565 lines
36 KiB
C
565 lines
36 KiB
C
/**************************************************************************//**
|
|
* @file nu_gpio.h
|
|
* @version V3.00
|
|
* @brief M460 series GPIO driver header file
|
|
*
|
|
* @copyright SPDX-License-Identifier: Apache-2.0
|
|
* @copyright Copyright (C) 2021 Nuvoton Technology Corp. All rights reserved.
|
|
******************************************************************************/
|
|
#ifndef __NU_GPIO_H__
|
|
#define __NU_GPIO_H__
|
|
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
/** @addtogroup Standard_Driver Standard Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup GPIO_Driver GPIO Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup GPIO_EXPORTED_CONSTANTS GPIO Exported Constants
|
|
@{
|
|
*/
|
|
|
|
|
|
#define GPIO_PIN_MAX 16UL /*!< Specify Maximum Pins of Each GPIO Port \hideinitializer */
|
|
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* GPIO_MODE Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define GPIO_MODE_INPUT 0x0UL /*!< Input Mode \hideinitializer */
|
|
#define GPIO_MODE_OUTPUT 0x1UL /*!< Output Mode \hideinitializer */
|
|
#define GPIO_MODE_OPEN_DRAIN 0x2UL /*!< Open-Drain Mode \hideinitializer */
|
|
#define GPIO_MODE_QUASI 0x3UL /*!< Quasi-bidirectional Mode \hideinitializer */
|
|
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* GPIO Interrupt Type Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define GPIO_INT_RISING 0x00010000UL /*!< Interrupt enable by Input Rising Edge \hideinitializer */
|
|
#define GPIO_INT_FALLING 0x00000001UL /*!< Interrupt enable by Input Falling Edge \hideinitializer */
|
|
#define GPIO_INT_BOTH_EDGE 0x00010001UL /*!< Interrupt enable by both Rising Edge and Falling Edge \hideinitializer */
|
|
#define GPIO_INT_HIGH 0x01010000UL /*!< Interrupt enable by Level-High \hideinitializer */
|
|
#define GPIO_INT_LOW 0x01000001UL /*!< Interrupt enable by Level-Level \hideinitializer */
|
|
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* GPIO_INTTYPE Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define GPIO_INTTYPE_EDGE 0UL /*!< GPIO_INTTYPE Setting for Edge Trigger Mode \hideinitializer */
|
|
#define GPIO_INTTYPE_LEVEL 1UL /*!< GPIO_INTTYPE Setting for Edge Level Mode \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* GPIO Slew Rate Type Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define GPIO_SLEWCTL_NORMAL 0x0UL /*!< GPIO slew setting for normal Mode \hideinitializer */
|
|
#define GPIO_SLEWCTL_HIGH 0x1UL /*!< GPIO slew setting for high Mode \hideinitializer */
|
|
#define GPIO_SLEWCTL_FAST 0x2UL /*!< GPIO slew setting for fast Mode \hideinitializer */
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* GPIO Pull-up And Pull-down Type Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define GPIO_PUSEL_DISABLE 0x0UL /*!< GPIO PUSEL setting for Disable Mode \hideinitializer */
|
|
#define GPIO_PUSEL_PULL_UP 0x1UL /*!< GPIO PUSEL setting for Pull-up Mode \hideinitializer */
|
|
#define GPIO_PUSEL_PULL_DOWN 0x2UL /*!< GPIO PUSEL setting for Pull-down Mode \hideinitializer */
|
|
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* GPIO_DBCTL Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define GPIO_DBCTL_ICLK_ON 0x00000020UL /*!< GPIO_DBCTL setting for all IO pins edge detection circuit is always active after reset \hideinitializer */
|
|
#define GPIO_DBCTL_ICLK_OFF 0x00000000UL /*!< GPIO_DBCTL setting for edge detection circuit is active only if IO pin corresponding GPIOx_IEN bit is set to 1 \hideinitializer */
|
|
|
|
#define GPIO_DBCTL_DBCLKSRC_LIRC 0x00000010UL /*!< GPIO_DBCTL setting for de-bounce counter clock source is the internal 10 kHz \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSRC_HCLK 0x00000000UL /*!< GPIO_DBCTL setting for de-bounce counter clock source is the HCLK \hideinitializer */
|
|
|
|
#define GPIO_DBCTL_DBCLKSEL_1 0x00000000UL /*!< GPIO_DBCTL setting for sampling cycle = 1 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_2 0x00000001UL /*!< GPIO_DBCTL setting for sampling cycle = 2 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_4 0x00000002UL /*!< GPIO_DBCTL setting for sampling cycle = 4 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_8 0x00000003UL /*!< GPIO_DBCTL setting for sampling cycle = 8 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_16 0x00000004UL /*!< GPIO_DBCTL setting for sampling cycle = 16 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_32 0x00000005UL /*!< GPIO_DBCTL setting for sampling cycle = 32 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_64 0x00000006UL /*!< GPIO_DBCTL setting for sampling cycle = 64 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_128 0x00000007UL /*!< GPIO_DBCTL setting for sampling cycle = 128 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_256 0x00000008UL /*!< GPIO_DBCTL setting for sampling cycle = 256 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_512 0x00000009UL /*!< GPIO_DBCTL setting for sampling cycle = 512 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_1024 0x0000000AUL /*!< GPIO_DBCTL setting for sampling cycle = 1024 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_2048 0x0000000BUL /*!< GPIO_DBCTL setting for sampling cycle = 2048 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_4096 0x0000000CUL /*!< GPIO_DBCTL setting for sampling cycle = 4096 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_8192 0x0000000DUL /*!< GPIO_DBCTL setting for sampling cycle = 8192 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_16384 0x0000000EUL /*!< GPIO_DBCTL setting for sampling cycle = 16384 clocks \hideinitializer */
|
|
#define GPIO_DBCTL_DBCLKSEL_32768 0x0000000FUL /*!< GPIO_DBCTL setting for sampling cycle = 32768 clocks \hideinitializer */
|
|
|
|
|
|
/* Define GPIO Pin Data Input/Output. It could be used to control each I/O pin by pin address mapping.
|
|
Example 1:
|
|
|
|
PA0 = 1;
|
|
|
|
It is used to set GPIO PA.0 to high;
|
|
|
|
Example 2:
|
|
|
|
if (PA0)
|
|
PA0 = 0;
|
|
|
|
If GPIO PA.0 pin status is high, then set GPIO PA.0 data output to low.
|
|
*/
|
|
#define GPIO_PIN_DATA(port, pin) (*((volatile uint32_t *)((GPIO_PIN_DATA_BASE+(0x40*(port))) + ((pin)<<2)))) /*!< Pin Data Input/Output \hideinitializer */
|
|
#define PA0 GPIO_PIN_DATA(0, 0 ) /*!< Specify PA.0 Pin Data Input/Output \hideinitializer */
|
|
#define PA1 GPIO_PIN_DATA(0, 1 ) /*!< Specify PA.1 Pin Data Input/Output \hideinitializer */
|
|
#define PA2 GPIO_PIN_DATA(0, 2 ) /*!< Specify PA.2 Pin Data Input/Output \hideinitializer */
|
|
#define PA3 GPIO_PIN_DATA(0, 3 ) /*!< Specify PA.3 Pin Data Input/Output \hideinitializer */
|
|
#define PA4 GPIO_PIN_DATA(0, 4 ) /*!< Specify PA.4 Pin Data Input/Output \hideinitializer */
|
|
#define PA5 GPIO_PIN_DATA(0, 5 ) /*!< Specify PA.5 Pin Data Input/Output \hideinitializer */
|
|
#define PA6 GPIO_PIN_DATA(0, 6 ) /*!< Specify PA.6 Pin Data Input/Output \hideinitializer */
|
|
#define PA7 GPIO_PIN_DATA(0, 7 ) /*!< Specify PA.7 Pin Data Input/Output \hideinitializer */
|
|
#define PA8 GPIO_PIN_DATA(0, 8 ) /*!< Specify PA.8 Pin Data Input/Output \hideinitializer */
|
|
#define PA9 GPIO_PIN_DATA(0, 9 ) /*!< Specify PA.9 Pin Data Input/Output \hideinitializer */
|
|
#define PA10 GPIO_PIN_DATA(0, 10) /*!< Specify PA.10 Pin Data Input/Output \hideinitializer */
|
|
#define PA11 GPIO_PIN_DATA(0, 11) /*!< Specify PA.11 Pin Data Input/Output \hideinitializer */
|
|
#define PA12 GPIO_PIN_DATA(0, 12) /*!< Specify PA.12 Pin Data Input/Output \hideinitializer */
|
|
#define PA13 GPIO_PIN_DATA(0, 13) /*!< Specify PA.13 Pin Data Input/Output \hideinitializer */
|
|
#define PA14 GPIO_PIN_DATA(0, 14) /*!< Specify PA.14 Pin Data Input/Output \hideinitializer */
|
|
#define PA15 GPIO_PIN_DATA(0, 15) /*!< Specify PA.15 Pin Data Input/Output \hideinitializer */
|
|
#define PB0 GPIO_PIN_DATA(1, 0 ) /*!< Specify PB.0 Pin Data Input/Output \hideinitializer */
|
|
#define PB1 GPIO_PIN_DATA(1, 1 ) /*!< Specify PB.1 Pin Data Input/Output \hideinitializer */
|
|
#define PB2 GPIO_PIN_DATA(1, 2 ) /*!< Specify PB.2 Pin Data Input/Output \hideinitializer */
|
|
#define PB3 GPIO_PIN_DATA(1, 3 ) /*!< Specify PB.3 Pin Data Input/Output \hideinitializer */
|
|
#define PB4 GPIO_PIN_DATA(1, 4 ) /*!< Specify PB.4 Pin Data Input/Output \hideinitializer */
|
|
#define PB5 GPIO_PIN_DATA(1, 5 ) /*!< Specify PB.5 Pin Data Input/Output \hideinitializer */
|
|
#define PB6 GPIO_PIN_DATA(1, 6 ) /*!< Specify PB.6 Pin Data Input/Output \hideinitializer */
|
|
#define PB7 GPIO_PIN_DATA(1, 7 ) /*!< Specify PB.7 Pin Data Input/Output \hideinitializer */
|
|
#define PB8 GPIO_PIN_DATA(1, 8 ) /*!< Specify PB.8 Pin Data Input/Output \hideinitializer */
|
|
#define PB9 GPIO_PIN_DATA(1, 9 ) /*!< Specify PB.9 Pin Data Input/Output \hideinitializer */
|
|
#define PB10 GPIO_PIN_DATA(1, 10) /*!< Specify PB.10 Pin Data Input/Output \hideinitializer */
|
|
#define PB11 GPIO_PIN_DATA(1, 11) /*!< Specify PB.11 Pin Data Input/Output \hideinitializer */
|
|
#define PB12 GPIO_PIN_DATA(1, 12) /*!< Specify PB.12 Pin Data Input/Output \hideinitializer */
|
|
#define PB13 GPIO_PIN_DATA(1, 13) /*!< Specify PB.13 Pin Data Input/Output \hideinitializer */
|
|
#define PB14 GPIO_PIN_DATA(1, 14) /*!< Specify PB.14 Pin Data Input/Output \hideinitializer */
|
|
#define PB15 GPIO_PIN_DATA(1, 15) /*!< Specify PB.15 Pin Data Input/Output \hideinitializer */
|
|
#define PC0 GPIO_PIN_DATA(2, 0 ) /*!< Specify PC.0 Pin Data Input/Output \hideinitializer */
|
|
#define PC1 GPIO_PIN_DATA(2, 1 ) /*!< Specify PC.1 Pin Data Input/Output \hideinitializer */
|
|
#define PC2 GPIO_PIN_DATA(2, 2 ) /*!< Specify PC.2 Pin Data Input/Output \hideinitializer */
|
|
#define PC3 GPIO_PIN_DATA(2, 3 ) /*!< Specify PC.3 Pin Data Input/Output \hideinitializer */
|
|
#define PC4 GPIO_PIN_DATA(2, 4 ) /*!< Specify PC.4 Pin Data Input/Output \hideinitializer */
|
|
#define PC5 GPIO_PIN_DATA(2, 5 ) /*!< Specify PC.5 Pin Data Input/Output \hideinitializer */
|
|
#define PC6 GPIO_PIN_DATA(2, 6 ) /*!< Specify PC.6 Pin Data Input/Output \hideinitializer */
|
|
#define PC7 GPIO_PIN_DATA(2, 7 ) /*!< Specify PC.7 Pin Data Input/Output \hideinitializer */
|
|
#define PC8 GPIO_PIN_DATA(2, 8 ) /*!< Specify PC.8 Pin Data Input/Output \hideinitializer */
|
|
#define PC9 GPIO_PIN_DATA(2, 9 ) /*!< Specify PC.9 Pin Data Input/Output \hideinitializer */
|
|
#define PC10 GPIO_PIN_DATA(2, 10) /*!< Specify PC.10 Pin Data Input/Output \hideinitializer */
|
|
#define PC11 GPIO_PIN_DATA(2, 11) /*!< Specify PC.11 Pin Data Input/Output \hideinitializer */
|
|
#define PC12 GPIO_PIN_DATA(2, 12) /*!< Specify PC.12 Pin Data Input/Output \hideinitializer */
|
|
#define PC13 GPIO_PIN_DATA(2, 13) /*!< Specify PC.13 Pin Data Input/Output \hideinitializer */
|
|
#define PC14 GPIO_PIN_DATA(2, 14) /*!< Specify PC.14 Pin Data Input/Output \hideinitializer */
|
|
#define PD0 GPIO_PIN_DATA(3, 0 ) /*!< Specify PD.0 Pin Data Input/Output \hideinitializer */
|
|
#define PD1 GPIO_PIN_DATA(3, 1 ) /*!< Specify PD.1 Pin Data Input/Output \hideinitializer */
|
|
#define PD2 GPIO_PIN_DATA(3, 2 ) /*!< Specify PD.2 Pin Data Input/Output \hideinitializer */
|
|
#define PD3 GPIO_PIN_DATA(3, 3 ) /*!< Specify PD.3 Pin Data Input/Output \hideinitializer */
|
|
#define PD4 GPIO_PIN_DATA(3, 4 ) /*!< Specify PD.4 Pin Data Input/Output \hideinitializer */
|
|
#define PD5 GPIO_PIN_DATA(3, 5 ) /*!< Specify PD.5 Pin Data Input/Output \hideinitializer */
|
|
#define PD6 GPIO_PIN_DATA(3, 6 ) /*!< Specify PD.6 Pin Data Input/Output \hideinitializer */
|
|
#define PD7 GPIO_PIN_DATA(3, 7 ) /*!< Specify PD.7 Pin Data Input/Output \hideinitializer */
|
|
#define PD8 GPIO_PIN_DATA(3, 8 ) /*!< Specify PD.8 Pin Data Input/Output \hideinitializer */
|
|
#define PD9 GPIO_PIN_DATA(3, 9 ) /*!< Specify PD.9 Pin Data Input/Output \hideinitializer */
|
|
#define PD10 GPIO_PIN_DATA(3, 10) /*!< Specify PD.10 Pin Data Input/Output \hideinitializer */
|
|
#define PD11 GPIO_PIN_DATA(3, 11) /*!< Specify PD.11 Pin Data Input/Output \hideinitializer */
|
|
#define PD12 GPIO_PIN_DATA(3, 12) /*!< Specify PD.12 Pin Data Input/Output \hideinitializer */
|
|
#define PD13 GPIO_PIN_DATA(3, 13) /*!< Specify PD.13 Pin Data Input/Output \hideinitializer */
|
|
#define PD14 GPIO_PIN_DATA(3, 14) /*!< Specify PD.14 Pin Data Input/Output \hideinitializer */
|
|
#define PE0 GPIO_PIN_DATA(4, 0 ) /*!< Specify PE.0 Pin Data Input/Output \hideinitializer */
|
|
#define PE1 GPIO_PIN_DATA(4, 1 ) /*!< Specify PE.1 Pin Data Input/Output \hideinitializer */
|
|
#define PE2 GPIO_PIN_DATA(4, 2 ) /*!< Specify PE.2 Pin Data Input/Output \hideinitializer */
|
|
#define PE3 GPIO_PIN_DATA(4, 3 ) /*!< Specify PE.3 Pin Data Input/Output \hideinitializer */
|
|
#define PE4 GPIO_PIN_DATA(4, 4 ) /*!< Specify PE.4 Pin Data Input/Output \hideinitializer */
|
|
#define PE5 GPIO_PIN_DATA(4, 5 ) /*!< Specify PE.5 Pin Data Input/Output \hideinitializer */
|
|
#define PE6 GPIO_PIN_DATA(4, 6 ) /*!< Specify PE.6 Pin Data Input/Output \hideinitializer */
|
|
#define PE7 GPIO_PIN_DATA(4, 7 ) /*!< Specify PE.7 Pin Data Input/Output \hideinitializer */
|
|
#define PE8 GPIO_PIN_DATA(4, 8 ) /*!< Specify PE.8 Pin Data Input/Output \hideinitializer */
|
|
#define PE9 GPIO_PIN_DATA(4, 9 ) /*!< Specify PE.9 Pin Data Input/Output \hideinitializer */
|
|
#define PE10 GPIO_PIN_DATA(4, 10) /*!< Specify PE.10 Pin Data Input/Output \hideinitializer */
|
|
#define PE11 GPIO_PIN_DATA(4, 11) /*!< Specify PE.11 Pin Data Input/Output \hideinitializer */
|
|
#define PE12 GPIO_PIN_DATA(4, 12) /*!< Specify PE.12 Pin Data Input/Output \hideinitializer */
|
|
#define PE13 GPIO_PIN_DATA(4, 13) /*!< Specify PE.13 Pin Data Input/Output \hideinitializer */
|
|
#define PE14 GPIO_PIN_DATA(4, 14) /*!< Specify PE.14 Pin Data Input/Output \hideinitializer */
|
|
#define PE15 GPIO_PIN_DATA(4, 15) /*!< Specify PE.15 Pin Data Input/Output \hideinitializer */
|
|
#define PF0 GPIO_PIN_DATA(5, 0 ) /*!< Specify PF.0 Pin Data Input/Output \hideinitializer */
|
|
#define PF1 GPIO_PIN_DATA(5, 1 ) /*!< Specify PF.1 Pin Data Input/Output \hideinitializer */
|
|
#define PF2 GPIO_PIN_DATA(5, 2 ) /*!< Specify PF.2 Pin Data Input/Output \hideinitializer */
|
|
#define PF3 GPIO_PIN_DATA(5, 3 ) /*!< Specify PF.3 Pin Data Input/Output \hideinitializer */
|
|
#define PF4 GPIO_PIN_DATA(5, 4 ) /*!< Specify PF.4 Pin Data Input/Output \hideinitializer */
|
|
#define PF5 GPIO_PIN_DATA(5, 5 ) /*!< Specify PF.5 Pin Data Input/Output \hideinitializer */
|
|
#define PF6 GPIO_PIN_DATA(5, 6 ) /*!< Specify PF.6 Pin Data Input/Output \hideinitializer */
|
|
#define PF7 GPIO_PIN_DATA(5, 7 ) /*!< Specify PF.7 Pin Data Input/Output \hideinitializer */
|
|
#define PF8 GPIO_PIN_DATA(5, 8 ) /*!< Specify PF.8 Pin Data Input/Output \hideinitializer */
|
|
#define PF9 GPIO_PIN_DATA(5, 9 ) /*!< Specify PF.9 Pin Data Input/Output \hideinitializer */
|
|
#define PF10 GPIO_PIN_DATA(5, 10) /*!< Specify PF.10 Pin Data Input/Output \hideinitializer */
|
|
#define PF11 GPIO_PIN_DATA(5, 11) /*!< Specify PF.11 Pin Data Input/Output \hideinitializer */
|
|
#define PG0 GPIO_PIN_DATA(6, 0 ) /*!< Specify PG.0 Pin Data Input/Output \hideinitializer */
|
|
#define PG1 GPIO_PIN_DATA(6, 1 ) /*!< Specify PG.1 Pin Data Input/Output \hideinitializer */
|
|
#define PG2 GPIO_PIN_DATA(6, 2 ) /*!< Specify PG.2 Pin Data Input/Output \hideinitializer */
|
|
#define PG3 GPIO_PIN_DATA(6, 3 ) /*!< Specify PG.3 Pin Data Input/Output \hideinitializer */
|
|
#define PG4 GPIO_PIN_DATA(6, 4 ) /*!< Specify PG.4 Pin Data Input/Output \hideinitializer */
|
|
#define PG5 GPIO_PIN_DATA(6, 5 ) /*!< Specify PG.5 Pin Data Input/Output \hideinitializer */
|
|
#define PG6 GPIO_PIN_DATA(6, 6 ) /*!< Specify PG.6 Pin Data Input/Output \hideinitializer */
|
|
#define PG7 GPIO_PIN_DATA(6, 7 ) /*!< Specify PG.7 Pin Data Input/Output \hideinitializer */
|
|
#define PG8 GPIO_PIN_DATA(6, 8 ) /*!< Specify PG.8 Pin Data Input/Output \hideinitializer */
|
|
#define PG9 GPIO_PIN_DATA(6, 9 ) /*!< Specify PG.9 Pin Data Input/Output \hideinitializer */
|
|
#define PG10 GPIO_PIN_DATA(6, 10) /*!< Specify PG.10 Pin Data Input/Output \hideinitializer */
|
|
#define PG11 GPIO_PIN_DATA(6, 11) /*!< Specify PG.11 Pin Data Input/Output \hideinitializer */
|
|
#define PG12 GPIO_PIN_DATA(6, 12) /*!< Specify PG.12 Pin Data Input/Output \hideinitializer */
|
|
#define PG13 GPIO_PIN_DATA(6, 13) /*!< Specify PG.13 Pin Data Input/Output \hideinitializer */
|
|
#define PG14 GPIO_PIN_DATA(6, 14) /*!< Specify PG.14 Pin Data Input/Output \hideinitializer */
|
|
#define PG15 GPIO_PIN_DATA(6, 15) /*!< Specify PG.15 Pin Data Input/Output \hideinitializer */
|
|
#define PH0 GPIO_PIN_DATA(7, 0 ) /*!< Specify PH.0 Pin Data Input/Output \hideinitializer */
|
|
#define PH1 GPIO_PIN_DATA(7, 1 ) /*!< Specify PH.1 Pin Data Input/Output \hideinitializer */
|
|
#define PH2 GPIO_PIN_DATA(7, 2 ) /*!< Specify PH.2 Pin Data Input/Output \hideinitializer */
|
|
#define PH3 GPIO_PIN_DATA(7, 3 ) /*!< Specify PH.3 Pin Data Input/Output \hideinitializer */
|
|
#define PH4 GPIO_PIN_DATA(7, 4 ) /*!< Specify PH.4 Pin Data Input/Output \hideinitializer */
|
|
#define PH5 GPIO_PIN_DATA(7, 5 ) /*!< Specify PH.5 Pin Data Input/Output \hideinitializer */
|
|
#define PH6 GPIO_PIN_DATA(7, 6 ) /*!< Specify PH.6 Pin Data Input/Output \hideinitializer */
|
|
#define PH7 GPIO_PIN_DATA(7, 7 ) /*!< Specify PH.7 Pin Data Input/Output \hideinitializer */
|
|
#define PH8 GPIO_PIN_DATA(7, 8 ) /*!< Specify PH.8 Pin Data Input/Output \hideinitializer */
|
|
#define PH9 GPIO_PIN_DATA(7, 9 ) /*!< Specify PH.9 Pin Data Input/Output \hideinitializer */
|
|
#define PH10 GPIO_PIN_DATA(7, 10) /*!< Specify PH.10 Pin Data Input/Output \hideinitializer */
|
|
#define PH11 GPIO_PIN_DATA(7, 11) /*!< Specify PH.11 Pin Data Input/Output \hideinitializer */
|
|
#define PH12 GPIO_PIN_DATA(7, 12) /*!< Specify PH.12 Pin Data Input/Output \hideinitializer */
|
|
#define PH13 GPIO_PIN_DATA(7, 13) /*!< Specify PH.13 Pin Data Input/Output \hideinitializer */
|
|
#define PH14 GPIO_PIN_DATA(7, 14) /*!< Specify PH.14 Pin Data Input/Output \hideinitializer */
|
|
#define PH15 GPIO_PIN_DATA(7, 15) /*!< Specify PH.15 Pin Data Input/Output \hideinitializer */
|
|
#define PI6 GPIO_PIN_DATA(8, 6 ) /*!< Specify PI.6 Pin Data Input/Output \hideinitializer */
|
|
#define PI7 GPIO_PIN_DATA(8, 7 ) /*!< Specify PI.7 Pin Data Input/Output \hideinitializer */
|
|
#define PI8 GPIO_PIN_DATA(8, 8 ) /*!< Specify PI.8 Pin Data Input/Output \hideinitializer */
|
|
#define PI9 GPIO_PIN_DATA(8, 9 ) /*!< Specify PI.9 Pin Data Input/Output \hideinitializer */
|
|
#define PI10 GPIO_PIN_DATA(8, 10) /*!< Specify PI.10 Pin Data Input/Output \hideinitializer */
|
|
#define PI11 GPIO_PIN_DATA(8, 11) /*!< Specify PI.11 Pin Data Input/Output \hideinitializer */
|
|
#define PI12 GPIO_PIN_DATA(8, 12) /*!< Specify PI.12 Pin Data Input/Output \hideinitializer */
|
|
#define PI13 GPIO_PIN_DATA(8, 13) /*!< Specify PI.13 Pin Data Input/Output \hideinitializer */
|
|
#define PI14 GPIO_PIN_DATA(8, 14) /*!< Specify PI.14 Pin Data Input/Output \hideinitializer */
|
|
#define PI15 GPIO_PIN_DATA(8, 15) /*!< Specify PI.15 Pin Data Input/Output \hideinitializer */
|
|
#define PJ0 GPIO_PIN_DATA(9, 0 ) /*!< Specify PJ.0 Pin Data Input/Output \hideinitializer */
|
|
#define PJ1 GPIO_PIN_DATA(9, 1 ) /*!< Specify PJ.1 Pin Data Input/Output \hideinitializer */
|
|
#define PJ2 GPIO_PIN_DATA(9, 2 ) /*!< Specify PJ.2 Pin Data Input/Output \hideinitializer */
|
|
#define PJ3 GPIO_PIN_DATA(9, 3 ) /*!< Specify PJ.3 Pin Data Input/Output \hideinitializer */
|
|
#define PJ4 GPIO_PIN_DATA(9, 4 ) /*!< Specify PJ.4 Pin Data Input/Output \hideinitializer */
|
|
#define PJ5 GPIO_PIN_DATA(9, 5 ) /*!< Specify PJ.5 Pin Data Input/Output \hideinitializer */
|
|
#define PJ6 GPIO_PIN_DATA(9, 6 ) /*!< Specify PJ.6 Pin Data Input/Output \hideinitializer */
|
|
#define PJ7 GPIO_PIN_DATA(9, 7 ) /*!< Specify PJ.7 Pin Data Input/Output \hideinitializer */
|
|
#define PJ8 GPIO_PIN_DATA(9, 8 ) /*!< Specify PJ.8 Pin Data Input/Output \hideinitializer */
|
|
#define PJ9 GPIO_PIN_DATA(9, 9 ) /*!< Specify PJ.9 Pin Data Input/Output \hideinitializer */
|
|
#define PJ10 GPIO_PIN_DATA(9, 10) /*!< Specify PJ.10 Pin Data Input/Output \hideinitializer */
|
|
#define PJ11 GPIO_PIN_DATA(9, 11) /*!< Specify PJ.11 Pin Data Input/Output \hideinitializer */
|
|
#define PJ12 GPIO_PIN_DATA(9, 12) /*!< Specify PJ.12 Pin Data Input/Output \hideinitializer */
|
|
#define PJ13 GPIO_PIN_DATA(9, 13) /*!< Specify PJ.13 Pin Data Input/Output \hideinitializer */
|
|
|
|
/*@}*/ /* end of group GPIO_EXPORTED_CONSTANTS */
|
|
|
|
|
|
/** @addtogroup GPIO_EXPORTED_FUNCTIONS GPIO Exported Functions
|
|
@{
|
|
*/
|
|
|
|
/**
|
|
* @brief Clear GPIO Pin Interrupt Flag
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32PinMask The single or multiple pins of specified GPIO port. \n
|
|
* It could be BIT0 ~ BIT15 for PA, PB, PE, PG and PH GPIO port. \n
|
|
* It could be BIT0 ~ BIT14 for PC and PD GPIO port. \n
|
|
* It could be BIT0 ~ BIT11 for PF GPIO port. \n
|
|
* It could be BIT6 ~ BIT15 for PI GPIO port. \n
|
|
* It could be BIT0 ~ BIT13 for PJ GPIO port.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details Clear the interrupt status of specified GPIO pin.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_CLR_INT_FLAG(port, u32PinMask) ((port)->INTSRC = (u32PinMask))
|
|
|
|
/**
|
|
* @brief Disable Pin De-bounce Function
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32PinMask The single or multiple pins of specified GPIO port. \n
|
|
* It could be BIT0 ~ BIT15 for PA, PB, PE, PG and PH GPIO port. \n
|
|
* It could be BIT0 ~ BIT14 for PC and PD GPIO port. \n
|
|
* It could be BIT0 ~ BIT11 for PF GPIO port. \n
|
|
* It could be BIT6 ~ BIT15 for PI GPIO port. \n
|
|
* It could be BIT0 ~ BIT13 for PJ GPIO port.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details Disable the interrupt de-bounce function of specified GPIO pin.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_DISABLE_DEBOUNCE(port, u32PinMask) ((port)->DBEN &= ~(u32PinMask))
|
|
|
|
/**
|
|
* @brief Enable Pin De-bounce Function
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32PinMask The single or multiple pins of specified GPIO port. \n
|
|
* It could be BIT0 ~ BIT15 for PA, PB, PE, PG and PH GPIO port. \n
|
|
* It could be BIT0 ~ BIT14 for PC and PD GPIO port. \n
|
|
* It could be BIT0 ~ BIT11 for PF GPIO port. \n
|
|
* It could be BIT6 ~ BIT15 for PI GPIO port. \n
|
|
* It could be BIT0 ~ BIT13 for PJ GPIO port.
|
|
* @return None
|
|
*
|
|
* @details Enable the interrupt de-bounce function of specified GPIO pin.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_ENABLE_DEBOUNCE(port, u32PinMask) ((port)->DBEN |= (u32PinMask))
|
|
|
|
/**
|
|
* @brief Disable I/O Digital Input Path
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32PinMask The single or multiple pins of specified GPIO port. \n
|
|
* It could be BIT0 ~ BIT15 for PA, PB, PE, PG and PH GPIO port. \n
|
|
* It could be BIT0 ~ BIT14 for PC and PD GPIO port. \n
|
|
* It could be BIT0 ~ BIT11 for PF GPIO port. \n
|
|
* It could be BIT6 ~ BIT15 for PI GPIO port. \n
|
|
* It could be BIT0 ~ BIT13 for PJ GPIO port.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details Disable I/O digital input path of specified GPIO pin.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_DISABLE_DIGITAL_PATH(port, u32PinMask) ((port)->DINOFF |= ((u32PinMask)<<16))
|
|
|
|
/**
|
|
* @brief Enable I/O Digital Input Path
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32PinMask The single or multiple pins of specified GPIO port. \n
|
|
* It could be BIT0 ~ BIT15 for PA, PB, PE, PG and PH GPIO port. \n
|
|
* It could be BIT0 ~ BIT14 for PC and PD GPIO port. \n
|
|
* It could be BIT0 ~ BIT11 for PF GPIO port. \n
|
|
* It could be BIT6 ~ BIT15 for PI GPIO port. \n
|
|
* It could be BIT0 ~ BIT13 for PJ GPIO port.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details Enable I/O digital input path of specified GPIO pin.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_ENABLE_DIGITAL_PATH(port, u32PinMask) ((port)->DINOFF &= ~((u32PinMask)<<16))
|
|
|
|
/**
|
|
* @brief Disable I/O DOUT mask
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32PinMask The single or multiple pins of specified GPIO port. \n
|
|
* It could be BIT0 ~ BIT15 for PA, PB, PE, PG and PH GPIO port. \n
|
|
* It could be BIT0 ~ BIT14 for PC and PD GPIO port. \n
|
|
* It could be BIT0 ~ BIT11 for PF GPIO port. \n
|
|
* It could be BIT6 ~ BIT15 for PI GPIO port. \n
|
|
* It could be BIT0 ~ BIT13 for PJ GPIO port.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details Disable I/O DOUT mask of specified GPIO pin.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_DISABLE_DOUT_MASK(port, u32PinMask) ((port)->DATMSK &= ~(u32PinMask))
|
|
|
|
/**
|
|
* @brief Enable I/O DOUT mask
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32PinMask The single or multiple pins of specified GPIO port. \n
|
|
* It could be BIT0 ~ BIT15 for PA, PB, PE, PG and PH GPIO port. \n
|
|
* It could be BIT0 ~ BIT14 for PC and PD GPIO port. \n
|
|
* It could be BIT0 ~ BIT11 for PF GPIO port. \n
|
|
* It could be BIT6 ~ BIT15 for PI GPIO port. \n
|
|
* It could be BIT0 ~ BIT13 for PJ GPIO port.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details Enable I/O DOUT mask of specified GPIO pin.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_ENABLE_DOUT_MASK(port, u32PinMask) ((port)->DATMSK |= (u32PinMask))
|
|
|
|
/**
|
|
* @brief Get GPIO Pin Interrupt Flag
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32PinMask The single or multiple pins of specified GPIO port. \n
|
|
* It could be BIT0 ~ BIT15 for PA, PB, PE, PG and PH GPIO port. \n
|
|
* It could be BIT0 ~ BIT14 for PC and PD GPIO port. \n
|
|
* It could be BIT0 ~ BIT11 for PF GPIO port. \n
|
|
* It could be BIT6 ~ BIT15 for PI GPIO port. \n
|
|
* It could be BIT0 ~ BIT13 for PJ GPIO port.
|
|
*
|
|
* @retval 0 No interrupt at specified GPIO pin
|
|
* @retval 1 The specified GPIO pin generate an interrupt
|
|
*
|
|
* @details Get the interrupt status of specified GPIO pin.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_GET_INT_FLAG(port, u32PinMask) ((port)->INTSRC & (u32PinMask))
|
|
|
|
/**
|
|
* @brief Set De-bounce Sampling Cycle Time
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32ClkSrc The de-bounce counter clock source. It could be
|
|
* - \ref GPIO_DBCTL_DBCLKSRC_HCLK
|
|
* - \ref GPIO_DBCTL_DBCLKSRC_LIRC.
|
|
* @param[in] u32ClkSel The de-bounce sampling cycle selection. It could be
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_1
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_2
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_4
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_8
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_16
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_32
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_64
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_128
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_256
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_512
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_1024
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_2048
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_4096
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_8192
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_16384
|
|
* - \ref GPIO_DBCTL_DBCLKSEL_32768
|
|
*
|
|
* @return None
|
|
*
|
|
* @details Set the interrupt de-bounce sampling cycle time based on the debounce counter clock source. \n
|
|
* Example: GPIO_SET_DEBOUNCE_TIME(PA, GPIO_DBCTL_DBCLKSRC_LIRC, GPIO_DBCTL_DBCLKSEL_4). \n
|
|
* It's meaning the De-debounce counter clock source is internal 10 KHz and sampling cycle selection is 4. \n
|
|
* Then the target de-bounce sampling cycle time is (4)*(1/(10*1000)) s = 4*0.0001 s = 400 us,
|
|
* and system will sampling interrupt input once per 400 us.
|
|
*/
|
|
#define GPIO_SET_DEBOUNCE_TIME(port, u32ClkSrc, u32ClkSel) ((port)->DBCTL = (GPIO_DBCTL_ICLKON_Msk | (u32ClkSrc) | (u32ClkSel)))
|
|
|
|
/**
|
|
* @brief Set GPIO Interrupt Clock on bit
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @return None
|
|
* @details Set the I/O pins edge detection circuit always active after reset for specified port.
|
|
*/
|
|
#define GPIO_SET_DEBOUNCE_ICLKON(port) ((port)->DBCTL |= GPIO_DBCTL_ICLKON_Msk)
|
|
|
|
/**
|
|
* @brief Clear GPIO Interrupt Clock on bit
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @return None
|
|
* @details Set edge detection circuit active only if I/O pin edge interrupt enabled for specified port.
|
|
*/
|
|
#define GPIO_CLR_DEBOUNCE_ICLKON(port) ((port)->DBCTL &= ~(GPIO_DBCTL_ICLKON_Msk))
|
|
|
|
/**
|
|
* @brief Get GPIO Port IN Data
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
*
|
|
* @return The specified port data
|
|
*
|
|
* @details Get the PIN register of specified GPIO port.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_GET_IN_DATA(port) ((port)->PIN)
|
|
|
|
/**
|
|
* @brief Set GPIO Port OUT Data
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32Data GPIO port data.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details Set the Data into specified GPIO port.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_SET_OUT_DATA(port, u32Data) ((port)->DOUT = (u32Data))
|
|
|
|
/**
|
|
* @brief Toggle Specified GPIO pin
|
|
*
|
|
* @param[in] u32Pin Pxy
|
|
*
|
|
* @return None
|
|
*
|
|
* @details Toggle the specified GPIO pint.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_TOGGLE(u32Pin) ((u32Pin) ^= 1)
|
|
|
|
|
|
/**
|
|
* @brief Enable External GPIO interrupt
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32Pin The pin of specified GPIO port. \n
|
|
* It could be 0 ~ 15 for PA, PB, PE, PG and PH GPIO port. \n
|
|
* It could be 0 ~ 14 for PC and PD GPIO port. \n
|
|
* It could be 0 ~ 11 for PF GPIO port. \n
|
|
* It could be 6 ~ 15 for PI GPIO port. \n
|
|
* It could be 0 ~ 13 for PJ GPIO port.
|
|
* @param[in] u32IntAttribs The interrupt attribute of specified GPIO pin. It could be \n
|
|
* - \ref GPIO_INT_RISING
|
|
* - \ref GPIO_INT_FALLING
|
|
* - \ref GPIO_INT_BOTH_EDGE
|
|
* - \ref GPIO_INT_HIGH
|
|
* - \ref GPIO_INT_LOW
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to enable specified GPIO pin interrupt.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_EnableEINT GPIO_EnableInt
|
|
|
|
/**
|
|
* @brief Disable External GPIO interrupt
|
|
*
|
|
* @param[in] port GPIO port. It could be \ref PA, \ref PB, \ref PC, \ref PD, \ref PE, \ref PF, \ref PG, \ref PH, \ref PI or \ref PJ.
|
|
* @param[in] u32Pin The pin of specified GPIO port. \n
|
|
* It could be 0 ~ 15 for PA, PB, PE, PG and PH GPIO port. \n
|
|
* It could be 0 ~ 14 for PC and PD GPIO port. \n
|
|
* It could be 0 ~ 11 for PF GPIO port. \n
|
|
* It could be 6 ~ 15 for PI GPIO port. \n
|
|
* It could be 0 ~ 13 for PJ GPIO port.
|
|
*
|
|
* @return None
|
|
*
|
|
* @details This function is used to disable specified GPIO pin interrupt.
|
|
* \hideinitializer
|
|
*/
|
|
#define GPIO_DisableEINT GPIO_DisableInt
|
|
|
|
|
|
void GPIO_SetMode(GPIO_T *port, uint32_t u32PinMask, uint32_t u32Mode);
|
|
void GPIO_EnableInt(GPIO_T *port, uint32_t u32Pin, uint32_t u32IntAttribs);
|
|
void GPIO_DisableInt(GPIO_T *port, uint32_t u32Pin);
|
|
void GPIO_SetSlewCtl(GPIO_T *port, uint32_t u32PinMask, uint32_t u32Mode);
|
|
void GPIO_SetPullCtl(GPIO_T *port, uint32_t u32PinMask, uint32_t u32Mode);
|
|
|
|
|
|
/*@}*/ /* end of group GPIO_EXPORTED_FUNCTIONS */
|
|
|
|
/*@}*/ /* end of group GPIO_Driver */
|
|
|
|
/*@}*/ /* end of group Standard_Driver */
|
|
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __NU_GPIO_H__ */
|