rt-thread/bsp/k210/driver/drv_uart.c

454 lines
12 KiB
C

/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
*/
#include <rthw.h>
#include <rtthread.h>
#include <rtdevice.h>
#include "board.h"
#include "drv_uart.h"
#include <stdio.h>
#include <sysctl.h>
#include "uart.h"
#include "uarths.h"
#include "plic.h"
#define UART_DEFAULT_BAUDRATE 115200
static volatile uarths_t *const _uarths = (volatile uarths_t *)UARTHS_BASE_ADDR;
struct device_uart
{
rt_uint32_t hw_base;
rt_uint32_t irqno;
};
static rt_err_t rt_uarths_configure(struct rt_serial_device *serial, struct serial_configure *cfg);
static rt_err_t uarths_control(struct rt_serial_device *serial, int cmd, void *arg);
static int drv_uarths_putc(struct rt_serial_device *serial, char c);
static int drv_uarths_getc(struct rt_serial_device *serial);
static void uarths_irq_handler(int irqno, void *param);
static rt_err_t rt_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg);
static rt_err_t uart_control(struct rt_serial_device *serial, int cmd, void *arg);
static int drv_uart_putc(struct rt_serial_device *serial, char c);
static int drv_uart_getc(struct rt_serial_device *serial);
static void uart_irq_handler(int irqno, void *param);
const struct rt_uart_ops _uart_hs_ops =
{
rt_uarths_configure,
uarths_control,
drv_uarths_putc,
drv_uarths_getc,
RT_NULL
};
const struct rt_uart_ops _uart_ops =
{
rt_uart_configure,
uart_control,
drv_uart_putc,
drv_uart_getc,
//TODO: add DMA support
RT_NULL
};
/* START ported from kendryte standalone sdk uart.c */
#define __UART_BRATE_CONST 16
volatile uart_t* const _uart[3] =
{
(volatile uart_t*)UART1_BASE_ADDR,
(volatile uart_t*)UART2_BASE_ADDR,
(volatile uart_t*)UART3_BASE_ADDR
};
void _uart_init(uart_device_number_t channel)
{
sysctl_clock_enable(SYSCTL_CLOCK_UART1 + channel);
sysctl_reset(SYSCTL_RESET_UART1 + channel);
}
/* END ported from kendryte standalone sdk uart.c */
static inline uart_device_number_t _get_uart_channel(rt_uint32_t addr)
{
switch (addr)
{
case UART1_BASE_ADDR:
return UART_DEVICE_1;
case UART2_BASE_ADDR:
return UART_DEVICE_2;
case UART3_BASE_ADDR:
return UART_DEVICE_3;
default:
return UART_DEVICE_MAX;
}
}
/*
* UART Initiation
*/
int rt_hw_uart_init(void)
{
struct rt_serial_device *serial;
struct device_uart *uart;
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
#ifdef BSP_USING_UART_HS
{
static struct rt_serial_device serial_hs;
static struct device_uart uart_hs;
serial = &serial_hs;
uart = &uart_hs;
serial->ops = &_uart_hs_ops;
serial->config = config;
serial->config.baud_rate = 115200;
uart->hw_base = UARTHS_BASE_ADDR;
uart->irqno = IRQN_UARTHS_INTERRUPT;
rt_hw_serial_register(serial,
"uarths",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
}
#endif
#ifdef BSP_USING_UART1
{
static struct rt_serial_device serial1;
static struct device_uart uart1;
serial = &serial1;
uart = &uart1;
serial->ops = &_uart_ops;
serial->config = config;
serial->config.baud_rate = UART_DEFAULT_BAUDRATE;
uart->hw_base = UART1_BASE_ADDR;
uart->irqno = IRQN_UART1_INTERRUPT;
_uart_init(UART_DEVICE_1);
rt_hw_serial_register(serial,
"uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
}
#endif
#ifdef BSP_USING_UART2
{
static struct rt_serial_device serial2;
static struct device_uart uart2;
serial = &serial2;
uart = &uart2;
serial->ops = &_uart_ops;
serial->config = config;
serial->config.baud_rate = UART_DEFAULT_BAUDRATE;
uart->hw_base = UART2_BASE_ADDR;
uart->irqno = IRQN_UART2_INTERRUPT;
_uart_init(UART_DEVICE_2);
rt_hw_serial_register(serial,
"uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
}
#endif
#ifdef BSP_USING_UART3
{
static struct rt_serial_device serial3;
static struct device_uart uart3;
serial = &serial3;
uart = &uart3;
serial->ops = &_uart_ops;
serial->config = config;
serial->config.baud_rate = UART_DEFAULT_BAUDRATE;
uart->hw_base = UART3_BASE_ADDR;
uart->irqno = IRQN_UART3_INTERRUPT;
_uart_init(UART_DEVICE_3);
rt_hw_serial_register(serial,
"uart3",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
uart);
}
#endif
return 0;
}
/*
* UARTHS interface
*/
static rt_err_t rt_uarths_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
struct device_uart *uart;
uint32_t freq_hs = sysctl_clock_get_freq(SYSCTL_CLOCK_CPU);
uint16_t div_hs = freq_hs / cfg->baud_rate - 1;
RT_ASSERT(serial != RT_NULL);
serial->config = *cfg;
uart = serial->parent.user_data;
RT_ASSERT(uart != RT_NULL);
if (uart->hw_base == UARTHS_BASE_ADDR)
{
_uarths->div.div = div_hs;
_uarths->txctrl.txen = 1;
_uarths->rxctrl.rxen = 1;
_uarths->txctrl.txcnt = 0;
_uarths->rxctrl.rxcnt = 0;
_uarths->ip.txwm = 1;
_uarths->ip.rxwm = 1;
_uarths->ie.txwm = 0;
_uarths->ie.rxwm = 1;
}
else
{
return (-1);
/* other uart */
}
return (RT_EOK);
}
static rt_err_t uarths_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct device_uart *uart;
uart = serial->parent.user_data;
RT_ASSERT(uart != RT_NULL);
switch (cmd)
{
case RT_DEVICE_CTRL_CLR_INT:
/* Disable the UART Interrupt */
rt_hw_interrupt_mask(uart->irqno);
break;
case RT_DEVICE_CTRL_SET_INT:
/* install interrupt */
rt_hw_interrupt_install(uart->irqno, uarths_irq_handler,
serial, serial->parent.parent.name);
rt_hw_interrupt_umask(uart->irqno);
break;
}
return (RT_EOK);
}
static int drv_uarths_putc(struct rt_serial_device *serial, char c)
{
struct device_uart *uart = serial->parent.user_data;
RT_ASSERT(uart->hw_base == UARTHS_BASE_ADDR);
while (_uarths->txdata.full);
_uarths->txdata.data = (uint8_t)c;
return (1);
}
static int drv_uarths_getc(struct rt_serial_device *serial)
{
struct device_uart *uart = serial->parent.user_data;
RT_ASSERT(uart->hw_base == UARTHS_BASE_ADDR);
uarths_rxdata_t recv = _uarths->rxdata;
if (recv.empty)
return EOF;
else
return (recv.data & 0xff);
/* Receive Data Available */
return (-1);
}
/* UARTHS ISR */
static void uarths_irq_handler(int irqno, void *param)
{
struct rt_serial_device *serial = (struct rt_serial_device *)param;
struct device_uart *uart = serial->parent.user_data;
RT_ASSERT(uart->hw_base == UARTHS_BASE_ADDR);
/* read interrupt status and clear it */
if (_uarths->ip.rxwm)
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
}
/*
* UART interface
*/
static rt_err_t rt_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
struct device_uart *uart;
uart_bitwidth_t data_width = (uart_bitwidth_t)cfg->data_bits ;
uart_stopbit_t stopbit = (uart_stopbit_t)cfg->stop_bits;
uart_parity_t parity = (uart_parity_t)cfg->parity;
uint32_t freq = sysctl_clock_get_freq(SYSCTL_CLOCK_APB0);
uint32_t divisor = freq / (uint32_t)cfg->baud_rate;
uint8_t dlh = divisor >> 12;
uint8_t dll = (divisor - (dlh << 12)) / __UART_BRATE_CONST;
uint8_t dlf = divisor - (dlh << 12) - dll * __UART_BRATE_CONST;
RT_ASSERT(serial != RT_NULL);
serial->config = *cfg;
uart = serial->parent.user_data;
RT_ASSERT(uart != RT_NULL);
uart_device_number_t channel = _get_uart_channel(uart->hw_base);
RT_ASSERT(channel != UART_DEVICE_MAX);
RT_ASSERT(data_width >= 5 && data_width <= 8);
if (data_width == 5)
{
RT_ASSERT(stopbit != UART_STOP_2);
}
else
{
RT_ASSERT(stopbit != UART_STOP_1_5);
}
uint32_t stopbit_val = stopbit == UART_STOP_1 ? 0 : 1;
uint32_t parity_val;
switch (parity)
{
case UART_PARITY_NONE:
parity_val = 0;
break;
case UART_PARITY_ODD:
parity_val = 1;
break;
case UART_PARITY_EVEN:
parity_val = 3;
break;
default:
RT_ASSERT(!"Invalid parity");
break;
}
_uart[channel]->LCR |= 1u << 7;
_uart[channel]->DLH = dlh;
_uart[channel]->DLL = dll;
_uart[channel]->DLF = dlf;
_uart[channel]->LCR = 0;
_uart[channel]->LCR = (data_width - 5) |
(stopbit_val << 2) |
(parity_val << 3);
_uart[channel]->LCR &= ~(1u << 7);
_uart[channel]->IER |= 0x80; /* THRE */
_uart[channel]->FCR = UART_RECEIVE_FIFO_1 << 6 |
UART_SEND_FIFO_8 << 4 |
0x1 << 3 |
0x1;
return (RT_EOK);
}
static rt_err_t uart_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct device_uart *uart;
uart = serial->parent.user_data;
uart_device_number_t channel = _get_uart_channel(uart->hw_base);
RT_ASSERT(uart != RT_NULL);
RT_ASSERT(channel != UART_DEVICE_MAX);
switch (cmd)
{
case RT_DEVICE_CTRL_CLR_INT:
/* Disable the UART Interrupt */
rt_hw_interrupt_mask(uart->irqno);
_uart[channel]->IER &= ~0x1;
break;
case RT_DEVICE_CTRL_SET_INT:
/* install interrupt */
rt_hw_interrupt_install(uart->irqno, uart_irq_handler,
serial, serial->parent.parent.name);
rt_hw_interrupt_umask(uart->irqno);
_uart[channel]->IER |= 0x1;
break;
}
return (RT_EOK);
}
static int drv_uart_putc(struct rt_serial_device *serial, char c)
{
struct device_uart *uart = serial->parent.user_data;
uart_device_number_t channel = _get_uart_channel(uart->hw_base);
RT_ASSERT(channel != UART_DEVICE_MAX);
while (_uart[channel]->LSR & (1u << 5));
_uart[channel]->THR = c;
return (1);
}
static int drv_uart_getc(struct rt_serial_device *serial)
{
struct device_uart *uart = serial->parent.user_data;
uart_device_number_t channel = _get_uart_channel(uart->hw_base);
RT_ASSERT(channel != UART_DEVICE_MAX);
if (_uart[channel]->LSR & 1)
return (char)(_uart[channel]->RBR & 0xff);
else
return EOF;
/* Receive Data Available */
return (-1);
}
/* UART ISR */
static void uart_irq_handler(int irqno, void *param)
{
struct rt_serial_device *serial = (struct rt_serial_device *)param;
struct device_uart *uart = serial->parent.user_data;
uart_device_number_t channel = _get_uart_channel(uart->hw_base);
RT_ASSERT(channel != UART_DEVICE_MAX);
/* read interrupt status and clear it */
if (_uart[channel]->LSR)
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
}
/* WEAK for SDK 0.5.6 */
RT_WEAK void uart_debug_init(uart_device_number_t uart_channel)
{
}