352 lines
12 KiB
C
352 lines
12 KiB
C
/*
|
|
* The Clear BSD License
|
|
* Copyright (c) 2017, NXP
|
|
* All rights reserved.
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted (subject to the limitations in the disclaimer below) provided
|
|
* that the following conditions are met:
|
|
*
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
|
* of conditions and the following disclaimer.
|
|
*
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
|
* other materials provided with the distribution.
|
|
*
|
|
* o Neither the name of copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "fsl_dcdc.h"
|
|
|
|
/* Component ID definition, used by tools. */
|
|
#ifndef FSL_COMPONENT_ID
|
|
#define FSL_COMPONENT_ID "platform.drivers.dcdc_1"
|
|
#endif
|
|
|
|
|
|
/*******************************************************************************
|
|
* Prototypes
|
|
******************************************************************************/
|
|
/*!
|
|
* @brief Get instance number for DCDC module.
|
|
*
|
|
* @param base DCDC peripheral base address
|
|
*/
|
|
static uint32_t DCDC_GetInstance(DCDC_Type *base);
|
|
|
|
/*******************************************************************************
|
|
* Variables
|
|
******************************************************************************/
|
|
/*! @brief Pointers to DCDC bases for each instance. */
|
|
static DCDC_Type *const s_dcdcBases[] = DCDC_BASE_PTRS;
|
|
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/*! @brief Pointers to DCDC clocks for each instance. */
|
|
static const clock_ip_name_t s_dcdcClocks[] = DCDC_CLOCKS;
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
|
|
/*******************************************************************************
|
|
* Code
|
|
******************************************************************************/
|
|
static uint32_t DCDC_GetInstance(DCDC_Type *base)
|
|
{
|
|
uint32_t instance;
|
|
|
|
/* Find the instance index from base address mappings. */
|
|
for (instance = 0; instance < ARRAY_SIZE(s_dcdcBases); instance++)
|
|
{
|
|
if (s_dcdcBases[instance] == base)
|
|
{
|
|
break;
|
|
}
|
|
}
|
|
|
|
assert(instance < ARRAY_SIZE(s_dcdcBases));
|
|
|
|
return instance;
|
|
}
|
|
|
|
void DCDC_Init(DCDC_Type *base)
|
|
{
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/* Enable the clock. */
|
|
CLOCK_EnableClock(s_dcdcClocks[DCDC_GetInstance(base)]);
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
}
|
|
|
|
void DCDC_Deinit(DCDC_Type *base)
|
|
{
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/* Disable the clock. */
|
|
CLOCK_DisableClock(s_dcdcClocks[DCDC_GetInstance(base)]);
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
}
|
|
|
|
void DCDC_SetClockSource(DCDC_Type *base, dcdc_clock_source_t clockSource)
|
|
{
|
|
uint32_t tmp32;
|
|
|
|
/* Configure the DCDC_REG0 register. */
|
|
tmp32 = base->REG0 &
|
|
~(DCDC_REG0_XTAL_24M_OK_MASK | DCDC_REG0_DISABLE_AUTO_CLK_SWITCH_MASK | DCDC_REG0_SEL_CLK_MASK |
|
|
DCDC_REG0_PWD_OSC_INT_MASK);
|
|
switch (clockSource)
|
|
{
|
|
case kDCDC_ClockInternalOsc:
|
|
tmp32 |= DCDC_REG0_DISABLE_AUTO_CLK_SWITCH_MASK;
|
|
break;
|
|
case kDCDC_ClockExternalOsc:
|
|
/* Choose the external clock and disable the internal clock. */
|
|
tmp32 |= DCDC_REG0_DISABLE_AUTO_CLK_SWITCH_MASK | DCDC_REG0_SEL_CLK_MASK | DCDC_REG0_PWD_OSC_INT_MASK;
|
|
break;
|
|
case kDCDC_ClockAutoSwitch:
|
|
/* Set to switch from internal ring osc to xtal 24M if auto mode is enabled. */
|
|
tmp32 |= DCDC_REG0_XTAL_24M_OK_MASK;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
base->REG0 = tmp32;
|
|
}
|
|
|
|
void DCDC_GetDefaultDetectionConfig(dcdc_detection_config_t *config)
|
|
{
|
|
assert(NULL != config);
|
|
|
|
config->enableXtalokDetection = false;
|
|
config->powerDownOverVoltageDetection = true;
|
|
config->powerDownLowVlotageDetection = false;
|
|
config->powerDownOverCurrentDetection = true;
|
|
config->powerDownPeakCurrentDetection = true;
|
|
config->powerDownZeroCrossDetection = true;
|
|
config->OverCurrentThreshold = kDCDC_OverCurrentThresholdAlt0;
|
|
config->PeakCurrentThreshold = kDCDC_PeakCurrentThresholdAlt0;
|
|
}
|
|
|
|
void DCDC_SetDetectionConfig(DCDC_Type *base, const dcdc_detection_config_t *config)
|
|
{
|
|
assert(NULL != config);
|
|
|
|
uint32_t tmp32;
|
|
/* Configure the DCDC_REG0 register. */
|
|
tmp32 = base->REG0 &
|
|
~(DCDC_REG0_XTALOK_DISABLE_MASK | DCDC_REG0_PWD_HIGH_VOLT_DET_MASK | DCDC_REG0_PWD_CMP_BATT_DET_MASK |
|
|
DCDC_REG0_PWD_OVERCUR_DET_MASK | DCDC_REG0_PWD_CUR_SNS_CMP_MASK | DCDC_REG0_PWD_ZCD_MASK |
|
|
DCDC_REG0_CUR_SNS_THRSH_MASK | DCDC_REG0_OVERCUR_TRIG_ADJ_MASK);
|
|
|
|
tmp32 |= DCDC_REG0_CUR_SNS_THRSH(config->PeakCurrentThreshold) |
|
|
DCDC_REG0_OVERCUR_TRIG_ADJ(config->OverCurrentThreshold);
|
|
if (false == config->enableXtalokDetection)
|
|
{
|
|
tmp32 |= DCDC_REG0_XTALOK_DISABLE_MASK;
|
|
}
|
|
if (config->powerDownOverVoltageDetection)
|
|
{
|
|
tmp32 |= DCDC_REG0_PWD_HIGH_VOLT_DET_MASK;
|
|
}
|
|
if (config->powerDownLowVlotageDetection)
|
|
{
|
|
tmp32 |= DCDC_REG0_PWD_CMP_BATT_DET_MASK;
|
|
}
|
|
if (config->powerDownOverCurrentDetection)
|
|
{
|
|
tmp32 |= DCDC_REG0_PWD_OVERCUR_DET_MASK;
|
|
}
|
|
if (config->powerDownPeakCurrentDetection)
|
|
{
|
|
tmp32 |= DCDC_REG0_PWD_CUR_SNS_CMP_MASK;
|
|
}
|
|
if (config->powerDownZeroCrossDetection)
|
|
{
|
|
tmp32 |= DCDC_REG0_PWD_ZCD_MASK;
|
|
}
|
|
base->REG0 = tmp32;
|
|
}
|
|
|
|
void DCDC_GetDefaultLowPowerConfig(dcdc_low_power_config_t *config)
|
|
{
|
|
assert(NULL != config);
|
|
|
|
config->enableOverloadDetection = true;
|
|
config->enableAdjustHystereticValue = false;
|
|
config->countChargingTimePeriod = kDCDC_CountChargingTimePeriod8Cycle;
|
|
config->countChargingTimeThreshold = kDCDC_CountChargingTimeThreshold32;
|
|
}
|
|
|
|
void DCDC_SetLowPowerConfig(DCDC_Type *base, const dcdc_low_power_config_t *config)
|
|
{
|
|
assert(NULL != config);
|
|
|
|
uint32_t tmp32;
|
|
/* Configure the DCDC_REG0 register. */
|
|
tmp32 = base->REG0 &
|
|
~(DCDC_REG0_EN_LP_OVERLOAD_SNS_MASK | DCDC_REG0_LP_HIGH_HYS_MASK | DCDC_REG0_LP_OVERLOAD_FREQ_SEL_MASK |
|
|
DCDC_REG0_LP_OVERLOAD_THRSH_MASK);
|
|
tmp32 |= DCDC_REG0_LP_OVERLOAD_FREQ_SEL(config->countChargingTimePeriod) |
|
|
DCDC_REG0_LP_OVERLOAD_THRSH(config->countChargingTimeThreshold);
|
|
if (config->enableOverloadDetection)
|
|
{
|
|
tmp32 |= DCDC_REG0_EN_LP_OVERLOAD_SNS_MASK;
|
|
}
|
|
if (config->enableAdjustHystereticValue)
|
|
{
|
|
tmp32 |= DCDC_REG0_LP_HIGH_HYS_MASK;
|
|
}
|
|
base->REG0 = tmp32;
|
|
}
|
|
|
|
uint32_t DCDC_GetstatusFlags(DCDC_Type *base)
|
|
{
|
|
uint32_t tmp32 = 0U;
|
|
|
|
if (DCDC_REG0_STS_DC_OK_MASK == (DCDC_REG0_STS_DC_OK_MASK & base->REG0))
|
|
{
|
|
tmp32 |= kDCDC_LockedOKStatus;
|
|
}
|
|
|
|
return tmp32;
|
|
}
|
|
|
|
void DCDC_ResetCurrentAlertSignal(DCDC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->REG0 |= DCDC_REG0_CURRENT_ALERT_RESET_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->REG0 &= ~DCDC_REG0_CURRENT_ALERT_RESET_MASK;
|
|
}
|
|
}
|
|
|
|
void DCDC_GetDefaultLoopControlConfig(dcdc_loop_control_config_t *config)
|
|
{
|
|
assert(NULL != config);
|
|
|
|
config->enableCommonHysteresis = false;
|
|
config->enableCommonThresholdDetection = false;
|
|
config->enableInvertHysteresisSign = false;
|
|
config->enableRCThresholdDetection = false;
|
|
config->enableRCScaleCircuit = 0U;
|
|
config->complementFeedForwardStep = 0U;
|
|
config->controlParameterMagnitude = 2U;
|
|
config->integralProportionalRatio = 2U;
|
|
}
|
|
|
|
void DCDC_SetLoopControlConfig(DCDC_Type *base, const dcdc_loop_control_config_t *config)
|
|
{
|
|
assert(NULL != config);
|
|
|
|
uint32_t tmp32;
|
|
|
|
/* Configure the DCDC_REG1 register. */
|
|
tmp32 = base->REG1 & ~(DCDC_REG1_LOOPCTRL_EN_HYST_MASK | DCDC_REG1_LOOPCTRL_HST_THRESH_MASK);
|
|
if (config->enableCommonHysteresis)
|
|
{
|
|
tmp32 |= DCDC_REG1_LOOPCTRL_EN_HYST_MASK;
|
|
}
|
|
if (config->enableCommonThresholdDetection)
|
|
{
|
|
tmp32 |= DCDC_REG1_LOOPCTRL_HST_THRESH_MASK;
|
|
}
|
|
base->REG1 = tmp32;
|
|
|
|
/* configure the DCDC_REG2 register. */
|
|
tmp32 = base->REG2 &
|
|
~(DCDC_REG2_LOOPCTRL_HYST_SIGN_MASK | DCDC_REG2_LOOPCTRL_RCSCALE_THRSH_MASK |
|
|
DCDC_REG2_LOOPCTRL_EN_RCSCALE_MASK | DCDC_REG2_LOOPCTRL_DC_FF_MASK | DCDC_REG2_LOOPCTRL_DC_R_MASK |
|
|
DCDC_REG2_LOOPCTRL_DC_C_MASK);
|
|
tmp32 |= DCDC_REG2_LOOPCTRL_DC_FF(config->complementFeedForwardStep) |
|
|
DCDC_REG2_LOOPCTRL_DC_R(config->controlParameterMagnitude) |
|
|
DCDC_REG2_LOOPCTRL_DC_C(config->integralProportionalRatio) |
|
|
DCDC_REG2_LOOPCTRL_EN_RCSCALE(config->enableRCScaleCircuit);
|
|
if (config->enableInvertHysteresisSign)
|
|
{
|
|
tmp32 |= DCDC_REG2_LOOPCTRL_HYST_SIGN_MASK;
|
|
}
|
|
if (config->enableRCThresholdDetection)
|
|
{
|
|
tmp32 |= DCDC_REG2_LOOPCTRL_RCSCALE_THRSH_MASK;
|
|
}
|
|
base->REG2 = tmp32;
|
|
}
|
|
|
|
void DCDC_SetMinPowerConfig(DCDC_Type *base, const dcdc_min_power_config_t *config)
|
|
{
|
|
assert(NULL != config);
|
|
|
|
uint32_t tmp32;
|
|
|
|
tmp32 = base->REG3 & ~DCDC_REG3_MINPWR_DC_HALFCLK_MASK;
|
|
if (config->enableUseHalfFreqForContinuous)
|
|
{
|
|
tmp32 |= DCDC_REG3_MINPWR_DC_HALFCLK_MASK;
|
|
}
|
|
base->REG3 = tmp32;
|
|
}
|
|
|
|
void DCDC_AdjustTargetVoltage(DCDC_Type *base, uint32_t VDDRun, uint32_t VDDStandby)
|
|
{
|
|
uint32_t tmp32;
|
|
|
|
/* Unlock the step for the output. */
|
|
base->REG3 &= ~DCDC_REG3_DISABLE_STEP_MASK;
|
|
|
|
/* Configure the DCDC_REG3 register. */
|
|
tmp32 = base->REG3 & ~(DCDC_REG3_TARGET_LP_MASK | DCDC_REG3_TRG_MASK);
|
|
|
|
tmp32 |= DCDC_REG3_TARGET_LP(VDDStandby) | DCDC_REG3_TRG(VDDRun);
|
|
base->REG3 = tmp32;
|
|
|
|
/* DCDC_STS_DC_OK bit will be de-asserted after target register changes. After output voltage settling to new
|
|
* target value, DCDC_STS_DC_OK will be asserted. */
|
|
while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & base->REG0))
|
|
{
|
|
}
|
|
}
|
|
|
|
void DCDC_SetInternalRegulatorConfig(DCDC_Type *base, const dcdc_internal_regulator_config_t *config)
|
|
{
|
|
assert(NULL != config);
|
|
|
|
uint32_t tmp32;
|
|
|
|
/* Configure the DCDC_REG1 register. */
|
|
tmp32 = base->REG1 & ~(DCDC_REG1_REG_FBK_SEL_MASK | DCDC_REG1_REG_RLOAD_SW_MASK);
|
|
tmp32 |= DCDC_REG1_REG_FBK_SEL(config->feedbackPoint);
|
|
if (config->enableLoadResistor)
|
|
{
|
|
tmp32 |= DCDC_REG1_REG_RLOAD_SW_MASK;
|
|
}
|
|
base->REG1 = tmp32;
|
|
}
|
|
|
|
void DCDC_BootIntoDCM(DCDC_Type *base)
|
|
{
|
|
base->REG0 &= ~(DCDC_REG0_PWD_ZCD_MASK | DCDC_REG0_PWD_CMP_OFFSET_MASK);
|
|
base->REG2 = (~DCDC_REG2_LOOPCTRL_EN_RCSCALE_MASK & base->REG2) | DCDC_REG2_LOOPCTRL_EN_RCSCALE(0x4U) |
|
|
DCDC_REG2_DCM_SET_CTRL_MASK;
|
|
}
|
|
|
|
void DCDC_BootIntoCCM(DCDC_Type *base)
|
|
{
|
|
base->REG0 = (~DCDC_REG0_PWD_CMP_OFFSET_MASK & base->REG0) | DCDC_REG0_PWD_ZCD_MASK;
|
|
base->REG2 = (~DCDC_REG2_LOOPCTRL_EN_RCSCALE_MASK & base->REG2) | DCDC_REG2_LOOPCTRL_EN_RCSCALE(0x3U);
|
|
}
|