rt-thread/bsp/frdm-k64f/device/MK64F12/fsl_sdhc.h

1096 lines
44 KiB
C

/*
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_SDHC_H_
#define _FSL_SDHC_H_
#include "fsl_common.h"
/*!
* @addtogroup sdhc
* @{
*/
/******************************************************************************
* Definitions.
*****************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief Driver version 2.1.5. */
#define FSL_SDHC_DRIVER_VERSION (MAKE_VERSION(2U, 1U, 5U))
/*@}*/
/*! @brief Maximum block count can be set one time */
#define SDHC_MAX_BLOCK_COUNT (SDHC_BLKATTR_BLKCNT_MASK >> SDHC_BLKATTR_BLKCNT_SHIFT)
/*! @brief SDHC status */
enum _sdhc_status
{
kStatus_SDHC_BusyTransferring = MAKE_STATUS(kStatusGroup_SDHC, 0U), /*!< Transfer is on-going */
kStatus_SDHC_PrepareAdmaDescriptorFailed = MAKE_STATUS(kStatusGroup_SDHC, 1U), /*!< Set DMA descriptor failed */
kStatus_SDHC_SendCommandFailed = MAKE_STATUS(kStatusGroup_SDHC, 2U), /*!< Send command failed */
kStatus_SDHC_TransferDataFailed = MAKE_STATUS(kStatusGroup_SDHC, 3U), /*!< Transfer data failed */
kStatus_SDHC_DMADataBufferAddrNotAlign =
MAKE_STATUS(kStatusGroup_SDHC, 4U), /*!< data buffer addr not align in DMA mode */
};
/*! @brief Host controller capabilities flag mask */
enum _sdhc_capability_flag
{
kSDHC_SupportAdmaFlag = SDHC_HTCAPBLT_ADMAS_MASK, /*!< Support ADMA */
kSDHC_SupportHighSpeedFlag = SDHC_HTCAPBLT_HSS_MASK, /*!< Support high-speed */
kSDHC_SupportDmaFlag = SDHC_HTCAPBLT_DMAS_MASK, /*!< Support DMA */
kSDHC_SupportSuspendResumeFlag = SDHC_HTCAPBLT_SRS_MASK, /*!< Support suspend/resume */
kSDHC_SupportV330Flag = SDHC_HTCAPBLT_VS33_MASK, /*!< Support voltage 3.3V */
#if defined FSL_FEATURE_SDHC_HAS_V300_SUPPORT && FSL_FEATURE_SDHC_HAS_V300_SUPPORT
kSDHC_SupportV300Flag = SDHC_HTCAPBLT_VS30_MASK, /*!< Support voltage 3.0V */
#endif
#if defined FSL_FEATURE_SDHC_HAS_V180_SUPPORT && FSL_FEATURE_SDHC_HAS_V180_SUPPORT
kSDHC_SupportV180Flag = SDHC_HTCAPBLT_VS18_MASK, /*!< Support voltage 1.8V */
#endif
/* Put additional two flags in HTCAPBLT_MBL's position. */
kSDHC_Support4BitFlag = (SDHC_HTCAPBLT_MBL_SHIFT << 0U), /*!< Support 4 bit mode */
kSDHC_Support8BitFlag = (SDHC_HTCAPBLT_MBL_SHIFT << 1U), /*!< Support 8 bit mode */
};
/*! @brief Wakeup event mask */
enum _sdhc_wakeup_event
{
kSDHC_WakeupEventOnCardInt = SDHC_PROCTL_WECINT_MASK, /*!< Wakeup on card interrupt */
kSDHC_WakeupEventOnCardInsert = SDHC_PROCTL_WECINS_MASK, /*!< Wakeup on card insertion */
kSDHC_WakeupEventOnCardRemove = SDHC_PROCTL_WECRM_MASK, /*!< Wakeup on card removal */
kSDHC_WakeupEventsAll = (kSDHC_WakeupEventOnCardInt | kSDHC_WakeupEventOnCardInsert |
kSDHC_WakeupEventOnCardRemove), /*!< All wakeup events */
};
/*! @brief Reset type mask */
enum _sdhc_reset
{
kSDHC_ResetAll = SDHC_SYSCTL_RSTA_MASK, /*!< Reset all except card detection */
kSDHC_ResetCommand = SDHC_SYSCTL_RSTC_MASK, /*!< Reset command line */
kSDHC_ResetData = SDHC_SYSCTL_RSTD_MASK, /*!< Reset data line */
kSDHC_ResetsAll = (kSDHC_ResetAll | kSDHC_ResetCommand | kSDHC_ResetData), /*!< All reset types */
};
/*! @brief Transfer flag mask */
enum _sdhc_transfer_flag
{
kSDHC_EnableDmaFlag = SDHC_XFERTYP_DMAEN_MASK, /*!< Enable DMA */
kSDHC_CommandTypeSuspendFlag = (SDHC_XFERTYP_CMDTYP(1U)), /*!< Suspend command */
kSDHC_CommandTypeResumeFlag = (SDHC_XFERTYP_CMDTYP(2U)), /*!< Resume command */
kSDHC_CommandTypeAbortFlag = (SDHC_XFERTYP_CMDTYP(3U)), /*!< Abort command */
kSDHC_EnableBlockCountFlag = SDHC_XFERTYP_BCEN_MASK, /*!< Enable block count */
kSDHC_EnableAutoCommand12Flag = SDHC_XFERTYP_AC12EN_MASK, /*!< Enable auto CMD12 */
kSDHC_DataReadFlag = SDHC_XFERTYP_DTDSEL_MASK, /*!< Enable data read */
kSDHC_MultipleBlockFlag = SDHC_XFERTYP_MSBSEL_MASK, /*!< Multiple block data read/write */
kSDHC_ResponseLength136Flag = SDHC_XFERTYP_RSPTYP(1U), /*!< 136 bit response length */
kSDHC_ResponseLength48Flag = SDHC_XFERTYP_RSPTYP(2U), /*!< 48 bit response length */
kSDHC_ResponseLength48BusyFlag = SDHC_XFERTYP_RSPTYP(3U), /*!< 48 bit response length with busy status */
kSDHC_EnableCrcCheckFlag = SDHC_XFERTYP_CCCEN_MASK, /*!< Enable CRC check */
kSDHC_EnableIndexCheckFlag = SDHC_XFERTYP_CICEN_MASK, /*!< Enable index check */
kSDHC_DataPresentFlag = SDHC_XFERTYP_DPSEL_MASK, /*!< Data present flag */
};
/*! @brief Present status flag mask */
enum _sdhc_present_status_flag
{
kSDHC_CommandInhibitFlag = SDHC_PRSSTAT_CIHB_MASK, /*!< Command inhibit */
kSDHC_DataInhibitFlag = SDHC_PRSSTAT_CDIHB_MASK, /*!< Data inhibit */
kSDHC_DataLineActiveFlag = SDHC_PRSSTAT_DLA_MASK, /*!< Data line active */
kSDHC_SdClockStableFlag = SDHC_PRSSTAT_SDSTB_MASK, /*!< SD bus clock stable */
kSDHC_WriteTransferActiveFlag = SDHC_PRSSTAT_WTA_MASK, /*!< Write transfer active */
kSDHC_ReadTransferActiveFlag = SDHC_PRSSTAT_RTA_MASK, /*!< Read transfer active */
kSDHC_BufferWriteEnableFlag = SDHC_PRSSTAT_BWEN_MASK, /*!< Buffer write enable */
kSDHC_BufferReadEnableFlag = SDHC_PRSSTAT_BREN_MASK, /*!< Buffer read enable */
kSDHC_CardInsertedFlag = SDHC_PRSSTAT_CINS_MASK, /*!< Card inserted */
kSDHC_CommandLineLevelFlag = SDHC_PRSSTAT_CLSL_MASK, /*!< Command line signal level */
kSDHC_Data0LineLevelFlag = (1U << 24U), /*!< Data0 line signal level */
kSDHC_Data1LineLevelFlag = (1U << 25U), /*!< Data1 line signal level */
kSDHC_Data2LineLevelFlag = (1U << 26U), /*!< Data2 line signal level */
kSDHC_Data3LineLevelFlag = (1U << 27U), /*!< Data3 line signal level */
kSDHC_Data4LineLevelFlag = (1U << 28U), /*!< Data4 line signal level */
kSDHC_Data5LineLevelFlag = (1U << 29U), /*!< Data5 line signal level */
kSDHC_Data6LineLevelFlag = (1U << 30U), /*!< Data6 line signal level */
kSDHC_Data7LineLevelFlag = (1U << 31U), /*!< Data7 line signal level */
};
/*! @brief Interrupt status flag mask */
enum _sdhc_interrupt_status_flag
{
kSDHC_CommandCompleteFlag = SDHC_IRQSTAT_CC_MASK, /*!< Command complete */
kSDHC_DataCompleteFlag = SDHC_IRQSTAT_TC_MASK, /*!< Data complete */
kSDHC_BlockGapEventFlag = SDHC_IRQSTAT_BGE_MASK, /*!< Block gap event */
kSDHC_DmaCompleteFlag = SDHC_IRQSTAT_DINT_MASK, /*!< DMA interrupt */
kSDHC_BufferWriteReadyFlag = SDHC_IRQSTAT_BWR_MASK, /*!< Buffer write ready */
kSDHC_BufferReadReadyFlag = SDHC_IRQSTAT_BRR_MASK, /*!< Buffer read ready */
kSDHC_CardInsertionFlag = SDHC_IRQSTAT_CINS_MASK, /*!< Card inserted */
kSDHC_CardRemovalFlag = SDHC_IRQSTAT_CRM_MASK, /*!< Card removed */
kSDHC_CardInterruptFlag = SDHC_IRQSTAT_CINT_MASK, /*!< Card interrupt */
kSDHC_CommandTimeoutFlag = SDHC_IRQSTAT_CTOE_MASK, /*!< Command timeout error */
kSDHC_CommandCrcErrorFlag = SDHC_IRQSTAT_CCE_MASK, /*!< Command CRC error */
kSDHC_CommandEndBitErrorFlag = SDHC_IRQSTAT_CEBE_MASK, /*!< Command end bit error */
kSDHC_CommandIndexErrorFlag = SDHC_IRQSTAT_CIE_MASK, /*!< Command index error */
kSDHC_DataTimeoutFlag = SDHC_IRQSTAT_DTOE_MASK, /*!< Data timeout error */
kSDHC_DataCrcErrorFlag = SDHC_IRQSTAT_DCE_MASK, /*!< Data CRC error */
kSDHC_DataEndBitErrorFlag = SDHC_IRQSTAT_DEBE_MASK, /*!< Data end bit error */
kSDHC_AutoCommand12ErrorFlag = SDHC_IRQSTAT_AC12E_MASK, /*!< Auto CMD12 error */
kSDHC_DmaErrorFlag = SDHC_IRQSTAT_DMAE_MASK, /*!< DMA error */
kSDHC_CommandErrorFlag = (kSDHC_CommandTimeoutFlag | kSDHC_CommandCrcErrorFlag | kSDHC_CommandEndBitErrorFlag |
kSDHC_CommandIndexErrorFlag), /*!< Command error */
kSDHC_DataErrorFlag = (kSDHC_DataTimeoutFlag | kSDHC_DataCrcErrorFlag | kSDHC_DataEndBitErrorFlag |
kSDHC_AutoCommand12ErrorFlag), /*!< Data error */
kSDHC_ErrorFlag = (kSDHC_CommandErrorFlag | kSDHC_DataErrorFlag | kSDHC_DmaErrorFlag), /*!< All error */
kSDHC_DataFlag = (kSDHC_DataCompleteFlag | kSDHC_DmaCompleteFlag | kSDHC_BufferWriteReadyFlag |
kSDHC_BufferReadReadyFlag | kSDHC_DataErrorFlag | kSDHC_DmaErrorFlag), /*!< Data interrupts */
kSDHC_CommandFlag = (kSDHC_CommandErrorFlag | kSDHC_CommandCompleteFlag), /*!< Command interrupts */
kSDHC_CardDetectFlag = (kSDHC_CardInsertionFlag | kSDHC_CardRemovalFlag), /*!< Card detection interrupts */
kSDHC_AllInterruptFlags = (kSDHC_BlockGapEventFlag | kSDHC_CardInterruptFlag | kSDHC_CommandFlag | kSDHC_DataFlag |
kSDHC_ErrorFlag), /*!< All flags mask */
};
/*! @brief Auto CMD12 error status flag mask */
enum _sdhc_auto_command12_error_status_flag
{
kSDHC_AutoCommand12NotExecutedFlag = SDHC_AC12ERR_AC12NE_MASK, /*!< Not executed error */
kSDHC_AutoCommand12TimeoutFlag = SDHC_AC12ERR_AC12TOE_MASK, /*!< Timeout error */
kSDHC_AutoCommand12EndBitErrorFlag = SDHC_AC12ERR_AC12EBE_MASK, /*!< End bit error */
kSDHC_AutoCommand12CrcErrorFlag = SDHC_AC12ERR_AC12CE_MASK, /*!< CRC error */
kSDHC_AutoCommand12IndexErrorFlag = SDHC_AC12ERR_AC12IE_MASK, /*!< Index error */
kSDHC_AutoCommand12NotIssuedFlag = SDHC_AC12ERR_CNIBAC12E_MASK, /*!< Not issued error */
};
/*! @brief ADMA error status flag mask */
enum _sdhc_adma_error_status_flag
{
kSDHC_AdmaLenghMismatchFlag = SDHC_ADMAES_ADMALME_MASK, /*!< Length mismatch error */
kSDHC_AdmaDescriptorErrorFlag = SDHC_ADMAES_ADMADCE_MASK, /*!< Descriptor error */
};
/*!
* @brief ADMA error state
*
* This state is the detail state when ADMA error has occurred.
*/
typedef enum _sdhc_adma_error_state
{
kSDHC_AdmaErrorStateStopDma = 0x00U, /*!< Stop DMA */
kSDHC_AdmaErrorStateFetchDescriptor = 0x01U, /*!< Fetch descriptor */
kSDHC_AdmaErrorStateChangeAddress = 0x02U, /*!< Change address */
kSDHC_AdmaErrorStateTransferData = 0x03U, /*!< Transfer data */
} sdhc_adma_error_state_t;
/*! @brief Force event mask */
enum _sdhc_force_event
{
kSDHC_ForceEventAutoCommand12NotExecuted = SDHC_FEVT_AC12NE_MASK, /*!< Auto CMD12 not executed error */
kSDHC_ForceEventAutoCommand12Timeout = SDHC_FEVT_AC12TOE_MASK, /*!< Auto CMD12 timeout error */
kSDHC_ForceEventAutoCommand12CrcError = SDHC_FEVT_AC12CE_MASK, /*!< Auto CMD12 CRC error */
kSDHC_ForceEventEndBitError = SDHC_FEVT_AC12EBE_MASK, /*!< Auto CMD12 end bit error */
kSDHC_ForceEventAutoCommand12IndexError = SDHC_FEVT_AC12IE_MASK, /*!< Auto CMD12 index error */
kSDHC_ForceEventAutoCommand12NotIssued = SDHC_FEVT_CNIBAC12E_MASK, /*!< Auto CMD12 not issued error */
kSDHC_ForceEventCommandTimeout = SDHC_FEVT_CTOE_MASK, /*!< Command timeout error */
kSDHC_ForceEventCommandCrcError = SDHC_FEVT_CCE_MASK, /*!< Command CRC error */
kSDHC_ForceEventCommandEndBitError = SDHC_FEVT_CEBE_MASK, /*!< Command end bit error */
kSDHC_ForceEventCommandIndexError = SDHC_FEVT_CIE_MASK, /*!< Command index error */
kSDHC_ForceEventDataTimeout = SDHC_FEVT_DTOE_MASK, /*!< Data timeout error */
kSDHC_ForceEventDataCrcError = SDHC_FEVT_DCE_MASK, /*!< Data CRC error */
kSDHC_ForceEventDataEndBitError = SDHC_FEVT_DEBE_MASK, /*!< Data end bit error */
kSDHC_ForceEventAutoCommand12Error = SDHC_FEVT_AC12E_MASK, /*!< Auto CMD12 error */
kSDHC_ForceEventCardInt = SDHC_FEVT_CINT_MASK, /*!< Card interrupt */
kSDHC_ForceEventDmaError = SDHC_FEVT_DMAE_MASK, /*!< Dma error */
kSDHC_ForceEventsAll =
(kSDHC_ForceEventAutoCommand12NotExecuted | kSDHC_ForceEventAutoCommand12Timeout |
kSDHC_ForceEventAutoCommand12CrcError | kSDHC_ForceEventEndBitError | kSDHC_ForceEventAutoCommand12IndexError |
kSDHC_ForceEventAutoCommand12NotIssued | kSDHC_ForceEventCommandTimeout | kSDHC_ForceEventCommandCrcError |
kSDHC_ForceEventCommandEndBitError | kSDHC_ForceEventCommandIndexError | kSDHC_ForceEventDataTimeout |
kSDHC_ForceEventDataCrcError | kSDHC_ForceEventDataEndBitError | kSDHC_ForceEventAutoCommand12Error |
kSDHC_ForceEventCardInt | kSDHC_ForceEventDmaError), /*!< All force event flags mask */
};
/*! @brief Data transfer width */
typedef enum _sdhc_data_bus_width
{
kSDHC_DataBusWidth1Bit = 0U, /*!< 1-bit mode */
kSDHC_DataBusWidth4Bit = 1U, /*!< 4-bit mode */
kSDHC_DataBusWidth8Bit = 2U, /*!< 8-bit mode */
} sdhc_data_bus_width_t;
/*! @brief Endian mode */
typedef enum _sdhc_endian_mode
{
kSDHC_EndianModeBig = 0U, /*!< Big endian mode */
kSDHC_EndianModeHalfWordBig = 1U, /*!< Half word big endian mode */
kSDHC_EndianModeLittle = 2U, /*!< Little endian mode */
} sdhc_endian_mode_t;
/*! @brief DMA mode */
typedef enum _sdhc_dma_mode
{
kSDHC_DmaModeNo = 0U, /*!< No DMA */
kSDHC_DmaModeAdma1 = 1U, /*!< ADMA1 is selected */
kSDHC_DmaModeAdma2 = 2U, /*!< ADMA2 is selected */
} sdhc_dma_mode_t;
/*! @brief SDIO control flag mask */
enum _sdhc_sdio_control_flag
{
kSDHC_StopAtBlockGapFlag = 0x01, /*!< Stop at block gap */
kSDHC_ReadWaitControlFlag = 0x02, /*!< Read wait control */
kSDHC_InterruptAtBlockGapFlag = 0x04, /*!< Interrupt at block gap */
kSDHC_ExactBlockNumberReadFlag = 0x08, /*!< Exact block number read */
};
/*! @brief MMC card boot mode */
typedef enum _sdhc_boot_mode
{
kSDHC_BootModeNormal = 0U, /*!< Normal boot */
kSDHC_BootModeAlternative = 1U, /*!< Alternative boot */
} sdhc_boot_mode_t;
/*! @brief The command type */
typedef enum _sdhc_card_command_type
{
kCARD_CommandTypeNormal = 0U, /*!< Normal command */
kCARD_CommandTypeSuspend = 1U, /*!< Suspend command */
kCARD_CommandTypeResume = 2U, /*!< Resume command */
kCARD_CommandTypeAbort = 3U, /*!< Abort command */
} sdhc_card_command_type_t;
/*!
* @brief The command response type.
*
* Define the command response type from card to host controller.
*/
typedef enum _sdhc_card_response_type
{
kCARD_ResponseTypeNone = 0U, /*!< Response type: none */
kCARD_ResponseTypeR1 = 1U, /*!< Response type: R1 */
kCARD_ResponseTypeR1b = 2U, /*!< Response type: R1b */
kCARD_ResponseTypeR2 = 3U, /*!< Response type: R2 */
kCARD_ResponseTypeR3 = 4U, /*!< Response type: R3 */
kCARD_ResponseTypeR4 = 5U, /*!< Response type: R4 */
kCARD_ResponseTypeR5 = 6U, /*!< Response type: R5 */
kCARD_ResponseTypeR5b = 7U, /*!< Response type: R5b */
kCARD_ResponseTypeR6 = 8U, /*!< Response type: R6 */
kCARD_ResponseTypeR7 = 9U, /*!< Response type: R7 */
} sdhc_card_response_type_t;
/*! @brief The alignment size for ADDRESS filed in ADMA1's descriptor */
#define SDHC_ADMA1_ADDRESS_ALIGN (4096U)
/*! @brief The alignment size for LENGTH field in ADMA1's descriptor */
#define SDHC_ADMA1_LENGTH_ALIGN (4096U)
/*! @brief The alignment size for ADDRESS field in ADMA2's descriptor */
#define SDHC_ADMA2_ADDRESS_ALIGN (4U)
/*! @brief The alignment size for LENGTH filed in ADMA2's descriptor */
#define SDHC_ADMA2_LENGTH_ALIGN (4U)
/* ADMA1 descriptor table
* |------------------------|---------|--------------------------|
* | Address/page field |Reserved | Attribute |
* |------------------------|---------|--------------------------|
* |31 12|11 6|05 |04 |03|02 |01 |00 |
* |------------------------|---------|----|----|--|---|---|-----|
* | address or data length | 000000 |Act2|Act1| 0|Int|End|Valid|
* |------------------------|---------|----|----|--|---|---|-----|
*
*
* |------|------|-----------------|-------|-------------|
* | Act2 | Act1 | Comment | 31-28 | 27 - 12 |
* |------|------|-----------------|---------------------|
* | 0 | 0 | No op | Don't care |
* |------|------|-----------------|-------|-------------|
* | 0 | 1 | Set data length | 0000 | Data Length |
* |------|------|-----------------|-------|-------------|
* | 1 | 0 | Transfer data | Data address |
* |------|------|-----------------|---------------------|
* | 1 | 1 | Link descriptor | Descriptor address |
* |------|------|-----------------|---------------------|
*/
/*! @brief The bit shift for ADDRESS filed in ADMA1's descriptor */
#define SDHC_ADMA1_DESCRIPTOR_ADDRESS_SHIFT (12U)
/*! @brief The bit mask for ADDRESS field in ADMA1's descriptor */
#define SDHC_ADMA1_DESCRIPTOR_ADDRESS_MASK (0xFFFFFU)
/*! @brief The bit shift for LENGTH filed in ADMA1's descriptor */
#define SDHC_ADMA1_DESCRIPTOR_LENGTH_SHIFT (12U)
/*! @brief The mask for LENGTH field in ADMA1's descriptor */
#define SDHC_ADMA1_DESCRIPTOR_LENGTH_MASK (0xFFFFU)
/*! @brief The maximum value of LENGTH filed in ADMA1's descriptor */
#define SDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (SDHC_ADMA1_DESCRIPTOR_LENGTH_MASK + 1U)
/*! @brief The mask for the control/status field in ADMA1 descriptor */
enum _sdhc_adma1_descriptor_flag
{
kSDHC_Adma1DescriptorValidFlag = (1U << 0U), /*!< Valid flag */
kSDHC_Adma1DescriptorEndFlag = (1U << 1U), /*!< End flag */
kSDHC_Adma1DescriptorInterrupFlag = (1U << 2U), /*!< Interrupt flag */
kSDHC_Adma1DescriptorActivity1Flag = (1U << 4U), /*!< Activity 1 flag */
kSDHC_Adma1DescriptorActivity2Flag = (1U << 5U), /*!< Activity 2 flag */
kSDHC_Adma1DescriptorTypeNop = (kSDHC_Adma1DescriptorValidFlag), /*!< No operation */
kSDHC_Adma1DescriptorTypeTransfer =
(kSDHC_Adma1DescriptorActivity2Flag | kSDHC_Adma1DescriptorValidFlag), /*!< Transfer data */
kSDHC_Adma1DescriptorTypeLink = (kSDHC_Adma1DescriptorActivity1Flag | kSDHC_Adma1DescriptorActivity2Flag |
kSDHC_Adma1DescriptorValidFlag), /*!< Link descriptor */
kSDHC_Adma1DescriptorTypeSetLength =
(kSDHC_Adma1DescriptorActivity1Flag | kSDHC_Adma1DescriptorValidFlag), /*!< Set data length */
};
/* ADMA2 descriptor table
* |----------------|---------------|-------------|--------------------------|
* | Address field | Length | Reserved | Attribute |
* |----------------|---------------|-------------|--------------------------|
* |63 32|31 16|15 06|05 |04 |03|02 |01 |00 |
* |----------------|---------------|-------------|----|----|--|---|---|-----|
* | 32-bit address | 16-bit length | 0000000000 |Act2|Act1| 0|Int|End|Valid|
* |----------------|---------------|-------------|----|----|--|---|---|-----|
*
*
* | Act2 | Act1 | Comment | Operation |
* |------|------|-----------------|-------------------------------------------------------------------|
* | 0 | 0 | No op | Don't care |
* |------|------|-----------------|-------------------------------------------------------------------|
* | 0 | 1 | Reserved | Read this line and go to next one |
* |------|------|-----------------|-------------------------------------------------------------------|
* | 1 | 0 | Transfer data | Transfer data with address and length set in this descriptor line |
* |------|------|-----------------|-------------------------------------------------------------------|
* | 1 | 1 | Link descriptor | Link to another descriptor |
* |------|------|-----------------|-------------------------------------------------------------------|
*/
/*! @brief The bit shift for LENGTH field in ADMA2's descriptor */
#define SDHC_ADMA2_DESCRIPTOR_LENGTH_SHIFT (16U)
/*! @brief The bit mask for LENGTH field in ADMA2's descriptor */
#define SDHC_ADMA2_DESCRIPTOR_LENGTH_MASK (0xFFFFU)
/*! @brief The maximum value of LENGTH field in ADMA2's descriptor */
#define SDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (SDHC_ADMA2_DESCRIPTOR_LENGTH_MASK)
/*! @brief ADMA1 descriptor control and status mask */
enum _sdhc_adma2_descriptor_flag
{
kSDHC_Adma2DescriptorValidFlag = (1U << 0U), /*!< Valid flag */
kSDHC_Adma2DescriptorEndFlag = (1U << 1U), /*!< End flag */
kSDHC_Adma2DescriptorInterruptFlag = (1U << 2U), /*!< Interrupt flag */
kSDHC_Adma2DescriptorActivity1Flag = (1U << 4U), /*!< Activity 1 mask */
kSDHC_Adma2DescriptorActivity2Flag = (1U << 5U), /*!< Activity 2 mask */
kSDHC_Adma2DescriptorTypeNop = (kSDHC_Adma2DescriptorValidFlag), /*!< No operation */
kSDHC_Adma2DescriptorTypeReserved =
(kSDHC_Adma2DescriptorActivity1Flag | kSDHC_Adma2DescriptorValidFlag), /*!< Reserved */
kSDHC_Adma2DescriptorTypeTransfer =
(kSDHC_Adma2DescriptorActivity2Flag | kSDHC_Adma2DescriptorValidFlag), /*!< Transfer type */
kSDHC_Adma2DescriptorTypeLink = (kSDHC_Adma2DescriptorActivity1Flag | kSDHC_Adma2DescriptorActivity2Flag |
kSDHC_Adma2DescriptorValidFlag), /*!< Link type */
};
/*! @brief Defines the adma1 descriptor structure. */
typedef uint32_t sdhc_adma1_descriptor_t;
/*! @brief Defines the ADMA2 descriptor structure. */
typedef struct _sdhc_adma2_descriptor
{
uint32_t attribute; /*!< The control and status field */
const uint32_t *address; /*!< The address field */
} sdhc_adma2_descriptor_t;
/*!
* @brief SDHC capability information.
*
* Defines a structure to save the capability information of SDHC.
*/
typedef struct _sdhc_capability
{
uint32_t specVersion; /*!< Specification version */
uint32_t vendorVersion; /*!< Vendor version */
uint32_t maxBlockLength; /*!< Maximum block length united as byte */
uint32_t maxBlockCount; /*!< Maximum block count can be set one time */
uint32_t flags; /*!< Capability flags to indicate the support information(_sdhc_capability_flag) */
} sdhc_capability_t;
/*! @brief Card transfer configuration.
*
* Define structure to configure the transfer-related command index/argument/flags and data block
* size/data block numbers. This structure needs to be filled each time a command is sent to the card.
*/
typedef struct _sdhc_transfer_config
{
size_t dataBlockSize; /*!< Data block size */
uint32_t dataBlockCount; /*!< Data block count */
uint32_t commandArgument; /*!< Command argument */
uint32_t commandIndex; /*!< Command index */
uint32_t flags; /*!< Transfer flags(_sdhc_transfer_flag) */
} sdhc_transfer_config_t;
/*! @brief Data structure to configure the MMC boot feature */
typedef struct _sdhc_boot_config
{
uint32_t ackTimeoutCount; /*!< Timeout value for the boot ACK. The available range is 0 ~ 15. */
sdhc_boot_mode_t bootMode; /*!< Boot mode selection. */
uint32_t blockCount; /*!< Stop at block gap value of automatic mode. Available range is 0 ~ 65535. */
bool enableBootAck; /*!< Enable or disable boot ACK */
bool enableBoot; /*!< Enable or disable fast boot */
bool enableAutoStopAtBlockGap; /*!< Enable or disable auto stop at block gap function in boot period */
} sdhc_boot_config_t;
/*! @brief Data structure to initialize the SDHC */
typedef struct _sdhc_config
{
bool cardDetectDat3; /*!< Enable DAT3 as card detection pin */
sdhc_endian_mode_t endianMode; /*!< Endian mode */
sdhc_dma_mode_t dmaMode; /*!< DMA mode */
uint32_t readWatermarkLevel; /*!< Watermark level for DMA read operation. Available range is 1 ~ 128. */
uint32_t writeWatermarkLevel; /*!< Watermark level for DMA write operation. Available range is 1 ~ 128. */
} sdhc_config_t;
/*!
* @brief Card data descriptor
*
* Defines a structure to contain data-related attribute. 'enableIgnoreError' is used for the case that upper card
* driver
* want to ignore the error event to read/write all the data not to stop read/write immediately when error event
* happen for example bus testing procedure for MMC card.
*/
typedef struct _sdhc_data
{
bool enableAutoCommand12; /*!< Enable auto CMD12 */
bool enableIgnoreError; /*!< Enable to ignore error event to read/write all the data */
size_t blockSize; /*!< Block size */
uint32_t blockCount; /*!< Block count */
uint32_t *rxData; /*!< Buffer to save data read */
const uint32_t *txData; /*!< Data buffer to write */
} sdhc_data_t;
/*!
* @brief Card command descriptor
*
* Define card command-related attribute.
*/
typedef struct _sdhc_command
{
uint32_t index; /*!< Command index */
uint32_t argument; /*!< Command argument */
sdhc_card_command_type_t type; /*!< Command type */
sdhc_card_response_type_t responseType; /*!< Command response type */
uint32_t response[4U]; /*!< Response for this command */
uint32_t responseErrorFlags; /*!< response error flag, the flag which need to check
the command reponse*/
} sdhc_command_t;
/*! @brief Transfer state */
typedef struct _sdhc_transfer
{
sdhc_data_t *data; /*!< Data to transfer */
sdhc_command_t *command; /*!< Command to send */
} sdhc_transfer_t;
/*! @brief SDHC handle typedef */
typedef struct _sdhc_handle sdhc_handle_t;
/*! @brief SDHC callback functions. */
typedef struct _sdhc_transfer_callback
{
void (*CardInserted)(void); /*!< Card inserted occurs when DAT3/CD pin is for card detect */
void (*CardRemoved)(void); /*!< Card removed occurs */
void (*SdioInterrupt)(void); /*!< SDIO card interrupt occurs */
void (*SdioBlockGap)(void); /*!< SDIO card stopped at block gap occurs */
void (*TransferComplete)(SDHC_Type *base,
sdhc_handle_t *handle,
status_t status,
void *userData); /*!< Transfer complete callback */
} sdhc_transfer_callback_t;
/*!
* @brief SDHC handle
*
* Defines the structure to save the SDHC state information and callback function. The detailed interrupt status when
* sending a command or transfering data can be obtained from the interruptFlags field by using the mask defined in
* sdhc_interrupt_flag_t.
*
* @note All the fields except interruptFlags and transferredWords must be allocated by the user.
*/
struct _sdhc_handle
{
/* Transfer parameter */
sdhc_data_t *volatile data; /*!< Data to transfer */
sdhc_command_t *volatile command; /*!< Command to send */
/* Transfer status */
volatile uint32_t interruptFlags; /*!< Interrupt flags of last transaction */
volatile uint32_t transferredWords; /*!< Words transferred by DATAPORT way */
/* Callback functions */
sdhc_transfer_callback_t callback; /*!< Callback function */
void *userData; /*!< Parameter for transfer complete callback */
};
/*! @brief SDHC transfer function. */
typedef status_t (*sdhc_transfer_function_t)(SDHC_Type *base, sdhc_transfer_t *content);
/*! @brief SDHC host descriptor */
typedef struct _sdhc_host
{
SDHC_Type *base; /*!< SDHC peripheral base address */
uint32_t sourceClock_Hz; /*!< SDHC source clock frequency united in Hz */
sdhc_config_t config; /*!< SDHC configuration */
sdhc_capability_t capability; /*!< SDHC capability information */
sdhc_transfer_function_t transfer; /*!< SDHC transfer function */
} sdhc_host_t;
/*************************************************************************************************
* API
************************************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @name Initialization and deinitialization
* @{
*/
/*!
* @brief SDHC module initialization function.
*
* Configures the SDHC according to the user configuration.
*
* Example:
@code
sdhc_config_t config;
config.cardDetectDat3 = false;
config.endianMode = kSDHC_EndianModeLittle;
config.dmaMode = kSDHC_DmaModeAdma2;
config.readWatermarkLevel = 128U;
config.writeWatermarkLevel = 128U;
SDHC_Init(SDHC, &config);
@endcode
*
* @param base SDHC peripheral base address.
* @param config SDHC configuration information.
* @retval kStatus_Success Operate successfully.
*/
void SDHC_Init(SDHC_Type *base, const sdhc_config_t *config);
/*!
* @brief Deinitializes the SDHC.
*
* @param base SDHC peripheral base address.
*/
void SDHC_Deinit(SDHC_Type *base);
/*!
* @brief Resets the SDHC.
*
* @param base SDHC peripheral base address.
* @param mask The reset type mask(_sdhc_reset).
* @param timeout Timeout for reset.
* @retval true Reset successfully.
* @retval false Reset failed.
*/
bool SDHC_Reset(SDHC_Type *base, uint32_t mask, uint32_t timeout);
/* @} */
/*!
* @name DMA Control
* @{
*/
/*!
* @brief Sets the ADMA descriptor table configuration.
*
* @param base SDHC peripheral base address.
* @param dmaMode DMA mode.
* @param table ADMA table address.
* @param tableWords ADMA table buffer length united as Words.
* @param data Data buffer address.
* @param dataBytes Data length united as bytes.
* @retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data.
* @retval kStatus_Success Operate successfully.
*/
status_t SDHC_SetAdmaTableConfig(SDHC_Type *base,
sdhc_dma_mode_t dmaMode,
uint32_t *table,
uint32_t tableWords,
const uint32_t *data,
uint32_t dataBytes);
/* @} */
/*!
* @name Interrupts
* @{
*/
/*!
* @brief Enables the interrupt status.
*
* @param base SDHC peripheral base address.
* @param mask Interrupt status flags mask(_sdhc_interrupt_status_flag).
*/
static inline void SDHC_EnableInterruptStatus(SDHC_Type *base, uint32_t mask)
{
base->IRQSTATEN |= mask;
}
/*!
* @brief Disables the interrupt status.
*
* @param base SDHC peripheral base address.
* @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag).
*/
static inline void SDHC_DisableInterruptStatus(SDHC_Type *base, uint32_t mask)
{
base->IRQSTATEN &= ~mask;
}
/*!
* @brief Enables the interrupt signal corresponding to the interrupt status flag.
*
* @param base SDHC peripheral base address.
* @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag).
*/
static inline void SDHC_EnableInterruptSignal(SDHC_Type *base, uint32_t mask)
{
base->IRQSIGEN |= mask;
}
/*!
* @brief Disables the interrupt signal corresponding to the interrupt status flag.
*
* @param base SDHC peripheral base address.
* @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag).
*/
static inline void SDHC_DisableInterruptSignal(SDHC_Type *base, uint32_t mask)
{
base->IRQSIGEN &= ~mask;
}
/* @} */
/*!
* @name Status
* @{
*/
/*!
* @brief Gets the current interrupt status.
*
* @param base SDHC peripheral base address.
* @return Current interrupt status flags mask(_sdhc_interrupt_status_flag).
*/
static inline uint32_t SDHC_GetInterruptStatusFlags(SDHC_Type *base)
{
return base->IRQSTAT;
}
/*!
* @brief Clears a specified interrupt status.
*
* @param base SDHC peripheral base address.
* @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag).
*/
static inline void SDHC_ClearInterruptStatusFlags(SDHC_Type *base, uint32_t mask)
{
base->IRQSTAT = mask;
}
/*!
* @brief Gets the status of auto command 12 error.
*
* @param base SDHC peripheral base address.
* @return Auto command 12 error status flags mask(_sdhc_auto_command12_error_status_flag).
*/
static inline uint32_t SDHC_GetAutoCommand12ErrorStatusFlags(SDHC_Type *base)
{
return base->AC12ERR;
}
/*!
* @brief Gets the status of the ADMA error.
*
* @param base SDHC peripheral base address.
* @return ADMA error status flags mask(_sdhc_adma_error_status_flag).
*/
static inline uint32_t SDHC_GetAdmaErrorStatusFlags(SDHC_Type *base)
{
return base->ADMAES;
}
/*!
* @brief Gets a present status.
*
* This function gets the present SDHC's status except for an interrupt status and an error status.
*
* @param base SDHC peripheral base address.
* @return Present SDHC's status flags mask(_sdhc_present_status_flag).
*/
static inline uint32_t SDHC_GetPresentStatusFlags(SDHC_Type *base)
{
return base->PRSSTAT;
}
/* @} */
/*!
* @name Bus Operations
* @{
*/
/*!
* @brief Gets the capability information.
*
* @param base SDHC peripheral base address.
* @param capability Structure to save capability information.
*/
void SDHC_GetCapability(SDHC_Type *base, sdhc_capability_t *capability);
/*!
* @brief Enables or disables the SD bus clock.
*
* @param base SDHC peripheral base address.
* @param enable True to enable, false to disable.
*/
static inline void SDHC_EnableSdClock(SDHC_Type *base, bool enable)
{
if (enable)
{
base->SYSCTL |= SDHC_SYSCTL_SDCLKEN_MASK;
}
else
{
base->SYSCTL &= ~SDHC_SYSCTL_SDCLKEN_MASK;
}
}
/*!
* @brief Sets the SD bus clock frequency.
*
* @param base SDHC peripheral base address.
* @param srcClock_Hz SDHC source clock frequency united in Hz.
* @param busClock_Hz SD bus clock frequency united in Hz.
*
* @return The nearest frequency of busClock_Hz configured to SD bus.
*/
uint32_t SDHC_SetSdClock(SDHC_Type *base, uint32_t srcClock_Hz, uint32_t busClock_Hz);
/*!
* @brief Sends 80 clocks to the card to set it to the active state.
*
* This function must be called each time the card is inserted to ensure that the card can receive the command
* correctly.
*
* @param base SDHC peripheral base address.
* @param timeout Timeout to initialize card.
* @retval true Set card active successfully.
* @retval false Set card active failed.
*/
bool SDHC_SetCardActive(SDHC_Type *base, uint32_t timeout);
/*!
* @brief Sets the data transfer width.
*
* @param base SDHC peripheral base address.
* @param width Data transfer width.
*/
static inline void SDHC_SetDataBusWidth(SDHC_Type *base, sdhc_data_bus_width_t width)
{
base->PROCTL = ((base->PROCTL & ~SDHC_PROCTL_DTW_MASK) | SDHC_PROCTL_DTW(width));
}
/*!
* @brief Sets the card transfer-related configuration.
*
* This function fills the card transfer-related command argument/transfer flag/data size. The command and data are sent
by
* SDHC after calling this function.
*
* Example:
@code
sdhc_transfer_config_t transferConfig;
transferConfig.dataBlockSize = 512U;
transferConfig.dataBlockCount = 2U;
transferConfig.commandArgument = 0x01AAU;
transferConfig.commandIndex = 8U;
transferConfig.flags |= (kSDHC_EnableDmaFlag | kSDHC_EnableAutoCommand12Flag | kSDHC_MultipleBlockFlag);
SDHC_SetTransferConfig(SDHC, &transferConfig);
@endcode
*
* @param base SDHC peripheral base address.
* @param config Command configuration structure.
*/
void SDHC_SetTransferConfig(SDHC_Type *base, const sdhc_transfer_config_t *config);
/*!
* @brief Gets the command response.
*
* @param base SDHC peripheral base address.
* @param index The index of response register, range from 0 to 3.
* @return Response register transfer.
*/
static inline uint32_t SDHC_GetCommandResponse(SDHC_Type *base, uint32_t index)
{
assert(index < 4U);
return base->CMDRSP[index];
}
/*!
* @brief Fills the the data port.
*
* This function is used to implement the data transfer by Data Port instead of DMA.
*
* @param base SDHC peripheral base address.
* @param data The data about to be sent.
*/
static inline void SDHC_WriteData(SDHC_Type *base, uint32_t data)
{
base->DATPORT = data;
}
/*!
* @brief Retrieves the data from the data port.
*
* This function is used to implement the data transfer by Data Port instead of DMA.
*
* @param base SDHC peripheral base address.
* @return The data has been read.
*/
static inline uint32_t SDHC_ReadData(SDHC_Type *base)
{
return base->DATPORT;
}
/*!
* @brief Enables or disables a wakeup event in low-power mode.
*
* @param base SDHC peripheral base address.
* @param mask Wakeup events mask(_sdhc_wakeup_event).
* @param enable True to enable, false to disable.
*/
static inline void SDHC_EnableWakeupEvent(SDHC_Type *base, uint32_t mask, bool enable)
{
if (enable)
{
base->PROCTL |= mask;
}
else
{
base->PROCTL &= ~mask;
}
}
/*!
* @brief Enables or disables the card detection level for testing.
*
* @param base SDHC peripheral base address.
* @param enable True to enable, false to disable.
*/
static inline void SDHC_EnableCardDetectTest(SDHC_Type *base, bool enable)
{
if (enable)
{
base->PROCTL |= SDHC_PROCTL_CDSS_MASK;
}
else
{
base->PROCTL &= ~SDHC_PROCTL_CDSS_MASK;
}
}
/*!
* @brief Sets the card detection test level.
*
* This function sets the card detection test level to indicate whether the card is inserted into the SDHC when DAT[3]/
* CD pin is selected as a card detection pin. This function can also assert the pin logic when DAT[3]/CD pin is
* selected
* as the card detection pin.
*
* @param base SDHC peripheral base address.
* @param high True to set the card detect level to high.
*/
static inline void SDHC_SetCardDetectTestLevel(SDHC_Type *base, bool high)
{
if (high)
{
base->PROCTL |= SDHC_PROCTL_CDTL_MASK;
}
else
{
base->PROCTL &= ~SDHC_PROCTL_CDTL_MASK;
}
}
/*!
* @brief Enables or disables the SDIO card control.
*
* @param base SDHC peripheral base address.
* @param mask SDIO card control flags mask(_sdhc_sdio_control_flag).
* @param enable True to enable, false to disable.
*/
void SDHC_EnableSdioControl(SDHC_Type *base, uint32_t mask, bool enable);
/*!
* @brief Restarts a transaction which has stopped at the block GAP for the SDIO card.
*
* @param base SDHC peripheral base address.
*/
static inline void SDHC_SetContinueRequest(SDHC_Type *base)
{
base->PROCTL |= SDHC_PROCTL_CREQ_MASK;
}
/*!
* @brief Configures the MMC boot feature.
*
* Example:
@code
sdhc_boot_config_t config;
config.ackTimeoutCount = 4;
config.bootMode = kSDHC_BootModeNormal;
config.blockCount = 5;
config.enableBootAck = true;
config.enableBoot = true;
config.enableAutoStopAtBlockGap = true;
SDHC_SetMmcBootConfig(SDHC, &config);
@endcode
*
* @param base SDHC peripheral base address.
* @param config The MMC boot configuration information.
*/
void SDHC_SetMmcBootConfig(SDHC_Type *base, const sdhc_boot_config_t *config);
/*!
* @brief Forces generating events according to the given mask.
*
* @param base SDHC peripheral base address.
* @param mask The force events mask(_sdhc_force_event).
*/
static inline void SDHC_SetForceEvent(SDHC_Type *base, uint32_t mask)
{
base->FEVT = mask;
}
/* @} */
/*!
* @name Transactional
* @{
*/
/*!
* @brief Transfers the command/data using a blocking method.
*
* This function waits until the command response/data is received or the SDHC encounters an error by polling the status
* flag.
* This function support non word align data addr transfer support, if data buffer addr is not align in DMA mode,
* the API will continue finish the transfer by polling IO directly
* The application must not call this API in multiple threads at the same time. Because of that this API doesn't support
* the re-entry mechanism.
*
* @note There is no need to call the API 'SDHC_TransferCreateHandle' when calling this API.
*
* @param base SDHC peripheral base address.
* @param admaTable ADMA table address, can't be null if transfer way is ADMA1/ADMA2.
* @param admaTableWords ADMA table length united as words, can't be 0 if transfer way is ADMA1/ADMA2.
* @param transfer Transfer content.
* @retval kStatus_InvalidArgument Argument is invalid.
* @retval kStatus_SDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed.
* @retval kStatus_SDHC_SendCommandFailed Send command failed.
* @retval kStatus_SDHC_TransferDataFailed Transfer data failed.
* @retval kStatus_Success Operate successfully.
*/
status_t SDHC_TransferBlocking(SDHC_Type *base,
uint32_t *admaTable,
uint32_t admaTableWords,
sdhc_transfer_t *transfer);
/*!
* @brief Creates the SDHC handle.
*
* @param base SDHC peripheral base address.
* @param handle SDHC handle pointer.
* @param callback Structure pointer to contain all callback functions.
* @param userData Callback function parameter.
*/
void SDHC_TransferCreateHandle(SDHC_Type *base,
sdhc_handle_t *handle,
const sdhc_transfer_callback_t *callback,
void *userData);
/*!
* @brief Transfers the command/data using an interrupt and an asynchronous method.
*
* This function sends a command and data and returns immediately. It doesn't wait the transfer complete or encounter an
* error.
* This function support non word align data addr transfer support, if data buffer addr is not align in DMA mode,
* the API will continue finish the transfer by polling IO directly
* The application must not call this API in multiple threads at the same time. Because of that this API doesn't support
* the re-entry mechanism.
*
* @note Call the API 'SDHC_TransferCreateHandle' when calling this API.
*
* @param base SDHC peripheral base address.
* @param handle SDHC handle.
* @param admaTable ADMA table address, can't be null if transfer way is ADMA1/ADMA2.
* @param admaTableWords ADMA table length united as words, can't be 0 if transfer way is ADMA1/ADMA2.
* @param transfer Transfer content.
* @retval kStatus_InvalidArgument Argument is invalid.
* @retval kStatus_SDHC_BusyTransferring Busy transferring.
* @retval kStatus_SDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed.
* @retval kStatus_Success Operate successfully.
*/
status_t SDHC_TransferNonBlocking(
SDHC_Type *base, sdhc_handle_t *handle, uint32_t *admaTable, uint32_t admaTableWords, sdhc_transfer_t *transfer);
/*!
* @brief IRQ handler for the SDHC.
*
* This function deals with the IRQs on the given host controller.
*
* @param base SDHC peripheral base address.
* @param handle SDHC handle.
*/
void SDHC_TransferHandleIRQ(SDHC_Type *base, sdhc_handle_t *handle);
/* @} */
#if defined(__cplusplus)
}
#endif
/*! @} */
#endif /* _FSL_SDHC_H_*/