rt-thread/bsp/stm32/stm32g070-st-nucleo

STM32G070-Nucleo BSP Introduction

中文

MCU: STM32G070RB @64MHz, 128KB FLASH, 36KB RAM

The STM32G070CB/KB/RB mainstream microcontrollers are based on high-performance Arm® Cortex®-M0+ 32-bit RISC core operating at up to 64 MHz frequency. Offering a high level of integration, they are suitable for a wide range of applications in consumer, industrial and appliance domains and ready for the Internet of Things (IoT) solutions.

The devices incorporate a memory protection unit (MPU), high-speed embedded memories (128 Kbytes of Flash program memory with read protection, write protection, and 36 Kbytes of SRAM), DMA and an extensive range of system functions, enhanced I/Os and peripherals. The devices offer standard communication interfaces (two I2Cs, two SPIs / one I2S, and four USARTs), one 12-bit ADC (2.5 MSps) with up to 19 channels, a low-power RTC, an advanced control PWM timer, five general-purpose 16-bit timers, two basic timers, two watchdog timers, and a SysTick timer. The devices operate within ambient temperatures from -40 to 85°C. They can operate with supply voltages from 2.0 V to 3.6 V. Optimized dynamic consumption combined with a comprehensive set of power-saving modes allows the design of low-power applications. VBAT direct battery input allows keeping RTC and backup registers powered. The devices come in packages with 32 to 64 pins.

KEY FEATURES

• Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz

• -40°C to 85°C operating temperature

• Memories

  • 128 Kbytes of Flash memory with protection
  • 36 Kbytes of SRAM (32 Kbytes with HW parity check)

• CRC calculation unit

• Reset and power management

  • Voltage range: 2.0 V to 3.6 V
  • Power-on/Power-down reset (POR/PDR)
  • Low-power modes:Sleep, Stop, Standby
  • VBAT supply for RTC and backup registers

• Clock management

  • 4 to 48 MHz crystal oscillator
  • 32 kHz crystal oscillator with calibration
  • Internal 16 MHz RC with PLL option
  • Internal 32 kHz RC oscillator (±5 %)

• Up to 59 fast I/Os

  • All mappable on external interrupt vectors
  • Multiple 5 V-tolerant I/Os

• 7-channel DMA controller with flexible mapping

• 12-bit, 0.4 µs ADC (up to 16 ext. channels)

  • Up to 16-bit with hardware oversampling
  • Conversion range: 0 to 3.6V

• 11 timers: 16-bit for advanced motor control, five 16-bit general-purpose, two basic 16-bit, two watchdogs, SysTick timer

• Calendar RTC with alarm and periodic wakeup from Stop/Standby

• Communication interfaces

  • Two I2C-bus interfaces supporting Fast-mode Plus (1 Mbit/s) with extra current sink, one supporting SMBus/PMBus and wakeup from Stop mode
  • Four USARTs with master/slave synchronous SPI; two supporting ISO7816 interface, LIN, IrDA capability, auto baud rate detection and wakeup feature
  • Two SPIs (32 Mbit/s) with 4- to 16-bit programmable bitframe, one multiplexed with I2S interface

• Development support: serial wire debug (SWD)

• All packages ECOPACK 2 compliant

Read more

Documents	Description
STM32_Nucleo-64_BSP_Introduction	How to run RT-Thread on STM32 Nucleo-64 boards (Must-Read)
STM32G070RB ST Official Website	STM32G070RB datasheet and other resources

Maintained By

NU-LL

Translated By

Meco Man @ RT-Thread Community

jiantingman@foxmail.com

https://github.com/mysterywolf