libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/lpc54114-lite/drivers/audio/fsl_wm8904.c

544 lines
16 KiB
C
Executable File
Raw Blame History

/*
* The Clear BSD License
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted (subject to the limitations in the disclaimer below) provided
* that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Change Logs:
* Date Author Notes
* 2019-11-09 LiWeiHao Porting to RT-Thread
*/
#include "fsl_common.h"
#include "fsl_debug_console.h"
#include "fsl_wm8904.h"
#include "fsl_i2c.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#define WM8904_RESET (0x00)
#define WM8904_ANALOG_ADC_0 (0x0A)
#define WM8904_POWER_MGMT_0 (0x0C)
#define WM8904_POWER_MGMT_2 (0x0E)
#define WM8904_POWER_MGMT_6 (0x12)
#define WM8904_CLK_RATES_0 (0x14)
#define WM8904_CLK_RATES_1 (0x15)
#define WM8904_CLK_RATES_2 (0x16)
#define WM8904_AUDIO_IF_0 (0x18)
#define WM8904_AUDIO_IF_1 (0x19)
#define WM8904_AUDIO_IF_2 (0x1A)
#define WM8904_AUDIO_IF_3 (0x1B)
#define WM8904_DAC_DIG_1 (0x21)
#define WM8904_ANALOG_LEFT_IN_0 (0x2C)
#define WM8904_ANALOG_RIGHT_IN_0 (0x2D)
#define WM8904_ANALOG_LEFT_IN_1 (0x2E)
#define WM8904_ANALOG_RIGHT_IN_1 (0x2F)
#define WM8904_ANALOG_OUT1_LEFT (0x39)
#define WM8904_ANALOG_OUT1_RIGHT (0x3A)
#define WM8904_ANALOG_OUT12_ZC (0x3D)
#define WM8904_DC_SERVO_0 (0x43)
#define WM8904_ANALOG_HP_0 (0x5A)
#define WM8904_CHRG_PUMP_0 (0x62)
#define WM8904_CLS_W_0 (0x68)
#define WM8904_WRT_SEQUENCER_0 (0x6C)
#define WM8904_WRT_SEQUENCER_3 (0x6F)
#define WM8904_WRT_SEQUENCER_4 (0x70)
/*******************************************************************************
* Prototypes
******************************************************************************/
static status_t WM8904_WaitOnWriteSequencer(wm8904_handle_t *handle);
static status_t WM8904_WriteRegister(wm8904_handle_t *handle, uint8_t reg, uint16_t value);
static status_t WM8904_ReadRegister(wm8904_handle_t *handle, uint8_t reg, uint16_t *value);
static status_t WM8904_ModifyRegister(wm8904_handle_t *handle, uint8_t reg, uint16_t mask, uint16_t value);
/*******************************************************************************
* Variables
******************************************************************************/
static const uint8_t allRegisters[] =
{
0x00, 0x04, 0x05, 0x06, 0x07, 0x0A, 0x0C, 0x0E, 0x0F, 0x12, 0x14, 0x15, 0x16, 0x18, 0x19, 0x1A, 0x1B,
0x1E, 0x1F, 0x20, 0x21, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x39,
0x3A, 0x3B, 0x3C, 0x3D, 0x43, 0x44, 0x45, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x5A, 0x5E, 0x62,
0x68, 0x6C, 0x6D, 0x6E, 0x6F, 0x70, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x7B, 0x7C, 0x7E, 0x7F,
0x80, 0x81, 0x82, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93,
0x94, 0x95, 0x96, 0x97, 0x98, 0x99, 0x9A, 0x9B, 0x9C, 0x9D, 0xC6, 0xF7, 0xF8
};
/*******************************************************************************
* Code
******************************************************************************/
status_t WM8904_Init(wm8904_handle_t *handle, wm8904_config_t *config)
{
status_t result;
/* reset */
result = WM8904_WriteRegister(handle, WM8904_RESET, 0x0000);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* MCLK_INV=0, SYSCLK_SRC=0, TOCLK_RATE=0, OPCLK_ENA=1,
* CLK_SYS_ENA=1, CLK_DSP_ENA=1, TOCLK_ENA=1 */
result = WM8904_WriteRegister(handle, WM8904_CLK_RATES_2, 0x000F);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* WSEQ_ENA=1, WSEQ_WRITE_INDEX=0_0000 */
result = WM8904_WriteRegister(handle, WM8904_WRT_SEQUENCER_0, 0x0100);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* WSEQ_ABORT=0, WSEQ_START=1, WSEQ_START_INDEX=00_0000 */
result = WM8904_WriteRegister(handle, WM8904_WRT_SEQUENCER_3, 0x0100);
if (result != kStatus_WM8904_Success)
{
return result;
}
result = WM8904_WaitOnWriteSequencer(handle);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* TOCLK_RATE_DIV16=0, TOCLK_RATE_x4=1, SR_MODE=0, MCLK_DIV=1
* (Required for MMCs: SGY, KRT see erratum CE000546) */
result = WM8904_WriteRegister(handle, WM8904_CLK_RATES_0, 0xA45F);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* INL_ENA=1, INR ENA=1 */
result = WM8904_WriteRegister(handle, WM8904_POWER_MGMT_0, 0x0003);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* HPL_PGA_ENA=1, HPR_PGA_ENA=1 */
result = WM8904_WriteRegister(handle, WM8904_POWER_MGMT_2, 0x0003);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* DACL_ENA=1, DACR_ENA=1, ADCL_ENA=1, ADCR_ENA=1 */
result = WM8904_WriteRegister(handle, WM8904_POWER_MGMT_6, 0x000F);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* ADC_OSR128=1 */
result = WM8904_WriteRegister(handle, WM8904_ANALOG_ADC_0, 0x0001);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* CLK_SYS_RAT=0101 (512/fs) SAMPLE_RATE=101 (44.1kHz /48kHz) */
result = WM8904_WriteRegister(handle, WM8904_CLK_RATES_1, 0x1405);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* DACL_DATINV=0, DACR_DATINV=0, DAC_BOOST=00, LOOPBACK=0, AIFADCL_SRC=0,
* AIFADCR_SRC=1, AIFDACL_SRC=0, AIFDACR_SRC=1, ADC_COMP=0, ADC_COMPMODE=0,
* DAC_COMP=0, DAC_COMPMODE=0 */
result = WM8904_WriteRegister(handle, WM8904_AUDIO_IF_0, 0x0050);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* BCLK_DIR=0 (input), AIF_WL=00 (16-bits) */
result = WM8904_WriteRegister(handle, WM8904_AUDIO_IF_1, 0x0002);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* OPCLK_DIV=0 (sysclk), BCLK_DIV=0c (sysclk/16) */
result = WM8904_WriteRegister(handle, WM8904_AUDIO_IF_2, 0x000c);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* LRCLK_DIR=0 (input), LRCLK_RATE=0010_0000_0000 (BCLK / 32) */
result = WM8904_WriteRegister(handle, WM8904_AUDIO_IF_3, 0x0020);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* DAC_MONO=0, DAC_SB_FILT-0, DAC_MUTERATE=0, DAC_UNMUTE RAMP=0,
* DAC_OSR128=1, DAC_MUTE=0, DEEMPH=0 (none) */
result = WM8904_WriteRegister(handle, WM8904_DAC_DIG_1, 0x0040);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* INL_CM_ENA=0, L_IP_SEL_N=10, L_IP_SEL_P=01, L_MODE=00 */
result = WM8904_WriteRegister(handle, WM8904_ANALOG_LEFT_IN_1, 0x0014);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* INR CM_ENA=0, R_IP_SEL_N=10, R_IP_SEL_P=01, R_MODE=00 */
result = WM8904_WriteRegister(handle, WM8904_ANALOG_RIGHT_IN_1, 0x0014);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* LINMUTE=0, LIN_VOL=0_0101 */
result = WM8904_WriteRegister(handle, WM8904_ANALOG_LEFT_IN_0, 0x0005);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* RINMUTE=0, RIN VOL=0_0101 LINEOUTL RMV SHORT-1, LINEOUTL ENA_OUTP=1,
* LINEOUTL_ENA_DLY=1, LINEOUTL_ENA=1, LINEOUTR_RMV_SHORT-1,
* LINEOUTR_ENA_OUTP=1 */
result = WM8904_WriteRegister(handle, WM8904_ANALOG_RIGHT_IN_0, 0x0005);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* HPL_BYP_ENA=0, HPR_BYP_ENA=0, LINEOUTL_BYP ENA=0, LINEOUTR_BYP ENA=0 */
result = WM8904_WriteRegister(handle, WM8904_ANALOG_OUT12_ZC, 0x0000);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* HPOUTL_MUTE=0, HPOUT_VU=0, HPOUTLZC=0, HPOUTL_VOL=11_1001 */
result = WM8904_WriteRegister(handle, WM8904_ANALOG_OUT1_LEFT, 0x0039);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* HPOUTR_MUTE=0, HPOUT_VU=0, HPOUTRZC=0, HPOUTR_VOL=11_1001 */
result = WM8904_WriteRegister(handle, WM8904_ANALOG_OUT1_RIGHT, 0x0039);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* Enable DC servos for headphone out */
result = WM8904_WriteRegister(handle, WM8904_DC_SERVO_0, 0x0003);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* HPL_RMV_SHORT=1, HPL_ENA_OUTP=1, HPL_ENA_DLY=1, HPL_ENA=1,
* HPR_RMV_SHORT=1, HPR_ENA_OUTP=1, HPR_ENA_DLY=1, HPR_ENA=1 */
result = WM8904_WriteRegister(handle, WM8904_ANALOG_HP_0, 0x00FF);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* CP_DYN_PWR=1 */
result = WM8904_WriteRegister(handle, WM8904_CLS_W_0, 0x0001);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* CP_ENA=1 */
result = WM8904_WriteRegister(handle, WM8904_CHRG_PUMP_0, 0x0001);
if (result != kStatus_WM8904_Success)
{
return result;
}
result = WM8904_SetMasterSlave(handle, config->master);
if (result != kStatus_WM8904_Success)
{
return result;
}
result = WM8904_SetProtocol(handle, config->protocol);
if (result != kStatus_WM8904_Success)
{
return result;
}
result = WM8904_SetAudioFormat(handle, &(config->format));
if (result != kStatus_WM8904_Success)
{
return result;
}
return kStatus_WM8904_Success;
}
status_t WM8904_Deinit(wm8904_handle_t *handle)
{
/* reset */
return WM8904_WriteRegister(handle, WM8904_RESET, 0x0000);
}
void WM8904_GetDefaultConfig(wm8904_config_t *config)
{
memset(config, 0, sizeof(wm8904_config_t));
config->master = false;
config->protocol = kWM8904_ProtocolI2S;
config->format.fsRatio = kWM8904_FsRatio64X;
config->format.sampleRate = kWM8904_SampleRate48kHz;
config->format.bitWidth = kWM8904_BitWidth16;
}
status_t WM8904_SetMasterSlave(wm8904_handle_t *handle, bool master)
{
if (master)
{
/* only slave currently supported */
return kStatus_WM8904_Fail;
}
return kStatus_WM8904_Success;
}
status_t WM8904_SetProtocol(wm8904_handle_t *handle, wm8904_protocol_t protocol)
{
return WM8904_ModifyRegister(handle, WM8904_AUDIO_IF_1, 0x0003, (uint16_t)protocol);
}
status_t WM8904_SetAudioFormat(wm8904_handle_t *handle, wm8904_audio_format_t *format)
{
status_t result;
/* Disable SYSCLK */
result = WM8904_WriteRegister(handle, WM8904_CLK_RATES_2, 0x00);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* Set Clock ratio and sample rate */
result = WM8904_WriteRegister(handle, WM8904_CLK_RATES_1, ((uint32_t)format->fsRatio << 10) | format->sampleRate);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* Set bit resolution */
result = WM8904_ModifyRegister(handle, WM8904_AUDIO_IF_1, 0x000C, (uint16_t)format->bitWidth);
if (result != kStatus_WM8904_Success)
{
return result;
}
/* Enable SYSCLK */
result = WM8904_WriteRegister(handle, WM8904_CLK_RATES_2, 0x1007);
if (result != kStatus_WM8904_Success)
{
return result;
}
return kStatus_WM8904_Success;
}
status_t WM8904_SetVolume(wm8904_handle_t *handle, uint16_t volumeLeft, uint16_t volumeRight)
{
status_t result;
result = WM8904_ModifyRegister(handle, WM8904_ANALOG_OUT1_LEFT, 0x3F, volumeLeft);
if (result != kStatus_WM8904_Success)
{
return result;
}
result = WM8904_ModifyRegister(handle, WM8904_ANALOG_OUT1_RIGHT, 0xBF, volumeRight | 0x0080);
if (result != kStatus_WM8904_Success)
{
return result;
}
return kStatus_WM8904_Success;
}
status_t WM8904_SetMute(wm8904_handle_t *handle, bool muteLeft, bool muteRight)
{
status_t result;
uint16_t left = muteLeft ? 0x0100 : 0x0000;
uint16_t right = muteRight ? 0x0100 : 0x0000;
result = WM8904_ModifyRegister(handle, WM8904_ANALOG_OUT1_LEFT, 0x0100, left);
if (result != kStatus_WM8904_Success)
{
return result;
}
result = WM8904_ModifyRegister(handle, WM8904_ANALOG_OUT1_RIGHT, 0x0180, right | 0x0080);
if (result != kStatus_WM8904_Success)
{
return result;
}
return kStatus_WM8904_Success;
}
status_t WM8904_PrintRegisters(wm8904_handle_t *handle)
{
status_t result;
uint16_t value;
uint32_t i;
for (i = 0; i < sizeof(allRegisters); i++)
{
result = WM8904_ReadRegister(handle, allRegisters[i], &value);
if (result != kStatus_WM8904_Success)
{
PRINTF("\r\n");
return result;
}
PRINTF("%s", ((i % 8) == 0) ? "\r\n" : "\t");
PRINTF("%02X:%04X", allRegisters[i], value);
}
PRINTF("\r\n");
return result;
}
static status_t WM8904_WaitOnWriteSequencer(wm8904_handle_t *handle)
{
status_t result;
uint16_t value;
do
{
result = WM8904_ReadRegister(handle, WM8904_WRT_SEQUENCER_4, &value);
}
while ((result == kStatus_WM8904_Success) && (value & 1));
return result;
}
static status_t WM8904_WriteRegister(wm8904_handle_t *handle, uint8_t reg, uint16_t value)
{
rt_size_t result;
struct rt_i2c_msg msgs;
uint8_t buffer[3];
buffer[0] = reg;
buffer[1] = (value >> 8U) & 0xFFU;
buffer[2] = value & 0xFFU;
msgs.addr = WM8904_I2C_ADDRESS;
msgs.flags = RT_I2C_WR;
msgs.buf = buffer;
msgs.len = sizeof(buffer);
result = rt_i2c_transfer(handle->i2c, &msgs, 1);
if (result == 1)
{
return kStatus_WM8904_Success;
}
else
{
return kStatus_WM8904_Fail;
}
}
static status_t WM8904_ReadRegister(wm8904_handle_t *handle, uint8_t reg, uint16_t *value)
{
rt_size_t result;
struct rt_i2c_msg msgs[2];
uint8_t buffer[2] = {0};
uint8_t write_buffer;
*value = 0x0000U;
write_buffer = reg;
msgs[0].addr = WM8904_I2C_ADDRESS;
msgs[0].flags = RT_I2C_WR;
msgs[0].buf = &write_buffer;
msgs[0].len = 1;
msgs[1].addr = WM8904_I2C_ADDRESS;
msgs[1].flags = RT_I2C_RD;
msgs[1].buf = buffer;
msgs[1].len = 2;
result = rt_i2c_transfer(handle->i2c, msgs, 2);
if (result != 2)
{
return kStatus_WM8904_Fail;
}
*value = (uint16_t)((((uint32_t)buffer[0]) << 8U) | ((uint32_t)buffer[1]));
return kStatus_WM8904_Success;
}
static status_t WM8904_ModifyRegister(wm8904_handle_t *handle, uint8_t reg, uint16_t mask, uint16_t value)
{
status_t result;
uint16_t regValue;
result = WM8904_ReadRegister(handle, reg, &regValue);
if (result != kStatus_WM8904_Success)
{
return result;
}
regValue &= (uint16_t)~mask;
regValue |= value;
return WM8904_WriteRegister(handle, reg, regValue);
}
View Git Blame Copy Permalink