libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/apollo2/libraries/drivers/hal/am_hal_pwrctrl.h

352 lines
17 KiB
C
Raw Blame History

//*****************************************************************************
//
// am_hal_pwrctrl.h
//! @file
//!
//! @brief Functions for enabling and disabling power domains.
//!
//! @addtogroup pwrctrl2 Power Control
//! @ingroup apollo2hal
//! @{
//*****************************************************************************
//*****************************************************************************
//
// Copyright (c) 2017, Ambiq Micro
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
// contributors may be used to endorse or promote products derived from this
// software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
// POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 1.2.11 of the AmbiqSuite Development Package.
//
//*****************************************************************************
#ifndef AM_HAL_PWRCTRL_H
#define AM_HAL_PWRCTRL_H
//*****************************************************************************
//
// Peripheral enable bits for am_hal_pwrctrl_periph_enable/disable()
//
//*****************************************************************************
#define AM_HAL_PWRCTRL_ADC AM_REG_PWRCTRL_DEVICEEN_ADC_EN
#define AM_HAL_PWRCTRL_IOM0 AM_REG_PWRCTRL_DEVICEEN_IO_MASTER0_EN
#define AM_HAL_PWRCTRL_IOM1 AM_REG_PWRCTRL_DEVICEEN_IO_MASTER1_EN
#define AM_HAL_PWRCTRL_IOM2 AM_REG_PWRCTRL_DEVICEEN_IO_MASTER2_EN
#define AM_HAL_PWRCTRL_IOM3 AM_REG_PWRCTRL_DEVICEEN_IO_MASTER3_EN
#define AM_HAL_PWRCTRL_IOM4 AM_REG_PWRCTRL_DEVICEEN_IO_MASTER4_EN
#define AM_HAL_PWRCTRL_IOM5 AM_REG_PWRCTRL_DEVICEEN_IO_MASTER5_EN
#define AM_HAL_PWRCTRL_IOS AM_REG_PWRCTRL_DEVICEEN_IO_SLAVE_EN
#define AM_HAL_PWRCTRL_PDM AM_REG_PWRCTRL_DEVICEEN_PDM_EN
#define AM_HAL_PWRCTRL_UART0 AM_REG_PWRCTRL_DEVICEEN_UART0_EN
#define AM_HAL_PWRCTRL_UART1 AM_REG_PWRCTRL_DEVICEEN_UART1_EN
//*****************************************************************************
//
// Macro to set the appropriate IOM peripheral when using
// am_hal_pwrctrl_periph_enable()/disable().
// For Apollo2, the module argument must resolve to be a value from 0-5.
//
//*****************************************************************************
#define AM_HAL_PWRCTRL_IOM(module) \
(AM_REG_PWRCTRL_DEVICEEN_IO_MASTER0_EN << module)
//*****************************************************************************
//
// Macro to set the appropriate UART peripheral when using
// am_hal_pwrctrl_periph_enable()/disable().
// For Apollo2, the module argument must resolve to be a value from 0-1.
//
//*****************************************************************************
#define AM_HAL_PWRCTRL_UART(module) \
(AM_REG_PWRCTRL_DEVICEEN_UART0_EN << module)
//*****************************************************************************
//
// Memory enable values for am_hal_pwrctrl_memory_enable()
//
//*****************************************************************************
#define AM_HAL_PWRCTRL_MEMEN_SRAM8K AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM8K
#define AM_HAL_PWRCTRL_MEMEN_SRAM16K AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM16K
#define AM_HAL_PWRCTRL_MEMEN_SRAM24K (AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM16K | \
AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP0_SRAM2)
#define AM_HAL_PWRCTRL_MEMEN_SRAM32K AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM32K
#define AM_HAL_PWRCTRL_MEMEN_SRAM64K AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM64K
#define AM_HAL_PWRCTRL_MEMEN_SRAM96K \
(AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM64K | \
AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP2)
#define AM_HAL_PWRCTRL_MEMEN_SRAM128K AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM128K
#define AM_HAL_PWRCTRL_MEMEN_SRAM160K \
(AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM128K | \
AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP4)
#define AM_HAL_PWRCTRL_MEMEN_SRAM192K \
(AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM128K | \
AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP4 | \
AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP5)
#define AM_HAL_PWRCTRL_MEMEN_SRAM224K \
(AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM128K | \
AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP4 | \
AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP5 | \
AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP6)
#define AM_HAL_PWRCTRL_MEMEN_SRAM256K AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM256K
#define AM_HAL_PWRCTRL_MEMEN_FLASH512K AM_REG_PWRCTRL_MEMEN_FLASH0_EN
#define AM_HAL_PWRCTRL_MEMEN_FLASH1M \
(AM_REG_PWRCTRL_MEMEN_FLASH0_EN | \
AM_REG_PWRCTRL_MEMEN_FLASH1_EN)
#define AM_HAL_PWRCTRL_MEMEN_CACHE \
(AM_REG_PWRCTRL_MEMEN_CACHEB0_EN | \
AM_REG_PWRCTRL_MEMEN_CACHEB2_EN)
#define AM_HAL_PWRCTRL_MEMEN_CACHE_DIS \
~(AM_REG_PWRCTRL_MEMEN_CACHEB0_EN | \
AM_REG_PWRCTRL_MEMEN_CACHEB2_EN)
//
// Power up all available memory devices (this is the default power up state)
//
#define AM_HAL_PWRCTRL_MEMEN_ALL \
(AM_REG_PWRCTRL_MEMEN_SRAMEN_ALL | \
AM_REG_PWRCTRL_MEMEN_FLASH0_EN | \
AM_REG_PWRCTRL_MEMEN_FLASH1_EN | \
AM_REG_PWRCTRL_MEMEN_CACHEB0_EN | \
AM_REG_PWRCTRL_MEMEN_CACHEB2_EN)
//*****************************************************************************
//
// Peripheral power enable and disable delays
// The delay counts are based on an internal clock that runs at half of
// HFRC. Therefore, we need to double the delay cycles.
//
//*****************************************************************************
#define AM_HAL_PWRCTRL_DEVICEEN_DELAYCYCLES (22 * 2)
#define AM_HAL_PWRCTRL_DEVICEDIS_DELAYCYCLES (22 * 2)
//
// Use the following only when enabling after sleep (not during initialization).
//
#define AM_HAL_PWRCTRL_BUCKEN_DELAYCYCLES (0 * 2)
#define AM_HAL_PWRCTRL_BUCKDIS_DELAYCYCLES (15 * 2)
//*****************************************************************************
//
// Peripheral PWRONSTATUS groupings.
//
//*****************************************************************************
//
// Group DEVICEEN bits (per PWRONSTATUS groupings).
//
#define AM_HAL_PWRCTRL_DEVICEEN_IOM_0_2 \
(AM_REG_PWRCTRL_DEVICEEN_IO_MASTER0_EN | \
AM_REG_PWRCTRL_DEVICEEN_IO_MASTER1_EN | \
AM_REG_PWRCTRL_DEVICEEN_IO_MASTER2_EN )
#define AM_HAL_PWRCTRL_DEVICEEN_IOM_3_5 \
(AM_REG_PWRCTRL_DEVICEEN_IO_MASTER3_EN | \
AM_REG_PWRCTRL_DEVICEEN_IO_MASTER4_EN | \
AM_REG_PWRCTRL_DEVICEEN_IO_MASTER5_EN )
#define AM_HAL_PWRCTRL_DEVICEEN_IOS_UARTS \
(AM_REG_PWRCTRL_DEVICEEN_UART0_EN | \
AM_REG_PWRCTRL_DEVICEEN_UART1_EN | \
AM_REG_PWRCTRL_DEVICEEN_IO_SLAVE_EN )
#define AM_HAL_PWRCTRL_DEVICEEN_ADC AM_REG_PWRCTRL_DEVICEEN_ADC_EN
#define AM_HAL_PWRCTRL_DEVICEEN_PDM AM_REG_PWRCTRL_DEVICEEN_PDM_EN
//
// Map PWRONSTATUS bits to peripheral groupings.
//
#define AM_HAL_PWRCTRL_PWRONSTATUS_IOS_UARTS AM_REG_PWRCTRL_PWRONSTATUS_PDA_M
#define AM_HAL_PWRCTRL_PWRONSTATUS_IOM_3_5 AM_REG_PWRCTRL_PWRONSTATUS_PDC_M
#define AM_HAL_PWRCTRL_PWRONSTATUS_IOM_0_2 AM_REG_PWRCTRL_PWRONSTATUS_PDB_M
#define AM_HAL_PWRCTRL_PWRONSTATUS_ADC AM_REG_PWRCTRL_PWRONSTATUS_PDADC_M
#define AM_HAL_PWRCTRL_PWRONSTATUS_PDM AM_REG_PWRCTRL_PWRONSTATUS_PD_PDM_M
#define POLL_PWRSTATUS(ui32Peripheral) \
if ( 1 ) \
{ \
uint32_t ui32PwrOnStat; \
if ( ui32Peripheral & AM_HAL_PWRCTRL_DEVICEEN_IOM_0_2 ) \
{ \
ui32PwrOnStat = AM_HAL_PWRCTRL_PWRONSTATUS_IOM_0_2; \
} \
else if ( ui32Peripheral & AM_HAL_PWRCTRL_DEVICEEN_IOM_3_5 ) \
{ \
ui32PwrOnStat = AM_HAL_PWRCTRL_PWRONSTATUS_IOM_3_5; \
} \
else if ( ui32Peripheral & AM_HAL_PWRCTRL_DEVICEEN_IOS_UARTS ) \
{ \
ui32PwrOnStat = AM_HAL_PWRCTRL_PWRONSTATUS_IOS_UARTS; \
} \
else if ( ui32Peripheral & AM_HAL_PWRCTRL_DEVICEEN_ADC ) \
{ \
ui32PwrOnStat = AM_HAL_PWRCTRL_PWRONSTATUS_ADC; \
} \
else if ( ui32Peripheral & AM_HAL_PWRCTRL_DEVICEEN_PDM ) \
{ \
ui32PwrOnStat = AM_HAL_PWRCTRL_PWRONSTATUS_PDM; \
} \
else \
{ \
ui32PwrOnStat = 0xFFFFFFFF; \
} \
\
/* */ \
/* Wait for the power control setting to take effect. */ \
/* */ \
while ( !(AM_REG(PWRCTRL, PWRONSTATUS) & ui32PwrOnStat) ); \
}
//*****************************************************************************
//
// Memory PWRONSTATUS enable values for am_hal_pwrctrl_memory_enable()
//
//*****************************************************************************
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_8K \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_16K \
(AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M)
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_24K \
(AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M)
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_32K \
(AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM3_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M)
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_64K \
(AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP1_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM3_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M)
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_96K \
(AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP2_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP1_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM3_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M)
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_128K \
(AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP3_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP2_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP1_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM3_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M)
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_160K \
(AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP4_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP3_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP2_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP1_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM3_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M)
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_192K \
(AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP5_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP4_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP3_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP2_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP1_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM3_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M)
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_224K \
(AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP6_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP5_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP4_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP3_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP2_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP1_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM3_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M)
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_256K \
(AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP7_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP6_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP5_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP4_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP3_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP2_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP1_SRAM_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM3_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_M | \
AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M)
#define AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_ALL \
AM_HAL_PWRCTRL_PWRONSTATUS_SRAM_256K
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// Function prototypes
//
//*****************************************************************************
extern void am_hal_pwrctrl_periph_enable(uint32_t ui32Peripheral);
extern void am_hal_pwrctrl_periph_disable(uint32_t ui32Peripheral);
extern bool am_hal_pwrctrl_memory_enable(uint32_t ui32MemEn);
extern void am_hal_pwrctrl_bucks_init(void);
extern void am_hal_pwrctrl_bucks_enable(void);
extern void am_hal_pwrctrl_bucks_disable(void);
extern void am_hal_pwrctrl_low_power_init(void);
#ifdef __cplusplus
}
#endif
#endif // AM_HAL_PWRCTRL_H
//*****************************************************************************
//
// End Doxygen group.
//! @}
//
//*****************************************************************************
View Git Blame Copy Permalink