10MFP_Pos) /*!< SPI1 I2S master clock output pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH10MFP_UART4_TXD (0x07UL<<SYS_GPH_MFPH_PH10MFP_Pos) /*!< Data transmitter output pin for UART4. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH10MFP_UART0_TXD (0x08UL<<SYS_GPH_MFPH_PH10MFP_Pos) /*!< Data transmitter output pin for UART0. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH11MFP_GPIO (0x00UL<<SYS_GPH_MFPH_PH11MFP_Pos) /*!< General purpose digital I/O pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH11MFP_EBI_AD15 (0x02UL<<SYS_GPH_MFPH_PH11MFP_Pos) /*!< EBI address/data bus bit1. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH11MFP_QSPI0_MOSI1 (0x03UL<<SYS_GPH_MFPH_PH11MFP_Pos) /*!< 2nd QSPI0 MOSI (Master Out, Slave In) pin. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH11MFP_UART4_RXD (0x07UL<<SYS_GPH_MFPH_PH11MFP_Pos) /*!< Data receiver input pin for UART4. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH11MFP_UART0_RXD (0x08UL<<SYS_GPH_MFPH_PH11MFP_Pos) /*!< Data receiver input pin for UART0. \hideinitializer */
|
|
#define SYS_GPH_MFPH_PH11MFP_EPWM0_CH5 (0x0BUL<<SYS_GPH_MFPH_PH11MFP_Pos) /*!< EPWM0 channel5 output/capture input. \hideinitializer */
|
|
|
|
/*@}*/ /* end of group SYS_EXPORTED_CONSTANTS */
|
|
|
|
|
|
/** @addtogroup SYS_EXPORTED_FUNCTIONS SYS Exported Functions
|
|
@{
|
|
*/
|
|
|
|
|
|
/**
|
|
* @brief Clear Brown-out detector interrupt flag
|
|
* @param None
|
|
* @return None
|
|
* @details This macro clear Brown-out detector interrupt flag.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_CLEAR_BOD_INT_FLAG() (SYS->BODCTL |= SYS_BODCTL_BODIF_Msk)
|
|
|
|
/**
|
|
* @brief Set Brown-out detector function to normal mode
|
|
* @param None
|
|
* @return None
|
|
* @details This macro set Brown-out detector to normal mode.
|
|
* The register write-protection function should be disabled before using this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_CLEAR_BOD_LPM() (SYS->BODCTL &= ~SYS_BODCTL_BODLPM_Msk)
|
|
|
|
/**
|
|
* @brief Disable Brown-out detector function
|
|
* @param None
|
|
* @return None
|
|
* @details This macro disable Brown-out detector function.
|
|
* The register write-protection function should be disabled before using this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_DISABLE_BOD() (SYS->BODCTL &= ~SYS_BODCTL_BODEN_Msk)
|
|
|
|
/**
|
|
* @brief Enable Brown-out detector function
|
|
* @param None
|
|
* @return None
|
|
* @details This macro enable Brown-out detector function.
|
|
* The register write-protection function should be disabled before using this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_ENABLE_BOD() (SYS->BODCTL |= SYS_BODCTL_BODEN_Msk)
|
|
|
|
/**
|
|
* @brief Get Brown-out detector interrupt flag
|
|
* @param None
|
|
* @retval 0 Brown-out detect interrupt flag is not set.
|
|
* @retval >=1 Brown-out detect interrupt flag is set.
|
|
* @details This macro get Brown-out detector interrupt flag.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_GET_BOD_INT_FLAG() (SYS->BODCTL & SYS_BODCTL_BODIF_Msk)
|
|
|
|
/**
|
|
* @brief Get Brown-out detector status
|
|
* @param None
|
|
* @retval 0 System voltage is higher than BOD threshold voltage setting or BOD function is disabled.
|
|
* @retval >=1 System voltage is lower than BOD threshold voltage setting.
|
|
* @details This macro get Brown-out detector output status.
|
|
* If the BOD function is disabled, this function always return 0.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_GET_BOD_OUTPUT() (SYS->BODCTL & SYS_BODCTL_BODOUT_Msk)
|
|
|
|
/**
|
|
* @brief Enable Brown-out detector interrupt function
|
|
* @param None
|
|
* @return None
|
|
* @details This macro enable Brown-out detector interrupt function.
|
|
* The register write-protection function should be disabled before using this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_DISABLE_BOD_RST() (SYS->BODCTL &= ~SYS_BODCTL_BODRSTEN_Msk)
|
|
|
|
/**
|
|
* @brief Enable Brown-out detector reset function
|
|
* @param None
|
|
* @return None
|
|
* @details This macro enable Brown-out detect reset function.
|
|
* The register write-protection function should be disabled before using this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_ENABLE_BOD_RST() (SYS->BODCTL |= SYS_BODCTL_BODRSTEN_Msk)
|
|
|
|
/**
|
|
* @brief Set Brown-out detector function low power mode
|
|
* @param None
|
|
* @return None
|
|
* @details This macro set Brown-out detector to low power mode.
|
|
* The register write-protection function should be disabled before using this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_SET_BOD_LPM() (SYS->BODCTL |= SYS_BODCTL_BODLPM_Msk)
|
|
|
|
/**
|
|
* @brief Set Brown-out detector voltage level
|
|
* @param[in] u32Level is Brown-out voltage level. Including :
|
|
* - \ref SYS_BODCTL_BODVL_3_0V
|
|
* - \ref SYS_BODCTL_BODVL_2_8V
|
|
* - \ref SYS_BODCTL_BODVL_2_6V
|
|
* - \ref SYS_BODCTL_BODVL_2_4V
|
|
* - \ref SYS_BODCTL_BODVL_2_2V
|
|
* - \ref SYS_BODCTL_BODVL_2_0V
|
|
* - \ref SYS_BODCTL_BODVL_1_8V
|
|
* - \ref SYS_BODCTL_BODVL_1_6V
|
|
* @return None
|
|
* @details This macro set Brown-out detector voltage level.
|
|
* The write-protection function should be disabled before using this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_SET_BOD_LEVEL(u32Level) (SYS->BODCTL = (SYS->BODCTL & ~SYS_BODCTL_BODVL_Msk) | (u32Level))
|
|
|
|
/**
|
|
* @brief Get reset source is from Brown-out detector reset
|
|
* @param None
|
|
* @retval 0 Previous reset source is not from Brown-out detector reset
|
|
* @retval >=1 Previous reset source is from Brown-out detector reset
|
|
* @details This macro get previous reset source is from Brown-out detect reset or not.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_IS_BOD_RST() (SYS->RSTSTS & SYS_RSTSTS_BODRF_Msk)
|
|
|
|
/**
|
|
* @brief Get reset source is from CPU reset
|
|
* @param None
|
|
* @retval 0 Previous reset source is not from CPU reset
|
|
* @retval >=1 Previous reset source is from CPU reset
|
|
* @details This macro get previous reset source is from CPU reset.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_IS_CPU_RST() (SYS->RSTSTS & SYS_RSTSTS_CPURF_Msk)
|
|
|
|
/**
|
|
* @brief Get reset source is from LVR Reset
|
|
* @param None
|
|
* @retval 0 Previous reset source is not from Low-Voltage-Reset
|
|
* @retval >=1 Previous reset source is from Low-Voltage-Reset
|
|
* @details This macro get previous reset source is from Low-Voltage-Reset.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_IS_LVR_RST() (SYS->RSTSTS & SYS_RSTSTS_LVRF_Msk)
|
|
|
|
/**
|
|
* @brief Get reset source is from Power-on Reset
|
|
* @param None
|
|
* @retval 0 Previous reset source is not from Power-on Reset
|
|
* @retval >=1 Previous reset source is from Power-on Reset
|
|
* @details This macro get previous reset source is from Power-on Reset.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_IS_POR_RST() (SYS->RSTSTS & SYS_RSTSTS_PORF_Msk)
|
|
|
|
/**
|
|
* @brief Get reset source is from reset pin reset
|
|
* @param None
|
|
* @retval 0 Previous reset source is not from reset pin reset
|
|
* @retval >=1 Previous reset source is from reset pin reset
|
|
* @details This macro get previous reset source is from reset pin reset.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_IS_RSTPIN_RST() (SYS->RSTSTS & SYS_RSTSTS_PINRF_Msk)
|
|
|
|
/**
|
|
* @brief Get reset source is from system reset
|
|
* @param None
|
|
* @retval 0 Previous reset source is not from system reset
|
|
* @retval >=1 Previous reset source is from system reset
|
|
* @details This macro get previous reset source is from system reset.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_IS_SYSTEM_RST() (SYS->RSTSTS & SYS_RSTSTS_SYSRF_Msk)
|
|
|
|
/**
|
|
* @brief Get reset source is from window watch dog reset
|
|
* @param None
|
|
* @retval 0 Previous reset source is not from window watch dog reset
|
|
* @retval >=1 Previous reset source is from window watch dog reset
|
|
* @details This macro get previous reset source is from window watch dog reset.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_IS_WDT_RST() (SYS->RSTSTS & SYS_RSTSTS_WDTRF_Msk)
|
|
|
|
/**
|
|
* @brief Disable Low-Voltage-Reset function
|
|
* @param None
|
|
* @return None
|
|
* @details This macro disable Low-Voltage-Reset function.
|
|
* The register write-protection function should be disabled before using this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_DISABLE_LVR() (SYS->BODCTL &= ~SYS_BODCTL_LVREN_Msk)
|
|
|
|
/**
|
|
* @brief Enable Low-Voltage-Reset function
|
|
* @param None
|
|
* @return None
|
|
* @details This macro enable Low-Voltage-Reset function.
|
|
* The register write-protection function should be disabled before using this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_ENABLE_LVR() (SYS->BODCTL |= SYS_BODCTL_LVREN_Msk)
|
|
|
|
/**
|
|
* @brief Disable Power-on Reset function
|
|
* @param None
|
|
* @return None
|
|
* @details This macro disable Power-on Reset function.
|
|
* The register write-protection function should be disabled before using this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_DISABLE_POR() (((SYS->CSERVER & SYS_CSERVER_VERSION_Msk) == 0) ? (SYS->PORCTL = 0x5AA5):(SYS->PORDISAN = 0x5AA5))
|
|
|
|
/**
|
|
* @brief Enable Power-on Reset function
|
|
* @param None
|
|
* @return None
|
|
* @details This macro enable Power-on Reset function.
|
|
* The register write-protection function should be disabled before using this macro.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_ENABLE_POR() (((SYS->CSERVER & SYS_CSERVER_VERSION_Msk) == 0) ? (SYS->PORCTL = 0):(SYS->PORDISAN = 0))
|
|
|
|
/**
|
|
* @brief Clear reset source flag
|
|
* @param[in] u32RstSrc is reset source. Including :
|
|
* - \ref SYS_RSTSTS_PORF_Msk
|
|
* - \ref SYS_RSTSTS_PINRF_Msk
|
|
* - \ref SYS_RSTSTS_WDTRF_Msk
|
|
* - \ref SYS_RSTSTS_LVRF_Msk
|
|
* - \ref SYS_RSTSTS_BODRF_Msk
|
|
* - \ref SYS_RSTSTS_SYSRF_Msk
|
|
* - \ref SYS_RSTSTS_CPURF_Msk
|
|
* - \ref SYS_RSTSTS_CPULKRF_Msk
|
|
* @return None
|
|
* @details This macro clear reset source flag.
|
|
* \hideinitializer
|
|
*/
|
|
#define SYS_CLEAR_RST_SOURCE(u32RstSrc) ((SYS->RSTSTS) = (u32RstSrc) )
|
|
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* static inline functions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* Declare these inline functions here to avoid MISRA C 2004 rule 8.1 error */
|
|
__STATIC_INLINE void SYS_UnlockReg(void);
|
|
__STATIC_INLINE void SYS_LockReg(void);
|
|
|
|
/**
|
|
* @brief Disable register write-protection function
|
|
* @param None
|
|
* @return None
|
|
* @details This function disable register write-protection function.
|
|
* To unlock the protected register to allow write access.
|
|
*/
|
|
__STATIC_INLINE void SYS_UnlockReg(void)
|
|
{
|
|
do
|
|
{
|
|
SYS->REGLCTL = 0x59UL;
|
|
SYS->REGLCTL = 0x16UL;
|
|
SYS->REGLCTL = 0x88UL;
|
|
}
|
|
while(SYS->REGLCTL == 0UL);
|
|
}
|
|
|
|
/**
|
|
* @brief Enable register write-protection function
|
|
* @param None
|
|
* @return None
|
|
* @details This function is used to enable register write-protection function.
|
|
* To lock the protected register to forbid write access.
|
|
*/
|
|
__STATIC_INLINE void SYS_LockReg(void)
|
|
{
|
|
SYS->REGLCTL = 0UL;
|
|
}
|
|
|
|
|
|
void SYS_ClearResetSrc(uint32_t u32Src);
|
|
uint32_t SYS_GetBODStatus(void);
|
|
uint32_t SYS_GetResetSrc(void);
|
|
uint32_t SYS_IsRegLocked(void);
|
|
uint32_t SYS_ReadPDID(void);
|
|
void SYS_ResetChip(void);
|
|
void SYS_ResetCPU(void);
|
|
void SYS_ResetModule(uint32_t u32ModuleIndex);
|
|
void SYS_EnableBOD(int32_t i32Mode, uint32_t u32BODLevel);
|
|
void SYS_DisableBOD(void);
|
|
void SYS_SetPowerLevel(uint32_t u32PowerLevel);
|
|
void SYS_SetVRef(uint32_t u32VRefCTL);
|
|
|
|
/*@}*/ /* end of group SYS_EXPORTED_FUNCTIONS */
|
|
|
|
/*@}*/ /* end of group SYS_Driver */
|
|
|
|
/*@}*/ /* end of group Standard_Driver */
|
|
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __NU_SYS_H__ */
|
|
|
|
/*** (C) COPYRIGHT 2016 Nuvoton Technology Corp. ***/
|