libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/ti/c28x/libraries/tms320f28379d/common/source/F2837xD_SysCtrl.c

1277 lines
36 KiB
C
Raw Blame History

//###########################################################################
//
// FILE: F2837xD_SysCtrl.c
//
// TITLE: F2837xD Device System Control Initialization & Support Functions.
//
// DESCRIPTION:
//
// Example initialization of system resources.
//
//###########################################################################
// $TI Release: F2837xD Support Library v3.05.00.00 $
// $Release Date: Tue Jun 26 03:15:23 CDT 2018 $
// $Copyright:
// Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// $
//###########################################################################
//
// Included Files
//
#include "F2837xD_device.h"
#include "F2837xD_Examples.h"
#ifdef __cplusplus
using std::memcpy;
#endif
#define STATUS_FAIL 0
#define STATUS_SUCCESS 1
#define TMR1SYSCLKCTR 0xF0000000
#define TMR2INPCLKCTR 0x800
//
// Functions that will be run from RAM need to be assigned to a different
// section. This section will then be mapped to a load and run address using
// the linker cmd file.
//
// *IMPORTANT*
//
// IF RUNNING FROM FLASH, PLEASE COPY OVER THE SECTION ".TI.ramfunc" FROM
// FLASH TO RAM PRIOR TO CALLING InitSysCtrl(). THIS PREVENTS THE MCU FROM
// THROWING AN EXCEPTION WHEN A CALL TO DELAY_US() IS MADE.
//
#ifndef __cplusplus
#ifdef __TI_COMPILER_VERSION__
#if __TI_COMPILER_VERSION__ >= 15009000
#pragma CODE_SECTION(InitFlash, ".TI.ramfunc");
#pragma CODE_SECTION(FlashOff, ".TI.ramfunc");
#else
#pragma CODE_SECTION(InitFlash, "ramfuncs");
#pragma CODE_SECTION(FlashOff, "ramfuncs");
#endif
#endif
#endif
//
// InitSysCtrl - Initialization of system resources.
//
void InitSysCtrl(void)
{
//
// Disable the watchdog
//
DisableDog();
#ifdef _FLASH
//
// Copy time critical code and Flash setup code to RAM. This includes the
// following functions: InitFlash()
//
// The RamfuncsLoadStart, RamfuncsLoadSize, and RamfuncsRunStart
// symbols are created by the linker. Refer to the device .cmd file.
//
memcpy(&RamfuncsRunStart, &RamfuncsLoadStart, (size_t)&RamfuncsLoadSize);
//
// Call Flash Initialization to setup flash waitstates. This function must
// reside in RAM.
//
InitFlash();
#endif
//
// *IMPORTANT*
//
// The Device_cal function, which copies the ADC & oscillator calibration
// values from TI reserved OTP into the appropriate trim registers, occurs
// automatically in the Boot ROM. If the boot ROM code is bypassed during
// the debug process, the following function MUST be called for the ADC and
// oscillators to function according to specification. The clocks to the
// ADC MUST be enabled before calling this function.
//
// See the device data manual and/or the ADC Reference Manual for more
// information.
//
#ifdef CPU1
EALLOW;
//
// Enable pull-ups on unbonded IOs as soon as possible to reduce power
// consumption.
//
GPIO_EnableUnbondedIOPullups();
CpuSysRegs.PCLKCR13.bit.ADC_A = 1;
CpuSysRegs.PCLKCR13.bit.ADC_B = 1;
CpuSysRegs.PCLKCR13.bit.ADC_C = 1;
CpuSysRegs.PCLKCR13.bit.ADC_D = 1;
//
// Check if device is trimmed
//
if(*((Uint16 *)0x5D1B6) == 0x0000){
//
// Device is not trimmed--apply static calibration values
//
AnalogSubsysRegs.ANAREFTRIMA.all = 31709;
AnalogSubsysRegs.ANAREFTRIMB.all = 31709;
AnalogSubsysRegs.ANAREFTRIMC.all = 31709;
AnalogSubsysRegs.ANAREFTRIMD.all = 31709;
}
CpuSysRegs.PCLKCR13.bit.ADC_A = 0;
CpuSysRegs.PCLKCR13.bit.ADC_B = 0;
CpuSysRegs.PCLKCR13.bit.ADC_C = 0;
CpuSysRegs.PCLKCR13.bit.ADC_D = 0;
EDIS;
//
// Initialize the PLL control: SYSPLLMULT and SYSCLKDIVSEL.
//
// Defined options to be passed as arguments to this function are defined
// in F2837xD_Examples.h.
//
// Note: The internal oscillator CANNOT be used as the PLL source if the
// PLLSYSCLK is configured to frequencies above 194 MHz.
//
// PLLSYSCLK = (XTAL_OSC) * (IMULT + FMULT) / (PLLSYSCLKDIV)
//
#ifdef _LAUNCHXL_F28379D
InitSysPll(XTAL_OSC,IMULT_40,FMULT_0,PLLCLK_BY_2);
#else
InitSysPll(XTAL_OSC, IMULT_20, FMULT_0, PLLCLK_BY_2);
#endif // _LAUNCHXL_F28379D
#endif // CPU1
//
// Turn on all peripherals
//
InitPeripheralClocks();
}
//
// InitPeripheralClocks - Initializes the clocks for the peripherals.
//
// Note: In order to reduce power consumption, turn off the clocks to any
// peripheral that is not specified for your part-number or is not used in the
// application
//
void InitPeripheralClocks(void)
{
EALLOW;
CpuSysRegs.PCLKCR0.bit.CLA1 = 1;
CpuSysRegs.PCLKCR0.bit.DMA = 1;
CpuSysRegs.PCLKCR0.bit.CPUTIMER0 = 1;
CpuSysRegs.PCLKCR0.bit.CPUTIMER1 = 1;
CpuSysRegs.PCLKCR0.bit.CPUTIMER2 = 1;
#ifdef CPU1
CpuSysRegs.PCLKCR0.bit.HRPWM = 1;
#endif
CpuSysRegs.PCLKCR0.bit.TBCLKSYNC = 1;
#ifdef CPU1
CpuSysRegs.PCLKCR1.bit.EMIF1 = 1;
CpuSysRegs.PCLKCR1.bit.EMIF2 = 1;
#endif
CpuSysRegs.PCLKCR2.bit.EPWM1 = 1;
CpuSysRegs.PCLKCR2.bit.EPWM2 = 1;
CpuSysRegs.PCLKCR2.bit.EPWM3 = 1;
CpuSysRegs.PCLKCR2.bit.EPWM4 = 1;
CpuSysRegs.PCLKCR2.bit.EPWM5 = 1;
CpuSysRegs.PCLKCR2.bit.EPWM6 = 1;
CpuSysRegs.PCLKCR2.bit.EPWM7 = 1;
CpuSysRegs.PCLKCR2.bit.EPWM8 = 1;
CpuSysRegs.PCLKCR2.bit.EPWM9 = 1;
CpuSysRegs.PCLKCR2.bit.EPWM10 = 1;
CpuSysRegs.PCLKCR2.bit.EPWM11 = 1;
CpuSysRegs.PCLKCR2.bit.EPWM12 = 1;
CpuSysRegs.PCLKCR3.bit.ECAP1 = 1;
CpuSysRegs.PCLKCR3.bit.ECAP2 = 1;
CpuSysRegs.PCLKCR3.bit.ECAP3 = 1;
CpuSysRegs.PCLKCR3.bit.ECAP4 = 1;
CpuSysRegs.PCLKCR3.bit.ECAP5 = 1;
CpuSysRegs.PCLKCR3.bit.ECAP6 = 1;
CpuSysRegs.PCLKCR4.bit.EQEP1 = 1;
CpuSysRegs.PCLKCR4.bit.EQEP2 = 1;
CpuSysRegs.PCLKCR4.bit.EQEP3 = 1;
CpuSysRegs.PCLKCR6.bit.SD1 = 1;
CpuSysRegs.PCLKCR6.bit.SD2 = 1;
CpuSysRegs.PCLKCR7.bit.SCI_A = 1;
CpuSysRegs.PCLKCR7.bit.SCI_B = 1;
CpuSysRegs.PCLKCR7.bit.SCI_C = 1;
CpuSysRegs.PCLKCR7.bit.SCI_D = 1;
CpuSysRegs.PCLKCR8.bit.SPI_A = 1;
CpuSysRegs.PCLKCR8.bit.SPI_B = 1;
CpuSysRegs.PCLKCR8.bit.SPI_C = 1;
CpuSysRegs.PCLKCR9.bit.I2C_A = 1;
CpuSysRegs.PCLKCR9.bit.I2C_B = 1;
CpuSysRegs.PCLKCR10.bit.CAN_A = 1;
CpuSysRegs.PCLKCR10.bit.CAN_B = 1;
CpuSysRegs.PCLKCR11.bit.McBSP_A = 1;
CpuSysRegs.PCLKCR11.bit.McBSP_B = 1;
#ifdef CPU1
CpuSysRegs.PCLKCR11.bit.USB_A = 1;
CpuSysRegs.PCLKCR12.bit.uPP_A = 1;
#endif
CpuSysRegs.PCLKCR13.bit.ADC_A = 1;
CpuSysRegs.PCLKCR13.bit.ADC_B = 1;
CpuSysRegs.PCLKCR13.bit.ADC_C = 1;
CpuSysRegs.PCLKCR13.bit.ADC_D = 1;
CpuSysRegs.PCLKCR14.bit.CMPSS1 = 1;
CpuSysRegs.PCLKCR14.bit.CMPSS2 = 1;
CpuSysRegs.PCLKCR14.bit.CMPSS3 = 1;
CpuSysRegs.PCLKCR14.bit.CMPSS4 = 1;
CpuSysRegs.PCLKCR14.bit.CMPSS5 = 1;
CpuSysRegs.PCLKCR14.bit.CMPSS6 = 1;
CpuSysRegs.PCLKCR14.bit.CMPSS7 = 1;
CpuSysRegs.PCLKCR14.bit.CMPSS8 = 1;
CpuSysRegs.PCLKCR16.bit.DAC_A = 1;
CpuSysRegs.PCLKCR16.bit.DAC_B = 1;
CpuSysRegs.PCLKCR16.bit.DAC_C = 1;
EDIS;
}
//
// DisablePeripheralClocks - Gates-off all peripheral clocks.
//
void DisablePeripheralClocks(void)
{
EALLOW;
CpuSysRegs.PCLKCR0.all = 0;
CpuSysRegs.PCLKCR1.all = 0;
CpuSysRegs.PCLKCR2.all = 0;
CpuSysRegs.PCLKCR3.all = 0;
CpuSysRegs.PCLKCR4.all = 0;
CpuSysRegs.PCLKCR6.all = 0;
CpuSysRegs.PCLKCR7.all = 0;
CpuSysRegs.PCLKCR8.all = 0;
CpuSysRegs.PCLKCR9.all = 0;
CpuSysRegs.PCLKCR10.all = 0;
CpuSysRegs.PCLKCR11.all = 0;
CpuSysRegs.PCLKCR12.all = 0;
CpuSysRegs.PCLKCR13.all = 0;
CpuSysRegs.PCLKCR14.all = 0;
CpuSysRegs.PCLKCR16.all = 0;
EDIS;
}
//
// InitFlash - This function initializes the Flash Control registers.
//
// *CAUTION*
// This function MUST be executed out of RAM. Executing it out of OTP/Flash
// will yield unpredictable results.
//
#ifdef __cplusplus
#ifdef __TI_COMPILER_VERSION__
#if __TI_COMPILER_VERSION__ >= 15009000
#pragma CODE_SECTION(".TI.ramfunc");
#else
#pragma CODE_SECTION("ramfuncs");
#endif
#endif
#endif
void InitFlash(void)
{
EALLOW;
//
// The default value of VREADST is good enough for the flash to power up
// properly at the INTOSC frequency. Below VREADST configuration covers up
// to the max frequency possible for this device. This is required for
// proper flash wake up at the higher frequencies if users put it to sleep
// for power saving reason.
//
Flash0CtrlRegs.FBAC.bit.VREADST = 0x14;
//
// At reset bank and pump are in sleep. A Flash access will power up the
// bank and pump automatically.
//
// After a Flash access, bank and pump go to low power mode (configurable
// in FBFALLBACK/FPAC1 registers) if there is no further access to flash.
//
// Power up Flash bank and pump. This also sets the fall back mode of
// flash and pump as active.
//
Flash0CtrlRegs.FPAC1.bit.PMPPWR = 0x1;
Flash0CtrlRegs.FBFALLBACK.bit.BNKPWR0 = 0x3;
//
// Disable Cache and prefetch mechanism before changing wait states
//
Flash0CtrlRegs.FRD_INTF_CTRL.bit.DATA_CACHE_EN = 0;
Flash0CtrlRegs.FRD_INTF_CTRL.bit.PREFETCH_EN = 0;
//
// Set waitstates according to frequency
//
// *CAUTION*
// Minimum waitstates required for the flash operating at a given CPU rate
// must be characterized by TI. Refer to the datasheet for the latest
// information.
//
#if CPU_FRQ_200MHZ
Flash0CtrlRegs.FRDCNTL.bit.RWAIT = 0x3;
#endif
#if CPU_FRQ_150MHZ
Flash0CtrlRegs.FRDCNTL.bit.RWAIT = 0x2;
#endif
#if CPU_FRQ_120MHZ
Flash0CtrlRegs.FRDCNTL.bit.RWAIT = 0x2;
#endif
//
// Enable Cache and prefetch mechanism to improve performance of code
// executed from Flash.
//
Flash0CtrlRegs.FRD_INTF_CTRL.bit.DATA_CACHE_EN = 1;
Flash0CtrlRegs.FRD_INTF_CTRL.bit.PREFETCH_EN = 1;
//
// At reset, ECC is enabled. If it is disabled by application software and
// if application again wants to enable ECC.
//
Flash0EccRegs.ECC_ENABLE.bit.ENABLE = 0xA;
EDIS;
//
// Force a pipeline flush to ensure that the write to the last register
// configured occurs before returning.
//
__asm(" RPT #7 || NOP");
}
//
// FlashOff - This function powers down the flash
//
// *CAUTION*
// This function MUST be executed out of RAM. Executing it out of OTP/Flash
// will yield unpredictable results. Also you must seize the flash pump in
// order to power it down.
//
#ifdef __cplusplus
#ifdef __TI_COMPILER_VERSION__
#if __TI_COMPILER_VERSION__ >= 15009000
#pragma CODE_SECTION(".TI.ramfunc");
#else
#pragma CODE_SECTION("ramfuncs");
#endif
#endif
#endif
void FlashOff(void)
{
EALLOW;
//
// Set VREADST to the proper value for the flash banks to power up properly
//
Flash0CtrlRegs.FBAC.bit.VREADST = 0x14;
//
// Power down bank
//
Flash0CtrlRegs.FBFALLBACK.bit.BNKPWR0 = 0;
//
// Power down pump
//
Flash0CtrlRegs.FPAC1.bit.PMPPWR = 0;
EDIS;
}
//
// SeizeFlashPump - Wait until the flash pump is available. Then take control
// of it using the flash pump Semaphore.
//
void SeizeFlashPump(void)
{
EALLOW;
#ifdef CPU1
while (FlashPumpSemaphoreRegs.PUMPREQUEST.bit.PUMP_OWNERSHIP != 0x2)
{
FlashPumpSemaphoreRegs.PUMPREQUEST.all = IPC_PUMP_KEY | 0x2;
}
#elif defined(CPU2)
while (FlashPumpSemaphoreRegs.PUMPREQUEST.bit.PUMP_OWNERSHIP != 0x1)
{
FlashPumpSemaphoreRegs.PUMPREQUEST.all = IPC_PUMP_KEY | 0x1;
}
#endif
EDIS;
}
//
// ReleaseFlashPump - Release control of the flash pump using the flash pump
// semaphore.
//
void ReleaseFlashPump(void)
{
EALLOW;
FlashPumpSemaphoreRegs.PUMPREQUEST.all = IPC_PUMP_KEY | 0x0;
EDIS;
}
//
// ServiceDog - This function resets the watchdog timer.
//
// Enable this function for using ServiceDog in the application.
//
void ServiceDog(void)
{
EALLOW;
WdRegs.WDKEY.bit.WDKEY = 0x0055;
WdRegs.WDKEY.bit.WDKEY = 0x00AA;
EDIS;
}
//
// DisableDog - This function disables the watchdog timer.
//
void DisableDog(void)
{
volatile Uint16 temp;
//
// Grab the clock config first so we don't clobber it
//
EALLOW;
temp = WdRegs.WDCR.all & 0x0007;
WdRegs.WDCR.all = 0x0068 | temp;
EDIS;
}
#ifdef CPU1
//
// InitSysPll()
// This function initializes the PLL registers.
// Note:
// - The internal oscillator CANNOT be used as the PLL source if the
// PLLSYSCLK is configured to frequencies above 194 MHz.
//
// - This function uses the Watchdog as a monitor for the PLL. The user
// watchdog settings will be modified and restored upon completion. Function
// allows for a minimum re lock attempt for 5 tries. Re lock attempt is carried
// out if either SLIP condition occurs or SYSCLK to Input Clock ratio is off by 10%
//
// - This function uses the following resources to support PLL initialization:
// o Watchdog
// o CPU Timer 1
// o CPU Timer 2
//
void InitSysPll(Uint16 clock_source, Uint16 imult, Uint16 fmult, Uint16 divsel)
{
Uint16 SCSR, WDCR, WDWCR, intStatus, t1TCR, t1TPR, t1TPRH;
Uint16 t2TCR, t2TPR, t2TPRH, t2SRC, t2Prescale;
Uint32 t1PRD, t2PRD, ctr1;
float sysclkToInClkError, mult, div;
bool sysclkInvalidFreq=true;
if((clock_source == ClkCfgRegs.CLKSRCCTL1.bit.OSCCLKSRCSEL) &&
(imult == ClkCfgRegs.SYSPLLMULT.bit.IMULT) &&
(fmult == ClkCfgRegs.SYSPLLMULT.bit.FMULT) &&
(divsel == ClkCfgRegs.SYSCLKDIVSEL.bit.PLLSYSCLKDIV))
{
//
// Everything is set as required, so just return
//
return;
}
if(clock_source != ClkCfgRegs.CLKSRCCTL1.bit.OSCCLKSRCSEL)
{
switch (clock_source)
{
case INT_OSC1:
SysIntOsc1Sel();
break;
case INT_OSC2:
SysIntOsc2Sel();
break;
case XTAL_OSC:
SysXtalOscSel();
break;
}
}
EALLOW;
if(imult != ClkCfgRegs.SYSPLLMULT.bit.IMULT ||
fmult != ClkCfgRegs.SYSPLLMULT.bit.FMULT)
{
Uint16 i;
//
// This bit is reset only by POR
//
if(DevCfgRegs.SYSDBGCTL.bit.BIT_0 == 1)
{
//
// The user can optionally insert handler code here. This will only
// be executed if a watchdog reset occurred after a failed system
// PLL initialization. See your device user's guide for more
// information.
//
// If the application has a watchdog reset handler, this bit should
// be checked to determine if the watchdog reset occurred because
// of the PLL.
//
// No action here will continue with retrying the PLL as normal.
//
// Failed PLL initialization is due to any of the following:
// - No PLL clock
// - SLIP condition
// - Wrong Frequency
//
}
//
// Bypass PLL and set dividers to /1
//
ClkCfgRegs.SYSPLLCTL1.bit.PLLCLKEN = 0;
asm(" RPT #20 || NOP");
ClkCfgRegs.SYSCLKDIVSEL.bit.PLLSYSCLKDIV = 0;
//
// Lock the PLL five times. This helps ensure a successful start.
// Five is the minimum recommended number. The user can increase this
// number according to allotted system initialization time.
//
for(i = 0; i < 5; i++)
{
//
// Turn off PLL
//
ClkCfgRegs.SYSPLLCTL1.bit.PLLEN = 0;
asm(" RPT #20 || NOP");
//
// Write multiplier, which automatically turns on the PLL
//
ClkCfgRegs.SYSPLLMULT.all = ((fmult << 8U) | imult);
//
// Wait for the SYSPLL lock counter
//
while(ClkCfgRegs.SYSPLLSTS.bit.LOCKS != 1)
{
//
// Uncomment to service the watchdog
//
// ServiceDog();
}
}
}
//
// Set divider to produce slower output frequency to limit current increase
//
if(divsel != PLLCLK_BY_126)
{
ClkCfgRegs.SYSCLKDIVSEL.bit.PLLSYSCLKDIV = divsel + 1;
}
else
{
ClkCfgRegs.SYSCLKDIVSEL.bit.PLLSYSCLKDIV = divsel;
}
//
// *CAUTION*
// It is recommended to use the following watchdog code to monitor the PLL
// startup sequence. If your application has already cleared the watchdog
// SCRS[WDOVERRIDE] bit this cannot be done. It is recommended not to clear
// this bit until after the PLL has been initiated.
//
//
// Backup User Watchdog
//
SCSR = WdRegs.SCSR.all;
WDCR = WdRegs.WDCR.all;
WDWCR = WdRegs.WDWCR.all;
//
// Disable windowed functionality, reset counter
//
EALLOW;
WdRegs.WDWCR.all = 0x0;
WdRegs.WDKEY.bit.WDKEY = 0x55;
WdRegs.WDKEY.bit.WDKEY = 0xAA;
//
// Disable global interrupts
//
intStatus = __disable_interrupts();
//
// Configure for watchdog reset and to run at max frequency
//
WdRegs.SCSR.all = 0x0;
WdRegs.WDCR.all = 0x28;
//
// This bit is reset only by power-on-reset (POR) and will not be cleared
// by a WD reset
//
DevCfgRegs.SYSDBGCTL.bit.BIT_0 = 1;
//
// Enable PLLSYSCLK is fed from system PLL clock
//
ClkCfgRegs.SYSPLLCTL1.bit.PLLCLKEN = 1;
//
// Delay to ensure system is clocking from PLL prior to clearing status bit
//
asm(" RPT #20 || NOP");
//
// Service watchdog
//
ServiceDog();
//
// Slip Bit Monitor and SYSCLK Frequency Check using timers
// Re-lock routine for SLIP condition or if SYSCLK and CLKSRC timer counts
// are off by +/- 10%.
// At a minimum, SYSCLK check is performed. Re lock attempt is carried out
// if SLIPS bit is set. This while loop is monitored by watchdog.
// In the event that the PLL does not successfully lock, the loop will be
// aborted by watchdog reset.
//
EALLOW;
while(sysclkInvalidFreq == true)
{
if(ClkCfgRegs.SYSPLLSTS.bit.SLIPS == 1)
{
//
// Bypass PLL
//
ClkCfgRegs.SYSPLLCTL1.bit.PLLCLKEN = 0;
asm(" RPT #20 || NOP");
//
// Turn off PLL
//
ClkCfgRegs.SYSPLLCTL1.bit.PLLEN = 0;
asm(" RPT #20 || NOP");
//
// Write multipliers, which automatically turns on the PLL
//
ClkCfgRegs.SYSPLLMULT.all = ((fmult << 8U) | imult);
//
// Wait for the SYSPLL lock counter to expire
//
while(ClkCfgRegs.SYSPLLSTS.bit.LOCKS != 1);
//
// Enable PLLSYSCLK is fed from system PLL clock
//
ClkCfgRegs.SYSPLLCTL1.bit.PLLCLKEN = 1;
//
// Delay to ensure system is clocking from PLL
//
asm(" RPT #20 || NOP");
}
//
// Backup timer1 and timer2 settings
//
t1TCR = CpuTimer1Regs.TCR.all;
t1PRD = CpuTimer1Regs.PRD.all;
t1TPR = CpuTimer1Regs.TPR.all;
t1TPRH = CpuTimer1Regs.TPRH.all;
t2SRC = CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKSRCSEL;
t2Prescale = CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKPRESCALE;
t2TCR = CpuTimer2Regs.TCR.all;
t2PRD = CpuTimer2Regs.PRD.all;
t2TPR = CpuTimer2Regs.TPR.all;
t2TPRH = CpuTimer2Regs.TPRH.all;
//
// Set up timers 1 and 2
// Configure timer1 to count SYSCLK cycles
//
CpuTimer1Regs.TCR.bit.TSS = 1; // stop timer1
CpuTimer1Regs.PRD.all = TMR1SYSCLKCTR; // seed timer1 counter
CpuTimer1Regs.TPR.bit.TDDR = 0x0; // sysclock divider
CpuTimer1Regs.TCR.bit.TRB = 1; // reload timer with value in PRD
CpuTimer1Regs.TCR.bit.TIF = 1; // clear interrupt flag
CpuTimer1Regs.TCR.bit.TIE = 1; // enable interrupt
//
// Configure timer2 to count Input clock cycles
//
switch(clock_source)
{
case INT_OSC1:
// Clk Src = INT_OSC1
CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKSRCSEL = 0x1;
break;
case INT_OSC2:
// Clk Src = INT_OSC2
CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKSRCSEL = 0x2;
break;
case XTAL_OSC:
// Clk Src = XTAL
CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKSRCSEL = 0x3;
break;
}
CpuTimer2Regs.TCR.bit.TIF = 1; // clear interrupt flag
CpuTimer2Regs.TCR.bit.TIE = 1; // enable interrupt
CpuTimer2Regs.TCR.bit.TSS = 1; // stop timer2
CpuTimer2Regs.PRD.all = TMR2INPCLKCTR; // seed timer2 counter
CpuTimer2Regs.TPR.bit.TDDR = 0x0; // sysclock divider
CpuTimer2Regs.TCR.bit.TRB = 1; // reload timer with value in PRD
//
// Stop/Start timer counters
//
CpuTimer1Regs.TCR.bit.TSS = 1; // stop timer1
CpuTimer2Regs.TCR.bit.TSS = 1; // stop timer2
CpuTimer1Regs.TCR.bit.TRB = 1; // reload timer1 with value in PRD
CpuTimer2Regs.TCR.bit.TRB = 1; // reload timer2 with value in PRD
CpuTimer2Regs.TCR.bit.TIF = 1; // clear timer2 interrupt flag
CpuTimer2Regs.TCR.bit.TSS = 0; // start timer2
CpuTimer1Regs.TCR.bit.TSS = 0; // start timer1
//
// Stop timers if either timer1 or timer2 counters overflow
//
while((CpuTimer2Regs.TCR.bit.TIF == 0) && (CpuTimer1Regs.TCR.bit.TIF == 0));
CpuTimer1Regs.TCR.bit.TSS = 1; // stop timer1
CpuTimer2Regs.TCR.bit.TSS = 1; // stop timer2
//
// Calculate elapsed counts on timer1
//
ctr1 = TMR1SYSCLKCTR - CpuTimer1Regs.TIM.all;
//
// Restore timer settings
//
CpuTimer1Regs.TCR.all = t1TCR;
CpuTimer1Regs.PRD.all = t1PRD;
CpuTimer1Regs.TPR.all = t1TPR;
CpuTimer1Regs.TPRH.all = t1TPRH;
CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKSRCSEL = t2SRC;
CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKPRESCALE = t2Prescale;
CpuTimer2Regs.TCR.all = t2TCR;
CpuTimer2Regs.PRD.all = t2PRD;
CpuTimer2Regs.TPR.all = t2TPR;
CpuTimer2Regs.TPRH.all = t2TPRH;
//
// Calculate Clock Error:
// Error = (mult/div) - (timer1 count/timer2 count)
//
mult = (float)(imult) + (float)(fmult)/4;
div = (float)((!ClkCfgRegs.SYSCLKDIVSEL.bit.PLLSYSCLKDIV) ? 1 : (ClkCfgRegs.SYSCLKDIVSEL.bit.PLLSYSCLKDIV << 1));
sysclkToInClkError = (mult/div) - ((float)ctr1/(float)TMR2INPCLKCTR);
//
// sysclkInvalidFreq will be set to true if sysclkToInClkError is off by 10%
//
sysclkInvalidFreq = ((sysclkToInClkError > 0.10) || (sysclkToInClkError < -0.10));
}
//
// Clear bit
//
DevCfgRegs.SYSDBGCTL.bit.BIT_0 = 0;
//
// Restore user watchdog, first resetting counter
//
WdRegs.WDKEY.bit.WDKEY = 0x55;
WdRegs.WDKEY.bit.WDKEY = 0xAA;
WDCR |= 0x28; // Setup WD key--KEY bits always read 0
WdRegs.WDCR.all = WDCR;
WdRegs.WDWCR.all = WDWCR;
WdRegs.SCSR.all = SCSR & 0xFFFE; // Mask write to bit 0 (W1toClr)
//
// Restore state of ST1[INTM]. This was set by the __disable_interrupts()
// intrinsic previously.
//
if(!(intStatus & 0x1))
{
EINT;
}
//
// Restore state of ST1[DBGM]. This was set by the __disable_interrupts()
// intrinsic previously.
//
if(!(intStatus & 0x2))
{
asm(" CLRC DBGM");
}
//
// 200 PLLSYSCLK delay to allow voltage regulator to stabilize prior
// to increasing entire system clock frequency.
//
asm(" RPT #200 || NOP");
//
// Set the divider to user value
//
ClkCfgRegs.SYSCLKDIVSEL.bit.PLLSYSCLKDIV = divsel;
EDIS;
}
#endif // CPU1
//
// InitAuxPll - This function initializes the AUXPLL registers.
//
// Note: For this function to properly detect PLL startup,
// SYSCLK >= 2*AUXPLLCLK after the AUXPLL is selected as the clocking source.
//
// This function will use CPU Timer 2 to monitor a successful lock of the
// AUXPLL.
//
void InitAuxPll(Uint16 clock_source, Uint16 imult, Uint16 fmult, Uint16 divsel)
{
Uint16 i;
Uint16 counter = 0;
Uint16 started = 0;
Uint16 t2TCR, t2TPR, t2TPRH, t2SRC, t2Prescale, attempts;
Uint32 t2PRD;
if((clock_source == ClkCfgRegs.CLKSRCCTL2.bit.AUXOSCCLKSRCSEL) &&
(imult == ClkCfgRegs.AUXPLLMULT.bit.IMULT) &&
(fmult == ClkCfgRegs.AUXPLLMULT.bit.FMULT) &&
(divsel == ClkCfgRegs.AUXCLKDIVSEL.bit.AUXPLLDIV))
{
//
// Everything is set as required, so just return
//
return;
}
switch (clock_source)
{
case INT_OSC2:
AuxIntOsc2Sel();
break;
case XTAL_OSC:
AuxXtalOscSel();
break;
case AUXCLKIN:
AuxAuxClkSel();
break;
}
//
// Backup Timer 2 settings
//
t2SRC = CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKSRCSEL;
t2Prescale = CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKPRESCALE;
t2TCR = CpuTimer2Regs.TCR.all;
t2PRD = CpuTimer2Regs.PRD.all;
t2TPR = CpuTimer2Regs.TPR.all;
t2TPRH = CpuTimer2Regs.TPRH.all;
//
// Configure Timer 2 for AUXPLL as source in known configuration
//
EALLOW;
CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKSRCSEL = 0x6;
CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKPRESCALE = 0x0; // Divide by 1
CpuTimer2Regs.TCR.bit.TSS = 1; // Stop timer
CpuTimer2Regs.PRD.all = 10; // Small PRD value to detect overflow
CpuTimer2Regs.TPR.all = 0;
CpuTimer2Regs.TPRH.all = 0;
CpuTimer2Regs.TCR.bit.TIE = 0; // Disable timer interrupts
//
// Set AUX Divide by 8 to ensure that AUXPLLCLK <= SYSCLK/2 while using
// Timer 2
//
ClkCfgRegs.AUXCLKDIVSEL.bit.AUXPLLDIV = 0x3;
EDIS;
while((counter < 5) && (started == 0))
{
EALLOW;
ClkCfgRegs.AUXPLLCTL1.bit.PLLEN = 0; // Turn off AUXPLL
asm(" RPT #20 || NOP"); // Small delay for power down
//
// Set integer and fractional multiplier, which automatically turns on
// the PLL
//
ClkCfgRegs.AUXPLLMULT.all = ((fmult << 8U) | imult);
//
// Enable AUXPLL
//
ClkCfgRegs.AUXPLLCTL1.bit.PLLEN = 1;
EDIS;
//
// Wait for the AUXPLL lock counter
//
while(ClkCfgRegs.AUXPLLSTS.bit.LOCKS != 1)
{
//
// Uncomment to service the watchdog
//
// ServiceDog();
}
//
// Enable AUXPLLCLK to be fed from AUX PLL
//
EALLOW;
ClkCfgRegs.AUXPLLCTL1.bit.PLLCLKEN = 1;
asm(" RPT #20 || NOP");
//
// CPU Timer 2 will now be setup to be clocked from AUXPLLCLK. This is
// used to test that the PLL has successfully started.
//
CpuTimer2Regs.TCR.bit.TRB = 1; // Reload period value
CpuTimer2Regs.TCR.bit.TSS = 0; // Start Timer
//
// Check to see timer is counting properly
//
for(i = 0; i < 1000; i++)
{
//
// Check overflow flag
//
if(CpuTimer2Regs.TCR.bit.TIF)
{
//
// Clear overflow flag
//
CpuTimer2Regs.TCR.bit.TIF = 1;
//
// Set flag to indicate PLL started and break out of for-loop
//
started = 1;
break;
}
}
//
// Stop timer
//
CpuTimer2Regs.TCR.bit.TSS = 1;
counter++;
EDIS;
}
if(started == 0)
{
//
// AUX PLL may not have started. Reset multiplier to 0 (bypass PLL).
//
EALLOW;
ClkCfgRegs.AUXPLLMULT.all = 0;
EDIS;
//
// The user should put some handler code here based on how this
// condition should be handled in their application.
//
asm(" ESTOP0");
}
//
// Slip Bit Monitor
// Re-lock routine for SLIP condition
//
attempts = 0;
while(ClkCfgRegs.AUXPLLSTS.bit.SLIPS && (attempts < 10))
{
EALLOW;
//
// Bypass AUXPLL
//
ClkCfgRegs.AUXPLLCTL1.bit.PLLCLKEN = 0;
asm(" RPT #20 || NOP");
//
// Turn off AUXPLL
//
ClkCfgRegs.AUXPLLCTL1.bit.PLLEN = 0;
asm(" RPT #20 || NOP");
//
// Set integer and fractional multiplier, which automatically turns
// on the PLL
//
ClkCfgRegs.AUXPLLMULT.all = ((fmult << 8U) | imult);
//
// Wait for the AUXPLL lock counter
//
while(ClkCfgRegs.AUXPLLSTS.bit.LOCKS != 1);
//
// Enable AUXPLLCLK to be fed from AUXPLL
//
ClkCfgRegs.AUXPLLCTL1.bit.PLLCLKEN = 1;
asm(" RPT #20 || NOP");
attempts++;
EDIS;
}
//
// Set divider to desired value
//
EALLOW;
ClkCfgRegs.AUXCLKDIVSEL.bit.AUXPLLDIV = divsel;
//
// Restore Timer 2 configuration
//
CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKSRCSEL = t2SRC;
CpuSysRegs.TMR2CLKCTL.bit.TMR2CLKPRESCALE = t2Prescale;
CpuTimer2Regs.TCR.all = t2TCR;
CpuTimer2Regs.PRD.all = t2PRD;
CpuTimer2Regs.TPR.all = t2TPR;
CpuTimer2Regs.TPRH.all = t2TPRH;
//
// Reload period value
//
CpuTimer2Regs.TCR.bit.TRB = 1;
EDIS;
}
//
// CsmUnlock - This function unlocks the CSM. User must replace 0xFFFF's with
// current password for the DSP. Returns 1 if unlock is successful.
//
Uint16 CsmUnlock(void)
{
volatile Uint16 temp;
//
// Load the key registers with the current password. The 0xFFFF's are dummy
// passwords. User should replace them with the correct password for the
// DSP.
//
EALLOW;
DcsmZ1Regs.Z1_CSMKEY0 = 0xFFFFFFFF;
DcsmZ1Regs.Z1_CSMKEY1 = 0xFFFFFFFF;
DcsmZ1Regs.Z1_CSMKEY2 = 0xFFFFFFFF;
DcsmZ1Regs.Z1_CSMKEY3 = 0xFFFFFFFF;
DcsmZ2Regs.Z2_CSMKEY0 = 0xFFFFFFFF;
DcsmZ2Regs.Z2_CSMKEY1 = 0xFFFFFFFF;
DcsmZ2Regs.Z2_CSMKEY2 = 0xFFFFFFFF;
DcsmZ2Regs.Z2_CSMKEY3 = 0xFFFFFFFF;
EDIS;
return(0);
}
//
// SysIntOsc1Sel - This function switches to Internal Oscillator 1.
//
void SysIntOsc1Sel(void)
{
EALLOW;
ClkCfgRegs.CLKSRCCTL1.bit.OSCCLKSRCSEL = 2; // Clk Src = INTOSC1
ClkCfgRegs.CLKSRCCTL1.bit.XTALOFF=1; // Turn off XTALOSC
EDIS;
}
//
// SysIntOsc2Sel - This function switches to Internal oscillator 2.
//
void SysIntOsc2Sel(void)
{
EALLOW;
ClkCfgRegs.CLKSRCCTL1.bit.INTOSC2OFF=0; // Turn on INTOSC2
ClkCfgRegs.CLKSRCCTL1.bit.OSCCLKSRCSEL = 0; // Clk Src = INTOSC2
ClkCfgRegs.CLKSRCCTL1.bit.XTALOFF=1; // Turn off XTALOSC
EDIS;
}
//
// SysXtalOscSel - This function switches to External CRYSTAL oscillator.
//
void SysXtalOscSel(void)
{
EALLOW;
ClkCfgRegs.CLKSRCCTL1.bit.XTALOFF=0; // Turn on XTALOSC
ClkCfgRegs.CLKSRCCTL1.bit.OSCCLKSRCSEL = 1; // Clk Src = XTAL
EDIS;
}
//
// AuxIntOsc2Sel - This function switches to Internal oscillator 2.
//
void AuxIntOsc2Sel(void)
{
EALLOW;
ClkCfgRegs.CLKSRCCTL1.bit.INTOSC2OFF=0; // Turn on INTOSC2
ClkCfgRegs.CLKSRCCTL2.bit.AUXOSCCLKSRCSEL = 0; // Clk Src = INTOSC2
EDIS;
}
//
// AuxXtalOscSel - This function switches to External CRYSTAL oscillator.
//
void AuxXtalOscSel(void)
{
EALLOW;
ClkCfgRegs.CLKSRCCTL1.bit.XTALOFF=0; // Turn on XTALOSC
ClkCfgRegs.CLKSRCCTL2.bit.AUXOSCCLKSRCSEL = 1; // Clk Src = XTAL
EDIS;
}
//
// AuxAUXCLKOscSel - This function switches to AUXCLKIN (from a GPIO).
//
void AuxAuxClkSel(void)
{
EALLOW;
ClkCfgRegs.CLKSRCCTL2.bit.AUXOSCCLKSRCSEL = 2; // Clk Src = XTAL
EDIS;
}
//
// IDLE - Enter IDLE mode (single CPU).
//
void IDLE(void)
{
EALLOW;
CpuSysRegs.LPMCR.bit.LPM = LPM_IDLE;
EDIS;
asm(" IDLE");
}
//
// STANDBY - Enter STANDBY mode (single CPU).
//
void STANDBY(void)
{
EALLOW;
CpuSysRegs.LPMCR.bit.LPM = LPM_STANDBY;
EDIS;
asm(" IDLE");
}
//
// HALT - Enter HALT mode (dual CPU). Puts CPU2 in IDLE mode first.
//
void HALT(void)
{
#if defined(CPU2)
IDLE();
#elif defined(CPU1)
EALLOW;
CpuSysRegs.LPMCR.bit.LPM = LPM_HALT;
EDIS;
while(DevCfgRegs.LPMSTAT.bit.CPU2LPMSTAT != 0x1);
EALLOW;
ClkCfgRegs.SYSPLLCTL1.bit.PLLCLKEN = 0;
ClkCfgRegs.SYSPLLCTL1.bit.PLLEN = 0;
EDIS;
asm(" IDLE");
#endif
}
//
// HIB - Enter HIB mode (dual CPU). Puts CPU2 in STANDBY first. Alternately,
// CPU2 may be in reset.
void HIB(void)
{
#if defined(CPU2)
STANDBY();
#elif defined(CPU1)
EALLOW;
CpuSysRegs.LPMCR.bit.LPM = LPM_HIB;
EDIS;
while((DevCfgRegs.LPMSTAT.bit.CPU2LPMSTAT == 0x0) &&
(DevCfgRegs.RSTSTAT.bit.CPU2RES == 1));
DisablePeripheralClocks();
EALLOW;
ClkCfgRegs.SYSPLLCTL1.bit.PLLCLKEN = 0;
ClkCfgRegs.SYSPLLCTL1.bit.PLLEN = 0;
EDIS;
asm(" IDLE");
#endif
}
View Git Blame Copy Permalink