908 lines
52 KiB
C
908 lines
52 KiB
C
/*
|
|
* Copyright (c) 2006-2018, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2009-01-05 Bernard first implementation
|
|
*/
|
|
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
#include "board.h"
|
|
#include "pin_mux.h"
|
|
#include "fsl_iomuxc.h"
|
|
#include "fsl_gpio.h"
|
|
|
|
#ifdef BSP_USING_DMA
|
|
#include "fsl_dmamux.h"
|
|
#include "fsl_edma.h"
|
|
#endif
|
|
|
|
#define NVIC_PRIORITYGROUP_0 0x00000007U /*!< 0 bits for pre-emption priority
|
|
4 bits for subpriority */
|
|
#define NVIC_PRIORITYGROUP_1 0x00000006U /*!< 1 bits for pre-emption priority
|
|
3 bits for subpriority */
|
|
#define NVIC_PRIORITYGROUP_2 0x00000005U /*!< 2 bits for pre-emption priority
|
|
2 bits for subpriority */
|
|
#define NVIC_PRIORITYGROUP_3 0x00000004U /*!< 3 bits for pre-emption priority
|
|
1 bits for subpriority */
|
|
#define NVIC_PRIORITYGROUP_4 0x00000003U /*!< 4 bits for pre-emption priority
|
|
0 bits for subpriority */
|
|
|
|
/* MPU configuration. */
|
|
static void BOARD_ConfigMPU(void)
|
|
{
|
|
/* Disable I cache and D cache */
|
|
SCB_DisableICache();
|
|
SCB_DisableDCache();
|
|
|
|
/* Disable MPU */
|
|
ARM_MPU_Disable();
|
|
|
|
/* Region 0 setting */
|
|
MPU->RBAR = ARM_MPU_RBAR(0, 0xC0000000U);
|
|
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_512MB);
|
|
|
|
/* Region 1 setting */
|
|
MPU->RBAR = ARM_MPU_RBAR(1, 0x80000000U);
|
|
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1GB);
|
|
|
|
/* Region 2 setting */
|
|
// spi flash: normal type, cacheable, no bufferable, no shareable
|
|
MPU->RBAR = ARM_MPU_RBAR(2, 0x60000000U);
|
|
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 0, 0, ARM_MPU_REGION_SIZE_512MB);
|
|
|
|
/* Region 3 setting */
|
|
MPU->RBAR = ARM_MPU_RBAR(3, 0x00000000U);
|
|
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 2, 0, 0, 0, 0, ARM_MPU_REGION_SIZE_1GB);
|
|
|
|
/* Region 4 setting */
|
|
MPU->RBAR = ARM_MPU_RBAR(4, 0x00000000U);
|
|
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_128KB);
|
|
|
|
/* Region 5 setting */
|
|
MPU->RBAR = ARM_MPU_RBAR(5, 0x20000000U);
|
|
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_128KB);
|
|
|
|
/* Region 6 setting */
|
|
MPU->RBAR = ARM_MPU_RBAR(6, 0x20200000U);
|
|
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_256KB);
|
|
|
|
#if defined(BSP_USING_SDRAM)
|
|
/* Region 7 setting */
|
|
MPU->RBAR = ARM_MPU_RBAR(7, 0x80000000U);
|
|
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 0, 0, 1, 1, 0, ARM_MPU_REGION_SIZE_32MB);
|
|
|
|
/* Region 8 setting */
|
|
MPU->RBAR = ARM_MPU_RBAR(8, 0x81E00000U);
|
|
MPU->RASR = ARM_MPU_RASR(0, ARM_MPU_AP_FULL, 1, 1, 0, 0, 0, ARM_MPU_REGION_SIZE_2MB);
|
|
#endif
|
|
|
|
/* Enable MPU */
|
|
ARM_MPU_Enable(MPU_CTRL_PRIVDEFENA_Msk);
|
|
|
|
/* Enable I cache and D cache */
|
|
SCB_EnableDCache();
|
|
SCB_EnableICache();
|
|
}
|
|
|
|
|
|
/* This is the timer interrupt service routine. */
|
|
void SysTick_Handler(void)
|
|
{
|
|
/* enter interrupt */
|
|
rt_interrupt_enter();
|
|
|
|
rt_tick_increase();
|
|
|
|
/* leave interrupt */
|
|
rt_interrupt_leave();
|
|
}
|
|
|
|
#ifdef BSP_USING_DMA
|
|
void imxrt_dma_init(void)
|
|
{
|
|
edma_config_t config;
|
|
|
|
DMAMUX_Init(DMAMUX);
|
|
EDMA_GetDefaultConfig(&config);
|
|
EDMA_Init(DMA0, &config);
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_LPUART
|
|
void imxrt_uart_pins_init(void)
|
|
{
|
|
#ifdef BSP_USING_LPUART1
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_12_LPUART1_TX, /* GPIO_AD_B0_12 is configured as LPUART1_TX */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_13_LPUART1_RX, /* GPIO_AD_B0_13 is configured as LPUART1_RX */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_12_LPUART1_TX, /* GPIO_AD_B0_12 PAD functional properties : */
|
|
0x10B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Down
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_13_LPUART1_RX, /* GPIO_AD_B0_13 PAD functional properties : */
|
|
0x10B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Down
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
#endif
|
|
#ifdef BSP_USING_LPUART2
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B1_02_LPUART2_TX,
|
|
0U);
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B1_03_LPUART2_RX,
|
|
0U);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B1_02_LPUART2_TX,
|
|
0x10B0u);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B1_03_LPUART2_RX,
|
|
0x10B0u);
|
|
|
|
#endif
|
|
#ifdef BSP_USING_LPUART3
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B1_06_LPUART3_TX,
|
|
0U);
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B1_07_LPUART3_RX,
|
|
0U);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B1_06_LPUART3_TX,
|
|
0x10B0u);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B1_07_LPUART3_RX,
|
|
0x10B0u);
|
|
#endif
|
|
#ifdef BSP_USING_LPUART4
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_00_LPUART4_TX,
|
|
0U);
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_01_LPUART4_RX,
|
|
0U);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_00_LPUART4_TX,
|
|
0x10B0u);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_01_LPUART4_RX,
|
|
0x10B0u);
|
|
#endif
|
|
#ifdef BSP_USING_LPUART5
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_12_LPUART5_TX,
|
|
0U);
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_13_LPUART5_RX,
|
|
0U);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_12_LPUART5_TX,
|
|
0x10B0u);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_13_LPUART5_RX,
|
|
0x10B0u);
|
|
#endif
|
|
#ifdef BSP_USING_LPUART6
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_02_LPUART6_TX,
|
|
0U);
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_03_LPUART6_RX,
|
|
0U);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_02_LPUART6_TX,
|
|
0x10B0u);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_03_LPUART6_RX,
|
|
0x10B0u);
|
|
#endif
|
|
#ifdef BSP_USING_LPUART7
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_31_LPUART7_TX,
|
|
0U);
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_32_LPUART7_RX,
|
|
0U);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_EMC_31_LPUART7_TX,
|
|
0x10B0u);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_EMC_32_LPUART7_RX,
|
|
0x10B0u);
|
|
#endif
|
|
#ifdef BSP_USING_LPUART8
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B1_10_LPUART8_TX,
|
|
0U);
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B1_11_LPUART8_RX,
|
|
0U);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B1_10_LPUART8_TX,
|
|
0x10B0u);
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B1_11_LPUART8_RX,
|
|
0x10B0u);
|
|
#endif
|
|
}
|
|
#endif /* BSP_USING_LPUART */
|
|
|
|
#ifdef BSP_USING_I2C
|
|
static void imxrt_i2c_pins_init(void)
|
|
{
|
|
#ifdef BSP_USING_I2C1
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, /* GPIO_AD_B1_00 is configured as LPI2C1_SCL */
|
|
1U); /* Software Input On Field: Force input path of pad GPIO_AD_B1_00 */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, /* GPIO_AD_B1_01 is configured as LPI2C1_SDA */
|
|
1U); /* Software Input On Field: Force input path of pad GPIO_AD_B1_01 */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, /* GPIO_AD_B1_00 PAD functional properties : */
|
|
0xD8B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Enabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 22K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, /* GPIO_AD_B1_01 PAD functional properties : */
|
|
0xD8B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Enabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 22K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
#endif
|
|
|
|
#ifdef BSP_USING_I2C3
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL, /* GPIO_AD_B1_00 is configured as LPI2C1_SCL */
|
|
1U); /* Software Input On Field: Force input path of pad GPIO_AD_B1_00 */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA, /* GPIO_AD_B1_01 is configured as LPI2C1_SDA */
|
|
1U); /* Software Input On Field: Force input path of pad GPIO_AD_B1_01 */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL, /* GPIO_AD_B1_00 PAD functional properties : */
|
|
0xD8B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Enabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 22K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA, /* GPIO_AD_B1_01 PAD functional properties : */
|
|
0xD8B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Enabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 22K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
#endif
|
|
|
|
#ifdef BSP_USING_I2C4
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_12_LPI2C4_SCL, /* GPIO_AD_B1_00 is configured as LPI2C1_SCL */
|
|
1U); /* Software Input On Field: Force input path of pad GPIO_AD_B1_00 */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_13_LPI2C4_SDA, /* GPIO_AD_B1_01 is configured as LPI2C1_SDA */
|
|
1U); /* Software Input On Field: Force input path of pad GPIO_AD_B1_01 */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_12_LPI2C4_SCL, /* GPIO_AD_B1_00 PAD functional properties : */
|
|
0xD8B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Enabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 22K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_13_LPI2C4_SDA, /* GPIO_AD_B1_01 PAD functional properties : */
|
|
0xD8B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Enabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 22K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
#endif
|
|
}
|
|
#endif /* BSP_USING_I2C */
|
|
|
|
#ifdef BSP_USING_LCD
|
|
static void imxrt_lcd_pins_init(void)
|
|
{
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, /* GPIO_AD_B0_02 is configured as GPIO1_IO02 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 is configured as GPIO2_IO31 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_00_LCD_CLK, /* GPIO_B0_00 is configured as LCD_CLK */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_01_LCD_ENABLE, /* GPIO_B0_01 is configured as LCD_ENABLE */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_02_LCD_HSYNC, /* GPIO_B0_02 is configured as LCD_HSYNC */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_03_LCD_VSYNC, /* GPIO_B0_03 is configured as LCD_VSYNC */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_04_LCD_DATA00, /* GPIO_B0_04 is configured as LCD_DATA00 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_05_LCD_DATA01, /* GPIO_B0_05 is configured as LCD_DATA01 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_06_LCD_DATA02, /* GPIO_B0_06 is configured as LCD_DATA02 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_07_LCD_DATA03, /* GPIO_B0_07 is configured as LCD_DATA03 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_08_LCD_DATA04, /* GPIO_B0_08 is configured as LCD_DATA04 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_09_LCD_DATA05, /* GPIO_B0_09 is configured as LCD_DATA05 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_10_LCD_DATA06, /* GPIO_B0_10 is configured as LCD_DATA06 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_11_LCD_DATA07, /* GPIO_B0_11 is configured as LCD_DATA07 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_12_LCD_DATA08, /* GPIO_B0_12 is configured as LCD_DATA08 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_13_LCD_DATA09, /* GPIO_B0_13 is configured as LCD_DATA09 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_14_LCD_DATA10, /* GPIO_B0_14 is configured as LCD_DATA10 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B0_15_LCD_DATA11, /* GPIO_B0_15 is configured as LCD_DATA11 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_00_LCD_DATA12, /* GPIO_B1_00 is configured as LCD_DATA12 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_01_LCD_DATA13, /* GPIO_B1_01 is configured as LCD_DATA13 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_02_LCD_DATA14, /* GPIO_B1_02 is configured as LCD_DATA14 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_03_LCD_DATA15, /* GPIO_B1_03 is configured as LCD_DATA15 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */x
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, /* GPIO_AD_B0_02 PAD functional properties : */
|
|
0x10B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Down
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_15_GPIO2_IO31, /* GPIO_B1_15 PAD functional properties : */
|
|
0x10B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Down
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_12_LPUART1_TX, /* GPIO_AD_B0_12 PAD functional properties : */
|
|
0x10B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Down
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_13_LPUART1_RX, /* GPIO_AD_B0_13 PAD functional properties : */
|
|
0x10B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Down
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_00_LCD_CLK, /* GPIO_B0_00 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_01_LCD_ENABLE, /* GPIO_B0_01 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_02_LCD_HSYNC, /* GPIO_B0_02 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_03_LCD_VSYNC, /* GPIO_B0_03 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_04_LCD_DATA00, /* GPIO_B0_04 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_05_LCD_DATA01, /* GPIO_B0_05 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_06_LCD_DATA02, /* GPIO_B0_06 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_07_LCD_DATA03, /* GPIO_B0_07 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_08_LCD_DATA04, /* GPIO_B0_08 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_09_LCD_DATA05, /* GPIO_B0_09 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_10_LCD_DATA06, /* GPIO_B0_10 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_11_LCD_DATA07, /* GPIO_B0_11 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_12_LCD_DATA08, /* GPIO_B0_12 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_13_LCD_DATA09, /* GPIO_B0_13 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_14_LCD_DATA10, /* GPIO_B0_14 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B0_15_LCD_DATA11, /* GPIO_B0_15 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_00_LCD_DATA12, /* GPIO_B1_00 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_01_LCD_DATA13, /* GPIO_B1_01 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_02_LCD_DATA14, /* GPIO_B1_02 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_03_LCD_DATA15, /* GPIO_B1_03 PAD functional properties : */
|
|
0x01B0B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Enabled */
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef BSP_USING_ETH
|
|
void imxrt_enet_pins_init(void)
|
|
{
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
|
|
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, /* GPIO_AD_B0_09 is configured as GPIO1_IO09 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_10_GPIO1_IO10, /* GPIO_AD_B0_10 is configured as GPIO1_IO10 */
|
|
0U);
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_04_ENET_RX_DATA00, /* GPIO_B1_04 is configured as ENET_RX_DATA00 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_05_ENET_RX_DATA01, /* GPIO_B1_05 is configured as ENET_RX_DATA01 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_06_ENET_RX_EN, /* GPIO_B1_06 is configured as ENET_RX_EN */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_07_ENET_TX_DATA00, /* GPIO_B1_07 is configured as ENET_TX_DATA00 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_08_ENET_TX_DATA01, /* GPIO_B1_08 is configured as ENET_TX_DATA01 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_09_ENET_TX_EN, /* GPIO_B1_09 is configured as ENET_TX_EN */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_10_ENET_REF_CLK, /* GPIO_B1_10 is configured as ENET_REF_CLK */
|
|
1U); /* Software Input On Field: Force input path of pad GPIO_B1_10 */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_B1_11_ENET_RX_ER, /* GPIO_B1_11 is configured as ENET_RX_ER */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_40_ENET_MDC, /* GPIO_EMC_40 is configured as ENET_MDC */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_EMC_41_ENET_MDIO, /* GPIO_EMC_41 is configured as ENET_MDIO */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, /* GPIO_AD_B0_09 PAD functional properties : */
|
|
0xB0A9u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/5
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_10_GPIO1_IO10, /* GPIO_AD_B0_10 PAD functional properties : */
|
|
0xB0A9u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/5
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_04_ENET_RX_DATA00, /* GPIO_B1_04 PAD functional properties : */
|
|
0xB0E9u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/5
|
|
Speed Field: max(200MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_05_ENET_RX_DATA01, /* GPIO_B1_05 PAD functional properties : */
|
|
0xB0E9u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/5
|
|
Speed Field: max(200MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_06_ENET_RX_EN, /* GPIO_B1_06 PAD functional properties : */
|
|
0xB0E9u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/5
|
|
Speed Field: max(200MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_07_ENET_TX_DATA00, /* GPIO_B1_07 PAD functional properties : */
|
|
0xB0E9u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/5
|
|
Speed Field: max(200MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_08_ENET_TX_DATA01, /* GPIO_B1_08 PAD functional properties : */
|
|
0xB0E9u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/5
|
|
Speed Field: max(200MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_09_ENET_TX_EN, /* GPIO_B1_09 PAD functional properties : */
|
|
0xB0E9u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/5
|
|
Speed Field: max(200MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_10_ENET_REF_CLK, /* GPIO_B1_10 PAD functional properties : */
|
|
0x31u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: low(50MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Disabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Down
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_B1_11_ENET_RX_ER, /* GPIO_B1_11 PAD functional properties : */
|
|
0xB0E9u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/5
|
|
Speed Field: max(200MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_EMC_40_ENET_MDC, /* GPIO_EMC_40 PAD functional properties : */
|
|
0xB0E9u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/5
|
|
Speed Field: max(200MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_EMC_41_ENET_MDIO, /* GPIO_EMC_41 PAD functional properties : */
|
|
0xB829u); /* Slew Rate Field: Fast Slew Rate
|
|
Drive Strength Field: R0/5
|
|
Speed Field: low(50MHz)
|
|
Open Drain Enable Field: Open Drain Enabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Pull
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Up
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
}
|
|
|
|
#ifndef BSP_USING_PHY
|
|
void imxrt_enet_phy_reset_by_gpio(void)
|
|
{
|
|
gpio_pin_config_t gpio_config = {kGPIO_DigitalOutput, 0, kGPIO_NoIntmode};
|
|
|
|
GPIO_PinInit(GPIO1, 9, &gpio_config);
|
|
GPIO_PinInit(GPIO1, 10, &gpio_config);
|
|
/* pull up the ENET_INT before RESET. */
|
|
GPIO_WritePinOutput(GPIO1, 10, 1);
|
|
GPIO_WritePinOutput(GPIO1, 9, 0);
|
|
rt_thread_delay(100);
|
|
GPIO_WritePinOutput(GPIO1, 9, 1);
|
|
}
|
|
#endif /* BSP_USING_PHY */
|
|
|
|
#endif /* BSP_USING_ETH */
|
|
|
|
#ifdef BSP_USING_PHY
|
|
void imxrt_phy_pins_init( void )
|
|
{
|
|
IOMUXC_SetPinMux(
|
|
IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, /* GPIO_AD_B0_09 is configured as GPIO1_IO09 */
|
|
0U); /* Software Input On Field: Input Path is determined by functionality */
|
|
IOMUXC_SetPinConfig(
|
|
IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, /* GPIO_B0_00 PAD functional properties : */
|
|
0x10B0u); /* Slew Rate Field: Slow Slew Rate
|
|
Drive Strength Field: R0/6
|
|
Speed Field: medium(100MHz)
|
|
Open Drain Enable Field: Open Drain Disabled
|
|
Pull / Keep Enable Field: Pull/Keeper Enabled
|
|
Pull / Keep Select Field: Keeper
|
|
Pull Up / Down Config. Field: 100K Ohm Pull Down
|
|
Hyst. Enable Field: Hysteresis Disabled */
|
|
}
|
|
#endif /* BSP_USING_PHY */
|
|
|
|
/**
|
|
* This function will initial rt1050 board.
|
|
*/
|
|
void rt_hw_board_init()
|
|
{
|
|
BOARD_ConfigMPU();
|
|
BOARD_InitPins();
|
|
BOARD_BootClockRUN();
|
|
|
|
NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
|
|
SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND);
|
|
|
|
#ifdef BSP_USING_LPUART
|
|
imxrt_uart_pins_init();
|
|
#endif
|
|
|
|
#ifdef BSP_USING_I2C
|
|
imxrt_i2c_pins_init();
|
|
#endif
|
|
|
|
#ifdef BSP_USING_ETH
|
|
imxrt_enet_pins_init();
|
|
#endif
|
|
|
|
#ifdef BSP_USING_PHY
|
|
imxrt_phy_pins_init();
|
|
#endif
|
|
|
|
#ifdef BSP_USING_LCD
|
|
imxrt_lcd_pins_init();
|
|
#endif
|
|
|
|
#ifdef BSP_USING_DMA
|
|
imxrt_dma_init();
|
|
#endif
|
|
|
|
#ifdef RT_USING_HEAP
|
|
rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
|
|
#endif
|
|
|
|
#ifdef RT_USING_COMPONENTS_INIT
|
|
rt_components_board_init();
|
|
#endif
|
|
|
|
#ifdef RT_USING_CONSOLE
|
|
rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
|
|
#endif
|
|
}
|