rt-thread/bsp/mini2440/lcd_n35.c

322 lines
8.7 KiB
C
Raw Blame History

/*
* File : lcd_t35.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2010, RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-01-01 bernard first version from QiuYi's driver
*/
#include <rtthread.h>
#include <s3c24x0.h>
/* LCD driver for N3'5 */
#define LCD_WIDTH 240
#define LCD_HEIGHT 320
#define LCD_PIXCLOCK 4
#define LCD_RIGHT_MARGIN 36
#define LCD_LEFT_MARGIN 19
#define LCD_HSYNC_LEN 5
#define LCD_UPPER_MARGIN 1
#define LCD_LOWER_MARGIN 5
#define LCD_VSYNC_LEN 1
#define LCD_XSIZE LCD_WIDTH
#define LCD_YSIZE LCD_HEIGHT
#define SCR_XSIZE LCD_WIDTH
#define SCR_YSIZE LCD_HEIGHT
#define RT_HW_LCD_WIDTH LCD_WIDTH
#define RT_HW_LCD_HEIGHT LCD_HEIGHT
#define MVAL (13)
#define MVAL_USED (0) //0=each frame 1=rate by MVAL
#define INVVDEN (1) //0=normal 1=inverted
#define BSWP (0) //Byte swap control
#define HWSWP (1) //Half word swap control
#define GPB1_TO_OUT() (GPBUP &= 0xfffd, GPBCON &= 0xfffffff3, GPBCON |= 0x00000004)
#define GPB1_TO_1() (GPBDAT |= 0x0002)
#define GPB1_TO_0() (GPBDAT &= 0xfffd)
#define S3C2410_LCDCON1_CLKVAL(x) ((x) << 8)
#define S3C2410_LCDCON1_MMODE (1<<7)
#define S3C2410_LCDCON1_DSCAN4 (0<<5)
#define S3C2410_LCDCON1_STN4 (1<<5)
#define S3C2410_LCDCON1_STN8 (2<<5)
#define S3C2410_LCDCON1_TFT (3<<5)
#define S3C2410_LCDCON1_STN1BPP (0<<1)
#define S3C2410_LCDCON1_STN2GREY (1<<1)
#define S3C2410_LCDCON1_STN4GREY (2<<1)
#define S3C2410_LCDCON1_STN8BPP (3<<1)
#define S3C2410_LCDCON1_STN12BPP (4<<1)
#define S3C2410_LCDCON1_TFT1BPP (8<<1)
#define S3C2410_LCDCON1_TFT2BPP (9<<1)
#define S3C2410_LCDCON1_TFT4BPP (10<<1)
#define S3C2410_LCDCON1_TFT8BPP (11<<1)
#define S3C2410_LCDCON1_TFT16BPP (12<<1)
#define S3C2410_LCDCON1_TFT24BPP (13<<1)
#define S3C2410_LCDCON1_ENVID (1)
#define S3C2410_LCDCON1_MODEMASK 0x1E
#define S3C2410_LCDCON2_VBPD(x) ((x) << 24)
#define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14)
#define S3C2410_LCDCON2_VFPD(x) ((x) << 6)
#define S3C2410_LCDCON2_VSPW(x) ((x) << 0)
#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >> 6) & 0xFF)
#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >> 0) & 0x3F)
#define S3C2410_LCDCON3_HBPD(x) ((x) << 19)
#define S3C2410_LCDCON3_WDLY(x) ((x) << 19)
#define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8)
#define S3C2410_LCDCON3_HFPD(x) ((x) << 0)
#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF)
#define S3C2410_LCDCON4_MVAL(x) ((x) << 8)
#define S3C2410_LCDCON4_HSPW(x) ((x) << 0)
#define S3C2410_LCDCON4_WLH(x) ((x) << 0)
#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF)
#define S3C2410_LCDCON5_BPP24BL (1<<12)
#define S3C2410_LCDCON5_FRM565 (1<<11)
#define S3C2410_LCDCON5_INVVCLK (1<<10)
#define S3C2410_LCDCON5_INVVLINE (1<<9)
#define S3C2410_LCDCON5_INVVFRAME (1<<8)
#define S3C2410_LCDCON5_INVVD (1<<7)
#define S3C2410_LCDCON5_INVVDEN (1<<6)
#define S3C2410_LCDCON5_INVPWREN (1<<5)
#define S3C2410_LCDCON5_INVLEND (1<<4)
#define S3C2410_LCDCON5_PWREN (1<<3)
#define S3C2410_LCDCON5_ENLEND (1<<2)
#define S3C2410_LCDCON5_BSWP (1<<1)
#define S3C2410_LCDCON5_HWSWP (1<<0)
#define S3C2410_LCDINT_FRSYNC (1<<1)
volatile rt_uint16_t _rt_framebuffer[RT_HW_LCD_HEIGHT][RT_HW_LCD_WIDTH];
volatile rt_uint16_t _rt_hw_framebuffer[RT_HW_LCD_HEIGHT][RT_HW_LCD_WIDTH];
void lcd_power_enable(int invpwren,int pwren)
{
//GPG4 is setted as LCD_PWREN
GPGUP = GPGUP | (1<<4); // Pull-up disable
GPGCON = GPGCON | (3<<8); //GPG4=LCD_PWREN
//Enable LCD POWER ENABLE Function
LCDCON5 = LCDCON5&(~(1<<3))|(pwren<<3); // PWREN
LCDCON5 = LCDCON5&(~(1<<5))|(invpwren<<5); // INVPWREN
}
void lcd_envid_on_off(int onoff)
{
if(onoff==1)
/*ENVID=ON*/
LCDCON1|=1;
else
/*ENVID Off*/
LCDCON1 =LCDCON1 & 0x3fffe;
}
//********************** BOARD LCD backlight ****************************
void LcdBkLtSet(rt_uint32_t HiRatio)
{
#define FREQ_PWM1 1000
if(!HiRatio)
{
GPBCON = GPBCON & (~(3<<2)) | (1<<2) ; //GPB1<42><31><EFBFBD><EFBFBD>Ϊoutput
GPBDAT &= ~(1<<1);
return;
}
GPBCON = GPBCON & (~(3<<2)) | (2<<2) ;
if( HiRatio > 100 ) HiRatio = 100 ;
TCON = TCON & (~(0xf<<8)) ; // clear manual update bit, stop Timer1
TCFG0 &= 0xffffff00; // set Timer 0&1 prescaler 0
TCFG0 |= 15; //prescaler = 15+1
TCFG1 &= 0xffffff0f; // set Timer 1 MUX 1/16
TCFG1 |= 0x00000030; // set Timer 1 MUX 1/16
TCNTB1 = ( 100000000>>8 )/FREQ_PWM1; //if set inverter off, when TCNT2<=TCMP2, TOUT is high, TCNT2>TCMP2, TOUT is low
TCMPB1 = ( TCNTB1*(100-HiRatio))/100 ; //if set inverter on, when TCNT2<=TCMP2, TOUT is low, TCNT2>TCMP2, TOUT is high
TCON = TCON & (~(0xf<<8)) | (0x0e<<8) ;
TCON = TCON & (~(0xf<<8)) | (0x0d<<8) ;
}
#ifdef RT_USING_RTGUI
#include <rtgui/driver.h>
#include <rtgui/color.h>
void rt_hw_lcd_update(rtgui_rect_t *rect)
{
volatile rt_uint16_t *src_ptr, *dst_ptr;
rt_uint32_t i, j;
for (i = rect->y1; i < rect->y2; i ++)
{
for(j = rect->x1; j < rect->x2; j++)
_rt_hw_framebuffer[i][j] = _rt_framebuffer[i][j];
}
}
rt_uint8_t * rt_hw_lcd_get_framebuffer(void)
{
return (rt_uint8_t *)_rt_framebuffer;
}
void rt_hw_lcd_set_pixel(rtgui_color_t *c, rt_base_t x, rt_base_t y)
{
if (x < RT_HW_LCD_WIDTH && y < RT_HW_LCD_HEIGHT)
{
_rt_framebuffer[(y)][(x)] = rtgui_color_to_565p(*c);
}
}
void rt_hw_lcd_get_pixel(rtgui_color_t *c, rt_base_t x, rt_base_t y)
{
if (x < RT_HW_LCD_WIDTH && y < RT_HW_LCD_HEIGHT)
{
*c = rtgui_color_from_565p(_rt_framebuffer[(y)][(x)]);
}
return ;
}
void rt_hw_lcd_draw_hline(rtgui_color_t *c, rt_base_t x1, rt_base_t x2, rt_base_t y)
{
rt_uint32_t idx;
rt_uint16_t color;
/* get color pixel */
color = rtgui_color_to_565p(*c);
for (idx = x1; idx < x2; idx ++)
{
_rt_framebuffer[y][idx] = color;
}
}
void rt_hw_lcd_draw_vline(rtgui_color_t *c, rt_base_t x, rt_base_t y1, rt_base_t y2)
{
rt_uint32_t idy;
rt_uint16_t color;
/* get color pixel */
color = rtgui_color_to_565p(*c);
for (idy = y1; idy < y2; idy ++)
{
_rt_framebuffer[idy][x] = color;
}
}
void rt_hw_lcd_draw_raw_hline(rt_uint8_t *pixels, rt_base_t x1, rt_base_t x2, rt_base_t y)
{
rt_memcpy((void*)&_rt_framebuffer[y][x1], pixels, (x2 - x1) * 2);
}
struct rtgui_graphic_driver _rtgui_lcd_driver =
{
"lcd",
2,
RT_HW_LCD_WIDTH,
RT_HW_LCD_HEIGHT,
rt_hw_lcd_update,
rt_hw_lcd_get_framebuffer,
rt_hw_lcd_set_pixel,
rt_hw_lcd_get_pixel,
rt_hw_lcd_draw_hline,
rt_hw_lcd_draw_vline,
rt_hw_lcd_draw_raw_hline
};
#include "finsh.h"
void hline(rt_uint32_t c, int x1, int x2, int y)
{
rtgui_color_t color = (rtgui_color_t)c;
rt_hw_lcd_draw_hline(&color, x1, x2, y);
}
FINSH_FUNCTION_EXPORT(hline, draw a hline);
void vline(rt_uint32_t c, int x, int y1, int y2)
{
rtgui_color_t color = (rtgui_color_t)c;
rt_hw_lcd_draw_vline(&color, x, y1, y2);
}
FINSH_FUNCTION_EXPORT(vline, draw a vline);
void clear()
{
int y;
for (y = 0; y < 320; y ++)
{
rt_hw_lcd_draw_hline((rtgui_color_t*)&white, 0, 240, y);
}
}
FINSH_FUNCTION_EXPORT(clear, clear screen);
#endif
void rt_hw_lcd_init()
{
GPB1_TO_OUT();
GPB1_TO_1();
GPCUP = 0x00000000;
GPCCON = 0xaaaa02a9;
GPDUP = 0x00000000;
GPDCON = 0xaaaaaaaa;
#define M5D(n) ((n)&0x1fffff)
#define LCD_ADDR ((rt_uint32_t)_rt_hw_framebuffer)
LCDCON1 = (LCD_PIXCLOCK << 8) | (3 << 5) | (12 << 1);
LCDCON2 = (LCD_UPPER_MARGIN << 24) | ((LCD_HEIGHT - 1) << 14) | (LCD_LOWER_MARGIN << 6) | (LCD_VSYNC_LEN << 0);
LCDCON3 = (LCD_RIGHT_MARGIN << 19) | ((LCD_WIDTH - 1) << 8) | (LCD_LEFT_MARGIN << 0);
LCDCON4 = (13 << 8) | (LCD_HSYNC_LEN << 0);
#if !defined(LCD_CON5)
#define LCD_CON5 ((1<<11) | (1 << 9) | (1 << 8) | (1 << 3) | (1 << 0))
#endif
LCDCON5 = LCD_CON5;
LCDSADDR1 = ((LCD_ADDR >> 22) << 21) | ((M5D(LCD_ADDR >> 1)) << 0);
LCDSADDR2 = M5D((LCD_ADDR + LCD_WIDTH * LCD_HEIGHT * 2) >> 1);
LCDSADDR3 = LCD_WIDTH;
LCDINTMSK |= (3);
LPCSEL &= (~7) ;
TPAL=0;
LcdBkLtSet(70) ;
lcd_power_enable(0, 1);
lcd_envid_on_off(1);
#ifdef RT_USING_RTGUI
/* add lcd driver into graphic driver */
rtgui_graphic_driver_add(&_rtgui_lcd_driver);
#endif
}