rt-thread/bsp/stm32/stm32f407-atk-explorer/board/ports/drv_lcd.h

87 lines
2.6 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Copyright (c) 2006-2022, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2021-12-28 unknow copy by STemwin
*/
#ifndef __DRV_LCD_H
#define __DRV_LCD_H
#include <rtthread.h>
#include "rtdevice.h"
#include <drv_common.h>
#ifdef BSP_USING_TOUCH_CAP
#define LCD_W 800
#define LCD_H 480
#endif // BSP_USING_TOUCH_CAP
#ifdef BSP_USING_TOUCH_RES
#define LCD_W 320
#define LCD_H 480
#endif // BSP_USING_TOUCH_RES
//LCD重要参数集
typedef struct
{
uint16_t width; //LCD 宽度
uint16_t height; //LCD 高度
uint16_t id; //LCD ID
uint8_t dir; //横屏还是竖屏控制0竖屏1横屏。
uint16_t wramcmd; //开始写gram指令
uint16_t setxcmd; //设置x坐标指令
uint16_t setycmd; //设置y坐标指令
}_lcd_dev;
//LCD参数
extern _lcd_dev lcddev; //管理LCD重要参数
typedef struct
{
__IO uint16_t REG;
__IO uint16_t RAM;
}LCD_CONTROLLER_TypeDef;
//扫描方向定义
#define L2R_U2D 0 //从左到右,从上到下
#define L2R_D2U 1 //从左到右,从下到上
#define R2L_U2D 2 //从右到左,从上到下
#define R2L_D2U 3 //从右到左,从下到上
#define U2D_L2R 4 //从上到下,从左到右
#define U2D_R2L 5 //从上到下,从右到左
#define D2U_L2R 6 //从下到上,从左到右
#define D2U_R2L 7 //从下到上,从右到左
#ifdef BSP_USING_TOUCH_CAP
#define DFT_SCAN_DIR L2R_U2D //电容触摸屏默认的扫描方向
#endif // BSP_USING_TOUCH_CAP
#ifdef BSP_USING_TOUCH_RES
#define DFT_SCAN_DIR D2U_L2R //电阻触摸屏默认的扫描方向
#endif // BSP_USING_TOUCH_RES
//LCD分辨率设置
#define SSD_HOR_RESOLUTION 800 //LCD水平分辨率
#define SSD_VER_RESOLUTION 480 //LCD垂直分辨率
//LCD驱动参数设置
#define SSD_HOR_PULSE_WIDTH 1 //水平脉宽
#define SSD_HOR_BACK_PORCH 46 //水平前廊
#define SSD_HOR_FRONT_PORCH 210 //水平后廊
#define SSD_VER_PULSE_WIDTH 1 //垂直脉宽
#define SSD_VER_BACK_PORCH 23 //垂直前廊
#define SSD_VER_FRONT_PORCH 22 //垂直前廊
//如下几个参数,自动计算
#define SSD_HT (SSD_HOR_RESOLUTION+SSD_HOR_BACK_PORCH+SSD_HOR_FRONT_PORCH)
#define SSD_HPS (SSD_HOR_BACK_PORCH)
#define SSD_VT (SSD_VER_RESOLUTION+SSD_VER_BACK_PORCH+SSD_VER_FRONT_PORCH)
#define SSD_VPS (SSD_VER_BACK_PORCH)
void lcd_fill_array(rt_uint16_t x_start, rt_uint16_t y_start, rt_uint16_t x_end, rt_uint16_t y_end, void *pcolor);
#endif