210 lines
8.3 KiB
Markdown
210 lines
8.3 KiB
Markdown
# 芯来科技RVSTAR开发板 #
|
||
|
||
## 简介
|
||
|
||
**RVSTAR开发板** 是由芯来科技公司推出的基于采用芯来科技RISC-V架构处理器芯片的GD32VF103的开发板。
|
||
|
||
更多关于 **RVSTAR开发板** 开发板的详细资料请参见 [RVSTAR开发板快速入门](https://www.rvmcu.com/quickstart-quickstart-index-u-RV_STAR.html)
|
||
|
||
### 板载资源
|
||
|
||
| 硬件 | 描述 |
|
||
| --- | --- |
|
||
| 内核 | Nuclei N205 |
|
||
| 架构 | 32-bit RV32IMAC |
|
||
| 主频 | 108 MHz |
|
||
|
||
## 工具安装
|
||
|
||
### 安装工具链
|
||
|
||
请根据[安装Nuclei RISC-V GCC Toolchain和OpenOCD](https://doc.nucleisys.com/nuclei_sdk/quickstart.html#setup-tools-and-environment) 来安装依赖的工具。
|
||
|
||
### 添加环境变量
|
||
|
||
将Nuclei RISC-V GCC Toolchain和OpenOCD的环境变量进行设置。
|
||
|
||
#### Windows
|
||
|
||
假设工具安装在 **D:\Software\Nuclei**目录下, 则可以修改系统环境变量**PATH**,
|
||
将**D:\Software\Nuclei\gcc\bin;D:\Software\Nuclei\openocd\bin;**增加到**PATH**中。
|
||
|
||
或者在ENV工具命令行中运行
|
||
|
||
~~~cmd
|
||
set PATH=D:\Software\Nuclei\gcc\bin;D:\Software\Nuclei\openocd\bin;%PATH%
|
||
~~~
|
||
|
||
#### Linux
|
||
|
||
假设工具安装在 **~/Software/Nuclei**目录下, 通过在Linux的``.bashrc``增加如下一行代码
|
||
来添加环境变量。
|
||
|
||
~~~bash
|
||
export PATH=~/Software/Nuclei/gcc/bin:~/Software/Nuclei/openocd/bin:$PATH
|
||
~~~
|
||
|
||
或者在ENV工具命令行中运行
|
||
|
||
~~~bash
|
||
export PATH=~/Software/Nuclei/gcc/bin:~/Software/Nuclei/openocd/bin:$PATH
|
||
~~~
|
||
|
||
**注意**: 对应的RISC-V GCC和OPENOCD的路径请替换成自己安装的路径。
|
||
|
||
## 烧写及执行
|
||
|
||
### [驱动设置](https://doc.nucleisys.com/nuclei_board_labs/hw/hw.html#on-board-debugger-driver)
|
||
|
||
### 编译程序
|
||
|
||
下载好[RT-Thread](https://github.com/RT-Thread/rt-thread)的代码和[ENV工具](https://www.rt-thread.org/document/site/tutorial/env-video/)以后。
|
||
|
||
按照ENV工具的教程, 在**rt-thread\bsp\nuclei\gd32vf103_rvstar**目录打开ENV工具命令行。
|
||
|
||
**注意**: 请确保Nuclei GCC和Nuclei OpenOCD的路径设置正确无误。
|
||
|
||
1. 运行 ``pkgs --update``来下载最新的依赖的**Nuclei SDK**开发包
|
||
2. **可选**: 运行 ``menuconfig``来进行内核配置
|
||
3. 运行 ``scons -c``清理之前的编译结果
|
||
4. 运行 ``scons``来进行代码的编译
|
||
|
||
### 下载程序
|
||
|
||
在保证程序能够正常编译后, 在相同ENV终端执行``scons --run upload``进行代码的下载。
|
||
|
||
正常下载的输出如下:
|
||
|
||
~~~
|
||
scons: Reading SConscript files ...
|
||
Supported downloaded modes for board gd32vf103v_rvstar are flashxip, chosen downloaded mode is flashxip
|
||
Upload application rtthread.elf using openocd and gdb
|
||
riscv-nuclei-elf-gdb rtthread.elf -ex "set remotetimeout 240" -ex "target remote | openocd --pipe -f D:/workspace/Sourcecode/rt-thread/bsp/nuclei/gd32vf103_rvstar/packages/nuclei_sdk-latest/SoC/gd32vf103/Board/gd32vf103v_rvstar/openocd_gd32vf103.cfg" --batch -ex "monitor halt" -ex "monitor flash protect 0 0 last off" -ex "load" -ex "monitor resume" -ex "monitor shutdown" -ex "quit"
|
||
D:\Software\Nuclei\gcc\bin\riscv-nuclei-elf-gdb.exe: warning: Couldn't determine a path for the index cache directory.
|
||
|
||
Nuclei OpenOCD, 64-bit Open On-Chip Debugger 0.10.0+dev-00014-g0eae03214 (2019-12-12-07:43)
|
||
Licensed under GNU GPL v2
|
||
For bug reports, read
|
||
http://openocd.org/doc/doxygen/bugs.html
|
||
rt_thread_idle_entry (parameter=0x0) at D:\workspace\Sourcecode\rt-thread\src\idle.c:251
|
||
251 if (idle_hook_list[i] != RT_NULL)
|
||
cleared protection for sectors 0 through 127 on flash bank 0
|
||
|
||
Loading section .init, size 0x264 lma 0x8000000
|
||
Loading section .text, size 0x140de lma 0x8000280
|
||
Loading section .rodata, size 0x37c0 lma 0x8014360
|
||
Loading section .data, size 0x404 lma 0x8017b20
|
||
Start address 0x800015c, load size 98054
|
||
Transfer rate: 8 KB/sec, 10894 bytes/write.
|
||
shutdown command invoked
|
||
A debugging session is active.
|
||
|
||
Inferior 1 [Remote target] will be detached.
|
||
|
||
Quit anyway? (y or n) [answered Y; input not from terminal]
|
||
Remote communication error. Target disconnected.: Success.
|
||
~~~
|
||
|
||
下载程序之后, 连接串口(115200-N-8-1), 可以看到 RT-Thread 的输出信息：
|
||
|
||
```
|
||
initialize rti_board_start:0 done
|
||
|
||
\ | /
|
||
- RT - Thread Operating System
|
||
/ | \ 4.0.3 build Apr 9 2020
|
||
2006 - 2020 Copyright by rt-thread team
|
||
do components initialization.
|
||
initialize rti_board_end:0 done
|
||
initialize dfs_init:0 done
|
||
initialize libc_system_init:0 done
|
||
initialize finsh_system_init:0 done
|
||
msh />
|
||
```
|
||
|
||
在串口终端(我这里使用的是TeraTerm)输入``ps``即可查看当前线程工作情况:
|
||
|
||
~~~
|
||
msh />ps
|
||
thread pri status sp stack size max used left tick error
|
||
-------- --- ------- ---------- ---------- ------ ---------- ---
|
||
thread01 19 suspend 0x00000158 0x0000018c 87% 0x00000005 000
|
||
thread00 19 suspend 0x00000158 0x0000018c 87% 0x00000005 000
|
||
tshell 20 running 0x00000258 0x00001000 18% 0x00000004 000
|
||
tidle0 31 ready 0x000000a8 0x0000018c 59% 0x0000000e 000
|
||
timer 4 suspend 0x000000f8 0x00000200 49% 0x00000009 000
|
||
main 10 suspend 0x00000168 0x00000800 36% 0x00000006 000
|
||
msh />
|
||
~~~
|
||
|
||
### 调试程序
|
||
|
||
在保证程序编译成功后, 在相同ENV终端执行``scons --run debug``进行代码在命令行下进行GDB调试。
|
||
|
||
正常的调试输出如下：
|
||
|
||
~~~
|
||
scons: Reading SConscript files ...
|
||
Supported downloaded modes for board gd32vf103v_rvstar are flashxip, chosen downloaded mode is flashxip
|
||
Debug application rtthread.elf using openocd and gdb
|
||
riscv-nuclei-elf-gdb rtthread.elf -ex "set remotetimeout 240" -ex "target remote | openocd --pipe -f D:/workspace/Sourcecode/rt-thread/bsp/nuclei/gd32vf103_rvstar/packages/nuclei_sdk-latest/SoC/gd32vf103/Board/gd32vf103v_rvstar/openocd_gd32vf103.cfg"
|
||
D:\Software\Nuclei\gcc\bin\riscv-nuclei-elf-gdb.exe: warning: Couldn't determine a path for the index cache directory.
|
||
GNU gdb (GDB) 8.3.0.20190516-git
|
||
Copyright (C) 2019 Free Software Foundation, Inc.
|
||
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
|
||
This is free software: you are free to change and redistribute it.
|
||
There is NO WARRANTY, to the extent permitted by law.
|
||
Type "show copying" and "show warranty" for details.
|
||
This GDB was configured as "--host=i686-w64-mingw32 --target=riscv-nuclei-elf".
|
||
Type "show configuration" for configuration details.
|
||
For bug reporting instructions, please see:
|
||
<http://www.gnu.org/software/gdb/bugs/>.
|
||
Find the GDB manual and other documentation resources online at:
|
||
<http://www.gnu.org/software/gdb/documentation/>.
|
||
|
||
For help, type "help".
|
||
Type "apropos word" to search for commands related to "word"...
|
||
Reading symbols from rtthread.elf...
|
||
Remote debugging using | openocd --pipe -f D:/workspace/Sourcecode/rt-thread/bsp/nuclei/gd32vf103_rvstar/packages/nuclei_sdk-latest/SoC/gd32vf103/Board/gd32vf103v_rvstar/openocd_gd32vf103.cfg Nuclei OpenOCD, 64-bit Open On-Chip Debugger 0.10.0+dev-00014-g0eae03214 (2019-12-12-07:43)
|
||
Licensed under GNU GPL v2
|
||
For bug reports, read
|
||
http://openocd.org/doc/doxygen/bugs.html
|
||
rt_thread_idle_entry (parameter=0x0) at D:\workspace\Sourcecode\rt-thread\src\idle.c:249
|
||
249 for (i = 0; i < RT_IDLE_HOOK_LIST_SIZE; i++)
|
||
(gdb)
|
||
(gdb) b main.c:35
|
||
Breakpoint 1 at 0x8000290: file applications\main.c, line 35.
|
||
(gdb) c
|
||
Continuing.
|
||
Note: automatically using hardware breakpoints for read-only addresses.
|
||
|
||
Breakpoint 1, thread_entry (parameter=0x0) at applications\main.c:35
|
||
35 rt_thread_mdelay(500);
|
||
(gdb)
|
||
~~~
|
||
|
||
调试例子参见如下文档:
|
||
|
||
* https://doc.nucleisys.com/nuclei_sdk/quickstart.html#debug-application
|
||
|
||
为了更方便的进行调试, 也可以下载**Nuclei Studio**集成开发环境, 创建一个Debug Configuration, 选择编译好的
|
||
ELF文件, 然后配置OPENOCD和GDB即可, OPENOCD配置文件路径为**bsp\nuclei\gd32vf103_rvstar\packages\nuclei_sdk-latest\SoC\gd32vf103\Board\gd32vf103v_rvstar\openocd_gd32vf103.cfg**
|
||
|
||
|
||
## 驱动支持情况
|
||
|
||
| 驱动 | 支持情况 | 备注 |
|
||
| ------ | ---- | :------: |
|
||
| UART | 支持 | RV-STAR板载串口是UART4 |
|
||
|
||
**注:**
|
||
|
||
- 适配RT-Thread的驱动框架的代码在 [../libraries/gd32vf103/HAL_Drivers](../libraries/gd32vf103/HAL_Drivers)目录下。
|
||
- 如果有开发者想适配更多的驱动, 请在对应目录下增加驱动适配支持。
|
||
|
||
## 联系人信息
|
||
|
||
维护人：
|
||
- [fanghuaqi](https://github.com/fanghuaqi)
|
||
|