rt-thread/bsp/imxrt/libraries/MIMXRT1060/CMSIS/Driver/DriverTemplates/Driver_SPI.c

152 lines
3.5 KiB
C

/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_SPI.h"
#define ARM_SPI_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION DriverVersion = {
ARM_SPI_API_VERSION,
ARM_SPI_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_SPI_CAPABILITIES DriverCapabilities = {
1, /* Simplex Mode (Master and Slave) */
1, /* TI Synchronous Serial Interface */
1, /* Microwire Interface */
0 /* Signal Mode Fault event: \ref ARM_SPI_EVENT_MODE_FAULT */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_SPI_GetVersion(void)
{
}
ARM_SPI_CAPABILITIES ARM_SPI_GetCapabilities(void)
{
}
int32_t ARM_SPI_Initialize(ARM_SPI_SignalEvent_t cb_event)
{
}
int32_t ARM_SPI_Uninitialize(void)
{
}
int32_t ARM_SPI_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_SPI_Send(const void *data, uint32_t num)
{
}
int32_t ARM_SPI_Receive(void *data, uint32_t num)
{
}
int32_t ARM_SPI_Transfer(const void *data_out, void *data_in, uint32_t num)
{
}
uint32_t ARM_SPI_GetDataCount(void)
{
}
int32_t ARM_SPI_Control(uint32_t control, uint32_t arg)
{
switch (control & ARM_SPI_CONTROL_Msk)
{
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
case ARM_SPI_MODE_INACTIVE: // SPI Inactive
return ARM_DRIVER_OK;
case ARM_SPI_MODE_MASTER: // SPI Master (Output on MOSI, Input on MISO); arg = Bus Speed in bps
break;
case ARM_SPI_MODE_SLAVE: // SPI Slave (Output on MISO, Input on MOSI)
break;
case ARM_SPI_MODE_MASTER_SIMPLEX: // SPI Master (Output/Input on MOSI); arg = Bus Speed in bps
case ARM_SPI_MODE_SLAVE_SIMPLEX: // SPI Slave (Output/Input on MISO)
return ARM_SPI_ERROR_MODE;
case ARM_SPI_SET_BUS_SPEED: // Set Bus Speed in bps; arg = value
break;
case ARM_SPI_GET_BUS_SPEED: // Get Bus Speed in bps
break;
case ARM_SPI_SET_DEFAULT_TX_VALUE: // Set default Transmit value; arg = value
break;
case ARM_SPI_CONTROL_SS: // Control Slave Select; arg = 0:inactive, 1:active
break;
case ARM_SPI_ABORT_TRANSFER: // Abort current data transfer
break;
}
}
ARM_SPI_STATUS ARM_SPI_GetStatus(void)
{
}
void ARM_SPI_SignalEvent(uint32_t event)
{
// function body
}
// End SPI Interface
ARM_DRIVER_SPI Driver_SPI = {
ARM_SPI_GetVersion,
ARM_SPI_GetCapabilities,
ARM_SPI_Initialize,
ARM_SPI_Uninitialize,
ARM_SPI_PowerControl,
ARM_SPI_Send,
ARM_SPI_Receive,
ARM_SPI_Transfer,
ARM_SPI_GetDataCount,
ARM_SPI_Control,
ARM_SPI_GetStatus
};