rt-thread/bsp/ck802/libraries/include/drv_aes.h

190 lines
6.4 KiB
C

/*
* Copyright (C) 2017 C-SKY Microsystems Co., Ltd. All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/******************************************************************************
* @file drv_aes.h
* @brief Header File for AES Driver
* @version V1.0
* @date 02. June 2017
******************************************************************************/
#ifndef _CSI_AES_H_
#define _CSI_AES_H_
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include <drv_common.h>
#include <drv_errno.h>
/// definition for aes handle.
typedef void *aes_handle_t;
/****** AES specific error codes *****/
typedef enum {
AES_ERROR_MODE = (EDRV_SPECIFIC + 1) , ///< Specified Mode not supported
AES_ERROR_DATA_BITS , ///< Specified number of Data bits not supported
AES_ERROR_ENDIAN ///< Specified endian not supported
} drv_aes_error_e;
/*----- AES Control Codes: Mode -----*/
typedef enum {
AES_MODE_ECB = 0, ///< ECB Mode
AES_MODE_CBC , ///< CBC Mode
AES_MODE_CFB , ///< CFB Mode
AES_MODE_OFB , ///< OFB Mode
AES_MODE_CTR ///< CTR Mode
} aes_mode_e;
/*----- AES Control Codes: Crypto Mode -----*/
typedef enum {
AES_CRYPTO_MODE_ENCRYPT = 0, ///< encrypt Mode
AES_CRYPTO_MODE_DECRYPT , ///< decrypt Mode
} aes_crypto_mode_e;
/*----- AES Control Codes: Padding Mode -----*/
typedef enum {
AES_PADDING_MODE_NO = 0, ///< NO-PADDING
AES_PADDING_MODE_ZERO , ///< ZERO-PADDING
AES_PADDING_MODE_PKCS5 ///< PKCS5-PADDING
} aes_padding_mode_e;
/*----- AES Control Codes: Mode Parameters: Key length -----*/
typedef enum {
AES_KEY_LEN_BITS_128 = 0, ///< 128 Data bits
AES_KEY_LEN_BITS_192 , ///< 192 Data bits
AES_KEY_LEN_BITS_256 ///< 256 Data bits
} aes_key_len_bits_e;
/*----- AES Control Codes: Mode Parameters: Endian -----*/
typedef enum {
AES_ENDIAN_LITTLE = 0, ///< Little Endian
AES_ENDIAN_BIG ///< Big Endian
} aes_endian_mode_e;
/**
\brief AES Status
*/
typedef struct {
uint32_t busy : 1; ///< busy flag
} aes_status_t;
/****** AES Event *****/
typedef enum {
AES_EVENT_CRYPTO_COMPLETE = 0 ///< Encrypt completed
} aes_event_e;
typedef void (*aes_event_cb_t)(aes_event_e event); ///< Pointer to \ref aes_event_cb_t : AES Event call back.
/**
\brief AES Device Driver Capabilities.
*/
typedef struct {
uint32_t ecb_mode : 1; ///< supports ECB mode
uint32_t cbc_mode : 1; ///< supports CBC mode
uint32_t cfb_mode : 1; ///< supports CFB mode
uint32_t ofb_mode : 1; ///< supports OFB mode
uint32_t ctr_mode : 1; ///< supports CTR mode
uint32_t bits_128 : 1; ///< supports 128bits key length
uint32_t bits_192 : 1; ///< supports 192bits key length
uint32_t bits_256 : 1; ///< supports 256bits key length
} aes_capabilities_t;
// Function documentation
/**
\brief get aes instance count.
\return aes handle count
*/
int32_t csi_aes_get_instance_count(void);
/**
\brief Initialize AES Interface. 1. Initializes the resources needed for the AES interface 2.registers event callback function
\param[in] idx must not exceed return value of csi_aes_get_instance_count().
\param[in] cb_event Pointer to \ref aes_event_cb_t
\return return aes handle if success
*/
aes_handle_t csi_aes_initialize(int32_t idx, aes_event_cb_t cb_event);
/**
\brief De-initialize AES Interface. stops operation and releases the software resources used by the interface
\param[in] handle aes handle to operate.
\return error code
*/
int32_t csi_aes_uninitialize(aes_handle_t handle);
/**
\brief Get driver capabilities.
\param[in] handle aes handle to operate.
\return \ref aes_capabilities_t
*/
aes_capabilities_t csi_aes_get_capabilities(aes_handle_t handle);
/**
\brief config aes mode.
\param[in] handle aes handle to operate.
\param[in] mode \ref aes_mode_e
\param[in] keylen_bits \ref aes_key_len_bits_e
\param[in] endian \ref aes_endian_mode_e
\param[in] arg Pointer to the iv address when mode is cbc_mode
\return error code
*/
int32_t csi_aes_config(aes_handle_t handle,
aes_mode_e mode,
aes_key_len_bits_e keylen_bits,
aes_endian_mode_e endian,
uint32_t arg
);
/**
\brief set crypto key.
\param[in] handle aes handle to operate.
\param[in] context aes information context(NULL when hardware implementation)
\param[in] key Pointer to the key buf
\param[in] key_len the key len
\param[in] enc \ref aes_crypto_mode_e
\return error code
*/
int32_t csi_aes_set_key(aes_handle_t handle, void *context, void *key, uint32_t key_len, aes_crypto_mode_e enc);
/**
\brief encrypt or decrypt
\param[in] handle aes handle to operate.
\param[in] context aes information context(NULL when hardware implementation)
\param[in] in Pointer to the Source data
\param[out] out Pointer to the Result data.
\param[in] len the Source data len.
\param[in] padding \ref aes_padding_mode_e.
\return error code
*/
int32_t csi_aes_crypto(aes_handle_t handle, void *context, void *in, void *out, uint32_t len, aes_padding_mode_e padding);
/**
\brief Get AES status.
\param[in] handle aes handle to operate.
\return AES status \ref aes_status_t
*/
aes_status_t csi_aes_get_status(aes_handle_t handle);
#ifdef __cplusplus
}
#endif
#endif /* _CSI_AES_H_ */