libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/nuvoton/libraries/n9h30/Driver/Include/N9H30.h

2098 lines
150 KiB
C
Raw Blame History

/**************************************************************************//**
* @file N9H30.h
* @version V1.00
* @brief N9H30 peripheral access layer header file.
* This file contains all the peripheral register's definitions
* and memory mapping for NuMicro N9H30 MCU.
*
* SPDX-License-Identifier: Apache-2.0
* @copyright (C) 2018 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
/**
\mainpage NuMicro N9H30 Family Driver Reference Guide
*
* <b>Introduction</b>
*
* This user manual describes the usage of N9H30 family device driver
*
* <b>Disclaimer</b>
*
* The Software is furnished "AS IS", without warranty as to performance or results, and
* the entire risk as to performance or results is assumed by YOU. Nuvoton disclaims all
* warranties, express, implied or otherwise, with regard to the Software, its use, or
* operation, including without limitation any and all warranties of merchantability, fitness
* for a particular purpose, and non-infringement of intellectual property rights.
*
* <b>Important Notice</b>
*
* Nuvoton Products are neither intended nor warranted for usage in systems or equipment,
* any malfunction or failure of which may cause loss of human life, bodily injury or severe
* property damage. Such applications are deemed, "Insecure Usage".
*
* Insecure usage includes, but is not limited to: equipment for surgical implementation,
* atomic energy control instruments, airplane or spaceship instruments, the control or
* operation of dynamic, brake or safety systems designed for vehicular use, traffic signal
* instruments, all types of safety devices, and other applications intended to support or
* sustain life.
*
* All Insecure Usage shall be made at customer's risk, and in the event that third parties
* lay claims to Nuvoton as a result of customer's Insecure Usage, customer shall indemnify
* the damages and liabilities thus incurred by Nuvoton.
*
* Please note that all data and specifications are subject to change without notice. All the
* trademarks of products and companies mentioned in this document belong to their respective
* owners.
*
* <b>Copyright Notice</b>
*
* Copyright (C) 2020 Nuvoton Technology Corp. All rights reserved.
*/
#ifndef __N9H30_H__
#define __N9H30_H__
#include <stdint.h>
/** @addtogroup N9H30_PERIPHERAL_MEM_MAP N9H30 Peripheral Memory Base
Memory Mapped Structure for N9H30 Peripheral
@{
*/
/*!< AHB peripherals */
#define SYS_BA 0xB0000000 /*!< System Global Control */
#define CLK_BA 0xB0000200 /*!< Clock Control */
#define EBI_BA 0xB0001000 /*!< EBI Control */
#define SDIC_BA 0xB0001800 /*!< SDRAM (SDR/DDR/DDR2) Control */
#define EMC0_BA 0xB0002000 /*!< Ethernet MAC 0 Control */
#define EMC1_BA 0xB0003000 /*!< Ethernet MAC 1 Control */
#define GDMA_BA 0xB0004000 /*!< GDMA control */
#define USBH_BA 0xB0005000 /*!< USB Host EHCI Control */
#define USBD_BA 0xB0006000 /*!< USB Device Control */
#define USBO_BA 0xB0007000 /*!< OHCI USB Host Control */
#define LCM_BA 0xB0008000 /*!< Display, LCM Interface */
#define ACTL_BA 0xB0009000 /*!< Audio Control */
#define JPEG_BA 0xB000A000 /*!< JPEG Engine Control */
#define GE_BA 0xB000B000 /*!< 2-D Graphic Engine */
#define SDH_BA 0xB000C000 /*!< SD/SDIO Host Controller */
#define FMI_BA 0xB000D000 /*!< Flash Memory Card Interface */
#define CAP_BA 0xB000E000 /*!< Sensor (Capture) Interface Control */
#define CRPT_BA 0xB000F000 /*!< Crypto Engine Control */
/*!< APB peripherals */
#define UART0_BA 0xB8000000 /*!< UART0 Control */
#define UART1_BA 0xB8000100 /*!< UART1 Control (High-Speed UART) */
#define UART2_BA 0xB8000200 /*!< UART2 Control (High-Speed UART) */
#define UART3_BA 0xB8000300 /*!< UART3 Control */
#define UART4_BA 0xB8000400 /*!< UART4 Control (High-Speed UART) */
#define UART5_BA 0xB8000500 /*!< UART5 Control */
#define UART6_BA 0xB8000600 /*!< UART6 Control (High-Speed UART) */
#define UART7_BA 0xB8000700 /*!< UART7 Control */
#define UART8_BA 0xB8000800 /*!< UART8 Control (High-Speed UART) */
#define UART9_BA 0xB8000900 /*!< UART9 Control */
#define UARTA_BA 0xB8000A00 /*!< UARTA Control (High-Speed UART) */
#define TMR0_BA 0xB8001000 /*!< Timer 0 */
#define TMR1_BA 0xB8001010 /*!< Timer 1 */
#define TMR2_BA 0xB8001020 /*!< Timer 2 */
#define TMR3_BA 0xB8001030 /*!< Timer 3 */
#define TMR4_BA 0xB8001040 /*!< Timer 4 */
#define ETMR0_BA 0xB8001400 /*!< Enhanced Timer 0 */
#define ETMR1_BA 0xB8001500 /*!< Enhanced Timer 1 */
#define ETMR2_BA 0xB8001600 /*!< Enhanced Timer 2 */
#define ETMR3_BA 0xB8001700 /*!< Enhanced Timer 3 */
#define WDT_BA 0xB8001800 /*!< Watch Dog Timer */
#define WWDT_BA 0xB8001900 /*!< Window Watch Dog Timer */
#define AIC_BA 0xB8002000 /*!< Interrupt Controller */
#define GPIO_BA 0xB8003000 /*!< GPIO Control */
#define RTC_BA 0xB8004000 /*!< Real Time Clock Control */
#define SC0_BA 0xB8005000 /*!< Smart Card 0 Control */
#define SC1_BA 0xB8005400 /*!< Smart Card 1 Control */
#define I2C0_BA 0xB8006000 /*!< I2C 0 Control */
#define I2C1_BA 0xB8006100 /*!< I2C 1 Control */
#define SPI0_BA 0xB8006200 /*!< Serial Peripheral Interface 0 */
#define SPI1_BA 0xB8006300 /*!< Serial Peripheral Interface 1 */
#define PWM_BA 0xB8007000 /*!< Pulse Width Modulation (PWM) Control */
#define ADC_BA 0xB800A000 /*!< ADC Control */
#define CAN0_BA 0xB800B000 /*!< CAN 0 Control */
#define CAN1_BA 0xB800B400 /*!< CAN 1 Control */
#define MTP_BA 0xB800C000 /*!< MTP Control */
/*@}*/ /* end of group N9H30_PERIPHERAL_MEM_MAP */
/******************************************************************************/
/* Device Specific Peripheral registers structures */
/******************************************************************************/
/** @addtogroup N9H30_Peripherals N9H30 Control Register
N9H30 Device Specific Peripheral registers structures
@{
*/
/*---------------------- System Manger Controller -------------------------*/
/**
@addtogroup SYS System Manger Controller(SYS)
Memory Mapped Structure for SYS Controller
@{ */
#define REG_SYS_PDID (SYS_BA+0x000) /*!< Product Identifier Register */
#define REG_SYS_PWRON (SYS_BA+0x004) /*!< Power-On Setting Register */
#define REG_SYS_ARBCON (SYS_BA+0x008) /*!< Arbitration Control Register */
#define REG_SYS_LVRDCR (SYS_BA+0x020) /*!< Low Voltage Reset & Detect Control Register */
#define REG_SYS_MISCFCR (SYS_BA+0x030) /*!< Miscellaneous Function Control Register */
#define REG_SYS_MISCIER (SYS_BA+0x040) /*!< Miscellaneous Interrupt Enable Register */
#define REG_SYS_MISCISR (SYS_BA+0x044) /*!< Miscellaneous Interrupt Status Register */
#define REG_SYS_WKUPSER (SYS_BA+0x058) /*!< System Wakeup Source Enable Register */
#define REG_SYS_WKUPSSR (SYS_BA+0x05C) /*!< System Wakeup Source Status Register */
#define REG_SYS_AHBIPRST (SYS_BA+0x060) /*!< AHB IP Reset Control Register */
#define REG_SYS_APBIPRST0 (SYS_BA+0x064) /*!< APB IP Reset Control Register 0 */
#define REG_SYS_APBIPRST1 (SYS_BA+0x068) /*!< APB IP Reset Control Register 1 */
#define REG_SYS_RSTSTS (SYS_BA+0x06C) /*!< Reset Source Active Status Register */
#define REG_SYS_GPA_MFPL (SYS_BA+0x070) /*!< GPIOA Low Byte Multiple Function Control Register */
#define REG_SYS_GPA_MFPH (SYS_BA+0x074) /*!< GPIOA High Byte Multiple Function Control Register */
#define REG_SYS_GPB_MFPL (SYS_BA+0x078) /*!< GPIOB Low Byte Multiple Function Control Register */
#define REG_SYS_GPB_MFPH (SYS_BA+0x07C) /*!< GPIOB High Byte Multiple Function Control Register */
#define REG_SYS_GPC_MFPL (SYS_BA+0x080) /*!< GPIOC Low Byte Multiple Function Control Register */
#define REG_SYS_GPC_MFPH (SYS_BA+0x084) /*!< GPIOC High Byte Multiple Function Control Register */
#define REG_SYS_GPD_MFPL (SYS_BA+0x088) /*!< GPIOD Low Byte Multiple Function Control Register */
#define REG_SYS_GPD_MFPH (SYS_BA+0x08C) /*!< GPIOD High Byte Multiple Function Control Register */
#define REG_SYS_GPE_MFPL (SYS_BA+0x090) /*!< GPIOE Low Byte Multiple Function Control Register */
#define REG_SYS_GPE_MFPH (SYS_BA+0x094) /*!< GPIOE High Byte Multiple Function Control Register */
#define REG_SYS_GPF_MFPL (SYS_BA+0x098) /*!< GPIOF Low Byte Multiple Function Control Register */
#define REG_SYS_GPF_MFPH (SYS_BA+0x09C) /*!< GPIOF High Byte Multiple Function Control Register */
#define REG_SYS_GPG_MFPL (SYS_BA+0x0A0) /*!< GPIOG Low Byte Multiple Function Control Register */
#define REG_SYS_GPG_MFPH (SYS_BA+0x0A4) /*!< GPIOG High Byte Multiple Function Control Register */
#define REG_SYS_GPH_MFPL (SYS_BA+0x0A8) /*!< GPIOH Low Byte Multiple Function Control Register */
#define REG_SYS_GPH_MFPH (SYS_BA+0x0AC) /*!< GPIOH High Byte Multiple Function Control Register */
#define REG_SYS_GPI_MFPL (SYS_BA+0x0B0) /*!< GPIOI Low Byte Multiple Function Control Register */
#define REG_SYS_GPI_MFPH (SYS_BA+0x0B4) /*!< GPIOI High Byte Multiple Function Control Register */
#define REG_SYS_GPJ_MFPL (SYS_BA+0x0B8) /*!< GPIOJ Low Byte Multiple Function Control Register */
#define REG_SYS_DDR_DSCTL (SYS_BA+0x0F0) /*!< DDR I/O Driving Strength Control Register */
#define REG_SYS_PORDISCR (SYS_BA+0x100) /*!< Power-On-Reset Disable Control Register */
#define REG_SYS_ICEDBGCR (SYS_BA+0x104) /*!< ICE Debug Interface Control Register */
#define REG_SYS_ERRADDCR (SYS_BA+0x108) /*!< Error Response Address Control Regsiter */
#define REG_SYS_REGWPCTL (SYS_BA+0x1FC) /*!< Register Write-Protection Control Register */
/**@}*/ /* end of SYS register group */
/*---------------------- System Clock Controller -------------------------*/
/**
@addtogroup CLK System Clock Controller(CLK)
Memory Mapped Structure for CLK Controller
@{ */
#define REG_CLK_PMCON (CLK_BA+0x00) /*!< Power Management Control Register */
#define REG_CLK_HCLKEN (CLK_BA+0x10) /*!< AHB IP Clock Enable Control Register */
#define REG_CLK_PCLKEN0 (CLK_BA+0x18) /*!< APB IP Clock Enable Control Register 0 */
#define REG_CLK_PCLKEN1 (CLK_BA+0x1C) /*!< APB IP Clock Enable Control Register 1 */
#define REG_CLK_DIVCTL0 (CLK_BA+0x20) /*!< Clock Divider Control Register 0 */
#define REG_CLK_DIVCTL1 (CLK_BA+0x24) /*!< Clock Divider Control Register 1 */
#define REG_CLK_DIVCTL2 (CLK_BA+0x28) /*!< Clock Divider Control Register 2 */
#define REG_CLK_DIVCTL3 (CLK_BA+0x2C) /*!< Clock Divider Control Register 3 */
#define REG_CLK_DIVCTL4 (CLK_BA+0x30) /*!< Clock Divider Control Register 4 */
#define REG_CLK_DIVCTL5 (CLK_BA+0x34) /*!< Clock Divider Control Register 5 */
#define REG_CLK_DIVCTL6 (CLK_BA+0x38) /*!< Clock Divider Control Register 6 */
#define REG_CLK_DIVCTL7 (CLK_BA+0x3C) /*!< Clock Divider Control Register 7 */
#define REG_CLK_DIVCTL8 (CLK_BA+0x40) /*!< Clock Divider Control Register 8 */
#define REG_CLK_DIVCTL9 (CLK_BA+0x44) /*!< Clock Divider Control Register 9 */
#define REG_CLK_APLLCON (CLK_BA+0x60) /*!< APLL Control Register */
#define REG_CLK_UPLLCON (CLK_BA+0x64) /*!< UPLL Control Register */
#define REG_CLK_PLLSTBCNTR (CLK_BA+0x80) /*!< PLL Stable Counter and Test Clock Control Register */
/**@}*/ /* end of CLK register group */
/*---------------------- External Bus Interface Controller -------------------------*/
/**
@addtogroup EBI External Bus Interface Controller(EBI)
Memory Mapped Structure for EBI Controller
@{ */
#define REG_EBI_CTL (EBI_BA+0x000) /*!< EBI control register */
#define REG_EBI_BNKCTL0 (EBI_BA+0x018) /*!< External I/O 0 control register */
#define REG_EBI_BNKCTL1 (EBI_BA+0x01C) /*!< External I/O 1 control register */
#define REG_EBI_BNKCTL2 (EBI_BA+0x020) /*!< External I/O 2 control register */
#define REG_EBI_BNKCTL3 (EBI_BA+0x024) /*!< External I/O 3 control register */
#define REG_EBI_BNKCTL4 (EBI_BA+0x028) /*!< External I/O 4 control register */
/**@}*/ /* end of EBI register group */
/*---------------------- Ethernet MAC Controller -------------------------*/
/**
@addtogroup EMAC Ethernet MAC Controller(EMAC)
Memory Mapped Structure for EMAC Controller
@{ */
#define REG_EMAC0_CAMCMR (EMC0_BA+0x000) /*!< CAM Command Register */
#define REG_EMAC0_CAMEN (EMC0_BA+0x004) /*!< CAM Enable Register */
#define REG_EMAC0_CAM0M (EMC0_BA+0x008) /*!< CAM0 Most Significant Word Register */
#define REG_EMAC0_CAM0L (EMC0_BA+0x00c) /*!< CAM0 Least Significant Word Register */
#define REG_EMAC0_CAMxM_Reg(x)(REG_EMAC0_CAM0M+(x)*0x8) /*!< CAMx Most Significant Word Register */
#define REG_EMAC0_CAMxL_Reg(x)(REG_EMAC0_CAM0L+(x)*0x8) /*!< CAMx Least Significant Word Register */
#define REG_EMAC0_TXDLSA (EMC0_BA+0x088) /*!< Transmit Descriptor Link List Start Address Register */
#define REG_EMAC0_RXDLSA (EMC0_BA+0x08C) /*!< Receive Descriptor Link List Start Address Register */
#define REG_EMAC0_MCMDR (EMC0_BA+0x090) /*!< MAC Command Register */
#define REG_EMAC0_MIID (EMC0_BA+0x094) /*!< MII Management Data Register */
#define REG_EMAC0_MIIDA (EMC0_BA+0x098) /*!< MII Management Control and Address Register */
#define REG_EMAC0_FFTCR (EMC0_BA+0x09C) /*!< FIFO Threshold Control Register */
#define REG_EMAC0_TSDR (EMC0_BA+0x0a0) /*!< Transmit Start Demand Register */
#define REG_EMAC0_RSDR (EMC0_BA+0x0a4) /*!< Receive Start Demand Register */
#define REG_EMAC0_DMARFC (EMC0_BA+0x0a8) /*!< Maximum Receive Frame Control Register */
#define REG_EMAC0_MIEN (EMC0_BA+0x0ac) /*!< MAC Interrupt Enable Register */
#define REG_EMAC0_MISTA (EMC0_BA+0x0b0) /*!< MAC Interrupt Status Register */
#define REG_EMAC0_MGSTA (EMC0_BA+0x0b4) /*!< MAC General Status Register */
#define REG_EMAC0_MPCNT (EMC0_BA+0x0b8) /*!< Missed Packet Count Register */
#define REG_EMAC0_MRPC (EMC0_BA+0x0bc) /*!< MAC Receive Pause Count Register */
#define REG_EMAC0_DMARFS (EMC0_BA+0x0c8) /*!< DMA Receive Frame Status Register */
#define REG_EMAC0_CTXDSA (EMC0_BA+0x0cc) /*!< Current Transmit Descriptor Start Address Register */
#define REG_EMAC0_CTXBSA (EMC0_BA+0x0d0) /*!< Current Transmit Buffer Start Address Register */
#define REG_EMAC0_CRXDSA (EMC0_BA+0x0d4) /*!< Current Receive Descriptor Start Address Register */
#define REG_EMAC0_CRXBSA (EMC0_BA+0x0d8) /*!< Current Receive Buffer Start Address Register */
#define REG_EMAC0_TSCTL (EMC0_BA+0x100) /*!< Time Stamp Control Register */
#define REG_EMAC0_TSSEC (EMC0_BA+0x110) /*!< Time Stamp Counter Second Register */
#define REG_EMAC0_TSSUBSEC (EMC0_BA+0x114) /*!< Time Stamp Counter Sub Second Register */
#define REG_EMAC0_TSINC (EMC0_BA+0x118) /*!< Time Stamp Increment Register */
#define REG_EMAC0_TSADDEN (EMC0_BA+0x11c) /*!< Time Stamp Addend Register */
#define REG_EMAC0_TSUPDSEC (EMC0_BA+0x120) /*!< Time Stamp Update Second Register */
#define REG_EMAC0_TSUPDSUBSEC (EMC0_BA+0x124) /*!< Time Stamp Update Sub Second Register */
#define REG_EMAC0_TSALMSEC (EMC0_BA+0x128) /*!< Time Stamp Alarm Second Register */
#define REG_EMAC0_TSALMSUBSEC (EMC0_BA+0x12c) /*!< Time Stamp Alarm Sub Second Register */
#define REG_EMAC1_CAMCMR (EMC1_BA+0x000) /*!< CAM Command Register */
#define REG_EMAC1_CAMEN (EMC1_BA+0x004) /*!< CAM Enable Register */
#define REG_EMAC1_CAM0M (EMC1_BA+0x008) /*!< CAM0 Most Significant Word Register */
#define REG_EMAC1_CAM0L (EMC1_BA+0x00c) /*!< CAM0 Least Significant Word Register */
#define REG_EMAC1_CAMxM_Reg(x)(REG_EMAC1_CAM0M+(x)*0x8) /*!< CAMx Most Significant Word Register */
#define REG_EMAC1_CAMxL_Reg(x)(REG_EMAC1_CAM0L+(x)*0x8) /*!< CAMx Least Significant Word Register */
#define REG_EMAC1_TXDLSA (EMC1_BA+0x088) /*!< Transmit Descriptor Link List Start Address Register */
#define REG_EMAC1_RXDLSA (EMC1_BA+0x08C) /*!< Receive Descriptor Link List Start Address Register */
#define REG_EMAC1_MCMDR (EMC1_BA+0x090) /*!< MAC Command Register */
#define REG_EMAC1_MIID (EMC1_BA+0x094) /*!< MII Management Data Register */
#define REG_EMAC1_MIIDA (EMC1_BA+0x098) /*!< MII Management Control and Address Register */
#define REG_EMAC1_FFTCR (EMC1_BA+0x09C) /*!< FIFO Threshold Control Register */
#define REG_EMAC1_TSDR (EMC1_BA+0x0a0) /*!< Transmit Start Demand Register */
#define REG_EMAC1_RSDR (EMC1_BA+0x0a4) /*!< Receive Start Demand Register */
#define REG_EMAC1_DMARFC (EMC1_BA+0x0a8) /*!< Maximum Receive Frame Control Register */
#define REG_EMAC1_MIEN (EMC1_BA+0x0ac) /*!< MAC Interrupt Enable Register */
#define REG_EMAC1_MISTA (EMC1_BA+0x0b0) /*!< MAC Interrupt Status Register */
#define REG_EMAC1_MGSTA (EMC1_BA+0x0b4) /*!< MAC General Status Register */
#define REG_EMAC1_MPCNT (EMC1_BA+0x0b8) /*!< Missed Packet Count Register */
#define REG_EMAC1_MRPC (EMC1_BA+0x0bc) /*!< MAC Receive Pause Count Register */
#define REG_EMAC1_DMARFS (EMC1_BA+0x0c8) /*!< DMA Receive Frame Status Register */
#define REG_EMAC1_CTXDSA (EMC1_BA+0x0cc) /*!< Current Transmit Descriptor Start Address Register */
#define REG_EMAC1_CTXBSA (EMC1_BA+0x0d0) /*!< Current Transmit Buffer Start Address Register */
#define REG_EMAC1_CRXDSA (EMC1_BA+0x0d4) /*!< Current Receive Descriptor Start Address Register */
#define REG_EMAC1_CRXBSA (EMC1_BA+0x0d8) /*!< Current Receive Buffer Start Address Register */
#define REG_EMAC1_TSCTL (EMC1_BA+0x100) /*!< Time Stamp Control Register */
#define REG_EMAC1_TSSEC (EMC1_BA+0x110) /*!< Time Stamp Counter Second Register */
#define REG_EMAC1_TSSUBSEC (EMC1_BA+0x114) /*!< Time Stamp Counter Sub Second Register */
#define REG_EMAC1_TSINC (EMC1_BA+0x118) /*!< Time Stamp Increment Register */
#define REG_EMAC1_TSADDEN (EMC1_BA+0x11c) /*!< Time Stamp Addend Register */
#define REG_EMAC1_TSUPDSEC (EMC1_BA+0x120) /*!< Time Stamp Update Second Register */
#define REG_EMAC1_TSUPDSUBSEC (EMC1_BA+0x124) /*!< Time Stamp Update Sub Second Register */
#define REG_EMAC1_TSALMSEC (EMC1_BA+0x128) /*!< Time Stamp Alarm Second Register */
#define REG_EMAC1_TSALMSUBSEC (EMC1_BA+0x12c) /*!< Time Stamp Alarm Sub Second Register */
/**@}*/ /* end of EMAC register group */
/*---------------------- General Direct Memory Access Controller -------------------------*/
/**
@addtogroup GDMA General Direct Memory Access Controller(GDMA)
Memory Mapped Structure for GDMA Controller
@{ */
#define REG_GDMA_CTL0 (GDMA_BA+0x000) /*!< Channel 0 Control Register */
#define REG_GDMA_SRCB0 (GDMA_BA+0x004) /*!< Channel 0 Source Base Address Register */
#define REG_GDMA_DSTB0 (GDMA_BA+0x008) /*!< Channel 0 Destination Base Address Register */
#define REG_GDMA_TCNT0 (GDMA_BA+0x00C) /*!< Channel 0 Transfer Count Register */
#define REG_GDMA_CSRC0 (GDMA_BA+0x010) /*!< Channel 0 Current Source Address Register */
#define REG_GDMA_CDST0 (GDMA_BA+0x014) /*!< Channel 0 Current Destination Address Register */
#define REG_GDMA_CTCNT0 (GDMA_BA+0x018) /*!< Channel 0 Current Transfer Count Register */
#define REG_GDMA_DADR0 (GDMA_BA+0x01C) /*!< Channel 0 Descriptor Address Register */
#define REG_GDMA_CTL1 (GDMA_BA+0x020) /*!< Channel 1 Control Register */
#define REG_GDMA_SRCB1 (GDMA_BA+0x024) /*!< Channel 1 Source Base Address Register */
#define REG_GDMA_DSTB1 (GDMA_BA+0x028) /*!< Channel 1 Destination Base Address Register */
#define REG_GDMA_TCNT1 (GDMA_BA+0x02C) /*!< Channel 1 Transfer Count Register */
#define REG_GDMA_CSRC1 (GDMA_BA+0x030) /*!< Channel 1 Current Source Address Register */
#define REG_GDMA_CDST1 (GDMA_BA+0x034) /*!< Channel 1 Current Destination Address Register */
#define REG_GDMA_CTCNT1 (GDMA_BA+0x038) /*!< Channel 1 Current Transfer Count Register */
#define REG_GDMA_DADR1 (GDMA_BA+0x03C) /*!< Channel 1 Descriptor Address Register */
#define REG_GDMA_INTBUF0 (GDMA_BA+0x080) /*!< GDMA Internal Buffer Word 0 */
#define REG_GDMA_INTBUF1 (GDMA_BA+0x084) /*!< GDMA Internal Buffer Word 1 */
#define REG_GDMA_INTBUF2 (GDMA_BA+0x088) /*!< GDMA Internal Buffer Word 2 */
#define REG_GDMA_INTBUF3 (GDMA_BA+0x08C) /*!< GDMA Internal Buffer Word 3 */
#define REG_GDMA_INTBUF4 (GDMA_BA+0x090) /*!< GDMA Internal Buffer Word 4 */
#define REG_GDMA_INTBUF5 (GDMA_BA+0x094) /*!< GDMA Internal Buffer Word 5 */
#define REG_GDMA_INTBUF6 (GDMA_BA+0x098) /*!< GDMA Internal Buffer Word 6 */
#define REG_GDMA_INTBUF7 (GDMA_BA+0x09C) /*!< GDMA Internal Buffer Word 7 */
#define REG_GDMA_INTCS (GDMA_BA+0x0A0) /*!< Interrupt Control and Status Register */
/**@}*/ /* end of GDMA register group */
/*---------------------- USB Device Controller -------------------------*/
/**
@addtogroup USBD USB Device Controller(USBD)
Memory Mapped Structure for USBD Controller
@{ */
#define REG_USBD_GINTSTS (USBD_BA+0x00) /*!< Interrupt Status Low Register */
#define REG_USBD_GINTEN (USBD_BA+0x08) /*!< Interrupt Enable Low Register */
#define REG_USBD_BUSINTSTS (USBD_BA+0x10) /*!< USB Bus Interrupt Status Register */
#define REG_USBD_BUSINTEN (USBD_BA+0x14) /*!< USB Bus Interrupt Enable Register */
#define REG_USBD_OPER (USBD_BA+0x18) /*!< USB Operational Register */
#define REG_USBD_FRAMECNT (USBD_BA+0x1C) /*!< USB Frame Count Register */
#define REG_USBD_FADDR (USBD_BA+0x20) /*!< USB Function Address Register */
#define REG_USBD_TEST (USBD_BA+0x24) /*!< USB Test Mode Register */
#define REG_USBD_CEPDAT (USBD_BA+0x28) /*!< Control-ep data buffer register */
#define REG_USBD_CEPCTL (USBD_BA+0x2C) /*!< Control-ep control and status register */
#define REG_USBD_CEPINTEN (USBD_BA+0x30) /*!< Control-ep interrupt enable register */
#define REG_USBD_CEPINTSTS (USBD_BA+0x34) /*!< Control-ep interrupt status register */
#define REG_USBD_CEPTXCNT (USBD_BA+0x38) /*!< In-transfer data count register */
#define REG_USBD_CEPRXCNT (USBD_BA+0x3C) /*!< Out-transfer data count register */
#define REG_USBD_CEPDATCNT (USBD_BA+0x40) /*!< Control-ep data count register */
#define REG_USBD_SETUP1_0 (USBD_BA+0x44) /*!< Setup byte1 & byte0 register */
#define REG_USBD_SETUP3_2 (USBD_BA+0x48) /*!< Setup byte3 & byte2 register */
#define REG_USBD_SETUP5_4 (USBD_BA+0x4C) /*!< Setup byte5 & byte4 register */
#define REG_USBD_SETUP7_6 (USBD_BA+0x50) /*!< Setup byte7 & byte6 register */
#define REG_USBD_CEPBUFSTART (USBD_BA+0x54) /*!< Control-ep ram start address register */
#define REG_USBD_CEPBUFEND (USBD_BA+0x58) /*!< Control-ep ram end address register */
#define REG_USBD_DMACTL (USBD_BA+0x5C) /*!< Dma control and status register */
#define REG_USBD_DMACNT (USBD_BA+0x60) /*!< Dma count register */
#define REG_USBD_EPADAT (USBD_BA+0x64) /*!< Endpoint A data buffer register */
#define REG_USBD_EPAINTSTS (USBD_BA+0x68) /*!< Endpoint A interrupt status register */
#define REG_USBD_EPAINTEN (USBD_BA+0x6C) /*!< Endpoint A interrupt enable register */
#define REG_USBD_EPADATCNT (USBD_BA+0x70) /*!< Data count available in endpoint A buffer */
#define REG_USBD_EPARSPCTL (USBD_BA+0x74) /*!< Endpoint A response register set/clear */
#define REG_USBD_EPAMPS (USBD_BA+0x78) /*!< Endpoint A max packet size register */
#define REG_USBD_EPATXCNT (USBD_BA+0x7C) /*!< Endpoint A transfer count register */
#define REG_USBD_EPACFG (USBD_BA+0x80) /*!< Endpoint A configuration register */
#define REG_USBD_EPABUFSTART (USBD_BA+0x84) /*!< Endpoint A ram start address register */
#define REG_USBD_EPABUFEND (USBD_BA+0x88) /*!< Endpoint A ram end address register */
#define REG_USBD_EPBDAT (USBD_BA+0x8C) /*!< Endpoint B data buffer register */
#define REG_USBD_EPBINTSTS (USBD_BA+0x90) /*!< Endpoint B interrupt status register */
#define REG_USBD_EPBINTEN (USBD_BA+0x94) /*!< Endpoint B interrupt enable register */
#define REG_USBD_EPBDATCNT (USBD_BA+0x98) /*!< Data count available in endpoint B buffer */
#define REG_USBD_EPBRSPCTL (USBD_BA+0x9C) /*!< Endpoint B response register set/clear */
#define REG_USBD_EPBMPS (USBD_BA+0xA0) /*!< Endpoint B max packet size register */
#define REG_USBD_EPBTXCNT (USBD_BA+0xA4) /*!< Endpoint B transfer count register */
#define REG_USBD_EPBCFG (USBD_BA+0xA8) /*!< Endpoint B configuration register */
#define REG_USBD_EPBBUFSTART (USBD_BA+0xAC) /*!< Endpoint B ram start address register */
#define REG_USBD_EPBBUFEND (USBD_BA+0xB0) /*!< Endpoint B ram end address register */
#define REG_USBD_EPCDAT (USBD_BA+0xB4) /*!< Endpoint C data buffer register */
#define REG_USBD_EPCINTSTS (USBD_BA+0xB8) /*!< Endpoint C interrupt status register */
#define REG_USBD_EPCINTEN (USBD_BA+0xBC) /*!< Endpoint C interrupt enable register */
#define REG_USBD_EPCDATCNT (USBD_BA+0xC0) /*!< Data count available in endpoint C buffer */
#define REG_USBD_EPCRSPCTL (USBD_BA+0xC4) /*!< Endpoint C response register set/clear */
#define REG_USBD_EPCMPS (USBD_BA+0xC8) /*!< Endpoint C max packet size register */
#define REG_USBD_EPCTXCNT (USBD_BA+0xCC) /*!< Endpoint C transfer count register */
#define REG_USBD_EPCCFG (USBD_BA+0xD0) /*!< Endpoint C configuration register */
#define REG_USBD_EPCBUFSTART (USBD_BA+0xD4) /*!< Endpoint C ram start address register */
#define REG_USBD_EPCBUFEND (USBD_BA+0xD8) /*!< Endpoint C ram end address register */
#define REG_USBD_EPDDAT (USBD_BA+0xDC) /*!< Endpoint D data buffer register */
#define REG_USBD_EPDINTSTS (USBD_BA+0xE0) /*!< Endpoint D interrupt status register */
#define REG_USBD_EPDINTEN (USBD_BA+0xE4) /*!< Endpoint D interrupt enable register */
#define REG_USBD_EPDDATCNT (USBD_BA+0xE8) /*!< Data count available in endpoint D buffer */
#define REG_USBD_EPDRSPCTL (USBD_BA+0xEC) /*!< Endpoint D response register set/clear */
#define REG_USBD_EPDMPS (USBD_BA+0xF0) /*!< Endpoint D max packet size register */
#define REG_USBD_EPDTXCNT (USBD_BA+0xF4) /*!< Endpoint D transfer count register */
#define REG_USBD_EPDCFG (USBD_BA+0xF8) /*!< Endpoint D configuration register */
#define REG_USBD_EPDBUFSTART (USBD_BA+0xFC) /*!< Endpoint D ram start address register */
#define REG_USBD_EPDBUFEND (USBD_BA+0x100) /*!< Endpoint D ram end address register */
#define REG_USBD_EPEDAT (USBD_BA+0x104) /*!< Endpoint E data buffer register */
#define REG_USBD_EPEINTSTS (USBD_BA+0x108) /*!< Endpoint E interrupt status register */
#define REG_USBD_EPEINTEN (USBD_BA+0x10C) /*!< Endpoint E interrupt enable register */
#define REG_USBD_EPEDATCNT (USBD_BA+0x110) /*!< Data count available in endpoint E buffer */
#define REG_USBD_EPERSPCTL (USBD_BA+0x114) /*!< Endpoint E response register set/clear */
#define REG_USBD_EPEMPS (USBD_BA+0x118) /*!< Endpoint E max packet size register */
#define REG_USBD_EPETXCNT (USBD_BA+0x11C) /*!< Endpoint E transfer count register */
#define REG_USBD_EPECFG (USBD_BA+0x120) /*!< Endpoint E configuration register */
#define REG_USBD_EPEBUFSTART (USBD_BA+0x124) /*!< Endpoint E ram start address register */
#define REG_USBD_EPEBUFEND (USBD_BA+0x128) /*!< Endpoint E ram end address register */
#define REG_USBD_EPFDAT (USBD_BA+0x12C) /*!< Endpoint F data buffer register */
#define REG_USBD_EPFINTSTS (USBD_BA+0x130) /*!< Endpoint F interrupt status register */
#define REG_USBD_EPFINTEN (USBD_BA+0x134) /*!< Endpoint F interrupt enable register */
#define REG_USBD_EPFDATCNT (USBD_BA+0x138) /*!< Data count available in endpoint F buffer */
#define REG_USBD_EPFRSPCTL (USBD_BA+0x13C) /*!< Endpoint F response register set/clear */
#define REG_USBD_EPFMPS (USBD_BA+0x140) /*!< Endpoint F max packet size register */
#define REG_USBD_EPFTXCNT (USBD_BA+0x144) /*!< Endpoint F transfer count register */
#define REG_USBD_EPFCFG (USBD_BA+0x148) /*!< Endpoint F configuration register */
#define REG_USBD_EPFBUFSTART (USBD_BA+0x14C) /*!< Endpoint F ram start address register */
#define REG_USBD_EPFBUFEND (USBD_BA+0x150) /*!< Endpoint F ram end address register */
#define REG_USBD_EPGDAT (USBD_BA+0x154) /*!< Endpoint G data buffer register */
#define REG_USBD_EPGINTSTS (USBD_BA+0x158) /*!< Endpoint G interrupt status register */
#define REG_USBD_EPGINTEN (USBD_BA+0x15C) /*!< Endpoint G interrupt enable register */
#define REG_USBD_EPGDATCNT (USBD_BA+0x160) /*!< Data count available in endpoint G buffer */
#define REG_USBD_EPGRSPCTL (USBD_BA+0x164) /*!< Endpoint G response register set/clear */
#define REG_USBD_EPGMPS (USBD_BA+0x168) /*!< Endpoint G max packet size register */
#define REG_USBD_EPGTXCNT (USBD_BA+0x16C) /*!< Endpoint G transfer count register */
#define REG_USBD_EPGCFG (USBD_BA+0x170) /*!< Endpoint G configuration register */
#define REG_USBD_EPGBUFSTART (USBD_BA+0x174) /*!< Endpoint G ram start address register */
#define REG_USBD_EPGBUFEND (USBD_BA+0x178) /*!< Endpoint G ram end address register */
#define REG_USBD_EPHDAT (USBD_BA+0x17C) /*!< Endpoint H data buffer register */
#define REG_USBD_EPHINTSTS (USBD_BA+0x180) /*!< Endpoint H interrupt status register */
#define REG_USBD_EPHINTEN (USBD_BA+0x184) /*!< Endpoint H interrupt enable register */
#define REG_USBD_EPHDATCNT (USBD_BA+0x188) /*!< Data count available in endpoint H buffer */
#define REG_USBD_EPHRSPCTL (USBD_BA+0x18C) /*!< Endpoint H response register set/clear */
#define REG_USBD_EPHMPS (USBD_BA+0x190) /*!< Endpoint H max packet size register */
#define REG_USBD_EPHTXCNT (USBD_BA+0x194) /*!< Endpoint H transfer count register */
#define REG_USBD_EPHCFG (USBD_BA+0x198) /*!< Endpoint H configuration register */
#define REG_USBD_EPHBUFSTART (USBD_BA+0x19C) /*!< Endpoint H ram start address register */
#define REG_USBD_EPHBUFEND (USBD_BA+0x1A0) /*!< Endpoint H ram end address register */
#define REG_USBD_EPIDAT (USBD_BA+0x1A4) /*!< Endpoint I data buffer register */
#define REG_USBD_EPIINTSTS (USBD_BA+0x1A8) /*!< Endpoint I interrupt status register */
#define REG_USBD_EPIINTEN (USBD_BA+0x1AC) /*!< Endpoint I interrupt enable register */
#define REG_USBD_EPIDATCNT (USBD_BA+0x1B0) /*!< Data count available in endpoint I buffer */
#define REG_USBD_EPIRSPCTL (USBD_BA+0x1B4) /*!< Endpoint I response register set/clear */
#define REG_USBD_EPIMPS (USBD_BA+0x1B8) /*!< Endpoint I max packet size register */
#define REG_USBD_EPITXCNT (USBD_BA+0x1BC) /*!< Endpoint I transfer count register */
#define REG_USBD_EPICFG (USBD_BA+0x1C0) /*!< Endpoint I configuration register */
#define REG_USBD_EPIBUFSTART (USBD_BA+0x1C4) /*!< Endpoint I ram start address register */
#define REG_USBD_EPIBUFEND (USBD_BA+0x1C8) /*!< Endpoint I ram end address register */
#define REG_USBD_EPJDAT (USBD_BA+0x1CC) /*!< Endpoint J data buffer register */
#define REG_USBD_EPJINTSTS (USBD_BA+0x1D0) /*!< Endpoint J interrupt status register */
#define REG_USBD_EPJINTEN (USBD_BA+0x1D4) /*!< Endpoint J interrupt enable register */
#define REG_USBD_EPJDATCNT (USBD_BA+0x1D8) /*!< Data count available in endpoint J buffer */
#define REG_USBD_EPJRSPCTL (USBD_BA+0x1DC) /*!< Endpoint J response register set/clear */
#define REG_USBD_EPJMPS (USBD_BA+0x1E0) /*!< Endpoint J max packet size register */
#define REG_USBD_EPJTXCNT (USBD_BA+0x1E4) /*!< Endpoint J transfer count register */
#define REG_USBD_EPJCFG (USBD_BA+0x1E8) /*!< Endpoint J configuration register */
#define REG_USBD_EPJBUFSTART (USBD_BA+0x1EC) /*!< Endpoint J ram start address register */
#define REG_USBD_EPJBUFEND (USBD_BA+0x1F0) /*!< Endpoint J ram end address register */
#define REG_USBD_EPKDAT (USBD_BA+0x1F4) /*!< Endpoint K data buffer register */
#define REG_USBD_EPKINTSTS (USBD_BA+0x1F8) /*!< Endpoint K interrupt status register */
#define REG_USBD_EPKINTEN (USBD_BA+0x1FC) /*!< Endpoint K interrupt enable register */
#define REG_USBD_EPKDATCNT (USBD_BA+0x200) /*!< Data count available in endpoint K buffer */
#define REG_USBD_EPKRSPCTL (USBD_BA+0x204) /*!< Endpoint K response register set/clear */
#define REG_USBD_EPKMPS (USBD_BA+0x208) /*!< Endpoint K max packet size register */
#define REG_USBD_EPKTXCNT (USBD_BA+0x20C) /*!< Endpoint K transfer count register */
#define REG_USBD_EPKCFG (USBD_BA+0x210) /*!< Endpoint K configuration register */
#define REG_USBD_EPKBUFSTART (USBD_BA+0x214) /*!< Endpoint K ram start address register */
#define REG_USBD_EPKBUFEND (USBD_BA+0x218) /*!< Endpoint K ram end address register */
#define REG_USBD_EPLDAT (USBD_BA+0x21C) /*!< Endpoint L data buffer register */
#define REG_USBD_EPLINTSTS (USBD_BA+0x220) /*!< Endpoint L interrupt status register */
#define REG_USBD_EPLINTEN (USBD_BA+0x224) /*!< Endpoint L interrupt enable register */
#define REG_USBD_EPLDATCNT (USBD_BA+0x228) /*!< Data count available in endpoint L buffer */
#define REG_USBD_EPLRSPCTL (USBD_BA+0x22C) /*!< Endpoint L response register set/clear */
#define REG_USBD_EPLMPS (USBD_BA+0x230) /*!< Endpoint L max packet size register */
#define REG_USBD_EPLTXCNT (USBD_BA+0x234) /*!< Endpoint L transfer count register */
#define REG_USBD_EPLCFG (USBD_BA+0x238) /*!< Endpoint L configuration register */
#define REG_USBD_EPLBUFSTART (USBD_BA+0x23C) /*!< Endpoint L ram start address register */
#define REG_USBD_EPLBUFEND (USBD_BA+0x240) /*!< Endpoint L ram end address register */
#define REG_USBD_DMAADDR (USBD_BA+0x700) /*!< AHB_DMA address register */
#define REG_USBD_PHYCTL (USBD_BA+0x704) /*!< USB PHY control register */
/**@}*/ /* end of USBD register group */
/*---------------------- LCD Display Interface Controller -------------------------*/
/**
@addtogroup LCM LCD Display Interface Controller(LCM)
Memory Mapped Structure for LCM Controller
@{ */
#define REG_LCM_DCCS (LCM_BA+0x00) /*!< Display Controller Control/Status Register */
#define REG_LCM_DEV_CTRL (LCM_BA+0x04) /*!< Display Output Device Control Register */
#define REG_LCM_MPU_CMD (LCM_BA+0x08) /*!< MPU-Interface LCD Write Command */
#define REG_LCM_INT_CS (LCM_BA+0x0c) /*!< Interrupt Control/Status Register */
#define REG_LCM_CRTC_SIZE (LCM_BA+0x10) /*!< CRTC Display Size Control Register */
#define REG_LCM_CRTC_DEND (LCM_BA+0x14) /*!< CRTC Display Enable End */
#define REG_LCM_CRTC_HR (LCM_BA+0x18) /*!< CRTC Internal Horizontal Retrace Control Register */
#define REG_LCM_CRTC_HSYNC (LCM_BA+0x1C) /*!< CRTC Horizontal Sync Control Register */
#define REG_LCM_CRTC_VR (LCM_BA+0x20) /*!< CRTC Internal Vertical Retrace Control Register */
#define REG_LCM_VA_BADDR0 (LCM_BA+0x24) /*!< Video Stream Frame Buffer-0 Starting Address */
#define REG_LCM_VA_BADDR1 (LCM_BA+0x28) /*!< Video Stream Frame Buffer-1 Starting Address */
#define REG_LCM_VA_FBCTRL (LCM_BA+0x2C) /*!< Video Stream Frame Buffer Control Register */
#define REG_LCM_VA_SCALE (LCM_BA+0x30) /*!< Video Stream Scaling Control Register */
#define REG_LCM_VA_WIN (LCM_BA+0x38) /*!< Image Stream Active Window Coordinates */
#define REG_LCM_VA_STUFF (LCM_BA+0x3C) /*!< Image Stream Stuff Pixel */
#define REG_LCM_OSD_WINS (LCM_BA+0x40) /*!< OSD Window Starting Coordinates */
#define REG_LCM_OSD_WINE (LCM_BA+0x44) /*!< OSD Window Ending Coordinates */
#define REG_LCM_OSD_BADDR (LCM_BA+0x48) /*!< OSD Stream Frame Buffer Starting Address */
#define REG_LCM_OSD_FBCTRL (LCM_BA+0x4c) /*!< OSD Stream Frame Buffer Control Register */
#define REG_LCM_OSD_OVERLAY (LCM_BA+0x50) /*!< OSD Overlay Control Register */
#define REG_LCM_OSD_CKEY (LCM_BA+0x54) /*!< OSD Overlay Color-Key Pattern Register */
#define REG_LCM_OSD_CMASK (LCM_BA+0x58) /*!< OSD Overlay Color-Key Mask Register */
#define REG_LCM_OSD_SKIP1 (LCM_BA+0x5C) /*!< OSD Window Skip1 Register */
#define REG_LCM_OSD_SKIP2 (LCM_BA+0x60) /*!< OSD Window Skip2 Register */
#define REG_LCM_OSD_SCALE (LCM_BA+0x64) /*!< OSD horizontal up scaling control register */
#define REG_LCM_MPU_VSYNC (LCM_BA+0x68) /*!< MPU Vsync control register */
#define REG_LCM_HC_CTRL (LCM_BA+0x6C) /*!< Hardware cursor control Register */
#define REG_LCM_HC_POS (LCM_BA+0x70) /*!< Hardware cursot tip point potison on va picture */
#define REG_LCM_HC_WBCTRL (LCM_BA+0x74) /*!< Hardware Cursor Window Buffer Control Register */
#define REG_LCM_HC_BADDR (LCM_BA+0x78) /*!< Hardware cursor memory base address register */
#define REG_LCM_HC_COLOR0 (LCM_BA+0x7C) /*!< Hardware cursor color ram register mapped to bpp = 0 */
#define REG_LCM_HC_COLOR1 (LCM_BA+0x80) /*!< Hardware cursor color ram register mapped to bpp = 1 */
#define REG_LCM_HC_COLOR2 (LCM_BA+0x84) /*!< Hardware cursor color ram register mapped to bpp = 2 */
#define REG_LCM_HC_COLOR3 (LCM_BA+0x88) /*!< Hardware cursor color ram register mapped to bpp = 3 */
/**@}*/ /* end of LCM register group */
/*---------------------- I2S Interface Controller -------------------------*/
/**
@addtogroup I2S I2S Interface Controller(I2S)
Memory Mapped Structure for I2S Controller
@{ */
#define REG_ACTL_CON (ACTL_BA+0x00) /*!< Audio controller control register */
#define REG_ACTL_RESET (ACTL_BA+0x04) /*!< Sub block reset control register */
#define REG_ACTL_RDESB (ACTL_BA+0x08) /*!< DMA destination base address register for record */
#define REG_ACTL_RDES_LENGTH (ACTL_BA+0x0C) /*!< DMA destination length register for record */
#define REG_ACTL_RDESC (ACTL_BA+0x10) /*!< DMA destination current address for record */
#define REG_ACTL_PDESB (ACTL_BA+0x14) /*!< DMA destination current address for play */
#define REG_ACTL_PDES_LENGTH (ACTL_BA+0x18) /*!< DMA destination length register for play */
#define REG_ACTL_PDESC (ACTL_BA+0x1C) /*!< DMA destination current address register for play */
#define REG_ACTL_RSR (ACTL_BA+0x20) /*!< Record status register */
#define REG_ACTL_PSR (ACTL_BA+0x24) /*!< Play status register */
#define REG_ACTL_I2SCON (ACTL_BA+0x28) /*!< I2S control register */
#define REG_ACTL_COUNTER (ACTL_BA+0x2C) /*!< DMA count down values */
#define REG_ACTL_PCMCON (ACTL_BA+0x30) /*!< PCM interface control register */
#define REG_ACTL_PCMS1ST (ACTL_BA+0x34) /*!< PCM interface slot1 start register */
#define REG_ACTL_PCMS2ST (ACTL_BA+0x38) /*!< PCM interface slot2 start register */
#define REG_ACTL_RDESB2 (ACTL_BA+0x40) /*!< DMA destination base address register for record right channel */
#define REG_ACTL_PDESB2 (ACTL_BA+0x44) /*!< DMA destination base address register for play right channel */
/**@}*/ /* end of I2S register group */
/*---------------------- 2D Graphic Engine -------------------------*/
/**
@addtogroup GE2D 2D Graphic Engine(GE2D)
Memory Mapped Structure for GE2D Controller
@{ */
#define REG_GE2D_TRG (GE_BA+0x00) /*!< Graphic Engine Trigger Control Register */
#define REG_GE2D_XYSORG (GE_BA+0x04) /*!< Graphic Engine XY Mode Source Origin Starting Register */
#define REG_GE2D_TCNTVHSF (GE_BA+0x08) /*!< Graphic Engine Tile Width/Height or V/H Scale Factor N/M */
#define REG_GE2D_XYRRP (GE_BA+0x0C) /*!< Graphic Engine Rotate Reference Point XY Address */
#define REG_GE2D_INTSTS (GE_BA+0x10) /*!< Graphic Engine Interrupt Status Register */
#define REG_GE2D_PATSA (GE_BA+0x14) /*!< Graphic Engine Pattern Location Starting Address Register */
#define REG_GE2D_BETSC (GE_BA+0x18) /*!< GE Bresenham Error Term Stepping Constant Register */
#define REG_GE2D_BIEPC (GE_BA+0x1C) /*!< GE Bresenham Initial Error, Pixel Count Major M Register */
#define REG_GE2D_CTL (GE_BA+0x20) /*!< Graphic Engine Control Register */
#define REG_GE2D_BGCOLR (GE_BA+0x24) /*!< Graphic Engine Background Color Register */
#define REG_GE2D_FGCOLR (GE_BA+0x28) /*!< Graphic Engine Foreground Color Register */
#define REG_GE2D_TRNSCOLR (GE_BA+0x2C) /*!< Graphic Engine Transparency Color Register */
#define REG_GE2D_TCMSK (GE_BA+0x30) /*!< Graphic Engine Transparency Color Mask Register */
#define REG_GE2D_XYDORG (GE_BA+0x34) /*!< Graphic Engine XY Mode Display Origin Starting Register */
#define REG_GE2D_SDPITCH (GE_BA+0x38) /*!< Graphic Engine Source/Destination Pitch Register */
#define REG_GE2D_SRCSPA (GE_BA+0x3C) /*!< Graphic Engine Source Start XY/Linear Address Register */
#define REG_GE2D_DSTSPA (GE_BA+0x40) /*!< Graphic Engine Destination Start XY/Linear Register */
#define REG_GE2D_RTGLSZ (GE_BA+0x44) /*!< Graphic Engine Dimension XY/Linear Register */
#define REG_GE2D_CLPBTL (GE_BA+0x48) /*!< Graphic Engine Clipping Boundary Top/Left Register */
#define REG_GE2D_CLPBBR (GE_BA+0x4C) /*!< Graphic Engine Clipping Boundary Bottom/Right Register */
#define REG_GE2D_PTNA (GE_BA+0x50) /*!< Graphic Engine Pattern A Register */
#define REG_GE2D_PTNB (GE_BA+0x54) /*!< Graphic Engine Pattern B Register */
#define REG_GE2D_WRPLNMSK (GE_BA+0x58) /*!< Graphic Engine Write Plane Mask Register */
#define REG_GE2D_MISCTL (GE_BA+0x5C) /*!< Graphic Engine Miscellaneous Control Register */
#define REG_GE2D_GEHBDW0 (GE_BA+0x60) /*!< Graphic Engine HostBLT data Port 0 Register */
#define REG_GE2D_GEHBDW1 (GE_BA+0x64) /*!< Graphic Engine HostBLT data Port 1 Register */
#define REG_GE2D_GEHBDW2 (GE_BA+0x68) /*!< Graphic Engine HostBLT data Port 2 Register */
#define REG_GE2D_GEHBDW3 (GE_BA+0x6C) /*!< Graphic Engine HostBLT data Port 3 Register */
#define REG_GE2D_GEHBDW4 (GE_BA+0x70) /*!< Graphic Engine HostBLT data Port 4 Register */
#define REG_GE2D_GEHBDW5 (GE_BA+0x74) /*!< Graphic Engine HostBLT data Port 5 Register */
#define REG_GE2D_GEHBDW6 (GE_BA+0x78) /*!< Graphic Engine HostBLT data Port 6 Register */
#define REG_GE2D_GEHBDW7 (GE_BA+0x7C) /*!< Graphic Engine HostBLT data Port 7 Register */
/**@}*/ /* end of GE2D register group */
/*---------------------- Flash Memory Interface -------------------------*/
/**
@addtogroup FMI Flash Memory Interface(FMI)
Memory Mapped Structure for FMI Controller
@{ */
/* DMAC Control Registers*/
#define REG_FMI_BUFFER (FMI_BA+0x000) /*!< FMI Embedded Buffer Word */
#define REG_FMI_DMACTL (FMI_BA+0x400) /*!< FMI DMA Control Register */
#define REG_FMI_DMASA (FMI_BA+0x408) /*!< FMI DMA Transfer Starting Address Register */
#define REG_FMI_DMABCNT (FMI_BA+0x40C) /*!< FMI DMA Transfer Byte Count Register */
#define REG_FMI_DMAINTEN (FMI_BA+0x410) /*!< FMI DMA Interrupt Enable Register */
#define REG_FMI_DMAINTSTS (FMI_BA+0x414) /*!< FMI DMA Interrupt Status Register */
#define REG_FMI_CTL (FMI_BA+0x800) /*!< Global Control and Status Register */
#define REG_FMI_INTEN (FMI_BA+0x804) /*!< Global Interrupt Control Register */
#define REG_FMI_INTSTS (FMI_BA+0x808) /*!< Global Interrupt Status Register */
/* eMMC Registers */
#define REG_FMI_EMMCCTL (FMI_BA+0x820) /*!< eMMC control and status register */
#define REG_FMI_EMMCCMD (FMI_BA+0x824) /*!< eMMC command argument register */
#define REG_FMI_EMMCINTEN (FMI_BA+0x828) /*!< eMMC interrupt enable register */
#define REG_FMI_EMMCINTSTS (FMI_BA+0x82C) /*!< eMMC interrupt status register */
#define REG_FMI_EMMCRESP0 (FMI_BA+0x830) /*!< eMMC receive response token register 0 */
#define REG_FMI_EMMCRESP1 (FMI_BA+0x834) /*!< eMMC receive response token register 1 */
#define REG_FMI_EMMCBLEN (FMI_BA+0x838) /*!< eMMC block length register */
#define REG_FMI_EMMCTOUT (FMI_BA+0x83C) /*!< eMMC block length register */
/* NAND-type Flash Registers */
#define REG_NANDCTL (FMI_BA+0x8A0) /*!< NAND Flash Control and Status Register */
#define REG_NANDTMCTL (FMI_BA+0x8A4) /*!< NAND Flash Timing Control Register */
#define REG_NANDINTEN (FMI_BA+0x8A8) /*!< NAND Flash Interrupt Control Register */
#define REG_NANDINTSTS (FMI_BA+0x8AC) /*!< NAND Flash Interrupt Status Register */
#define REG_NANDCMD (FMI_BA+0x8B0) /*!< NAND Flash Command Port Register */
#define REG_NANDADDR (FMI_BA+0x8B4) /*!< NAND Flash Address Port Register */
#define REG_NANDDATA (FMI_BA+0x8B8) /*!< NAND Flash Data Port Register */
#define REG_NANDRACTL (FMI_BA+0x8BC) /*!< NAND Flash Redundant Area Control Register */
#define REG_NANDECTL (FMI_BA+0x8C0) /*!< NAND Flash Extend Control Regsiter */
#define REG_NANDECCES0 (FMI_BA+0x8D0) /*!< NAND Flash ECC Error Status 0 */
#define REG_NANDECCES1 (FMI_BA+0x8D4) /*!< NAND Flash ECC Error Status 1 */
#define REG_NANDECCES2 (FMI_BA+0x8D8) /*!< NAND Flash ECC Error Status 2 */
#define REG_NANDECCES3 (FMI_BA+0x8DC) /*!< NAND Flash ECC Error Status 3 */
#define REG_NANDPROTA0 (FMI_BA+0x8E0) /*!< NAND Flash Protect Region End Address 0 */
#define REG_NANDPROTA1 (FMI_BA+0x8E4) /*!< NAND Flash Protect Region End Address 1 */
/* NAND-type Flash BCH Error Address Registers */
#define REG_NANDECCEA0 (FMI_BA+0x900) /*!< NAND Flash ECC Error Byte Address 0 */
#define REG_NANDECCEA1 (FMI_BA+0x904) /*!< NAND Flash ECC Error Byte Address 1 */
#define REG_NANDECCEA2 (FMI_BA+0x908) /*!< NAND Flash ECC Error Byte Address 2 */
#define REG_NANDECCEA3 (FMI_BA+0x90C) /*!< NAND Flash ECC Error Byte Address 3 */
#define REG_NANDECCEA4 (FMI_BA+0x910) /*!< NAND Flash ECC Error Byte Address 4 */
#define REG_NANDECCEA5 (FMI_BA+0x914) /*!< NAND Flash ECC Error Byte Address 5 */
#define REG_NANDECCEA6 (FMI_BA+0x918) /*!< NAND Flash ECC Error Byte Address 6 */
#define REG_NANDECCEA7 (FMI_BA+0x91C) /*!< NAND Flash ECC Error Byte Address 7 */
#define REG_NANDECCEA8 (FMI_BA+0x920) /*!< NAND Flash ECC Error Byte Address 8 */
#define REG_NANDECCEA9 (FMI_BA+0x924) /*!< NAND Flash ECC Error Byte Address 9 */
#define REG_NANDECCEA10 (FMI_BA+0x928) /*!< NAND Flash ECC Error Byte Address 10 */
#define REG_NANDECCEA11 (FMI_BA+0x92C) /*!< NAND Flash ECC Error Byte Address 11 */
/* NAND-type Flash BCH Error Data Registers */
#define REG_NANDECCED0 (FMI_BA+0x960) /*!< NAND Flash ECC Error Data Register 0 */
#define REG_NANDECCED1 (FMI_BA+0x964) /*!< NAND Flash ECC Error Data Register 1 */
#define REG_NANDECCED2 (FMI_BA+0x968) /*!< NAND Flash ECC Error Data Register 2 */
#define REG_NANDECCED3 (FMI_BA+0x96C) /*!< NAND Flash ECC Error Data Register 3 */
#define REG_NANDECCED4 (FMI_BA+0x970) /*!< NAND Flash ECC Error Data Register 4 */
#define REG_NANDECCED5 (FMI_BA+0x974) /*!< NAND Flash ECC Error Data Register 5 */
/* NAND-type Flash Redundant Area Registers */
#define REG_NANDRA0 (FMI_BA+0xA00) /*!< NAND Flash Redundant Area Register */
#define REG_NANDRA1 (FMI_BA+0xA04) /*!< NAND Flash Redundant Area Register */
/**@}*/ /* end of FMI register group */
/*---------------------- SD/SDIO Host Controller -------------------------*/
/**
@addtogroup SDH SD/SDIO Host Controller(SDH)
Memory Mapped Structure for SDH Controller
@{ */
/* DMAC Control Registers*/
#define REG_SDH_FB0 (SDH_BA+0x000) /*!< SD Host Embedded Buffer Word */
#define REG_SDH_DMACTL (SDH_BA+0x400) /*!< SD Host DMA Control and Status Register */
#define REG_SDH_DMASA (SDH_BA+0x408) /*!< SD Host DMA Transfer Starting Address Register */
#define REG_SDH_DMABCNT (SDH_BA+0x40C) /*!< SD Host DMA Transfer Byte Count Register */
#define REG_SDH_DMAINTEN (SDH_BA+0x410) /*!< SD Host DMA Interrupt Enable Register */
#define REG_SDH_DMAINTSTS (SDH_BA+0x414) /*!< SD Host DMA Interrupt Status Register */
#define REG_SDH_GCTL (SDH_BA+0x800) /*!< SD Host Global Control and Status Register */
#define REG_SDH_GINTEN (SDH_BA+0x804) /*!< SD Host Global Interrupt Control Register */
#define REG_SDH_GINTSTS (SDH_BA+0x808) /*!< SD Host Global Interrupt Status Register */
/* Secure Digit Registers */
#define REG_SDH_CTL (SDH_BA+0x820) /*!< SD Host control and status register */
#define REG_SDH_CMD (SDH_BA+0x824) /*!< SD Host command argument register */
#define REG_SDH_INTEN (SDH_BA+0x828) /*!< SD Host interrupt enable register */
#define REG_SDH_INTSTS (SDH_BA+0x82C) /*!< SD Host interrupt status register */
#define REG_SDH_RESP0 (SDH_BA+0x830) /*!< SD Host receive response token register 0 */
#define REG_SDH_RESP1 (SDH_BA+0x834) /*!< SD Host receive response token register 1 */
#define REG_SDH_BLEN (SDH_BA+0x838) /*!< SD Host block length register */
#define REG_SDH_TMOUT (SDH_BA+0x83C) /*!< SD Host Response/Data-in Time-out register */
#define REG_SDH_ECTL (SDH_BA+0x840) /*!< SD Host Extend Control Register */
/**@}*/ /* end of SDH register group */
/*---------------------- Cryptographic Accelerator -------------------------*/
/**
@addtogroup CRYPTO Cryptographic Accelerator(CRYPTO)
Memory Mapped Structure for Cryptographic Accelerator registers
@{ */
/* Crypto Control Registers */
#define CRPT_INTEN (CRPT_BA+0x000) /*!< Crypto Interrupt Enable Control Register */
#define CRPT_INTSTS (CRPT_BA+0x004) /*!< Crypto Interrupt Flag */
/* PRNG Registers */
#define CRPT_PRNG_CTL (CRPT_BA+0x008) /*!< PRNG Control Register */
#define CRPT_PRNG_SEED (CRPT_BA+0x00C) /*!< Seed for PRNG */
#define CRPT_PRNG_KEY0 (CRPT_BA+0x010) /*!< PRNG Generated Key 0 */
#define CRPT_PRNG_KEY1 (CRPT_BA+0x014) /*!< PRNG Generated Key 1 */
#define CRPT_PRNG_KEY2 (CRPT_BA+0x018) /*!< PRNG Generated Key 2 */
#define CRPT_PRNG_KEY3 (CRPT_BA+0x01C) /*!< PRNG Generated Key 3 */
#define CRPT_PRNG_KEY4 (CRPT_BA+0x020) /*!< PRNG Generated Key 4 */
#define CRPT_PRNG_KEY5 (CRPT_BA+0x024) /*!< PRNG Generated Key 5 */
#define CRPT_PRNG_KEY6 (CRPT_BA+0x028) /*!< PRNG Generated Key 6 */
#define CRPT_PRNG_KEY7 (CRPT_BA+0x02C) /*!< PRNG Generated Key 7 */
/* AES/TDES feedback Registers */
#define CRPT_AES_FDBCK0 (CRPT_BA+0x050) /*!< AES Engine Output Feedback Data after Cryptographic Operation */
#define CRPT_AES_FDBCK1 (CRPT_BA+0x054) /*!< AES Engine Output Feedback Data after Cryptographic Operation */
#define CRPT_AES_FDBCK2 (CRPT_BA+0x058) /*!< AES Engine Output Feedback Data after Cryptographic Operation */
#define CRPT_AES_FDBCK3 (CRPT_BA+0x05C) /*!< AES Engine Output Feedback Data after Cryptographic Operation */
#define CRPT_TDES_FDBCKH (CRPT_BA+0x060) /*!< TDES/DES Engine Output Feedback High Word Data after Cryptographic Operation */
#define CRPT_TDES_FDBCKL (CRPT_BA+0x064) /*!< TDES/DES Engine Output Feedback Low Word Data after Cryptographic Operation */
/* AES Control Registers */
#define CRPT_AES_CTL (CRPT_BA+0x100) /*!< AES Control Register */
#define CRPT_AES_STS (CRPT_BA+0x104) /*!< AES Engine Flag */
#define CRPT_AES_DATIN (CRPT_BA+0x108) /*!< AES Engine Data Input Port Register */
#define CRPT_AES_DATOUT (CRPT_BA+0x10C) /*!< AES Engine Data Output Port Register */
#define CRPT_AES0_KEY0 (CRPT_BA+0x110) /*!< AES Key Word 0 Register for Channel 0 */
#define CRPT_AES0_KEY1 (CRPT_BA+0x114) /*!< AES Key Word 1 Register for Channel 0 */
#define CRPT_AES0_KEY2 (CRPT_BA+0x118) /*!< AES Key Word 2 Register for Channel 0 */
#define CRPT_AES0_KEY3 (CRPT_BA+0x11C) /*!< AES Key Word 3 Register for Channel 0 */
#define CRPT_AES0_KEY4 (CRPT_BA+0x120) /*!< AES Key Word 4 Register for Channel 0 */
#define CRPT_AES0_KEY5 (CRPT_BA+0x124) /*!< AES Key Word 5 Register for Channel 0 */
#define CRPT_AES0_KEY6 (CRPT_BA+0x128) /*!< AES Key Word 6 Register for Channel 0 */
#define CRPT_AES0_KEY7 (CRPT_BA+0x12C) /*!< AES Key Word 7 Register for Channel 0 */
#define CRPT_AES0_IV0 (CRPT_BA+0x130) /*!< AES Initial Vector Word 0 Register for Channel 0 */
#define CRPT_AES0_IV1 (CRPT_BA+0x134) /*!< AES Initial Vector Word 1 Register for Channel 0 */
#define CRPT_AES0_IV2 (CRPT_BA+0x138) /*!< AES Initial Vector Word 2 Register for Channel 0 */
#define CRPT_AES0_IV3 (CRPT_BA+0x13C) /*!< AES Initial Vector Word 3 Register for Channel 0 */
#define CRPT_AES0_SADDR (CRPT_BA+0x140) /*!< AES DMA Source Address Register for Channel 0 */
#define CRPT_AES0_DADDR (CRPT_BA+0x144) /*!< AES DMA Destination Address Register for Channel 0 */
#define CRPT_AES0_CNT (CRPT_BA+0x148) /*!< AES Byte Count Register for Channel 0 */
#define CRPT_AES1_KEY0 (CRPT_BA+0x14C) /*!< AES Key Word 0 Register for Channel 1 */
#define CRPT_AES1_KEY1 (CRPT_BA+0x150) /*!< AES Key Word 1 Register for Channel 1 */
#define CRPT_AES1_KEY2 (CRPT_BA+0x154) /*!< AES Key Word 2 Register for Channel 1 */
#define CRPT_AES1_KEY3 (CRPT_BA+0x158) /*!< AES Key Word 3 Register for Channel 1 */
#define CRPT_AES1_KEY4 (CRPT_BA+0x15C) /*!< AES Key Word 4 Register for Channel 1 */
#define CRPT_AES1_KEY5 (CRPT_BA+0x160) /*!< AES Key Word 5 Register for Channel 1 */
#define CRPT_AES1_KEY6 (CRPT_BA+0x164) /*!< AES Key Word 6 Register for Channel 1 */
#define CRPT_AES1_KEY7 (CRPT_BA+0x168) /*!< AES Key Word 7 Register for Channel 1 */
#define CRPT_AES1_IV0 (CRPT_BA+0x16C) /*!< AES Initial Vector Word 0 Register for Channel 1 */
#define CRPT_AES1_IV1 (CRPT_BA+0x170) /*!< AES Initial Vector Word 1 Register for Channel 1 */
#define CRPT_AES1_IV2 (CRPT_BA+0x174) /*!< AES Initial Vector Word 2 Register for Channel 1 */
#define CRPT_AES1_IV3 (CRPT_BA+0x178) /*!< AES Initial Vector Word 3 Register for Channel 1 */
#define CRPT_AES1_SADDR (CRPT_BA+0x17C) /*!< AES DMA Source Address Register for Channel 1 */
#define CRPT_AES1_DADDR (CRPT_BA+0x180) /*!< AES DMA Destination Address Register for Channel 1 */
#define CRPT_AES1_CNT (CRPT_BA+0x184) /*!< AES Byte Count Register for Channel 1 */
#define CRPT_AES2_KEY0 (CRPT_BA+0x188) /*!< AES Key Word 0 Register for Channel 2 */
#define CRPT_AES2_KEY1 (CRPT_BA+0x18C) /*!< AES Key Word 1 Register for Channel 2 */
#define CRPT_AES2_KEY2 (CRPT_BA+0x190) /*!< AES Key Word 2 Register for Channel 2 */
#define CRPT_AES2_KEY3 (CRPT_BA+0x194) /*!< AES Key Word 3 Register for Channel 2 */
#define CRPT_AES2_KEY4 (CRPT_BA+0x198) /*!< AES Key Word 4 Register for Channel 2 */
#define CRPT_AES2_KEY5 (CRPT_BA+0x19C) /*!< AES Key Word 5 Register for Channel 2 */
#define CRPT_AES2_KEY6 (CRPT_BA+0x1A0) /*!< AES Key Word 6 Register for Channel 2 */
#define CRPT_AES2_KEY7 (CRPT_BA+0x1A4) /*!< AES Key Word 7 Register for Channel 2 */
#define CRPT_AES2_IV0 (CRPT_BA+0x1A8) /*!< AES Initial Vector Word 0 Register for Channel 2 */
#define CRPT_AES2_IV1 (CRPT_BA+0x1AC) /*!< AES Initial Vector Word 1 Register for Channel 2 */
#define CRPT_AES2_IV2 (CRPT_BA+0x1B0) /*!< AES Initial Vector Word 2 Register for Channel 2 */
#define CRPT_AES2_IV3 (CRPT_BA+0x1B4) /*!< AES Initial Vector Word 3 Register for Channel 2 */
#define CRPT_AES2_SADDR (CRPT_BA+0x1B8) /*!< AES DMA Source Address Register for Channel 2 */
#define CRPT_AES2_DADDR (CRPT_BA+0x1BC) /*!< AES DMA Destination Address Register for Channel 2 */
#define CRPT_AES2_CNT (CRPT_BA+0x1C0) /*!< AES Byte Count Register for Channel 2 */
#define CRPT_AES3_KEY0 (CRPT_BA+0x1C4) /*!< AES Key Word 0 Register for Channel 3 */
#define CRPT_AES3_KEY1 (CRPT_BA+0x1C8) /*!< AES Key Word 1 Register for Channel 3 */
#define CRPT_AES3_KEY2 (CRPT_BA+0x1CC) /*!< AES Key Word 2 Register for Channel 3 */
#define CRPT_AES3_KEY3 (CRPT_BA+0x1D0) /*!< AES Key Word 3 Register for Channel 3 */
#define CRPT_AES3_KEY4 (CRPT_BA+0x1D4) /*!< AES Key Word 4 Register for Channel 3 */
#define CRPT_AES3_KEY5 (CRPT_BA+0x1D8) /*!< AES Key Word 5 Register for Channel 3 */
#define CRPT_AES3_KEY6 (CRPT_BA+0x1DC) /*!< AES Key Word 6 Register for Channel 3 */
#define CRPT_AES3_KEY7 (CRPT_BA+0x1E0) /*!< AES Key Word 7 Register for Channel 3 */
#define CRPT_AES3_IV0 (CRPT_BA+0x1E4) /*!< AES Initial Vector Word 0 Register for Channel 3 */
#define CRPT_AES3_IV1 (CRPT_BA+0x1E8) /*!< AES Initial Vector Word 1 Register for Channel 3 */
#define CRPT_AES3_IV2 (CRPT_BA+0x1EC) /*!< AES Initial Vector Word 2 Register for Channel 3 */
#define CRPT_AES3_IV3 (CRPT_BA+0x1F0) /*!< AES Initial Vector Word 3 Register for Channel 3 */
#define CRPT_AES3_SADDR (CRPT_BA+0x1F4) /*!< AES DMA Source Address Register for Channel 3 */
#define CRPT_AES3_DADDR (CRPT_BA+0x1F8) /*!< AES DMA Destination Address Register for Channel 3 */
#define CRPT_AES3_CNT (CRPT_BA+0x1FC) /*!< AES Byte Count Register for Channel 3 */
/* DES/TDES Control Registers */
#define CRPT_TDES_CTL (CRPT_BA+0x200) /*!< TDES/DES Control Register */
#define CRPT_TDES_STS (CRPT_BA+0x204) /*!< TDES/DES Engine Flag */
#define CRPT_TDES0_KEY1H (CRPT_BA+0x208) /*!< TDES/DES Key 1 High Word Register for Channel 0 */
#define CRPT_TDES0_KEY1L (CRPT_BA+0x20C) /*!< TDES/DES Key 1 Low Word Register for Channel 0 */
#define CRPT_TDES0_KEY2H (CRPT_BA+0x210) /*!< TDES/DES Key 2 High Word Register for Channel 0 */
#define CRPT_TDES0_KEY2L (CRPT_BA+0x214) /*!< TDES/DES Key 2 Low Word Register for Channel 0 */
#define CRPT_TDES0_KEY3H (CRPT_BA+0x218) /*!< TDES/DES Key 3 High Word Register for Channel 0 */
#define CRPT_TDES0_KEY3L (CRPT_BA+0x21C) /*!< TDES/DES Key 3 Low Word Register for Channel 0 */
#define CRPT_TDES0_IVH (CRPT_BA+0x220) /*!< TDES/DES Initial Vector High Word Register for Channel 0 */
#define CRPT_TDES0_IVL (CRPT_BA+0x224) /*!< TDES/DES Initial Vector Low Word Register for Channel 0 */
#define CRPT_TDES0_SADDR (CRPT_BA+0x228) /*!< TDES/DES DMA Source Address Register for Channel 0 */
#define CRPT_TDES0_DADDR (CRPT_BA+0x22C) /*!< TDES/DES DMA Destination Address Register for Channel 0 */
#define CRPT_TDES0_CNT (CRPT_BA+0x230) /*!< TDES/DES Byte Count Register for Channel 0 */
#define CRPT_TDES_DATIN (CRPT_BA+0x234) /*!< TDES/DES Engine Input data Word Register */
#define CRPT_TDES_DATOUT (CRPT_BA+0x238) /*!< TDES/DES Engine Output data Word Register */
#define CRPT_TDES1_KEY1H (CRPT_BA+0x248) /*!< TDES/DES Key 1 High Word Register for Channel 1 */
#define CRPT_TDES1_KEY1L (CRPT_BA+0x24C) /*!< TDES/DES Key 1 Low Word Register for Channel 1 */
#define CRPT_TDES1_KEY2H (CRPT_BA+0x250) /*!< TDES/DES Key 2 High Word Register for Channel 1 */
#define CRPT_TDES1_KEY2L (CRPT_BA+0x254) /*!< TDES/DES Key 2 Low Word Register for Channel 1 */
#define CRPT_TDES1_KEY3H (CRPT_BA+0x258) /*!< TDES/DES Key 3 High Word Register for Channel 1 */
#define CRPT_TDES1_KEY3L (CRPT_BA+0x25C) /*!< TDES/DES Key 3 Low Word Register for Channel 1 */
#define CRPT_TDES1_IVH (CRPT_BA+0x260) /*!< TDES/DES Initial Vector High Word Register for Channel 1 */
#define CRPT_TDES1_IVL (CRPT_BA+0x264) /*!< TDES/DES Initial Vector Low Word Register for Channel 1 */
#define CRPT_TDES1_SADDR (CRPT_BA+0x268) /*!< TDES/DES DMA Source Address Register for Channel 1 */
#define CRPT_TDES1_DADDR (CRPT_BA+0x26C) /*!< TDES/DES DMA Destination Address Register for Channel 1 */
#define CRPT_TDES1_CNT (CRPT_BA+0x270) /*!< TDES/DES Byte Count Register for Channel 1 */
#define CRPT_TDES2_KEY1H (CRPT_BA+0x288) /*!< TDES/DES Key 1 High Word Register for Channel 2 */
#define CRPT_TDES2_KEY1L (CRPT_BA+0x28C) /*!< TDES/DES Key 1 Low Word Register for Channel 2 */
#define CRPT_TDES2_KEY2H (CRPT_BA+0x290) /*!< TDES/DES Key 2 High Word Register for Channel 2 */
#define CRPT_TDES2_KEY2L (CRPT_BA+0x294) /*!< TDES/DES Key 2 Low Word Register for Channel 2 */
#define CRPT_TDES2_KEY3H (CRPT_BA+0x298) /*!< TDES/DES Key 3 High Word Register for Channel 2 */
#define CRPT_TDES2_KEY3L (CRPT_BA+0x29C) /*!< TDES/DES Key 3 Low Word Register for Channel 2 */
#define CRPT_TDES2_IVH (CRPT_BA+0x2A0) /*!< TDES/DES Initial Vector High Word Register for Channel 2 */
#define CRPT_TDES2_IVL (CRPT_BA+0x2A4) /*!< TDES/DES Initial Vector Low Word Register for Channel 2 */
#define CRPT_TDES2_SADDR (CRPT_BA+0x2A8) /*!< TDES/DES DMA Source Address Register for Channel 2 */
#define CRPT_TDES2_DADDR (CRPT_BA+0x2AC) /*!< TDES/DES DMA Destination Address Register for Channel 2 */
#define CRPT_TDES2_CNT (CRPT_BA+0x2B0) /*!< TDES/DES Byte Count Register for Channel 3 */
#define CRPT_TDES3_KEY1H (CRPT_BA+0x2C8) /*!< TDES/DES Key 1 High Word Register for Channel 3 */
#define CRPT_TDES3_KEY1L (CRPT_BA+0x2CC) /*!< TDES/DES Key 1 Low Word Register for Channel 3 */
#define CRPT_TDES3_KEY2H (CRPT_BA+0x2D0) /*!< TDES/DES Key 2 High Word Register for Channel 3 */
#define CRPT_TDES3_KEY2L (CRPT_BA+0x2D4) /*!< TDES/DES Key 2 Low Word Register for Channel 3 */
#define CRPT_TDES3_KEY3H (CRPT_BA+0x2D8) /*!< TDES/DES Key 3 High Word Register for Channel 3 */
#define CRPT_TDES3_KEY3L (CRPT_BA+0x2DC) /*!< TDES/DES Key 3 Low Word Register for Channel 3 */
#define CRPT_TDES3_IVH (CRPT_BA+0x2E0) /*!< TDES/DES Initial Vector High Word Register for Channel 3 */
#define CRPT_TDES3_IVL (CRPT_BA+0x2E4) /*!< TDES/DES Initial Vector Low Word Register for Channel 3 */
#define CRPT_TDES3_SADDR (CRPT_BA+0x2E8) /*!< TDES/DES DMA Source Address Register for Channel 3 */
#define CRPT_TDES3_DADDR (CRPT_BA+0x2EC) /*!< TDES/DES DMA Destination Address Register for Channel 3 */
#define CRPT_TDES3_CNT (CRPT_BA+0x2F0) /*!< TDES/DES Byte Count Register for Channel 3 */
/* SHA/HMAC Control Registers */
#define CRPT_HMAC_CTL (CRPT_BA+0x300) /*!< SHA/HMAC Control Register */
#define CRPT_HMAC_STS (CRPT_BA+0x304) /*!< SHA/HMAC Status Flag */
#define CRPT_HMAC_DGST0 (CRPT_BA+0x308) /*!< SHA/HMAC Digest Message 0 */
#define CRPT_HMAC_DGST1 (CRPT_BA+0x30C) /*!< SHA/HMAC Digest Message 1 */
#define CRPT_HMAC_DGST2 (CRPT_BA+0x310) /*!< SHA/HMAC Digest Message 2 */
#define CRPT_HMAC_DGST3 (CRPT_BA+0x314) /*!< SHA/HMAC Digest Message 3 */
#define CRPT_HMAC_DGST4 (CRPT_BA+0x318) /*!< SHA/HMAC Digest Message 4 */
#define CRPT_HMAC_DGST5 (CRPT_BA+0x31C) /*!< SHA/HMAC Digest Message 5 */
#define CRPT_HMAC_DGST6 (CRPT_BA+0x320) /*!< SHA/HMAC Digest Message 6 */
#define CRPT_HMAC_DGST7 (CRPT_BA+0x324) /*!< SHA/HMAC Digest Message 7 */
#define CRPT_HMAC_DGST8 (CRPT_BA+0x328) /*!< SHA/HMAC Digest Message 8 */
#define CRPT_HMAC_DGST9 (CRPT_BA+0x32C) /*!< SHA/HMAC Digest Message 8 */
#define CRPT_HMAC_DGST10 (CRPT_BA+0x330) /*!< SHA/HMAC Digest Message 10 */
#define CRPT_HMAC_DGST11 (CRPT_BA+0x334) /*!< SHA/HMAC Digest Message 11 */
#define CRPT_HMAC_DGST12 (CRPT_BA+0x338) /*!< SHA/HMAC Digest Message 12 */
#define CRPT_HMAC_DGST13 (CRPT_BA+0x33C) /*!< SHA/HMAC Digest Message 13 */
#define CRPT_HMAC_DGST14 (CRPT_BA+0x340) /*!< SHA/HMAC Digest Message 14 */
#define CRPT_HMAC_DGST15 (CRPT_BA+0x344) /*!< SHA/HMAC Digest Message 15 */
#define CRPT_HMAC_KEYCNT (CRPT_BA+0x348) /*!< SHA/HMAC Key Byte Count */
#define CRPT_HMAC_SADDR (CRPT_BA+0x34C) /*!< SHA/HMAC Key Byte Count */
#define CRPT_HMAC_DMACNT (CRPT_BA+0x350) /*!< SHA/HMAC Byte Count Register */
#define CRPT_HMAC_DATIN (CRPT_BA+0x354) /*!< SHA/HMAC Engine Non-DMA Mode Data Input Port Register */
/**@}*/ /* end of Cryptographic Accelerator register group */
/*---------------------- Universal Asynchronous Receiver/Transmitter Controller -------------------------*/
/**
@addtogroup UART Universal Asynchronous Receiver/Transmitter Controller(UART)
Memory Mapped Structure for UART Controller
@{ */
#define REG_UART0_RBR (UART0_BA+0x00) /*!< Receive Buffer Register */
#define REG_UART0_THR (UART0_BA+0x00) /*!< Transmit Holding Register */
#define REG_UART0_IER (UART0_BA+0x04) /*!< Interrupt Enable Register */
#define REG_UART0_FCR (UART0_BA+0x08) /*!< FIFO Control Register */
#define REG_UART0_LCR (UART0_BA+0x0C) /*!< Line Control Register */
#define REG_UART0_MCR (UART0_BA+0x10) /*!< Modem Control Register */
#define REG_UART0_MSR (UART0_BA+0x14) /*!< MODEM Status Register */
#define REG_UART0_FSR (UART0_BA+0x18) /*!< FIFO Status Register */
#define REG_UART0_ISR (UART0_BA+0x1C) /*!< Interrupt Status Control Register */
#define REG_UART0_TOR (UART0_BA+0x20) /*!< Time-out Register */
#define REG_UART0_BAUD (UART0_BA+0x24) /*!< Baud Rate Divider Register */
#define REG_UART0_IRCR (UART0_BA+0x28) /*!< IrDA Control Register */
#define REG_UART0_ALT_CSR (UART0_BA+0x2C) /*!< Alternate Control Register */
#define REG_UART0_FUN_SEL (UART0_BA+0x30) /*!< UART Function Select REgister */
#define REG_UART0_LIN_CTL (UART0_BA+0x34) /*!< UART LIN Control Register */
#define REG_UART0_LIN_SR (UART0_BA+0x38) /*!< LIN Status Register */
/*
UART1 Control Registers
*/
#define REG_UART1_RBR (UART1_BA+0x00) /*!< Receive Buffer Register */
#define REG_UART1_THR (UART1_BA+0x00) /*!< Transmit Holding Register */
#define REG_UART1_IER (UART1_BA+0x04) /*!< Interrupt Enable Register */
#define REG_UART1_FCR (UART1_BA+0x08) /*!< FIFO Control Register */
#define REG_UART1_LCR (UART1_BA+0x0C) /*!< Line Control Register */
#define REG_UART1_MCR (UART1_BA+0x10) /*!< Modem Control Register */
#define REG_UART1_MSR (UART1_BA+0x14) /*!< MODEM Status Register */
#define REG_UART1_FSR (UART1_BA+0x18) /*!< FIFO Status Register */
#define REG_UART1_ISR (UART1_BA+0x1C) /*!< Interrupt Status Control Register */
#define REG_UART1_TOR (UART1_BA+0x20) /*!< Time-out Register */
#define REG_UART1_BAUD (UART1_BA+0x24) /*!< Baud Rate Divider Register */
#define REG_UART1_IRCR (UART1_BA+0x28) /*!< IrDA Control Register */
#define REG_UART1_ALT_CSR (UART1_BA+0x2C) /*!< Alternate Control Register */
#define REG_UART1_FUN_SEL (UART1_BA+0x30) /*!< UART Function Select REgister */
#define REG_UART1_LIN_CTL (UART1_BA+0x34) /*!< UART LIN Control Register */
#define REG_UART1_LIN_SR (UART1_BA+0x38) /*!< LIN Status Register */
/*
UART2 Control Registers
*/
#define REG_UART2_RBR (UART2_BA+0x00) /*!< Receive Buffer Register */
#define REG_UART2_THR (UART2_BA+0x00) /*!< Transmit Holding Register */
#define REG_UART2_IER (UART2_BA+0x04) /*!< Interrupt Enable Register */
#define REG_UART2_FCR (UART2_BA+0x08) /*!< FIFO Control Register */
#define REG_UART2_LCR (UART2_BA+0x0C) /*!< Line Control Register */
#define REG_UART2_MCR (UART2_BA+0x10) /*!< Modem Control Register */
#define REG_UART2_MSR (UART2_BA+0x14) /*!< MODEM Status Register */
#define REG_UART2_FSR (UART2_BA+0x18) /*!< FIFO Status Register */
#define REG_UART2_ISR (UART2_BA+0x1C) /*!< Interrupt Status Control Register */
#define REG_UART2_TOR (UART2_BA+0x20) /*!< Time-out Register */
#define REG_UART2_BAUD (UART2_BA+0x24) /*!< Baud Rate Divider Register */
#define REG_UART2_IRCR (UART2_BA+0x28) /*!< IrDA Control Register */
#define REG_UART2_ALT_CSR (UART2_BA+0x2C) /*!< Alternate Control Register */
#define REG_UART2_FUN_SEL (UART2_BA+0x30) /*!< UART Function Select REgister */
#define REG_UART2_LIN_CTL (UART2_BA+0x34) /*!< UART LIN Control Register */
#define REG_UART2_LIN_SR (UART2_BA+0x38) /*!< LIN Status Register */
/*
UART3 Control Registers
*/
#define REG_UART3_RBR (UART3_BA+0x00) /*!< Receive Buffer Register */
#define REG_UART3_THR (UART3_BA+0x00) /*!< Transmit Holding Register */
#define REG_UART3_IER (UART3_BA+0x04) /*!< Interrupt Enable Register */
#define REG_UART3_FCR (UART3_BA+0x08) /*!< FIFO Control Register */
#define REG_UART3_LCR (UART3_BA+0x0C) /*!< Line Control Register */
#define REG_UART3_MCR (UART3_BA+0x10) /*!< Modem Control Register */
#define REG_UART3_MSR (UART3_BA+0x14) /*!< MODEM Status Register */
#define REG_UART3_FSR (UART3_BA+0x18) /*!< FIFO Status Register */
#define REG_UART3_ISR (UART3_BA+0x1C) /*!< Interrupt Status Control Register */
#define REG_UART3_TOR (UART3_BA+0x20) /*!< Time-out Register */
#define REG_UART3_BAUD (UART3_BA+0x24) /*!< Baud Rate Divider Register */
#define REG_UART3_IRCR (UART3_BA+0x28) /*!< IrDA Control Register */
#define REG_UART3_ALT_CSR (UART3_BA+0x2C) /*!< Alternate Control Register */
#define REG_UART3_FUN_SEL (UART3_BA+0x30) /*!< UART Function Select REgister */
#define REG_UART3_LIN_CTL (UART3_BA+0x34) /*!< UART LIN Control Register */
#define REG_UART3_LIN_SR (UART3_BA+0x38) /*!< LIN Status Register */
/*
UART4 Control Registers
*/
#define REG_UART4_RBR (UART4_BA+0x00) /*!< Receive Buffer Register */
#define REG_UART4_THR (UART4_BA+0x00) /*!< Transmit Holding Register */
#define REG_UART4_IER (UART4_BA+0x04) /*!< Interrupt Enable Register */
#define REG_UART4_FCR (UART4_BA+0x08) /*!< FIFO Control Register */
#define REG_UART4_LCR (UART4_BA+0x0C) /*!< Line Control Register */
#define REG_UART4_MCR (UART4_BA+0x10) /*!< Modem Control Register */
#define REG_UART4_MSR (UART4_BA+0x14) /*!< MODEM Status Register */
#define REG_UART4_FSR (UART4_BA+0x18) /*!< FIFO Status Register */
#define REG_UART4_ISR (UART4_BA+0x1C) /*!< Interrupt Status Control Register */
#define REG_UART4_TOR (UART4_BA+0x20) /*!< Time-out Register */
#define REG_UART4_BAUD (UART4_BA+0x24) /*!< Baud Rate Divider Register */
#define REG_UART4_IRCR (UART4_BA+0x28) /*!< IrDA Control Register */
#define REG_UART4_ALT_CSR (UART4_BA+0x2C) /*!< Alternate Control Register */
#define REG_UART4_FUN_SEL (UART4_BA+0x30) /*!< UART Function Select REgister */
#define REG_UART4_LIN_CTL (UART4_BA+0x34) /*!< UART LIN Control Register */
#define REG_UART4_LIN_SR (UART4_BA+0x38) /*!< LIN Status Register */
/*
UART5 Control Registers
*/
#define REG_UART5_RBR (UART5_BA+0x00) /*!< Receive Buffer Register */
#define REG_UART5_THR (UART5_BA+0x00) /*!< Transmit Holding Register */
#define REG_UART5_IER (UART5_BA+0x04) /*!< Interrupt Enable Register */
#define REG_UART5_FCR (UART5_BA+0x08) /*!< FIFO Control Register */
#define REG_UART5_LCR (UART5_BA+0x0C) /*!< Line Control Register */
#define REG_UART5_MCR (UART5_BA+0x10) /*!< Modem Control Register */
#define REG_UART5_MSR (UART5_BA+0x14) /*!< MODEM Status Register */
#define REG_UART5_FSR (UART5_BA+0x18) /*!< FIFO Status Register */
#define REG_UART5_ISR (UART5_BA+0x1C) /*!< Interrupt Status Control Register */
#define REG_UART5_TOR (UART5_BA+0x20) /*!< Time-out Register */
#define REG_UART5_BAUD (UART5_BA+0x24) /*!< Baud Rate Divider Register */
#define REG_UART5_IRCR (UART5_BA+0x28) /*!< IrDA Control Register */
#define REG_UART5_ALT_CSR (UART5_BA+0x2C) /*!< Alternate Control Register */
#define REG_UART5_FUN_SEL (UART5_BA+0x30) /*!< UART Function Select REgister */
#define REG_UART5_LIN_CTL (UART5_BA+0x34) /*!< UART LIN Control Register */
#define REG_UART5_LIN_SR (UART5_BA+0x38) /*!< LIN Status Register */
/*
UART6 Control Registers
*/
#define REG_UART6_RBR (UART6_BA+0x00) /*!< Receive Buffer Register */
#define REG_UART6_THR (UART6_BA+0x00) /*!< Transmit Holding Register */
#define REG_UART6_IER (UART6_BA+0x04) /*!< Interrupt Enable Register */
#define REG_UART6_FCR (UART6_BA+0x08) /*!< FIFO Control Register */
#define REG_UART6_LCR (UART6_BA+0x0C) /*!< Line Control Register */
#define REG_UART6_MCR (UART6_BA+0x10) /*!< Modem Control Register */
#define REG_UART6_MSR (UART6_BA+0x14) /*!< MODEM Status Register */
#define REG_UART6_FSR (UART6_BA+0x18) /*!< FIFO Status Register */
#define REG_UART6_ISR (UART6_BA+0x1C) /*!< Interrupt Status Control Register */
#define REG_UART6_TOR (UART6_BA+0x20) /*!< Time-out Register */
#define REG_UART6_BAUD (UART6_BA+0x24) /*!< Baud Rate Divider Register */
#define REG_UART6_IRCR (UART6_BA+0x28) /*!< IrDA Control Register */
#define REG_UART6_ALT_CSR (UART6_BA+0x2C) /*!< Alternate Control Register */
#define REG_UART6_FUN_SEL (UART6_BA+0x30) /*!< UART Function Select REgister */
#define REG_UART6_LIN_CTL (UART6_BA+0x34) /*!< UART LIN Control Register */
#define REG_UART6_LIN_SR (UART6_BA+0x38) /*!< LIN Status Register */
/*
UART7 Control Registers
*/
#define REG_UART7_RBR (UART7_BA+0x00) /*!< Receive Buffer Register */
#define REG_UART7_THR (UART7_BA+0x00) /*!< Transmit Holding Register */
#define REG_UART7_IER (UART7_BA+0x04) /*!< Interrupt Enable Register */
#define REG_UART7_FCR (UART7_BA+0x08) /*!< FIFO Control Register */
#define REG_UART7_LCR (UART7_BA+0x0C) /*!< Line Control Register */
#define REG_UART7_MCR (UART7_BA+0x10) /*!< Modem Control Register */
#define REG_UART7_MSR (UART7_BA+0x14) /*!< MODEM Status Register */
#define REG_UART7_FSR (UART7_BA+0x18) /*!< FIFO Status Register */
#define REG_UART7_ISR (UART7_BA+0x1C) /*!< Interrupt Status Control Register */
#define REG_UART7_TOR (UART7_BA+0x20) /*!< Time-out Register */
#define REG_UART7_BAUD (UART7_BA+0x24) /*!< Baud Rate Divider Register */
#define REG_UART7_IRCR (UART7_BA+0x28) /*!< IrDA Control Register */
#define REG_UART7_ALT_CSR (UART7_BA+0x2C) /*!< Alternate Control Register */
#define REG_UART7_FUN_SEL (UART7_BA+0x30) /*!< UART Function Select REgister */
#define REG_UART7_LIN_CTL (UART7_BA+0x34) /*!< UART LIN Control Register */
#define REG_UART7_LIN_SR (UART7_BA+0x38) /*!< LIN Status Register */
/*
UART8 Control Registers
*/
#define REG_UART8_RBR (UART8_BA+0x00) /*!< Receive Buffer Register */
#define REG_UART8_THR (UART8_BA+0x00) /*!< Transmit Holding Register */
#define REG_UART8_IER (UART8_BA+0x04) /*!< Interrupt Enable Register */
#define REG_UART8_FCR (UART8_BA+0x08) /*!< FIFO Control Register */
#define REG_UART8_LCR (UART8_BA+0x0C) /*!< Line Control Register */
#define REG_UART8_MCR (UART8_BA+0x10) /*!< Modem Control Register */
#define REG_UART8_MSR (UART8_BA+0x14) /*!< MODEM Status Register */
#define REG_UART8_FSR (UART8_BA+0x18) /*!< FIFO Status Register */
#define REG_UART8_ISR (UART8_BA+0x1C) /*!< Interrupt Status Control Register */
#define REG_UART8_TOR (UART8_BA+0x20) /*!< Time-out Register */
#define REG_UART8_BAUD (UART8_BA+0x24) /*!< Baud Rate Divider Register */
#define REG_UART8_IRCR (UART8_BA+0x28) /*!< IrDA Control Register */
#define REG_UART8_ALT_CSR (UART8_BA+0x2C) /*!< Alternate Control Register */
#define REG_UART8_FUN_SEL (UART8_BA+0x30) /*!< UART Function Select REgister */
#define REG_UART8_LIN_CTL (UART8_BA+0x34) /*!< UART LIN Control Register */
#define REG_UART8_LIN_SR (UART8_BA+0x38) /*!< LIN Status Register */
/*
UART9 Control Registers
*/
#define REG_UART9_RBR (UART9_BA+0x00) /*!< Receive Buffer Register */
#define REG_UART9_THR (UART9_BA+0x00) /*!< Transmit Holding Register */
#define REG_UART9_IER (UART9_BA+0x04) /*!< Interrupt Enable Register */
#define REG_UART9_FCR (UART9_BA+0x08) /*!< FIFO Control Register */
#define REG_UART9_LCR (UART9_BA+0x0C) /*!< Line Control Register */
#define REG_UART9_MCR (UART9_BA+0x10) /*!< Modem Control Register */
#define REG_UART9_MSR (UART9_BA+0x14) /*!< MODEM Status Register */
#define REG_UART9_FSR (UART9_BA+0x18) /*!< FIFO Status Register */
#define REG_UART9_ISR (UART9_BA+0x1C) /*!< Interrupt Status Control Register */
#define REG_UART9_TOR (UART9_BA+0x20) /*!< Time-out Register */
#define REG_UART9_BAUD (UART9_BA+0x24) /*!< Baud Rate Divider Register */
#define REG_UART9_IRCR (UART9_BA+0x28) /*!< IrDA Control Register */
#define REG_UART9_ALT_CSR (UART9_BA+0x2C) /*!< Alternate Control Register */
#define REG_UART9_FUN_SEL (UART9_BA+0x30) /*!< UART Function Select REgister */
#define REG_UART9_LIN_CTL (UART9_BA+0x34) /*!< UART LIN Control Register */
#define REG_UART9_LIN_SR (UART9_BA+0x38) /*!< LIN Status Register */
/*
UARTA Control Registers
*/
#define REG_UARTA_RBR (UARTA_BA+0x00) /*!< Receive Buffer Register */
#define REG_UARTA_THR (UARTA_BA+0x00) /*!< Transmit Holding Register */
#define REG_UARTA_IER (UARTA_BA+0x04) /*!< Interrupt Enable Register */
#define REG_UARTA_FCR (UARTA_BA+0x08) /*!< FIFO Control Register */
#define REG_UARTA_LCR (UARTA_BA+0x0C) /*!< Line Control Register */
#define REG_UARTA_MCR (UARTA_BA+0x10) /*!< Modem Control Register */
#define REG_UARTA_MSR (UARTA_BA+0x14) /*!< MODEM Status Register */
#define REG_UARTA_FSR (UARTA_BA+0x18) /*!< FIFO Status Register */
#define REG_UARTA_ISR (UARTA_BA+0x1C) /*!< Interrupt Status Control Register */
#define REG_UARTA_TOR (UARTA_BA+0x20) /*!< Time-out Register */
#define REG_UARTA_BAUD (UARTA_BA+0x24) /*!< Baud Rate Divider Register */
#define REG_UARTA_IRCR (UARTA_BA+0x28) /*!< IrDA Control Register */
#define REG_UARTA_ALT_CSR (UARTA_BA+0x2C) /*!< Alternate Control Register */
#define REG_UARTA_FUN_SEL (UARTA_BA+0x30) /*!< UART Function Select REgister */
#define REG_UARTA_LIN_CTL (UARTA_BA+0x34) /*!< UART LIN Control Register */
#define REG_UARTA_LIN_SR (UARTA_BA+0x38) /*!< LIN Status Register */
/**@}*/ /* end of UART register group */
/*---------------------- Timer Controller -------------------------*/
/**
@addtogroup TIMER Timer Controller(TIMER)
Memory Mapped Structure for TIMER Controller
@{ */
#define REG_TMR0_CSR (TMR0_BA+0x00) /*!< Timer Control and Status Register 0 */
#define REG_TMR0_CMPR (TMR0_BA+0x04) /*!< Timer Compare Register 0 */
#define REG_TMR0_DR (TMR0_BA+0x08) /*!< Timer Data Register 0 */
#define REG_TMR1_CSR (TMR1_BA+0x00) /*!< Timer Control and Status Register 1 */
#define REG_TMR1_CMPR (TMR1_BA+0x04) /*!< Timer Compare Register 1 */
#define REG_TMR1_TDR (TMR1_BA+0x08) /*!< Timer Data Register 1 */
#define REG_TMR2_CSR (TMR2_BA+0x00) /*!< Timer Control and Status Register 2 */
#define REG_TMR2_CMPR (TMR2_BA+0x04) /*!< Timer Compare Register 2 */
#define REG_TMR2_DR (TMR2_BA+0x08) /*!< Timer Data Register 2 */
#define REG_TMR3_CSR (TMR3_BA+0x00) /*!< Timer Control and Status Register 3 */
#define REG_TMR3_CMPR (TMR3_BA+0x04) /*!< Timer Compare Register 3 */
#define REG_TMR3_DR (TMR3_BA+0x08) /*!< Timer Data Register 3 */
#define REG_TMR4_CSR (TMR4_BA+0x00) /*!< Timer Control and Status Register 4 */
#define REG_TMR4_CMPR (TMR4_BA+0x04) /*!< Timer Compare Register 4 */
#define REG_TMR4_DR (TMR4_BA+0x08) /*!< Timer Data Register 4 */
#define REG_TMR_ISR (TMR0_BA+0x60) /*!< Timer Interrupt Status Register */
/**@}*/ /* end of TIMER register group */
/*---------------------- Enhance Timer Controller -------------------------*/
/**
@addtogroup ETIMER Enhance Timer Controller(ETIMER)
Memory Mapped Structure for TIMER Controller
@{ */
#define REG_ETMR0_CTL (ETMR0_BA+0x00) /*!< Enhance Timer 0 Control Register */
#define REG_ETMR0_PRECNT (ETMR0_BA+0x04) /*!< Enhance Timer 0 Pre-Scale Counter Register */
#define REG_ETMR0_CMPR (ETMR0_BA+0x08) /*!< Enhance Timer 0 Compare Register */
#define REG_ETMR0_IER (ETMR0_BA+0x0C) /*!< Enhance Timer 0 Interrupt Enable Register */
#define REG_ETMR0_ISR (ETMR0_BA+0x10) /*!< Enhance Timer 0 Interrupt Status Register */
#define REG_ETMR0_DR (ETMR0_BA+0x14) /*!< Enhance Timer 0 Data Register */
#define REG_ETMR0_TCAP (ETMR0_BA+0x18) /*!< Enhance Timer 0 Capture Data Register */
#define REG_ETMR1_CTL (ETMR1_BA+0x00) /*!< Enhance Timer 1 Control Register */
#define REG_ETMR1_PRECNT (ETMR1_BA+0x04) /*!< Enhance Timer 1 Pre-Scale Counter Register */
#define REG_ETMR1_CMPR (ETMR1_BA+0x08) /*!< Enhance Timer 1 Compare Register */
#define REG_ETMR1_IER (ETMR1_BA+0x0C) /*!< Enhance Timer 1 Interrupt Enable Register */
#define REG_ETMR1_ISR (ETMR1_BA+0x10) /*!< Enhance Timer 1 Interrupt Status Register */
#define REG_ETMR1_DR (ETMR1_BA+0x14) /*!< Enhance Timer 1 Data Register */
#define REG_ETMR1_TCAP (ETMR1_BA+0x18) /*!< Enhance Timer 1 Capture Data Register */
#define REG_ETMR2_CTL (ETMR2_BA+0x00) /*!< Enhance Timer 2 Control Register */
#define REG_ETMR2_PRECNT (ETMR2_BA+0x04) /*!< Enhance Timer 2 Pre-Scale Counter Register */
#define REG_ETMR2_CMPR (ETMR2_BA+0x08) /*!< Enhance Timer 2 Compare Register */
#define REG_ETMR2_IER (ETMR2_BA+0x0C) /*!< Enhance Timer 2 Interrupt Enable Register */
#define REG_ETMR2_ISR (ETMR2_BA+0x10) /*!< Enhance Timer 2 Interrupt Status Register */
#define REG_ETMR2_DR (ETMR2_BA+0x14) /*!< Enhance Timer 2 Data Register */
#define REG_ETMR2_TCAP (ETMR2_BA+0x18) /*!< Enhance Timer 2 Capture Data Register */
#define REG_ETMR3_CTL (ETMR3_BA+0x00) /*!< Enhance Timer 3 Control Register */
#define REG_ETMR3_PRECNT (ETMR3_BA+0x04) /*!< Enhance Timer 3 Pre-Scale Counter Register */
#define REG_ETMR3_CMPR (ETMR3_BA+0x08) /*!< Enhance Timer 3 Compare Register */
#define REG_ETMR3_IER (ETMR3_BA+0x0C) /*!< Enhance Timer 3 Interrupt Enable Register */
#define REG_ETMR3_ISR (ETMR3_BA+0x10) /*!< Enhance Timer 3 Interrupt Status Register */
#define REG_ETMR3_DR (ETMR3_BA+0x14) /*!< Enhance Timer 3 Data Register */
#define REG_ETMR3_TCAP (ETMR3_BA+0x18) /*!< Enhance Timer 3 Capture Data Register */
/**@}*/ /* end of ETIMER register group */
/*---------------------- WDT Controller -------------------------*/
/**
@addtogroup WDT Watch Dog Timer Controller(WDT)
Memory Mapped Structure for WDT Controller
@{ */
#define REG_WDT_CTL (WDT_BA+0x00) /*!< WDT Control Register */
#define REG_WDT_ALTCTL (WDT_BA+0x04) /*!< WDT Alternative Control Register */
/**@}*/ /* end of WDT register group */
/*---------------------- WWDT Controller -------------------------*/
/**
@addtogroup WWDT Window Watch Dog Timer Controller(WWDT)
Memory Mapped Structure for WWDT Controller
@{ */
#define REG_WWDT_RLDCNT (WWDT_BA+0x00) /*!< WWDT Reload Counter Register */
#define REG_WWDT_CTL (WWDT_BA+0x04) /*!< WWDT Control Register */
#define REG_WWDT_STATUS (WWDT_BA+0x08) /*!< WWDT Status Register */
#define REG_WWDT_CNT (WWDT_BA+0x0C) /*!< WWDT Counter Value Register */
/**@}*/ /* end of WWDT register group */
/*---------------------- SC Host Interface -------------------------*/
/**
@addtogroup SC Smart Card Host Interface (SC)
Memory Mapped Structure for Smart Card Host Interface
@{ */
#define REG_SC0_DAT (SC0_BA+0x00) /*!< SC0 Receiving/Transmit Holding Buffer Register */
#define REG_SC0_CTL (SC0_BA+0x04) /*!< SC0 Control Register */
#define REG_SC0_ALTCTL (SC0_BA+0x08) /*!< SC0 Alternate Control Register */
#define REG_SC0_EGT (SC0_BA+0x0C) /*!< SC0 Extend Guard Time Register */
#define REG_SC0_RXTOUT (SC0_BA+0x10) /*!< SC0 Receive Buffer Time-out Register */
#define REG_SC0_ETUCTL (SC0_BA+0x14) /*!< SC0 ETU Control Register */
#define REG_SC0_INTEN (SC0_BA+0x18) /*!< SC0 Interrupt Enable Control Register */
#define REG_SC0_INTSTS (SC0_BA+0x1C) /*!< SC0 Interrupt Status Register */
#define REG_SC0_STATUS (SC0_BA+0x20) /*!< SC0 Status Register */
#define REG_SC0_PINCTL (SC0_BA+0x24) /*!< SC0 Pin Control State Register */
#define REG_SC0_TMRCTL0 (SC0_BA+0x28) /*!< SC0 Internal Timer Control Register 0 */
#define REG_SC0_TMRCTL1 (SC0_BA+0x2C) /*!< SC0 Internal Timer Control Register 1 */
#define REG_SC0_TMRCTL2 (SC0_BA+0x30) /*!< SC0 Internal Timer Control Register 2 */
#define REG_SC0_UARTCTL (SC0_BA+0x34) /*!< SC0 UART Mode Control Register */
#define REG_SC0_TMRDAT0 (SC0_BA+0x38) /*!< SC0 Timer Current Data Register 0 */
#define REG_SC0_TMRDAT1 (SC0_BA+0x3C) /*!< SC0 Timer Current Data Register 1 */
#define REG_SC1_DAT (SC1_BA+0x00) /*!< SC1 Receiving/Transmit Holding Buffer Register */
#define REG_SC1_CTL (SC1_BA+0x04) /*!< SC1 Control Register */
#define REG_SC1_ALTCTL (SC1_BA+0x08) /*!< SC1 Alternate Control Register */
#define REG_SC1_EGT (SC1_BA+0x0C) /*!< SC1 Extend Guard Time Register */
#define REG_SC1_RXTOUT (SC1_BA+0x10) /*!< SC1 Receive Buffer Time-out Register */
#define REG_SC1_ETUCTL (SC1_BA+0x14) /*!< SC1 ETU Control Register */
#define REG_SC1_INTEN (SC1_BA+0x18) /*!< SC1 Interrupt Enable Control Register */
#define REG_SC1_INTSTS (SC1_BA+0x1C) /*!< SC1 Interrupt Status Register */
#define REG_SC1_STATUS (SC1_BA+0x20) /*!< SC1 Status Register */
#define REG_SC1_PINCTL (SC1_BA+0x24) /*!< SC1 Pin Control State Register */
#define REG_SC1_TMRCTL0 (SC1_BA+0x28) /*!< SC1 Internal Timer Control Register 0 */
#define REG_SC1_TMRCTL1 (SC1_BA+0x2C) /*!< SC1 Internal Timer Control Register 1 */
#define REG_SC1_TMRCTL2 (SC1_BA+0x30) /*!< SC1 Internal Timer Control Register 2 */
#define REG_SC1_UARTCTL (SC1_BA+0x34) /*!< SC1 UART Mode Control Register */
#define REG_SC1_TMRDAT0 (SC1_BA+0x38) /*!< SC1 Timer Current Data Register 0 */
#define REG_SC1_TMRDAT1 (SC1_BA+0x3C) /*!< SC1 Timer Current Data Register 1 */
/**@}*/ /* end of SC register group */
/*---------------------- Advance Interrupt Controller -------------------------*/
/**
@addtogroup AIC Advance Interrupt Controller(AIC)
Memory Mapped Structure for AIC Controller
@{ */
#define REG_AIC_SCR1 (AIC_BA+0x00) /*!< Source control register 1 */
#define REG_AIC_SCR2 (AIC_BA+0x04) /*!< Source control register 2 */
#define REG_AIC_SCR3 (AIC_BA+0x08) /*!< Source control register 3 */
#define REG_AIC_SCR4 (AIC_BA+0x0C) /*!< Source control register 4 */
#define REG_AIC_SCR5 (AIC_BA+0x10) /*!< Source control register 5 */
#define REG_AIC_SCR6 (AIC_BA+0x14) /*!< Source control register 6 */
#define REG_AIC_SCR7 (AIC_BA+0x18) /*!< Source control register 7 */
#define REG_AIC_SCR8 (AIC_BA+0x1C) /*!< Source control register 8 */
#define REG_AIC_SCR9 (AIC_BA+0x20) /*!< Source control register 9 */
#define REG_AIC_SCR10 (AIC_BA+0x24) /*!< Source control register 10 */
#define REG_AIC_SCR11 (AIC_BA+0x28) /*!< Source control register 11 */
#define REG_AIC_SCR12 (AIC_BA+0x2C) /*!< Source control register 12 */
#define REG_AIC_SCR13 (AIC_BA+0x30) /*!< Source control register 13 */
#define REG_AIC_SCR14 (AIC_BA+0x34) /*!< Source control register 14 */
#define REG_AIC_SCR15 (AIC_BA+0x38) /*!< Source control register 15 */
#define REG_AIC_SCR16 (AIC_BA+0x3C) /*!< Source control register 16 */
#define REG_AIC_IRSR (AIC_BA+0x100) /*!< Interrupt raw status register */
#define REG_AIC_IRSRH (AIC_BA+0x104) /*!< Interrupt raw status register (Hign) */
#define REG_AIC_IASR (AIC_BA+0x108) /*!< Interrupt active status register */
#define REG_AIC_IASRH (AIC_BA+0x10C) /*!< Interrupt active status register (Hign) */
#define REG_AIC_ISR (AIC_BA+0x110) /*!< Interrupt status register */
#define REG_AIC_ISRH (AIC_BA+0x114) /*!< Interrupt status register (High) */
#define REG_AIC_IPER (AIC_BA+0x118) /*!< Interrupt priority encoding register */
#define REG_AIC_ISNR (AIC_BA+0x120) /*!< Interrupt source number register */
#define REG_AIC_OISR (AIC_BA+0x124) /*!< Output interrupt status register */
#define REG_AIC_IMR (AIC_BA+0x128) /*!< Interrupt mask register */
#define REG_AIC_IMRH (AIC_BA+0x12C) /*!< Interrupt mask register (High) */
#define REG_AIC_MECR (AIC_BA+0x130) /*!< Mask enable command register */
#define REG_AIC_MECRH (AIC_BA+0x134) /*!< Mask enable command register (High) */
#define REG_AIC_MDCR (AIC_BA+0x138) /*!< Mask disable command register */
#define REG_AIC_MDCRH (AIC_BA+0x13C) /*!< Mask disable command register (High) */
#define REG_AIC_SSCR (AIC_BA+0x140) /*!< Source Set Command Register */
#define REG_AIC_SSCRH (AIC_BA+0x144) /*!< Source Set Command Register (High) */
#define REG_AIC_SCCR (AIC_BA+0x148) /*!< Source Clear Command Register */
#define REG_AIC_SCCRH (AIC_BA+0x14C) /*!< Source Clear Command Register (High) */
#define REG_AIC_EOSCR (AIC_BA+0x150) /*!< End of service command register */
/**@}*/ /* end of AIC register group */
/*---------------------- General Purpose Input/Output Controller -------------------------*/
/**
@addtogroup GPIO General Purpose Input/Output Controller(GPIO)
Memory Mapped Structure for GPIO Controller
@{ */
#define REG_GPIOA_DIR (GPIO_BA+0x000) /*!< GPIO portA direction control register */
#define REG_GPIOA_DATAOUT (GPIO_BA+0x004) /*!< GPIO portA data output register */
#define REG_GPIOA_DATAIN (GPIO_BA+0x008) /*!< GPIO portA data input register */
#define REG_GPIOA_IMD (GPIO_BA+0x00C) /*!< GPIO Port A Interrupt Mode Register */
#define REG_GPIOA_IREN (GPIO_BA+0x010) /*!< GPIO Port A Interrupt Rising-Edge or Level-High Enable Register */
#define REG_GPIOA_IFEN (GPIO_BA+0x014) /*!< GPIO Port A Interrupt Falling-Edge or Level-Low Enable Register */
#define REG_GPIOA_ISR (GPIO_BA+0x018) /*!< GPIO Port A Interrupt Status Register */
#define REG_GPIOA_DBEN (GPIO_BA+0x01C) /*!< GPIO Port A De-bounce Enable Register */
#define REG_GPIOA_PUEN (GPIO_BA+0x020) /*!< GPIO Port A Pull-Up Enable Register */
#define REG_GPIOA_PDEN (GPIO_BA+0x024) /*!< GPIO Port A Pull-Down Enable Register */
#define REG_GPIOA_ICEN (GPIO_BA+0x028) /*!< GPIO Port A CMOS Input Enable Register */
#define REG_GPIOA_ISEN (GPIO_BA+0x02C) /*!< GPIO Port A Schmitt-Trigger Input Enable Register */
#define REG_GPIOB_DIR (GPIO_BA+0x040) /*!< GPIO port B direction control register */
#define REG_GPIOB_DATAOUT (GPIO_BA+0x044) /*!< GPIO port B data output register */
#define REG_GPIOB_DATAIN (GPIO_BA+0x048) /*!< GPIO port B data input register */
#define REG_GPIOB_IMD (GPIO_BA+0x04C) /*!< GPIO Port B Interrupt Mode Register */
#define REG_GPIOB_IREN (GPIO_BA+0x050) /*!< GPIO Port B Interrupt Rising-Edge or Level-High Enable Register */
#define REG_GPIOB_IFEN (GPIO_BA+0x054) /*!< GPIO Port B Interrupt Falling-Edge or Level-Low Enable Register */
#define REG_GPIOB_ISR (GPIO_BA+0x058) /*!< GPIO Port B Interrupt Status Register */
#define REG_GPIOB_DBEN (GPIO_BA+0x05C) /*!< GPIO Port B De-bounce Enable Register */
#define REG_GPIOB_PUEN (GPIO_BA+0x060) /*!< GPIO Port B Pull-Up Enable Register */
#define REG_GPIOB_PDEN (GPIO_BA+0x064) /*!< GPIO Port B Pull-Down Enable Register */
#define REG_GPIOB_ICEN (GPIO_BA+0x068) /*!< GPIO Port B CMOS Input Enable Register */
#define REG_GPIOB_ISEN (GPIO_BA+0x06C) /*!< GPIO Port B Schmitt-Trigger Input Enable Register */
#define REG_GPIOC_DIR (GPIO_BA+0x080) /*!< GPIO port C direction control register */
#define REG_GPIOC_DATAOUT (GPIO_BA+0x084) /*!< GPIO port C data output register */
#define REG_GPIOC_DATAIN (GPIO_BA+0x088) /*!< GPIO port C data input register */
#define REG_GPIOC_IMD (GPIO_BA+0x08C) /*!< GPIO Port C Interrupt Mode Register */
#define REG_GPIOC_IREN (GPIO_BA+0x090) /*!< GPIO Port C Interrupt Rising-Edge or Level-High Enable Register */
#define REG_GPIOC_IFEN (GPIO_BA+0x094) /*!< GPIO Port C Interrupt Falling-Edge or Level-Low Enable Register */
#define REG_GPIOC_ISR (GPIO_BA+0x098) /*!< GPIO Port C Interrupt Status Register */
#define REG_GPIOC_DBEN (GPIO_BA+0x09C) /*!< GPIO Port C De-bounce Enable Register */
#define REG_GPIOC_PUEN (GPIO_BA+0x0A0) /*!< GPIO Port C Pull-Up Enable Register */
#define REG_GPIOC_PDEN (GPIO_BA+0x0A4) /*!< GPIO Port C Pull-Down Enable Register */
#define REG_GPIOC_ICEN (GPIO_BA+0x0A8) /*!< GPIO Port C CMOS Input Enable Register */
#define REG_GPIOC_ISEN (GPIO_BA+0x0AC) /*!< GPIO Port C Schmitt-Trigger Input Enable Register */
#define REG_GPIOD_DIR (GPIO_BA+0x0C0) /*!< GPIO port D direction control register */
#define REG_GPIOD_DATAOUT (GPIO_BA+0x0C4) /*!< GPIO port D data output register */
#define REG_GPIOD_DATAIN (GPIO_BA+0x0C8) /*!< GPIO port D data input register */
#define REG_GPIOD_IMD (GPIO_BA+0x0CC) /*!< GPIO Port D Interrupt Mode Register */
#define REG_GPIOD_IREN (GPIO_BA+0x0D0) /*!< GPIO Port D Interrupt Rising-Edge or Level-High Enable Register */
#define REG_GPIOD_IFEN (GPIO_BA+0x0D4) /*!< GPIO Port D Interrupt Falling-Edge or Level-Low Enable Register */
#define REG_GPIOD_ISR (GPIO_BA+0x0D8) /*!< GPIO Port D Interrupt Status Register */
#define REG_GPIOD_DBEN (GPIO_BA+0x0DC) /*!< GPIO Port D De-bounce Enable Register */
#define REG_GPIOD_PUEN (GPIO_BA+0x0E0) /*!< GPIO Port D Pull-Up Enable Register */
#define REG_GPIOD_PDEN (GPIO_BA+0x0E4) /*!< GPIO Port D Pull-Down Enable Register */
#define REG_GPIOD_ICEN (GPIO_BA+0x0E8) /*!< GPIO Port D CMOS Input Enable Register */
#define REG_GPIOD_ISEN (GPIO_BA+0x0EC) /*!< GPIO Port D Schmitt-Trigger Input Enable Register */
#define REG_GPIOE_DIR (GPIO_BA+0x100) /*!< GPIO port E direction control register */
#define REG_GPIOE_DATAOUT (GPIO_BA+0x104) /*!< GPIO port E data output register */
#define REG_GPIOE_DATAIN (GPIO_BA+0x108) /*!< GPIO port E data input register */
#define REG_GPIOE_IMD (GPIO_BA+0x10C) /*!< GPIO Port E Interrupt Mode Register */
#define REG_GPIOE_IREN (GPIO_BA+0x110) /*!< GPIO Port E Interrupt Rising-Edge or Level-High Enable Register */
#define REG_GPIOE_IFEN (GPIO_BA+0x114) /*!< GPIO Port E Interrupt Falling-Edge or Level-Low Enable Register */
#define REG_GPIOE_ISR (GPIO_BA+0x118) /*!< GPIO Port E Interrupt Status Register */
#define REG_GPIOE_DBEN (GPIO_BA+0x11C) /*!< GPIO Port E De-bounce Enable Register */
#define REG_GPIOE_PUEN (GPIO_BA+0x120) /*!< GPIO Port E Pull-Up Enable Register */
#define REG_GPIOE_PDEN (GPIO_BA+0x124) /*!< GPIO Port E Pull-Down Enable Register */
#define REG_GPIOE_ICEN (GPIO_BA+0x128) /*!< GPIO Port E CMOS Input Enable Register */
#define REG_GPIOE_ISEN (GPIO_BA+0x12C) /*!< GPIO Port E Schmitt-Trigger Input Enable Register */
#define REG_GPIOF_DIR (GPIO_BA+0x140) /*!< GPIO port F direction control register */
#define REG_GPIOF_DATAOUT (GPIO_BA+0x144) /*!< GPIO port F data output register */
#define REG_GPIOF_DATAIN (GPIO_BA+0x148) /*!< GPIO port F data input register */
#define REG_GPIOF_IMD (GPIO_BA+0x14C) /*!< GPIO Port F Interrupt Mode Register */
#define REG_GPIOF_IREN (GPIO_BA+0x150) /*!< GPIO Port F Interrupt Rising-Edge or Level-High Enable Register */
#define REG_GPIOF_IFEN (GPIO_BA+0x154) /*!< GPIO Port F Interrupt Falling-Edge or Level-Low Enable Register */
#define REG_GPIOF_ISR (GPIO_BA+0x158) /*!< GPIO Port F Interrupt Status Register */
#define REG_GPIOF_DBEN (GPIO_BA+0x15C) /*!< GPIO Port F De-bounce Enable Register */
#define REG_GPIOF_PUEN (GPIO_BA+0x160) /*!< GPIO Port F Pull-Up Enable Register */
#define REG_GPIOF_PDEN (GPIO_BA+0x164) /*!< GPIO Port F Pull-Down Enable Register */
#define REG_GPIOF_ICEN (GPIO_BA+0x168) /*!< GPIO Port F CMOS Input Enable Register */
#define REG_GPIOF_ISEN (GPIO_BA+0x16C) /*!< GPIO Port F Schmitt-Trigger Input Enable Register */
#define REG_GPIOG_DIR (GPIO_BA+0x180) /*!< GPIO port G direction control register */
#define REG_GPIOG_DATAOUT (GPIO_BA+0x184) /*!< GPIO port G data output register */
#define REG_GPIOG_DATAIN (GPIO_BA+0x188) /*!< GPIO port G data input register */
#define REG_GPIOG_IMD (GPIO_BA+0x18C) /*!< GPIO Port G Interrupt Mode Register */
#define REG_GPIOG_IREN (GPIO_BA+0x190) /*!< GPIO Port G Interrupt Rising-Edge or Level-High Enable Register */
#define REG_GPIOG_IFEN (GPIO_BA+0x194) /*!< GPIO Port G Interrupt Falling-Edge or Level-Low Enable Register */
#define REG_GPIOG_ISR (GPIO_BA+0x198) /*!< GPIO Port G Interrupt Status Register */
#define REG_GPIOG_DBEN (GPIO_BA+0x19C) /*!< GPIO Port G De-bounce Enable Register */
#define REG_GPIOG_PUEN (GPIO_BA+0x1A0) /*!< GPIO Port G Pull-Up Enable Register */
#define REG_GPIOG_PDEN (GPIO_BA+0x1A4) /*!< GPIO Port G Pull-Down Enable Register */
#define REG_GPIOG_ICEN (GPIO_BA+0x1A8) /*!< GPIO Port G CMOS Input Enable Register */
#define REG_GPIOG_ISEN (GPIO_BA+0x1AC) /*!< GPIO Port G Schmitt-Trigger Input Enable Register */
#define REG_GPIOH_DIR (GPIO_BA+0x1C0) /*!< GPIO port H direction control register */
#define REG_GPIOH_DATAOUT (GPIO_BA+0x1C4) /*!< GPIO port H data output register */
#define REG_GPIOH_DATAIN (GPIO_BA+0x1C8) /*!< GPIO port H data input register */
#define REG_GPIOH_IMD (GPIO_BA+0x1CC) /*!< GPIO Port H Interrupt Mode Register */
#define REG_GPIOH_IREN (GPIO_BA+0x1D0) /*!< GPIO Port H Interrupt Rising-Edge or Level-High Enable Register */
#define REG_GPIOH_IFEN (GPIO_BA+0x1D4) /*!< GPIO Port H Interrupt Falling-Edge or Level-Low Enable Register */
#define REG_GPIOH_ISR (GPIO_BA+0x1D8) /*!< GPIO Port H Interrupt Status Register */
#define REG_GPIOH_DBEN (GPIO_BA+0x1DC) /*!< GPIO Port H De-bounce Enable Register */
#define REG_GPIOH_PUEN (GPIO_BA+0x1E0) /*!< GPIO Port H Pull-Up Enable Register */
#define REG_GPIOH_PDEN (GPIO_BA+0x1E4) /*!< GPIO Port H Pull-Down Enable Register */
#define REG_GPIOH_ICEN (GPIO_BA+0x1E8) /*!< GPIO Port H CMOS Input Enable Register */
#define REG_GPIOH_ISEN (GPIO_BA+0x1EC) /*!< GPIO Port H Schmitt-Trigger Input Enable Register */
#define REG_GPIOI_DIR (GPIO_BA+0x200) /*!< GPIO port I direction control register */
#define REG_GPIOI_DATAOUT (GPIO_BA+0x204) /*!< GPIO port I data output register */
#define REG_GPIOI_DATAIN (GPIO_BA+0x208) /*!< GPIO port I data input register */
#define REG_GPIOI_IMD (GPIO_BA+0x20C) /*!< GPIO Port I Interrupt Mode Register */
#define REG_GPIOI_IREN (GPIO_BA+0x210) /*!< GPIO Port I Interrupt Rising-Edge or Level-High Enable Register */
#define REG_GPIOI_IFEN (GPIO_BA+0x214) /*!< GPIO Port I Interrupt Falling-Edge or Level-Low Enable Register */
#define REG_GPIOI_ISR (GPIO_BA+0x218) /*!< GPIO Port I Interrupt Status Register */
#define REG_GPIOI_DBEN (GPIO_BA+0x21C) /*!< GPIO Port I De-bounce Enable Register */
#define REG_GPIOI_PUEN (GPIO_BA+0x220) /*!< GPIO Port I Pull-Up Enable Register */
#define REG_GPIOI_PDEN (GPIO_BA+0x224) /*!< GPIO Port I Pull-Down Enable Register */
#define REG_GPIOI_ICEN (GPIO_BA+0x228) /*!< GPIO Port I CMOS Input Enable Register */
#define REG_GPIOI_ISEN (GPIO_BA+0x22C) /*!< GPIO Port I Schmitt-Trigger Input Enable Register */
#define REG_GPIOJ_DIR (GPIO_BA+0x240) /*!< GPIO port J direction control register */
#define REG_GPIOJ_DATAOUT (GPIO_BA+0x244) /*!< GPIO port J data output register */
#define REG_GPIOJ_DATAIN (GPIO_BA+0x248) /*!< GPIO port J data input register */
#define REG_GPIOJ_IMD (GPIO_BA+0x24C) /*!< GPIO Port J Interrupt Mode Register */
#define REG_GPIOJ_IREN (GPIO_BA+0x250) /*!< GPIO Port J Interrupt Rising-Edge or Level-High Enable Register */
#define REG_GPIOJ_IFEN (GPIO_BA+0x254) /*!< GPIO Port J Interrupt Falling-Edge or Level-Low Enable Register */
#define REG_GPIOJ_ISR (GPIO_BA+0x258) /*!< GPIO Port J Interrupt Status Register */
#define REG_GPIOJ_DBEN (GPIO_BA+0x25C) /*!< GPIO Port J De-bounce Enable Register */
#define REG_GPIOJ_PUEN (GPIO_BA+0x260) /*!< GPIO Port J Pull-Up Enable Register */
#define REG_GPIOJ_PDEN (GPIO_BA+0x264) /*!< GPIO Port J Pull-Down Enable Register */
#define REG_GPIOJ_ICEN (GPIO_BA+0x268) /*!< GPIO Port J CMOS Input Enable Register */
#define REG_GPIOJ_ISEN (GPIO_BA+0x26C) /*!< GPIO Port J Schmitt-Trigger Input Enable Register */
#define REG_GPIO_DBNCECON (GPIO_BA+0x3F0) /*!< GPIO Debounce Control Register */
#define REG_GPIO_ISR (GPIO_BA+0x3FC) /*!< GPIO Port Interrupt Status Register */
/**@}*/ /* end of GPIO register group */
/*---------------------- Real Time Clock Controller -------------------------*/
/**
@addtogroup RTC Real Time Clock Controller(RTC)
Memory Mapped Structure for RTC Controller
@{ */
#define REG_RTC_INIT (RTC_BA+0x00) /*!< RTC Initiation Register */
#define REG_RTC_RWEN (RTC_BA+0x04) /*!< RTC Access Enable Register */
#define REG_RTC_FREQADJ (RTC_BA+0x08) /*!< RTC Frequency Compensation Register */
#define REG_RTC_TIME (RTC_BA+0x0C) /*!< Time Loading Register */
#define REG_RTC_CAL (RTC_BA+0x10) /*!< Calendar Loading Register */
#define REG_RTC_TIMEFMT (RTC_BA+0x14) /*!< Time Format Selection Register */
#define REG_RTC_WEEKDAY (RTC_BA+0x18) /*!< Day of the Week Register */
#define REG_RTC_TALM (RTC_BA+0x1C) /*!< Time Alarm Register */
#define REG_RTC_CALM (RTC_BA+0x20) /*!< Calendar Alarm Register */
#define REG_RTC_LEAPYEAR (RTC_BA+0x24) /*!< Leap year Indicator Register */
#define REG_RTC_INTEN (RTC_BA+0x28) /*!< RTC Interrupt Enable Register */
#define REG_RTC_INTSTS (RTC_BA+0x2C) /*!< RTC Interrupt Indicator Register */
#define REG_RTC_TICK (RTC_BA+0x30) /*!< RTC Time Tick Register */
#define REG_RTC_PWRCTL (RTC_BA+0x34) /*!< Power Control Register */
#define REG_RTC_PWRCNT (RTC_BA+0x38) /*!< Power Control Counter Register */
#define REG_RTC_SPR0 (RTC_BA+0x40) /*!< Spare REgistger 0 */
#define REG_RTC_SPR1 (RTC_BA+0x44) /*!< Spare REgistger 1 */
#define REG_RTC_SPR2 (RTC_BA+0x48) /*!< Spare REgistger 2 */
#define REG_RTC_SPR3 (RTC_BA+0x4C) /*!< Spare REgistger 3 */
#define REG_RTC_SPR4 (RTC_BA+0x50) /*!< Spare REgistger 4 */
#define REG_RTC_SPR5 (RTC_BA+0x54) /*!< Spare REgistger 5 */
#define REG_RTC_SPR6 (RTC_BA+0x58) /*!< Spare REgistger 6 */
#define REG_RTC_SPR7 (RTC_BA+0x5C) /*!< Spare REgistger 7 */
#define REG_RTC_SPR8 (RTC_BA+0x60) /*!< Spare REgistger 8 */
#define REG_RTC_SPR9 (RTC_BA+0x64) /*!< Spare REgistger 9 */
#define REG_RTC_SPR10 (RTC_BA+0x68) /*!< Spare REgistger 10 */
#define REG_RTC_SPR11 (RTC_BA+0x6C) /*!< Spare REgistger 11 */
#define REG_RTC_SPR12 (RTC_BA+0x70) /*!< Spare REgistger 12 */
#define REG_RTC_SPR13 (RTC_BA+0x74) /*!< Spare REgistger 13 */
#define REG_RTC_SPR14 (RTC_BA+0x78) /*!< Spare REgistger 14 */
#define REG_RTC_SPR15 (RTC_BA+0x7C) /*!< Spare REgistger 15 */
/**@}*/ /* end of RTC register group */
/*---------------------- Inter-IC Bus Controller -------------------------*/
/**
@addtogroup I2C Inter-IC Bus Controller(I2C)
Memory Mapped Structure for I2C Controller
@{ */
#define REG_I2C0_CSR (I2C0_BA+0x00) /*!< Control and Status Register */
#define REG_I2C0_DIVIDER (I2C0_BA+0x04) /*!< Clock Prescale Register */
#define REG_I2C0_CMDR (I2C0_BA+0x08) /*!< Command Register */
#define REG_I2C0_SWR (I2C0_BA+0x0C) /*!< Software Mode Control Register */
#define REG_I2C0_RXR (I2C0_BA+0x10) /*!< Data Receive Register */
#define REG_I2C0_TXR (I2C0_BA+0x14) /*!< Data Transmit Register */
#define REG_I2C1_CSR (I2C1_BA+0x00) /*!< Control and Status Register */
#define REG_I2C1_DIVIDER (I2C1_BA+0x04) /*!< Clock Prescale Register */
#define REG_I2C1_CMDR (I2C1_BA+0x08) /*!< Command Register */
#define REG_I2C1_SWR (I2C1_BA+0x0C) /*!< Software Mode Control Register */
#define REG_I2C1_RXR (I2C1_BA+0x10) /*!< Data Receive Register */
#define REG_I2C1_TXR (I2C1_BA+0x14) /*!< Data Transmit Register */
/**@}*/ /* end of I2C register group */
/*---------------------- Serial Peripheral Interface Controller -------------------------*/
/**
@addtogroup SPI Serial Peripheral Interface Controller(SPI)
Memory Mapped Structure for SPI Controller
@{ */
#define REG_SPI0_CNTRL (SPI0_BA+0x00) /*!< Control and Status Register */
#define REG_SPI0_DIVIDER (SPI0_BA+0x04) /*!< Clock Divider Register */
#define REG_SPI0_SSR (SPI0_BA+0x08) /*!< Slave Select Register */
#define REG_SPI0_RX0 (SPI0_BA+0x10) /*!< Data Receive Register 0 */
#define REG_SPI0_RX1 (SPI0_BA+0x14) /*!< Data Receive Register 1 */
#define REG_SPI0_RX2 (SPI0_BA+0x18) /*!< Data Receive Register 2 */
#define REG_SPI0_RX3 (SPI0_BA+0x1C) /*!< Data Receive Register 3 */
#define REG_SPI0_TX0 (SPI0_BA+0x10) /*!< Data Transmit Register 0 */
#define REG_SPI0_TX1 (SPI0_BA+0x14) /*!< Data Transmit Register 1 */
#define REG_SPI0_TX2 (SPI0_BA+0x18) /*!< Data Transmit Register 2 */
#define REG_SPI0_TX3 (SPI0_BA+0x1C) /*!< Data Transmit Register 3 */
#define REG_SPI1_CNTRL (SPI1_BA+0x00) /*!< Control and Status Register */
#define REG_SPI1_DIVIDER (SPI1_BA+0x04) /*!< Clock Divider Register */
#define REG_SPI1_SSR (SPI1_BA+0x08) /*!< Slave Select Register */
#define REG_SPI1_RX0 (SPI1_BA+0x10) /*!< Data Receive Register 0 */
#define REG_SPI1_RX1 (SPI1_BA+0x14) /*!< Data Receive Register 1 */
#define REG_SPI1_RX2 (SPI1_BA+0x18) /*!< Data Receive Register 2 */
#define REG_SPI1_RX3 (SPI1_BA+0x1C) /*!< Data Receive Register 3 */
#define REG_SPI1_TX0 (SPI1_BA+0x10) /*!< Data Transmit Register 0 */
#define REG_SPI1_TX1 (SPI1_BA+0x14) /*!< Data Transmit Register 1 */
#define REG_SPI1_TX2 (SPI1_BA+0x18) /*!< Data Transmit Register 2 */
#define REG_SPI1_TX3 (SPI1_BA+0x1C) /*!< Data Transmit Register 3 */
/**@}*/ /* end of SPI register group */
/*---------------------- Pulse Width Modulation Controller -------------------------*/
/**
@addtogroup PWM Pulse Width Modulation Controller(PWM)
Memory Mapped Structure for PWM Controller
@{ */
#define REG_PWM_PPR (PWM_BA+0x00) /*!< PWM Pre-scale Register 0 */
#define REG_PWM_CSR (PWM_BA+0x04) /*!< PWM Clock Select Register */
#define REG_PWM_PCR (PWM_BA+0x08) /*!< PWM Control Register */
#define REG_PWM_CNR0 (PWM_BA+0x0C) /*!< PWM Counter Register 0 */
#define REG_PWM_CMR0 (PWM_BA+0x10) /*!< PWM Comparator Register 0 */
#define REG_PWM_PDR0 (PWM_BA+0x14) /*!< PWM Data Register 0 */
#define REG_PWM_CNR1 (PWM_BA+0x18) /*!< PWM Counter Register 1 */
#define REG_PWM_CMR1 (PWM_BA+0x1C) /*!< PWM Comparator Register 1 */
#define REG_PWM_PDR1 (PWM_BA+0x20) /*!< PWM Data Register 1 */
#define REG_PWM_CNR2 (PWM_BA+0x24) /*!< PWM Counter Register 2 */
#define REG_PWM_CMR2 (PWM_BA+0x28) /*!< PWM Comparator Register 2 */
#define REG_PWM_PDR2 (PWM_BA+0x2C) /*!< PWM Data Register 2 */
#define REG_PWM_CNR3 (PWM_BA+0x30) /*!< PWM Counter Register 3 */
#define REG_PWM_CMR3 (PWM_BA+0x34) /*!< PWM Comparator Register 3 */
#define REG_PWM_PDR3 (PWM_BA+0x38) /*!< PWM Data Register 3 */
#define REG_PWM_PIER (PWM_BA+0x3C) /*!< PWM Timer Interrupt Enable Register */
#define REG_PWM_PIIR (PWM_BA+0x40) /*!< PWM Timer Interrupt Identification Register */
/**@}*/ /* end of PWM register group */
/*---------------------- Analog to Digital Converter -------------------------*/
/**
@addtogroup ADC Analog to Digital Converter(ADC)
Memory Mapped Structure for ADC Controller
@{ */
#define REG_ADC_CTL (ADC_BA+0x000) /*!< ADC Contrl */
#define REG_ADC_CONF (ADC_BA+0x004) /*!< ADC Configure */
#define REG_ADC_IER (ADC_BA+0x008) /*!< ADC Interrupt Enable Register */
#define REG_ADC_ISR (ADC_BA+0x00C) /*!< ADC Interrupt Status Register */
#define REG_ADC_WKISR (ADC_BA+0x010) /*!< ADC Wake Up Interrupt Status Register */
#define REG_ADC_XYDATA (ADC_BA+0x020) /*!< ADC Touch XY Pressure Data */
#define REG_ADC_ZDATA (ADC_BA+0x024) /*!< ADC Touch Z Pressure Data */
#define REG_ADC_DATA (ADC_BA+0x028) /*!< ADC Normal Conversion Data */
#define REG_ADC_VBADATA (ADC_BA+0x02C) /*!< ADC Battery Detection Data */
#define REG_ADC_KPDATA (ADC_BA+0x030) /*!< ADC Key Pad Data */
#define REG_ADC_SELFDATA (ADC_BA+0x034) /*!< ADC Self-Test Data */
#define REG_ADC_XYSORT0 (ADC_BA+0x1F4) /*!< ADC Touch XY Position Mean Value Sort 0 */
#define REG_ADC_XYSORT1 (ADC_BA+0x1F8) /*!< ADC Touch XY Position Mean Value Sort 1 */
#define REG_ADC_XYSORT2 (ADC_BA+0x1FC) /*!< ADC Touch XY Position Mean Value Sort 2 */
#define REG_ADC_XYSORT3 (ADC_BA+0x200) /*!< ADC Touch XY Position Mean Value Sort 3 */
#define REG_ADC_ZSORT0 (ADC_BA+0x204) /*!< ADC Touch Z Pressure Mean Value Sort 0 */
#define REG_ADC_ZSORT1 (ADC_BA+0x208) /*!< ADC Touch Z Pressure Mean Value Sort 1 */
#define REG_ADC_ZSORT2 (ADC_BA+0x20C) /*!< ADC Touch Z Pressure Mean Value Sort 2 */
#define REG_ADC_ZSORT3 (ADC_BA+0x210) /*!< ADC Touch Z Pressure Mean Value Sort 3 */
#define REG_ADC_MTMULCK (ADC_BA+0x220) /*!< ADC Manual Test Mode Unlock */
#define REG_ADC_MTCONF (ADC_BA+0x224) /*!< ADC Manual Test Mode Configure */
#define REG_ADC_MTCON (ADC_BA+0x228) /*!< ADC Manual Test Mode Control */
#define REG_ADC_ADCAII (ADC_BA+0x22C) /*!< ADC Analog Interface Information */
#define REG_ADC_ADCAIIRLT (ADC_BA+0x230) /*!< ADC Analog Interface Information Result */
/**@}*/ /* end of ADC register group */
/*------------------ Capture Sensor Interface Controller ---------------------*/
/**
@addtogroup CAP Capture Sensor Interface Controller(CAP)
Memory Mapped Structure for CAP Controller
@{ */
#define REG_CAP_CTL (CAP_BA+0x000) /*!< Image Capture Interface Control Register */
#define REG_CAP_PAR (CAP_BA+0x004) /*!< Image Capture Interface Parameter Register */
#define REG_CAP_INT (CAP_BA+0x008) /*!< Image Capture Interface Interrupt Registe */
#define REG_CAP_POSTERIZE (CAP_BA+0x00C) /*!< YUV Component Posterizing Factor Register */
#define REG_CAP_MD (CAP_BA+0x010) /*!< Motion Detection Register */
#define REG_CAP_MDADDR (CAP_BA+0x014) /*!< Motion Detection Output Address Register */
#define REG_CAP_MDYADDR (CAP_BA+0x018) /*!< Motion Detection Temp YOutput Address Register */
#define REG_CAP_SEPIA (CAP_BA+0x01C) /*!< Sepia Effect Control Register */
#define REG_CAP_CWSP (CAP_BA+0x020) /*!< Cropping Window Starting Address Register */
#define REG_CAP_CWS (CAP_BA+0x024) /*!< Cropping Window Size Register */
#define REG_CAP_PKTSL (CAP_BA+0x028) /*!< Packet Scaling Vertical/Horizontal Factor Register (LSB) */
#define REG_CAP_PLNSL (CAP_BA+0x02C) /*!< Planar Scaling Vertical/Horizontal Factor Register (LSB) */
#define REG_CAP_FRCTL (CAP_BA+0x030) /*!< Scaling Frame Rate Factor Register */
#define REG_CAP_STRIDE (CAP_BA+0x034) /*!< Frame Output Pixel Stride Register */
#define REG_CAP_FIFOTH (CAP_BA+0x03C) /*!< FIFO threshold Register */
#define REG_CAP_CMPADDR (CAP_BA+0x040) /*!< Compare Packet Memory Base Address Register */
#define REG_CAP_PKTSM (CAP_BA+0x048) /*!< Packet Scaling Vertical/Horizontal Factor Register (MSB) */
#define REG_CAP_PLNSM (CAP_BA+0x04C) /*!< Planar Scaling Vertical/Horizontal Factor Register (MSB) */
#define REG_CAP_CURADDRP (CAP_BA+0x050) /*!< Current Packet System Memory Address Register */
#define REG_CAP_CURADDRY (CAP_BA+0x054) /*!< Current Planar Y System Memory Address Register */
#define REG_CAP_CURADDRU (CAP_BA+0x058) /*!< Current Planar U System Memory Address Register */
#define REG_CAP_CURADDRV (CAP_BA+0x05C) /*!< Current Planar V System Memory Address Register */
#define REG_CAP_PKTBA0 (CAP_BA+0x060) /*!< System Memory Packet Base Address Register */
#define REG_CAP_PKTBA1 (CAP_BA+0x064) /*!< System Memory Packet Base Address Register */
#define REG_CAP_YBA (CAP_BA+0x080) /*!< System Memory Planar Y Base Address Register */
#define REG_CAP_UBA (CAP_BA+0x084) /*!< System Memory Planar U Base Address Register */
#define REG_CAP_VBA (CAP_BA+0x088) /*!< System Memory Planar V Base Address Register */
/**@}*/ /* end of CAP register group */
/*------------------ SDRAM Interface Controller ---------------------*/
/**
@addtogroup SDIC SDRAM Interface Controller(SDIC)
Memory Mapped Structure for SDIC Controller
@{ */
#define REG_SDIC_OPMCTL (SDIC_BA+0x000) /*!< SDRAM Controller Operation Mode Control Register */
#define REG_SDIC_CMD (SDIC_BA+0x004) /*!< SDRAM Command Register */
#define REG_SDIC_REFCTL (SDIC_BA+0x008) /*!< SDRAM Controller Refresh Control Register */
#define REG_SDIC_SIZE0 (SDIC_BA+0x010) /*!< SDRAM 0 Size Register */
#define REG_SDIC_SIZE1 (SDIC_BA+0x014) /*!< SDRAM 1 Size Register */
#define REG_SDIC_MR (SDIC_BA+0x018) /*!< SDRAM Mode Register */
#define REG_SDIC_EMR (SDIC_BA+0x01C) /*!< SDRAM Extended Mode Register */
#define REG_SDIC_EMR2 (SDIC_BA+0x020) /*!< SDRAM Extended Mode Register 2 */
#define REG_SDIC_EMR3 (SDIC_BA+0x024) /*!< SDRAM Extended Mode Register 3 */
#define REG_SDIC_TIME (SDIC_BA+0x028) /*!< SDRAM Timing Control Register */
#define REG_SDIC_DQSODS (SDIC_BA+0x030) /*!< DQS Output Delay Selection Register */
#define REG_SDIC_CKDQSDS (SDIC_BA+0x034) /*!< Clock and DQS Delay Selection Register */
#define REG_SDIC_DAENSEL (SDIC_BA+0x038) /*!< Data Latch Enable Selection Register */
/**@}*/ /* end of SDIC register group */
/*---------------------- Controller Area Network -------------------------*/
/**
@addtogroup CAN Controller Area Network(CAN)
Memory Mapped Structure for CAN Controller
@{ */
#define REG_CAN0_CON (CAN0_BA+0x00) /*!< Control Register */
#define REG_CAN0_STATUS (CAN0_BA+0x04) /*!< Status Register */
#define REG_CAN0_ERR (CAN0_BA+0x08) /*!< Error Counter Register */
#define REG_CAN0_BTIME (CAN0_BA+0x0C) /*!< Bit Time Register */
#define REG_CAN0_IIDR (CAN0_BA+0x10) /*!< Interrupt Identifier Register */
#define REG_CAN0_TEST (CAN0_BA+0x14) /*!< Test Register */
#define REG_CAN0_BRPE (CAN0_BA+0x18) /*!< BRP Extension Register */
#define REG_CAN0_IF1_CREQ (CAN0_BA+0x20) /*!< IF1 Command Request Register */
#define REG_CAN0_IF2_CREQ (CAN0_BA+0x80) /*!< IF2 Command Request Register */
#define REG_CAN0_IF1_CMASK (CAN0_BA+0x24) /*!< IF1 Command Mask Register */
#define REG_CAN0_IF2_CMASK (CAN0_BA+0x84) /*!< IF2 Command Mask Register */
#define REG_CAN0_IF1_MASK1 (CAN0_BA+0x28) /*!< IF1 Msak 1 Register */
#define REG_CNA0_IF2_MASK1 (CAN0_BA+0x88) /*!< IF2 Mask 1 Register */
#define REG_CAN0_IF1_MASK2 (CAN0_BA+0x2C) /*!< IF1 Mask 2 Register */
#define REG_CAN0_IF2_MASK2 (CAN0_BA+0x8C) /*!< IF2 Mask 2 REgister */
#define REG_CAN0_IF1_ARB1 (CAN0_BA+0x30) /*!< IF1 Arbitration 1 Register */
#define REG_CAN0_IF2_ARB1 (CAN0_BA+0x90) /*!< IF2 Arbitration 1 Register */
#define REG_CAN0_IF1_ARB2 (CAN0_BA+0x34) /*!< IF1 Arbitration 2 Register */
#define REG_CAN0_IF2_ARB2 (CAN0_BA+0x94) /*!< IF2 Arbitration 2 Register */
#define REG_CAN0_IF1_MCON (CAN0_BA+0x38) /*!< IF1 Message Control Register */
#define REG_CAN0_IF2_MCON (CAN0_BA+0x98) /*!< IF2 Message Control Register */
#define REG_CAN0_IF1_DAT_A1 (CAN0_BA+0x3C) /*!< IF1 Data A1 Register */
#define REG_CAN0_IF1_DAT_A2 (CAN0_BA+0x40) /*!< IF1 Data A2 Register */
#define REG_CAN0_IF1_DAT_B1 (CAN0_BA+0x44) /*!< IF1 Data B1 Register */
#define REG_CAN0_IF1_DAT_B2 (CAN0_BA+0x48) /*!< IF1 Data B2 Register */
#define REG_CAN0_IF2_DAT_A1 (CAN0_BA+0x9C) /*!< IF2 Data A1 Register */
#define REG_CAN0_IF2_DAT_A2 (CAN0_BA+0xA0) /*!< IF2 Data A2 Register */
#define REG_CAN0_IF2_DAT_B1 (CAN0_BA+0xA4) /*!< IF2 Data B1 Register */
#define REG_CAN0_IF2_DAT_B2 (CAN0_BA+0xA8) /*!< IF2 Data B2 Register */
#define REG_CAN0_TXREQ1 (CAN0_BA+0x100) /*!< Transmission Request Register 1 */
#define REG_CAN0_TXREQ2 (CAN0_BA+0x104) /*!< Transmission Request Register 2 */
#define REG_CAN0_NDAT1 (CAN0_BA+0x120) /*!< New Data Register 1 */
#define REG_CAN0_NDAT2 (CAN0_BA+0x124) /*!< New Data Register 2 */
#define REG_CAN0_IPND1 (CAN0_BA+0x140) /*!< Interrupt Pending Register 1 */
#define REG_CAN0_IPND2 (CAN0_BA+0x142) /*!< Interrupt Pending Register 2 */
#define REG_CAN0_MVLD1 (CAN0_BA+0x160) /*!< Message Valid Register 1 */
#define REG_CAN0_MVLD2 (CAN0_BA+0x164) /*!< Message Valid Register 2 */
#define REG_CAN0_WU_EN (CAN0_BA+0x168) /*!< Wake-up Function Enable */
#define REG_CAN0_WU_STATUS (CAN0_BA+0x16C) /*!< Wake-up Function Status */
#define REG_CAN1_CON (CAN1_BA+0x00) /*!< Control Register */
#define REG_CAN1_STATUS (CAN1_BA+0x04) /*!< Status Register */
#define REG_CAN1_ERR (CAN1_BA+0x08) /*!< Error Counter Register */
#define REG_CAN1_BTIME (CAN1_BA+0x0C) /*!< Bit Time Register */
#define REG_CAN1_IIDR (CAN1_BA+0x10) /*!< Interrupt Identifier Register */
#define REG_CAN1_TEST (CAN1_BA+0x14) /*!< Test Register */
#define REG_CAN1_BRPE (CAN1_BA+0x18) /*!< BRP Extension Register */
#define REG_CAN1_IF1_CREQ (CAN1_BA+0x20) /*!< IF1 Command Request Register */
#define REG_CAN1_IF2_CREQ (CAN1_BA+0x80) /*!< IF2 Command Request Register */
#define REG_CAN1_IF1_CMASK (CAN1_BA+0x24) /*!< IF1 Command Mask Register */
#define REG_CAN1_IF2_CMASK (CAN1_BA+0x84) /*!< IF2 Command Mask Register */
#define REG_CAN1_IF1_MASK1 (CAN1_BA+0x28) /*!< IF1 Msak 1 Register */
#define REG_CNA1_IF2_MASK1 (CAN1_BA+0x88) /*!< IF2 Mask 1 Register */
#define REG_CAN1_IF1_MASK2 (CAN1_BA+0x2C) /*!< IF1 Mask 2 Register */
#define REG_CAN1_IF2_MASK2 (CAN1_BA+0x8C) /*!< IF2 Mask 2 REgister */
#define REG_CAN1_IF1_ARB1 (CAN1_BA+0x30) /*!< IF1 Arbitration 1 Register */
#define REG_CAN1_IF2_ARB1 (CAN1_BA+0x90) /*!< IF2 Arbitration 1 Register */
#define REG_CAN1_IF1_ARB2 (CAN1_BA+0x34) /*!< IF1 Arbitration 2 Register */
#define REG_CAN1_IF2_ARB2 (CAN1_BA+0x94) /*!< IF2 Arbitration 2 Register */
#define REG_CAN1_IF1_MCON (CAN1_BA+0x38) /*!< IF1 Message Control Register */
#define REG_CAN1_IF2_MCON (CAN1_BA+0x98) /*!< IF2 Message Control Register */
#define REG_CAN1_IF1_DAT_A1 (CAN1_BA+0x3C) /*!< IF1 Data A1 Register */
#define REG_CAN1_IF1_DAT_A2 (CAN1_BA+0x40) /*!< IF1 Data A2 Register */
#define REG_CAN1_IF1_DAT_B1 (CAN1_BA+0x44) /*!< IF1 Data B1 Register */
#define REG_CAN1_IF1_DAT_B2 (CAN1_BA+0x48) /*!< IF1 Data B2 Register */
#define REG_CAN1_IF2_DAT_A1 (CAN1_BA+0x9C) /*!< IF2 Data A1 Register */
#define REG_CAN1_IF2_DAT_A2 (CAN1_BA+0xA0) /*!< IF2 Data A2 Register */
#define REG_CAN1_IF2_DAT_B1 (CAN1_BA+0xA4) /*!< IF2 Data B1 Register */
#define REG_CAN1_IF2_DAT_B2 (CAN1_BA+0xA8) /*!< IF2 Data B2 Register */
#define REG_CAN1_TXREQ1 (CAN1_BA+0x100) /*!< Transmission Request Register 1 */
#define REG_CAN1_TXREQ2 (CAN1_BA+0x104) /*!< Transmission Request Register 2 */
#define REG_CAN1_NDAT1 (CAN1_BA+0x120) /*!< New Data Register 1 */
#define REG_CAN1_NDAT2 (CAN1_BA+0x124) /*!< New Data Register 2 */
#define REG_CAN1_IPND1 (CAN1_BA+0x140) /*!< Interrupt Pending Register 1 */
#define REG_CAN1_IPND2 (CAN1_BA+0x142) /*!< Interrupt Pending Register 2 */
#define REG_CAN1_MVLD1 (CAN1_BA+0x160) /*!< Message Valid Register 1 */
#define REG_CAN1_MVLD2 (CAN1_BA+0x164) /*!< Message Valid Register 2 */
#define REG_CAN1_WU_EN (CAN1_BA+0x168) /*!< Wake-up Function Enable */
#define REG_CAN1_WU_STATUS (CAN1_BA+0x16C) /*!< Wake-up Function Status */
/**@}*/ /* end of CAN register group */
/*------------------- Multi-Time Programmable Controller --------------------*/
/**
@addtogroup MTP Multi-Time Programmable Controller (MTP)
Memory Mapped Structure for MTP Controller
@{ */
#define MTP_KEYEN (MTP_BA+0x000) /*!< MTP Key Enable Register */
#define MTP_USERDATA (MTP_BA+0x00C) /*!< MTP User Defined Data Register */
#define MTP_KEY0 (MTP_BA+0x010) /*!< MTP KEY 0 Register */
#define MTP_KEY1 (MTP_BA+0x014) /*!< MTP KEY 1 Register */
#define MTP_KEY2 (MTP_BA+0x018) /*!< MTP KEY 2 Register */
#define MTP_KEY3 (MTP_BA+0x01C) /*!< MTP KEY 3 Register */
#define MTP_KEY4 (MTP_BA+0x020) /*!< MTP KEY 4 Register */
#define MTP_KEY5 (MTP_BA+0x024) /*!< MTP KEY 5 Register */
#define MTP_KEY6 (MTP_BA+0x028) /*!< MTP KEY 6 Register */
#define MTP_KEY7 (MTP_BA+0x02C) /*!< MTP KEY 7 Register */
#define MTP_PCYCLE (MTP_BA+0x030) /*!< MTP Program Cycle Program Count Register */
#define MTP_CTL (MTP_BA+0x034) /*!< MTP Control Register */
#define MTP_PSTART (MTP_BA+0x038) /*!< MTP Program Start Registe */
#define MTP_STATUS (MTP_BA+0x040) /*!< MTP Status Registe */
#define MTP_REGLCTL (MTP_BA+0x050) /*!< MTP Register Write-Protection Control Register*/
/**@}*/ /* end of MTP register group */
/*------------------- JPEG Controller --------------------*/
/**
@addtogroup JPEG JPEG Controller (JPEG)
Memory Mapped Structure for JPEG Controller
@{ */
#define JMCR (JPEG_BA+0x00) /*!< JPEG Mode Control Register */
#define JHEADER (JPEG_BA+0x04) /*!< JPEG Encode Header Control Register */
#define JITCR (JPEG_BA+0x08) /*!< JPEG Image Type Control Register */
#define JPRIQC (JPEG_BA+0x10) /*!< JPEG Primary Q-Table Control Register */
#define JTHBQC (JPEG_BA+0x14) /*!< JPEG Thumbnail Q-Table Control Register */
#define JPRIWH (JPEG_BA+0x18) /*!< JPEG Encode Primary Width/Height Register */
#define JTHBWH (JPEG_BA+0x1C) /*!< JPEG Encode Thumbnail Width/Height Register */
#define JPRST (JPEG_BA+0x20) /*!< JPEG Encode Primary Restart Interval Register */
#define JTRST (JPEG_BA+0x24) /*!< JPEG Encode Thumbnail Restart Interval */
#define JDECWH (JPEG_BA+0x28) /*!< JPEG Decode Image Width/Height Register */
#define JINTCR (JPEG_BA+0x2C) /*!< JPEG Interrupt Control and Status Register */
#define JDOWFBS (JPEG_BA+0x3c) /*!< JPEG Decoding Output Wait Frame Buffer Size */
#define JPEG_BSBAD (JPEG_BA+0x40) /*!< JPEG Test Control Register */
#define JWINDEC0 (JPEG_BA+0x44) /*!< JPEG Window Decode Mode Control Register 0 */
#define JWINDEC1 (JPEG_BA+0x48) /*!< JPEG Window Decode Mode Control Register 1 */
#define JWINDEC2 (JPEG_BA+0x4C) /*!< JPEG Window Decode Mode Control Register 2 */
#define JMACR (JPEG_BA+0x50) /*!< JPEG Memory Address Mode Control Register */
#define JPSCALU (JPEG_BA+0x54) /*!< JPEG Primary Scaling-Up Control Register */
#define JPSCALD (JPEG_BA+0x58) /*!< JPEG Primary Scaling-Down Control Register */
#define JTSCALD (JPEG_BA+0x5C) /*!< JPEG Thumbnail Scaling-Down Control Register */
#define JDBCR (JPEG_BA+0x60) /*!< JPEG Dual-Buffer Control Register */
#define JRESERVE (JPEG_BA+0x70) /*!< JPEG Encode Primary Bit-stream Reserved Size Register */
#define JOFFSET (JPEG_BA+0x74) /*!< JPEG Offset Between Primary & Thumbnail Register */
#define JFSTRIDE (JPEG_BA+0x78) /*!< JPEG Encode Bit-stream Frame Stride Register */
#define JYADDR0 (JPEG_BA+0x7C) /*!< JPEG Y Component Frame Buffer-0 Starting Address Register */
#define JUADDR0 (JPEG_BA+0x80) /*!< JPEG U Component Frame Buffer-0 Starting Address Register */
#define JVADDR0 (JPEG_BA+0x84) /*!< JPEG V Component Frame Buffer-0 Starting Address Register */
#define JYADDR1 (JPEG_BA+0x88) /*!< JPEG Y Component Frame Buffer-1 Starting Address Register */
#define JUADDR1 (JPEG_BA+0x8C) /*!< JPEG U Component Frame Buffer-1 Starting Address Register */
#define JVADDR1 (JPEG_BA+0x90) /*!< JPEG V Component Frame Buffer-1 Starting Address Register */
#define JYSTRIDE (JPEG_BA+0x94) /*!< JPEG Y Component Frame Buffer Stride Register */
#define JUSTRIDE (JPEG_BA+0x98) /*!< JPEG U Component Frame Buffer Stride Register */
#define JVSTRIDE (JPEG_BA+0x9C) /*!< JPEG V Component Frame Buffer Stride Register */
#define JIOADDR0 (JPEG_BA+0xA0) /*!< JPEG Bit-stream Frame Buffer-0 Starting Address Register */
#define JIOADDR1 (JPEG_BA+0xA4) /*!< JPEG Bit-stream Frame Buffer-1 Starting Address Register */
#define JPRI_SIZE (JPEG_BA+0xA8) /*!< JPEG Encode Primary Image Bit-stream Size Register */
#define JTHB_SIZE (JPEG_BA+0xAC) /*!< JPEG Encode Thumbnail Image Bit-stream Size Register */
#define JUPRAT (JPEG_BA+0xB0) /*!< JPEG Encode Up-Scale Ratio Register */
#define JBSFIFO (JPEG_BA+0xB4) /*!< JPEG Bit-stream FIFO Control Register */
#define JSRCH (JPEG_BA+0xB8) /*!< JPEG Encode Source Image Height */
#define JQTAB0 (JPEG_BA+0x100) /*!< JPEG Quantization-Table 0 Register */
#define JQTAB1 (JPEG_BA+0x140) /*!< JPEG Quantization-Table 1 Register */
#define JQTAB2 (JPEG_BA+0x180) /*!< JPEG Quantization-Table 2 Register */
/**@}*/ /* end of JPEG register group */
/*@}*/ /* end of group N9H30_Peripherals */
/** @addtogroup N9H30_IO_ROUTINE N9H30 I/O Routines
The Declaration of N9H30 I/O Routines
@{
*/
typedef volatile unsigned char vu8; ///< Define 8-bit unsigned volatile data type
typedef volatile unsigned short vu16; ///< Define 16-bit unsigned volatile data type
typedef volatile unsigned long vu32; ///< Define 32-bit unsigned volatile data type
/**
* @brief Get a 8-bit unsigned value from specified address
* @param[in] addr Address to get 8-bit data from
* @return 8-bit unsigned value stored in specified address
*/
#define M8(addr) (*((vu8 *) (addr)))
/**
* @brief Get a 16-bit unsigned value from specified address
* @param[in] addr Address to get 16-bit data from
* @return 16-bit unsigned value stored in specified address
* @note The input address must be 16-bit aligned
*/
#define M16(addr) (*((vu16 *) (addr)))
/**
* @brief Get a 32-bit unsigned value from specified address
* @param[in] addr Address to get 32-bit data from
* @return 32-bit unsigned value stored in specified address
* @note The input address must be 32-bit aligned
*/
#define M32(addr) (*((vu32 *) (addr)))
/**
* @brief Set a 32-bit unsigned value to specified I/O port
* @param[in] port Port address to set 32-bit data
* @param[in] value Value to write to I/O port
* @return None
* @note The output port must be 32-bit aligned
*/
#define outpw(port,value) *((volatile unsigned int *)(port)) = value
/**
* @brief Get a 32-bit unsigned value from specified I/O port
* @param[in] port Port address to get 32-bit data from
* @return 32-bit unsigned value stored in specified I/O port
* @note The input port must be 32-bit aligned
*/
#define inpw(port) (*((volatile unsigned int *)(port)))
/**
* @brief Set a 16-bit unsigned value to specified I/O port
* @param[in] port Port address to set 16-bit data
* @param[in] value Value to write to I/O port
* @return None
* @note The output port must be 16-bit aligned
*/
#define outps(port,value) *((volatile unsigned short *)(port)) = value
/**
* @brief Get a 16-bit unsigned value from specified I/O port
* @param[in] port Port address to get 16-bit data from
* @return 16-bit unsigned value stored in specified I/O port
* @note The input port must be 16-bit aligned
*/
#define inps(port) (*((volatile unsigned short *)(port)))
/**
* @brief Set a 8-bit unsigned value to specified I/O port
* @param[in] port Port address to set 8-bit data
* @param[in] value Value to write to I/O port
* @return None
*/
#define outpb(port,value) *((volatile unsigned char *)(port)) = value
/**
* @brief Get a 8-bit unsigned value from specified I/O port
* @param[in] port Port address to get 8-bit data from
* @return 8-bit unsigned value stored in specified I/O port
*/
#define inpb(port) (*((volatile unsigned char *)(port)))
/**
* @brief Set a 32-bit unsigned value to specified I/O port
* @param[in] port Port address to set 32-bit data
* @param[in] value Value to write to I/O port
* @return None
* @note The output port must be 32-bit aligned
*/
#define outp32(port,value) *((volatile unsigned int *)(port)) = value
/**
* @brief Get a 32-bit unsigned value from specified I/O port
* @param[in] port Port address to get 32-bit data from
* @return 32-bit unsigned value stored in specified I/O port
* @note The input port must be 32-bit aligned
*/
#define inp32(port) (*((volatile unsigned int *)(port)))
/**
* @brief Set a 16-bit unsigned value to specified I/O port
* @param[in] port Port address to set 16-bit data
* @param[in] value Value to write to I/O port
* @return None
* @note The output port must be 16-bit aligned
*/
#define outp16(port,value) *((volatile unsigned short *)(port)) = value
/**
* @brief Get a 16-bit unsigned value from specified I/O port
* @param[in] port Port address to get 16-bit data from
* @return 16-bit unsigned value stored in specified I/O port
* @note The input port must be 16-bit aligned
*/
#define inp16(port) (*((volatile unsigned short *)(port)))
/**
* @brief Set a 8-bit unsigned value to specified I/O port
* @param[in] port Port address to set 8-bit data
* @param[in] value Value to write to I/O port
* @return None
*/
#define outp8(port,value) *((volatile unsigned char *)(port)) = value
/**
* @brief Get a 8-bit unsigned value from specified I/O port
* @param[in] port Port address to get 8-bit data from
* @return 8-bit unsigned value stored in specified I/O port
*/
#define inp8(port) (*((volatile unsigned char *)(port)))
/*@}*/ /* end of group N9H30_IO_ROUTINE */
/******************************************************************************/
/* Legacy Constants */
/******************************************************************************/
/** @addtogroup N9H30_legacy_Constants N9H30 Legacy Constants
N9H30 Legacy Constants
@{
*/
typedef void *PVOID; ///< Define void pointer data type
typedef void VOID; ///< Define void data type
typedef char BOOL; ///< Define bool data type
typedef char *PBOOL; ///< Define bool pointer data type
typedef char INT8; ///< Define 8-bit singed data type
typedef char CHAR; ///< Define char data type
typedef char *PINT8; ///< Define 8-bit singed pointer data type
typedef char *PCHAR; ///< Define char pointer data type
typedef unsigned char UINT8; ///< Define 8-bit unsigned data type
typedef unsigned char UCHAR; ///< Define char unsigned data type
typedef unsigned char *PUINT8; ///< Define 8-bit unsigned pointer data type
typedef unsigned char *PUCHAR; ///< Define char unsigned pointer data type
typedef char *PSTR; ///< Define string pointer data type
typedef const char *PCSTR; ///< Define constant string pointer data type
typedef short SHORT; ///< Define short signed data type
typedef short *PSHORT; ///< Define short signed pointer data type
typedef unsigned short USHORT; ///< Define short unsigned data type
typedef unsigned short *PUSHORT; ///< Define short unsigned pointer data type
typedef short INT16; ///< Define 16-bit signed data type
typedef short *PINT16; ///< Define 16-bit signed pointer data type
typedef unsigned short UINT16; ///< Define 16-bit unsigned data type
typedef unsigned short *PUINT16; ///< Define 16-bit unsigned pointer data type
typedef int INT; ///< Define integer signed data type
typedef int *PINT; ///< Define integer signed pointer data type
typedef unsigned int UINT; ///< Define integer unsigned data type
typedef unsigned int *PUINT; ///< Define integer unsigned pointer data type
typedef int INT32; ///< Define 32-bit signed data type
typedef int *PINT32; ///< Define 32-bit signed pointer data type
typedef unsigned int UINT32; ///< Define 32-bit unsigned data type
typedef unsigned int *PUINT32; ///< Define 32-bit unsigned pointer data type
#if defined ( __GNUC__ ) && !(__CC_ARM)
typedef long long INT64;
typedef unsigned long long UINT64;
#else
typedef __int64 INT64; ///< Define 64-bit signed data type
typedef unsigned __int64 UINT64; ///< Define 64-bit unsigned data type
#endif
typedef float FLOAT; ///< Define float data type
typedef float *PFLOAT; ///< Define float pointer data type
typedef double DOUBLE; ///< Define double data type
typedef double *PDOUBLE; ///< Define double pointer data type
typedef int SIZE_T; ///< Define size of data type
typedef unsigned char REG8; ///< Define 8-bit register data type
typedef unsigned short REG16; ///< Define 16-bit register data type
typedef unsigned int REG32; ///< Define 32-bit register data type
#ifndef NULL
#define NULL (0) ///< NULL pointer
#endif
#define TRUE (1) ///< Boolean true, define to use in API parameters or return value
#define FALSE (0) ///< Boolean false, define to use in API parameters or return value
#define ENABLE (1) ///< Enable, define to use in API parameters
#define DISABLE (0) ///< Disable, define to use in API parameters
#define Successful 0 ///< Function return value success
#define Fail 1 ///< Function return value failed
/* Define one bit mask */
#define BIT0 (0x00000001) ///< Bit 0 mask of an 32 bit integer
#define BIT1 (0x00000002) ///< Bit 1 mask of an 32 bit integer
#define BIT2 (0x00000004) ///< Bit 2 mask of an 32 bit integer
#define BIT3 (0x00000008) ///< Bit 3 mask of an 32 bit integer
#define BIT4 (0x00000010) ///< Bit 4 mask of an 32 bit integer
#define BIT5 (0x00000020) ///< Bit 5 mask of an 32 bit integer
#define BIT6 (0x00000040) ///< Bit 6 mask of an 32 bit integer
#define BIT7 (0x00000080) ///< Bit 7 mask of an 32 bit integer
#define BIT8 (0x00000100) ///< Bit 8 mask of an 32 bit integer
#define BIT9 (0x00000200) ///< Bit 9 mask of an 32 bit integer
#define BIT10 (0x00000400) ///< Bit 10 mask of an 32 bit integer
#define BIT11 (0x00000800) ///< Bit 11 mask of an 32 bit integer
#define BIT12 (0x00001000) ///< Bit 12 mask of an 32 bit integer
#define BIT13 (0x00002000) ///< Bit 13 mask of an 32 bit integer
#define BIT14 (0x00004000) ///< Bit 14 mask of an 32 bit integer
#define BIT15 (0x00008000) ///< Bit 15 mask of an 32 bit integer
#define BIT16 (0x00010000) ///< Bit 16 mask of an 32 bit integer
#define BIT17 (0x00020000) ///< Bit 17 mask of an 32 bit integer
#define BIT18 (0x00040000) ///< Bit 18 mask of an 32 bit integer
#define BIT19 (0x00080000) ///< Bit 19 mask of an 32 bit integer
#define BIT20 (0x00100000) ///< Bit 20 mask of an 32 bit integer
#define BIT21 (0x00200000) ///< Bit 21 mask of an 32 bit integer
#define BIT22 (0x00400000) ///< Bit 22 mask of an 32 bit integer
#define BIT23 (0x00800000) ///< Bit 23 mask of an 32 bit integer
#define BIT24 (0x01000000) ///< Bit 24 mask of an 32 bit integer
#define BIT25 (0x02000000) ///< Bit 25 mask of an 32 bit integer
#define BIT26 (0x04000000) ///< Bit 26 mask of an 32 bit integer
#define BIT27 (0x08000000) ///< Bit 27 mask of an 32 bit integer
#define BIT28 (0x10000000) ///< Bit 28 mask of an 32 bit integer
#define BIT29 (0x20000000) ///< Bit 29 mask of an 32 bit integer
#define BIT30 (0x40000000) ///< Bit 30 mask of an 32 bit integer
#define BIT31 (0x80000000) ///< Bit 31 mask of an 32 bit integer
/* Byte Mask Definitions */
#define BYTE0_Msk (0x000000FF) ///< Mask to get bit0~bit7 from a 32 bit integer
#define BYTE1_Msk (0x0000FF00) ///< Mask to get bit8~bit15 from a 32 bit integer
#define BYTE2_Msk (0x00FF0000) ///< Mask to get bit16~bit23 from a 32 bit integer
#define BYTE3_Msk (0xFF000000) ///< Mask to get bit24~bit31 from a 32 bit integer
#define GET_BYTE0(u32Param) ((u32Param & BYTE0_Msk) ) /*!< Extract Byte 0 (Bit 0~ 7) from parameter u32Param */
#define GET_BYTE1(u32Param) ((u32Param & BYTE1_Msk) >> 8) /*!< Extract Byte 1 (Bit 8~15) from parameter u32Param */
#define GET_BYTE2(u32Param) ((u32Param & BYTE2_Msk) >> 16) /*!< Extract Byte 2 (Bit 16~23) from parameter u32Param */
#define GET_BYTE3(u32Param) ((u32Param & BYTE3_Msk) >> 24) /*!< Extract Byte 3 (Bit 24~31) from parameter u32Param */
#ifdef __cplusplus
#define __I volatile /*!< Defines 'read only' permissions */
#else
#define __I volatile const /*!< Defines 'read only' permissions */
#endif
#define __O volatile /*!< Defines 'write only' permissions */
#define __IO volatile /*!< Defines 'read / write' permissions */
extern void __nop(void);
#endif /* __N9H30_H__ */
/*@}*/ /* end of group N9H30_legacy_Constants */
View Git Blame Copy Permalink