382 lines
11 KiB
C
382 lines
11 KiB
C
//*****************************************************************************
|
|
//
|
|
// am_hal_tpiu.c
|
|
//! @file
|
|
//!
|
|
//! @brief Support functions for the ARM TPIU module
|
|
//!
|
|
//! Provides support functions for configuring the ARM TPIU module
|
|
//!
|
|
//! @addtogroup tpiu2 Trace Port Interface Unit (TPIU)
|
|
//! @ingroup apollo2hal
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Copyright (c) 2017, Ambiq Micro
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions are met:
|
|
//
|
|
// 1. Redistributions of source code must retain the above copyright notice,
|
|
// this list of conditions and the following disclaimer.
|
|
//
|
|
// 2. Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the distribution.
|
|
//
|
|
// 3. Neither the name of the copyright holder nor the names of its
|
|
// contributors may be used to endorse or promote products derived from this
|
|
// software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
// POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 1.2.9 of the AmbiqSuite Development Package.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "am_mcu_apollo.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enable the clock to the TPIU module.
|
|
//!
|
|
//! This function enables the clock to the TPIU module.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_tpiu_clock_enable(void)
|
|
{
|
|
//
|
|
// Enable the TPIU clock
|
|
//
|
|
AM_REG(MCUCTRL, TPIUCTRL) |= AM_REG_MCUCTRL_TPIUCTRL_ENABLE_M;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disable the clock to the TPIU module.
|
|
//!
|
|
//! This function disables the clock to the TPIU module.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_tpiu_clock_disable(void)
|
|
{
|
|
//
|
|
// Disable the TPIU clock
|
|
//
|
|
AM_REG(MCUCTRL, TPIUCTRL) &= ~AM_REG_MCUCTRL_TPIUCTRL_ENABLE_M;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Set the output port width of the TPIU
|
|
//!
|
|
//! @param ui32PortWidth - The desired port width (in bits)
|
|
//!
|
|
//! This function uses the TPIU_CSPSR register to set the desired output port
|
|
//! width of the TPIU.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_tpiu_port_width_set(uint32_t ui32PortWidth)
|
|
{
|
|
AM_REG(TPIU, CSPSR) = 1 << (ui32PortWidth - 1);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Read the supported_output port width of the TPIU
|
|
//!
|
|
//! This function uses the \e TPIU_SSPSR register to set the supported output
|
|
//! port widths of the TPIU.
|
|
//!
|
|
//! @return Current width of the TPIU output port
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_tpiu_supported_port_width_get(void)
|
|
{
|
|
uint32_t i, ui32WidthValue;
|
|
|
|
//
|
|
// Read the supported width register.
|
|
//
|
|
ui32WidthValue = AM_REG(TPIU, SSPSR);
|
|
|
|
//
|
|
// The register value is encoded in a one-hot format, so the position of
|
|
// the single set bit determines the actual width of the port.
|
|
//
|
|
for (i = 1; i < 32; i++)
|
|
{
|
|
//
|
|
// Check each bit for a '1'. When we find it, our current loop index
|
|
// will be equal to the port width.
|
|
//
|
|
if (ui32WidthValue == (0x1 << (i - 1)))
|
|
{
|
|
return i;
|
|
}
|
|
}
|
|
|
|
//
|
|
// We should never get here, but if we do, just return the smallest
|
|
// possible value for a supported trace port width.
|
|
//
|
|
return 1;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Read the output port width of the TPIU
|
|
//!
|
|
//! This function uses the \e TPIU_CSPSR register to set the desired output
|
|
//! port width of the TPIU.
|
|
//!
|
|
//! @return Current width of the TPIU output port
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
am_hal_tpiu_port_width_get(void)
|
|
{
|
|
uint32_t ui32Temp;
|
|
uint32_t ui32Width;
|
|
|
|
ui32Width = 1;
|
|
ui32Temp = AM_REG(TPIU, CSPSR);
|
|
|
|
while ( !(ui32Temp & 1) )
|
|
{
|
|
ui32Temp = ui32Temp >> 1;
|
|
ui32Width++;
|
|
|
|
if (ui32Width > 32)
|
|
{
|
|
ui32Width = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
//
|
|
// Current width of the TPIU output port.
|
|
//
|
|
return ui32Width;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Configure the TPIU based on the values in the configuration struct.
|
|
//!
|
|
//! @param psConfig - pointer to an am_hal_tpiu_config_t structure containing
|
|
//! the desired configuration information.
|
|
//!
|
|
//! This function reads the provided configuration structure, and sets the
|
|
//! relevant TPIU registers to achieve the desired configuration.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_tpiu_configure(am_hal_tpiu_config_t *psConfig)
|
|
{
|
|
//
|
|
// Set the clock freq in the MCUCTRL register.
|
|
//
|
|
AM_REG(MCUCTRL, TPIUCTRL) |= psConfig->ui32TraceClkIn;
|
|
|
|
//
|
|
// Set the desired protocol.
|
|
//
|
|
AM_REG(TPIU, SPPR) = psConfig->ui32PinProtocol;
|
|
|
|
//
|
|
// Set the parallel port width. This may be redundant if the user has
|
|
// selected a serial protocol, but we'll set it anyway.
|
|
//
|
|
AM_REG(TPIU, CSPSR) = (1 << (psConfig->ui32ParallelPortSize - 1));
|
|
|
|
//
|
|
// Set the clock prescaler.
|
|
//
|
|
AM_REG(TPIU, ACPR) = psConfig->ui32ClockPrescaler;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Enables the TPIU
|
|
//!
|
|
//! This function enables the ARM TPIU by setting the TPIU registers and then
|
|
//! enabling the TPIU clock source in MCU control register.
|
|
//!
|
|
//! @param psConfig - structure for configuration.
|
|
//! If ui32SetItmBaud, the other structure members are used to set the
|
|
//! TPIU configuration.
|
|
//! But for simplicity, ui32SetItmBaud can be set to one of the
|
|
//! following, in which case all other structure members are ignored.
|
|
//! In this case, the given BAUD rate is based on a div-by-8 HFRC clock.
|
|
//! AM_HAL_TPIU_BAUD_57600
|
|
//! AM_HAL_TPIU_BAUD_115200
|
|
//! AM_HAL_TPIU_BAUD_230400
|
|
//! AM_HAL_TPIU_BAUD_460800
|
|
//! AM_HAL_TPIU_BAUD_500000
|
|
//! AM_HAL_TPIU_BAUD_1M
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_tpiu_enable(am_hal_tpiu_config_t *psConfig)
|
|
{
|
|
uint32_t ui32HFRC, ui32SWOscaler, ui32ITMbitrate;
|
|
|
|
ui32ITMbitrate = psConfig->ui32SetItmBaud;
|
|
|
|
//
|
|
// TPIU formatter & flush control register.
|
|
//
|
|
AM_REG(TPIU, FFCR) = 0;
|
|
|
|
if ( ui32ITMbitrate )
|
|
{
|
|
//
|
|
// Set the Current Parallel Port Size (note - only 1 bit can be set).
|
|
//
|
|
AM_REG(TPIU, CSPSR) = AM_REG_TPIU_CSPSR_CWIDTH_1BIT;
|
|
|
|
//
|
|
// Use some default assumptions to set the ITM frequency.
|
|
//
|
|
if ( (ui32ITMbitrate < AM_HAL_TPIU_BAUD_57600 ) ||
|
|
(ui32ITMbitrate > AM_HAL_TPIU_BAUD_2M ) )
|
|
{
|
|
ui32ITMbitrate = AM_HAL_TPIU_BAUD_DEFAULT;
|
|
}
|
|
|
|
//
|
|
// Get the current HFRC frequency.
|
|
//
|
|
ui32HFRC = am_hal_clkgen_sysclk_get();
|
|
|
|
//
|
|
// Compute the SWO scaler value.
|
|
//
|
|
if ( ui32HFRC != 0xFFFFFFFF )
|
|
{
|
|
ui32SWOscaler = ((ui32HFRC / 8) / ui32ITMbitrate) - 1;
|
|
}
|
|
else
|
|
{
|
|
ui32SWOscaler = ( (AM_HAL_CLKGEN_FREQ_MAX_HZ / 8) /
|
|
AM_HAL_TPIU_BAUD_DEFAULT ) - 1;
|
|
}
|
|
|
|
//
|
|
// Set the scaler value.
|
|
//
|
|
AM_REG(TPIU, ACPR) = AM_REG_TPIU_ACPR_SWOSCALER(ui32SWOscaler);
|
|
|
|
//
|
|
// Set for UART mode
|
|
//
|
|
AM_REG(TPIU, SPPR) = AM_REG_TPIU_SPPR_TXMODE_UART;
|
|
|
|
//
|
|
// Make sure we are not in test mode (important for proper deep sleep
|
|
// operation).
|
|
//
|
|
AM_REG(TPIU, ITCTRL) = AM_REG_TPIU_ITCTRL_MODE_NORMAL;
|
|
|
|
//
|
|
// Enable the TPIU clock source in MCU control.
|
|
// Set TPIU clock for HFRC/8 (6 or 3 MHz) operation.
|
|
//
|
|
AM_REGn(MCUCTRL, 0, TPIUCTRL) =
|
|
AM_REG_MCUCTRL_TPIUCTRL_CLKSEL_HFRC_DIV_8 |
|
|
AM_REG_MCUCTRL_TPIUCTRL_ENABLE_EN;
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Set the configuration according to the structure values.
|
|
//
|
|
|
|
//
|
|
// Set the Asynchronous Clock Prescaler Register.
|
|
//
|
|
AM_REG(TPIU, ACPR) = psConfig->ui32ClockPrescaler;
|
|
|
|
//
|
|
// Set the Selected Pin Protocol Register.
|
|
// e.g. AM_REG_TPIU_SPPR_TXMODE_UART
|
|
//
|
|
AM_REG(TPIU, SPPR) = psConfig->ui32PinProtocol;
|
|
|
|
//
|
|
// Set the Current Parallel Port Size (note - only 1 bit can be set).
|
|
// This may be redundant if the user has selected a serial protocol,
|
|
// but we'll set it anyway.
|
|
//
|
|
AM_REG(TPIU, CSPSR) = (1 << (psConfig->ui32ParallelPortSize - 1));
|
|
|
|
//
|
|
// Set the clock freq in the MCUCTRL register.
|
|
//
|
|
AM_REG(MCUCTRL, TPIUCTRL) |= psConfig->ui32TraceClkIn;
|
|
}
|
|
|
|
//
|
|
// Wait for 50us for the data to flush out.
|
|
//
|
|
am_hal_itm_delay_us(50);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! @brief Disables the TPIU
|
|
//!
|
|
//! This function disables the ARM TPIU by disabling the TPIU clock source
|
|
//! in MCU control register.
|
|
//!
|
|
//! @return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
am_hal_tpiu_disable(void)
|
|
{
|
|
//
|
|
// Disable the TPIU clock source in MCU control.
|
|
//
|
|
AM_REG(MCUCTRL, TPIUCTRL) = AM_REG_MCUCTRL_TPIUCTRL_CLKSEL_0MHz |
|
|
AM_REG_MCUCTRL_TPIUCTRL_ENABLE_DIS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// End Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|