rt-thread/bsp/imxrt1052-evk/Libraries/drivers/fsl_flexio_i2s.h

575 lines
22 KiB
C

/*
* The Clear BSD License
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted (subject to the limitations in the disclaimer below) provided
* that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_FLEXIO_I2S_H_
#define _FSL_FLEXIO_I2S_H_
#include "fsl_common.h"
#include "fsl_flexio.h"
/*!
* @addtogroup flexio_i2s
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief FlexIO I2S driver version 2.1.4. */
#define FSL_FLEXIO_I2S_DRIVER_VERSION (MAKE_VERSION(2, 1, 4))
/*@}*/
/*! @brief FlexIO I2S transfer status */
enum _flexio_i2s_status
{
kStatus_FLEXIO_I2S_Idle = MAKE_STATUS(kStatusGroup_FLEXIO_I2S, 0), /*!< FlexIO I2S is in idle state */
kStatus_FLEXIO_I2S_TxBusy = MAKE_STATUS(kStatusGroup_FLEXIO_I2S, 1), /*!< FlexIO I2S Tx is busy */
kStatus_FLEXIO_I2S_RxBusy = MAKE_STATUS(kStatusGroup_FLEXIO_I2S, 2), /*!< FlexIO I2S Tx is busy */
kStatus_FLEXIO_I2S_Error = MAKE_STATUS(kStatusGroup_FLEXIO_I2S, 3), /*!< FlexIO I2S error occurred */
kStatus_FLEXIO_I2S_QueueFull = MAKE_STATUS(kStatusGroup_FLEXIO_I2S, 4), /*!< FlexIO I2S transfer queue is full. */
};
/*! @brief Define FlexIO I2S access structure typedef */
typedef struct _flexio_i2s_type
{
FLEXIO_Type *flexioBase; /*!< FlexIO base pointer */
uint8_t txPinIndex; /*!< Tx data pin index in FlexIO pins */
uint8_t rxPinIndex; /*!< Rx data pin index */
uint8_t bclkPinIndex; /*!< Bit clock pin index */
uint8_t fsPinIndex; /*!< Frame sync pin index */
uint8_t txShifterIndex; /*!< Tx data shifter index */
uint8_t rxShifterIndex; /*!< Rx data shifter index */
uint8_t bclkTimerIndex; /*!< Bit clock timer index */
uint8_t fsTimerIndex; /*!< Frame sync timer index */
} FLEXIO_I2S_Type;
/*! @brief Master or slave mode */
typedef enum _flexio_i2s_master_slave
{
kFLEXIO_I2S_Master = 0x0U, /*!< Master mode */
kFLEXIO_I2S_Slave = 0x1U /*!< Slave mode */
} flexio_i2s_master_slave_t;
/*! @brief Define FlexIO FlexIO I2S interrupt mask. */
enum _flexio_i2s_interrupt_enable
{
kFLEXIO_I2S_TxDataRegEmptyInterruptEnable = 0x1U, /*!< Transmit buffer empty interrupt enable. */
kFLEXIO_I2S_RxDataRegFullInterruptEnable = 0x2U, /*!< Receive buffer full interrupt enable. */
};
/*! @brief Define FlexIO FlexIO I2S status mask. */
enum _flexio_i2s_status_flags
{
kFLEXIO_I2S_TxDataRegEmptyFlag = 0x1U, /*!< Transmit buffer empty flag. */
kFLEXIO_I2S_RxDataRegFullFlag = 0x2U, /*!< Receive buffer full flag. */
};
/*! @brief FlexIO I2S configure structure */
typedef struct _flexio_i2s_config
{
bool enableI2S; /*!< Enable FlexIO I2S */
flexio_i2s_master_slave_t masterSlave; /*!< Master or slave */
flexio_pin_polarity_t txPinPolarity; /*!< Tx data pin polarity, active high or low */
flexio_pin_polarity_t rxPinPolarity; /*!< Rx data pin polarity */
flexio_pin_polarity_t bclkPinPolarity; /*!< Bit clock pin polarity */
flexio_pin_polarity_t fsPinPolarity; /*!< Frame sync pin polarity */
flexio_shifter_timer_polarity_t txTimerPolarity; /*!< Tx data valid on bclk rising or falling edge */
flexio_shifter_timer_polarity_t rxTimerPolarity; /*!< Rx data valid on bclk rising or falling edge */
} flexio_i2s_config_t;
/*! @brief FlexIO I2S audio format, FlexIO I2S only support the same format in Tx and Rx */
typedef struct _flexio_i2s_format
{
uint8_t bitWidth; /*!< Bit width of audio data, always 8/16/24/32 bits */
uint32_t sampleRate_Hz; /*!< Sample rate of the audio data */
} flexio_i2s_format_t;
/*!@brief FlexIO I2S transfer queue size, user can refine it according to use case. */
#define FLEXIO_I2S_XFER_QUEUE_SIZE (4)
/*! @brief Audio sample rate */
typedef enum _flexio_i2s_sample_rate
{
kFLEXIO_I2S_SampleRate8KHz = 8000U, /*!< Sample rate 8000Hz */
kFLEXIO_I2S_SampleRate11025Hz = 11025U, /*!< Sample rate 11025Hz */
kFLEXIO_I2S_SampleRate12KHz = 12000U, /*!< Sample rate 12000Hz */
kFLEXIO_I2S_SampleRate16KHz = 16000U, /*!< Sample rate 16000Hz */
kFLEXIO_I2S_SampleRate22050Hz = 22050U, /*!< Sample rate 22050Hz */
kFLEXIO_I2S_SampleRate24KHz = 24000U, /*!< Sample rate 24000Hz */
kFLEXIO_I2S_SampleRate32KHz = 32000U, /*!< Sample rate 32000Hz */
kFLEXIO_I2S_SampleRate44100Hz = 44100U, /*!< Sample rate 44100Hz */
kFLEXIO_I2S_SampleRate48KHz = 48000U, /*!< Sample rate 48000Hz */
kFLEXIO_I2S_SampleRate96KHz = 96000U /*!< Sample rate 96000Hz */
} flexio_i2s_sample_rate_t;
/*! @brief Audio word width */
typedef enum _flexio_i2s_word_width
{
kFLEXIO_I2S_WordWidth8bits = 8U, /*!< Audio data width 8 bits */
kFLEXIO_I2S_WordWidth16bits = 16U, /*!< Audio data width 16 bits */
kFLEXIO_I2S_WordWidth24bits = 24U, /*!< Audio data width 24 bits */
kFLEXIO_I2S_WordWidth32bits = 32U /*!< Audio data width 32 bits */
} flexio_i2s_word_width_t;
/*! @brief Define FlexIO I2S transfer structure. */
typedef struct _flexio_i2s_transfer
{
uint8_t *data; /*!< Data buffer start pointer */
size_t dataSize; /*!< Bytes to be transferred. */
} flexio_i2s_transfer_t;
typedef struct _flexio_i2s_handle flexio_i2s_handle_t;
/*! @brief FlexIO I2S xfer callback prototype */
typedef void (*flexio_i2s_callback_t)(FLEXIO_I2S_Type *base,
flexio_i2s_handle_t *handle,
status_t status,
void *userData);
/*! @brief Define FlexIO I2S handle structure. */
struct _flexio_i2s_handle
{
uint32_t state; /*!< Internal state */
flexio_i2s_callback_t callback; /*!< Callback function called at transfer event*/
void *userData; /*!< Callback parameter passed to callback function*/
uint8_t bitWidth; /*!< Bit width for transfer, 8/16/24/32bits */
flexio_i2s_transfer_t queue[FLEXIO_I2S_XFER_QUEUE_SIZE]; /*!< Transfer queue storing queued transfer */
size_t transferSize[FLEXIO_I2S_XFER_QUEUE_SIZE]; /*!< Data bytes need to transfer */
volatile uint8_t queueUser; /*!< Index for user to queue transfer */
volatile uint8_t queueDriver; /*!< Index for driver to get the transfer data and size */
};
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /*_cplusplus*/
/*!
* @name Initialization and deinitialization
* @{
*/
/*!
* @brief Initializes the FlexIO I2S.
*
* This API configures FlexIO pins and shifter to I2S and configures the FlexIO I2S with a configuration structure.
* The configuration structure can be filled by the user, or be set with default values by
* FLEXIO_I2S_GetDefaultConfig().
*
* @note This API should be called at the beginning of the application to use
* the FlexIO I2S driver. Otherwise, any access to the FlexIO I2S module can cause hard fault
* because the clock is not enabled.
*
* @param base FlexIO I2S base pointer
* @param config FlexIO I2S configure structure.
*/
void FLEXIO_I2S_Init(FLEXIO_I2S_Type *base, const flexio_i2s_config_t *config);
/*!
* @brief Sets the FlexIO I2S configuration structure to default values.
*
* The purpose of this API is to get the configuration structure initialized for use in FLEXIO_I2S_Init().
* Users may use the initialized structure unchanged in FLEXIO_I2S_Init() or modify
* some fields of the structure before calling FLEXIO_I2S_Init().
*
* @param config pointer to master configuration structure
*/
void FLEXIO_I2S_GetDefaultConfig(flexio_i2s_config_t *config);
/*!
* @brief De-initializes the FlexIO I2S.
*
* Calling this API resets the FlexIO I2S shifter and timer config. After calling this API,
* call the FLEXO_I2S_Init to use the FlexIO I2S module.
*
* @param base FlexIO I2S base pointer
*/
void FLEXIO_I2S_Deinit(FLEXIO_I2S_Type *base);
/*!
* @brief Enables/disables the FlexIO I2S module operation.
*
* @param base Pointer to FLEXIO_I2S_Type
* @param enable True to enable, false dose not have any effect.
*/
static inline void FLEXIO_I2S_Enable(FLEXIO_I2S_Type *base, bool enable)
{
if (enable)
{
base->flexioBase->CTRL |= FLEXIO_CTRL_FLEXEN_MASK;
}
}
/*! @} */
/*!
* @name Status
* @{
*/
/*!
* @brief Gets the FlexIO I2S status flags.
*
* @param base Pointer to FLEXIO_I2S_Type structure
* @return Status flag, which are ORed by the enumerators in the _flexio_i2s_status_flags.
*/
uint32_t FLEXIO_I2S_GetStatusFlags(FLEXIO_I2S_Type *base);
/*! @} */
/*!
* @name Interrupts
* @{
*/
/*!
* @brief Enables the FlexIO I2S interrupt.
*
* This function enables the FlexIO UART interrupt.
*
* @param base Pointer to FLEXIO_I2S_Type structure
* @param mask interrupt source
*/
void FLEXIO_I2S_EnableInterrupts(FLEXIO_I2S_Type *base, uint32_t mask);
/*!
* @brief Disables the FlexIO I2S interrupt.
*
* This function enables the FlexIO UART interrupt.
*
* @param base pointer to FLEXIO_I2S_Type structure
* @param mask interrupt source
*/
void FLEXIO_I2S_DisableInterrupts(FLEXIO_I2S_Type *base, uint32_t mask);
/*! @} */
/*!
* @name DMA Control
* @{
*/
/*!
* @brief Enables/disables the FlexIO I2S Tx DMA requests.
*
* @param base FlexIO I2S base pointer
* @param enable True means enable DMA, false means disable DMA.
*/
static inline void FLEXIO_I2S_TxEnableDMA(FLEXIO_I2S_Type *base, bool enable)
{
FLEXIO_EnableShifterStatusDMA(base->flexioBase, 1 << base->txShifterIndex, enable);
}
/*!
* @brief Enables/disables the FlexIO I2S Rx DMA requests.
*
* @param base FlexIO I2S base pointer
* @param enable True means enable DMA, false means disable DMA.
*/
static inline void FLEXIO_I2S_RxEnableDMA(FLEXIO_I2S_Type *base, bool enable)
{
FLEXIO_EnableShifterStatusDMA(base->flexioBase, 1 << base->rxShifterIndex, enable);
}
/*!
* @brief Gets the FlexIO I2S send data register address.
*
* This function returns the I2S data register address, mainly used by DMA/eDMA.
*
* @param base Pointer to FLEXIO_I2S_Type structure
* @return FlexIO i2s send data register address.
*/
static inline uint32_t FLEXIO_I2S_TxGetDataRegisterAddress(FLEXIO_I2S_Type *base)
{
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBufferBitSwapped, base->txShifterIndex);
}
/*!
* @brief Gets the FlexIO I2S receive data register address.
*
* This function returns the I2S data register address, mainly used by DMA/eDMA.
*
* @param base Pointer to FLEXIO_I2S_Type structure
* @return FlexIO i2s receive data register address.
*/
static inline uint32_t FLEXIO_I2S_RxGetDataRegisterAddress(FLEXIO_I2S_Type *base)
{
return FLEXIO_GetShifterBufferAddress(base->flexioBase, kFLEXIO_ShifterBufferBitSwapped, base->rxShifterIndex);
}
/*! @} */
/*!
* @name Bus Operations
* @{
*/
/*!
* @brief Configures the FlexIO I2S audio format in master mode.
*
* Audio format can be changed in run-time of FlexIO I2S. This function configures the sample rate and audio data
* format to be transferred.
*
* @param base Pointer to FLEXIO_I2S_Type structure
* @param format Pointer to FlexIO I2S audio data format structure.
* @param srcClock_Hz I2S master clock source frequency in Hz.
*/
void FLEXIO_I2S_MasterSetFormat(FLEXIO_I2S_Type *base, flexio_i2s_format_t *format, uint32_t srcClock_Hz);
/*!
* @brief Configures the FlexIO I2S audio format in slave mode.
*
* Audio format can be changed in run-time of FlexIO I2S. This function configures the sample rate and audio data
* format to be transferred.
*
* @param base Pointer to FLEXIO_I2S_Type structure
* @param format Pointer to FlexIO I2S audio data format structure.
*/
void FLEXIO_I2S_SlaveSetFormat(FLEXIO_I2S_Type *base, flexio_i2s_format_t *format);
/*!
* @brief Sends data using a blocking method.
*
* @note This function blocks via polling until data is ready to be sent.
*
* @param base FlexIO I2S base pointer.
* @param bitWidth How many bits in a audio word, usually 8/16/24/32 bits.
* @param txData Pointer to the data to be written.
* @param size Bytes to be written.
*/
void FLEXIO_I2S_WriteBlocking(FLEXIO_I2S_Type *base, uint8_t bitWidth, uint8_t *txData, size_t size);
/*!
* @brief Writes data into a data register.
*
* @param base FlexIO I2S base pointer.
* @param bitWidth How many bits in a audio word, usually 8/16/24/32 bits.
* @param data Data to be written.
*/
static inline void FLEXIO_I2S_WriteData(FLEXIO_I2S_Type *base, uint8_t bitWidth, uint32_t data)
{
base->flexioBase->SHIFTBUFBIS[base->txShifterIndex] = (data << (32U - bitWidth));
}
/*!
* @brief Receives a piece of data using a blocking method.
*
* @note This function blocks via polling until data is ready to be sent.
*
* @param base FlexIO I2S base pointer
* @param bitWidth How many bits in a audio word, usually 8/16/24/32 bits.
* @param rxData Pointer to the data to be read.
* @param size Bytes to be read.
*/
void FLEXIO_I2S_ReadBlocking(FLEXIO_I2S_Type *base, uint8_t bitWidth, uint8_t *rxData, size_t size);
/*!
* @brief Reads a data from the data register.
*
* @param base FlexIO I2S base pointer
* @return Data read from data register.
*/
static inline uint32_t FLEXIO_I2S_ReadData(FLEXIO_I2S_Type *base)
{
return base->flexioBase->SHIFTBUFBIS[base->rxShifterIndex];
}
/*! @} */
/*!
* @name Transactional
* @{
*/
/*!
* @brief Initializes the FlexIO I2S handle.
*
* This function initializes the FlexIO I2S handle which can be used for other
* FlexIO I2S transactional APIs. Call this API once to get the
* initialized handle.
*
* @param base Pointer to FLEXIO_I2S_Type structure
* @param handle Pointer to flexio_i2s_handle_t structure to store the transfer state.
* @param callback FlexIO I2S callback function, which is called while finished a block.
* @param userData User parameter for the FlexIO I2S callback.
*/
void FLEXIO_I2S_TransferTxCreateHandle(FLEXIO_I2S_Type *base,
flexio_i2s_handle_t *handle,
flexio_i2s_callback_t callback,
void *userData);
/*!
* @brief Configures the FlexIO I2S audio format.
*
* Audio format can be changed at run-time of FlexIO I2S. This function configures the sample rate and audio data
* format to be transferred.
*
* @param base Pointer to FLEXIO_I2S_Type structure.
* @param handle FlexIO I2S handle pointer.
* @param format Pointer to audio data format structure.
* @param srcClock_Hz FlexIO I2S bit clock source frequency in Hz. This parameter should be 0 while in slave mode.
*/
void FLEXIO_I2S_TransferSetFormat(FLEXIO_I2S_Type *base,
flexio_i2s_handle_t *handle,
flexio_i2s_format_t *format,
uint32_t srcClock_Hz);
/*!
* @brief Initializes the FlexIO I2S receive handle.
*
* This function initializes the FlexIO I2S handle which can be used for other
* FlexIO I2S transactional APIs. Call this API once to get the
* initialized handle.
*
* @param base Pointer to FLEXIO_I2S_Type structure.
* @param handle Pointer to flexio_i2s_handle_t structure to store the transfer state.
* @param callback FlexIO I2S callback function, which is called while finished a block.
* @param userData User parameter for the FlexIO I2S callback.
*/
void FLEXIO_I2S_TransferRxCreateHandle(FLEXIO_I2S_Type *base,
flexio_i2s_handle_t *handle,
flexio_i2s_callback_t callback,
void *userData);
/*!
* @brief Performs an interrupt non-blocking send transfer on FlexIO I2S.
*
* @note The API returns immediately after transfer initiates.
* Call FLEXIO_I2S_GetRemainingBytes to poll the transfer status and check whether
* the transfer is finished. If the return status is 0, the transfer is finished.
*
* @param base Pointer to FLEXIO_I2S_Type structure.
* @param handle Pointer to flexio_i2s_handle_t structure which stores the transfer state
* @param xfer Pointer to flexio_i2s_transfer_t structure
* @retval kStatus_Success Successfully start the data transmission.
* @retval kStatus_FLEXIO_I2S_TxBusy Previous transmission still not finished, data not all written to TX register yet.
* @retval kStatus_InvalidArgument The input parameter is invalid.
*/
status_t FLEXIO_I2S_TransferSendNonBlocking(FLEXIO_I2S_Type *base,
flexio_i2s_handle_t *handle,
flexio_i2s_transfer_t *xfer);
/*!
* @brief Performs an interrupt non-blocking receive transfer on FlexIO I2S.
*
* @note The API returns immediately after transfer initiates.
* Call FLEXIO_I2S_GetRemainingBytes to poll the transfer status to check whether
* the transfer is finished. If the return status is 0, the transfer is finished.
*
* @param base Pointer to FLEXIO_I2S_Type structure.
* @param handle Pointer to flexio_i2s_handle_t structure which stores the transfer state
* @param xfer Pointer to flexio_i2s_transfer_t structure
* @retval kStatus_Success Successfully start the data receive.
* @retval kStatus_FLEXIO_I2S_RxBusy Previous receive still not finished.
* @retval kStatus_InvalidArgument The input parameter is invalid.
*/
status_t FLEXIO_I2S_TransferReceiveNonBlocking(FLEXIO_I2S_Type *base,
flexio_i2s_handle_t *handle,
flexio_i2s_transfer_t *xfer);
/*!
* @brief Aborts the current send.
*
* @note This API can be called at any time when interrupt non-blocking transfer initiates
* to abort the transfer in a early time.
*
* @param base Pointer to FLEXIO_I2S_Type structure.
* @param handle Pointer to flexio_i2s_handle_t structure which stores the transfer state
*/
void FLEXIO_I2S_TransferAbortSend(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle);
/*!
* @brief Aborts the current receive.
*
* @note This API can be called at any time when interrupt non-blocking transfer initiates
* to abort the transfer in a early time.
*
* @param base Pointer to FLEXIO_I2S_Type structure.
* @param handle Pointer to flexio_i2s_handle_t structure which stores the transfer state
*/
void FLEXIO_I2S_TransferAbortReceive(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle);
/*!
* @brief Gets the remaining bytes to be sent.
*
* @param base Pointer to FLEXIO_I2S_Type structure.
* @param handle Pointer to flexio_i2s_handle_t structure which stores the transfer state
* @param count Bytes sent.
* @retval kStatus_Success Succeed get the transfer count.
* @retval kStatus_NoTransferInProgress There is not a non-blocking transaction currently in progress.
*/
status_t FLEXIO_I2S_TransferGetSendCount(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle, size_t *count);
/*!
* @brief Gets the remaining bytes to be received.
*
* @param base Pointer to FLEXIO_I2S_Type structure.
* @param handle Pointer to flexio_i2s_handle_t structure which stores the transfer state
* @return count Bytes received.
* @retval kStatus_Success Succeed get the transfer count.
* @retval kStatus_NoTransferInProgress There is not a non-blocking transaction currently in progress.
*/
status_t FLEXIO_I2S_TransferGetReceiveCount(FLEXIO_I2S_Type *base, flexio_i2s_handle_t *handle, size_t *count);
/*!
* @brief Tx interrupt handler.
*
* @param i2sBase Pointer to FLEXIO_I2S_Type structure.
* @param i2sHandle Pointer to flexio_i2s_handle_t structure
*/
void FLEXIO_I2S_TransferTxHandleIRQ(void *i2sBase, void *i2sHandle);
/*!
* @brief Rx interrupt handler.
*
* @param i2sBase Pointer to FLEXIO_I2S_Type structure.
* @param i2sHandle Pointer to flexio_i2s_handle_t structure.
*/
void FLEXIO_I2S_TransferRxHandleIRQ(void *i2sBase, void *i2sHandle);
/*! @} */
#if defined(__cplusplus)
}
#endif /*_cplusplus*/
/*! @} */
#endif /* _FSL_FLEXIO_I2S_H_ */