rt-thread/bsp/frdm-k64f/device/MK64F12/fsl_llwu.h

321 lines
11 KiB
C

/*
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_LLWU_H_
#define _FSL_LLWU_H_
#include "fsl_common.h"
/*! @addtogroup llwu */
/*! @{ */
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief LLWU driver version 2.0.1. */
#define FSL_LLWU_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
/*@}*/
/*!
* @brief External input pin control modes
*/
typedef enum _llwu_external_pin_mode
{
kLLWU_ExternalPinDisable = 0U, /*!< Pin disabled as a wakeup input. */
kLLWU_ExternalPinRisingEdge = 1U, /*!< Pin enabled with the rising edge detection. */
kLLWU_ExternalPinFallingEdge = 2U, /*!< Pin enabled with the falling edge detection.*/
kLLWU_ExternalPinAnyEdge = 3U /*!< Pin enabled with any change detection. */
} llwu_external_pin_mode_t;
/*!
* @brief Digital filter control modes
*/
typedef enum _llwu_pin_filter_mode
{
kLLWU_PinFilterDisable = 0U, /*!< Filter disabled. */
kLLWU_PinFilterRisingEdge = 1U, /*!< Filter positive edge detection.*/
kLLWU_PinFilterFallingEdge = 2U, /*!< Filter negative edge detection.*/
kLLWU_PinFilterAnyEdge = 3U /*!< Filter any edge detection. */
} llwu_pin_filter_mode_t;
#if (defined(FSL_FEATURE_LLWU_HAS_VERID) && FSL_FEATURE_LLWU_HAS_VERID)
/*!
* @brief IP version ID definition.
*/
typedef struct _llwu_version_id
{
uint16_t feature; /*!< A feature specification number. */
uint8_t minor; /*!< The minor version number. */
uint8_t major; /*!< The major version number. */
} llwu_version_id_t;
#endif /* FSL_FEATURE_LLWU_HAS_VERID */
#if (defined(FSL_FEATURE_LLWU_HAS_PARAM) && FSL_FEATURE_LLWU_HAS_PARAM)
/*!
* @brief IP parameter definition.
*/
typedef struct _llwu_param
{
uint8_t filters; /*!< A number of the pin filter. */
uint8_t dmas; /*!< A number of the wakeup DMA. */
uint8_t modules; /*!< A number of the wakeup module. */
uint8_t pins; /*!< A number of the wake up pin. */
} llwu_param_t;
#endif /* FSL_FEATURE_LLWU_HAS_PARAM */
#if (defined(FSL_FEATURE_LLWU_HAS_PIN_FILTER) && FSL_FEATURE_LLWU_HAS_PIN_FILTER)
/*!
* @brief An external input pin filter control structure
*/
typedef struct _llwu_external_pin_filter_mode
{
uint32_t pinIndex; /*!< A pin number */
llwu_pin_filter_mode_t filterMode; /*!< Filter mode */
} llwu_external_pin_filter_mode_t;
#endif /* FSL_FEATURE_LLWU_HAS_PIN_FILTER */
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @name Low-Leakage Wakeup Unit Control APIs
* @{
*/
#if (defined(FSL_FEATURE_LLWU_HAS_VERID) && FSL_FEATURE_LLWU_HAS_VERID)
/*!
* @brief Gets the LLWU version ID.
*
* This function gets the LLWU version ID, including the major version number,
* the minor version number, and the feature specification number.
*
* @param base LLWU peripheral base address.
* @param versionId A pointer to the version ID structure.
*/
static inline void LLWU_GetVersionId(LLWU_Type *base, llwu_version_id_t *versionId)
{
*((uint32_t *)versionId) = base->VERID;
}
#endif /* FSL_FEATURE_LLWU_HAS_VERID */
#if (defined(FSL_FEATURE_LLWU_HAS_PARAM) && FSL_FEATURE_LLWU_HAS_PARAM)
/*!
* @brief Gets the LLWU parameter.
*
* This function gets the LLWU parameter, including a wakeup pin number, a module
* number, a DMA number, and a pin filter number.
*
* @param base LLWU peripheral base address.
* @param param A pointer to the LLWU parameter structure.
*/
static inline void LLWU_GetParam(LLWU_Type *base, llwu_param_t *param)
{
*((uint32_t *)param) = base->PARAM;
}
#endif /* FSL_FEATURE_LLWU_HAS_PARAM */
#if (defined(FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN) && FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN)
/*!
* @brief Sets the external input pin source mode.
*
* This function sets the external input pin source mode that is used
* as a wake up source.
*
* @param base LLWU peripheral base address.
* @param pinIndex A pin index to be enabled as an external wakeup source starting from 1.
* @param pinMode A pin configuration mode defined in the llwu_external_pin_modes_t.
*/
void LLWU_SetExternalWakeupPinMode(LLWU_Type *base, uint32_t pinIndex, llwu_external_pin_mode_t pinMode);
/*!
* @brief Gets the external wakeup source flag.
*
* This function checks the external pin flag to detect whether the MCU is
* woken up by the specific pin.
*
* @param base LLWU peripheral base address.
* @param pinIndex A pin index, which starts from 1.
* @return True if the specific pin is a wakeup source.
*/
bool LLWU_GetExternalWakeupPinFlag(LLWU_Type *base, uint32_t pinIndex);
/*!
* @brief Clears the external wakeup source flag.
*
* This function clears the external wakeup source flag for a specific pin.
*
* @param base LLWU peripheral base address.
* @param pinIndex A pin index, which starts from 1.
*/
void LLWU_ClearExternalWakeupPinFlag(LLWU_Type *base, uint32_t pinIndex);
#endif /* FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN */
#if (defined(FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE) && FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE)
/*!
* @brief Enables/disables the internal module source.
*
* This function enables/disables the internal module source mode that is used
* as a wake up source.
*
* @param base LLWU peripheral base address.
* @param moduleIndex A module index to be enabled as an internal wakeup source starting from 1.
* @param enable An enable or a disable setting
*/
static inline void LLWU_EnableInternalModuleInterruptWakup(LLWU_Type *base, uint32_t moduleIndex, bool enable)
{
if (enable)
{
base->ME |= 1U << moduleIndex;
}
else
{
base->ME &= ~(1U << moduleIndex);
}
}
/*!
* @brief Gets the external wakeup source flag.
*
* This function checks the external pin flag to detect whether the system is
* woken up by the specific pin.
*
* @param base LLWU peripheral base address.
* @param moduleIndex A module index, which starts from 1.
* @return True if the specific pin is a wake up source.
*/
static inline bool LLWU_GetInternalWakeupModuleFlag(LLWU_Type *base, uint32_t moduleIndex)
{
#if (defined(FSL_FEATURE_LLWU_HAS_MF) && FSL_FEATURE_LLWU_HAS_MF)
#if (defined(FSL_FEATURE_LLWU_REG_BITWIDTH) && (FSL_FEATURE_LLWU_REG_BITWIDTH == 32))
return (bool)(base->MF & (1U << moduleIndex));
#else
return (bool)(base->MF5 & (1U << moduleIndex));
#endif /* FSL_FEATURE_LLWU_REG_BITWIDTH */
#else
#if (defined(FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN) && (FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN > 16))
return (bool)(base->F5 & (1U << moduleIndex));
#else
#if (defined(FSL_FEATURE_LLWU_HAS_PF) && FSL_FEATURE_LLWU_HAS_PF)
return (bool)(base->PF3 & (1U << moduleIndex));
#else
return (bool)(base->F3 & (1U << moduleIndex));
#endif /* FSL_FEATURE_LLWU_HAS_PF */
#endif /* FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN */
#endif /* FSL_FEATURE_LLWU_HAS_MF */
}
#endif /* FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE */
#if (defined(FSL_FEATURE_LLWU_HAS_DMA_ENABLE_REG) && FSL_FEATURE_LLWU_HAS_DMA_ENABLE_REG)
/*!
* @brief Enables/disables the internal module DMA wakeup source.
*
* This function enables/disables the internal DMA that is used as a wake up source.
*
* @param base LLWU peripheral base address.
* @param moduleIndex An internal module index which is used as a DMA request source, starting from 1.
* @param enable Enable or disable the DMA request source
*/
static inline void LLWU_EnableInternalModuleDmaRequestWakup(LLWU_Type *base, uint32_t moduleIndex, bool enable)
{
if (enable)
{
base->DE |= 1U << moduleIndex;
}
else
{
base->DE &= ~(1U << moduleIndex);
}
}
#endif /* FSL_FEATURE_LLWU_HAS_DMA_ENABLE_REG */
#if (defined(FSL_FEATURE_LLWU_HAS_PIN_FILTER) && FSL_FEATURE_LLWU_HAS_PIN_FILTER)
/*!
* @brief Sets the pin filter configuration.
*
* This function sets the pin filter configuration.
*
* @param base LLWU peripheral base address.
* @param filterIndex A pin filter index used to enable/disable the digital filter, starting from 1.
* @param filterMode A filter mode configuration
*/
void LLWU_SetPinFilterMode(LLWU_Type *base, uint32_t filterIndex, llwu_external_pin_filter_mode_t filterMode);
/*!
* @brief Gets the pin filter configuration.
*
* This function gets the pin filter flag.
*
* @param base LLWU peripheral base address.
* @param filterIndex A pin filter index, which starts from 1.
* @return True if the flag is a source of the existing low-leakage power mode.
*/
bool LLWU_GetPinFilterFlag(LLWU_Type *base, uint32_t filterIndex);
/*!
* @brief Clears the pin filter configuration.
*
* This function clears the pin filter flag.
*
* @param base LLWU peripheral base address.
* @param filterIndex A pin filter index to clear the flag, starting from 1.
*/
void LLWU_ClearPinFilterFlag(LLWU_Type *base, uint32_t filterIndex);
#endif /* FSL_FEATURE_LLWU_HAS_PIN_FILTER */
#if (defined(FSL_FEATURE_LLWU_HAS_RESET_ENABLE) && FSL_FEATURE_LLWU_HAS_RESET_ENABLE)
/*!
* @brief Sets the reset pin mode.
*
* This function determines how the reset pin is used as a low leakage mode exit source.
*
* @param pinEnable Enable reset the pin filter
* @param pinFilterEnable Specify whether the pin filter is enabled in Low-Leakage power mode.
*/
void LLWU_SetResetPinMode(LLWU_Type *base, bool pinEnable, bool enableInLowLeakageMode);
#endif /* FSL_FEATURE_LLWU_HAS_RESET_ENABLE */
/*@}*/
#if defined(__cplusplus)
}
#endif
/*! @}*/
#endif /* _FSL_LLWU_H_*/