126 lines
4.6 KiB
Markdown
126 lines
4.6 KiB
Markdown
# ESP32-C3 BSP Introduction
|
||
|
||
[中文](README_ZH.md) | English
|
||
|
||
This document records the execution instruction of the BSP (board support package) for the [ESP32-C3](http://luatos.com/t/esp32c3) development board.
|
||
|
||
The document is covered in two parts:
|
||
|
||
- Board Resources Introduction
|
||
- Quickly Get Started
|
||
|
||
## Resources Introduction
|
||
|
||
We tested 2 development boards, it all works, but due to the different LED pins of the two development boards, so we'll need to select the corresponding development board in the menuconfig.
|
||
|
||
- [LUATOS_ESP32C3](https://wiki.luatos.com/chips/esp32c3/board.html)
|
||
|
||
|
||
|
||
- [HX-DK-商](https://docs.wireless-tech.cn/doc/7/)
|
||
|
||
|
||
|
||
The mainly-used resources of LUATOS_ESP32C3 are shown as follows:
|
||
|
||
- MCU: [esp32-c3](https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf)，Main Frequency 160MHz, 407.22 CoreMark; 2.55 CoreMark/MHz
|
||
- Built-in Chip: 384KB ROM, 400KB SRAM
|
||
- Peripherals
|
||
- Red LED: 2, LED: D4 (IO12), D5（IO13）
|
||
- Button: 2, K1（BOOT） K2(RST)
|
||
- SPI FLASH: 4M
|
||
- Common-used interfaces: USB, UART, etc.
|
||
|
||
### For more details about this board, please refer to [Here](https://wiki.luatos.com/chips/esp32c3/board.html).
|
||
|
||
## **Peripheral Condition**
|
||
|
||
Each peripheral supporting condition for this BSP is as follows:
|
||
|
||
| **On-board Peripherals** | ****Support**** | ****Remark**** |
|
||
| ------------------------ | --------------- | ------------------------------------------------------------ |
|
||
| GPIO | Support | |
|
||
| UART | Support | Using LUATOS_ESP32C3 development board requires connecting serial port to USB chip UART0_TX and UART0_RX (such as CP2102) |
|
||
| JTAG debug | Support | ESP32C3 usb-linked development boards can be debugged |
|
||
|
||
## Environment construction and compilation
|
||
|
||
1. Download the RISC-V toolchain:
|
||
|
||
```sh
|
||
wget https://github.com/espressif/crosstool-NG/releases/download/esp-2022r1-RC1/riscv32-esp-elf-gcc11_2_0-esp-2022r1-RC1-linux-amd64.tar.xz
|
||
tar xf riscv32-esp-elf-gcc11_2_0-esp-2022r1-RC1-linux-amd64.tar.xz
|
||
```
|
||
|
||
2. Configure the path of the toolchain:
|
||
|
||
Add the local path of the `RISC-V` toolchain to the `EXEC_PATH` variable in the `rtconfig.py` file, or specify the path by setting the `RTT_EXEC_PATH` environment variable, for example:
|
||
|
||
```sh
|
||
export RTT_EXEC_PATH=/opt/riscv32-esp-elf/bin
|
||
```
|
||
|
||
3. Compile
|
||
|
||
Install esptool to convert ELF files to binary flash files:
|
||
|
||
```sh
|
||
pip install esptool
|
||
```
|
||
|
||
Execute the following command on the Linux platform to configure:
|
||
|
||
```
|
||
scons --menuconfig
|
||
```
|
||
|
||
It will automatically download env-related scripts to the `~/.env` directory, and then execute:
|
||
|
||
```sh
|
||
source ~/.env/env.sh
|
||
|
||
cd bsp/ESP32_C3/
|
||
pkgs --update
|
||
```
|
||
|
||
It will automatically download `RT-Thread-packages/esp-idf` and `RT-Thread-packages/FreeRTOS-Wrapper`, after updating the software packages, execute `scons` to compile the board support package.
|
||
|
||
If the compilation is successful, `rtthread.elf`, `rtthread.bin` files will be generated.
|
||
|
||
## Download and program
|
||
|
||
1. Programming tool download
|
||
|
||
The current bsp test uses the `flash_download_tool_3.9.4` tool to program without errors.
|
||
|
||
Programming tool download address: [https://www.espressif.com.cn/sites/default/files/tools/flash_download_tool_3.9.4_0.zip](https://www.espressif.com.cn/sites/default/files/tools/flash_download_tool_3.9.4_0.zip)
|
||
|
||
2. Programming tool configuration
|
||
|
||
Chip model selection `ESP32-C3`
|
||
|
||
Configure the binary file and offset address as follows:
|
||
|
||
| binary file | offset address |
|
||
| ------------------- | -------- |
|
||
| bootloader.bin | 0x0 |
|
||
| partition-table.bin | 0x8000 |
|
||
| rtthread.bin | 0x10000 |
|
||
|
||
Among them, `bootloader.bin` and `partition-table.bin` can be found in the `bsp/ESP32_C3/builtin_imgs` folder. After the configuration is completed, the screenshot is as follows, and then click `START` to download.
|
||
|
||
|
||
|
||
## Notes
|
||
|
||
- The basic functions are now supported, but it needs more, welcome any contributions and feedback.
|
||
|
||
|
||
Maintainer:
|
||
|
||
- [supperthomas](https://github.com/supperthomas) email address: [78900636@qq.com](mailto:78900636@qq.com)
|
||
- [tangzz98](https://github.com/tangzz98) email address: [tangz98@outlook.com](tangz98@outlook.com)
|
||
|
||
Special thanks to [chenyingchun0312](https://github.com/chenyingchun0312) for providing support on the RISC-V part working.
|
||
|