445 lines
11 KiB
C
445 lines
11 KiB
C
/*
|
|
* Copyright (C) 2018 Shanghai Eastsoft Microelectronics Co., Ltd.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2019-07-12 wangyq the first version
|
|
*/
|
|
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
#include <rtdevice.h>
|
|
#include "board.h"
|
|
#include "drv_uart.h"
|
|
#include <lib_gpio.h>
|
|
#include <lib_uart.h>
|
|
|
|
#ifdef RT_USING_SERIAL
|
|
|
|
/* es8p uart driver */
|
|
struct es8p_uart
|
|
{
|
|
UART_TypeDef *huart;
|
|
IRQn_Type irq;
|
|
};
|
|
|
|
static rt_err_t es8px_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
GPIO_InitStruType gpio_initstruct;
|
|
UART_InitStruType uart_initstruct;
|
|
struct es8p_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
uart = (struct es8p_uart *)serial->parent.user_data;
|
|
|
|
gpio_initstruct.GPIO_Signal = GPIO_Pin_Signal_Digital;
|
|
gpio_initstruct.GPIO_OD = GPIO_ODE_Output_Disable;
|
|
gpio_initstruct.GPIO_PUEN = GPIO_PUE_Input_Enable;
|
|
gpio_initstruct.GPIO_PDEN = GPIO_PDE_Input_Disable;
|
|
gpio_initstruct.GPIO_DS = GPIO_DS_Output_Normal;
|
|
|
|
#ifdef BSP_USING_UART0
|
|
gpio_initstruct.GPIO_Func = GPIO_Func_2;
|
|
/* Initialize rx pin */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_In;
|
|
GPIO_Init(GPIOB, GPIO_Pin_0, &gpio_initstruct);
|
|
/* Initialize tx pin ,the same as rx pin except mode */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_Out;
|
|
GPIO_Init(GPIOB, GPIO_Pin_1, &gpio_initstruct);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART1
|
|
gpio_initstruct.GPIO_Func = GPIO_Func_1;
|
|
/* Initialize rx pin */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_In;
|
|
GPIO_Init(GPIOA, GPIO_Pin_18, &gpio_initstruct);
|
|
/* Initialize tx pin ,the same as rx pin except mode */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_Out;
|
|
GPIO_Init(GPIOA, GPIO_Pin_17, &gpio_initstruct);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
gpio_initstruct.GPIO_Func = GPIO_Func_2;
|
|
/* Initialize rx pin */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_In;
|
|
GPIO_Init(GPIOA, GPIO_Pin_4, &gpio_initstruct);
|
|
/* Initialize tx pin ,the same as rx pin except mode */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_Out;
|
|
GPIO_Init(GPIOA, GPIO_Pin_5, &gpio_initstruct);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART3
|
|
gpio_initstruct.GPIO_Func = GPIO_Func_2;
|
|
/* Initialize rx pin */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_In;
|
|
GPIO_Init(GPIOA, GPIO_Pin_30, &gpio_initstruct);
|
|
/* Initialize tx pin ,the same as rx pin except mode */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_Out;
|
|
GPIO_Init(GPIOA, GPIO_Pin_29, &gpio_initstruct);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART4
|
|
gpio_initstruct.GPIO_Func = GPIO_Func_1;
|
|
/* Initialize rx pin */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_In;
|
|
GPIO_Init(GPIOB, GPIO_Pin_10, &gpio_initstruct);
|
|
/* Initialize tx pin ,the same as rx pin except mode */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_Out;
|
|
GPIO_Init(GPIOB, GPIO_Pin_11, &gpio_initstruct);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART5
|
|
gpio_initstruct.GPIO_Func = GPIO_Func_1;
|
|
/* Initialize rx pin */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_In;
|
|
GPIO_Init(GPIOB, GPIO_Pin_12, &gpio_initstruct);
|
|
/* Initialize tx pin ,the same as rx pin except mode */
|
|
gpio_initstruct.GPIO_Direction = GPIO_Dir_Out;
|
|
GPIO_Init(GPIOB, GPIO_Pin_13, &gpio_initstruct);
|
|
#endif
|
|
|
|
uart_initstruct.UART_ClockSet = UART_Clock_1;
|
|
uart_initstruct.UART_BaudRate = cfg->baud_rate;
|
|
uart_initstruct.UART_RxPolar = UART_Polar_Normal;
|
|
uart_initstruct.UART_TxPolar = UART_Polar_Normal;
|
|
|
|
if (cfg->data_bits == DATA_BITS_7)
|
|
{
|
|
uart_initstruct.UART_RxMode = UART_DataMode_7;
|
|
uart_initstruct.UART_TxMode = UART_DataMode_7;
|
|
|
|
if (cfg->parity == PARITY_EVEN)
|
|
{
|
|
uart_initstruct.UART_RxMode = UART_DataMode_7Even;
|
|
uart_initstruct.UART_TxMode = UART_DataMode_7Even;
|
|
}
|
|
else if (cfg->parity == PARITY_ODD)
|
|
{
|
|
uart_initstruct.UART_RxMode = UART_DataMode_7Odd;
|
|
uart_initstruct.UART_TxMode = UART_DataMode_7Odd;
|
|
}
|
|
}
|
|
else if (cfg->data_bits == DATA_BITS_8)
|
|
{
|
|
uart_initstruct.UART_RxMode = UART_DataMode_8;
|
|
uart_initstruct.UART_TxMode = UART_DataMode_8;
|
|
|
|
if (cfg->parity == PARITY_EVEN)
|
|
{
|
|
uart_initstruct.UART_RxMode = UART_DataMode_8Even;
|
|
uart_initstruct.UART_TxMode = UART_DataMode_8Even;
|
|
}
|
|
else if (cfg->parity == PARITY_ODD)
|
|
{
|
|
uart_initstruct.UART_RxMode = UART_DataMode_8Odd;
|
|
uart_initstruct.UART_TxMode = UART_DataMode_8Odd;
|
|
}
|
|
}
|
|
else if (cfg->data_bits == DATA_BITS_9)
|
|
{
|
|
uart_initstruct.UART_RxMode = UART_DataMode_9;
|
|
uart_initstruct.UART_TxMode = UART_DataMode_9;
|
|
}
|
|
|
|
if (cfg->bit_order == BIT_ORDER_MSB)
|
|
{
|
|
return RT_EINVAL;
|
|
}
|
|
|
|
if (cfg->invert == NRZ_INVERTED)
|
|
{
|
|
uart_initstruct.UART_RxPolar = UART_Polar_Opposite;
|
|
uart_initstruct.UART_TxPolar = UART_Polar_Opposite;
|
|
}
|
|
|
|
/* config uart function */
|
|
UART_Init(uart->huart, &uart_initstruct);
|
|
/* enable rx and tx */
|
|
uart->huart->CON.RXEN = 1;
|
|
uart->huart->CON.TXEN = 1;
|
|
|
|
NVIC_SetPriority(uart->irq, 1);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t es8px_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct es8p_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
uart = (struct es8p_uart *)serial->parent.user_data;
|
|
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* disable rx irq */
|
|
NVIC_DisableIRQ(uart->irq);
|
|
/* disable interrupt */
|
|
UART_ITConfig(uart->huart, UART_IT_RB, DISABLE);
|
|
break;
|
|
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* enable rx irq */
|
|
NVIC_EnableIRQ(uart->irq);
|
|
/* enable interrupt */
|
|
UART_ITConfig(uart->huart, UART_IT_RB, ENABLE);
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int es8px_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
struct es8p_uart *uart;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct es8p_uart *)serial->parent.user_data;
|
|
|
|
while (UART_GetFlagStatus(uart->huart, UART_FLAG_TB) == RESET) ;
|
|
UART_SendByte(uart->huart, c);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int es8px_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch = -1;
|
|
struct es8p_uart *uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct es8p_uart *)serial->parent.user_data;
|
|
|
|
if (UART_GetFlagStatus(uart->huart, UART_FLAG_RB))
|
|
{
|
|
ch = UART_RecByte(uart->huart);
|
|
}
|
|
|
|
return ch;
|
|
}
|
|
|
|
static const struct rt_uart_ops es8px_uart_ops =
|
|
{
|
|
es8px_configure,
|
|
es8px_control,
|
|
es8px_putc,
|
|
es8px_getc,
|
|
};
|
|
|
|
#ifdef BSP_USING_UART0
|
|
/* UART0 device driver structure */
|
|
struct es8p_uart uart0 =
|
|
{
|
|
UART0,
|
|
UART0_IRQn
|
|
};
|
|
|
|
struct rt_serial_device serial0;
|
|
|
|
void UART0_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
if (UART0->IF.RBIF)
|
|
{
|
|
rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART0 */
|
|
|
|
#ifdef BSP_USING_UART1
|
|
/* UART1 device driver structure */
|
|
struct es8p_uart uart1 =
|
|
{
|
|
UART1,
|
|
UART1_IRQn
|
|
};
|
|
|
|
struct rt_serial_device serial1;
|
|
|
|
void UART1_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
if (UART1->IF.RBIF)
|
|
{
|
|
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART1 */
|
|
|
|
#ifdef BSP_USING_UART2
|
|
/* UART1 device driver structure */
|
|
struct es8p_uart uart2 =
|
|
{
|
|
UART2,
|
|
UART2_IRQn
|
|
};
|
|
|
|
struct rt_serial_device serial2;
|
|
|
|
void UART2_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
if (UART2->IF.RBIF)
|
|
{
|
|
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART2 */
|
|
|
|
#ifdef BSP_USING_UART3
|
|
/* UART3 device driver structure */
|
|
struct es8p_uart uart3 =
|
|
{
|
|
UART3,
|
|
UART3_IRQn
|
|
};
|
|
|
|
struct rt_serial_device serial3;
|
|
|
|
void UART3_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
if (UART3->IF.RBIF)
|
|
{
|
|
rt_hw_serial_isr(&serial3, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART3 */
|
|
|
|
#ifdef BSP_USING_UART4
|
|
/* UART4 device driver structure */
|
|
struct es8p_uart uart4 =
|
|
{
|
|
UART4,
|
|
UART4_IRQn
|
|
};
|
|
|
|
struct rt_serial_device serial4;
|
|
|
|
void UART4_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
if (UART4->IF.RBIF)
|
|
{
|
|
rt_hw_serial_isr(&serial4, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART4 */
|
|
|
|
#ifdef BSP_USING_UART5
|
|
/* UART5 device driver structure */
|
|
struct es8p_uart uart5 =
|
|
{
|
|
UART5,
|
|
UART5_IRQn
|
|
};
|
|
|
|
struct rt_serial_device serial5;
|
|
|
|
void UART5_IRQHandler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
if (UART5->IF.RBIF)
|
|
{
|
|
rt_hw_serial_isr(&serial5, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif /* BSP_USING_UART5 */
|
|
|
|
int rt_hw_uart_init(void)
|
|
{
|
|
struct es8p_uart *uart;
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
|
|
#ifdef BSP_USING_UART0
|
|
uart = &uart0;
|
|
serial0.ops = &es8px_uart_ops;
|
|
serial0.config = config;
|
|
|
|
/* register UART0 device */
|
|
rt_hw_serial_register(&serial0, "uart0",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart);
|
|
#endif /* BSP_USING_UART0 */
|
|
|
|
#ifdef BSP_USING_UART1
|
|
uart = &uart1;
|
|
serial1.ops = &es8px_uart_ops;
|
|
serial1.config = config;
|
|
|
|
/* register UART1 device */
|
|
rt_hw_serial_register(&serial1, "uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart);
|
|
#endif /* BSP_USING_UART1 */
|
|
|
|
#ifdef BSP_USING_UART2
|
|
uart = &uart2;
|
|
serial2.ops = &es8px_uart_ops;
|
|
serial2.config = config;
|
|
|
|
/* register UART2 device */
|
|
rt_hw_serial_register(&serial2, "uart2",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart);
|
|
#endif /* BSP_USING_UART2 */
|
|
|
|
#ifdef BSP_USING_UART3
|
|
uart = &uart3;
|
|
serial3.ops = &es8px_uart_ops;
|
|
serial3.config = config;
|
|
|
|
/* register UART3 device */
|
|
rt_hw_serial_register(&serial3, "uart3",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart);
|
|
#endif /* BSP_USING_UART3 */
|
|
|
|
#ifdef BSP_USING_UART4
|
|
uart = &uart4;
|
|
serial4.ops = &es8px_uart_ops;
|
|
serial4.config = config;
|
|
|
|
/* register UART4 device */
|
|
rt_hw_serial_register(&serial4, "uart4",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart);
|
|
#endif /* BSP_USING_UART4 */
|
|
|
|
#ifdef BSP_USING_UART5
|
|
uart = &uart5;
|
|
serial5.ops = &es8px_uart_ops;
|
|
serial5.config = config;
|
|
|
|
/* register UART5 device */
|
|
rt_hw_serial_register(&serial5, "uart5",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart);
|
|
#endif /* BSP_USING_UART5 */
|
|
|
|
return 0;
|
|
}
|
|
INIT_BOARD_EXPORT(rt_hw_uart_init);
|
|
|
|
#endif
|