1383 lines
50 KiB
C
1383 lines
50 KiB
C
/*
|
|
* Copyright 2017-2020 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
|
|
#include "fsl_semc.h"
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
|
|
/* Component ID definition, used by tools. */
|
|
#ifndef FSL_COMPONENT_ID
|
|
#define FSL_COMPONENT_ID "platform.drivers.semc"
|
|
#endif
|
|
|
|
/*! @brief Define macros for SEMC driver. */
|
|
#define SEMC_IPCOMMANDDATASIZEBYTEMAX (4U)
|
|
#define SEMC_IPCOMMANDMAGICKEY (0xA55A)
|
|
#if defined(FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT) && (FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT > 0x01U)
|
|
#define SEMC_IOCR_PINMUXBITWIDTH (0x4UL)
|
|
#else
|
|
#define SEMC_IOCR_PINMUXBITWIDTH (0x3UL)
|
|
#endif /* FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT */
|
|
#define SEMC_IOCR_NAND_CE (4UL)
|
|
#define SEMC_IOCR_NOR_CE (5UL)
|
|
#define SEMC_IOCR_NOR_CE_A8 (2UL)
|
|
#define SEMC_IOCR_PSRAM_CE (6UL)
|
|
#define SEMC_IOCR_PSRAM_CE_A8 (3UL)
|
|
#define SEMC_IOCR_DBI_CSX (7UL)
|
|
#define SEMC_IOCR_DBI_CSX_A8 (4UL)
|
|
#define SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHBASE (24U)
|
|
#define SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHMAX (28U)
|
|
#define SEMC_BMCR0_TYPICAL_WQOS (5U)
|
|
#define SEMC_BMCR0_TYPICAL_WAGE (8U)
|
|
#define SEMC_BMCR0_TYPICAL_WSH (0x40U)
|
|
#define SEMC_BMCR0_TYPICAL_WRWS (0x10U)
|
|
#define SEMC_BMCR1_TYPICAL_WQOS (5U)
|
|
#define SEMC_BMCR1_TYPICAL_WAGE (8U)
|
|
#define SEMC_BMCR1_TYPICAL_WPH (0x60U)
|
|
#define SEMC_BMCR1_TYPICAL_WBR (0x40U)
|
|
#define SEMC_BMCR1_TYPICAL_WRWS (0x24U)
|
|
#define SEMC_STARTADDRESS (0x80000000UL)
|
|
#define SEMC_ENDADDRESS (0xDFFFFFFFUL)
|
|
#define SEMC_BR_MEMSIZE_MIN (4U)
|
|
#define SEMC_BR_MEMSIZE_OFFSET (2U)
|
|
#define SEMC_BR_MEMSIZE_MAX (4UL * 1024UL * 1024UL)
|
|
#define SEMC_SDRAM_MODESETCAL_OFFSET (4U)
|
|
#define SEMC_BR_REG_NUM (9U)
|
|
#define SEMC_BYTE_NUMBIT (8U)
|
|
/*******************************************************************************
|
|
* Prototypes
|
|
******************************************************************************/
|
|
/*!
|
|
* @brief Get instance number for SEMC module.
|
|
*
|
|
* @param base SEMC peripheral base address
|
|
*/
|
|
static uint32_t SEMC_GetInstance(SEMC_Type *base);
|
|
|
|
/*!
|
|
* @brief Covert the input memory size to internal register set value.
|
|
*
|
|
* @param base SEMC peripheral base address
|
|
* @param size_kbytes SEMC memory size in unit of kbytes.
|
|
* @param sizeConverted SEMC converted memory size to 0 ~ 0x1F.
|
|
* @return Execution status.
|
|
*/
|
|
static status_t SEMC_CovertMemorySize(SEMC_Type *base, uint32_t size_kbytes, uint8_t *sizeConverted);
|
|
|
|
/*!
|
|
* @brief Covert the external timing nanosecond to internal clock cycle.
|
|
*
|
|
* @param time_ns SEMC external time interval in unit of nanosecond.
|
|
* @param clkSrc_Hz SEMC clock source frequency.
|
|
* @return The changed internal clock cycle.
|
|
*/
|
|
static uint8_t SEMC_ConvertTiming(uint32_t time_ns, uint32_t clkSrc_Hz);
|
|
|
|
/*!
|
|
* @brief Configure IP command.
|
|
*
|
|
* @param base SEMC peripheral base address.
|
|
* @param size_bytes SEMC IP command data size.
|
|
* @return Execution status.
|
|
*/
|
|
static status_t SEMC_ConfigureIPCommand(SEMC_Type *base, uint8_t size_bytes);
|
|
|
|
/*!
|
|
* @brief Check if the IP command has finished.
|
|
*
|
|
* @param base SEMC peripheral base address.
|
|
* @return Execution status.
|
|
*/
|
|
static status_t SEMC_IsIPCommandDone(SEMC_Type *base);
|
|
|
|
/*******************************************************************************
|
|
* Variables
|
|
******************************************************************************/
|
|
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/*! @brief Pointers to SEMC clocks for each instance. */
|
|
static const clock_ip_name_t s_semcClock[FSL_FEATURE_SOC_SEMC_COUNT] = SEMC_CLOCKS;
|
|
#if (defined(SEMC_EXSC_CLOCKS))
|
|
static const clock_ip_name_t s_semcExtClock[FSL_FEATURE_SOC_SEMC_COUNT] = SEMC_EXSC_CLOCKS;
|
|
#endif /* SEMC_EXSC_CLOCKS */
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
|
|
/*! @brief Pointers to SEMC bases for each instance. */
|
|
static SEMC_Type *const s_semcBases[] = SEMC_BASE_PTRS;
|
|
/*******************************************************************************
|
|
* Code
|
|
******************************************************************************/
|
|
static uint32_t SEMC_GetInstance(SEMC_Type *base)
|
|
{
|
|
uint32_t instance;
|
|
|
|
/* Find the instance index from base address mappings. */
|
|
for (instance = 0; instance < ARRAY_SIZE(s_semcBases); instance++)
|
|
{
|
|
if (s_semcBases[instance] == base)
|
|
{
|
|
break;
|
|
}
|
|
}
|
|
|
|
assert(instance < ARRAY_SIZE(s_semcBases));
|
|
|
|
return instance;
|
|
}
|
|
|
|
static status_t SEMC_CovertMemorySize(SEMC_Type *base, uint32_t size_kbytes, uint8_t *sizeConverted)
|
|
{
|
|
assert(sizeConverted != NULL);
|
|
uint32_t memsize;
|
|
status_t status = kStatus_Success;
|
|
|
|
if ((size_kbytes < SEMC_BR_MEMSIZE_MIN) || (size_kbytes > SEMC_BR_MEMSIZE_MAX))
|
|
{
|
|
status = kStatus_SEMC_InvalidMemorySize;
|
|
}
|
|
else
|
|
{
|
|
*sizeConverted = 0U;
|
|
memsize = size_kbytes / 8U;
|
|
while (memsize != 0x00U)
|
|
{
|
|
memsize >>= 1U;
|
|
(*sizeConverted)++;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static uint8_t SEMC_ConvertTiming(uint32_t time_ns, uint32_t clkSrc_Hz)
|
|
{
|
|
assert(clkSrc_Hz != 0x00U);
|
|
|
|
uint8_t clockCycles = 0;
|
|
uint32_t tClk_ps;
|
|
|
|
clkSrc_Hz /= 1000000U;
|
|
/* Using ps for high resolution */
|
|
tClk_ps = 1000000U / clkSrc_Hz;
|
|
|
|
while (tClk_ps * clockCycles < time_ns * 1000U)
|
|
{
|
|
clockCycles++;
|
|
}
|
|
|
|
return (clockCycles == 0x00U) ? clockCycles : (clockCycles - 0x01U);
|
|
}
|
|
|
|
static status_t SEMC_ConfigureIPCommand(SEMC_Type *base, uint8_t size_bytes)
|
|
{
|
|
status_t status = kStatus_Success;
|
|
|
|
if ((size_bytes > SEMC_IPCOMMANDDATASIZEBYTEMAX) || (size_bytes == 0x00U))
|
|
{
|
|
status = kStatus_SEMC_InvalidIpcmdDataSize;
|
|
}
|
|
else
|
|
{
|
|
/* Set data size. */
|
|
/* Note: It is better to set data size as the device data port width when transferring
|
|
* device command data. But for device memory data transfer, it can be set freely.
|
|
* Note: If the data size is greater than data port width, for example, datsz = 4, data port = 16bit,
|
|
* then the 4-byte data transfer will be split into two 2-byte transfers, the slave address
|
|
* will be switched automatically according to connected device type*/
|
|
base->IPCR1 = SEMC_IPCR1_DATSZ(size_bytes);
|
|
/* Clear data size. */
|
|
base->IPCR2 = 0;
|
|
/* Set data size. */
|
|
if (size_bytes < 4U)
|
|
{
|
|
base->IPCR2 |= SEMC_IPCR2_BM3_MASK;
|
|
}
|
|
if (size_bytes < 3U)
|
|
{
|
|
base->IPCR2 |= SEMC_IPCR2_BM2_MASK;
|
|
}
|
|
if (size_bytes < 2U)
|
|
{
|
|
base->IPCR2 |= SEMC_IPCR2_BM1_MASK;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static status_t SEMC_IsIPCommandDone(SEMC_Type *base)
|
|
{
|
|
status_t status = kStatus_Success;
|
|
|
|
/* Poll status bit till command is done*/
|
|
while ((base->INTR & (uint32_t)SEMC_INTR_IPCMDDONE_MASK) == 0x00U)
|
|
{
|
|
};
|
|
|
|
/* Clear status bit */
|
|
base->INTR |= SEMC_INTR_IPCMDDONE_MASK;
|
|
|
|
/* Check error status */
|
|
if ((base->INTR & (uint32_t)SEMC_INTR_IPCMDERR_MASK) != 0x00U)
|
|
{
|
|
base->INTR |= SEMC_INTR_IPCMDERR_MASK;
|
|
status = kStatus_SEMC_IpCommandExecutionError;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/*!
|
|
* brief Gets the SEMC default basic configuration structure.
|
|
*
|
|
* The purpose of this API is to get the default SEMC
|
|
* configure structure for SEMC_Init(). User may use the initialized
|
|
* structure unchanged in SEMC_Init(), or modify some fields of the
|
|
* structure before calling SEMC_Init().
|
|
* Example:
|
|
code
|
|
semc_config_t config;
|
|
SEMC_GetDefaultConfig(&config);
|
|
endcode
|
|
* param config The SEMC configuration structure pointer.
|
|
*/
|
|
void SEMC_GetDefaultConfig(semc_config_t *config)
|
|
{
|
|
assert(config != NULL);
|
|
|
|
/* Initializes the configure structure to zero. */
|
|
(void)memset(config, 0, sizeof(*config));
|
|
|
|
config->queueWeight.queueaEnable = true;
|
|
semc_queuea_weight_struct_t *queueaWeight = &(config->queueWeight.queueaWeight.queueaConfig);
|
|
config->queueWeight.queuebEnable = true;
|
|
semc_queueb_weight_struct_t *queuebWeight = &(config->queueWeight.queuebWeight.queuebConfig);
|
|
|
|
/* Get default settings. */
|
|
config->dqsMode = kSEMC_Loopbackinternal;
|
|
config->cmdTimeoutCycles = 0xFF;
|
|
config->busTimeoutCycles = 0x1F;
|
|
|
|
queueaWeight->qos = SEMC_BMCR0_TYPICAL_WQOS;
|
|
queueaWeight->aging = SEMC_BMCR0_TYPICAL_WAGE;
|
|
queueaWeight->slaveHitSwith = SEMC_BMCR0_TYPICAL_WSH;
|
|
queueaWeight->slaveHitNoswitch = SEMC_BMCR0_TYPICAL_WRWS;
|
|
queuebWeight->qos = SEMC_BMCR1_TYPICAL_WQOS;
|
|
queuebWeight->aging = SEMC_BMCR1_TYPICAL_WAGE;
|
|
queuebWeight->slaveHitSwith = SEMC_BMCR1_TYPICAL_WRWS;
|
|
queuebWeight->weightPagehit = SEMC_BMCR1_TYPICAL_WPH;
|
|
queuebWeight->bankRotation = SEMC_BMCR1_TYPICAL_WBR;
|
|
}
|
|
|
|
/*!
|
|
* brief Initializes SEMC.
|
|
* This function ungates the SEMC clock and initializes SEMC.
|
|
* This function must be called before calling any other SEMC driver functions.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param configure The SEMC configuration structure pointer.
|
|
*/
|
|
void SEMC_Init(SEMC_Type *base, semc_config_t *configure)
|
|
{
|
|
assert(configure != NULL);
|
|
|
|
uint8_t index = 0;
|
|
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/* Un-gate sdram controller clock. */
|
|
CLOCK_EnableClock(s_semcClock[SEMC_GetInstance(base)]);
|
|
#if (defined(SEMC_EXSC_CLOCKS))
|
|
CLOCK_EnableClock(s_semcExtClock[SEMC_GetInstance(base)]);
|
|
#endif /* SEMC_EXSC_CLOCKS */
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
|
|
/* Initialize all BR to zero due to the default base address set. */
|
|
for (index = 0; index < SEMC_BR_REG_NUM; index++)
|
|
{
|
|
base->BR[index] = 0;
|
|
}
|
|
|
|
/* Software reset for SEMC internal logical . */
|
|
base->MCR = SEMC_MCR_SWRST_MASK;
|
|
while ((base->MCR & (uint32_t)SEMC_MCR_SWRST_MASK) != 0x00U)
|
|
{
|
|
}
|
|
|
|
/* Configure, disable module first. */
|
|
base->MCR |= SEMC_MCR_MDIS_MASK | SEMC_MCR_BTO(configure->busTimeoutCycles) |
|
|
SEMC_MCR_CTO(configure->cmdTimeoutCycles) | SEMC_MCR_DQSMD(configure->dqsMode);
|
|
|
|
if (configure->queueWeight.queueaEnable == true)
|
|
{
|
|
/* Configure Queue A for AXI bus access to SDRAM, NAND, NOR, SRAM and DBI slaves.*/
|
|
base->BMCR0 = (uint32_t)(configure->queueWeight.queueaWeight.queueaValue);
|
|
}
|
|
else
|
|
{
|
|
base->BMCR0 = 0x00U;
|
|
}
|
|
|
|
if (configure->queueWeight.queuebEnable == true)
|
|
{
|
|
/* Configure Queue B for AXI bus access to SDRAM slave. */
|
|
base->BMCR1 = (uint32_t)(configure->queueWeight.queuebWeight.queuebValue);
|
|
}
|
|
else
|
|
{
|
|
base->BMCR1 = 0x00U;
|
|
}
|
|
|
|
/* Enable SEMC. */
|
|
base->MCR &= ~SEMC_MCR_MDIS_MASK;
|
|
}
|
|
|
|
/*!
|
|
* brief Deinitializes the SEMC module and gates the clock.
|
|
* This function gates the SEMC clock. As a result, the SEMC
|
|
* module doesn't work after calling this function.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
*/
|
|
void SEMC_Deinit(SEMC_Type *base)
|
|
{
|
|
/* Disable module. Check there is no pending command before disable module. */
|
|
while ((base->STS0 & (uint32_t)SEMC_STS0_IDLE_MASK) == 0x00U)
|
|
{
|
|
;
|
|
}
|
|
|
|
base->MCR |= SEMC_MCR_MDIS_MASK | SEMC_MCR_SWRST_MASK;
|
|
|
|
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
|
|
/* Disable SDRAM clock. */
|
|
CLOCK_DisableClock(s_semcClock[SEMC_GetInstance(base)]);
|
|
#if (defined(SEMC_EXSC_CLOCKS))
|
|
CLOCK_DisableClock(s_semcExtClock[SEMC_GetInstance(base)]);
|
|
#endif /* SEMC_EXSC_CLOCKS */
|
|
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
|
|
}
|
|
|
|
/*!
|
|
* brief Configures SDRAM controller in SEMC.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param cs The chip selection.
|
|
* param config The sdram configuration.
|
|
* param clkSrc_Hz The SEMC clock frequency.
|
|
*/
|
|
status_t SEMC_ConfigureSDRAM(SEMC_Type *base, semc_sdram_cs_t cs, semc_sdram_config_t *config, uint32_t clkSrc_Hz)
|
|
{
|
|
assert(config != NULL);
|
|
assert(clkSrc_Hz > 0x00U);
|
|
assert(config->refreshBurstLen > 0x00U);
|
|
|
|
uint8_t memsize;
|
|
status_t result = kStatus_Success;
|
|
uint16_t prescale = (uint16_t)(config->tPrescalePeriod_Ns / 16U / (1000000000U / clkSrc_Hz));
|
|
uint32_t refresh;
|
|
uint32_t urgentRef;
|
|
uint32_t idle;
|
|
uint32_t mode;
|
|
uint32_t timing;
|
|
|
|
if ((config->address < SEMC_STARTADDRESS) || (config->address > SEMC_ENDADDRESS))
|
|
{
|
|
return kStatus_SEMC_InvalidBaseAddress;
|
|
}
|
|
|
|
if (config->csxPinMux == kSEMC_MUXA8)
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
|
|
if (prescale > 256U)
|
|
{
|
|
return kStatus_SEMC_InvalidTimerSetting;
|
|
}
|
|
|
|
refresh = config->refreshPeriod_nsPerRow / config->tPrescalePeriod_Ns;
|
|
urgentRef = config->refreshUrgThreshold / config->tPrescalePeriod_Ns;
|
|
idle = config->tIdleTimeout_Ns / config->tPrescalePeriod_Ns;
|
|
|
|
uint32_t iocReg = base->IOCR & (~(SEMC_IOCR_PINMUXBITWIDTH << (uint32_t)config->csxPinMux));
|
|
|
|
/* Base control. */
|
|
result = SEMC_CovertMemorySize(base, config->memsize_kbytes, &memsize);
|
|
if (result != kStatus_Success)
|
|
{
|
|
return result;
|
|
}
|
|
|
|
base->BR[cs] = (config->address & SEMC_BR_BA_MASK) | SEMC_BR_MS(memsize) | SEMC_BR_VLD_MASK;
|
|
|
|
#if defined(FSL_FEATURE_SEMC_SDRAM_SUPPORT_COLUMN_ADDRESS_8BIT) && (FSL_FEATURE_SEMC_SDRAM_SUPPORT_COLUMN_ADDRESS_8BIT)
|
|
if (kSEMC_SdramColunm_8bit == config->columnAddrBitNum)
|
|
{
|
|
base->SDRAMCR0 = SEMC_SDRAMCR0_PS(config->portSize) | SEMC_SDRAMCR0_BL(config->burstLen) |
|
|
SEMC_SDRAMCR0_COL8(true) | SEMC_SDRAMCR0_CL(config->casLatency);
|
|
}
|
|
else
|
|
#endif /* FSL_FEATURE_SEMC_SDRAM_SUPPORT_COLUMN_ADDRESS_8BIT */
|
|
{
|
|
base->SDRAMCR0 = SEMC_SDRAMCR0_PS(config->portSize) | SEMC_SDRAMCR0_BL(config->burstLen) |
|
|
SEMC_SDRAMCR0_COL(config->columnAddrBitNum) | SEMC_SDRAMCR0_CL(config->casLatency);
|
|
}
|
|
|
|
/* IOMUX setting. */
|
|
if (cs != kSEMC_SDRAM_CS0)
|
|
{
|
|
base->IOCR = iocReg | ((uint32_t)cs << (uint32_t)config->csxPinMux);
|
|
}
|
|
|
|
base->IOCR &= ~SEMC_IOCR_MUX_A8_MASK;
|
|
|
|
#if defined(FSL_FEATURE_SEMC_HAS_DELAY_CHAIN_CONTROL) && (FSL_FEATURE_SEMC_HAS_DELAY_CHAIN_CONTROL)
|
|
uint32_t tempDelayChain = base->DCCR;
|
|
|
|
tempDelayChain &= ~(SEMC_DCCR_SDRAMVAL_MASK | SEMC_DCCR_SDRAMEN_MASK);
|
|
/* Configure delay chain. */
|
|
base->DCCR = tempDelayChain | SEMC_DCCR_SDRAMVAL((uint32_t)config->delayChain - 0x01U) | SEMC_DCCR_SDRAMEN_MASK;
|
|
#endif /* FSL_FEATURE_SEMC_HAS_DELAY_CHAIN_CONTROL */
|
|
|
|
timing = SEMC_SDRAMCR1_PRE2ACT(SEMC_ConvertTiming(config->tPrecharge2Act_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SDRAMCR1_ACT2RW(SEMC_ConvertTiming(config->tAct2ReadWrite_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SDRAMCR1_RFRC(SEMC_ConvertTiming(config->tRefreshRecovery_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SDRAMCR1_WRC(SEMC_ConvertTiming(config->tWriteRecovery_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SDRAMCR1_CKEOFF(SEMC_ConvertTiming(config->tCkeOff_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SDRAMCR1_ACT2PRE(SEMC_ConvertTiming(config->tAct2Prechage_Ns, clkSrc_Hz));
|
|
/* SDRAMCR1 timing setting. */
|
|
base->SDRAMCR1 = timing;
|
|
|
|
timing = SEMC_SDRAMCR2_SRRC(SEMC_ConvertTiming(config->tSelfRefRecovery_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SDRAMCR2_REF2REF(SEMC_ConvertTiming(config->tRefresh2Refresh_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SDRAMCR2_ACT2ACT(SEMC_ConvertTiming(config->tAct2Act_Ns, clkSrc_Hz)) | SEMC_SDRAMCR2_ITO(idle);
|
|
/* SDRAMCR2 timing setting. */
|
|
base->SDRAMCR2 = timing;
|
|
|
|
/* SDRAMCR3 timing setting. */
|
|
base->SDRAMCR3 = SEMC_SDRAMCR3_REBL((uint32_t)config->refreshBurstLen - 1UL) |
|
|
/* N * 16 * 1s / clkSrc_Hz = config->tPrescalePeriod_Ns */
|
|
SEMC_SDRAMCR3_PRESCALE(prescale) | SEMC_SDRAMCR3_RT(refresh - 1UL) | SEMC_SDRAMCR3_UT(urgentRef);
|
|
|
|
SEMC->IPCR1 = 0x2U;
|
|
SEMC->IPCR2 = 0U;
|
|
|
|
result =
|
|
SEMC_SendIPCommand(base, kSEMC_MemType_SDRAM, config->address, (uint32_t)kSEMC_SDRAMCM_Prechargeall, 0, NULL);
|
|
if (result != kStatus_Success)
|
|
{
|
|
return result;
|
|
}
|
|
result =
|
|
SEMC_SendIPCommand(base, kSEMC_MemType_SDRAM, config->address, (uint32_t)kSEMC_SDRAMCM_AutoRefresh, 0, NULL);
|
|
if (result != kStatus_Success)
|
|
{
|
|
return result;
|
|
}
|
|
result =
|
|
SEMC_SendIPCommand(base, kSEMC_MemType_SDRAM, config->address, (uint32_t)kSEMC_SDRAMCM_AutoRefresh, 0, NULL);
|
|
if (result != kStatus_Success)
|
|
{
|
|
return result;
|
|
}
|
|
/* Mode setting value. */
|
|
mode = (uint32_t)config->burstLen | (((uint32_t)config->casLatency) << SEMC_SDRAM_MODESETCAL_OFFSET);
|
|
result =
|
|
SEMC_SendIPCommand(base, kSEMC_MemType_SDRAM, config->address, (uint32_t)kSEMC_SDRAMCM_Modeset, mode, NULL);
|
|
if (result != kStatus_Success)
|
|
{
|
|
return result;
|
|
}
|
|
/* Enables refresh */
|
|
base->SDRAMCR3 |= SEMC_SDRAMCR3_REN_MASK;
|
|
|
|
return kStatus_Success;
|
|
}
|
|
|
|
/*!
|
|
* brief Configures NAND controller in SEMC.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param config The nand configuration.
|
|
* param clkSrc_Hz The SEMC clock frequency.
|
|
*/
|
|
status_t SEMC_ConfigureNAND(SEMC_Type *base, semc_nand_config_t *config, uint32_t clkSrc_Hz)
|
|
{
|
|
assert(config != NULL);
|
|
assert(config->timingConfig != NULL);
|
|
|
|
uint8_t memsize;
|
|
status_t result;
|
|
uint32_t timing;
|
|
|
|
if ((config->axiAddress < SEMC_STARTADDRESS) || (config->axiAddress > SEMC_ENDADDRESS))
|
|
{
|
|
return kStatus_SEMC_InvalidBaseAddress;
|
|
}
|
|
|
|
if (config->cePinMux == kSEMC_MUXRDY)
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
|
|
/* Disable SEMC module during configuring control registers. */
|
|
base->MCR |= SEMC_MCR_MDIS_MASK;
|
|
|
|
uint32_t iocReg =
|
|
base->IOCR & (~((SEMC_IOCR_PINMUXBITWIDTH << (uint32_t)config->cePinMux) | SEMC_IOCR_MUX_RDY_MASK));
|
|
|
|
/* Base control. */
|
|
if (config->rdyactivePolarity == kSEMC_RdyActivehigh)
|
|
{
|
|
base->MCR |= SEMC_MCR_WPOL1_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->MCR &= ~SEMC_MCR_WPOL1_MASK;
|
|
}
|
|
result = SEMC_CovertMemorySize(base, config->axiMemsize_kbytes, &memsize);
|
|
if (result != kStatus_Success)
|
|
{
|
|
return result;
|
|
}
|
|
base->BR[4] = (config->axiAddress & SEMC_BR_BA_MASK) | SEMC_BR_MS(memsize) | SEMC_BR_VLD_MASK;
|
|
|
|
result = SEMC_CovertMemorySize(base, config->ipgMemsize_kbytes, &memsize);
|
|
if (result != kStatus_Success)
|
|
{
|
|
return result;
|
|
}
|
|
base->BR[8] = (config->ipgAddress & SEMC_BR_BA_MASK) | SEMC_BR_MS(memsize) | SEMC_BR_VLD_MASK;
|
|
|
|
/* IOMUX setting. */
|
|
if ((uint32_t)config->cePinMux != 0x00U)
|
|
{
|
|
base->IOCR = iocReg | (SEMC_IOCR_NAND_CE << (uint32_t)config->cePinMux);
|
|
}
|
|
else
|
|
{
|
|
base->IOCR = iocReg | (1UL << (uint32_t)config->cePinMux);
|
|
}
|
|
|
|
base->NANDCR0 = SEMC_NANDCR0_PS(config->portSize) | SEMC_NANDCR0_BL(config->burstLen) |
|
|
SEMC_NANDCR0_EDO(config->edoModeEnabled) | SEMC_NANDCR0_COL(config->columnAddrBitNum);
|
|
|
|
timing = SEMC_NANDCR1_CES(SEMC_ConvertTiming(config->timingConfig->tCeSetup_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NANDCR1_CEH(SEMC_ConvertTiming(config->timingConfig->tCeHold_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NANDCR1_WEL(SEMC_ConvertTiming(config->timingConfig->tWeLow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NANDCR1_WEH(SEMC_ConvertTiming(config->timingConfig->tWeHigh_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NANDCR1_REL(SEMC_ConvertTiming(config->timingConfig->tReLow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NANDCR1_REH(SEMC_ConvertTiming(config->timingConfig->tReHigh_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NANDCR1_TA(SEMC_ConvertTiming(config->timingConfig->tTurnAround_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NANDCR1_CEITV(SEMC_ConvertTiming(config->timingConfig->tCeInterval_Ns, clkSrc_Hz));
|
|
/* NANDCR1 timing setting. */
|
|
base->NANDCR1 = timing;
|
|
|
|
timing = SEMC_NANDCR2_TWHR(SEMC_ConvertTiming(config->timingConfig->tWehigh2Relow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NANDCR2_TRHW(SEMC_ConvertTiming(config->timingConfig->tRehigh2Welow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NANDCR2_TADL(SEMC_ConvertTiming(config->timingConfig->tAle2WriteStart_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NANDCR2_TRR(SEMC_ConvertTiming(config->timingConfig->tReady2Relow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NANDCR2_TWB(SEMC_ConvertTiming(config->timingConfig->tWehigh2Busy_Ns, clkSrc_Hz));
|
|
|
|
/* NANDCR2 timing setting. */
|
|
base->NANDCR2 = timing;
|
|
|
|
/* NANDCR3 timing setting. */
|
|
base->NANDCR3 = (uint32_t)config->arrayAddrOption;
|
|
|
|
/* Enables SEMC module after configuring control registers completely. */
|
|
base->MCR &= ~SEMC_MCR_MDIS_MASK;
|
|
|
|
return kStatus_Success;
|
|
}
|
|
|
|
/*!
|
|
* brief Configures NOR controller in SEMC.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param config The nor configuration.
|
|
* param clkSrc_Hz The SEMC clock frequency.
|
|
*/
|
|
status_t SEMC_ConfigureNOR(SEMC_Type *base, semc_nor_config_t *config, uint32_t clkSrc_Hz)
|
|
{
|
|
assert(config != NULL);
|
|
|
|
uint8_t memsize;
|
|
status_t result;
|
|
uint32_t timing;
|
|
|
|
if ((config->address < SEMC_STARTADDRESS) || (config->address > SEMC_ENDADDRESS))
|
|
{
|
|
return kStatus_SEMC_InvalidBaseAddress;
|
|
}
|
|
|
|
uint32_t iocReg = base->IOCR & (~(SEMC_IOCR_PINMUXBITWIDTH << (uint32_t)config->cePinMux));
|
|
uint32_t muxCe = (config->cePinMux == kSEMC_MUXRDY) ?
|
|
(SEMC_IOCR_NOR_CE - 1U) :
|
|
((config->cePinMux == kSEMC_MUXA8) ? SEMC_IOCR_NOR_CE_A8 : SEMC_IOCR_NOR_CE);
|
|
|
|
/* IOMUX setting. */
|
|
base->IOCR = iocReg | (muxCe << (uint32_t)config->cePinMux);
|
|
/* Address bit setting. */
|
|
if (config->addrPortWidth > SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHBASE)
|
|
{
|
|
if (config->addrPortWidth >= (SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHBASE + 1U))
|
|
{
|
|
/* Address bit 24 (A24) */
|
|
base->IOCR &= ~(uint32_t)SEMC_IOCR_MUX_CSX0_MASK;
|
|
if (config->cePinMux == kSEMC_MUXCSX0)
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
}
|
|
if (config->addrPortWidth >= (SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHBASE + 2U))
|
|
{
|
|
/* Address bit 25 (A25) */
|
|
base->IOCR &= ~(uint32_t)SEMC_IOCR_MUX_CSX1_MASK;
|
|
if (config->cePinMux == kSEMC_MUXCSX1)
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
}
|
|
if (config->addrPortWidth >= (SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHBASE + 3U))
|
|
{
|
|
/* Address bit 26 (A26) */
|
|
base->IOCR &= ~(uint32_t)SEMC_IOCR_MUX_CSX2_MASK;
|
|
if (config->cePinMux == kSEMC_MUXCSX2)
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
}
|
|
if (config->addrPortWidth >= (SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHBASE + 4U))
|
|
{
|
|
if (config->addr27 == kSEMC_NORA27_MUXCSX3)
|
|
{
|
|
/* Address bit 27 (A27) */
|
|
base->IOCR &= ~(uint32_t)SEMC_IOCR_MUX_CSX3_MASK;
|
|
}
|
|
else if (config->addr27 == kSEMC_NORA27_MUXRDY)
|
|
{
|
|
base->IOCR |= SEMC_IOCR_MUX_RDY_MASK;
|
|
}
|
|
else
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
if (config->cePinMux == kSEMC_MUXCSX3)
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
}
|
|
if (config->addrPortWidth > SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHMAX)
|
|
{
|
|
return kStatus_SEMC_InvalidAddressPortWidth;
|
|
}
|
|
}
|
|
|
|
/* Base control. */
|
|
if (config->rdyactivePolarity == kSEMC_RdyActivehigh)
|
|
{
|
|
base->MCR |= SEMC_MCR_WPOL0_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->MCR &= ~SEMC_MCR_WPOL0_MASK;
|
|
}
|
|
result = SEMC_CovertMemorySize(base, config->memsize_kbytes, &memsize);
|
|
if (result != kStatus_Success)
|
|
{
|
|
return result;
|
|
}
|
|
base->BR[5] = (config->address & SEMC_BR_BA_MASK) | SEMC_BR_MS(memsize) | SEMC_BR_VLD_MASK;
|
|
base->NORCR0 = SEMC_NORCR0_PS(config->portSize) | SEMC_NORCR0_BL(config->burstLen) |
|
|
SEMC_NORCR0_AM(config->addrMode) | SEMC_NORCR0_ADVP(config->advActivePolarity) |
|
|
SEMC_NORCR0_COL(config->columnAddrBitNum);
|
|
|
|
#if defined(FSL_FEATURE_SEMC_HAS_DELAY_CHAIN_CONTROL) && (FSL_FEATURE_SEMC_HAS_DELAY_CHAIN_CONTROL)
|
|
uint32_t tempDelayChain = base->DCCR;
|
|
|
|
tempDelayChain &= ~(SEMC_DCCR_NORVAL_MASK | SEMC_DCCR_NOREN_MASK);
|
|
/* Configure delay chain. */
|
|
base->DCCR = tempDelayChain | SEMC_DCCR_NORVAL((uint32_t)config->delayChain - 0x01U) | SEMC_DCCR_NOREN_MASK;
|
|
#endif /* FSL_FEATURE_SEMC_HAS_DELAY_CHAIN_CONTROL */
|
|
|
|
timing = SEMC_NORCR1_CES(SEMC_ConvertTiming(config->tCeSetup_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NORCR1_CEH(SEMC_ConvertTiming(config->tCeHold_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NORCR1_AS(SEMC_ConvertTiming(config->tAddrSetup_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NORCR1_AH(SEMC_ConvertTiming(config->tAddrHold_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NORCR1_WEL(SEMC_ConvertTiming(config->tWeLow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NORCR1_WEH(SEMC_ConvertTiming(config->tWeHigh_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NORCR1_REL(SEMC_ConvertTiming(config->tReLow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NORCR1_REH(SEMC_ConvertTiming(config->tReHigh_Ns, clkSrc_Hz));
|
|
|
|
/* NORCR1 timing setting. */
|
|
base->NORCR1 = timing;
|
|
|
|
timing = SEMC_NORCR2_CEITV(SEMC_ConvertTiming(config->tCeInterval_Ns, clkSrc_Hz));
|
|
#if defined(FSL_FEATURE_SEMC_HAS_NOR_WDS_TIME) && (FSL_FEATURE_SEMC_HAS_NOR_WDS_TIME)
|
|
timing |= SEMC_NORCR2_WDS(SEMC_ConvertTiming(config->tWriteSetup_Ns, clkSrc_Hz));
|
|
#endif /* FSL_FEATURE_SEMC_HAS_NOR_WDS_TIME */
|
|
#if defined(FSL_FEATURE_SEMC_HAS_NOR_WDH_TIME) && (FSL_FEATURE_SEMC_HAS_NOR_WDH_TIME)
|
|
timing |= SEMC_NORCR2_WDH(SEMC_ConvertTiming(config->tWriteHold_Ns, clkSrc_Hz));
|
|
#endif /* FSL_FEATURE_SEMC_HAS_NOR_WDH_TIME */
|
|
timing |= SEMC_NORCR2_TA(SEMC_ConvertTiming(config->tTurnAround_Ns, clkSrc_Hz));
|
|
timing |= SEMC_NORCR2_AWDH((uint32_t)SEMC_ConvertTiming(config->tAddr2WriteHold_Ns, clkSrc_Hz) + 0x01UL);
|
|
#if defined(FSL_FEATURE_SEMC_HAS_NOR_LC_TIME) && (FSL_FEATURE_SEMC_HAS_NOR_LC_TIME)
|
|
timing |= SEMC_NORCR2_LC(config->latencyCount);
|
|
#endif
|
|
#if defined(FSL_FEATURE_SEMC_HAS_NOR_RD_TIME) && (FSL_FEATURE_SEMC_HAS_NOR_RD_TIME)
|
|
timing |= SEMC_NORCR2_RD((uint32_t)config->readCycle - 0x01UL);
|
|
#endif
|
|
|
|
/* NORCR2 timing setting. */
|
|
base->NORCR2 = timing;
|
|
|
|
return SEMC_ConfigureIPCommand(base, ((uint8_t)config->portSize + 1U));
|
|
}
|
|
|
|
/*!
|
|
* brief Configures SRAM controller in SEMC, which can be used only for specific chip selection CS0.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param config The sram configuration.
|
|
* param clkSrc_Hz The SEMC clock frequency.
|
|
*/
|
|
status_t SEMC_ConfigureSRAM(SEMC_Type *base, semc_sram_config_t *config, uint32_t clkSrc_Hz)
|
|
{
|
|
return SEMC_ConfigureSRAMWithChipSelection(base, kSEMC_SRAM_CS0, config, clkSrc_Hz);
|
|
}
|
|
|
|
/*!
|
|
* brief Configures SRAM controller in SEMC, which can be used up to four chip selections CS0/CS1/CS2/CS3..
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param cs The chip selection.
|
|
* param config The sram configuration.
|
|
* param clkSrc_Hz The SEMC clock frequency.
|
|
*/
|
|
status_t SEMC_ConfigureSRAMWithChipSelection(SEMC_Type *base,
|
|
semc_sram_cs_t cs,
|
|
semc_sram_config_t *config,
|
|
uint32_t clkSrc_Hz)
|
|
{
|
|
assert(config != NULL);
|
|
|
|
uint32_t tempBRVal;
|
|
uint32_t timing;
|
|
uint8_t memsize;
|
|
status_t result = kStatus_Success;
|
|
|
|
if ((config->address < SEMC_STARTADDRESS) || (config->address > SEMC_ENDADDRESS))
|
|
{
|
|
return kStatus_SEMC_InvalidBaseAddress;
|
|
}
|
|
|
|
uint32_t iocReg = base->IOCR & (~(SEMC_IOCR_PINMUXBITWIDTH << (uint32_t)config->cePinMux));
|
|
|
|
uint32_t muxCe = (config->cePinMux == kSEMC_MUXRDY) ?
|
|
(SEMC_IOCR_PSRAM_CE - 1U) :
|
|
((config->cePinMux == kSEMC_MUXA8) ? SEMC_IOCR_PSRAM_CE_A8 : SEMC_IOCR_PSRAM_CE);
|
|
|
|
/* IOMUX setting. */
|
|
base->IOCR = iocReg | (muxCe << (uint32_t)config->cePinMux);
|
|
/* Address bit setting. */
|
|
if (config->addrPortWidth > SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHBASE)
|
|
{
|
|
if (config->addrPortWidth >= (SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHBASE + 1U))
|
|
{
|
|
/* Address bit 24 (A24) */
|
|
base->IOCR &= ~(uint32_t)SEMC_IOCR_MUX_CSX0_MASK;
|
|
if (config->cePinMux == kSEMC_MUXCSX0)
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
}
|
|
if (config->addrPortWidth >= (SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHBASE + 2U))
|
|
{
|
|
/* Address bit 25 (A25) */
|
|
base->IOCR &= ~(uint32_t)SEMC_IOCR_MUX_CSX1_MASK;
|
|
if (config->cePinMux == kSEMC_MUXCSX1)
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
}
|
|
if (config->addrPortWidth >= (SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHBASE + 3U))
|
|
{
|
|
/* Address bit 26 (A26) */
|
|
base->IOCR &= ~(uint32_t)SEMC_IOCR_MUX_CSX2_MASK;
|
|
if (config->cePinMux == kSEMC_MUXCSX2)
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
}
|
|
if (config->addrPortWidth >= (SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHBASE + 4U))
|
|
{
|
|
if (config->addr27 == kSEMC_NORA27_MUXCSX3)
|
|
{
|
|
/* Address bit 27 (A27) */
|
|
base->IOCR &= ~(uint32_t)SEMC_IOCR_MUX_CSX3_MASK;
|
|
}
|
|
else if (config->addr27 == kSEMC_NORA27_MUXRDY)
|
|
{
|
|
base->IOCR |= SEMC_IOCR_MUX_RDY_MASK;
|
|
}
|
|
else
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
|
|
if (config->cePinMux == kSEMC_MUXCSX3)
|
|
{
|
|
return kStatus_SEMC_InvalidSwPinmuxSelection;
|
|
}
|
|
}
|
|
if (config->addrPortWidth > SEMC_NORFLASH_SRAM_ADDR_PORTWIDTHMAX)
|
|
{
|
|
return kStatus_SEMC_InvalidAddressPortWidth;
|
|
}
|
|
}
|
|
/* Base control. */
|
|
result = SEMC_CovertMemorySize(base, config->memsize_kbytes, &memsize);
|
|
if (result != kStatus_Success)
|
|
{
|
|
return result;
|
|
}
|
|
|
|
tempBRVal = (config->address & SEMC_BR_BA_MASK) | SEMC_BR_MS(memsize) | SEMC_BR_VLD_MASK;
|
|
|
|
uint32_t tempCtrlVal;
|
|
|
|
switch (cs)
|
|
{
|
|
case kSEMC_SRAM_CS0:
|
|
base->BR[6] = tempBRVal;
|
|
break;
|
|
#if defined(FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT) && (FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT > 0x01U)
|
|
case kSEMC_SRAM_CS1:
|
|
base->BR9 = tempBRVal;
|
|
break;
|
|
case kSEMC_SRAM_CS2:
|
|
base->BR10 = tempBRVal;
|
|
break;
|
|
case kSEMC_SRAM_CS3:
|
|
base->BR11 = tempBRVal;
|
|
break;
|
|
#endif /* FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT */
|
|
default:
|
|
assert(NULL);
|
|
break;
|
|
}
|
|
|
|
/* PSRAM0 SRAMCRx timing setting. */
|
|
if (kSEMC_SRAM_CS0 == cs)
|
|
{
|
|
#if defined(FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT) && (FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT > 0x01U)
|
|
/* Ready/wait(WAITEN and WAITSP) feature is only for async mode. */
|
|
if (kSEMC_AsyncMode == config->syncMode)
|
|
{
|
|
tempCtrlVal = SEMC_SRAMCR0_PS(config->portSize) |
|
|
#if defined(SEMC_SRAMCR4_SYNCEN_MASK) && (SEMC_SRAMCR4_SYNCEN_MASK)
|
|
SEMC_SRAMCR4_SYNCEN(config->syncMode) |
|
|
#endif /* SEMC_SRAMCR4_SYNCEN_MASK */
|
|
#if defined(SEMC_SRAMCR0_WAITEN_MASK) && (SEMC_SRAMCR0_WAITEN_MASK)
|
|
SEMC_SRAMCR0_WAITEN(config->waitEnable) |
|
|
#endif /* SEMC_SRAMCR0_WAITEN_MASK */
|
|
#if defined(SEMC_SRAMCR0_WAITSP_MASK) && (SEMC_SRAMCR0_WAITSP_MASK)
|
|
SEMC_SRAMCR0_WAITSP(config->waitSample) |
|
|
#endif /* SEMC_SRAMCR0_WAITSP_MASK */
|
|
SEMC_SRAMCR0_BL(config->burstLen) | SEMC_SRAMCR0_AM(config->addrMode) |
|
|
SEMC_SRAMCR0_ADVP(config->advActivePolarity) |
|
|
#if defined(SEMC_SRAMCR4_ADVH_MASK) && (SEMC_SRAMCR4_ADVH_MASK)
|
|
SEMC_SRAMCR4_ADVH(config->advLevelCtrl) |
|
|
#endif /* SEMC_SRAMCR4_ADVH_MASK */
|
|
SEMC_SRAMCR0_COL_MASK;
|
|
}
|
|
else
|
|
#endif /* FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT */
|
|
{
|
|
tempCtrlVal = SEMC_SRAMCR0_PS(config->portSize) |
|
|
#if defined(SEMC_SRAMCR4_SYNCEN_MASK) && (SEMC_SRAMCR4_SYNCEN_MASK)
|
|
SEMC_SRAMCR4_SYNCEN(config->syncMode) |
|
|
#endif /* SEMC_SRAMCR4_SYNCEN_MASK */
|
|
SEMC_SRAMCR0_BL(config->burstLen) | SEMC_SRAMCR0_AM(config->addrMode) |
|
|
SEMC_SRAMCR0_ADVP(config->advActivePolarity) |
|
|
#if defined(SEMC_SRAMCR4_ADVH_MASK) && (SEMC_SRAMCR4_ADVH_MASK)
|
|
SEMC_SRAMCR4_ADVH(config->advLevelCtrl) |
|
|
#endif /* SEMC_SRAMCR4_ADVH_MASK */
|
|
SEMC_SRAMCR0_COL_MASK;
|
|
}
|
|
|
|
base->SRAMCR0 = tempCtrlVal;
|
|
}
|
|
#if defined(FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT) && (FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT > 0x01U)
|
|
/* PSRAM1~PSRAM3 SRAMCRx timing setting. */
|
|
else
|
|
{
|
|
/* Ready/wait(WAITEN and WAITSP) feature is only for async mode. */
|
|
if (kSEMC_AsyncMode == config->syncMode)
|
|
{
|
|
tempCtrlVal = SEMC_SRAMCR4_PS(config->portSize) | SEMC_SRAMCR4_SYNCEN(config->syncMode) |
|
|
SEMC_SRAMCR4_WAITEN(config->waitEnable) | SEMC_SRAMCR4_WAITSP(config->waitSample) |
|
|
SEMC_SRAMCR4_BL(config->burstLen) | SEMC_SRAMCR4_AM(config->addrMode) |
|
|
SEMC_SRAMCR4_ADVP(config->advActivePolarity) | SEMC_SRAMCR4_ADVH(config->advLevelCtrl) |
|
|
SEMC_SRAMCR4_COL_MASK;
|
|
}
|
|
else
|
|
{
|
|
tempCtrlVal = SEMC_SRAMCR4_PS(config->portSize) | SEMC_SRAMCR4_SYNCEN(config->syncMode) |
|
|
SEMC_SRAMCR4_BL(config->burstLen) | SEMC_SRAMCR4_AM(config->addrMode) |
|
|
SEMC_SRAMCR4_ADVP(config->advActivePolarity) | SEMC_SRAMCR4_ADVH(config->advLevelCtrl) |
|
|
SEMC_SRAMCR4_COL_MASK;
|
|
}
|
|
|
|
base->SRAMCR4 = tempCtrlVal;
|
|
}
|
|
#endif /* FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT */
|
|
|
|
#if defined(FSL_FEATURE_SEMC_HAS_DELAY_CHAIN_CONTROL) && (FSL_FEATURE_SEMC_HAS_DELAY_CHAIN_CONTROL)
|
|
uint32_t tempDelayChain = base->DCCR;
|
|
|
|
/* Configure delay chain. */
|
|
switch (cs)
|
|
{
|
|
case kSEMC_SRAM_CS0:
|
|
tempDelayChain &= ~(SEMC_DCCR_SRAM0VAL_MASK | SEMC_DCCR_SRAM0EN_MASK);
|
|
base->DCCR =
|
|
tempDelayChain | SEMC_DCCR_SRAM0VAL((uint32_t)config->delayChain - 0x01U) | SEMC_DCCR_SRAM0EN_MASK;
|
|
break;
|
|
#if defined(FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT) && (FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT > 0x01U)
|
|
case kSEMC_SRAM_CS1:
|
|
SUPPRESS_FALL_THROUGH_WARNING();
|
|
case kSEMC_SRAM_CS2:
|
|
SUPPRESS_FALL_THROUGH_WARNING();
|
|
case kSEMC_SRAM_CS3:
|
|
tempDelayChain &= ~(SEMC_DCCR_SRAMXVAL_MASK | SEMC_DCCR_SRAMXEN_MASK);
|
|
base->DCCR =
|
|
tempDelayChain | SEMC_DCCR_SRAMXVAL((uint32_t)config->delayChain - 0x01U) | SEMC_DCCR_SRAMXEN_MASK;
|
|
break;
|
|
#endif /* FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT */
|
|
default:
|
|
assert(NULL);
|
|
break;
|
|
}
|
|
#endif /* FSL_FEATURE_SEMC_HAS_DELAY_CHAIN_CONTROL */
|
|
|
|
if (kSEMC_SRAM_CS0 == cs)
|
|
{
|
|
timing = SEMC_SRAMCR1_CES(SEMC_ConvertTiming(config->tCeSetup_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR1_CEH(SEMC_ConvertTiming(config->tCeHold_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR1_AS(SEMC_ConvertTiming(config->tAddrSetup_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR1_AH(SEMC_ConvertTiming(config->tAddrHold_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR1_WEL(SEMC_ConvertTiming(config->tWeLow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR1_WEH(SEMC_ConvertTiming(config->tWeHigh_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR1_REL(SEMC_ConvertTiming(config->tReLow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR1_REH(SEMC_ConvertTiming(config->tReHigh_Ns, clkSrc_Hz));
|
|
|
|
/* SRAMCR1 timing setting. */
|
|
base->SRAMCR1 = timing;
|
|
|
|
timing = 0x00U;
|
|
#if defined(FSL_FEATURE_SEMC_HAS_SRAM_WDS_TIME) && (FSL_FEATURE_SEMC_HAS_SRAM_WDS_TIME)
|
|
timing |= SEMC_SRAMCR2_WDS(SEMC_ConvertTiming(config->tWriteSetup_Ns, clkSrc_Hz));
|
|
#endif
|
|
#if defined(FSL_FEATURE_SEMC_HAS_SRAM_WDH_TIME) && (FSL_FEATURE_SEMC_HAS_SRAM_WDH_TIME)
|
|
timing |= SEMC_SRAMCR2_WDH((uint32_t)SEMC_ConvertTiming(config->tWriteHold_Ns, clkSrc_Hz) + 1UL);
|
|
#endif
|
|
timing |= SEMC_SRAMCR2_TA(SEMC_ConvertTiming(config->tTurnAround_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR2_AWDH(SEMC_ConvertTiming(config->tAddr2WriteHold_Ns, clkSrc_Hz));
|
|
#if defined(FSL_FEATURE_SEMC_HAS_SRAM_LC_TIME) && (FSL_FEATURE_SEMC_HAS_SRAM_LC_TIME)
|
|
timing |= SEMC_SRAMCR2_LC(config->latencyCount);
|
|
#endif
|
|
#if defined(FSL_FEATURE_SEMC_HAS_SRAM_RD_TIME) && (FSL_FEATURE_SEMC_HAS_SRAM_RD_TIME)
|
|
timing |= SEMC_SRAMCR2_RD((uint32_t)config->readCycle - 1UL);
|
|
#endif
|
|
timing |= SEMC_SRAMCR2_CEITV(SEMC_ConvertTiming(config->tCeInterval_Ns, clkSrc_Hz));
|
|
#if defined(FSL_FEATURE_SEMC_HAS_SRAM_RDH_TIME) && (FSL_FEATURE_SEMC_HAS_SRAM_RDH_TIME)
|
|
timing |= SEMC_SRAMCR2_RDH((uint32_t)SEMC_ConvertTiming(config->readHoldTime_Ns, clkSrc_Hz) + 0x01U);
|
|
#endif /* FSL_FEATURE_SEMC_HAS_SRAM_RDH_TIME */
|
|
|
|
/* SRAMCR2 timing setting. */
|
|
base->SRAMCR2 = timing;
|
|
}
|
|
#if defined(FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT) && (FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT > 0x01U)
|
|
else
|
|
{
|
|
timing = SEMC_SRAMCR5_CES(SEMC_ConvertTiming(config->tCeSetup_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR5_CEH(SEMC_ConvertTiming(config->tCeHold_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR5_AS(SEMC_ConvertTiming(config->tAddrSetup_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR5_AH(SEMC_ConvertTiming(config->tAddrHold_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR5_WEL(SEMC_ConvertTiming(config->tWeLow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR5_WEH(SEMC_ConvertTiming(config->tWeHigh_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR5_REL(SEMC_ConvertTiming(config->tReLow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR5_REH(SEMC_ConvertTiming(config->tReHigh_Ns, clkSrc_Hz));
|
|
|
|
/* SRAMCR5 timing setting. */
|
|
base->SRAMCR5 = timing;
|
|
|
|
timing = 0x00U;
|
|
#if defined(FSL_FEATURE_SEMC_HAS_SRAM_WDS_TIME) && (FSL_FEATURE_SEMC_HAS_SRAM_WDS_TIME)
|
|
timing = SEMC_SRAMCR6_WDS(SEMC_ConvertTiming(config->tWriteSetup_Ns, clkSrc_Hz));
|
|
#endif
|
|
#if defined(FSL_FEATURE_SEMC_HAS_SRAM_WDH_TIME) && (FSL_FEATURE_SEMC_HAS_SRAM_WDH_TIME)
|
|
timing |= SEMC_SRAMCR6_WDH((uint32_t)SEMC_ConvertTiming(config->tWriteHold_Ns, clkSrc_Hz) + 1UL);
|
|
#endif
|
|
timing |= SEMC_SRAMCR6_TA(SEMC_ConvertTiming(config->tTurnAround_Ns, clkSrc_Hz));
|
|
timing |= SEMC_SRAMCR6_AWDH(SEMC_ConvertTiming(config->tAddr2WriteHold_Ns, clkSrc_Hz));
|
|
#if defined(FSL_FEATURE_SEMC_HAS_SRAM_LC_TIME) && (FSL_FEATURE_SEMC_HAS_SRAM_LC_TIME)
|
|
timing |= SEMC_SRAMCR6_LC(config->latencyCount);
|
|
#endif
|
|
#if defined(FSL_FEATURE_SEMC_HAS_SRAM_RD_TIME) && (FSL_FEATURE_SEMC_HAS_SRAM_RD_TIME)
|
|
timing |= SEMC_SRAMCR6_RD((uint32_t)config->readCycle - 1UL);
|
|
#endif
|
|
timing |= SEMC_SRAMCR6_CEITV(SEMC_ConvertTiming(config->tCeInterval_Ns, clkSrc_Hz));
|
|
#if defined(FSL_FEATURE_SEMC_HAS_SRAM_RDH_TIME) && (FSL_FEATURE_SEMC_HAS_SRAM_RDH_TIME)
|
|
timing |= SEMC_SRAMCR6_RDH((uint32_t)SEMC_ConvertTiming(config->readHoldTime_Ns, clkSrc_Hz) + 0x01U);
|
|
#endif /* FSL_FEATURE_SEMC_HAS_SRAM_RDH_TIME */
|
|
|
|
/* SRAMCR6 timing setting. */
|
|
base->SRAMCR6 = timing;
|
|
}
|
|
#endif /* FSL_FEATURE_SEMC_SUPPORT_SRAM_COUNT */
|
|
|
|
return result;
|
|
}
|
|
|
|
/*!
|
|
* brief Configures DBI controller in SEMC.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param config The dbi configuration.
|
|
* param clkSrc_Hz The SEMC clock frequency.
|
|
*/
|
|
status_t SEMC_ConfigureDBI(SEMC_Type *base, semc_dbi_config_t *config, uint32_t clkSrc_Hz)
|
|
{
|
|
assert(config != NULL);
|
|
|
|
uint8_t memsize;
|
|
status_t result;
|
|
uint32_t timing;
|
|
|
|
if ((config->address < SEMC_STARTADDRESS) || (config->address > SEMC_ENDADDRESS))
|
|
{
|
|
return kStatus_SEMC_InvalidBaseAddress;
|
|
}
|
|
|
|
uint32_t iocReg = base->IOCR & (~(SEMC_IOCR_PINMUXBITWIDTH << (uint32_t)config->csxPinMux));
|
|
uint32_t muxCsx = (config->csxPinMux == kSEMC_MUXRDY) ?
|
|
(SEMC_IOCR_DBI_CSX - 1U) :
|
|
((config->csxPinMux == kSEMC_MUXA8) ? SEMC_IOCR_DBI_CSX_A8 : SEMC_IOCR_DBI_CSX);
|
|
|
|
/* IOMUX setting. */
|
|
base->IOCR = iocReg | (muxCsx << (uint32_t)config->csxPinMux);
|
|
/* Base control. */
|
|
result = SEMC_CovertMemorySize(base, config->memsize_kbytes, &memsize);
|
|
if (result != kStatus_Success)
|
|
{
|
|
return result;
|
|
}
|
|
base->BR[7] = (config->address & SEMC_BR_BA_MASK) | SEMC_BR_MS(memsize) | SEMC_BR_VLD_MASK;
|
|
|
|
/* DBICR0 timing setting. */
|
|
base->DBICR0 =
|
|
SEMC_DBICR0_PS(config->portSize) | SEMC_DBICR0_BL(config->burstLen) | SEMC_DBICR0_COL(config->columnAddrBitNum);
|
|
|
|
timing = SEMC_DBICR1_CES(SEMC_ConvertTiming(config->tCsxSetup_Ns, clkSrc_Hz));
|
|
timing |= SEMC_DBICR1_CEH(SEMC_ConvertTiming(config->tCsxHold_Ns, clkSrc_Hz));
|
|
timing |= SEMC_DBICR1_WEL(SEMC_ConvertTiming(config->tWexLow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_DBICR1_WEH(SEMC_ConvertTiming(config->tWexHigh_Ns, clkSrc_Hz));
|
|
timing |= SEMC_DBICR1_REL(SEMC_ConvertTiming(config->tRdxLow_Ns, clkSrc_Hz));
|
|
timing |= SEMC_DBICR1_REH(SEMC_ConvertTiming(config->tRdxHigh_Ns, clkSrc_Hz));
|
|
#if defined(SEMC_DBICR1_CEITV_MASK)
|
|
timing |= SEMC_DBICR1_CEITV(SEMC_ConvertTiming(config->tCsxInterval_Ns, clkSrc_Hz));
|
|
#endif /* SEMC_DBICR1_CEITV_MASK */
|
|
|
|
/* DBICR1 timing setting. */
|
|
base->DBICR1 = timing;
|
|
|
|
#if defined(SEMC_DBICR2_CEITV_MASK)
|
|
timing = SEMC_DBICR2_CEITV(SEMC_ConvertTiming(config->tCsxInterval_Ns, clkSrc_Hz));
|
|
|
|
/* DBICR2 timing setting. */
|
|
base->DBICR2 = timing;
|
|
#endif /* SEMC_DBICR2_CEITV_MASK */
|
|
|
|
return SEMC_ConfigureIPCommand(base, ((uint8_t)config->portSize + 1U));
|
|
}
|
|
|
|
/*!
|
|
* brief SEMC IP command access.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param type SEMC memory type. refer to "semc_mem_type_t"
|
|
* param address SEMC device address.
|
|
* param command SEMC IP command.
|
|
* For NAND device, we should use the SEMC_BuildNandIPCommand to get the right nand command.
|
|
* For NOR/DBI device, take refer to "semc_ipcmd_nor_dbi_t".
|
|
* For SRAM device, take refer to "semc_ipcmd_sram_t".
|
|
* For SDRAM device, take refer to "semc_ipcmd_sdram_t".
|
|
* param write Data for write access.
|
|
* param read Data pointer for read data out.
|
|
*/
|
|
status_t SEMC_SendIPCommand(
|
|
SEMC_Type *base, semc_mem_type_t type, uint32_t address, uint32_t command, uint32_t write, uint32_t *read)
|
|
{
|
|
uint32_t cmdMode;
|
|
bool readCmd = false;
|
|
bool writeCmd = false;
|
|
status_t result;
|
|
|
|
/* Clear status bit */
|
|
base->INTR |= SEMC_INTR_IPCMDDONE_MASK;
|
|
/* Set address. */
|
|
base->IPCR0 = address;
|
|
|
|
/* Check command mode. */
|
|
cmdMode = (uint32_t)command & 0x0FU;
|
|
switch (type)
|
|
{
|
|
case kSEMC_MemType_NAND:
|
|
readCmd = (cmdMode == (uint32_t)kSEMC_NANDCM_CommandAddressRead) ||
|
|
(cmdMode == (uint32_t)kSEMC_NANDCM_CommandRead) || (cmdMode == (uint32_t)kSEMC_NANDCM_Read);
|
|
writeCmd = (cmdMode == (uint32_t)kSEMC_NANDCM_CommandAddressWrite) ||
|
|
(cmdMode == (uint32_t)kSEMC_NANDCM_CommandWrite) || (cmdMode == (uint32_t)kSEMC_NANDCM_Write);
|
|
break;
|
|
case kSEMC_MemType_NOR:
|
|
case kSEMC_MemType_8080:
|
|
readCmd = (cmdMode == (uint32_t)kSEMC_NORDBICM_Read);
|
|
writeCmd = (cmdMode == (uint32_t)kSEMC_NORDBICM_Write);
|
|
break;
|
|
case kSEMC_MemType_SRAM:
|
|
readCmd = (cmdMode == (uint32_t)kSEMC_SRAMCM_ArrayRead) || (cmdMode == (uint32_t)kSEMC_SRAMCM_RegRead);
|
|
writeCmd = (cmdMode == (uint32_t)kSEMC_SRAMCM_ArrayWrite) || (cmdMode == (uint32_t)kSEMC_SRAMCM_RegWrite);
|
|
break;
|
|
case kSEMC_MemType_SDRAM:
|
|
readCmd = (cmdMode == (uint32_t)kSEMC_SDRAMCM_Read);
|
|
writeCmd = (cmdMode == (uint32_t)kSEMC_SDRAMCM_Write) || (cmdMode == (uint32_t)kSEMC_SDRAMCM_Modeset);
|
|
break;
|
|
default:
|
|
assert(false);
|
|
break;
|
|
}
|
|
|
|
if (writeCmd)
|
|
{
|
|
/* Set data. */
|
|
base->IPTXDAT = write;
|
|
}
|
|
|
|
/* Set command code. */
|
|
base->IPCMD = command | SEMC_IPCMD_KEY(SEMC_IPCOMMANDMAGICKEY);
|
|
/* Wait for command done. */
|
|
result = SEMC_IsIPCommandDone(base);
|
|
if (result != kStatus_Success)
|
|
{
|
|
return result;
|
|
}
|
|
|
|
if (readCmd)
|
|
{
|
|
/* Get the read data */
|
|
*read = base->IPRXDAT;
|
|
}
|
|
|
|
return kStatus_Success;
|
|
}
|
|
|
|
/*!
|
|
* brief SEMC NAND device memory write through IP command.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param address SEMC NAND device address.
|
|
* param data Data for write access.
|
|
* param size_bytes Data length.
|
|
*/
|
|
status_t SEMC_IPCommandNandWrite(SEMC_Type *base, uint32_t address, uint8_t *data, uint32_t size_bytes)
|
|
{
|
|
assert(data != NULL);
|
|
|
|
status_t result = kStatus_Success;
|
|
uint16_t ipCmd;
|
|
uint32_t tempData = 0;
|
|
|
|
/* Write command built */
|
|
ipCmd = SEMC_BuildNandIPCommand(0, kSEMC_NANDAM_ColumnRow, kSEMC_NANDCM_Write);
|
|
while (size_bytes >= SEMC_IPCOMMANDDATASIZEBYTEMAX)
|
|
{
|
|
/* Configure IP command data size. */
|
|
(void)SEMC_ConfigureIPCommand(base, SEMC_IPCOMMANDDATASIZEBYTEMAX);
|
|
result = SEMC_SendIPCommand(base, kSEMC_MemType_NAND, address, ipCmd, *(uint32_t *)(void *)data, NULL);
|
|
if (result != kStatus_Success)
|
|
{
|
|
break;
|
|
}
|
|
|
|
data += SEMC_IPCOMMANDDATASIZEBYTEMAX;
|
|
size_bytes -= SEMC_IPCOMMANDDATASIZEBYTEMAX;
|
|
}
|
|
|
|
if ((result == kStatus_Success) && (size_bytes != 0x00U))
|
|
{
|
|
(void)SEMC_ConfigureIPCommand(base, (uint8_t)size_bytes);
|
|
|
|
while (size_bytes != 0x00U)
|
|
{
|
|
size_bytes--;
|
|
tempData <<= SEMC_BYTE_NUMBIT;
|
|
tempData |= data[size_bytes];
|
|
}
|
|
|
|
result = SEMC_SendIPCommand(base, kSEMC_MemType_NAND, address, ipCmd, tempData, NULL);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
/*!
|
|
* brief SEMC NAND device memory read through IP command.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param address SEMC NAND device address.
|
|
* param data Data pointer for data read out.
|
|
* param size_bytes Data length.
|
|
*/
|
|
status_t SEMC_IPCommandNandRead(SEMC_Type *base, uint32_t address, uint8_t *data, uint32_t size_bytes)
|
|
{
|
|
assert(data != NULL);
|
|
|
|
status_t result = kStatus_Success;
|
|
uint16_t ipCmd;
|
|
uint32_t tempData = 0;
|
|
|
|
/* Configure IP command data size. */
|
|
(void)SEMC_ConfigureIPCommand(base, SEMC_IPCOMMANDDATASIZEBYTEMAX);
|
|
/* Read command built */
|
|
ipCmd = SEMC_BuildNandIPCommand(0, kSEMC_NANDAM_ColumnRow, kSEMC_NANDCM_Read);
|
|
|
|
while (size_bytes >= SEMC_IPCOMMANDDATASIZEBYTEMAX)
|
|
{
|
|
result = SEMC_SendIPCommand(base, kSEMC_MemType_NAND, address, ipCmd, 0, (uint32_t *)(void *)data);
|
|
if (result != kStatus_Success)
|
|
{
|
|
break;
|
|
}
|
|
|
|
data += SEMC_IPCOMMANDDATASIZEBYTEMAX;
|
|
size_bytes -= SEMC_IPCOMMANDDATASIZEBYTEMAX;
|
|
}
|
|
|
|
if ((result == kStatus_Success) && (size_bytes != 0x00U))
|
|
{
|
|
(void)SEMC_ConfigureIPCommand(base, (uint8_t)size_bytes);
|
|
result = SEMC_SendIPCommand(base, kSEMC_MemType_NAND, address, ipCmd, 0, &tempData);
|
|
|
|
while (size_bytes != 0x00U)
|
|
{
|
|
size_bytes--;
|
|
*(data + size_bytes) = (uint8_t)((tempData >> (SEMC_BYTE_NUMBIT * size_bytes)) & 0xFFU);
|
|
}
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
/*!
|
|
* brief SEMC NOR device memory read through IP command.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param address SEMC NOR device address.
|
|
* param data Data pointer for data read out.
|
|
* param size_bytes Data length.
|
|
*/
|
|
status_t SEMC_IPCommandNorRead(SEMC_Type *base, uint32_t address, uint8_t *data, uint32_t size_bytes)
|
|
{
|
|
assert(data != NULL);
|
|
|
|
uint32_t tempData = 0;
|
|
status_t result = kStatus_Success;
|
|
uint8_t dataSize = (uint8_t)base->NORCR0 & SEMC_NORCR0_PS_MASK;
|
|
|
|
/* Configure IP command data size. */
|
|
(void)SEMC_ConfigureIPCommand(base, SEMC_IPCOMMANDDATASIZEBYTEMAX);
|
|
|
|
while (size_bytes >= SEMC_IPCOMMANDDATASIZEBYTEMAX)
|
|
{
|
|
result = SEMC_SendIPCommand(base, kSEMC_MemType_NOR, address, (uint32_t)kSEMC_NORDBICM_Read, 0,
|
|
(uint32_t *)(void *)data);
|
|
if (result != kStatus_Success)
|
|
{
|
|
break;
|
|
}
|
|
|
|
data += SEMC_IPCOMMANDDATASIZEBYTEMAX;
|
|
size_bytes -= SEMC_IPCOMMANDDATASIZEBYTEMAX;
|
|
}
|
|
|
|
if ((result == kStatus_Success) && (size_bytes != 0x00U))
|
|
{
|
|
(void)SEMC_ConfigureIPCommand(base, (uint8_t)size_bytes);
|
|
result = SEMC_SendIPCommand(base, kSEMC_MemType_NOR, address, (uint16_t)kSEMC_NORDBICM_Read, 0, &tempData);
|
|
while (size_bytes != 0x00U)
|
|
{
|
|
size_bytes--;
|
|
*(data + size_bytes) = (uint8_t)((tempData >> (SEMC_BYTE_NUMBIT * size_bytes)) & 0xFFU);
|
|
}
|
|
}
|
|
|
|
(void)SEMC_ConfigureIPCommand(base, dataSize);
|
|
return result;
|
|
}
|
|
|
|
/*!
|
|
* brief SEMC NOR device memory write through IP command.
|
|
*
|
|
* param base SEMC peripheral base address.
|
|
* param address SEMC NOR device address.
|
|
* param data Data for write access.
|
|
* param size_bytes Data length.
|
|
*/
|
|
status_t SEMC_IPCommandNorWrite(SEMC_Type *base, uint32_t address, uint8_t *data, uint32_t size_bytes)
|
|
{
|
|
assert(data != NULL);
|
|
|
|
uint32_t tempData = 0;
|
|
status_t result = kStatus_Success;
|
|
uint8_t dataSize = (uint8_t)base->NORCR0 & SEMC_NORCR0_PS_MASK;
|
|
|
|
/* Write command built */
|
|
while (size_bytes >= SEMC_IPCOMMANDDATASIZEBYTEMAX)
|
|
{
|
|
/* Configure IP command data size. */
|
|
(void)SEMC_ConfigureIPCommand(base, SEMC_IPCOMMANDDATASIZEBYTEMAX);
|
|
result = SEMC_SendIPCommand(base, kSEMC_MemType_NOR, address, (uint16_t)kSEMC_NORDBICM_Write,
|
|
*(uint32_t *)(void *)data, NULL);
|
|
if (result != kStatus_Success)
|
|
{
|
|
break;
|
|
}
|
|
size_bytes -= SEMC_IPCOMMANDDATASIZEBYTEMAX;
|
|
data += SEMC_IPCOMMANDDATASIZEBYTEMAX;
|
|
}
|
|
|
|
if ((result == kStatus_Success) && (size_bytes != 0x00U))
|
|
{
|
|
(void)SEMC_ConfigureIPCommand(base, (uint8_t)size_bytes);
|
|
|
|
while (size_bytes != 0x00U)
|
|
{
|
|
tempData |= ((uint32_t) * (data + size_bytes - 1U) << ((size_bytes - 1U) * SEMC_BYTE_NUMBIT));
|
|
size_bytes--;
|
|
}
|
|
|
|
result = SEMC_SendIPCommand(base, kSEMC_MemType_NOR, address, (uint16_t)kSEMC_NORDBICM_Write, tempData, NULL);
|
|
}
|
|
(void)SEMC_ConfigureIPCommand(base, dataSize);
|
|
|
|
return result;
|
|
}
|