821 lines
20 KiB
C
821 lines
20 KiB
C
/*
|
|
* Copyright (c) 2006-2018, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2021-01-05 RiceChen the first version
|
|
*/
|
|
|
|
#include <rtdevice.h>
|
|
#include "drv_spi.h"
|
|
#include "drv_lcd.h"
|
|
#include "drv_lcd_font.h"
|
|
#include "drv_gpio.h"
|
|
|
|
#define DBG_SECTION_NAME "LCD"
|
|
#define DBG_COLOR
|
|
#define DBG_LEVEL DBG_LOG
|
|
#include <rtdbg.h>
|
|
|
|
#define LCD_PWR_PIN GET_PIN(B, 15)
|
|
#define LCD_DC_PIN GET_PIN(C, 6)
|
|
#define LCD_RES_PIN GET_PIN(C, 7)
|
|
#define LCD_CLEAR_SEND_NUMBER 5760
|
|
|
|
rt_uint16_t BACK_COLOR = WHITE, FORE_COLOR = BLACK;
|
|
|
|
static struct rt_spi_device *spi_dev_lcd;
|
|
|
|
static int rt_hw_lcd_config(void)
|
|
{
|
|
spi_dev_lcd = (struct rt_spi_device *)rt_device_find("lcd");
|
|
|
|
/* config spi */
|
|
{
|
|
struct rt_spi_configuration cfg;
|
|
cfg.data_width = 8;
|
|
cfg.mode = RT_SPI_MASTER | RT_SPI_MODE_3 | RT_SPI_MSB;
|
|
cfg.max_hz = 42 * 1000 * 1000; /* 42M,SPI max 42MHz,lcd 4-wire spi */
|
|
|
|
rt_spi_configure(spi_dev_lcd, &cfg);
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t lcd_write_cmd(const rt_uint8_t cmd)
|
|
{
|
|
rt_size_t len;
|
|
|
|
rt_pin_write(LCD_DC_PIN, PIN_LOW);
|
|
|
|
len = rt_spi_send(spi_dev_lcd, &cmd, 1);
|
|
|
|
if (len != 1)
|
|
{
|
|
LOG_I("lcd_write_cmd error. %d", len);
|
|
return -RT_ERROR;
|
|
}
|
|
else
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
}
|
|
|
|
static rt_err_t lcd_write_data(const rt_uint8_t data)
|
|
{
|
|
rt_size_t len;
|
|
|
|
rt_pin_write(LCD_DC_PIN, PIN_HIGH);
|
|
|
|
len = rt_spi_send(spi_dev_lcd, &data, 1);
|
|
|
|
if (len != 1)
|
|
{
|
|
LOG_I("lcd_write_data error. %d", len);
|
|
return -RT_ERROR;
|
|
}
|
|
else
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
}
|
|
|
|
static rt_err_t lcd_write_half_word(const rt_uint16_t da)
|
|
{
|
|
rt_size_t len;
|
|
char data[2] = {0};
|
|
|
|
data[0] = da >> 8;
|
|
data[1] = da;
|
|
|
|
rt_pin_write(LCD_DC_PIN, PIN_HIGH);
|
|
len = rt_spi_send(spi_dev_lcd, data, 2);
|
|
if (len != 2)
|
|
{
|
|
LOG_I("lcd_write_half_word error. %d", len);
|
|
return -RT_ERROR;
|
|
}
|
|
else
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
}
|
|
|
|
static void lcd_gpio_init(void)
|
|
{
|
|
rt_hw_lcd_config();
|
|
|
|
rt_pin_mode(LCD_DC_PIN, PIN_MODE_OUTPUT);
|
|
rt_pin_mode(LCD_RES_PIN, PIN_MODE_OUTPUT);
|
|
|
|
rt_pin_mode(LCD_PWR_PIN, PIN_MODE_OUTPUT);
|
|
rt_pin_write(LCD_PWR_PIN, PIN_LOW);
|
|
|
|
rt_pin_write(LCD_RES_PIN, PIN_LOW);
|
|
//wait at least 100ms for reset
|
|
rt_thread_delay(RT_TICK_PER_SECOND / 10);
|
|
rt_pin_write(LCD_RES_PIN, PIN_HIGH);
|
|
}
|
|
|
|
static int rt_hw_lcd_init(void)
|
|
{
|
|
rt_hw_spi_device_attach("spi2", "lcd", GPIOC, GPIO_PIN_3);
|
|
lcd_gpio_init();
|
|
/* Memory Data Access Control */
|
|
lcd_write_cmd(0x36);
|
|
lcd_write_data(0x00);
|
|
/* RGB 5-6-5-bit */
|
|
lcd_write_cmd(0x3A);
|
|
lcd_write_data(0x65);
|
|
/* Porch Setting */
|
|
lcd_write_cmd(0xB2);
|
|
lcd_write_data(0x0C);
|
|
lcd_write_data(0x0C);
|
|
lcd_write_data(0x00);
|
|
lcd_write_data(0x33);
|
|
lcd_write_data(0x33);
|
|
/* Gate Control */
|
|
lcd_write_cmd(0xB7);
|
|
lcd_write_data(0x72);
|
|
/* VCOM Setting */
|
|
lcd_write_cmd(0xBB);
|
|
lcd_write_data(0x3D);
|
|
/* LCM Control */
|
|
lcd_write_cmd(0xC0);
|
|
lcd_write_data(0x2C);
|
|
/* VDV and VRH Command Enable */
|
|
lcd_write_cmd(0xC2);
|
|
lcd_write_data(0x01);
|
|
/* VRH Set */
|
|
lcd_write_cmd(0xC3);
|
|
lcd_write_data(0x19);
|
|
/* VDV Set */
|
|
lcd_write_cmd(0xC4);
|
|
lcd_write_data(0x20);
|
|
/* Frame Rate Control in Normal Mode */
|
|
lcd_write_cmd(0xC6);
|
|
lcd_write_data(0x0F);
|
|
/* Power Control 1 */
|
|
lcd_write_cmd(0xD0);
|
|
lcd_write_data(0xA4);
|
|
lcd_write_data(0xA1);
|
|
/* Positive Voltage Gamma Control */
|
|
lcd_write_cmd(0xE0);
|
|
lcd_write_data(0xD0);
|
|
lcd_write_data(0x04);
|
|
lcd_write_data(0x0D);
|
|
lcd_write_data(0x11);
|
|
lcd_write_data(0x13);
|
|
lcd_write_data(0x2B);
|
|
lcd_write_data(0x3F);
|
|
lcd_write_data(0x54);
|
|
lcd_write_data(0x4C);
|
|
lcd_write_data(0x18);
|
|
lcd_write_data(0x0D);
|
|
lcd_write_data(0x0B);
|
|
lcd_write_data(0x1F);
|
|
lcd_write_data(0x23);
|
|
/* Negative Voltage Gamma Control */
|
|
lcd_write_cmd(0xE1);
|
|
lcd_write_data(0xD0);
|
|
lcd_write_data(0x04);
|
|
lcd_write_data(0x0C);
|
|
lcd_write_data(0x11);
|
|
lcd_write_data(0x13);
|
|
lcd_write_data(0x2C);
|
|
lcd_write_data(0x3F);
|
|
lcd_write_data(0x44);
|
|
lcd_write_data(0x51);
|
|
lcd_write_data(0x2F);
|
|
lcd_write_data(0x1F);
|
|
lcd_write_data(0x1F);
|
|
lcd_write_data(0x20);
|
|
lcd_write_data(0x23);
|
|
/* Display Inversion On */
|
|
lcd_write_cmd(0x21);
|
|
/* Sleep Out */
|
|
lcd_write_cmd(0x11);
|
|
/* wait for power stability */
|
|
rt_thread_mdelay(100);
|
|
|
|
lcd_clear(WHITE);
|
|
lcd_show_string(0, 0, 32, "RT-Thread");
|
|
|
|
/* display on */
|
|
rt_pin_write(LCD_PWR_PIN, PIN_HIGH);
|
|
lcd_write_cmd(0x29);
|
|
|
|
return RT_EOK;
|
|
}
|
|
INIT_DEVICE_EXPORT(rt_hw_lcd_init);
|
|
|
|
/**
|
|
* Set background color and foreground color
|
|
*
|
|
* @param back background color
|
|
* @param fore fore color
|
|
*
|
|
* @return void
|
|
*/
|
|
void lcd_set_color(rt_uint16_t back, rt_uint16_t fore)
|
|
{
|
|
BACK_COLOR = back;
|
|
FORE_COLOR = fore;
|
|
}
|
|
|
|
void lcd_display_on(void)
|
|
{
|
|
rt_pin_write(LCD_PWR_PIN, PIN_HIGH);
|
|
}
|
|
|
|
void lcd_display_off(void)
|
|
{
|
|
rt_pin_write(LCD_PWR_PIN, PIN_LOW);
|
|
}
|
|
|
|
/* lcd enter the minimum power consumption mode and backlight off. */
|
|
void lcd_enter_sleep(void)
|
|
{
|
|
rt_pin_write(LCD_PWR_PIN, PIN_LOW);
|
|
rt_thread_mdelay(5);
|
|
lcd_write_cmd(0x10);
|
|
}
|
|
/* lcd turn off sleep mode and backlight on. */
|
|
void lcd_exit_sleep(void)
|
|
{
|
|
rt_pin_write(LCD_PWR_PIN, PIN_HIGH);
|
|
rt_thread_mdelay(5);
|
|
lcd_write_cmd(0x11);
|
|
rt_thread_mdelay(120);
|
|
}
|
|
|
|
/**
|
|
* Set drawing area
|
|
*
|
|
* @param x1 start of x position
|
|
* @param y1 start of y position
|
|
* @param x2 end of x position
|
|
* @param y2 end of y position
|
|
*
|
|
* @return void
|
|
*/
|
|
void lcd_address_set(rt_uint16_t x1, rt_uint16_t y1, rt_uint16_t x2, rt_uint16_t y2)
|
|
{
|
|
lcd_write_cmd(0x2a);
|
|
lcd_write_data(x1 >> 8);
|
|
lcd_write_data(x1);
|
|
lcd_write_data(x2 >> 8);
|
|
lcd_write_data(x2);
|
|
|
|
lcd_write_cmd(0x2b);
|
|
lcd_write_data(y1 >> 8);
|
|
lcd_write_data(y1);
|
|
lcd_write_data(y2 >> 8);
|
|
lcd_write_data(y2);
|
|
|
|
lcd_write_cmd(0x2C);
|
|
}
|
|
|
|
/**
|
|
* clear the lcd.
|
|
*
|
|
* @param color Fill color
|
|
*
|
|
* @return void
|
|
*/
|
|
void lcd_clear(rt_uint16_t color)
|
|
{
|
|
rt_uint16_t i, j;
|
|
rt_uint8_t data[2] = {0};
|
|
rt_uint8_t *buf = RT_NULL;
|
|
|
|
data[0] = color >> 8;
|
|
data[1] = color;
|
|
lcd_address_set(0, 0, LCD_W - 1, LCD_H - 1);
|
|
|
|
/* 5760 = 240*240/20 */
|
|
buf = rt_malloc(LCD_CLEAR_SEND_NUMBER);
|
|
if (buf)
|
|
{
|
|
/* 2880 = 5760/2 color is 16 bit */
|
|
for (j = 0; j < LCD_CLEAR_SEND_NUMBER / 2; j++)
|
|
{
|
|
buf[j * 2] = data[0];
|
|
buf[j * 2 + 1] = data[1];
|
|
}
|
|
|
|
rt_pin_write(LCD_DC_PIN, PIN_HIGH);
|
|
for (i = 0; i < 20; i++)
|
|
{
|
|
rt_spi_send(spi_dev_lcd, buf, LCD_CLEAR_SEND_NUMBER);
|
|
}
|
|
rt_free(buf);
|
|
}
|
|
else
|
|
{
|
|
rt_pin_write(LCD_DC_PIN, PIN_HIGH);
|
|
for (i = 0; i < LCD_W; i++)
|
|
{
|
|
for (j = 0; j < LCD_H; j++)
|
|
{
|
|
rt_spi_send(spi_dev_lcd, data, 2);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* display a point on the lcd.
|
|
*
|
|
* @param x x position
|
|
* @param y y position
|
|
*
|
|
* @return void
|
|
*/
|
|
void lcd_draw_point(rt_uint16_t x, rt_uint16_t y)
|
|
{
|
|
lcd_address_set(x, y, x, y);
|
|
lcd_write_half_word(FORE_COLOR);
|
|
}
|
|
|
|
/**
|
|
* display a point on the lcd using the given colour.
|
|
*
|
|
* @param x x position
|
|
* @param y y position
|
|
* @param color color of point
|
|
*
|
|
* @return void
|
|
*/
|
|
void lcd_draw_point_color(rt_uint16_t x, rt_uint16_t y, rt_uint16_t color)
|
|
{
|
|
lcd_address_set(x, y, x, y);
|
|
lcd_write_half_word(color);
|
|
}
|
|
|
|
/**
|
|
* full color on the lcd.
|
|
*
|
|
* @param x_start start of x position
|
|
* @param y_start start of y position
|
|
* @param x_end end of x position
|
|
* @param y_end end of y position
|
|
* @param color Fill color
|
|
*
|
|
* @return void
|
|
*/
|
|
void lcd_fill(rt_uint16_t x_start, rt_uint16_t y_start, rt_uint16_t x_end, rt_uint16_t y_end, rt_uint16_t color)
|
|
{
|
|
rt_uint16_t i = 0, j = 0;
|
|
rt_uint32_t size = 0, size_remain = 0;
|
|
rt_uint8_t *fill_buf = RT_NULL;
|
|
|
|
size = (x_end - x_start) * (y_end - y_start) * 2;
|
|
|
|
if (size > LCD_CLEAR_SEND_NUMBER)
|
|
{
|
|
/* the number of remaining to be filled */
|
|
size_remain = size - LCD_CLEAR_SEND_NUMBER;
|
|
size = LCD_CLEAR_SEND_NUMBER;
|
|
}
|
|
|
|
lcd_address_set(x_start, y_start, x_end, y_end);
|
|
|
|
fill_buf = (rt_uint8_t *)rt_malloc(size);
|
|
if (fill_buf)
|
|
{
|
|
/* fast fill */
|
|
while (1)
|
|
{
|
|
for (i = 0; i < size / 2; i++)
|
|
{
|
|
fill_buf[2 * i] = color >> 8;
|
|
fill_buf[2 * i + 1] = color;
|
|
}
|
|
rt_pin_write(LCD_DC_PIN, PIN_HIGH);
|
|
rt_spi_send(spi_dev_lcd, fill_buf, size);
|
|
|
|
/* Fill completed */
|
|
if (size_remain == 0)
|
|
break;
|
|
|
|
/* calculate the number of fill next time */
|
|
if (size_remain > LCD_CLEAR_SEND_NUMBER)
|
|
{
|
|
size_remain = size_remain - LCD_CLEAR_SEND_NUMBER;
|
|
}
|
|
else
|
|
{
|
|
size = size_remain;
|
|
size_remain = 0;
|
|
}
|
|
}
|
|
rt_free(fill_buf);
|
|
}
|
|
else
|
|
{
|
|
for (i = y_start; i <= y_end; i++)
|
|
{
|
|
for (j = x_start; j <= x_end; j++)lcd_write_half_word(color);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* display a line on the lcd.
|
|
*
|
|
* @param x1 x1 position
|
|
* @param y1 y1 position
|
|
* @param x2 x2 position
|
|
* @param y2 y2 position
|
|
*
|
|
* @return void
|
|
*/
|
|
void lcd_draw_line(rt_uint16_t x1, rt_uint16_t y1, rt_uint16_t x2, rt_uint16_t y2)
|
|
{
|
|
rt_uint16_t t;
|
|
rt_uint32_t i = 0;
|
|
int xerr = 0, yerr = 0, delta_x, delta_y, distance;
|
|
int incx, incy, row, col;
|
|
|
|
if (y1 == y2)
|
|
{
|
|
/* fast draw transverse line */
|
|
lcd_address_set(x1, y1, x2, y2);
|
|
|
|
rt_uint8_t line_buf[480] = {0};
|
|
|
|
for (i = 0; i < x2 - x1; i++)
|
|
{
|
|
line_buf[2 * i] = FORE_COLOR >> 8;
|
|
line_buf[2 * i + 1] = FORE_COLOR;
|
|
}
|
|
|
|
rt_pin_write(LCD_DC_PIN, PIN_HIGH);
|
|
rt_spi_send(spi_dev_lcd, line_buf, (x2 - x1) * 2);
|
|
|
|
return ;
|
|
}
|
|
|
|
delta_x = x2 - x1;
|
|
delta_y = y2 - y1;
|
|
row = x1;
|
|
col = y1;
|
|
if (delta_x > 0)incx = 1;
|
|
else if (delta_x == 0)incx = 0;
|
|
else
|
|
{
|
|
incx = -1;
|
|
delta_x = -delta_x;
|
|
}
|
|
if (delta_y > 0)incy = 1;
|
|
else if (delta_y == 0)incy = 0;
|
|
else
|
|
{
|
|
incy = -1;
|
|
delta_y = -delta_y;
|
|
}
|
|
if (delta_x > delta_y)distance = delta_x;
|
|
else distance = delta_y;
|
|
for (t = 0; t <= distance + 1; t++)
|
|
{
|
|
lcd_draw_point(row, col);
|
|
xerr += delta_x ;
|
|
yerr += delta_y ;
|
|
if (xerr > distance)
|
|
{
|
|
xerr -= distance;
|
|
row += incx;
|
|
}
|
|
if (yerr > distance)
|
|
{
|
|
yerr -= distance;
|
|
col += incy;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* display a rectangle on the lcd.
|
|
*
|
|
* @param x1 x1 position
|
|
* @param y1 y1 position
|
|
* @param x2 x2 position
|
|
* @param y2 y2 position
|
|
*
|
|
* @return void
|
|
*/
|
|
void lcd_draw_rectangle(rt_uint16_t x1, rt_uint16_t y1, rt_uint16_t x2, rt_uint16_t y2)
|
|
{
|
|
lcd_draw_line(x1, y1, x2, y1);
|
|
lcd_draw_line(x1, y1, x1, y2);
|
|
lcd_draw_line(x1, y2, x2, y2);
|
|
lcd_draw_line(x2, y1, x2, y2);
|
|
}
|
|
|
|
/**
|
|
* display a circle on the lcd.
|
|
*
|
|
* @param x x position of Center
|
|
* @param y y position of Center
|
|
* @param r radius
|
|
*
|
|
* @return void
|
|
*/
|
|
void lcd_draw_circle(rt_uint16_t x0, rt_uint16_t y0, rt_uint8_t r)
|
|
{
|
|
int a, b;
|
|
int di;
|
|
a = 0;
|
|
b = r;
|
|
di = 3 - (r << 1);
|
|
while (a <= b)
|
|
{
|
|
lcd_draw_point(x0 - b, y0 - a);
|
|
lcd_draw_point(x0 + b, y0 - a);
|
|
lcd_draw_point(x0 - a, y0 + b);
|
|
lcd_draw_point(x0 - b, y0 - a);
|
|
lcd_draw_point(x0 - a, y0 - b);
|
|
lcd_draw_point(x0 + b, y0 + a);
|
|
lcd_draw_point(x0 + a, y0 - b);
|
|
lcd_draw_point(x0 + a, y0 + b);
|
|
lcd_draw_point(x0 - b, y0 + a);
|
|
a++;
|
|
//Bresenham
|
|
if (di < 0)di += 4 * a + 6;
|
|
else
|
|
{
|
|
di += 10 + 4 * (a - b);
|
|
b--;
|
|
}
|
|
lcd_draw_point(x0 + a, y0 + b);
|
|
}
|
|
}
|
|
|
|
static void lcd_show_char(rt_uint16_t x, rt_uint16_t y, rt_uint8_t data, rt_uint32_t size)
|
|
{
|
|
rt_uint8_t temp;
|
|
rt_uint8_t num = 0;;
|
|
rt_uint8_t pos, t;
|
|
rt_uint16_t colortemp = FORE_COLOR;
|
|
rt_uint8_t *font_buf = RT_NULL;
|
|
|
|
if (x > LCD_W - size / 2 || y > LCD_H - size)return;
|
|
|
|
data = data - ' ';
|
|
#ifdef ASC2_1608
|
|
if (size == 16)
|
|
{
|
|
lcd_address_set(x, y, x + size / 2 - 1, y + size - 1);//(x,y,x+8-1,y+16-1)
|
|
|
|
font_buf = (rt_uint8_t *)rt_malloc(size * size);
|
|
if (!font_buf)
|
|
{
|
|
/* fast show char */
|
|
for (pos = 0; pos < size * (size / 2) / 8; pos++)
|
|
{
|
|
temp = asc2_1608[(rt_uint16_t)data * size * (size / 2) / 8 + pos];
|
|
for (t = 0; t < 8; t++)
|
|
{
|
|
if (temp & 0x80)colortemp = FORE_COLOR;
|
|
else colortemp = BACK_COLOR;
|
|
lcd_write_half_word(colortemp);
|
|
temp <<= 1;
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
for (pos = 0; pos < size * (size / 2) / 8; pos++)
|
|
{
|
|
temp = asc2_1608[(rt_uint16_t)data * size * (size / 2) / 8 + pos];
|
|
for (t = 0; t < 8; t++)
|
|
{
|
|
if (temp & 0x80)colortemp = FORE_COLOR;
|
|
else colortemp = BACK_COLOR;
|
|
font_buf[2 * (8 * pos + t)] = colortemp >> 8;
|
|
font_buf[2 * (8 * pos + t) + 1] = colortemp;
|
|
temp <<= 1;
|
|
}
|
|
}
|
|
rt_pin_write(LCD_DC_PIN, PIN_HIGH);
|
|
rt_spi_send(spi_dev_lcd, font_buf, size * size);
|
|
rt_free(font_buf);
|
|
}
|
|
}
|
|
else
|
|
#endif
|
|
|
|
#ifdef ASC2_2412
|
|
if (size == 24)
|
|
{
|
|
lcd_address_set(x, y, x + size / 2 - 1, y + size - 1);
|
|
|
|
font_buf = (rt_uint8_t *)rt_malloc(size * size);
|
|
if (!font_buf)
|
|
{
|
|
/* fast show char */
|
|
for (pos = 0; pos < (size * 16) / 8; pos++)
|
|
{
|
|
temp = asc2_2412[(rt_uint16_t)data * (size * 16) / 8 + pos];
|
|
if (pos % 2 == 0)
|
|
{
|
|
num = 8;
|
|
}
|
|
else
|
|
{
|
|
num = 4;
|
|
}
|
|
|
|
for (t = 0; t < num; t++)
|
|
{
|
|
if (temp & 0x80)colortemp = FORE_COLOR;
|
|
else colortemp = BACK_COLOR;
|
|
lcd_write_half_word(colortemp);
|
|
temp <<= 1;
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
for (pos = 0; pos < (size * 16) / 8; pos++)
|
|
{
|
|
temp = asc2_2412[(rt_uint16_t)data * (size * 16) / 8 + pos];
|
|
if (pos % 2 == 0)
|
|
{
|
|
num = 8;
|
|
}
|
|
else
|
|
{
|
|
num = 4;
|
|
}
|
|
|
|
for (t = 0; t < num; t++)
|
|
{
|
|
if (temp & 0x80)colortemp = FORE_COLOR;
|
|
else colortemp = BACK_COLOR;
|
|
if (num == 8)
|
|
{
|
|
font_buf[2 * (12 * (pos / 2) + t)] = colortemp >> 8;
|
|
font_buf[2 * (12 * (pos / 2) + t) + 1] = colortemp;
|
|
}
|
|
else
|
|
{
|
|
font_buf[2 * (8 + 12 * (pos / 2) + t)] = colortemp >> 8;
|
|
font_buf[2 * (8 + 12 * (pos / 2) + t) + 1] = colortemp;
|
|
}
|
|
temp <<= 1;
|
|
}
|
|
}
|
|
rt_pin_write(LCD_DC_PIN, PIN_HIGH);
|
|
rt_spi_send(spi_dev_lcd, font_buf, size * size);
|
|
rt_free(font_buf);
|
|
}
|
|
}
|
|
else
|
|
#endif
|
|
|
|
#ifdef ASC2_3216
|
|
if (size == 32)
|
|
{
|
|
lcd_address_set(x, y, x + size / 2 - 1, y + size - 1);
|
|
|
|
font_buf = (rt_uint8_t *)rt_malloc(size * size);
|
|
if (!font_buf)
|
|
{
|
|
/* fast show char */
|
|
for (pos = 0; pos < size * (size / 2) / 8; pos++)
|
|
{
|
|
temp = asc2_3216[(rt_uint16_t)data * size * (size / 2) / 8 + pos];
|
|
for (t = 0; t < 8; t++)
|
|
{
|
|
if (temp & 0x80)colortemp = FORE_COLOR;
|
|
else colortemp = BACK_COLOR;
|
|
lcd_write_half_word(colortemp);
|
|
temp <<= 1;
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
for (pos = 0; pos < size * (size / 2) / 8; pos++)
|
|
{
|
|
temp = asc2_3216[(rt_uint16_t)data * size * (size / 2) / 8 + pos];
|
|
for (t = 0; t < 8; t++)
|
|
{
|
|
if (temp & 0x80)colortemp = FORE_COLOR;
|
|
else colortemp = BACK_COLOR;
|
|
font_buf[2 * (8 * pos + t)] = colortemp >> 8;
|
|
font_buf[2 * (8 * pos + t) + 1] = colortemp;
|
|
temp <<= 1;
|
|
}
|
|
}
|
|
rt_pin_write(LCD_DC_PIN, PIN_HIGH);
|
|
rt_spi_send(spi_dev_lcd, font_buf, size * size);
|
|
rt_free(font_buf);
|
|
}
|
|
}
|
|
else
|
|
#endif
|
|
{
|
|
LOG_E("There is no any define ASC2_1208 && ASC2_2412 && ASC2_2416 && ASC2_3216 !");
|
|
}
|
|
}
|
|
|
|
/**
|
|
* display the number on the lcd.
|
|
*
|
|
* @param x x position
|
|
* @param y y position
|
|
* @param num number
|
|
* @param len length of number
|
|
* @param size size of font
|
|
*
|
|
* @return void
|
|
*/
|
|
void lcd_show_num(rt_uint16_t x, rt_uint16_t y, rt_uint32_t num, rt_uint8_t len, rt_uint32_t size)
|
|
{
|
|
lcd_show_string(x, y, size, "%d", num);
|
|
}
|
|
|
|
/**
|
|
* display the string on the lcd.
|
|
*
|
|
* @param x x position
|
|
* @param y y position
|
|
* @param size size of font
|
|
* @param p the string to be display
|
|
*
|
|
* @return 0: display success
|
|
* -1: size of font is not support
|
|
*/
|
|
rt_err_t lcd_show_string(rt_uint16_t x, rt_uint16_t y, rt_uint32_t size, const char *fmt, ...)
|
|
{
|
|
#define LCD_STRING_BUF_LEN 128
|
|
|
|
va_list args;
|
|
rt_uint8_t buf[LCD_STRING_BUF_LEN] = {0};
|
|
rt_uint8_t *p = RT_NULL;
|
|
|
|
if (size != 16 && size != 24 && size != 32)
|
|
{
|
|
LOG_E("font size(%d) is not support!", size);
|
|
return -RT_ERROR;
|
|
}
|
|
|
|
va_start(args, fmt);
|
|
rt_vsnprintf((char *)buf, 100, (const char *)fmt, args);
|
|
va_end(args);
|
|
|
|
p = buf;
|
|
while (*p != '\0')
|
|
{
|
|
if (x > LCD_W - size / 2)
|
|
{
|
|
x = 0;
|
|
y += size;
|
|
}
|
|
if (y > LCD_H - size)
|
|
{
|
|
y = x = 0;
|
|
lcd_clear(RED);
|
|
}
|
|
lcd_show_char(x, y, *p, size);
|
|
x += size / 2;
|
|
p++;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
/**
|
|
* display the image on the lcd.
|
|
*
|
|
* @param x x position
|
|
* @param y y position
|
|
* @param length length of image
|
|
* @param wide wide of image
|
|
* @param p image
|
|
*
|
|
* @return 0: display success
|
|
* -1: the image is too large
|
|
*/
|
|
rt_err_t lcd_show_image(rt_uint16_t x, rt_uint16_t y, rt_uint16_t length, rt_uint16_t wide, const rt_uint8_t *p)
|
|
{
|
|
RT_ASSERT(p);
|
|
|
|
if (x + length > LCD_W || y + wide > LCD_H)
|
|
{
|
|
return -RT_ERROR;
|
|
}
|
|
|
|
lcd_address_set(x, y, x + length - 1, y + wide - 1);
|
|
|
|
rt_pin_write(LCD_DC_PIN, PIN_HIGH);
|
|
rt_spi_send(spi_dev_lcd, p, length * wide * 2);
|
|
|
|
return RT_EOK;
|
|
} |