163 lines
4.0 KiB
C
163 lines
4.0 KiB
C
/*
|
|
* Copyright (c) 2006-2023, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2019-07-22 Magicoe The first version for LPC55S6x
|
|
*/
|
|
|
|
#include <rthw.h>
|
|
#include <rtdevice.h>
|
|
#include <rtthread.h>
|
|
|
|
#include "rtconfig.h"
|
|
#include "drv_mma8562.h"
|
|
|
|
enum _mma8562_i2c_constants
|
|
{
|
|
kMMA8562_ADDR = 0x1D,
|
|
kMMA8562_ADDR_With_SAO_Set = kMMA8562_ADDR | 1
|
|
};
|
|
|
|
#define MMA8562_I2CBUS_NAME "i2c4"
|
|
|
|
static struct rt_i2c_bus_device *mma8562_i2c_bus;
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
// Code
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
|
|
|
|
rt_err_t mma8562_read_reg(rt_uint8_t reg, rt_uint8_t len, rt_uint8_t *buf)
|
|
{
|
|
struct rt_i2c_msg msgs[2];
|
|
|
|
msgs[0].addr = kMMA8562_ADDR;
|
|
msgs[0].flags = RT_I2C_WR;
|
|
msgs[0].buf = ®
|
|
msgs[0].len = 1;
|
|
|
|
msgs[1].addr = kMMA8562_ADDR;
|
|
msgs[1].flags = RT_I2C_RD;
|
|
msgs[1].buf = buf;
|
|
msgs[1].len = len;
|
|
|
|
if (rt_i2c_transfer(mma8562_i2c_bus, msgs, 2) == 2)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
else
|
|
{
|
|
return -RT_ERROR;
|
|
}
|
|
}
|
|
|
|
rt_err_t mma8562_write_reg(rt_uint8_t reg, rt_uint8_t data)
|
|
{
|
|
rt_uint8_t buf[2];
|
|
|
|
buf[0] = reg;
|
|
buf[1] = data;
|
|
|
|
if (rt_i2c_master_send(mma8562_i2c_bus, kMMA8562_ADDR, 0, buf ,2) == 2)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
else
|
|
{
|
|
return -RT_ERROR;
|
|
}
|
|
}
|
|
|
|
#ifdef RT_USING_FINSH
|
|
#include <finsh.h>
|
|
#include <rtdevice.h>
|
|
|
|
void get_mma8562(uint8_t data)
|
|
{
|
|
volatile acceleration_t accel;
|
|
|
|
uint8_t ucVal1 = 0;
|
|
uint8_t ucVal2 = 0;
|
|
uint8_t ucStatus = 0;
|
|
|
|
do {
|
|
mma8562_read_reg(kMMA8562_STATUS, 1, &ucStatus);
|
|
} while (!(ucStatus & 0x08));
|
|
|
|
mma8562_read_reg(kMMA8562_OUT_X_MSB, 1, &ucVal1);
|
|
mma8562_read_reg(kMMA8562_OUT_X_LSB, 1, &ucVal2);
|
|
|
|
accel.x = ucVal1*256 +ucVal2;
|
|
|
|
mma8562_read_reg(kMMA8562_OUT_Y_MSB, 1, &ucVal1);
|
|
mma8562_read_reg(kMMA8562_OUT_Y_LSB, 1, &ucVal2);
|
|
accel.y = ucVal1*256 +ucVal2;
|
|
|
|
mma8562_read_reg(kMMA8562_OUT_Z_MSB, 1, &ucVal1);
|
|
mma8562_read_reg(kMMA8562_OUT_Z_LSB, 1, &ucVal2);
|
|
accel.z = ucVal1*256 +ucVal2;
|
|
|
|
rt_kprintf("*** MMA8562 X %d, Y %d, Z %d\r\n", (accel.x), (accel.y), (accel.z) );
|
|
}
|
|
FINSH_FUNCTION_EXPORT(get_mma8562, get mma8562. e.g: get_mma8562(0))
|
|
#endif
|
|
|
|
int mma8562_hw_init(void)
|
|
{
|
|
// Init the I2C port.
|
|
// Should be init in startup
|
|
uint8_t val = 0;
|
|
|
|
mma8562_i2c_bus = rt_i2c_bus_device_find(MMA8562_I2CBUS_NAME); /* */
|
|
|
|
// Read WHO_AM_I register.
|
|
mma8562_read_reg(kMMA8562_WHO_AM_I, 1, &val);
|
|
if (val != kMMA8562_WHO_AM_I_Device_ID)
|
|
{
|
|
rt_kprintf("MMA8562: Unexpected result from WHO_AM_I (0x%02x)\n", val);
|
|
return RT_ERROR;
|
|
}
|
|
|
|
/* please refer to the "example FXOS8700CQ Driver Code" in FXOS8700 datasheet. */
|
|
/* write 0000 0000 = 0x00 to accelerometer control register 1 */
|
|
/* standby */
|
|
/* [7-1] = 0000 000 */
|
|
/* [0]: active=0 */
|
|
val = 0;
|
|
mma8562_write_reg( kMMA8562_CTRL_REG1, val);
|
|
|
|
/* write 0000 0001= 0x01 to XYZ_DATA_CFG register */
|
|
/* [7]: reserved */
|
|
/* [6]: reserved */
|
|
/* [5]: reserved */
|
|
/* [4]: hpf_out=0 */
|
|
/* [3]: reserved */
|
|
/* [2]: reserved */
|
|
/* [1-0]: fs=01 for accelerometer range of +/-4g range with 0.488mg/LSB */
|
|
/* databyte = 0x01; */
|
|
val = 0x01;
|
|
mma8562_write_reg(kMMA8562_XYZ_DATA_CFG, val);
|
|
|
|
/* write 0000 1101 = 0x0D to accelerometer control register 1 */
|
|
/* [7-6]: aslp_rate=00 */
|
|
/* [5-3]: dr=001 for 200Hz data rate (when in hybrid mode) */
|
|
/* [2]: lnoise=1 for low noise mode */
|
|
/* [1]: f_read=0 for normal 16 bit reads */
|
|
/* [0]: active=1 to take the part out of standby and enable sampling */
|
|
/* databyte = 0x0D; */
|
|
val = 0x0D;
|
|
mma8562_write_reg(kMMA8562_CTRL_REG1, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
INIT_DEVICE_EXPORT(mma8562_hw_init);
|
|
|
|
|
|
////////////////////////////////////////////////////////////////////////////////
|
|
// EOF
|
|
////////////////////////////////////////////////////////////////////////////////
|