liruncong af1044955a 修正am335x中mmu问题
1) mmu_disable_dcache/mmu_enable_dcache等, 应使用rt_cpu_xxx相关函数,否则会跑飞. armcc并没有提供rt_cpu_xxx对应汇编代码,先删除
2) mmu_setmtt抽取为函数mmu_setmtts,并增加RT_WEAK.mmu_setmtts此处作为示例函数.实际用户板子可在bsp中重新实现该函数.可在rt_components_board_init函数前调用rt_hw_mmu_init
2018-09-15 11:37:14 +08:00

52 lines
1.8 KiB
C

/*
* File : mmu.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
#ifndef __MMU_H__
#define __MMU_H__
#include <rtthread.h>
#define DESC_SEC (0x2)
#define CB (3<<2) //cache_on, write_back
#define CNB (2<<2) //cache_on, write_through
#define NCB (1<<2) //cache_off,WR_BUF on
#define NCNB (0<<2) //cache_off,WR_BUF off
#define AP_RW (3<<10) //supervisor=RW, user=RW
#define AP_RO (2<<10) //supervisor=RW, user=RO
#define DOMAIN_FAULT (0x0)
#define DOMAIN_CHK (0x1)
#define DOMAIN_NOTCHK (0x3)
#define DOMAIN0 (0x0<<5)
#define DOMAIN1 (0x1<<5)
#define DOMAIN0_ATTR (DOMAIN_CHK<<0)
#define DOMAIN1_ATTR (DOMAIN_FAULT<<2)
#define RW_CB (AP_RW|DOMAIN0|CB|DESC_SEC) /* Read/Write, cache, write back */
#define RW_CNB (AP_RW|DOMAIN0|CNB|DESC_SEC) /* Read/Write, cache, write through */
#define RW_NCNB (AP_RW|DOMAIN0|NCNB|DESC_SEC) /* Read/Write without cache and write buffer */
#define RW_FAULT (AP_RW|DOMAIN1|NCNB|DESC_SEC) /* Read/Write without cache and write buffer */
void rt_hw_mmu_init(void);
#endif