rt-thread/bsp/xplorer4330/libraries/lpc_ip/enet_001.h

609 lines
27 KiB
C

/*
* @brief Ethernet control functions
*
* @note
* Copyright(C) NXP Semiconductors, 2012
* All rights reserved.
*
* @par
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* LPC products. This software is supplied "AS IS" without any warranties of
* any kind, and NXP Semiconductors and its licensor disclaim any and
* all warranties, express or implied, including all implied warranties of
* merchantability, fitness for a particular purpose and non-infringement of
* intellectual property rights. NXP Semiconductors assumes no responsibility
* or liability for the use of the software, conveys no license or rights under any
* patent, copyright, mask work right, or any other intellectual property rights in
* or to any products. NXP Semiconductors reserves the right to make changes
* in the software without notification. NXP Semiconductors also makes no
* representation or warranty that such application will be suitable for the
* specified use without further testing or modification.
*
* @par
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors' and its
* licensor's relevant copyrights in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
*/
#ifndef __ENET_001_H_
#define __ENET_001_H_
#include "sys_config.h"
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
/** @defgroup IP_ENET_001 IP: Ethernet register block and driver
* @ingroup IP_Drivers
* @{
*/
/**
* @brief 10/100 MII & RMII Ethernet with timestamping register block structure
*/
typedef struct { /*!< ETHERNET Structure */
__IO uint32_t MAC_CONFIG; /*!< MAC configuration register */
__IO uint32_t MAC_FRAME_FILTER; /*!< MAC frame filter */
__IO uint32_t MAC_HASHTABLE_HIGH; /*!< Hash table high register */
__IO uint32_t MAC_HASHTABLE_LOW; /*!< Hash table low register */
__IO uint32_t MAC_MII_ADDR; /*!< MII address register */
__IO uint32_t MAC_MII_DATA; /*!< MII data register */
__IO uint32_t MAC_FLOW_CTRL; /*!< Flow control register */
__IO uint32_t MAC_VLAN_TAG; /*!< VLAN tag register */
__I uint32_t RESERVED0;
__I uint32_t MAC_DEBUG; /*!< Debug register */
__IO uint32_t MAC_RWAKE_FRFLT; /*!< Remote wake-up frame filter */
__IO uint32_t MAC_PMT_CTRL_STAT; /*!< PMT control and status */
__I uint32_t RESERVED1[2];
__I uint32_t MAC_INTR; /*!< Interrupt status register */
__IO uint32_t MAC_INTR_MASK; /*!< Interrupt mask register */
__IO uint32_t MAC_ADDR0_HIGH; /*!< MAC address 0 high register */
__IO uint32_t MAC_ADDR0_LOW; /*!< MAC address 0 low register */
__I uint32_t RESERVED2[430];
__IO uint32_t MAC_TIMESTP_CTRL; /*!< Time stamp control register */
__IO uint32_t SUBSECOND_INCR; /*!< Sub-second increment register */
__I uint32_t SECONDS; /*!< System time seconds register */
__I uint32_t NANOSECONDS; /*!< System time nanoseconds register */
__IO uint32_t SECONDSUPDATE; /*!< System time seconds update register */
__IO uint32_t NANOSECONDSUPDATE; /*!< System time nanoseconds update register */
__IO uint32_t ADDEND; /*!< Time stamp addend register */
__IO uint32_t TARGETSECONDS; /*!< Target time seconds register */
__IO uint32_t TARGETNANOSECONDS; /*!< Target time nanoseconds register */
__IO uint32_t HIGHWORD; /*!< System time higher word seconds register */
__I uint32_t TIMESTAMPSTAT; /*!< Time stamp status register */
__IO uint32_t PPSCTRL; /*!< PPS control register */
__I uint32_t AUXNANOSECONDS; /*!< Auxiliary time stamp nanoseconds register */
__I uint32_t AUXSECONDS; /*!< Auxiliary time stamp seconds register */
__I uint32_t RESERVED3[562];
__IO uint32_t DMA_BUS_MODE; /*!< Bus Mode Register */
__IO uint32_t DMA_TRANS_POLL_DEMAND; /*!< Transmit poll demand register */
__IO uint32_t DMA_REC_POLL_DEMAND; /*!< Receive poll demand register */
__IO uint32_t DMA_REC_DES_ADDR; /*!< Receive descriptor list address register */
__IO uint32_t DMA_TRANS_DES_ADDR; /*!< Transmit descriptor list address register */
__IO uint32_t DMA_STAT; /*!< Status register */
__IO uint32_t DMA_OP_MODE; /*!< Operation mode register */
__IO uint32_t DMA_INT_EN; /*!< Interrupt enable register */
__I uint32_t DMA_MFRM_BUFOF; /*!< Missed frame and buffer overflow register */
__IO uint32_t DMA_REC_INT_WDT; /*!< Receive interrupt watchdog timer register */
__I uint32_t RESERVED4[8];
__I uint32_t DMA_CURHOST_TRANS_DES; /*!< Current host transmit descriptor register */
__I uint32_t DMA_CURHOST_REC_DES; /*!< Current host receive descriptor register */
__I uint32_t DMA_CURHOST_TRANS_BUF; /*!< Current host transmit buffer address register */
__I uint32_t DMA_CURHOST_REC_BUF; /*!< Current host receive buffer address register */
} IP_ENET_001_Type;
/**
* @brief MAC_CONFIG register bit defines
*/
#define MAC_CFG_RE (1 << 2) /*!< Receiver enable */
#define MAC_CFG_TE (1 << 3) /*!< Transmitter Enable */
#define MAC_CFG_DF (1 << 4) /*!< Deferral Check */
#define MAC_CFG_BL(n) ((n) << 5) /*!< Back-Off Limit */
#define MAC_CFG_ACS (1 << 7) /*!< Automatic Pad/CRC Stripping */
#define MAC_CFG_LUD (1 << 8) /*!< Link Up/Down, 1 = up */
#define MAC_CFG_DR (1 << 9) /*!< Disable Retry */
#define MAC_CFG_IPC (1 << 10) /*!< Checksum Offload */
#define MAC_CFG_DM (1 << 11) /*!< Duplex Mode, 1 = full, 0 = half */
#define MAC_CFG_LM (1 << 12) /*!< Loopback Mode */
#define MAC_CFG_DO (1 << 13) /*!< Disable Receive Own */
#define MAC_CFG_FES (1 << 14) /*!< Speed, 1 = 100Mbps, 0 = 10Mbos */
#define MAC_CFG_PS (1 << 15) /*!< Port select, must always be 1 */
#define MAC_CFG_DCRS (1 << 16) /*!< Disable carrier sense during transmission */
#define MAC_CFG_IFG(n) ((n) << 17) /*!< Inter-frame gap, 40..96, n incs by 8 */
#define MAC_CFG_JE (1 << 20) /*!< Jumbo Frame Enable */
#define MAC_CFG_JD (1 << 22) /*!< Jabber Disable */
#define MAC_CFG_WD (1 << 23) /*!< Watchdog Disable */
/**
* @brief MAC_FRAME_FILTER register bit defines
*/
#define MAC_FF_PR (1 << 0) /*!< Promiscuous Mode */
#define MAC_FF_DAIF (1 << 3) /*!< DA Inverse Filtering */
#define MAC_FF_PM (1 << 4) /*!< Pass All Multicast */
#define MAC_FF_DBF (1 << 5) /*!< Disable Broadcast Frames */
#define MAC_FF_PCF(n) ((n) << 6) /*!< Pass Control Frames, n = see user manual */
#define MAC_FF_SAIF (1 << 8) /*!< SA Inverse Filtering */
#define MAC_FF_SAF (1 << 9) /*!< Source Address Filter Enable */
#define MAC_FF_RA (1UL << 31) /*!< Receive all */
/**
* @brief MAC_MII_ADDR register bit defines
*/
#define MAC_MIIA_GB (1 << 0) /*!< MII busy */
#define MAC_MIIA_W (1 << 1) /*!< MII write */
#define MAC_MIIA_CR(n) ((n) << 2) /*!< CSR clock range, n = see manual */
#define MAC_MIIA_GR(n) ((n) << 6) /*!< MII register. n = 0..31 */
#define MAC_MIIA_PA(n) ((n) << 11) /*!< Physical layer address, n = 0..31 */
/**
* @brief MAC_MII_DATA register bit defines
*/
#define MAC_MIID_GDMSK (0xFFFF) /*!< MII data mask */
/**
* @brief MAC_FLOW_CONTROL register bit defines
*/
#define MAC_FC_FCB (1 << 0) /*!< Flow Control Busy/Backpressure Activate */
#define MAC_FC_TFE (1 << 1) /*!< Transmit Flow Control Enable */
#define MAC_FC_RFE (1 << 2) /*!< Receive Flow Control Enable */
#define MAC_FC_UP (1 << 3) /*!< Unicast Pause Frame Detect */
#define MAC_FC_PLT(n) ((n) << 4) /*!< Pause Low Threshold, n = see manual */
#define MAC_FC_DZPQ (1 << 7) /*!< Disable Zero-Quanta Pause */
#define MAC_FC_PT(n) ((n) << 16) /*!< Pause time */
/**
* @brief MAC_VLAN_TAG register bit defines
*/
#define MAC_VT_VL(n) ((n) << 0) /*!< VLAN Tag Identifier for Receive Frames */
#define MAC_VT_ETC (1 << 7) /*!< Enable 12-Bit VLAN Tag Comparison */
/**
* @brief MAC_PMT_CTRL_STAT register bit defines
*/
#define MAC_PMT_PD (1 << 0) /*!< Power-down */
#define MAC_PMT_MPE (1 << 1) /*!< Magic packet enable */
#define MAC_PMT_WFE (1 << 2) /*!< Wake-up frame enable */
#define MAC_PMT_MPR (1 << 5) /*!< Magic Packet Received */
#define MAC_PMT_WFR (1 << 6) /*!< Wake-up Frame Received */
#define MAC_PMT_GU (1 << 9) /*!< Global Unicast */
#define MAC_PMT_WFFRPR (1UL << 31) /*!< Wake-up Frame Filter Register Pointer Reset */
/**
* @brief MAC_INTR_MASK register bit defines
*/
#define MAC_IM_PMT (1 << 3) /*!< PMT Interrupt Mask */
/**
* @brief MAC_ADDR0_HIGH register bit defines
*/
#define MAC_ADRH_MO (1UL << 31) /*!< Always 1 when writing register */
/**
* @brief MAC_ADDR0_HIGH register bit defines
*/
#define MAC_ADRH_MO (1UL << 31) /*!< Always 1 when writing register */
/**
* @brief MAC_TIMESTAMP register bit defines
*/
#define MAC_TS_TSENA (1 << 0) /*!< Time Stamp Enable */
#define MAC_TS_TSCFUP (1 << 1) /*!< Time Stamp Fine or Coarse Update */
#define MAC_TS_TSINIT (1 << 2) /*!< Time Stamp Initialize */
#define MAC_TS_TSUPDT (1 << 3) /*!< Time Stamp Update */
#define MAC_TS_TSTRIG (1 << 4) /*!< Time Stamp Interrupt Trigger Enable */
#define MAC_TS_TSADDR (1 << 5) /*!< Addend Reg Update */
#define MAC_TS_TSENAL (1 << 8) /*!< Enable Time Stamp for All Frames */
#define MAC_TS_TSCTRL (1 << 9) /*!< Time Stamp Digital or Binary rollover control */
#define MAC_TS_TSVER2 (1 << 10) /*!< Enable PTP packet snooping for version 2 format */
#define MAC_TS_TSIPENA (1 << 11) /*!< Enable Time Stamp Snapshot for PTP over Ethernet frames */
#define MAC_TS_TSIPV6E (1 << 12) /*!< Enable Time Stamp Snapshot for IPv6 frames */
#define MAC_TS_TSIPV4E (1 << 13) /*!< Enable Time Stamp Snapshot for IPv4 frames */
#define MAC_TS_TSEVNT (1 << 14) /*!< Enable Time Stamp Snapshot for Event Messages */
#define MAC_TS_TSMSTR (1 << 15) /*!< Enable Snapshot for Messages Relevant to Master */
#define MAC_TS_TSCLKT(n) ((n) << 16) /*!< Select the type of clock node, n = see menual */
#define MAC_TS_TSENMA (1 << 18) /*!< Enable MAC address for PTP frame filtering */
/**
* @brief DMA_BUS_MODE register bit defines
*/
#define DMA_BM_SWR (1 << 0) /*!< Software reset */
#define DMA_BM_DA (1 << 1) /*!< DMA arbitration scheme, 1 = TX has priority over TX */
#define DMA_BM_DSL(n) ((n) << 2) /*!< Descriptor skip length, n = see manual */
#define DMA_BM_ATDS (1 << 7) /*!< Alternate (Enhanced) descriptor size */
#define DMA_BM_PBL(n) ((n) << 8) /*!< Programmable burst length, n = see manual */
#define DMA_BM_PR(n) ((n) << 14) /*!< Rx-to-Tx priority ratio, n = see manual */
#define DMA_BM_FB (1 << 16) /*!< Fixed burst */
#define DMA_BM_RPBL(n) ((n) << 17) /*!< RxDMA PBL, n = see manual */
#define DMA_BM_USP (1 << 23) /*!< Use separate PBL */
#define DMA_BM_PBL8X (1 << 24) /*!< 8 x PBL mode */
#define DMA_BM_AAL (1 << 25) /*!< Address-aligned beats */
#define DMA_BM_MB (1 << 26) /*!< Mixed burst */
#define DMA_BM_TXPR (1 << 27) /*!< Transmit DMA has higher priority than receive DMA */
/**
* @brief DMA_STAT register bit defines
*/
#define DMA_ST_TI (1 << 0) /*!< Transmit interrupt */
#define DMA_ST_TPS (1 << 1) /*!< Transmit process stopped */
#define DMA_ST_TU (1 << 2) /*!< Transmit buffer unavailable */
#define DMA_ST_TJT (1 << 3) /*!< Transmit jabber timeout */
#define DMA_ST_OVF (1 << 4) /*!< Receive overflow */
#define DMA_ST_UNF (1 << 5) /*!< Transmit underflow */
#define DMA_ST_RI (1 << 6) /*!< Receive interrupt */
#define DMA_ST_RU (1 << 7) /*!< Receive buffer unavailable */
#define DMA_ST_RPS (1 << 8) /*!< Received process stopped */
#define DMA_ST_RWT (1 << 9) /*!< Receive watchdog timeout */
#define DMA_ST_ETI (1 << 10) /*!< Early transmit interrupt */
#define DMA_ST_FBI (1 << 13) /*!< Fatal bus error interrupt */
#define DMA_ST_ERI (1 << 14) /*!< Early receive interrupt */
#define DMA_ST_AIE (1 << 15) /*!< Abnormal interrupt summary */
#define DMA_ST_NIS (1 << 16) /*!< Normal interrupt summary */
#define DMA_ST_ALL (0x1E7FF) /*!< All interrupts */
/**
* @brief DMA_OP_MODE register bit defines
*/
#define DMA_OM_SR (1 << 1) /*!< Start/stop receive */
#define DMA_OM_OSF (1 << 2) /*!< Operate on second frame */
#define DMA_OM_RTC(n) ((n) << 3) /*!< Receive threshold control, n = see manual */
#define DMA_OM_FUF (1 << 6) /*!< Forward undersized good frames */
#define DMA_OM_FEF (1 << 7) /*!< Forward error frames */
#define DMA_OM_ST (1 << 13) /*!< Start/Stop Transmission Command */
#define DMA_OM_TTC(n) ((n) << 14) /*!< Transmit threshold control, n = see manual */
#define DMA_OM_FTF (1 << 20) /*!< Flush transmit FIFO */
#define DMA_OM_TSF (1 << 21) /*!< Transmit store and forward */
#define DMA_OM_DFF (1 << 24) /*!< Disable flushing of received frames */
#define DMA_OM_RSF (1 << 25) /*!< Receive store and forward */
#define DMA_OM_DT (1 << 26) /*!< Disable Dropping of TCP/IP Checksum Error Frames */
/**
* @brief DMA_INT_EN register bit defines
*/
#define DMA_IE_TIE (1 << 0) /*!< Transmit interrupt enable */
#define DMA_IE_TSE (1 << 1) /*!< Transmit stopped enable */
#define DMA_IE_TUE (1 << 2) /*!< Transmit buffer unavailable enable */
#define DMA_IE_TJE (1 << 3) /*!< Transmit jabber timeout enable */
#define DMA_IE_OVE (1 << 4) /*!< Overflow interrupt enable */
#define DMA_IE_UNE (1 << 5) /*!< Underflow interrupt enable */
#define DMA_IE_RIE (1 << 6) /*!< Receive interrupt enable */
#define DMA_IE_RUE (1 << 7) /*!< Receive buffer unavailable enable */
#define DMA_IE_RSE (1 << 8) /*!< Received stopped enable */
#define DMA_IE_RWE (1 << 9) /*!< Receive watchdog timeout enable */
#define DMA_IE_ETE (1 << 10) /*!< Early transmit interrupt enable */
#define DMA_IE_FBE (1 << 13) /*!< Fatal bus error enable */
#define DMA_IE_ERE (1 << 14) /*!< Early receive interrupt enable */
#define DMA_IE_AIE (1 << 15) /*!< Abnormal interrupt summary enable */
#define DMA_IE_NIE (1 << 16) /*!< Normal interrupt summary enable */
/**
* @brief DMA_MFRM_BUFOF register bit defines
*/
#define DMA_MFRM_FMCMSK (0xFFFF) /*!< Number of frames missed mask */
#define DMA_MFRM_OC (1 << 16) /*!< Overflow bit for missed frame counter */
#define DMA_MFRM_FMA(n) (((n) & 0x0FFE0000) >> 17) /*!< Number of frames missed by the application mask/shift */
#define DMA_MFRM_OF (1 << 28) /*!< Overflow bit for FIFO overflow counter */
/**
* @brief Common TRAN_DESC_T and TRAN_DESC_ENH_T CTRLSTAT field bit defines
*/
#define TDES_DB (1 << 0) /*!< Deferred Bit */
#define TDES_UF (1 << 1) /*!< Underflow Error */
#define TDES_ED (1 << 2) /*!< Excessive Deferral */
#define TDES_CCMSK(n) (((n) & 0x000000F0) >> 3)/*!< CC: Collision Count (Status field) mask and shift */
#define TDES_VF (1 << 7) /*!< VLAN Frame */
#define TDES_EC (1 << 8) /*!< Excessive Collision */
#define TDES_LC (1 << 9) /*!< Late Collision */
#define TDES_NC (1 << 10) /*!< No Carrier */
#define TDES_LCAR (1 << 11) /*!< Loss of Carrier */
#define TDES_IPE (1 << 12) /*!< IP Payload Error */
#define TDES_FF (1 << 13) /*!< Frame Flushed */
#define TDES_JT (1 << 14) /*!< Jabber Timeout */
#define TDES_ES (1 << 15) /*!< Error Summary */
#define TDES_IHE (1 << 16) /*!< IP Header Error */
#define TDES_TTSS (1 << 17) /*!< Transmit Timestamp Status */
#define TDES_OWN (1UL << 31) /*!< Own Bit */
/**
* @brief TRAN_DESC_ENH_T only CTRLSTAT field bit defines
*/
#define TDES_ENH_IC (1UL << 30) /*!< Interrupt on Completion, enhanced descriptor */
#define TDES_ENH_LS (1 << 29) /*!< Last Segment, enhanced descriptor */
#define TDES_ENH_FS (1 << 28) /*!< First Segment, enhanced descriptor */
#define TDES_ENH_DC (1 << 27) /*!< Disable CRC, enhanced descriptor */
#define TDES_ENH_DP (1 << 26) /*!< Disable Pad, enhanced descriptor */
#define TDES_ENH_TTSE (1 << 25) /*!< Transmit Timestamp Enable, enhanced descriptor */
#define TDES_ENH_CIC(n) ((n) << 22) /*!< Checksum Insertion Control, enhanced descriptor */
#define TDES_ENH_TER (1 << 21) /*!< Transmit End of Ring, enhanced descriptor */
#define TDES_ENH_TCH (1 << 20) /*!< Second Address Chained, enhanced descriptor */
/**
* @brief TRAN_DESC_T only BSIZE field bit defines
*/
#define TDES_NORM_IC (1UL << 31) /*!< Interrupt on Completion, normal descriptor */
#define TDES_NORM_FS (1 << 30) /*!< First Segment, normal descriptor */
#define TDES_NORM_LS (1 << 29) /*!< Last Segment, normal descriptor */
#define TDES_NORM_CIC(n) ((n) << 27) /*!< Checksum Insertion Control, normal descriptor */
#define TDES_NORM_DC (1 << 26) /*!< Disable CRC, normal descriptor */
#define TDES_NORM_TER (1 << 25) /*!< Transmit End of Ring, normal descriptor */
#define TDES_NORM_TCH (1 << 24) /*!< Second Address Chained, normal descriptor */
#define TDES_NORM_DP (1 << 23) /*!< Disable Pad, normal descriptor */
#define TDES_NORM_TTSE (1 << 22) /*!< Transmit Timestamp Enable, normal descriptor */
#define TDES_NORM_BS2(n) (((n) & 0x3FF) << 11) /*!< Buffer 2 size, normal descriptor */
#define TDES_NORM_BS1(n) (((n) & 0x3FF) << 0) /*!< Buffer 1 size, normal descriptor */
/**
* @brief TRAN_DESC_ENH_T only BSIZE field bit defines
*/
#define TDES_ENH_BS2(n) (((n) & 0xFFF) << 16) /*!< Buffer 2 size, enhanced descriptor */
#define TDES_ENH_BS1(n) (((n) & 0xFFF) << 0) /*!< Buffer 1 size, enhanced descriptor */
/**
* @brief Common REC_DESC_T and REC_DESC_ENH_T STATUS field bit defines
*/
#define RDES_ESA (1 << 0) /*!< Extended Status Available/Rx MAC Address */
#define RDES_CE (1 << 1) /*!< CRC Error */
#define RDES_DRE (1 << 2) /*!< Dribble Bit Error */
#define RDES_RE (1 << 3) /*!< Receive Error */
#define RDES_RWT (1 << 4) /*!< Receive Watchdog Timeout */
#define RDES_FT (1 << 5) /*!< Frame Type */
#define RDES_LC (1 << 6) /*!< Late Collision */
#define RDES_TSA (1 << 7) /*!< Timestamp Available/IP Checksum Error (Type1) /Giant Frame */
#define RDES_LS (1 << 8) /*!< Last Descriptor */
#define RDES_FS (1 << 9) /*!< First Descriptor */
#define RDES_VLAN (1 << 10) /*!< VLAN Tag */
#define RDES_OE (1 << 11) /*!< Overflow Error */
#define RDES_LE (1 << 12) /*!< Length Error */
#define RDES_SAF (1 << 13) /*!< Source Address Filter Fail */
#define RDES_DE (1 << 14) /*!< Descriptor Error */
#define RDES_ES (1 << 15) /*!< ES: Error Summary */
#define RDES_FLMSK(n) (((n) & 0x3FFF0000) >> 16)/*!< Frame Length mask and shift */
#define RDES_AFM (1 << 30) /*!< Destination Address Filter Fail */
#define RDES_OWN (1UL << 31) /*!< Own Bit */
/**
* @brief Common REC_DESC_T and REC_DESC_ENH_T CTRL field bit defines
*/
#define RDES_DINT (1UL << 31) /*!< Disable interrupt on completion */
/**
* @brief REC_DESC_T pnly CTRL field bit defines
*/
#define RDES_NORM_RER (1 << 25) /*!< Receive End of Ring, normal descriptor */
#define RDES_NORM_RCH (1 << 24) /*!< Second Address Chained, normal descriptor */
#define RDES_NORM_BS2(n) (((n) & 0x3FF) << 11) /*!< Buffer 2 size, normal descriptor */
#define RDES_NORM_BS1(n) (((n) & 0x3FF) << 0) /*!< Buffer 1 size, normal descriptor */
/**
* @brief REC_DESC_ENH_T only CTRL field bit defines
*/
#define RDES_ENH_RER (1 << 15) /*!< Receive End of Ring, enhanced descriptor */
#define RDES_ENH_RCH (1 << 14) /*!< Second Address Chained, enhanced descriptor */
#define RDES_ENH_BS2(n) (((n) & 0xFFF) << 16) /*!< Buffer 2 size, enhanced descriptor */
#define RDES_ENH_BS1(n) (((n) & 0xFFF) << 0) /*!< Buffer 1 size, enhanced descriptor */
/**
* @brief REC_DESC_ENH_T only EXTSTAT field bit defines
*/
#define RDES_ENH_IPPL(n) (((n) & 0x7) >> 2) /*!< IP Payload Type mask and shift, enhanced descripto */
#define RDES_ENH_IPHE (1 << 3) /*!< IP Header Error, enhanced descripto */
#define RDES_ENH_IPPLE (1 << 4) /*!< IP Payload Error, enhanced descripto */
#define RDES_ENH_IPCSB (1 << 5) /*!< IP Checksum Bypassed, enhanced descripto */
#define RDES_ENH_IPV4 (1 << 6) /*!< IPv4 Packet Received, enhanced descripto */
#define RDES_ENH_IPV6 (1 << 7) /*!< IPv6 Packet Received, enhanced descripto */
#define RDES_ENH_MTMSK(n) (((n) & 0xF) >> 8) /*!< Message Type mask and shift, enhanced descripto */
/**
* @brief Maximum size of an ethernet buffer
*/
#define EMAC_ETH_MAX_FLEN (1536)
/**
* @brief Structure of a transmit descriptor (without timestamp)
*/
typedef struct {
__IO uint32_t CTRLSTAT; /*!< TDES control and status word */
__IO uint32_t BSIZE; /*!< Buffer 1/2 byte counts */
__IO uint32_t B1ADD; /*!< Buffer 1 address */
__IO uint32_t B2ADD; /*!< Buffer 2 or next descriptor address */
} IP_ENET_001_TXDESC_Type;
/**
* @brief Structure of a enhanced transmit descriptor (with timestamp)
*/
typedef struct {
__IO uint32_t CTRLSTAT; /*!< TDES control and status word */
__IO uint32_t BSIZE; /*!< Buffer 1/2 byte counts */
__IO uint32_t B1ADD; /*!< Buffer 1 address */
__IO uint32_t B2ADD; /*!< Buffer 2 or next descriptor address */
__IO uint32_t TDES4; /*!< Reserved */
__IO uint32_t TDES5; /*!< Reserved */
__IO uint32_t TTSL; /*!< Timestamp value low */
__IO uint32_t TTSH; /*!< Timestamp value high */
} IP_ENET_001_ENHTXDESC_Type;
/**
* @brief Structure of a receive descriptor (without timestamp)
*/
typedef struct {
__IO uint32_t STATUS; /*!< RDES status word */
__IO uint32_t CTRL; /*!< Buffer 1/2 byte counts and control */
__IO uint32_t B1ADD; /*!< Buffer 1 address */
__IO uint32_t B2ADD; /*!< Buffer 2 or next descriptor address */
} IP_ENET_001_RXDESC_Type;
/**
* @brief Structure of a enhanced receive descriptor (with timestamp)
*/
typedef struct {
__IO uint32_t STATUS; /*!< RDES status word */
__IO uint32_t CTRL; /*!< Buffer 1/2 byte counts */
__IO uint32_t B1ADD; /*!< Buffer 1 address */
__IO uint32_t B2ADD; /*!< Buffer 2 or next descriptor address */
__IO uint32_t EXTSTAT; /*!< Extended Status */
__IO uint32_t RDES5; /*!< Reserved */
__IO uint32_t RTSL; /*!< Timestamp value low */
__IO uint32_t RTSH; /*!< Timestamp value high */
} IP_ENET_001_ENHRXDESC_Type;
/**
* @brief Resets the ethernet interface
* @param LPC_ENET : Pointer to selected ENET peripheral
* @return Nothing
* Resets the ethernet interface. This should be called prior to
* IP_ENET_Init with a small delay after this call.
*/
void IP_ENET_Reset(IP_ENET_001_Type *LPC_ENET);
/**
* @brief Sets the address of the interface
* @param LPC_ENET : Pointer to selected ENET peripheral
* @param macAddr : Pointer to the 6 bytes used for the MAC address
* @return Nothing
*/
void IP_ENET_SetADDR(IP_ENET_001_Type *LPC_ENET, const uint8_t *macAddr);
/**
* @brief Initialize ethernet interface
* @param LPC_ENET : Pointer to selected ENET peripheral
* @return Nothing
* Performs basic initialization of the ethernet interface in a default
* state. This is enough to place the interface in a usable state, but
* may require more setup outside this function.
*/
void IP_ENET_Init(IP_ENET_001_Type *LPC_ENET);
/**
* @brief Sets up the PHY link clock divider and PHY address
* @param LPC_ENET : Pointer to selected ENET peripheral
* @param div : Divider value, may vary per chip
* @param addr : PHY address, used with MII read and write
* @return Nothing
*/
void IP_ENET_SetupMII(IP_ENET_001_Type *LPC_ENET, uint32_t div, uint8_t addr);
/**
* @brief De-initialize the ethernet interface
* @param LPC_ENET : Pointer to selected ENET peripheral
* @return Nothing
*/
void IP_ENET_DeInit(IP_ENET_001_Type *LPC_ENET);
/**
* @brief Starts a PHY write via the MII
* @param LPC_ENET : Pointer to selected ENET peripheral
* @param reg : PHY register to write
* @param data : Data to write to PHY register
* @return Nothing
* Start a PHY write operation. Does not block, requires calling
* IP_ENET_IsMIIBusy to determine when write is complete.
*/
void IP_ENET_StartMIIWrite(IP_ENET_001_Type *LPC_ENET, uint8_t reg, uint16_t data);
/**
* @brief Starts a PHY read via the MII
* @param LPC_ENET : Pointer to selected ENET peripheral
* @param reg : PHY register to read
* @return Nothing
* Start a PHY read operation. Does not block, requires calling
* IP_ENET_IsMIIBusy to determine when read is complete and calling
* IP_ENET_ReadMIIData to get the data.
*/
void IP_ENET_StartMIIRead(IP_ENET_001_Type *LPC_ENET, uint8_t reg);
/**
* @brief Returns MII link (PHY) busy status
* @param LPC_ENET : Pointer to selected ENET peripheral
* @return Returns true if busy, otherwise false
*/
bool IP_ENET_IsMIIBusy(IP_ENET_001_Type *LPC_ENET);
/**
* @brief Returns the value read from the PHY
* @param LPC_ENET : Pointer to selected ENET peripheral
* @return Read value from PHY
*/
STATIC INLINE uint16_t IP_ENET_ReadMIIData(IP_ENET_001_Type *LPC_ENET)
{
return LPC_ENET->MAC_MII_DATA;
}
/**
* @brief Enables or disables ethernet transmit
* @param LPC_ENET : Pointer to selected ENET peripheral
* @param Enable : true to enable transmit, false to disable
* @return Nothing
*/
void IP_ENET_TXEnable(IP_ENET_001_Type *LPC_ENET, bool Enable);
/**
* @brief Enables or disables ethernet packet reception
* @param LPC_ENET : Pointer to selected ENET peripheral
* @param Enable : true to enable receive, false to disable
* @return Nothing
*/
void IP_ENET_RXEnable(IP_ENET_001_Type *LPC_ENET, bool Enable);
/**
* @brief Sets full or half duplex for the interface
* @param LPC_ENET : Pointer to selected ENET peripheral
* @param full : true to selected full duplex, false for half
* @return Nothing
*/
void IP_ENET_SetDuplex(IP_ENET_001_Type *LPC_ENET, bool full);
/**
* @brief Sets speed for the interface
* @param LPC_ENET : Pointer to selected ENET peripheral
* @param speed100 : true to select 100Mbps mode, false for 10Mbps
* @return Nothing
*/
void IP_ENET_SetSpeed(IP_ENET_001_Type *LPC_ENET, bool speed100);
/**
* @brief Configures the initial ethernet descriptors
* @param LPC_ENET : Pointer to selected ENET peripheral
* @param pTXDescs : Pointer to TX descriptor list
* @param pRXDescs : Pointer to RX descriptor list
* @return Nothing
*/
void IP_ENET_InitDescriptors(IP_ENET_001_Type *LPC_ENET,
IP_ENET_001_ENHTXDESC_Type *pTXDescs, IP_ENET_001_ENHRXDESC_Type *pRXDescs);
/**
* @brief Starts receive polling of RX descriptors
* @param LPC_ENET : Pointer to selected ENET peripheral
* @return Nothing
*/
STATIC INLINE void IP_ENET_RXStart(IP_ENET_001_Type *LPC_ENET)
{
/* Start receive polling */
LPC_ENET->DMA_REC_POLL_DEMAND = 1;
}
/**
* @brief Starts transmit polling of TX descriptors
* @param LPC_ENET : Pointer to selected ENET peripheral
* @return Nothing
*/
STATIC INLINE void IP_ENET_TXStart(IP_ENET_001_Type *LPC_ENET)
{
/* Start transmit polling */
LPC_ENET->DMA_TRANS_POLL_DEMAND = 1;
}
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __ENET_001_H_ */