rt-thread/bsp/imxrt1052-evk/Libraries/drivers/fsl_flexio_i2s_edma.h

230 lines
10 KiB
C

/*
* The Clear BSD License
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted (subject to the limitations in the disclaimer below) provided
* that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_FLEXIO_I2S_EDMA_H_
#define _FSL_FLEXIO_I2S_EDMA_H_
#include "fsl_flexio_i2s.h"
#include "fsl_edma.h"
/*!
* @addtogroup flexio_edma_i2s
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief FlexIO I2S EDMA driver version 2.1.4. */
#define FSL_FLEXIO_I2S_EDMA_DRIVER_VERSION (MAKE_VERSION(2, 1, 4))
/*@}*/
typedef struct _flexio_i2s_edma_handle flexio_i2s_edma_handle_t;
/*! @brief FlexIO I2S eDMA transfer callback function for finish and error */
typedef void (*flexio_i2s_edma_callback_t)(FLEXIO_I2S_Type *base,
flexio_i2s_edma_handle_t *handle,
status_t status,
void *userData);
/*! @brief FlexIO I2S DMA transfer handle, users should not touch the content of the handle.*/
struct _flexio_i2s_edma_handle
{
edma_handle_t *dmaHandle; /*!< DMA handler for FlexIO I2S send */
uint8_t bytesPerFrame; /*!< Bytes in a frame */
uint8_t nbytes; /*!< eDMA minor byte transfer count initially configured. */
uint32_t state; /*!< Internal state for FlexIO I2S eDMA transfer */
flexio_i2s_edma_callback_t callback; /*!< Callback for users while transfer finish or error occurred */
void *userData; /*!< User callback parameter */
edma_tcd_t tcd[FLEXIO_I2S_XFER_QUEUE_SIZE + 1U]; /*!< TCD pool for eDMA transfer. */
flexio_i2s_transfer_t queue[FLEXIO_I2S_XFER_QUEUE_SIZE]; /*!< Transfer queue storing queued transfer. */
size_t transferSize[FLEXIO_I2S_XFER_QUEUE_SIZE]; /*!< Data bytes need to transfer */
volatile uint8_t queueUser; /*!< Index for user to queue transfer. */
volatile uint8_t queueDriver; /*!< Index for driver to get the transfer data and size */
};
/*******************************************************************************
* APIs
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @name eDMA Transactional
* @{
*/
/*!
* @brief Initializes the FlexIO I2S eDMA handle.
*
* This function initializes the FlexIO I2S master DMA handle which can be used for other FlexIO I2S master
* transactional APIs.
* Usually, for a specified FlexIO I2S instance, call this API once to get the initialized handle.
*
* @param base FlexIO I2S peripheral base address.
* @param handle FlexIO I2S eDMA handle pointer.
* @param callback FlexIO I2S eDMA callback function called while finished a block.
* @param userData User parameter for callback.
* @param dmaHandle eDMA handle for FlexIO I2S. This handle is a static value allocated by users.
*/
void FLEXIO_I2S_TransferTxCreateHandleEDMA(FLEXIO_I2S_Type *base,
flexio_i2s_edma_handle_t *handle,
flexio_i2s_edma_callback_t callback,
void *userData,
edma_handle_t *dmaHandle);
/*!
* @brief Initializes the FlexIO I2S Rx eDMA handle.
*
* This function initializes the FlexIO I2S slave DMA handle which can be used for other FlexIO I2S master transactional
* APIs.
* Usually, for a specified FlexIO I2S instance, call this API once to get the initialized handle.
*
* @param base FlexIO I2S peripheral base address.
* @param handle FlexIO I2S eDMA handle pointer.
* @param callback FlexIO I2S eDMA callback function called while finished a block.
* @param userData User parameter for callback.
* @param dmaHandle eDMA handle for FlexIO I2S. This handle is a static value allocated by users.
*/
void FLEXIO_I2S_TransferRxCreateHandleEDMA(FLEXIO_I2S_Type *base,
flexio_i2s_edma_handle_t *handle,
flexio_i2s_edma_callback_t callback,
void *userData,
edma_handle_t *dmaHandle);
/*!
* @brief Configures the FlexIO I2S Tx audio format.
*
* Audio format can be changed in run-time of FlexIO I2S. This function configures the sample rate and audio data
* format to be transferred. This function also sets the eDMA parameter according to format.
*
* @param base FlexIO I2S peripheral base address.
* @param handle FlexIO I2S eDMA handle pointer
* @param format Pointer to FlexIO I2S audio data format structure.
* @param srcClock_Hz FlexIO I2S clock source frequency in Hz, it should be 0 while in slave mode.
* @retval kStatus_Success Audio format set successfully.
* @retval kStatus_InvalidArgument The input arguments is invalid.
*/
void FLEXIO_I2S_TransferSetFormatEDMA(FLEXIO_I2S_Type *base,
flexio_i2s_edma_handle_t *handle,
flexio_i2s_format_t *format,
uint32_t srcClock_Hz);
/*!
* @brief Performs a non-blocking FlexIO I2S transfer using DMA.
*
* @note This interface returned immediately after transfer initiates. Users should call
* FLEXIO_I2S_GetTransferStatus to poll the transfer status and check whether the FlexIO I2S transfer is finished.
*
* @param base FlexIO I2S peripheral base address.
* @param handle FlexIO I2S DMA handle pointer.
* @param xfer Pointer to DMA transfer structure.
* @retval kStatus_Success Start a FlexIO I2S eDMA send successfully.
* @retval kStatus_InvalidArgument The input arguments is invalid.
* @retval kStatus_TxBusy FlexIO I2S is busy sending data.
*/
status_t FLEXIO_I2S_TransferSendEDMA(FLEXIO_I2S_Type *base,
flexio_i2s_edma_handle_t *handle,
flexio_i2s_transfer_t *xfer);
/*!
* @brief Performs a non-blocking FlexIO I2S receive using eDMA.
*
* @note This interface returned immediately after transfer initiates. Users should call
* FLEXIO_I2S_GetReceiveRemainingBytes to poll the transfer status and check whether the FlexIO I2S transfer is
* finished.
*
* @param base FlexIO I2S peripheral base address.
* @param handle FlexIO I2S DMA handle pointer.
* @param xfer Pointer to DMA transfer structure.
* @retval kStatus_Success Start a FlexIO I2S eDMA receive successfully.
* @retval kStatus_InvalidArgument The input arguments is invalid.
* @retval kStatus_RxBusy FlexIO I2S is busy receiving data.
*/
status_t FLEXIO_I2S_TransferReceiveEDMA(FLEXIO_I2S_Type *base,
flexio_i2s_edma_handle_t *handle,
flexio_i2s_transfer_t *xfer);
/*!
* @brief Aborts a FlexIO I2S transfer using eDMA.
*
* @param base FlexIO I2S peripheral base address.
* @param handle FlexIO I2S DMA handle pointer.
*/
void FLEXIO_I2S_TransferAbortSendEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle);
/*!
* @brief Aborts a FlexIO I2S receive using eDMA.
*
* @param base FlexIO I2S peripheral base address.
* @param handle FlexIO I2S DMA handle pointer.
*/
void FLEXIO_I2S_TransferAbortReceiveEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle);
/*!
* @brief Gets the remaining bytes to be sent.
*
* @param base FlexIO I2S peripheral base address.
* @param handle FlexIO I2S DMA handle pointer.
* @param count Bytes sent.
* @retval kStatus_Success Succeed get the transfer count.
* @retval kStatus_NoTransferInProgress There is not a non-blocking transaction currently in progress.
*/
status_t FLEXIO_I2S_TransferGetSendCountEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, size_t *count);
/*!
* @brief Get the remaining bytes to be received.
*
* @param base FlexIO I2S peripheral base address.
* @param handle FlexIO I2S DMA handle pointer.
* @param count Bytes received.
* @retval kStatus_Success Succeed get the transfer count.
* @retval kStatus_NoTransferInProgress There is not a non-blocking transaction currently in progress.
*/
status_t FLEXIO_I2S_TransferGetReceiveCountEDMA(FLEXIO_I2S_Type *base, flexio_i2s_edma_handle_t *handle, size_t *count);
/*! @} */
#if defined(__cplusplus)
}
#endif
/*!
* @}
*/
#endif