258 lines
8.7 KiB
C
258 lines
8.7 KiB
C
/**
|
|
* @file hal_sdhost.c
|
|
* @author ALLWINNERTECH IOT WLAN Team
|
|
*/
|
|
|
|
/*
|
|
* Copyright (C) 2017 ALLWINNERTECH TECHNOLOGY CO., LTD. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name of ALLWINNERTECH TECHNOLOGY CO., LTD. nor the names of
|
|
* its contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, )|hhst->sdio_irq_maskPROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <hal_gpio.h>
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#ifndef CONFIG_KERNEL_FREERTOS
|
|
#include <log.h>
|
|
#endif
|
|
#include "_sdhost.h"
|
|
#include "_sd_define.h"
|
|
|
|
#ifndef SDC_MAX_PIN_NUM
|
|
#define SDC_MAX_PIN_NUM 13
|
|
#endif
|
|
|
|
typedef struct
|
|
{
|
|
uint32_t *pin;
|
|
uint8_t pin_num : 3;
|
|
uint8_t pin_mux : 3;
|
|
uint8_t pin_drv : 2;
|
|
} sdmmc_pin_t;
|
|
|
|
static sdmmc_pin_t sunxi_sdmmc_pin[4];
|
|
|
|
|
|
int32_t sdmmc_pinctl_set_from_cfg(struct mmc_host *host, char *sdc_str, uint32_t pin_num)
|
|
{
|
|
#ifdef HAL_SetPin
|
|
int32_t ret = 0;
|
|
user_gpio_set_t gpiocfg[SDC_MAX_PIN_NUM] = {0};
|
|
int i = 0;
|
|
int gpio_num = 0;
|
|
if (pin_num > SDC_MAX_PIN_NUM) {
|
|
SDC_LOGE("pin num over %d\n", SDC_MAX_PIN_NUM);
|
|
return ret;
|
|
}
|
|
|
|
ret = Hal_Cfg_GetGPIOSecData(sdc_str, gpiocfg, pin_num);
|
|
if(ret < 0) {
|
|
SDC_LOGE("%s not has pin setting on sys_config.fex\n", sdc_str);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0;i < pin_num; i++) {
|
|
SDC_LOGD("name %s,port %d,port_num %d,mul_sel %d, pull %d, drv_level %d\n",\
|
|
gpiocfg[i].gpio_name, gpiocfg[i].port, gpiocfg[i].port_num, \
|
|
gpiocfg[i].mul_sel, gpiocfg[i].pull, gpiocfg[i].drv_level);
|
|
}
|
|
|
|
for(i = 0; i< pin_num; i++ ) {
|
|
gpio_num = (gpiocfg[i].port - 1) * PINS_PER_BANK + gpiocfg[i].port_num;
|
|
ret = hal_gpio_pinmux_set_function(gpio_num, gpiocfg[i].mul_sel);
|
|
if (ret) {
|
|
SDC_LOGE(
|
|
"[sdmmc %s] PIN%lu set function failed! return %d\n",
|
|
sdc_str, gpio_num, ret);
|
|
return -1;
|
|
}
|
|
|
|
ret = hal_gpio_set_driving_level(gpio_num, gpiocfg[i].drv_level);
|
|
if (ret) {
|
|
SDC_LOGE(
|
|
"[sdmmc %s] PIN%lu set driving level failed! return %d\n",
|
|
sdc_str, gpio_num, ret);
|
|
return -1;
|
|
}
|
|
ret = hal_gpio_set_pull(gpio_num, gpiocfg[i].pull);
|
|
if (ret) {
|
|
SDC_LOGE(
|
|
"[sdmmc %s] PIN%lu set driving level failed! return %d\n",
|
|
sdc_str, gpio_num, ret);
|
|
return -1;
|
|
}
|
|
}
|
|
return ret;
|
|
#else
|
|
SDC_LOGN("unsupport sys fex %d\n");
|
|
return -1;
|
|
#endif
|
|
}
|
|
|
|
|
|
uint32_t sdmmc_pinctrl_init(struct mmc_host *host)
|
|
{
|
|
uint8_t i;
|
|
uint32_t flags = 0;
|
|
int ret;
|
|
uint32_t host_id = host->sdc_id;
|
|
|
|
switch (host_id) {
|
|
case 0:
|
|
ret = sdmmc_pinctl_set_from_cfg(host, "sdc0", SDC0_NUM);
|
|
if(ret < 0) {
|
|
sunxi_sdmmc_pin[host_id].pin_num = SDC0_NUM;
|
|
sunxi_sdmmc_pin[host_id].pin_mux = SDMMC_MUXSEL;
|
|
sunxi_sdmmc_pin[host_id].pin_drv = SDMMC_DRVSEL;
|
|
sunxi_sdmmc_pin[host_id].pin = malloc(sizeof(uint32_t) * SDC0_NUM);
|
|
sunxi_sdmmc_pin[host_id].pin[0] = SDC0_CLK;
|
|
sunxi_sdmmc_pin[host_id].pin[1] = SDC0_CMD;
|
|
sunxi_sdmmc_pin[host_id].pin[2] = SDC0_D0;
|
|
sunxi_sdmmc_pin[host_id].pin[3] = SDC0_D1;
|
|
sunxi_sdmmc_pin[host_id].pin[4] = SDC0_D2;
|
|
sunxi_sdmmc_pin[host_id].pin[5] = SDC0_D3;
|
|
SDC_LOGE("sdmmc%ld use default pin setting\n", host_id);
|
|
} else {
|
|
SDC_LOGD("sdmmc%ld use pin setting on sys_config.fex\n", host_id);
|
|
goto out;
|
|
}
|
|
break;
|
|
case 1:
|
|
if (host->param.pwr_mode == POWER_MODE_330) {
|
|
hal_gpio_sel_vol_mode(SDC1_D0, POWER_MODE_330);
|
|
} else {
|
|
hal_gpio_sel_vol_mode(SDC1_D0, POWER_MODE_180);
|
|
}
|
|
ret = sdmmc_pinctl_set_from_cfg(host, "sdc1", SDC1_NUM);
|
|
if(ret < 0) {
|
|
sunxi_sdmmc_pin[host_id].pin_num = SDC1_NUM;
|
|
sunxi_sdmmc_pin[host_id].pin_mux = SDMMC_MUXSEL;
|
|
sunxi_sdmmc_pin[host_id].pin_drv = SDMMC_DRVSEL;
|
|
sunxi_sdmmc_pin[host_id].pin = malloc(sizeof(uint32_t) * SDC1_NUM);
|
|
sunxi_sdmmc_pin[host_id].pin[0] = SDC1_CLK;
|
|
sunxi_sdmmc_pin[host_id].pin[1] = SDC1_CMD;
|
|
sunxi_sdmmc_pin[host_id].pin[2] = SDC1_D0;
|
|
// sunxi_sdmmc_pin[host_id].pin[3] = SDC1_D1;
|
|
// sunxi_sdmmc_pin[host_id].pin[4] = SDC1_D2;
|
|
// sunxi_sdmmc_pin[host_id].pin[5] = SDC1_D3;
|
|
SDC_LOGE("sdmmc%ld use default pin setting\n", host_id);
|
|
} else {
|
|
SDC_LOGD("sdmmc%ld use pin setting on sys_config.fex\n", host_id);
|
|
goto out;
|
|
}
|
|
break;
|
|
default:
|
|
SDC_LOGE("sdmmc%ld is invalid\n", host_id);
|
|
return -1;
|
|
|
|
}
|
|
|
|
for (i = 0; i < sunxi_sdmmc_pin[host_id].pin_num; i++)
|
|
{
|
|
ret = hal_gpio_pinmux_set_function(sunxi_sdmmc_pin[host_id].pin[i], sunxi_sdmmc_pin[host_id].pin_mux);
|
|
if (ret)
|
|
{
|
|
SDC_LOGE(
|
|
"[sdmmc%ld] PIN%lu set function failed! return %d\n",
|
|
host_id, sunxi_sdmmc_pin[host_id].pin[i], ret);
|
|
return -1;
|
|
}
|
|
ret = hal_gpio_set_driving_level(sunxi_sdmmc_pin[host_id].pin[i], sunxi_sdmmc_pin[host_id].pin_drv);
|
|
if (ret)
|
|
{
|
|
SDC_LOGE(
|
|
"[sdmmc%ld] PIN%lu set driving level failed! return %d\n",
|
|
host_id, sunxi_sdmmc_pin[host_id].pin[i], ret);
|
|
return -1;
|
|
}
|
|
ret = hal_gpio_set_pull(sunxi_sdmmc_pin[host_id].pin[i], GPIO_PULL_UP);
|
|
// ret = drv_gpio_set_pull_state(sunxi_sdmmc_pin[host_id].pin[i], DRV_GPIO_PULL_DOWN_DISABLE);
|
|
}
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
int mmc_gpiod_request_cd_irq(struct mmc_host *host)
|
|
{
|
|
uint32_t irq;
|
|
int ret = 0;
|
|
gpio_pull_status_t pull_state;
|
|
gpio_direction_t gpio_direction;
|
|
gpio_data_t gpio_data;
|
|
|
|
host->cd_gpio_pin = SDC0_DET;
|
|
/*set gpio detect-clk 24M*/
|
|
hal_gpio_set_debounce(host->cd_gpio_pin, 1);
|
|
ret = hal_gpio_to_irq(host->cd_gpio_pin, &irq);
|
|
if (ret < 0)
|
|
{
|
|
SDC_LOGE("gpio to irq error, error num: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*set pin mux*/
|
|
ret = hal_gpio_pinmux_set_function(host->cd_gpio_pin, 0);
|
|
ret = hal_gpio_set_driving_level(host->cd_gpio_pin, 3);
|
|
ret = hal_gpio_set_pull(host->cd_gpio_pin, 1);
|
|
if (ret < 0)
|
|
{
|
|
SDC_LOGE("set pin mux error!\n");
|
|
return -1;
|
|
}
|
|
|
|
host->cd_irq = irq;
|
|
ret = hal_gpio_irq_request(irq, host->cd_gpio_isr, IRQ_TYPE_EDGE_BOTH, host);
|
|
if (ret < 0)
|
|
{
|
|
SDC_LOGE("request irq error, irq num:%lu error num: %d\n", (unsigned long)irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
#if 0
|
|
ret = drv_gpio_irq_enable(irq);
|
|
if (ret < 0)
|
|
{
|
|
printf("request irq error, error num: %d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = drv_gpio_irq_disable(irq);
|
|
if (ret < 0)
|
|
{
|
|
printf("disable irq error, irq num:%lu,error num: %d\n", irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = drv_gpio_irq_free(irq);
|
|
if (ret < 0)
|
|
{
|
|
printf("free irq error, error num: %d\n", ret);
|
|
return ret;
|
|
}
|
|
#endif
|
|
return ret;
|
|
}
|
|
|