322 lines
14 KiB
Plaintext
322 lines
14 KiB
Plaintext
|
|
2007-08-28 (REL_1_4_0) Christian Walter <wolti@sil.at>:
|
|
Notes: Added support for HCS08. Fixed some small bugs in the documentation
|
|
for the porting layer.
|
|
|
|
Detailed notes:
|
|
- FEATURES (HCS08) : Added new port.
|
|
- BUGS (ALL) : Fixed some small bugs in the porting guide.
|
|
|
|
2007-07-17 (REL_1_3_0) Christian Walter <wolti@sil.at>:
|
|
Notes: Added ARM7/AT91SAM7X port. Added Linux/TCP port from Steven Guo.
|
|
|
|
Detailed notes:
|
|
- FEATURES (ARM7): Added ARM7/AT91SAM7x port.
|
|
- FEATURES (LINUX): Added Linux/TCP port from Steven Guo.
|
|
- BUGS (ALL): Fixed bug in <eMBFuncReadInputRegister> where the high
|
|
byte of the register count was ignored. This does not have a
|
|
practical impact because the actual number of registers is always
|
|
lower.
|
|
|
|
2007-07-17 (REL_1_3_0) Christian Walter <wolti@sil.at>:
|
|
Notes: Added Linux/TCP port. Fixed bug in MSP430 port.
|
|
Detailted notes:
|
|
- FEATURE (LINUX): Added Linux/TCP port.
|
|
- BUGS (MSP430): Fixed bug with calculating the timer value.
|
|
|
|
2007-04-25 (REL_1_2_0) Christian Walter <wolti@sil.at>:
|
|
Notes: Added LPC214X ARM port with Keil compiler. Added Z8Encore port for
|
|
Z8F6422 microcontroller.
|
|
|
|
Detailed notes:
|
|
- FEATURE (ARM): Added LPC214X ARM port for Keil ARM 2.41.
|
|
- FEATURE (Z8ENCORE): Added Z8F6422 for Z8Encore using the ZDS II - Z8
|
|
Encore! development tools.
|
|
|
|
2007-02-18 (REL_1_1_2) Christian Walter <wolti@sil.at>:
|
|
Notes: Fixed typo with the defined defining the supported Modbus
|
|
functions. Fixed bug when illegal slave address was passed to eMBInit
|
|
where the error was not detected. Fixed typo in the holding registers
|
|
where the frame for write multiple registers was parsed with the wrong
|
|
constants. The fix is not critical because the values matched. Fixed bug
|
|
in discrete input registers implementation where the frame was not parsed
|
|
correctly. Added new support for a CodeWarrior Coldfire port.
|
|
|
|
Detailed notes:
|
|
- BUG (ALL): Modbus functions are compiled into the stack conditionally
|
|
by changing the MB_FUNC_XXX defines to either true(1) or false(0).
|
|
The defines for MB_FUNC_READ_HOLDING and MB_FUNC_WRITE_HOLDING
|
|
were wrong.
|
|
- BUG (ALL): eMBInit did not correctly check for addresses. Therefore
|
|
is was possible to start the Modbus stack with an address of 0
|
|
or one > 247.
|
|
- BUG (ALL): eMBFuncWriteHoldingRegister should use
|
|
MB_PDU_FUNC_WRITE_MUL_ADDR_OFF and not MB_PDU_FUNC_READ_ADDR_OFF.
|
|
- BUG (ALL): eMBFuncReadDiscreteInputs calculated the number of discrete
|
|
registers to read wrong.
|
|
- FEATURE (ALL): Fixed some warnings in the code.
|
|
|
|
2006-11-19 (REL_1_1_1) Christian Walter <wolti@sil.at>:
|
|
Notes: Fixed bug in Read/Write Multiple Registers function where
|
|
the registers addresses where calculated wrong.
|
|
Fixed bug in RTU and ASCII with the resource allocation in case of
|
|
an error.
|
|
Changed license to BSD style licsense.
|
|
|
|
Detailed notes:
|
|
- OTHER (ALL): License is now BSD for protocol stack.
|
|
- BUG (ALL): The registers address received in a Modbus frame
|
|
must be converted to application addresses. The code for this
|
|
conversion was missing and therefore has lead to error when
|
|
this function was used (Registers of by one, Start at > 1).
|
|
- BUG (ALL): If the serial initialization within the porting fails
|
|
a timer is still allocated in eMBRTUInit and eMBASCIIInit. This
|
|
can lead to a memory leak depending upon the implementation of the
|
|
porting layer.
|
|
- FEATURE (MCF5235): Added sample shell scripts for testing.
|
|
- FEATURE (MSP430): Added sample shell script for testing and
|
|
changed default values to match the other ports.
|
|
|
|
2006-10-30 (REL_1_1_0) Christian Walter <wolti@sil.at>:
|
|
Notes: Added support for Read/Write Multiple Registers function
|
|
(0x17). Added some tips to reduce memory requirements.
|
|
Added MSP430 Port for GCC and Rowley Crossworks.
|
|
|
|
Detailed notes:
|
|
- FEATURE (MSP430): Added new MSP430 port.
|
|
- FEATURE (ALL): Added support for Read/Write Multiple Registers
|
|
function (0x17). The implementation simply makes two callbacks
|
|
to the eMBRegHoldingCB function where first the values are
|
|
written and then the other register values are read.
|
|
- FEATURE (ALL): Added some tips on reducing memory requirements
|
|
with the protocol stack.
|
|
|
|
2006-10-30 (REL_1_0_5) Christian Walter <wolti@sil.at>:
|
|
Notes: eMBDisable and eMBClose can now be called multiple times
|
|
which makes shutdown of the protocol stack easier.
|
|
Fixed bug in RTU state machine where we switched from the
|
|
error state immediately to the idle state. Correct behaviour
|
|
would be to wait till the end of frame.
|
|
Added new STR71X GCC port which uses only freely available tools
|
|
like GNU ARM, OpenOCD (Wiggler) and GDB.
|
|
|
|
Detailed notes:
|
|
- FEATURE (STR71X): Added GCC standalone port which does not
|
|
depend on the Rowley Crosswork tools.
|
|
- FEATURE (ALL): eMBDisable can now be called multiple times
|
|
and returns MB_ENOERR in case is was already disabled.
|
|
eMBClose also supports beeing called multiple times in
|
|
which pvMBFrameCloseCur( ) is called when the protocol stack
|
|
is in state STATE_DISABLED.
|
|
- BUG (RTU): Fixed bug in xMBRTUReceiveFSM where the error
|
|
state is immediately left because of a missing break. Instead
|
|
we should wait till the damaged frame is finished.
|
|
|
|
2006-10-11 (REL_1_0_4) Christian Walter <wolti@sil.at>:
|
|
Notes: Fixed bug when more than 255 coils are requested. Fixed bug in
|
|
Linux/Cygwin port when not all bytes could be written by the first
|
|
call to write. Added support for removing previously registered
|
|
function handlers.
|
|
|
|
Detailed notes:
|
|
- BUG (ALL): mbfunccoils contained a bug which limited the amount
|
|
of coils to read to 255.
|
|
- BUG (LINUX): prvbMBPortSerialWrite contained a bug in the loop
|
|
which writes the RTU/ASCII frame to the serial file descriptor.
|
|
If not all bytes where written in the first call or write was
|
|
interrupted the sent frame is corrupted.
|
|
- FEATURE (ALL): eMBRegisterCB now supports NULL as handler
|
|
argument in which case a previously registered function
|
|
handler is deregistered from the protocol stack.
|
|
|
|
2006-09-27 (REL_1_0_3) Christian Walter <wolti@sil.at>:
|
|
Notes: Added new functions to support registering of custom callback
|
|
handlers. This makes it possible to implement new Modbus function
|
|
codes without touching the protocol stack.
|
|
New port for ATMega128 added. Thanks to Richard C Sandoz Jr. for
|
|
the patches.
|
|
|
|
Detailed notes:
|
|
- FEATURE (ALL): Added support for registering new functions handlers
|
|
with eMBRegisterCB.
|
|
- FEATURE (AVR): Added patches from Richard C Sandoz Jr. for ATMega128
|
|
|
|
2006-09-06 (REL_1_0_2) Christian Walter <wolti@sil.at>:
|
|
Notes: Fixed bug in FreeRTOS porting layer for STR71X/lwIP target where
|
|
memory is not freed in the sys_arch_thread_remove function.
|
|
Synched MCF5235TCP port with the FreeRTOS/lwIP port for the STR71X.
|
|
|
|
Detailed notes:
|
|
- BUG (STR71XTCP): Sys_arch_thread_remove did not free the memory from
|
|
the TCB.
|
|
- BUG (STR71XTCP): Unnecessary call to vTaskSuspendAll removed.
|
|
- BUG (STR71XTCP): Bug with counting variable. The first to lwIP tasks
|
|
got the same name (lwIP0).
|
|
- FEATURE (MCF5235TCP): Enhanced functions from the STR71X/lwIP port
|
|
merged into the Coldfire port.
|
|
|
|
2006-09-04 (REL_1_0_1) Christian Walter <wolti@sil.at>:
|
|
Notes: Fixed bug in serial driver for STR71x target when the ring buffer
|
|
overflows.
|
|
|
|
Detailed notes:
|
|
- BUG (STR71XTCP): Under high load the ring buffer in the serial driver
|
|
functions might overflow. There was an error with counting the number
|
|
of received characters which corrupted received frames.
|
|
Now receiver correctly recovers in case of dropped bytes.
|
|
|
|
2006-09-04 (REL_1_0) Christian Walter <wolti@sil.at>:
|
|
Notes: Added support for ATmega8, ATmega16, ATmega32, ATmega169 and
|
|
RS485 drivers in the AVR support. Special thanks to Tran Minh Hoang
|
|
for his contribution.
|
|
Added a new lwIP port for the STR71X target which uses one serial
|
|
interface for a PPP connection. This can be used for remote Modbus/TCP
|
|
devices in combination with a Modem (E.g. GPRS or Analog).
|
|
|
|
Detailed notes:
|
|
- FEATURES (AVR): Integrated patches from Tran Minh Hoang to support the
|
|
ATmega8, ATmega16, ATmega32, ATmega169 controllers.
|
|
- FEATURES (AVR): Added support for RS485 drivers in the AVR code. The
|
|
example supports the DS76176.
|
|
- FEATURES (STR71XTCP): implemented function in STR71X/lwIP porting layer
|
|
to remove running tasks.
|
|
- FEATURES (STR71XTCP): added new thread creation function in STR71X/lwIP
|
|
porting layer which allows specifing the stack size.
|
|
- BUGS (STR71XTCP): pppOpen defined in ppp.c does not check the return
|
|
value of sys_thread_new. If task creation fails the system crashes.
|
|
- BUGS (STR71XTCP): pppMain must not return - Instead it should remove
|
|
its task from the scheduler.
|
|
|
|
2006-08-30 (REL_9) Christian Walter <wolti@sil.at>:
|
|
Notes: Added lwIP port for the MCF5235 target. The lwIP part is
|
|
generic and therefore FreeModbus now works on any target with
|
|
lwIP support.
|
|
|
|
Detailed notes:
|
|
- FEATURES: Incoperated MCF5235 FreeRTOS/lwIP port done by the
|
|
author in this project.
|
|
- FEATURES: Added lwIP port for FreeModbus
|
|
- FEATURES: Added demo application for FreeModbus and lwIP.
|
|
|
|
2006-08-22 (REL_0_82) Christian Walter <wolti@sil.at>
|
|
Notes: Fixed bug with Modbus ASCII support
|
|
|
|
Detailed notes:
|
|
- BUG: During the last upgrade an error was introduced in the
|
|
initialization code of Modbus ASCII and therefore ASCII
|
|
support was broken. The bug is fixed now and was tested with
|
|
the Win32 port.
|
|
|
|
2006-08-22 (REL_0_81) Christian Walter <wolti@sil.at>
|
|
Notes: Added porting guide
|
|
|
|
Detailed notes:
|
|
- OTHER: Added a new porting guide to the documentation.
|
|
- OTHER: Added a empty example for new ports to the project as a
|
|
starting point.
|
|
|
|
2006-08-01 (REL_0_8) Christian Walter <wolti@sil.at>
|
|
Notes: Added Linux RTU/ASCII port.
|
|
|
|
Detailed notes:
|
|
- FEATURES: Added a new Linux RTU/ASCII port. The port should work
|
|
on any Linux distribution and it should be possible to run it
|
|
on uCLinux.
|
|
|
|
2006-06-26 (REL_0_7) Christian Walter <wolti@sil.at>
|
|
Notes: Changed the WIN32 serial port to better fit into the design.
|
|
|
|
Detailed notes:
|
|
- OTHER: Design of the WIN32 serial port changed. The polling function
|
|
for the serial device are now called from the event loop.
|
|
- OTHER: Debugging uses the same interface as the WIN32/TCP port.
|
|
|
|
2006-06-25 Christian Walter <wolti@sil.at>
|
|
|
|
Notes: Initial work on a Modbus/TCP port is available. The port includes
|
|
an example for a Win32 port which uses the Winsock API.
|
|
|
|
Detailed notes:
|
|
- FEATURES: added required functions to core protocol stack to support
|
|
a Modbus/TCP implementation.
|
|
- FEATURES: added a Win32 port for the Modbus/TCP core. The port is
|
|
currently limited to one concurrent client.
|
|
- OTHER: The implementation of eMBClose to shutdown the protocol stack
|
|
was changed to unify it with the new Modbus/TCP code.
|
|
-
|
|
|
|
2006-06-18 Christian Walter <wolti@sil.at>
|
|
|
|
Detailed notes:
|
|
- OTHER: while working on the Win32 port some line feeds got
|
|
wrong. Also some source files used tabs instead of spaces.
|
|
- OTHER: prototypes for xMBUtilSetBits and xMBUtilGetBits fixed.
|
|
usNBits should be ucNBits by convention.
|
|
|
|
2006-06-17 Christian Walter <wolti@sil.at>
|
|
|
|
Notes: Fixed various bugs with the Win32 port
|
|
|
|
Detailed notes:
|
|
- FEATURES: implement shutdown functionality for protocol stack.
|
|
- FEATURES: protocol stack can be enabled and disabled during runtime.
|
|
- FEATURES: interface functions now do more error checking. For
|
|
example if eMBPool is called in an uninitialized state.
|
|
- FEATURES: extended Win32 demo application to use the new features.
|
|
- BUG: fixed bug in Win32 demo for ASCII mode.
|
|
|
|
2006-06-16 Christian Walter <wolti@sil.at>
|
|
Notes: The new version includes a new port for the
|
|
Win32 platform
|
|
|
|
Detailed notes:
|
|
- FEATURES: added Win32 platform
|
|
|
|
2006-05-14 Christian Walter <wolti@sil.at>
|
|
Notes: The new version includes a new port for the
|
|
Freescale MCF5235 processor.
|
|
|
|
Detailed notes:
|
|
- FEATURES: added new MCF5235 port.
|
|
- OTHER: fixed some missing code headers.
|
|
|
|
2006-05-01 Christian Walter <wolti@sil.at>
|
|
Notes: This version removes the t1.5 timers from the Modbus RTU
|
|
implementation because no one actually uses it and the CPU
|
|
load is very high. T
|
|
In addition some documentation cleanups has been done and the
|
|
ARM demo has been updated.
|
|
|
|
Detailed notes:
|
|
|
|
- FEATURES: the t1.5 timeout has been removed. Therefore only
|
|
one timer is required.
|
|
- BUG: the ARM demo project missed some files in the project
|
|
workspace and did not compile cleanly
|
|
|
|
2006-02-28 Christian Walter <wolti@sil.at>
|
|
Notes: This version includes support for two new command
|
|
(write multiple coils, read discrete input)
|
|
|
|
Detailed notes:
|
|
- BUG: some function used the wrong data types
|
|
- FEATURES: added support for write multiple coils function.
|
|
- FEATURES: added support for read discrete input.
|
|
- OTHER: some code cleanups with lint tool.
|
|
|
|
2006-02-28 Christian Walter <wolti@sil.at>
|
|
|
|
Notes: The new version 0.31 adds support for reading and writing the
|
|
coil registers and add some bug fixes.
|
|
|
|
Detailed notes:
|
|
- BUG: fixed bug with to small modbus requests being ignored.
|
|
- FEATURES: added support for write single coil function.
|
|
- FEATURES: added support for working with byte packed bit fields
|
|
to support coils and discrete inputs better.
|
|
- API: API for set slave id functions changed.
|
|
|
|
2006-02-26 Christian Walter <wolti@sil.at>
|
|
|
|
Notes: First public release which includes an ARM and AVR port.
|