250 lines
9.3 KiB
Plaintext
250 lines
9.3 KiB
Plaintext
/*******************************************************************************
|
|
* (c) Copyright 2015 Microsemi SoC Products Group. All rights reserved.
|
|
*
|
|
* file name : debug-in-microsemi-smartfusion2-envm.ld
|
|
* SmartFusion2 Cortex-M3 linker script for creating a SoftConsole downloadable
|
|
* debug image executing in SmartFusion2 internal eNVM.
|
|
*
|
|
* Some current (April 2015) dev kit memory map possibilities are
|
|
* --Type-------Device-----------address start---address end----size---Dbus--RAM IC-------SF2--Comment---------------
|
|
* --eNVM-------M2S010-----------0x60000000------0x6007FFFF-----256KB---------------------010------------------------
|
|
* --eNVM-------M2S090-----------0x60000000------0x6007FFFF-----512KB---------------------090------------------------
|
|
* --eSRAM------M2Sxxx-----------0x20000000------0x2000FFFF-----64KB----------------------xxx--All have same amount--
|
|
* --eSRAM------M2Sxxx-----------0x20000000------0x20013FFF-----80KB----------------------xxx--If ECC/SECDED not used
|
|
* --Fabric-----M2S010-----------0x30000000------0x6007FFFF-----400Kb---------------------010--note-K bits-----------
|
|
* --Fabric-----M2S090-----------0x30000000------0x6007FFFF-----2074Kb--------------------090--note-K bits-----------
|
|
* --LPDDR------STARTER-KIT------0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----050------------------------
|
|
* --LPDDR------484-STARTER-KIT--0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16-----010------------------------
|
|
* --LPDDR------SEC-EVAL-KIT-----0xA0000000------0xA3FFFFFF-----64MB---16--MT46H32M16LF---090--Security eval kit-----
|
|
* --DDR3-------ADevKit----------0xA0000000------0xBFFFFFFF-----1GB----32--MT41K256M8DA---150------------------------
|
|
* --Some older physical memory map possibilities are
|
|
* --Type-------location---------address start---address end----size---Dbus---RAM IC------SF2--Comment--------------
|
|
* --LPDDR------EVAL KIT---------0xA0000000------0xA3FFFFFF-----64MB-=-16--MT46H32M16LF---025--Eval Kit--------------
|
|
* --DDR3-------DevKit-----------0xA0000000------0xAFFFFFFF-----512MB--16--MT41K256M8DA---050------------------------
|
|
*
|
|
* Example linker scripts use lowest practicl values so will work accross dev kits
|
|
* eNVM=256KB eRAM=64KB External memory = 64MB
|
|
*
|
|
* On reset, the eNVM region is mapped to 0x00000000
|
|
* This is changed below by setting the __smartfusion2_memory_remap variable as required.
|
|
* Options are detailed below.
|
|
*
|
|
* SVN $Revision: 7419 $
|
|
* SVN $Date: 2015-05-15 21:20:21 +0530 (Fri, 15 May 2015) $
|
|
*/
|
|
|
|
OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
|
|
GROUP(-lc -lgcc -lm)
|
|
OUTPUT_ARCH(arm)
|
|
ENTRY(Reset_Handler)
|
|
SEARCH_DIR(.)
|
|
__DYNAMIC = 0;
|
|
|
|
/*******************************************************************************
|
|
* Start of board customization.
|
|
*******************************************************************************/
|
|
MEMORY
|
|
{
|
|
/*
|
|
* In general, example LD scripts use lowest common memory footprint
|
|
* so will work with all devices.
|
|
*/
|
|
/*
|
|
* WARNING: The words "SOFTCONSOLE", "FLASH", and "USE", the colon ":", and
|
|
* the name of the type of flash memory are all in a specific order.
|
|
* Please do not modify that comment line, in order to ensure
|
|
* debugging of your application will use the flash memory correctly.
|
|
*/
|
|
|
|
/* SOFTCONSOLE FLASH USE: microsemi-smartfusion2-envm */
|
|
rom (rx) : ORIGIN = 0x60000000, LENGTH = 256k
|
|
|
|
/* SmartFusion2 internal eNVM mirrored to 0x00000000 */
|
|
romMirror (rx) : ORIGIN = 0x00000000, LENGTH = 256k
|
|
|
|
/* SmartFusion2 internal eSRAM */
|
|
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64k
|
|
}
|
|
|
|
RAM_START_ADDRESS = 0x20000000; /* Must be the same value MEMORY region ram ORIGIN above. */
|
|
RAM_SIZE = 64k; /* Must be the same value MEMORY region ram LENGTH above. */
|
|
MAIN_STACK_SIZE = 4k; /* Cortex main stack size. */
|
|
MIN_SIZE_HEAP = 4k; /* needs to be calculated for your application */
|
|
|
|
/*******************************************************************************
|
|
* End of board customization.
|
|
*******************************************************************************/
|
|
|
|
PROVIDE (__main_stack_start = RAM_START_ADDRESS + RAM_SIZE);
|
|
PROVIDE (_estack = __main_stack_start);
|
|
PROVIDE (__mirrored_nvm = 1); /* Indicate to startup code that NVM is mirrored to VMA address and no text copy is required. */
|
|
|
|
/*
|
|
* Remap instruction for startup code and debugger.
|
|
* set __smartfusion2_memory_remap to one of the following:
|
|
* 0: remap eNVM to address 0x00000000 Production mode or debugging from eNVM
|
|
* 1: remap eSRAM to address 0x00000000 Debugging from eSRAM
|
|
* 2: remap external DDR memory to address 0x00000000 Debugging from DDR memory
|
|
*/
|
|
PROVIDE (__smartfusion2_memory_remap = 0);
|
|
|
|
SECTIONS
|
|
{
|
|
.vector_table : ALIGN(0x10)
|
|
{
|
|
__vector_table_load = LOADADDR(.vector_table);
|
|
__vector_table_start = .;
|
|
__vector_table_vma_base_address = .; /* required by debugger for start address */
|
|
KEEP(*(.isr_vector))
|
|
. = ALIGN(0x10);
|
|
_evector_table = .;
|
|
} >romMirror AT>rom
|
|
|
|
/* all data and code run/used before reloaction must be located here */
|
|
/* When all code in NVRAM, no requirement for this section- but adds clarity when looking at .lst file */
|
|
.boot_code : ALIGN(0x10)
|
|
{
|
|
*(.boot_code) /* reset handler */
|
|
*system_m2sxxx.o(.text*) /* SystemInit() - called before relocation to RAM so keep in ROM */
|
|
*sys_config.o(.rodata*)
|
|
. = ALIGN(0x10);
|
|
} >romMirror AT>rom
|
|
|
|
.text : ALIGN(0x10)
|
|
{
|
|
CREATE_OBJECT_SYMBOLS
|
|
__text_load = LOADADDR(.text); /* required when copying to RAM */
|
|
__text_start = .; /* required when copying to RAM */
|
|
*(.text .text.* .gnu.linkonce.t.*)
|
|
*(.plt)
|
|
*(.gnu.warning)
|
|
*(.glue_7t) *(.glue_7) *(.vfp11_veneer)
|
|
|
|
. = ALIGN(4);
|
|
/* These are for running static constructors and destructors under ELF. */
|
|
KEEP (*crtbegin.o(.ctors))
|
|
KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
|
|
KEEP (*(SORT(.ctors.*)))
|
|
KEEP (*crtend.o(.ctors))
|
|
KEEP (*crtbegin.o(.dtors))
|
|
KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
|
|
KEEP (*(SORT(.dtors.*)))
|
|
KEEP (*crtend.o(.dtors))
|
|
|
|
*(.rodata .rodata.* .gnu.linkonce.r.*)
|
|
|
|
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
|
*(.gcc_except_table)
|
|
*(.eh_frame_hdr)
|
|
*(.eh_frame)
|
|
|
|
KEEP (*(.vector_table))
|
|
KEEP (*(.init))
|
|
KEEP (*(.fini))
|
|
|
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
|
KEEP (*(.preinit_array))
|
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
|
PROVIDE_HIDDEN (__init_array_start = .);
|
|
KEEP (*(SORT(.init_array.*)))
|
|
KEEP (*(.init_array))
|
|
PROVIDE_HIDDEN (__init_array_end = .);
|
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
|
KEEP (*(.fini_array))
|
|
KEEP (*(SORT(.fini_array.*)))
|
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
|
. = ALIGN(0x10);
|
|
} >romMirror AT>rom
|
|
|
|
/* .ARM.exidx is sorted, so has to go in its own output section. */
|
|
__exidx_start = .;
|
|
.ARM.exidx :
|
|
{
|
|
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
|
} >ram AT>rom
|
|
__exidx_end = .;
|
|
_etext = .; /* required when copying to RAM */
|
|
|
|
.data : ALIGN(0x10)
|
|
{
|
|
__data_load = LOADADDR(.data); /* used when copying to RAM */
|
|
_sidata = LOADADDR (.data);
|
|
__data_start = .; /* used when copying to RAM */
|
|
_sdata = .;
|
|
KEEP(*(.jcr))
|
|
*(.got.plt) *(.got)
|
|
*(.shdata)
|
|
*(.data .data.* .gnu.linkonce.d.*)
|
|
. = ALIGN (0x10);
|
|
_edata = .; /* used when copying to RAM */
|
|
} >ram AT>rom
|
|
|
|
.bss : ALIGN(0x10)
|
|
{
|
|
__bss_start__ = . ;
|
|
_sbss = .;
|
|
*(.shbss)
|
|
*(.bss .bss.* .gnu.linkonce.b.*)
|
|
*(COMMON)
|
|
. = ALIGN(0x10);
|
|
__bss_end__ = .;
|
|
_end = .;
|
|
__end = _end;
|
|
_ebss = .;
|
|
PROVIDE(end = .);
|
|
} >ram AT>rom
|
|
|
|
.heap : ALIGN(0x10)
|
|
{
|
|
__heap_start__ = .;
|
|
. += MIN_SIZE_HEAP; /* will generate error if this minimum size not available */
|
|
. += ((ABSOLUTE(RAM_START_ADDRESS) + RAM_SIZE - MAIN_STACK_SIZE) - .); /* assumes stack starts after heap */
|
|
_eheap = .;
|
|
} >ram
|
|
|
|
.stack : ALIGN(0x10)
|
|
{
|
|
__stack_start__ = .;
|
|
. += MAIN_STACK_SIZE;
|
|
_estack = .;
|
|
} >ram
|
|
|
|
.stab 0 (NOLOAD) :
|
|
{
|
|
*(.stab)
|
|
}
|
|
|
|
.stabstr 0 (NOLOAD) :
|
|
{
|
|
*(.stabstr)
|
|
}
|
|
/* DWARF debug sections.
|
|
Symbols in the DWARF debugging sections are relative to the beginning
|
|
of the section so we begin them at 0. */
|
|
/* DWARF 1 */
|
|
.debug 0 : { *(.debug) }
|
|
.line 0 : { *(.line) }
|
|
/* GNU DWARF 1 extensions */
|
|
.debug_srcinfo 0 : { *(.debug_srcinfo) }
|
|
.debug_sfnames 0 : { *(.debug_sfnames) }
|
|
/* DWARF 1.1 and DWARF 2 */
|
|
.debug_aranges 0 : { *(.debug_aranges) }
|
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
|
/* DWARF 2 */
|
|
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
|
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
|
.debug_line 0 : { *(.debug_line) }
|
|
.debug_frame 0 : { *(.debug_frame) }
|
|
.debug_str 0 : { *(.debug_str) }
|
|
.debug_loc 0 : { *(.debug_loc) }
|
|
.debug_macinfo 0 : { *(.debug_macinfo) }
|
|
/* SGI/MIPS DWARF 2 extensions */
|
|
.debug_weaknames 0 : { *(.debug_weaknames) }
|
|
.debug_funcnames 0 : { *(.debug_funcnames) }
|
|
.debug_typenames 0 : { *(.debug_typenames) }
|
|
.debug_varnames 0 : { *(.debug_varnames) }
|
|
.note.gnu.arm.ident 0 : { KEEP (*(.note.gnu.arm.ident)) }
|
|
.ARM.attributes 0 : { KEEP (*(.ARM.attributes)) }
|
|
/DISCARD/ : { *(.note.GNU-stack) }
|
|
}
|