82 lines
2.6 KiB
Plaintext
82 lines
2.6 KiB
Plaintext
//*****************************************************************************
|
|
//
|
|
// blinky.icf - Linker configuration file for blinky.
|
|
//
|
|
// Copyright (c) 2013-2014 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
// laws. You may not combine this software with "viral" open-source
|
|
// software in order to form a larger program.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 2.1.0.12573 of the DK-TM4C129X Firmware Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//
|
|
// Define a memory region that covers the entire 4 GB addressible space of the
|
|
// processor.
|
|
//
|
|
define memory mem with size = 4G;
|
|
|
|
//
|
|
// Define a region for the on-chip flash.
|
|
//
|
|
define region FLASH = mem:[from 0x20000000 to 0x207FFFFF];
|
|
|
|
//
|
|
// Define a region for the on-chip SRAM.
|
|
//
|
|
define region SRAM = mem:[from 0x20800000 to 0x23FFFFFF];
|
|
|
|
//
|
|
// Define a block for the heap. The size should be set to something other
|
|
// than zero if things in the C library that require the heap are used.
|
|
//
|
|
define block HEAP with alignment = 8, size = 0x02000000 { };
|
|
|
|
//
|
|
// Indicate that the read/write values should be initialized by copying from
|
|
// flash.
|
|
//
|
|
initialize by copy { readwrite };
|
|
|
|
//
|
|
// Indicate that the noinit values should be left alone. This includes the
|
|
// stack, which if initialized will destroy the return address from the
|
|
// initialization code, causing the processor to branch to zero and fault.
|
|
//
|
|
do not initialize { section .noinit };
|
|
|
|
//
|
|
// Place the interrupt vectors at the start of flash.
|
|
//
|
|
place at start of FLASH { readonly section .intvec };
|
|
|
|
//
|
|
// Place the remainder of the read-only items into flash.
|
|
//
|
|
place in FLASH { readonly };
|
|
|
|
//
|
|
// Place the RAM vector table at the start of SRAM.
|
|
//
|
|
place at start of SRAM { section VTABLE };
|
|
|
|
//
|
|
// Place all read/write items into SRAM.
|
|
//
|
|
place in SRAM { readwrite, block HEAP };
|
|
keep { section FSymTab };
|
|
keep { section VSymTab };
|
|
keep { section .rti_fn* };
|