rt-thread/bsp/imxrt/imxrt1052-nxp-evk
WangQiang d911dc9267 1. 去掉了多余的测试打印信息
2. 恢复了1052的BSP的初始配置
2020-10-12 19:17:01 +08:00
..
applications imxrt:enet: Support imxrt ethernet interface 2019-09-19 11:21:42 +08:00
board 修改了imxrt1052-nxp-evk的BSP的以太网相关配置,用于适配PHY模型 2020-10-12 19:17:00 +08:00
figures [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00
xip [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00
.config 1. 去掉了多余的测试打印信息 2020-10-12 19:17:01 +08:00
Kconfig [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00
README.md Update BSP README with EN Version. 2020-09-09 18:22:26 +08:00
README_zh.md Update BSP README with EN Version. 2020-09-09 18:22:26 +08:00
SConscript [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00
SConstruct 修改了imxrt1052-nxp-evk的BSP的以太网相关配置,用于适配PHY模型 2020-10-12 19:17:00 +08:00
project.ewd [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00
project.ewp [bsp] update project configure file for finsh component change 2019-09-26 15:40:13 +08:00
project.eww [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00
project.uvoptx [bsp] update project configure file for finsh component change 2019-09-26 15:40:13 +08:00
project.uvprojx [bsp] update project configure file for finsh component change 2019-09-26 15:40:13 +08:00
rtconfig.h 1. 去掉了多余的测试打印信息 2020-10-12 19:17:01 +08:00
rtconfig.py fixed gcc assembly option and objcopy option in rtconfig.py for imxrt1052-nxp-evk 2020-08-06 18:03:15 +08:00
template.ewd [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00
template.ewp [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00
template.ewt [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00
template.eww [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00
template.uvoptx [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00
template.uvprojx [bsp/nxp] add new imxrt series 2019-06-13 14:08:36 +08:00

README.md

NXP i. MX RT1050 EVK BSP(Board Support Package) Execution Instruction.

中文页 |

Introduction

This document records the execution instruction of the BSP (board support package) provided by the RT-Thread development team for the NXP i. MX RT1050 EVK development board.

The document is covered in three parts:

  • NXP i. MX RT1050 EVK Board Resources Introduction
  • Quickly Get Started
  • Advanced Features

By reading the Quickly Get Started section developers can quickly get their hands on this BSP and run RT-Thread on the board. More advanced features will be introduced in the Advanced Features section to help developers take advantage of RT-Thread to drive more on-board resources.

Board Resources Introduction

The i.MX RT1050 EVK is a development board based on ARM Cortex-M7. The maximum main frequency is 600 MHz, and it has a wealth of on-board resources that can take full advantage of the RT1052's chip performance.

board

The mainly-used resources of this board are shown as follows:

  • MCU: MIMXRT1052DVL6A. Main Frequency 600MHz,
  • Memory: 256MB SDRAM、512MB Hyper FLASH
  • Common-used peripherals:
    • Motion Sensors: FXOS8700CQ
    • LED
  • Common-used interfaces: USB、SD Card、Ethernet、LCD、Camera.
  • Debug interface: Standard JTAG/SWD. For more details about this board, please refer to nxp.com

Peripheral Condition

Each peripheral supporting condition for this BSP is as follows:

On-chip Peripheral Support Remark
GPIO Support
UART Support UART1

Execution Instruction

Quickly Get Started

This BSP provides MDK 5 and IAR projects for developers and it supports the GCC development environment. Here's an example of the MDK5 development environment, to introduce how to run the system.

Hardware Connection

Use a USB cable to connect the development board to the PC and turn on the power switch.

Compile and Download

Double-click the project.uvprojx file, to open the MDK 5 project, compile and download the project to the board.

By default, the project uses the CMSIS-DAP to download the program, when the CMSIS-DAP connects the board, clicking the download button can download the program to the board.

Running Results

Once the project is successfully downloaded, the system runs automatically. The green LED on the board will flash periodically.

Connect the serial port of the board to the PC, communicate with it via a serial terminal tool(115200-8-1-N). Reset the board and the startup information of RT-Thread will be observed:

 \ | /
- RT -     Thread Operating System
 / | \     4.0.1 build May 5 2019
 2006 - 2019 Copyright by rt-thread team

Advanced Features

This BSP only enables GPIO and serial port 1 by default. If you need more advanced features, you need to configure the BSP with RT-Thread Env tools, as follows:

  1. Open the env tool under BSP;
  2. Enter menuconfig command to configure the project, then save and exit;
  3. Enter pkgs --update command to update the package;
  4. Enter scons --target=mdk4/mdk5/iar command to regenerate the project.

Learn how to use RT-Thread Env, click Here.