265 lines
8.2 KiB
C
265 lines
8.2 KiB
C
/*
|
|
* Copyright (c) 2006-2021, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2018-12-04 zylx first version
|
|
*/
|
|
|
|
#include <board.h>
|
|
|
|
#ifdef BSP_USING_SDRAM
|
|
#include <sdram_port.h>
|
|
|
|
#define DRV_DEBUG
|
|
#define LOG_TAG "drv.sdram"
|
|
#include <drv_log.h>
|
|
|
|
static SDRAM_HandleTypeDef hsdram1;
|
|
static FMC_SDRAM_CommandTypeDef command;
|
|
#ifdef RT_USING_MEMHEAP_AS_HEAP
|
|
static struct rt_memheap system_heap;
|
|
#endif
|
|
|
|
/**
|
|
* @brief Perform the SDRAM exernal memory inialization sequence
|
|
* @param hsdram: SDRAM handle
|
|
* @param Command: Pointer to SDRAM command structure
|
|
* @retval None
|
|
*/
|
|
static void SDRAM_Initialization_Sequence(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command)
|
|
{
|
|
__IO uint32_t tmpmrd = 0;
|
|
uint32_t target_bank = 0;
|
|
|
|
#if SDRAM_TARGET_BANK == 1
|
|
target_bank = FMC_SDRAM_CMD_TARGET_BANK1;
|
|
#else
|
|
target_bank = FMC_SDRAM_CMD_TARGET_BANK2;
|
|
#endif
|
|
|
|
/* Configure a clock configuration enable command */
|
|
Command->CommandMode = FMC_SDRAM_CMD_CLK_ENABLE;
|
|
Command->CommandTarget = target_bank;
|
|
Command->AutoRefreshNumber = 1;
|
|
Command->ModeRegisterDefinition = 0;
|
|
|
|
/* Send the command */
|
|
HAL_SDRAM_SendCommand(hsdram, Command, 0x1000);
|
|
|
|
/* Insert 100 ms delay */
|
|
/* interrupt is not enable, just to delay some time. */
|
|
for (tmpmrd = 0; tmpmrd < 0xffffff; tmpmrd ++)
|
|
;
|
|
|
|
/* Configure a PALL (precharge all) command */
|
|
Command->CommandMode = FMC_SDRAM_CMD_PALL;
|
|
Command->CommandTarget = target_bank;
|
|
Command->AutoRefreshNumber = 1;
|
|
Command->ModeRegisterDefinition = 0;
|
|
|
|
/* Send the command */
|
|
HAL_SDRAM_SendCommand(hsdram, Command, 0x1000);
|
|
|
|
/* Configure a Auto-Refresh command */
|
|
Command->CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE;
|
|
Command->CommandTarget = target_bank;
|
|
Command->AutoRefreshNumber = 8;
|
|
Command->ModeRegisterDefinition = 0;
|
|
|
|
/* Send the command */
|
|
HAL_SDRAM_SendCommand(hsdram, Command, 0x1000);
|
|
|
|
/* Program the external memory mode register */
|
|
#if SDRAM_DATA_WIDTH == 8
|
|
tmpmrd = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_1 |
|
|
#elif SDRAM_DATA_WIDTH == 16
|
|
tmpmrd = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_2 |
|
|
#else
|
|
tmpmrd = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_4 |
|
|
#endif
|
|
SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL |
|
|
#if SDRAM_CAS_LATENCY == 3
|
|
SDRAM_MODEREG_CAS_LATENCY_3 |
|
|
#else
|
|
SDRAM_MODEREG_CAS_LATENCY_2 |
|
|
#endif
|
|
SDRAM_MODEREG_OPERATING_MODE_STANDARD |
|
|
SDRAM_MODEREG_WRITEBURST_MODE_SINGLE;
|
|
|
|
Command->CommandMode = FMC_SDRAM_CMD_LOAD_MODE;
|
|
Command->CommandTarget = target_bank;
|
|
Command->AutoRefreshNumber = 1;
|
|
Command->ModeRegisterDefinition = tmpmrd;
|
|
|
|
/* Send the command */
|
|
HAL_SDRAM_SendCommand(hsdram, Command, 0x1000);
|
|
|
|
/* Set the device refresh counter */
|
|
HAL_SDRAM_ProgramRefreshRate(hsdram, SDRAM_REFRESH_COUNT);
|
|
}
|
|
|
|
static int SDRAM_Init(void)
|
|
{
|
|
int result = RT_EOK;
|
|
FMC_SDRAM_TimingTypeDef SDRAM_Timing;
|
|
|
|
/* SDRAM device configuration */
|
|
hsdram1.Instance = FMC_SDRAM_DEVICE;
|
|
SDRAM_Timing.LoadToActiveDelay = LOADTOACTIVEDELAY;
|
|
SDRAM_Timing.ExitSelfRefreshDelay = EXITSELFREFRESHDELAY;
|
|
SDRAM_Timing.SelfRefreshTime = SELFREFRESHTIME;
|
|
SDRAM_Timing.RowCycleDelay = ROWCYCLEDELAY;
|
|
SDRAM_Timing.WriteRecoveryTime = WRITERECOVERYTIME;
|
|
SDRAM_Timing.RPDelay = RPDELAY;
|
|
SDRAM_Timing.RCDDelay = RCDDELAY;
|
|
|
|
#if SDRAM_TARGET_BANK == 1
|
|
hsdram1.Init.SDBank = FMC_SDRAM_BANK1;
|
|
#else
|
|
hsdram1.Init.SDBank = FMC_SDRAM_BANK2;
|
|
#endif
|
|
#if SDRAM_COLUMN_BITS == 8
|
|
hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_8;
|
|
#elif SDRAM_COLUMN_BITS == 9
|
|
hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_9;
|
|
#elif SDRAM_COLUMN_BITS == 10
|
|
hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_10;
|
|
#else
|
|
hsdram1.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_11;
|
|
#endif
|
|
#if SDRAM_ROW_BITS == 11
|
|
hsdram1.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_11;
|
|
#elif SDRAM_ROW_BITS == 12
|
|
hsdram1.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_12;
|
|
#else
|
|
hsdram1.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_13;
|
|
#endif
|
|
|
|
#if SDRAM_DATA_WIDTH == 8
|
|
hsdram1.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_8;
|
|
#elif SDRAM_DATA_WIDTH == 16
|
|
hsdram1.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_16;
|
|
#else
|
|
hsdram1.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_32;
|
|
#endif
|
|
hsdram1.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
|
|
#if SDRAM_CAS_LATENCY == 1
|
|
hsdram1.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_1;
|
|
#elif SDRAM_CAS_LATENCY == 2
|
|
hsdram1.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_2;
|
|
#else
|
|
hsdram1.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_3;
|
|
#endif
|
|
hsdram1.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
|
|
#if SDCLOCK_PERIOD == 2
|
|
hsdram1.Init.SDClockPeriod = FMC_SDRAM_CLOCK_PERIOD_2;
|
|
#else
|
|
hsdram1.Init.SDClockPeriod = FMC_SDRAM_CLOCK_PERIOD_3;
|
|
#endif
|
|
hsdram1.Init.ReadBurst = FMC_SDRAM_RBURST_ENABLE;
|
|
#if SDRAM_RPIPE_DELAY == 0
|
|
hsdram1.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
|
|
#elif SDRAM_RPIPE_DELAY == 1
|
|
hsdram1.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_1;
|
|
#else
|
|
hsdram1.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_2;
|
|
#endif
|
|
|
|
/* Initialize the SDRAM controller */
|
|
if (HAL_SDRAM_Init(&hsdram1, &SDRAM_Timing) != HAL_OK)
|
|
{
|
|
LOG_E("SDRAM init failed!");
|
|
result = -RT_ERROR;
|
|
}
|
|
else
|
|
{
|
|
/* Program the SDRAM external device */
|
|
SDRAM_Initialization_Sequence(&hsdram1, &command);
|
|
LOG_D("sdram init success, mapped at 0x%X, size is %d bytes, data width is %d", SDRAM_BANK_ADDR, SDRAM_SIZE, SDRAM_DATA_WIDTH);
|
|
#ifdef RT_USING_MEMHEAP_AS_HEAP
|
|
/* If RT_USING_MEMHEAP_AS_HEAP is enabled, SDRAM is initialized to the heap */
|
|
rt_memheap_init(&system_heap, "sdram", (void *)SDRAM_BANK_ADDR, SDRAM_SIZE);
|
|
#endif
|
|
}
|
|
|
|
return result;
|
|
}
|
|
INIT_BOARD_EXPORT(SDRAM_Init);
|
|
|
|
#ifdef DRV_DEBUG
|
|
#ifdef FINSH_USING_MSH
|
|
int sdram_test(void)
|
|
{
|
|
int i = 0;
|
|
uint32_t start_time = 0, time_cast = 0;
|
|
#if SDRAM_DATA_WIDTH == 8
|
|
char data_width = 1;
|
|
uint8_t data = 0;
|
|
#elif SDRAM_DATA_WIDTH == 16
|
|
char data_width = 2;
|
|
uint16_t data = 0;
|
|
#else
|
|
char data_width = 4;
|
|
uint32_t data = 0;
|
|
#endif
|
|
|
|
/* write data */
|
|
LOG_D("Writing the %ld bytes data, waiting....", SDRAM_SIZE);
|
|
start_time = rt_tick_get();
|
|
for (i = 0; i < SDRAM_SIZE / data_width; i++)
|
|
{
|
|
#if SDRAM_DATA_WIDTH == 8
|
|
*(__IO uint8_t *)(SDRAM_BANK_ADDR + i * data_width) = (uint8_t)(i % 100);
|
|
#elif SDRAM_DATA_WIDTH == 16
|
|
*(__IO uint16_t *)(SDRAM_BANK_ADDR + i * data_width) = (uint16_t)(i % 1000);
|
|
#else
|
|
*(__IO uint32_t *)(SDRAM_BANK_ADDR + i * data_width) = (uint32_t)(i % 1000);
|
|
#endif
|
|
}
|
|
time_cast = rt_tick_get() - start_time;
|
|
LOG_D("Write data success, total time: %d.%03dS.", time_cast / RT_TICK_PER_SECOND,
|
|
time_cast % RT_TICK_PER_SECOND / ((RT_TICK_PER_SECOND * 1 + 999) / 1000));
|
|
|
|
/* read data */
|
|
LOG_D("start Reading and verifying data, waiting....");
|
|
for (i = 0; i < SDRAM_SIZE / data_width; i++)
|
|
{
|
|
#if SDRAM_DATA_WIDTH == 8
|
|
data = *(__IO uint8_t *)(SDRAM_BANK_ADDR + i * data_width);
|
|
if (data != i % 100)
|
|
{
|
|
LOG_E("SDRAM test failed!");
|
|
break;
|
|
}
|
|
#elif SDRAM_DATA_WIDTH == 16
|
|
data = *(__IO uint16_t *)(SDRAM_BANK_ADDR + i * data_width);
|
|
if (data != i % 1000)
|
|
{
|
|
LOG_E("SDRAM test failed!");
|
|
break;
|
|
}
|
|
#else
|
|
data = *(__IO uint32_t *)(SDRAM_BANK_ADDR + i * data_width);
|
|
if (data != i % 1000)
|
|
{
|
|
LOG_E("SDRAM test failed!");
|
|
break;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
if (i >= SDRAM_SIZE / data_width)
|
|
{
|
|
LOG_D("SDRAM test success!");
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
MSH_CMD_EXPORT(sdram_test, sdram test)
|
|
#endif /* FINSH_USING_MSH */
|
|
#endif /* DRV_DEBUG */
|
|
#endif /* BSP_USING_SDRAM */
|