975 lines
57 KiB
C
975 lines
57 KiB
C
//*****************************************************************************
|
|
//
|
|
// hw_lpc.h - Macros used when accessing the LPC hardware.
|
|
//
|
|
// Copyright (c) 2010-2011 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
// laws. You may not combine this software with "viral" open-source
|
|
// software in order to form a larger program.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 8264 of the Stellaris Firmware Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __HW_LPC_H__
|
|
#define __HW_LPC_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the LPC register addresses.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_O_CTL 0x00000000 // LPC Control
|
|
#define LPC_O_STS 0x00000004 // LPC Status
|
|
#define LPC_O_IRQCTL 0x00000008 // LPC IRQ Control
|
|
#define LPC_O_IRQST 0x0000000C // LPC IRQ Status
|
|
#define LPC_O_CH0CTL 0x00000010 // LPC Channel 0 Control
|
|
#define LPC_O_CH0ST 0x00000014 // LPC Channel 0 Status
|
|
#define LPC_O_CH0ADR 0x00000018 // LPC Channel 0 Address
|
|
#define LPC_O_CH1CTL 0x00000020 // LPC Channel 1 Control
|
|
#define LPC_O_CH1ST 0x00000024 // LPC Channel 1 Status
|
|
#define LPC_O_CH1ADR 0x00000028 // LPC Channel 1 Address
|
|
#define LPC_O_CH2CTL 0x00000030 // LPC Channel 2 Control
|
|
#define LPC_O_CH2ST 0x00000034 // LPC Channel 2 Status
|
|
#define LPC_O_CH2ADR 0x00000038 // LPC Channel 2 Address
|
|
#define LPC_O_CH3CTL 0x00000040 // LPC Channel 3 Control
|
|
#define LPC_O_CH3ST 0x00000044 // LPC Channel 3 Status
|
|
#define LPC_O_CH3ADR 0x00000048 // LPC Channel 3 Address
|
|
#define LPC_O_CH4CTL 0x00000050 // LPC Channel 4 Control
|
|
#define LPC_O_CH4ST 0x00000054 // LPC Channel 4 Status
|
|
#define LPC_O_CH4ADR 0x00000058 // LPC Channel 4 Address
|
|
#define LPC_O_CH5CTL 0x00000060 // LPC Channel 5 Control
|
|
#define LPC_O_CH5ST 0x00000064 // LPC Channel 5 Status
|
|
#define LPC_O_CH5ADR 0x00000068 // LPC Channel 5 Address
|
|
#define LPC_O_CH6CTL 0x00000070 // LPC Channel 6 Control
|
|
#define LPC_O_CH6ST 0x00000074 // LPC Channel 6 Status
|
|
#define LPC_O_CH6ADR 0x00000078 // LPC Channel 6 Address
|
|
#define LPC_O_CH7CTL 0x00000080 // LPC Channel 7 / COMx Control
|
|
#define LPC_O_CH7ST 0x00000084 // LPC Channel 7 / COMx Status
|
|
#define LPC_O_CH7ADR 0x00000088 // LPC Channel 7 / COMx Address
|
|
#define LPC_O_STSADDR 0x000000A0 // LPC Status Block Address
|
|
#define LPC_O_IM 0x00000100 // LPC Interrupt Mask
|
|
#define LPC_O_RIS 0x00000104 // LPC Raw Interrupt Status
|
|
#define LPC_O_MIS 0x00000108 // LPC Masked Interrupt Status
|
|
#define LPC_O_IC 0x0000010C // LPC Interrupt Clear
|
|
#define LPC_O_DMACX 0x00000120 // LPC DMA and COMx Control
|
|
#define LPC_O_POOL 0x00000400 // LPC Register Pool
|
|
#define LPC_O_PP 0x00000FC0 // LPC Peripheral Properties
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CTL_SCICNT_M 0x00000C00 // LPC0SCI Pulse Length
|
|
#define LPC_CTL_SCICNT_0 0x00000000 // No pulse occurs on the LPC0SCI
|
|
// pin
|
|
#define LPC_CTL_SCICNT_2 0x00000400 // The pulse on the LPC0SCI pin is
|
|
// 2 LPC0CLK periods
|
|
#define LPC_CTL_SCICNT_4 0x00000800 // The pulse on the LPC0SCI pin is
|
|
// 4 LPC0CLK periods
|
|
#define LPC_CTL_SCICNT_8 0x00000C00 // The pulse on the LPC0SCI pin is
|
|
// 8 LPC0CLK periods
|
|
#define LPC_CTL_SCI 0x00000200 // Start SCI Pulse
|
|
#define LPC_CTL_WAKE 0x00000100 // Restart the LPC Bus
|
|
#define LPC_CTL_CE7 0x00000080 // Enable Channel 7
|
|
#define LPC_CTL_CE6 0x00000040 // Enable Channel 6
|
|
#define LPC_CTL_CE5 0x00000020 // Enable Channel 5
|
|
#define LPC_CTL_CE4 0x00000010 // Enable Channel 4
|
|
#define LPC_CTL_CE3 0x00000008 // Enable Channel 3
|
|
#define LPC_CTL_CE2 0x00000004 // Enable Channel 2
|
|
#define LPC_CTL_CE1 0x00000002 // Enable Channel 1
|
|
#define LPC_CTL_CE0 0x00000001 // Enable Channel 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_STS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_STS_CHCNT_M 0x00700000 // Number of Channels
|
|
#define LPC_STS_POOLSZ_M 0x00070000 // Register Pool Size
|
|
#define LPC_STS_POOLSZ_256 0x00010000 // 256 bytes
|
|
#define LPC_STS_POOLSZ_512 0x00020000 // 512 bytes
|
|
#define LPC_STS_POOLSZ_768 0x00030000 // 768 bytes
|
|
#define LPC_STS_POOLSZ_1024 0x00040000 // 1024 bytes
|
|
#define LPC_STS_RST 0x00000400 // LPC is in Reset
|
|
#define LPC_STS_BUSY 0x00000200 // LPC is Busy
|
|
#define LPC_STS_SLEEP 0x00000100 // LPC is in Sleep Mode
|
|
#define LPC_STS_CA7 0x00000080 // Channel 7 Active
|
|
#define LPC_STS_CA6 0x00000040 // Channel 6 Active
|
|
#define LPC_STS_CA5 0x00000020 // Channel 5 Active
|
|
#define LPC_STS_CA4 0x00000010 // Channel 4 Active
|
|
#define LPC_STS_CA3 0x00000008 // Channel 3 Active
|
|
#define LPC_STS_CA2 0x00000004 // Channel 2 Active
|
|
#define LPC_STS_CA1 0x00000002 // Channel 1 Active
|
|
#define LPC_STS_CA0 0x00000001 // Channel 0 Active
|
|
#define LPC_STS_CHCNT_S 20
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_IRQCTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_IRQCTL_I15 0x80000000 // Manual IRQ15 State
|
|
#define LPC_IRQCTL_I14 0x40000000 // Manual IRQ14 State
|
|
#define LPC_IRQCTL_I13 0x20000000 // Manual IRQ13 State
|
|
#define LPC_IRQCTL_I12 0x10000000 // Manual IRQ12 State
|
|
#define LPC_IRQCTL_I11 0x08000000 // Manual IRQ11 State
|
|
#define LPC_IRQCTL_I10 0x04000000 // Manual IRQ10 State
|
|
#define LPC_IRQCTL_I9 0x02000000 // Manual IRQ9 State
|
|
#define LPC_IRQCTL_I8 0x01000000 // Manual IRQ8 State
|
|
#define LPC_IRQCTL_I7 0x00800000 // Manual IRQ7 State
|
|
#define LPC_IRQCTL_I6 0x00400000 // Manual IRQ6 State
|
|
#define LPC_IRQCTL_I5 0x00200000 // Manual IRQ5 State
|
|
#define LPC_IRQCTL_I4 0x00100000 // Manual IRQ4 State
|
|
#define LPC_IRQCTL_I3 0x00080000 // Manual IRQ3 State
|
|
#define LPC_IRQCTL_I2 0x00040000 // Manual IRQ2 State
|
|
#define LPC_IRQCTL_I1 0x00020000 // Manual IRQ1 State
|
|
#define LPC_IRQCTL_AH 0x00010000 // Active High Control
|
|
#define LPC_IRQCTL_PULSE 0x00000004 // Pulse IRQ States
|
|
#define LPC_IRQCTL_ONCHG 0x00000002 // Initiate on Change
|
|
#define LPC_IRQCTL_SND 0x00000001 // Initiate Immediately
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_IRQST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_IRQST_I15 0x80000000 // Host IRQ15 State
|
|
#define LPC_IRQST_I14 0x40000000 // IRQ14 State
|
|
#define LPC_IRQST_I13 0x20000000 // IRQ13 State
|
|
#define LPC_IRQST_I12 0x10000000 // IRQ12 State
|
|
#define LPC_IRQST_I11 0x08000000 // IRQ11 State
|
|
#define LPC_IRQST_I10 0x04000000 // IRQ10 State
|
|
#define LPC_IRQST_I9 0x02000000 // IRQ9 State
|
|
#define LPC_IRQST_I8 0x01000000 // IRQ8 State
|
|
#define LPC_IRQST_I7 0x00800000 // IRQ7 State
|
|
#define LPC_IRQST_I6 0x00400000 // IRQ6 State
|
|
#define LPC_IRQST_I5 0x00200000 // IRQ5 State
|
|
#define LPC_IRQST_I4 0x00100000 // IRQ4 State
|
|
#define LPC_IRQST_I3 0x00080000 // IRQ3 State
|
|
#define LPC_IRQST_I2 0x00040000 // IRQ2 State
|
|
#define LPC_IRQST_I1 0x00020000 // IRQ1 State
|
|
#define LPC_IRQST_I0 0x00010000 // IRQ0 State
|
|
#define LPC_IRQST_SIRQ 0x00000004 // Pulse IRQ States
|
|
#define LPC_IRQST_CONT 0x00000001 // Initiate Immediately
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH0CTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH0CTL_IRQSEL2_M 0xF0000000 // IRQ Select 2
|
|
#define LPC_CH0CTL_IRQSEL1_M 0x0F000000 // IRQ Select 1
|
|
#define LPC_CH0CTL_IRQSEL0_M 0x00F00000 // IRQ Select 0
|
|
#define LPC_CH0CTL_IRQEN2 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH0CTL_CX 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH0CTL_IRQEN1 0x00040000 // IRQ Enable 1
|
|
#define LPC_CH0CTL_IRQEN0_M 0x00030000 // IRQ Enable 0
|
|
#define LPC_CH0CTL_IRQEN0_DIS 0x00000000 // Trigger disabled
|
|
#define LPC_CH0CTL_IRQEN0_TRIG1 0x00010000 // Trigger 1
|
|
#define LPC_CH0CTL_IRQEN0_TRIG2 0x00020000 // Trigger 2
|
|
#define LPC_CH0CTL_IRQEN0_TRIG3 0x00030000 // Trigger 3
|
|
#define LPC_CH0CTL_ARBDIS 0x00008000 // Arbitration Disabled
|
|
#define LPC_CH0CTL_OFFSET_M 0x00003FE0 // Base Offset in Register Pool
|
|
#define LPC_CH0CTL_AMASK_M 0x0000001C // Address Mask for Ranges
|
|
#define LPC_CH0CTL_AMASK_4 0x00000000 // Address mask of 0x3; mailbox
|
|
// size of 4 bytes for an endpoint
|
|
// range or used for single
|
|
// endpoints
|
|
#define LPC_CH0CTL_AMASK_8 0x00000004 // Address mask of 0x7; mailbox
|
|
// size of 8 bytes
|
|
#define LPC_CH0CTL_AMASK_16 0x00000008 // Address mask of 0xF; mailbox
|
|
// size of 16 bytes
|
|
#define LPC_CH0CTL_AMASK_32 0x0000000C // Address mask of 0x1F; mailbox
|
|
// size of 32 bytes
|
|
#define LPC_CH0CTL_AMASK_64 0x00000010 // Address mask of 0x3F; mailbox
|
|
// size of 64 bytes
|
|
#define LPC_CH0CTL_AMASK_128 0x00000014 // Address mask of 0x7F; mailbox
|
|
// size of 128 bytes
|
|
#define LPC_CH0CTL_AMASK_256 0x00000018 // Address mask of 0xFF; mailbox
|
|
// size of 256 bytes
|
|
#define LPC_CH0CTL_AMASK_512 0x0000001C // Address mask of 0x1FF; mailbox
|
|
// size of 512 bytes
|
|
#define LPC_CH0CTL_TYPE 0x00000001 // Channel Type
|
|
#define LPC_CH0CTL_IRQSEL2_S 28
|
|
#define LPC_CH0CTL_IRQSEL1_S 24
|
|
#define LPC_CH0CTL_IRQSEL0_S 20
|
|
#define LPC_CH0CTL_OFFSET_S 5
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH0ST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH0ST_USER_M 0x00001F00 // User Data
|
|
#define LPC_CH0ST_LASTHW 0x00000080 // Last Host Write
|
|
#define LPC_CH0ST_HW1ST 0x00000040 // First Host Write
|
|
#define LPC_CH0ST_LASTSW 0x00000020 // Last Slave Write
|
|
#define LPC_CH0ST_SW1ST 0x00000010 // First Slave Write
|
|
#define LPC_CH0ST_CMD 0x00000008 // Command or Data
|
|
#define LPC_CH0ST_FRMH 0x00000002 // From-Host Transaction
|
|
#define LPC_CH0ST_TOH 0x00000001 // To-Host Transaction
|
|
#define LPC_CH0ST_USER_S 8
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH0ADR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH0ADR_ADDRH_M 0xFFFF0000 // Upper Address Match
|
|
#define LPC_CH0ADR_ADDRL_M 0x0000FFF8 // Lower Address Match
|
|
#define LPC_CH0ADR_ADDRL1 0x00000002 // Endpoint Match Bit 1
|
|
#define LPC_CH0ADR_ADDRH_S 16
|
|
#define LPC_CH0ADR_ADDRL_S 3
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH1CTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH1CTL_IRQSEL2_M 0xF0000000 // IRQ Select 2
|
|
#define LPC_CH1CTL_IRQSEL1_M 0x0F000000 // IRQ Select 1
|
|
#define LPC_CH1CTL_IRQSEL0_M 0x00F00000 // IRQ Select 0
|
|
#define LPC_CH1CTL_IRQEN2 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH1CTL_CX 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH1CTL_IRQEN1 0x00040000 // IRQ Enable 1
|
|
#define LPC_CH1CTL_IRQEN0_M 0x00030000 // IRQ Enable 0
|
|
#define LPC_CH1CTL_IRQEN0_DIS 0x00000000 // Trigger disabled
|
|
#define LPC_CH1CTL_IRQEN0_TRIG1 0x00010000 // Trigger 1
|
|
#define LPC_CH1CTL_IRQEN0_TRGI2 0x00020000 // Trigger 2
|
|
#define LPC_CH1CTL_IRQEN0_TRGI3 0x00030000 // Trigger 3
|
|
#define LPC_CH1CTL_ARBDIS 0x00008000 // Arbitration Disabled
|
|
#define LPC_CH1CTL_OFFSET_M 0x00003FE0 // Base Offset in Register Pool
|
|
#define LPC_CH1CTL_AMASK_M 0x0000001C // Address Mask for Ranges
|
|
#define LPC_CH1CTL_AMASK_4 0x00000000 // Address mask of 0x3; mailbox
|
|
// size of 4 bytes for an endpoint
|
|
// range or used for single
|
|
// endpoints
|
|
#define LPC_CH1CTL_AMASK_8 0x00000004 // Address mask of 0x7; mailbox
|
|
// size of 8 bytes
|
|
#define LPC_CH1CTL_AMASK_16 0x00000008 // Address mask of 0xF; mailbox
|
|
// size of 16 bytes
|
|
#define LPC_CH1CTL_AMASK_32 0x0000000C // Address mask of 0x1F; mailbox
|
|
// size of 32 bytes
|
|
#define LPC_CH1CTL_AMASK_64 0x00000010 // Address mask of 0x3F; mailbox
|
|
// size of 64 bytes
|
|
#define LPC_CH1CTL_AMASK_128 0x00000014 // Address mask of 0x7F; mailbox
|
|
// size of 128 bytes
|
|
#define LPC_CH1CTL_AMASK_256 0x00000018 // Address mask of 0xFF; mailbox
|
|
// size of 256 bytes
|
|
#define LPC_CH1CTL_AMASK_512 0x0000001C // Address mask of 0x1FF; mailbox
|
|
// size of 512 bytes
|
|
#define LPC_CH1CTL_TYPE 0x00000001 // Channel Type
|
|
#define LPC_CH1CTL_IRQSEL2_S 28
|
|
#define LPC_CH1CTL_IRQSEL1_S 24
|
|
#define LPC_CH1CTL_IRQSEL0_S 20
|
|
#define LPC_CH1CTL_OFFSET_S 5
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH1ST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH1ST_USER_M 0x00001F00 // User Data
|
|
#define LPC_CH1ST_LASTHW 0x00000080 // Last Host Write
|
|
#define LPC_CH1ST_HW1ST 0x00000040 // First Host Write
|
|
#define LPC_CH1ST_LASTSW 0x00000020 // Last Slave Write
|
|
#define LPC_CH1ST_SW1ST 0x00000010 // First Slave Write
|
|
#define LPC_CH1ST_CMD 0x00000008 // Command or Data
|
|
#define LPC_CH1ST_FRMH 0x00000002 // From-Host Transaction
|
|
#define LPC_CH1ST_TOH 0x00000001 // To-Host Transaction
|
|
#define LPC_CH1ST_USER_S 8
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH1ADR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH1ADR_ADDRH_M 0xFFFF0000 // Upper Address Match
|
|
#define LPC_CH1ADR_ADDRL_M 0x0000FFF8 // Lower Address Match
|
|
#define LPC_CH1ADR_ADDRL1 0x00000002 // Endpoint Match Bit 1
|
|
#define LPC_CH1ADR_ADDRH_S 16
|
|
#define LPC_CH1ADR_ADDRL_S 3
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH2CTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH2CTL_IRQSEL2_M 0xF0000000 // IRQ Select 2
|
|
#define LPC_CH2CTL_IRQSEL1_M 0x0F000000 // IRQ Select 1
|
|
#define LPC_CH2CTL_IRQSEL0_M 0x00F00000 // IRQ Select 0
|
|
#define LPC_CH2CTL_CX 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH2CTL_IRQEN2 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH2CTL_IRQEN1 0x00040000 // IRQ Enable 1
|
|
#define LPC_CH2CTL_IRQEN0_M 0x00030000 // IRQ Enable 0
|
|
#define LPC_CH2CTL_IRQEN0_DIS 0x00000000 // Trigger disabled
|
|
#define LPC_CH2CTL_IRQEN0_TRIG1 0x00010000 // Trigger 1
|
|
#define LPC_CH2CTL_IRQEN0_TRIG2 0x00020000 // Trigger 2
|
|
#define LPC_CH2CTL_IRQEN0_TRIG3 0x00030000 // Trigger 3
|
|
#define LPC_CH2CTL_ARBDIS 0x00008000 // Arbitration Disabled
|
|
#define LPC_CH2CTL_OFFSET_M 0x00003FE0 // Base Offset in Register Pool
|
|
#define LPC_CH2CTL_AMASK_M 0x0000001C // Address Mask for Ranges
|
|
#define LPC_CH2CTL_AMASK_4 0x00000000 // Address mask of 0x3; mailbox
|
|
// size of 4 bytes for an endpoint
|
|
// range or used for single
|
|
// endpoints
|
|
#define LPC_CH2CTL_AMASK_8 0x00000004 // Address mask of 0x7; mailbox
|
|
// size of 8 bytes
|
|
#define LPC_CH2CTL_AMASK_16 0x00000008 // Address mask of 0xF; mailbox
|
|
// size of 16 bytes
|
|
#define LPC_CH2CTL_AMASK_32 0x0000000C // Address mask of 0x1F; mailbox
|
|
// size of 32 bytes
|
|
#define LPC_CH2CTL_AMASK_64 0x00000010 // Address mask of 0x3F; mailbox
|
|
// size of 64 bytes
|
|
#define LPC_CH2CTL_AMASK_128 0x00000014 // Address mask of 0x7F; mailbox
|
|
// size of 128 bytes
|
|
#define LPC_CH2CTL_AMASK_256 0x00000018 // Address mask of 0xFF; mailbox
|
|
// size of 256 bytes
|
|
#define LPC_CH2CTL_AMASK_512 0x0000001C // Address mask of 0x1FF; mailbox
|
|
// size of 512 bytes
|
|
#define LPC_CH2CTL_TYPE 0x00000001 // Channel Type
|
|
#define LPC_CH2CTL_IRQSEL2_S 28
|
|
#define LPC_CH2CTL_IRQSEL1_S 24
|
|
#define LPC_CH2CTL_IRQSEL0_S 20
|
|
#define LPC_CH2CTL_OFFSET_S 5
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH2ST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH2ST_USER_M 0x00001F00 // User Data
|
|
#define LPC_CH2ST_LASTHW 0x00000080 // Last Host Write
|
|
#define LPC_CH2ST_HW1ST 0x00000040 // First Host Write
|
|
#define LPC_CH2ST_LASTSW 0x00000020 // Last Slave Write
|
|
#define LPC_CH2ST_SW1ST 0x00000010 // First Slave Write
|
|
#define LPC_CH2ST_CMD 0x00000008 // Command or Data
|
|
#define LPC_CH2ST_FRMH 0x00000002 // From-Host Transaction
|
|
#define LPC_CH2ST_TOH 0x00000001 // To-Host Transaction
|
|
#define LPC_CH2ST_USER_S 8
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH2ADR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH2ADR_ADDRH_M 0xFFFF0000 // Upper Address Match
|
|
#define LPC_CH2ADR_ADDRL_M 0x0000FFF8 // Lower Address Match
|
|
#define LPC_CH2ADR_ADDRL1 0x00000002 // Endpoint Match Bit 1
|
|
#define LPC_CH2ADR_ADDRH_S 16
|
|
#define LPC_CH2ADR_ADDRL_S 3
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH3CTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH3CTL_IRQSEL2_M 0xF0000000 // IRQ Select 2
|
|
#define LPC_CH3CTL_IRQSEL1_M 0x0F000000 // IRQ Select 1
|
|
#define LPC_CH3CTL_IRQSEL0_M 0x00F00000 // IRQ Select 0
|
|
#define LPC_CH3CTL_IRQEN2 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH3CTL_CX 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH3CTL_IRQEN1 0x00040000 // IRQ Enable 1
|
|
#define LPC_CH3CTL_IRQEN0_M 0x00030000 // IRQ Enable 0
|
|
#define LPC_CH3CTL_IRQEN0_DIS 0x00000000 // Trigger disabled
|
|
#define LPC_CH3CTL_IRQEN0_TRIG1 0x00010000 // Trigger 1
|
|
#define LPC_CH3CTL_IRQEN0_TRIG2 0x00020000 // Trigger 2
|
|
#define LPC_CH3CTL_IRQEN0_TRIG3 0x00030000 // Trigger 3
|
|
#define LPC_CH3CTL_ARBDIS 0x00008000 // Arbitration Disabled
|
|
#define LPC_CH3CTL_OFFSET_M 0x00003FE0 // Base Offset in Register Pool
|
|
#define LPC_CH3CTL_AMASK_M 0x0000001C // Address Mask for Ranges
|
|
#define LPC_CH3CTL_AMASK_4 0x00000000 // Address mask of 0x3; mailbox
|
|
// size of 4 bytes for an endpoint
|
|
// range or used for single
|
|
// endpoints
|
|
#define LPC_CH3CTL_AMASK_8 0x00000004 // Address mask of 0x7; mailbox
|
|
// size of 8 bytes
|
|
#define LPC_CH3CTL_AMASK_16 0x00000008 // Address mask of 0xF; mailbox
|
|
// size of 16 bytes
|
|
#define LPC_CH3CTL_AMASK_32 0x0000000C // Address mask of 0x1F; mailbox
|
|
// size of 32 bytes
|
|
#define LPC_CH3CTL_AMASK_64 0x00000010 // Address mask of 0x3F; mailbox
|
|
// size of 64 bytes
|
|
#define LPC_CH3CTL_AMASK_128 0x00000014 // Address mask of 0x7F; mailbox
|
|
// size of 128 bytes
|
|
#define LPC_CH3CTL_AMASK_256 0x00000018 // Address mask of 0xFF; mailbox
|
|
// size of 256 bytes
|
|
#define LPC_CH3CTL_AMASK_512 0x0000001C // Address mask of 0x1FF; mailbox
|
|
// size of 512 bytes
|
|
#define LPC_CH3CTL_TYPE 0x00000001 // Channel Type
|
|
#define LPC_CH3CTL_IRQSEL2_S 28
|
|
#define LPC_CH3CTL_IRQSEL1_S 24
|
|
#define LPC_CH3CTL_IRQSEL0_S 20
|
|
#define LPC_CH3CTL_OFFSET_S 5
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH3ST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH3ST_USER_M 0x00001F00 // User Data
|
|
#define LPC_CH3ST_LASTHW 0x00000080 // Last Host Write
|
|
#define LPC_CH3ST_HW1ST 0x00000040 // First Host Write
|
|
#define LPC_CH3ST_LASTSW 0x00000020 // Last Slave Write
|
|
#define LPC_CH3ST_SW1ST 0x00000010 // First Slave Write
|
|
#define LPC_CH3ST_CMD 0x00000008 // Command or Data
|
|
#define LPC_CH3ST_FRMH 0x00000002 // From-Host Transaction
|
|
#define LPC_CH3ST_TOH 0x00000001 // To-Host Transaction
|
|
#define LPC_CH3ST_USER_S 8
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH3ADR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH3ADR_ADDRH_M 0xFFFF0000 // Upper Address Match
|
|
#define LPC_CH3ADR_ADDRL_M 0x0000FFF8 // Lower Address Match
|
|
#define LPC_CH3ADR_ADDRL1 0x00000002 // Endpoint Match Bit 1
|
|
#define LPC_CH3ADR_ADDRH_S 16
|
|
#define LPC_CH3ADR_ADDRL_S 3
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH4CTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH4CTL_IRQSEL2_M 0xF0000000 // IRQ Select 2
|
|
#define LPC_CH4CTL_IRQSEL1_M 0x0F000000 // IRQ Select 1
|
|
#define LPC_CH4CTL_IRQSEL0_M 0x00F00000 // IRQ Select 0
|
|
#define LPC_CH4CTL_CX 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH4CTL_IRQEN2 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH4CTL_IRQEN1 0x00040000 // IRQ Enable 1
|
|
#define LPC_CH4CTL_IRQEN0_M 0x00030000 // IRQ Enable 0
|
|
#define LPC_CH4CTL_IRQEN0_DIS 0x00000000 // Trigger disabled
|
|
#define LPC_CH4CTL_IRQEN0_TRIG1 0x00010000 // Trigger 1
|
|
#define LPC_CH4CTL_IRQEN0_TRIG2 0x00020000 // Trigger 2
|
|
#define LPC_CH4CTL_IRQEN0_TRIG3 0x00030000 // Trigger 3
|
|
#define LPC_CH4CTL_ARBDIS 0x00008000 // Arbitration Disabled
|
|
#define LPC_CH4CTL_OFFSET_M 0x00003FE0 // Base Offset in Register Pool
|
|
#define LPC_CH4CTL_AMASK_M 0x0000001C // Address Mask for Ranges
|
|
#define LPC_CH4CTL_AMASK_4 0x00000000 // Address mask of 0x3; mailbox
|
|
// size of 4 bytes for an endpoint
|
|
// range or used for single
|
|
// endpoints
|
|
#define LPC_CH4CTL_AMASK_8 0x00000004 // Address mask of 0x7; mailbox
|
|
// size of 8 bytes
|
|
#define LPC_CH4CTL_AMASK_16 0x00000008 // Address mask of 0xF; mailbox
|
|
// size of 16 bytes
|
|
#define LPC_CH4CTL_AMASK_32 0x0000000C // Address mask of 0x1F; mailbox
|
|
// size of 32 bytes
|
|
#define LPC_CH4CTL_AMASK_64 0x00000010 // Address mask of 0x3F; mailbox
|
|
// size of 64 bytes
|
|
#define LPC_CH4CTL_AMASK_128 0x00000014 // Address mask of 0x7F; mailbox
|
|
// size of 128 bytes
|
|
#define LPC_CH4CTL_AMASK_256 0x00000018 // Address mask of 0xFF; mailbox
|
|
// size of 256 bytes
|
|
#define LPC_CH4CTL_AMASK_512 0x0000001C // Address mask of 0x1FF; mailbox
|
|
// size of 512 bytes
|
|
#define LPC_CH4CTL_TYPE 0x00000001 // Channel Type
|
|
#define LPC_CH4CTL_IRQSEL2_S 28
|
|
#define LPC_CH4CTL_IRQSEL1_S 24
|
|
#define LPC_CH4CTL_IRQSEL0_S 20
|
|
#define LPC_CH4CTL_OFFSET_S 5
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH4ST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH4ST_USER_M 0x00001F00 // User Data
|
|
#define LPC_CH4ST_LASTHW 0x00000080 // Last Host Write
|
|
#define LPC_CH4ST_HW1ST 0x00000040 // First Host Write
|
|
#define LPC_CH4ST_LASTSW 0x00000020 // Last Slave Write
|
|
#define LPC_CH4ST_SW1ST 0x00000010 // First Slave Write
|
|
#define LPC_CH4ST_CMD 0x00000008 // Command or Data
|
|
#define LPC_CH4ST_FRMH 0x00000002 // From-Host Transaction
|
|
#define LPC_CH4ST_TOH 0x00000001 // To-Host Transaction
|
|
#define LPC_CH4ST_USER_S 8
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH4ADR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH4ADR_ADDRH_M 0xFFFF0000 // Upper Address Match
|
|
#define LPC_CH4ADR_ADDRL_M 0x0000FFF8 // Lower Address Match
|
|
#define LPC_CH4ADR_ADDRH_S 16
|
|
#define LPC_CH4ADR_ADDRL_S 3
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH5CTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH5CTL_IRQSEL2_M 0xF0000000 // IRQ Select 2
|
|
#define LPC_CH5CTL_IRQSEL1_M 0x0F000000 // IRQ Select 1
|
|
#define LPC_CH5CTL_IRQSEL0_M 0x00F00000 // IRQ Select 0
|
|
#define LPC_CH5CTL_IRQEN2 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH5CTL_CX 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH5CTL_IRQEN1 0x00040000 // IRQ Enable 1
|
|
#define LPC_CH5CTL_IRQEN0_M 0x00030000 // IRQ Enable 0
|
|
#define LPC_CH5CTL_IRQEN0_DIS 0x00000000 // Trigger disabled
|
|
#define LPC_CH5CTL_IRQEN0_TRIG1 0x00010000 // Trigger 1
|
|
#define LPC_CH5CTL_IRQEN0_TRIG2 0x00020000 // Trigger 2
|
|
#define LPC_CH5CTL_IRQEN0_TRIG3 0x00030000 // Trigger 3
|
|
#define LPC_CH5CTL_ARBDIS 0x00008000 // Arbitration Disabled
|
|
#define LPC_CH5CTL_OFFSET_M 0x00003FE0 // Base Offset in Register Pool
|
|
#define LPC_CH5CTL_AMASK_M 0x0000001C // Address Mask for Ranges
|
|
#define LPC_CH5CTL_AMASK_4 0x00000000 // Address mask of 0x3; mailbox
|
|
// size of 4 bytes for an endpoint
|
|
// range or used for single
|
|
// endpoints
|
|
#define LPC_CH5CTL_AMASK_8 0x00000004 // Address mask of 0x7; mailbox
|
|
// size of 8 bytes
|
|
#define LPC_CH5CTL_AMASK_16 0x00000008 // Address mask of 0xF; mailbox
|
|
// size of 16 bytes
|
|
#define LPC_CH5CTL_AMASK_32 0x0000000C // Address mask of 0x1F; mailbox
|
|
// size of 32 bytes
|
|
#define LPC_CH5CTL_AMASK_64 0x00000010 // Address mask of 0x3F; mailbox
|
|
// size of 64 bytes
|
|
#define LPC_CH5CTL_AMASK_128 0x00000014 // Address mask of 0x7F; mailbox
|
|
// size of 128 bytes
|
|
#define LPC_CH5CTL_AMASK_256 0x00000018 // Address mask of 0xFF; mailbox
|
|
// size of 256 bytes
|
|
#define LPC_CH5CTL_AMASK_512 0x0000001C // Address mask of 0x1FF; mailbox
|
|
// size of 512 bytes
|
|
#define LPC_CH5CTL_TYPE 0x00000001 // Channel Type
|
|
#define LPC_CH5CTL_IRQSEL2_S 28
|
|
#define LPC_CH5CTL_IRQSEL1_S 24
|
|
#define LPC_CH5CTL_IRQSEL0_S 20
|
|
#define LPC_CH5CTL_OFFSET_S 5
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH5ST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH5ST_USER_M 0x00001F00 // User Data
|
|
#define LPC_CH5ST_LASTHW 0x00000080 // Last Host Write
|
|
#define LPC_CH5ST_HW1ST 0x00000040 // First Host Write
|
|
#define LPC_CH5ST_LASTSW 0x00000020 // Last Slave Write
|
|
#define LPC_CH5ST_SW1ST 0x00000010 // First Slave Write
|
|
#define LPC_CH5ST_CMD 0x00000008 // Command or Data
|
|
#define LPC_CH5ST_FRMH 0x00000002 // From-Host Transaction
|
|
#define LPC_CH5ST_TOH 0x00000001 // To-Host Transaction
|
|
#define LPC_CH5ST_USER_S 8
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH5ADR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH5ADR_ADDRH_M 0xFFFF0000 // Upper Address Match
|
|
#define LPC_CH5ADR_ADDRL_M 0x0000FFF8 // Lower Address Match
|
|
#define LPC_CH5ADR_ADDRH_S 16
|
|
#define LPC_CH5ADR_ADDRL_S 3
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH6CTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH6CTL_IRQSEL2_M 0xF0000000 // IRQ Select 2
|
|
#define LPC_CH6CTL_IRQSEL1_M 0x0F000000 // IRQ Select 1
|
|
#define LPC_CH6CTL_IRQSEL0_M 0x00F00000 // IRQ Select 0
|
|
#define LPC_CH6CTL_CX 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH6CTL_IRQEN2 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH6CTL_IRQEN1 0x00040000 // IRQ Enable 1
|
|
#define LPC_CH6CTL_IRQEN0_M 0x00030000 // IRQ Enable 0
|
|
#define LPC_CH6CTL_IRQEN0_DIS 0x00000000 // Trigger disabled
|
|
#define LPC_CH6CTL_IRQEN0_TRIG1 0x00010000 // Trigger 1
|
|
#define LPC_CH6CTL_IRQEN0_TRIG2 0x00020000 // Trigger 2
|
|
#define LPC_CH6CTL_IRQEN0_TRIG3 0x00030000 // Trigger 3
|
|
#define LPC_CH6CTL_ARBDIS 0x00008000 // Arbitration Disabled
|
|
#define LPC_CH6CTL_OFFSET_M 0x00003FE0 // Base Offset in Register Pool
|
|
#define LPC_CH6CTL_AMASK_M 0x0000001C // Address Mask for Ranges
|
|
#define LPC_CH6CTL_AMASK_4 0x00000000 // Address mask of 0x3; mailbox
|
|
// size of 4 bytes for an endpoint
|
|
// range or used for single
|
|
// endpoints
|
|
#define LPC_CH6CTL_AMASK_8 0x00000004 // Address mask of 0x7; mailbox
|
|
// size of 8 bytes
|
|
#define LPC_CH6CTL_AMASK_16 0x00000008 // Address mask of 0xF; mailbox
|
|
// size of 16 bytes
|
|
#define LPC_CH6CTL_AMASK_32 0x0000000C // Address mask of 0x1F; mailbox
|
|
// size of 32 bytes
|
|
#define LPC_CH6CTL_AMASK_64 0x00000010 // Address mask of 0x3F; mailbox
|
|
// size of 64 bytes
|
|
#define LPC_CH6CTL_AMASK_128 0x00000014 // Address mask of 0x7F; mailbox
|
|
// size of 128 bytes
|
|
#define LPC_CH6CTL_AMASK_256 0x00000018 // Address mask of 0xFF; mailbox
|
|
// size of 256 bytes
|
|
#define LPC_CH6CTL_AMASK_512 0x0000001C // Address mask of 0x1FF; mailbox
|
|
// size of 512 bytes
|
|
#define LPC_CH6CTL_TYPE 0x00000001 // Channel Type
|
|
#define LPC_CH6CTL_IRQSEL2_S 28
|
|
#define LPC_CH6CTL_IRQSEL1_S 24
|
|
#define LPC_CH6CTL_IRQSEL0_S 20
|
|
#define LPC_CH6CTL_OFFSET_S 5
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH6ST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH6ST_USER_M 0x00001F00 // User Data
|
|
#define LPC_CH6ST_LASTHW 0x00000080 // Last Host Write
|
|
#define LPC_CH6ST_HW1ST 0x00000040 // First Host Write
|
|
#define LPC_CH6ST_LASTSW 0x00000020 // Last Slave Write
|
|
#define LPC_CH6ST_SW1ST 0x00000010 // First Slave Write
|
|
#define LPC_CH6ST_CMD 0x00000008 // Command or Data
|
|
#define LPC_CH6ST_FRMH 0x00000002 // From-Host Transaction
|
|
#define LPC_CH6ST_TOH 0x00000001 // To-Host Transaction
|
|
#define LPC_CH6ST_USER_S 8
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH6ADR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH6ADR_ADDRH_M 0xFFFF0000 // Upper Address Match
|
|
#define LPC_CH6ADR_ADDRL_M 0x0000FFF8 // Lower Address Match
|
|
#define LPC_CH6ADR_ADDRH_S 16
|
|
#define LPC_CH6ADR_ADDRL_S 3
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH7CTL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH7CTL_IRQSEL2_M 0xF0000000 // IRQ Select 2
|
|
#define LPC_CH7CTL_IRQSEL1_M 0x0F000000 // IRQ Select 1
|
|
#define LPC_CH7CTL_IRQSEL0_M 0x00F00000 // IRQ Select 0
|
|
#define LPC_CH7CTL_CX 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH7CTL_IRQEN2 0x00080000 // IRQ Enable 2
|
|
#define LPC_CH7CTL_IRQEN1 0x00040000 // IRQ Enable 1
|
|
#define LPC_CH7CTL_IRQEN0_M 0x00030000 // IRQ Enable 0
|
|
#define LPC_CH7CTL_IRQEN0_AUTO 0x00000000 // The automatic IRQ trigger is
|
|
// disabled
|
|
#define LPC_CH7CTL_IRQEN0_MST 0x00010000 // If TYPE is set, the IRQ selected
|
|
// by IRQSEL0 is triggered when the
|
|
// master wins arbitration (the
|
|
// HW1ST bit is set)
|
|
#define LPC_CH7CTL_IRQEN0_SLV 0x00020000 // If TYPE is set, the IRQ selected
|
|
// by IRQSEL0 is triggered when the
|
|
// slave wins arbitration (the
|
|
// SW1ST bit is set)
|
|
#define LPC_CH7CTL_IRQEN0_TRIG3 0x00030000 // Trigger 3
|
|
#define LPC_CH7CTL_ARBDIS 0x00008000 // Arbitration Disabled
|
|
#define LPC_CH7CTL_OFFSET_M 0x00003FE0 // Base Offset in Register Pool
|
|
#define LPC_CH7CTL_AMASK_M 0x0000001C // Address Mask for Ranges
|
|
#define LPC_CH7CTL_AMASK_4 0x00000000 // Address mask of 0x3; mailbox
|
|
// size of 4 bytes for an endpoint
|
|
// range or used for single
|
|
// endpoints
|
|
#define LPC_CH7CTL_AMASK_8 0x00000004 // Address mask of 0x7; mailbox
|
|
// size of 8 bytes
|
|
#define LPC_CH7CTL_AMASK_16 0x00000008 // Address mask of 0xF; mailbox
|
|
// size of 16 bytes
|
|
#define LPC_CH7CTL_AMASK_32 0x0000000C // Address mask of 0x1F; mailbox
|
|
// size of 32 bytes
|
|
#define LPC_CH7CTL_AMASK_64 0x00000010 // Address mask of 0x3F; mailbox
|
|
// size of 64 bytes
|
|
#define LPC_CH7CTL_AMASK_128 0x00000014 // Address mask of 0x7F; mailbox
|
|
// size of 128 bytes
|
|
#define LPC_CH7CTL_AMASK_256 0x00000018 // Address mask of 0xFF; mailbox
|
|
// size of 256 bytes
|
|
#define LPC_CH7CTL_AMASK_512 0x0000001C // Address mask of 0x1FF; mailbox
|
|
// size of 512 bytes
|
|
#define LPC_CH7CTL_TYPE 0x00000001 // Channel Type
|
|
#define LPC_CH7CTL_IRQSEL2_S 28
|
|
#define LPC_CH7CTL_IRQSEL1_S 24
|
|
#define LPC_CH7CTL_IRQSEL0_S 20
|
|
#define LPC_CH7CTL_OFFSET_S 5
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH7ST register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH7ST_USER_M 0x00001F00 // User Data
|
|
#define LPC_CH7ST_LASTHW 0x00000080 // Last Host Write
|
|
#define LPC_CH7ST_HW1ST 0x00000040 // Host Wrote First
|
|
#define LPC_CH7ST_LASTSW 0x00000020 // Last Slave Write
|
|
#define LPC_CH7ST_SW1ST 0x00000010 // Slave Wrote First
|
|
#define LPC_CH7ST_CMD 0x00000008 // Command or Data
|
|
#define LPC_CH7ST_FRMH 0x00000002 // From-Host Transaction
|
|
#define LPC_CH7ST_TOH 0x00000001 // To-Host Transaction
|
|
#define LPC_CH7ST_USER_S 8
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_CH7ADR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_CH7ADR_ADDRH_M 0xFFFF0000 // Upper Address Match
|
|
#define LPC_CH7ADR_ADDRL_M 0x0000FFF8 // Lower Address Match
|
|
#define LPC_CH7ADR_ADDRH_S 16
|
|
#define LPC_CH7ADR_ADDRL_S 3
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_STSADDR register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_STSADDR_ADDRH_M 0xFFFF0000 // Upper Address Match
|
|
#define LPC_STSADDR_ADDRL_M 0x0000FFF8 // Lower Address Match
|
|
#define LPC_STSADDR_ENA 0x00000001 // Enable Status Block
|
|
#define LPC_STSADDR_ADDRH_S 16
|
|
#define LPC_STSADDR_ADDRL_S 3
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_IM register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_IM_RSTIM 0x80000000 // Reset State Interrupt Mask
|
|
#define LPC_IM_SLEEPIM 0x40000000 // Sleep State Interrupt Mask
|
|
#define LPC_IM_COMXIM 0x20000000 // COMx Interrupt Mask
|
|
#define LPC_IM_SIRQIM 0x10000000 // SERIRQ Frame Complete Interrupt
|
|
// Mask
|
|
#define LPC_IM_CH6IM3 0x08000000 // Channel 6 Interrupt Mask 3
|
|
#define LPC_IM_CH6IM2 0x04000000 // Channel 6 Interrupt Mask 2
|
|
#define LPC_IM_CH6IM1 0x02000000 // Channel 6 Interrupt Mask 1
|
|
#define LPC_IM_CH6IM0 0x01000000 // Channel 6 Interrupt Mask 0
|
|
#define LPC_IM_CH5IM3 0x00800000 // Channel 5 Interrupt Mask 3
|
|
#define LPC_IM_CH5IM2 0x00400000 // Channel 5 Interrupt Mask 2
|
|
#define LPC_IM_CH5IM1 0x00200000 // Channel 5 Interrupt Mask 1
|
|
#define LPC_IM_CH5IM0 0x00100000 // Channel 5 Interrupt Mask 0
|
|
#define LPC_IM_CH4IM3 0x00080000 // Channel 4 Interrupt Mask 3
|
|
#define LPC_IM_CH4IM2 0x00040000 // Channel 4 Interrupt Mask 2
|
|
#define LPC_IM_CH4IM1 0x00020000 // Channel 4 Interrupt Mask 1
|
|
#define LPC_IM_CH4IM0 0x00010000 // Channel 4 Interrupt Mask 0
|
|
#define LPC_IM_CH3IM3 0x00008000 // Channel 3 Interrupt Mask 3
|
|
#define LPC_IM_CH3IM2 0x00004000 // Channel 3 Interrupt Mask 2
|
|
#define LPC_IM_CH3IM1 0x00002000 // Channel 3 Interrupt Mask 1
|
|
#define LPC_IM_CH3IM0 0x00001000 // Channel 3 Interrupt Mask 0
|
|
#define LPC_IM_CH2IM3 0x00000800 // Channel 2 Interrupt Mask 3
|
|
#define LPC_IM_CH2IM2 0x00000400 // Channel 2 Interrupt Mask 2
|
|
#define LPC_IM_CH2IM1 0x00000200 // Channel 2 Interrupt Mask 1
|
|
#define LPC_IM_CH2IM0 0x00000100 // Channel 2 Interrupt Mask 0
|
|
#define LPC_IM_CH1IM3 0x00000080 // Channel 1 Interrupt Mask 3
|
|
#define LPC_IM_CH1IM2 0x00000040 // Channel 1 Interrupt Mask 2
|
|
#define LPC_IM_CH1IM1 0x00000020 // Channel 1 Interrupt Mask 1
|
|
#define LPC_IM_CH1IM0 0x00000010 // Channel 1 Interrupt Mask 0
|
|
#define LPC_IM_CH0IM3 0x00000008 // Channel 0 Interrupt Mask 3
|
|
#define LPC_IM_CH0IM2 0x00000004 // Channel 0 Interrupt Mask 2
|
|
#define LPC_IM_CH0IM1 0x00000002 // Channel 0 Interrupt Mask 1
|
|
#define LPC_IM_CH0IM0 0x00000001 // Channel 0 Interrupt Mask 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_RIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_RIS_RSTRIS 0x80000000 // Reset State Raw Interrupt Status
|
|
#define LPC_RIS_SLEEPRIS 0x40000000 // Sleep State Raw Interrupt Status
|
|
#define LPC_RIS_COMXRIS 0x20000000 // COMx Raw Interrupt Status
|
|
#define LPC_RIS_SIRQRIS 0x10000000 // SERIRQ Frame Complete Raw
|
|
// Interrupt Status
|
|
#define LPC_RIS_CH6RIS3 0x08000000 // Channel 6 Raw Interrupt Status 3
|
|
#define LPC_RIS_CH6RIS2 0x04000000 // Channel 6 Raw Interrupt Status 2
|
|
#define LPC_RIS_CH6RIS1 0x02000000 // Channel 6 Raw Interrupt Status 1
|
|
#define LPC_RIS_CH6RIS0 0x01000000 // Channel 6 Raw Interrupt Status 0
|
|
#define LPC_RIS_CH5RIS3 0x00800000 // Channel 5 Raw Interrupt Status 3
|
|
#define LPC_RIS_CH5RIS2 0x00400000 // Channel 5 Raw Interrupt Status 2
|
|
#define LPC_RIS_CH5RIS1 0x00200000 // Channel 5 Raw Interrupt Status 1
|
|
#define LPC_RIS_CH5RIS0 0x00100000 // Channel 5 Raw Interrupt Status 0
|
|
#define LPC_RIS_CH4RIS3 0x00080000 // Channel 4 Raw Interrupt Status 3
|
|
#define LPC_RIS_CH4RIS2 0x00040000 // Channel 4 Raw Interrupt Status 2
|
|
#define LPC_RIS_CH4RIS1 0x00020000 // Channel 4 Raw Interrupt Status 1
|
|
#define LPC_RIS_CH4RIS0 0x00010000 // Channel 4 Raw Interrupt Status 0
|
|
#define LPC_RIS_CH3RIS3 0x00008000 // Channel 3 Raw Interrupt Status 3
|
|
#define LPC_RIS_CH3RIS2 0x00004000 // Channel 3 Raw Interrupt Status 2
|
|
#define LPC_RIS_CH3RIS1 0x00002000 // Channel 3 Raw Interrupt Status 1
|
|
#define LPC_RIS_CH3RIS0 0x00001000 // Channel 3 Raw Interrupt Status 0
|
|
#define LPC_RIS_CH2RIS3 0x00000800 // Channel 2 Raw Interrupt Status 3
|
|
#define LPC_RIS_CH2RIS2 0x00000400 // Channel 2 Raw Interrupt Status 2
|
|
#define LPC_RIS_CH2RIS1 0x00000200 // Channel 2 Raw Interrupt Status 1
|
|
#define LPC_RIS_CH2RIS0 0x00000100 // Channel 2 Raw Interrupt Status 0
|
|
#define LPC_RIS_CH1RIS3 0x00000080 // Channel 1 Raw Interrupt Status 3
|
|
#define LPC_RIS_CH1RIS2 0x00000040 // Channel 1 Raw Interrupt Status 2
|
|
#define LPC_RIS_CH1RIS1 0x00000020 // Channel 1 Raw Interrupt Status 1
|
|
#define LPC_RIS_CH1RIS0 0x00000010 // Channel 1 Raw Interrupt Status 0
|
|
#define LPC_RIS_CH0RIS3 0x00000008 // Channel 0 Raw Interrupt Status 3
|
|
#define LPC_RIS_CH0RIS2 0x00000004 // Channel 0 Raw Interrupt Status 2
|
|
#define LPC_RIS_CH0RIS1 0x00000002 // Channel 0 Raw Interrupt Status 1
|
|
#define LPC_RIS_CH0RIS0 0x00000001 // Channel 0 Raw Interrupt Status 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_MIS register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_MIS_RSTMIS 0x80000000 // Reset State Masked Interrupt
|
|
// Status
|
|
#define LPC_MIS_SLEEPMIS 0x40000000 // Sleep State Masked Interrupt
|
|
// Status
|
|
#define LPC_MIS_COMXMIS 0x20000000 // COMx Masked Interrupt Status
|
|
#define LPC_MIS_SIRQMIS 0x10000000 // SERIRQ Frame Complete Masked
|
|
// Interrupt Status
|
|
#define LPC_MIS_CH6MIS3 0x08000000 // Channel 6 Masked Interrupt
|
|
// Status 3
|
|
#define LPC_MIS_CH6MIS2 0x04000000 // Channel 6 Masked Interrupt
|
|
// Status 2
|
|
#define LPC_MIS_CH6MIS1 0x02000000 // Channel 6 Masked Interrupt
|
|
// Status 1
|
|
#define LPC_MIS_CH6MIS0 0x01000000 // Channel 6 Masked Interrupt
|
|
// Status 0
|
|
#define LPC_MIS_CH5MIS3 0x00800000 // Channel 5 Masked Interrupt
|
|
// Status 3
|
|
#define LPC_MIS_CH5MIS2 0x00400000 // Channel 5 Masked Interrupt
|
|
// Status 2
|
|
#define LPC_MIS_CH5MIS1 0x00200000 // Channel 5 Masked Interrupt
|
|
// Status 1
|
|
#define LPC_MIS_CH5MIS0 0x00100000 // Channel 5 Masked Interrupt
|
|
// Status 0
|
|
#define LPC_MIS_CH4MIS3 0x00080000 // Channel 4 Masked Interrupt
|
|
// Status 3
|
|
#define LPC_MIS_CH4MIS2 0x00040000 // Channel 4 Masked Interrupt
|
|
// Status 2
|
|
#define LPC_MIS_CH4MIS1 0x00020000 // Channel 4 Masked Interrupt
|
|
// Status 1
|
|
#define LPC_MIS_CH4MIS0 0x00010000 // Channel 4 Masked Interrupt
|
|
// Status 0
|
|
#define LPC_MIS_CH3MIS3 0x00008000 // Channel 3 Masked Interrupt
|
|
// Status 3
|
|
#define LPC_MIS_CH3MIS2 0x00004000 // Channel 3 Masked Interrupt
|
|
// Status 2
|
|
#define LPC_MIS_CH3MIS1 0x00002000 // Channel 3 Masked Interrupt
|
|
// Status 1
|
|
#define LPC_MIS_CH3MIS0 0x00001000 // Channel 3 Masked Interrupt
|
|
// Status 0
|
|
#define LPC_MIS_CH2MIS3 0x00000800 // Channel 2 Masked Interrupt
|
|
// Status 3
|
|
#define LPC_MIS_CH2MIS2 0x00000400 // Channel 2 Masked Interrupt
|
|
// Status 2
|
|
#define LPC_MIS_CH2MIS1 0x00000200 // Channel 2 Masked Interrupt
|
|
// Status 1
|
|
#define LPC_MIS_CH2MIS0 0x00000100 // Channel 2 Masked Interrupt
|
|
// Status 0
|
|
#define LPC_MIS_CH1MIS3 0x00000080 // Channel 1 Masked Interrupt
|
|
// Status 3
|
|
#define LPC_MIS_CH1MIS2 0x00000040 // Channel 1 Masked Interrupt
|
|
// Status 2
|
|
#define LPC_MIS_CH1MIS1 0x00000020 // Channel 1 Masked Interrupt
|
|
// Status 1
|
|
#define LPC_MIS_CH1MIS0 0x00000010 // Channel 1 Masked Interrupt
|
|
// Status 0
|
|
#define LPC_MIS_CH0MIS3 0x00000008 // Channel 0 Masked Interrupt
|
|
// Status 3
|
|
#define LPC_MIS_CH0MIS2 0x00000004 // Channel 0 Masked Interrupt
|
|
// Status 2
|
|
#define LPC_MIS_CH0MIS1 0x00000002 // Channel 0 Masked Interrupt
|
|
// Status 1
|
|
#define LPC_MIS_CH0MIS0 0x00000001 // Channel 0 Masked Interrupt
|
|
// Status 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_IC register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_IC_RSTIC 0x80000000 // Reset State Interrupt Clear
|
|
#define LPC_IC_SLEEPIC 0x40000000 // Sleep State Interrupt Clear
|
|
#define LPC_IC_COMXIC 0x20000000 // COMx Interrupt Clear
|
|
#define LPC_IC_SIRQRIC 0x10000000 // SERIRQ Frame Complete Interrupt
|
|
// Clear
|
|
#define LPC_IC_CH6IC3 0x08000000 // Channel 6 Interrupt Clear 3
|
|
#define LPC_IC_CH6IC2 0x04000000 // Channel 6 Interrupt Clear 2
|
|
#define LPC_IC_CH6IC1 0x02000000 // Channel 6 Interrupt Clear 1
|
|
#define LPC_IC_CH6IC0 0x01000000 // Channel 6 Interrupt Clear 0
|
|
#define LPC_IC_CH5IC3 0x00800000 // Channel 5 Interrupt Clear 3
|
|
#define LPC_IC_CH5IC2 0x00400000 // Channel 5 Interrupt Clear 2
|
|
#define LPC_IC_CH5IC1 0x00200000 // Channel 5 Interrupt Clear 1
|
|
#define LPC_IC_CH5IC0 0x00100000 // Channel 5 Interrupt Clear 0
|
|
#define LPC_IC_CH4IC3 0x00080000 // Channel 4 Interrupt Clear 3
|
|
#define LPC_IC_CH4IC2 0x00040000 // Channel 4 Interrupt Clear 2
|
|
#define LPC_IC_CH4IC1 0x00020000 // Channel 4 Interrupt Clear 1
|
|
#define LPC_IC_CH4IC0 0x00010000 // Channel 4 Interrupt Clear 0
|
|
#define LPC_IC_CH3IC3 0x00008000 // Channel 3 Interrupt Clear 3
|
|
#define LPC_IC_CH3IC2 0x00004000 // Channel 3 Interrupt Clear 2
|
|
#define LPC_IC_CH3IC1 0x00002000 // Channel 3 Interrupt Clear 1
|
|
#define LPC_IC_CH3IC0 0x00001000 // Channel 3 Interrupt Clear 0
|
|
#define LPC_IC_CH2IC3 0x00000800 // Channel 2 Interrupt Clear 3
|
|
#define LPC_IC_CH2IC2 0x00000400 // Channel 2 Interrupt Clear 2
|
|
#define LPC_IC_CH2IC1 0x00000200 // Channel 2 Interrupt Clear 1
|
|
#define LPC_IC_CH2IC0 0x00000100 // Channel 2 Interrupt Clear 0
|
|
#define LPC_IC_CH1IC3 0x00000080 // Channel 1 Interrupt Clear 3
|
|
#define LPC_IC_CH1IC2 0x00000040 // Channel 1 Interrupt Clear 2
|
|
#define LPC_IC_CH1IC1 0x00000020 // Channel 1 Interrupt Clear 1
|
|
#define LPC_IC_CH1IC0 0x00000010 // Channel 1 Interrupt Clear 0
|
|
#define LPC_IC_CH0IC3 0x00000008 // Channel 0 Interrupt Clear 3
|
|
#define LPC_IC_CH0IC2 0x00000004 // Channel 0 Interrupt Clear 2
|
|
#define LPC_IC_CH0IC1 0x00000002 // Channel 0 Interrupt Clear 1
|
|
#define LPC_IC_CH0IC0 0x00000001 // Channel 0 Interrupt Clear 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_DMACX register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_DMACX_CXRES 0x02000000 // Raw Event State for COMx
|
|
#define LPC_DMACX_CXTXRES 0x01000000 // Raw Event State for COMx TX
|
|
#define LPC_DMACX_CXRXRES 0x00800000 // Raw Event State for COMx RX
|
|
#define LPC_DMACX_CXEM 0x00200000 // Event Mask for COMx
|
|
#define LPC_DMACX_CXTXEM 0x00100000 // Event Mask for COMx TX
|
|
#define LPC_DMACX_CXRXEM 0x00080000 // Event Mask for COMx RX
|
|
#define LPC_DMACX_CXACT_M 0x00060000 // COMx Action
|
|
#define LPC_DMACX_CXACT_FRMHNML 0x00000000 // Treat as normal FRMH model and
|
|
// let be full (and so marked as
|
|
// full)
|
|
#define LPC_DMACX_CXACT_FRMHIGN 0x00020000 // Ignore FRMH bytes and continue
|
|
// to mark FRMH as empty
|
|
#define LPC_DMACX_CXACT_FRMHDMA 0x00040000 // COMx DMA on FRMH byte (e.g. to
|
|
// memory)
|
|
#define LPC_DMACX_CXACT_UARTDMA 0x00060000 // COMx DMA model with UART
|
|
#define LPC_DMACX_COMX 0x00010000 // COMx Handling
|
|
#define LPC_DMACX_C3W 0x00000080 // Write Control for Channel 3
|
|
#define LPC_DMACX_C3R 0x00000040 // Read Control for Channel 3
|
|
#define LPC_DMACX_C2W 0x00000020 // Write Control for Channel 2
|
|
#define LPC_DMACX_C2R 0x00000010 // Read Control for Channel 2
|
|
#define LPC_DMACX_C1W 0x00000008 // Write Control for Channel 1
|
|
#define LPC_DMACX_C1R 0x00000004 // Read Control for Channel 1
|
|
#define LPC_DMACX_C0W 0x00000002 // Write Control for Channel 0
|
|
#define LPC_DMACX_C0R 0x00000001 // Read Control for Channel 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_POOL register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_POOL_BYTE3_M 0xFF000000 // Byte 3
|
|
#define LPC_POOL_BYTE2_M 0x00FF0000 // Byte 2
|
|
#define LPC_POOL_BYTE1_M 0x0000FF00 // Byte 1
|
|
#define LPC_POOL_BYTE0_M 0x000000FF // Byte 0
|
|
#define LPC_POOL_BYTE3_S 24
|
|
#define LPC_POOL_BYTE2_S 16
|
|
#define LPC_POOL_BYTE1_S 8
|
|
#define LPC_POOL_BYTE0_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following are defines for the bit fields in the LPC_O_PP register.
|
|
//
|
|
//*****************************************************************************
|
|
#define LPC_PP_COMX 0x00000010 // COMx Support Available
|
|
#define LPC_PP_CHANCNT_M 0x0000000F // Number of Channels (Excluding
|
|
// COMx)
|
|
#define LPC_PP_CHANCNT_S 0
|
|
|
|
#endif // __HW_LPC_H__
|