libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/nuvoton/libraries/m460/StdDriver/inc/nu_qspi.h

438 lines
18 KiB
C
Raw Blame History

/**************************************************************************//**
* @file nu_qspi.h
* @version V3.00
* @brief M460 series QSPI driver header file
*
* @copyright SPDX-License-Identifier: Apache-2.0
* @copyright Copyright (C) 2021 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef __NU_QSPI_H__
#define __NU_QSPI_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup QSPI_Driver QSPI Driver
@{
*/
/** @addtogroup QSPI_EXPORTED_CONSTANTS QSPI Exported Constants
@{
*/
#define QSPI_MODE_0 (QSPI_CTL_TXNEG_Msk) /*!< CLKPOL=0; RXNEG=0; TXNEG=1 \hideinitializer */
#define QSPI_MODE_1 (QSPI_CTL_RXNEG_Msk) /*!< CLKPOL=0; RXNEG=1; TXNEG=0 \hideinitializer */
#define QSPI_MODE_2 (QSPI_CTL_CLKPOL_Msk | QSPI_CTL_RXNEG_Msk) /*!< CLKPOL=1; RXNEG=1; TXNEG=0 \hideinitializer */
#define QSPI_MODE_3 (QSPI_CTL_CLKPOL_Msk | QSPI_CTL_TXNEG_Msk) /*!< CLKPOL=1; RXNEG=0; TXNEG=1 \hideinitializer */
#define QSPI_SLAVE (QSPI_CTL_SLAVE_Msk) /*!< Set as slave \hideinitializer */
#define QSPI_MASTER (0x0U) /*!< Set as master \hideinitializer */
#define QSPI_SS (QSPI_SSCTL_SS_Msk) /*!< Set SS \hideinitializer */
#define QSPI_SS_ACTIVE_HIGH (QSPI_SSCTL_SSACTPOL_Msk) /*!< SS active high \hideinitializer */
#define QSPI_SS_ACTIVE_LOW (0x0U) /*!< SS active low \hideinitializer */
/* QSPI Interrupt Mask */
#define QSPI_UNIT_INT_MASK (0x001U) /*!< Unit transfer interrupt mask \hideinitializer */
#define QSPI_SSACT_INT_MASK (0x002U) /*!< Slave selection signal active interrupt mask \hideinitializer */
#define QSPI_SSINACT_INT_MASK (0x004U) /*!< Slave selection signal inactive interrupt mask \hideinitializer */
#define QSPI_SLVUR_INT_MASK (0x008U) /*!< Slave under run interrupt mask \hideinitializer */
#define QSPI_SLVBE_INT_MASK (0x010U) /*!< Slave bit count error interrupt mask \hideinitializer */
#define QSPI_SLVTO_INT_MASK (0x020U) /*!< Slave mode time-out interrupt mask \hideinitializer */
#define QSPI_TXUF_INT_MASK (0x040U) /*!< Slave TX underflow interrupt mask \hideinitializer */
#define QSPI_FIFO_TXTH_INT_MASK (0x080U) /*!< FIFO TX threshold interrupt mask \hideinitializer */
#define QSPI_FIFO_RXTH_INT_MASK (0x100U) /*!< FIFO RX threshold interrupt mask \hideinitializer */
#define QSPI_FIFO_RXOV_INT_MASK (0x200U) /*!< FIFO RX overrun interrupt mask \hideinitializer */
#define QSPI_FIFO_RXTO_INT_MASK (0x400U) /*!< FIFO RX time-out interrupt mask \hideinitializer */
/* QSPI Status Mask */
#define QSPI_BUSY_MASK (0x01U) /*!< Busy status mask \hideinitializer */
#define QSPI_RX_EMPTY_MASK (0x02U) /*!< RX empty status mask \hideinitializer */
#define QSPI_RX_FULL_MASK (0x04U) /*!< RX full status mask \hideinitializer */
#define QSPI_TX_EMPTY_MASK (0x08U) /*!< TX empty status mask \hideinitializer */
#define QSPI_TX_FULL_MASK (0x10U) /*!< TX full status mask \hideinitializer */
#define QSPI_TXRX_RESET_MASK (0x20U) /*!< TX or RX reset status mask \hideinitializer */
#define QSPI_SPIEN_STS_MASK (0x40U) /*!< SPIEN status mask \hideinitializer */
#define QSPI_SSLINE_STS_MASK (0x80U) /*!< QSPIx_SS line status mask \hideinitializer */
/* QSPI Status2 Mask */
#define QSPI_SLVBENUM_MASK (0x01U) /*!< Effective bit number of uncompleted RX data status mask \hideinitializer */
/*@}*/ /* end of group QSPI_EXPORTED_CONSTANTS */
/** @addtogroup QSPI_EXPORTED_FUNCTIONS QSPI Exported Functions
@{
*/
/**
* @brief Clear the unit transfer interrupt flag.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Write 1 to UNITIF bit of QSPI_STATUS register to clear the unit transfer interrupt flag.
* \hideinitializer
*/
#define QSPI_CLR_UNIT_TRANS_INT_FLAG(qspi) ( (qspi)->STATUS = QSPI_STATUS_UNITIF_Msk )
/**
* @brief Disable 2-bit Transfer mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear TWOBIT bit of QSPI_CTL register to disable 2-bit Transfer mode.
* \hideinitializer
*/
#define QSPI_DISABLE_2BIT_MODE(qspi) ( (qspi)->CTL &= ~QSPI_CTL_TWOBIT_Msk )
/**
* @brief Disable Slave 3-wire mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear SLV3WIRE bit of QSPI_SSCTL register to disable Slave 3-wire mode.
* \hideinitializer
*/
#define QSPI_DISABLE_3WIRE_MODE(qspi) ( (qspi)->SSCTL &= ~QSPI_SSCTL_SLV3WIRE_Msk )
/**
* @brief Disable Dual I/O mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear DUALIOEN bit of QSPI_CTL register to disable Dual I/O mode.
* \hideinitializer
*/
#define QSPI_DISABLE_DUAL_MODE(qspi) ( (qspi)->CTL &= ~QSPI_CTL_DUALIOEN_Msk )
/**
* @brief Disable Quad I/O mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear QUADIOEN bit of QSPI_CTL register to disable Quad I/O mode.
* \hideinitializer
*/
#define QSPI_DISABLE_QUAD_MODE(qspi) ( (qspi)->CTL &= ~QSPI_CTL_QUADIOEN_Msk )
/**
* @brief Disable TX DTR mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear TXDTREN bit of QSPI_CTL register to disable TX DTR mode.
* \hideinitializer
*/
#define QSPI_DISABLE_TXDTR_MODE(qspi) ( (qspi)->CTL &= ~QSPI_CTL_TXDTREN_Msk )
/**
* @brief Enable 2-bit Transfer mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Set TWOBIT bit of QSPI_CTL register to enable 2-bit Transfer mode.
* \hideinitializer
*/
#define QSPI_ENABLE_2BIT_MODE(qspi) ( (qspi)->CTL |= QSPI_CTL_TWOBIT_Msk )
/**
* @brief Enable Slave 3-wire mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Set SLV3WIRE bit of QSPI_SSCTL register to enable Slave 3-wire mode.
* \hideinitializer
*/
#define QSPI_ENABLE_3WIRE_MODE(qspi) ( (qspi)->SSCTL |= QSPI_SSCTL_SLV3WIRE_Msk )
/**
* @brief Enable Dual input mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear DATDIR bit and set DUALIOEN bit of QSPI_CTL register to enable Dual input mode.
* \hideinitializer
*/
#define QSPI_ENABLE_DUAL_INPUT_MODE(qspi) ( (qspi)->CTL = ((qspi)->CTL & (~QSPI_CTL_DATDIR_Msk)) | QSPI_CTL_DUALIOEN_Msk )
/**
* @brief Enable Dual output mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Set DATDIR bit and DUALIOEN bit of QSPI_CTL register to enable Dual output mode.
* \hideinitializer
*/
#define QSPI_ENABLE_DUAL_OUTPUT_MODE(qspi) ( (qspi)->CTL |= (QSPI_CTL_DATDIR_Msk | QSPI_CTL_DUALIOEN_Msk) )
/**
* @brief Enable Quad input mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear DATDIR bit and set QUADIOEN bit of QSPI_CTL register to enable Quad input mode.
* \hideinitializer
*/
#define QSPI_ENABLE_QUAD_INPUT_MODE(qspi) ( (qspi)->CTL = ((qspi)->CTL & (~QSPI_CTL_DATDIR_Msk)) | QSPI_CTL_QUADIOEN_Msk )
/**
* @brief Enable Quad output mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Set DATDIR bit and QUADIOEN bit of QSPI_CTL register to enable Quad output mode.
* \hideinitializer
*/
#define QSPI_ENABLE_QUAD_OUTPUT_MODE(qspi) ( (qspi)->CTL |= (QSPI_CTL_DATDIR_Msk | QSPI_CTL_QUADIOEN_Msk) )
/**
* @brief Enable TX DTR mode.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Set TXDTREN bit of QSPI_CTL register to enable TX DTR mode.
* \hideinitializer
*/
#define QSPI_ENABLE_TXDTR_MODE(qspi) ( (qspi)->CTL |= QSPI_CTL_TXDTREN_Msk )
/**
* @brief Trigger RX PDMA function.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Set RXPDMAEN bit of QSPI_PDMACTL register to enable RX PDMA transfer function.
* \hideinitializer
*/
#define QSPI_TRIGGER_RX_PDMA(qspi) ( (qspi)->PDMACTL |= QSPI_PDMACTL_RXPDMAEN_Msk )
/**
* @brief Trigger TX PDMA function.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Set TXPDMAEN bit of QSPI_PDMACTL register to enable TX PDMA transfer function.
* \hideinitializer
*/
#define QSPI_TRIGGER_TX_PDMA(qspi) ( (qspi)->PDMACTL |= QSPI_PDMACTL_TXPDMAEN_Msk )
/**
* @brief Trigger TX and RX PDMA function.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Set TXPDMAEN bit and RXPDMAEN bit of QSPI_PDMACTL register to enable TX and RX PDMA transfer function.
* \hideinitializer
*/
#define QSPI_TRIGGER_TX_RX_PDMA(qspi) ( (qspi)->PDMACTL |= (QSPI_PDMACTL_TXPDMAEN_Msk | QSPI_PDMACTL_RXPDMAEN_Msk) )
/**
* @brief Disable RX PDMA transfer.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear RXPDMAEN bit of QSPI_PDMACTL register to disable RX PDMA transfer function.
* \hideinitializer
*/
#define QSPI_DISABLE_RX_PDMA(qspi) ( (qspi)->PDMACTL &= ~QSPI_PDMACTL_RXPDMAEN_Msk )
/**
* @brief Disable TX PDMA transfer.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear TXPDMAEN bit of QSPI_PDMACTL register to disable TX PDMA transfer function.
* \hideinitializer
*/
#define QSPI_DISABLE_TX_PDMA(qspi) ( (qspi)->PDMACTL &= ~QSPI_PDMACTL_TXPDMAEN_Msk )
/**
* @brief Disable TX and RX PDMA transfer.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear TXPDMAEN bit and RXPDMAEN bit of QSPI_PDMACTL register to disable TX and RX PDMA transfer function.
* \hideinitializer
*/
#define QSPI_DISABLE_TX_RX_PDMA(qspi) ( (qspi)->PDMACTL &= ~(QSPI_PDMACTL_TXPDMAEN_Msk | QSPI_PDMACTL_RXPDMAEN_Msk) )
/**
* @brief Get the count of available data in RX FIFO.
* @param[in] qspi The pointer of the specified QSPI module.
* @return The count of available data in RX FIFO.
* @details Read RXCNT (QSPI_STATUS[27:24]) to get the count of available data in RX FIFO.
* \hideinitializer
*/
#define QSPI_GET_RX_FIFO_COUNT(qspi) ( ((qspi)->STATUS & QSPI_STATUS_RXCNT_Msk) >> QSPI_STATUS_RXCNT_Pos )
/**
* @brief Get the RX FIFO empty flag.
* @param[in] qspi The pointer of the specified QSPI module.
* @retval 0 RX FIFO is not empty.
* @retval 1 RX FIFO is empty.
* @details Read RXEMPTY bit of QSPI_STATUS register to get the RX FIFO empty flag.
* \hideinitializer
*/
#define QSPI_GET_RX_FIFO_EMPTY_FLAG(qspi) ( ((qspi)->STATUS & QSPI_STATUS_RXEMPTY_Msk) >> QSPI_STATUS_RXEMPTY_Pos )
/**
* @brief Get the TX FIFO empty flag.
* @param[in] qspi The pointer of the specified QSPI module.
* @retval 0 TX FIFO is not empty.
* @retval 1 TX FIFO is empty.
* @details Read TXEMPTY bit of QSPI_STATUS register to get the TX FIFO empty flag.
* \hideinitializer
*/
#define QSPI_GET_TX_FIFO_EMPTY_FLAG(qspi) ( ((qspi)->STATUS & QSPI_STATUS_TXEMPTY_Msk) >> QSPI_STATUS_TXEMPTY_Pos )
/**
* @brief Get the TX FIFO full flag.
* @param[in] qspi The pointer of the specified QSPI module.
* @retval 0 TX FIFO is not full.
* @retval 1 TX FIFO is full.
* @details Read TXFULL bit of QSPI_STATUS register to get the TX FIFO full flag.
* \hideinitializer
*/
#define QSPI_GET_TX_FIFO_FULL_FLAG(qspi) ( ((qspi)->STATUS & QSPI_STATUS_TXFULL_Msk) >> QSPI_STATUS_TXFULL_Pos )
/**
* @brief Get the datum read from RX register.
* @param[in] qspi The pointer of the specified QSPI module.
* @return Data in RX register.
* @details Read QSPI_RX register to get the received datum.
* \hideinitializer
*/
#define QSPI_READ_RX(qspi) ( (qspi)->RX )
/**
* @brief Write datum to TX register.
* @param[in] qspi The pointer of the specified QSPI module.
* @param[in] u32TxData The datum which user attempt to transfer through QSPI bus.
* @return None.
* @details Write u32TxData to QSPI_TX register.
* \hideinitializer
*/
#define QSPI_WRITE_TX(qspi, u32TxData) ( (qspi)->TX = (u32TxData) )
/**
* @brief Set QSPIx_SS pin to high state.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Disable automatic slave selection function and set QSPIx_SS pin to high state.
* \hideinitializer
*/
#define QSPI_SET_SS_HIGH(qspi) ( (qspi)->SSCTL = ((qspi)->SSCTL & (~QSPI_SSCTL_AUTOSS_Msk)) | (QSPI_SSCTL_SSACTPOL_Msk | QSPI_SSCTL_SS_Msk) )
/**
* @brief Set QSPIx_SS pin to low state.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Disable automatic slave selection function and set QSPIx_SS pin to low state.
* \hideinitializer
*/
#define QSPI_SET_SS_LOW(qspi) ( (qspi)->SSCTL = ((qspi)->SSCTL & (~(QSPI_SSCTL_AUTOSS_Msk | QSPI_SSCTL_SSACTPOL_Msk))) | QSPI_SSCTL_SS_Msk )
/**
* @brief Enable Byte Reorder function.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Enable Byte Reorder function. The suspend interval depends on the setting of SUSPITV (QSPI_CTL[7:4]).
* \hideinitializer
*/
#define QSPI_ENABLE_BYTE_REORDER(qspi) ( (qspi)->CTL |= QSPI_CTL_REORDER_Msk )
/**
* @brief Disable Byte Reorder function.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear REORDER bit field of QSPI_CTL register to disable Byte Reorder function.
* \hideinitializer
*/
#define QSPI_DISABLE_BYTE_REORDER(qspi) ( (qspi)->CTL &= ~QSPI_CTL_REORDER_Msk )
/**
* @brief Set the length of suspend interval.
* @param[in] qspi The pointer of the specified QSPI module.
* @param[in] u32SuspCycle Decides the length of suspend interval. It could be 0 ~ 15.
* @return None.
* @details Set the length of suspend interval according to u32SuspCycle.
* The length of suspend interval is ((u32SuspCycle + 0.5) * the length of one QSPI bus clock cycle).
* \hideinitializer
*/
#define QSPI_SET_SUSPEND_CYCLE(qspi, u32SuspCycle) ( (qspi)->CTL = ((qspi)->CTL & ~QSPI_CTL_SUSPITV_Msk) | ((u32SuspCycle) << QSPI_CTL_SUSPITV_Pos) )
/**
* @brief Set the QSPI transfer sequence with LSB first.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Set LSB bit of QSPI_CTL register to set the QSPI transfer sequence with LSB first.
* \hideinitializer
*/
#define QSPI_SET_LSB_FIRST(qspi) ( (qspi)->CTL |= QSPI_CTL_LSB_Msk )
/**
* @brief Set the QSPI transfer sequence with MSB first.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear LSB bit of QSPI_CTL register to set the QSPI transfer sequence with MSB first.
* \hideinitializer
*/
#define QSPI_SET_MSB_FIRST(qspi) ( (qspi)->CTL &= ~QSPI_CTL_LSB_Msk )
/**
* @brief Set the data width of a QSPI transaction.
* @param[in] qspi The pointer of the specified QSPI module.
* @param[in] u32Width The bit width of one transaction.
* @return None.
* @details The data width can be 8 ~ 32 bits.
* \hideinitializer
*/
#define QSPI_SET_DATA_WIDTH(qspi, u32Width) ( (qspi)->CTL = ((qspi)->CTL & ~QSPI_CTL_DWIDTH_Msk) | (((u32Width) & 0x1F) << QSPI_CTL_DWIDTH_Pos) )
/**
* @brief Get the QSPI busy state.
* @param[in] qspi The pointer of the specified QSPI module.
* @retval 0 QSPI controller is not busy.
* @retval 1 QSPI controller is busy.
* @details This macro will return the busy state of QSPI controller.
* \hideinitializer
*/
#define QSPI_IS_BUSY(qspi) ( ((qspi)->STATUS & QSPI_STATUS_BUSY_Msk) >> QSPI_STATUS_BUSY_Pos )
/**
* @brief Enable QSPI controller.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Set SPIEN (QSPI_CTL[0]) to enable QSPI controller.
* \hideinitializer
*/
#define QSPI_ENABLE(qspi) ( (qspi)->CTL |= QSPI_CTL_SPIEN_Msk )
/**
* @brief Disable QSPI controller.
* @param[in] qspi The pointer of the specified QSPI module.
* @return None.
* @details Clear SPIEN (QSPI_CTL[0]) to disable QSPI controller.
* \hideinitializer
*/
#define QSPI_DISABLE(qspi) ( (qspi)->CTL &= ~QSPI_CTL_SPIEN_Msk )
/* Function prototype declaration */
uint32_t QSPI_Open(QSPI_T *qspi, uint32_t u32MasterSlave, uint32_t u32QSPIMode, uint32_t u32DataWidth, uint32_t u32BusClock);
void QSPI_Close(QSPI_T *qspi);
void QSPI_ClearRxFIFO(QSPI_T *qspi);
void QSPI_ClearTxFIFO(QSPI_T *qspi);
void QSPI_DisableAutoSS(QSPI_T *qspi);
void QSPI_EnableAutoSS(QSPI_T *qspi, uint32_t u32SSPinMask, uint32_t u32ActiveLevel);
uint32_t QSPI_SetBusClock(QSPI_T *qspi, uint32_t u32BusClock);
void QSPI_SetFIFO(QSPI_T *qspi, uint32_t u32TxThreshold, uint32_t u32RxThreshold);
uint32_t QSPI_GetBusClock(QSPI_T *qspi);
void QSPI_EnableInt(QSPI_T *qspi, uint32_t u32Mask);
void QSPI_DisableInt(QSPI_T *qspi, uint32_t u32Mask);
uint32_t QSPI_GetIntFlag(QSPI_T *qspi, uint32_t u32Mask);
void QSPI_ClearIntFlag(QSPI_T *qspi, uint32_t u32Mask);
uint32_t QSPI_GetStatus(QSPI_T *qspi, uint32_t u32Mask);
uint32_t QSPI_GetStatus2(QSPI_T *qspi, uint32_t u32Mask);
/*@}*/ /* end of group QSPI_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group QSPI_Driver */
/*@}*/ /* end of group Standard_Driver */
#ifdef __cplusplus
}
#endif
#endif /* __NU_QSPI_H__ */
View Git Blame Copy Permalink