libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/frdm-k64f/board/drv_emac.h

314 lines
10 KiB
C
Raw Blame History

/*
* COPYRIGHT (C) 2018, Real-Thread Information Technology Ltd
*
* SPDX-License-Identifier: Apache-2.0
* Change Logs:
* Date Author Notes
* 2015-07-15 Bernard The first version
*/
#ifndef EMAC_DRV_H__
#define EMAC_DRV_H__
//#define ENHANCED_BD
///* Ethernet standard lengths in bytes*/
//#define ETH_ADDR_LEN (6)
//#define ETH_TYPE_LEN (2)
//#define ETH_CRC_LEN (4)
//#define ETH_MAX_DATA (1500)
//#define ETH_MIN_DATA (46)
//#define ETH_HDR_LEN (ETH_ADDR_LEN * 2 + ETH_TYPE_LEN)
//// 6 * 2 + 2 + 1500 + 4
///* Maximum and Minimum Ethernet Frame Sizes */
//#define ETH_MAX_FRM (ETH_HDR_LEN + ETH_MAX_DATA + ETH_CRC_LEN)
//#define ETH_MIN_FRM (ETH_HDR_LEN + ETH_MIN_DATA + ETH_CRC_LEN)
//#define ETH_MTU (ETH_HDR_LEN + ETH_MAX_DATA)
///********INTERFACE**********/
//typedef enum
//{
// MAC_MII,
// MAC_RMII,
//} ENET_INTERFACE;
///********AUTONEG**********/
//typedef enum
//{
// AUTONEG_ON,
// AUTONEG_OFF
//} ENET_AUTONEG;
///********SPEED**********/
//typedef enum
//{
// MII_10BASET,
// MII_100BASET
//} ENET_SPEED;
///********DUPLEX**********/
///* MII Duplex Settings */
//typedef enum
//{
// MII_HDX, /*!< half-duplex */
// MII_FDX /*!< full-duplex */
//} ENET_DUPLEX;
///********LOOPBACK**********/
//typedef enum
//{
// INTERNAL_LOOPBACK,
// EXTERNAL_LOOPBACK,
// NO_LOOPBACK
//} ENET_LOOPBACK;
///********EXTERNAL**********/
//typedef enum
//{
// EXTERNAL_NONE,
// EXTERNAL_YES
//} ENET_EXTERNAL_CONN;
///*
// * FEC Configuration Parameters
// */
//typedef struct
//{
// //ENET_Type* hw_base; /* FEC channel */
// ENET_INTERFACE interface; /* Transceiver mode */
// ENET_AUTONEG neg; /* FEC autoneg */
// ENET_SPEED speed; /* Ethernet Speed */
// ENET_DUPLEX duplex; /* Ethernet Duplex */
// ENET_LOOPBACK loopback; /* Loopback Mode */
// ENET_EXTERNAL_CONN external; /* outside test? */
// uint8_t prom; /* Promiscuous Mode? */
// uint8_t mac[6]; /* Ethernet Address */
//} ENET_CONFIG;
//// Choose Enhanced Buffer Descriptor or Legacy
////#define ENHANCED_BD
//// Buffer sizes in bytes (must be divisible by 16)
//#define RX_BUFFER_SIZE ETH_MAX_FRM
//#define TX_BUFFER_SIZE ETH_MAX_FRM
//// Number of Receive and Transmit Buffers and Buffer Descriptors
//#define NUM_RXBDS 8
//#define NUM_TXBDS 4
//// Buffer Descriptor Format
//typedef struct
//{
// uint16_t status; /* control and status */
// uint16_t length; /* transfer length */
// uint8_t *data; /* buffer address */
//#ifdef ENHANCED_BD
// uint32_t ebd_status;
// uint16_t length_proto_type;
// uint16_t payload_checksum;
// uint32_t bdu;
// uint32_t timestamp;
// uint32_t reserverd_word1;
// uint32_t reserverd_word2;
//#endif /* ENHANCED_BD */
//} NBUF;
//// ----------------------------------------------------------------------
//// TX Buffer Descriptor Bit Definitions
//// ----------------------------------------------------------------------
//#define TX_BD_R 0x0080
//#define TX_BD_TO1 0x0040
//#define TX_BD_W 0x0020
//#define TX_BD_TO2 0x0010
//#define TX_BD_L 0x0008
//#define TX_BD_TC 0x0004
//#define TX_BD_ABC 0x0002
//// ----------------------------------------------------------------------
//// TX Enhanced BD Bit Definitions
//// ----------------------------------------------------------------------
//#define TX_BD_INT 0x00000040
//#define TX_BD_TS 0x00000020
//#define TX_BD_PINS 0x00000010
//#define TX_BD_IINS 0x00000008
//#define TX_BD_TXE 0x00800000
//#define TX_BD_UE 0x00200000
//#define TX_BD_EE 0x00100000
//#define TX_BD_FE 0x00080000
//#define TX_BD_LCE 0x00040000
//#define TX_BD_OE 0x00020000
//#define TX_BD_TSE 0x00010000
//#define TX_BD_BDU 0x00000080
//// ----------------------------------------------------------------------
//// RX Buffer Descriptor Bit Definitions
//// ----------------------------------------------------------------------
//// Offset 0 flags - status: Big Endian
//#define RX_BD_E 0x0080
//#define RX_BD_R01 0x0040
//#define RX_BD_W 0x0020
//#define RX_BD_R02 0x0010
//#define RX_BD_L 0x0008
//#define RX_BD_M 0x0001
//#define RX_BD_BC 0x8000
//#define RX_BD_MC 0x4000
//#define RX_BD_LG 0x2000
//#define RX_BD_NO 0x1000
//#define RX_BD_CR 0x0400
//#define RX_BD_OV 0x0200
//#define RX_BD_TR 0x0100
//// ----------------------------------------------------------------------
//// RX Enhanced BD Bit Definitions
//// ----------------------------------------------------------------------
//#define RX_BD_ME 0x00000080
//#define RX_BD_PE 0x00000004
//#define RX_BD_CE 0x00000002
//#define RX_BD_UC 0x00000001
//#define RX_BD_INT 0x00008000
//#define RX_BD_ICE 0x20000000
//#define RX_BD_PCR 0x10000000
//#define RX_BD_VLAN 0x04000000
//#define RX_BD_IPV6 0x02000000
//#define RX_BD_FRAG 0x01000000
//#define RX_BD_BDU 0x00000080
///* MII Register Addresses */
//#define PHY_BMCR (0x00)
//#define PHY_BMSR (0x01)
//#define PHY_PHYIDR1 (0x02)
//#define PHY_PHYIDR2 (0x03)
//#define PHY_ANAR (0x04)
//#define PHY_ANLPAR (0x05)
//#define PHY_ANLPARNP (0x05)
//#define PHY_ANER (0x06)
//#define PHY_ANNPTR (0x07)
//#define PHY_PHYSTS (0x10)
//#define PHY_MICR (0x11)
//#define PHY_MISR (0x12)
//#define PHY_PAGESEL (0x13)
///*TSI-EVB definition: National Semiconductor*/
//#define PHY_PHYCR2 (0x1C)
///*TWR definition: Micrel*/
//#define PHY_PHYCTRL1 (0x1E)
//#define PHY_PHYCTRL2 (0x1F)
///* Bit definitions and macros for PHY_BMCR */
//#define PHY_BMCR_RESET (0x8000)
//#define PHY_BMCR_LOOP (0x4000)
//#define PHY_BMCR_SPEED (0x2000)
//#define PHY_BMCR_AN_ENABLE (0x1000)
//#define PHY_BMCR_POWERDOWN (0x0800)
//#define PHY_BMCR_ISOLATE (0x0400)
//#define PHY_BMCR_AN_RESTART (0x0200)
//#define PHY_BMCR_FDX (0x0100)
//#define PHY_BMCR_COL_TEST (0x0080)
///* Bit definitions and macros for PHY_BMSR */
//#define PHY_BMSR_100BT4 (0x8000)
//#define PHY_BMSR_100BTX_FDX (0x4000)
//#define PHY_BMSR_100BTX (0x2000)
//#define PHY_BMSR_10BT_FDX (0x1000)
//#define PHY_BMSR_10BT (0x0800)
//#define PHY_BMSR_NO_PREAMBLE (0x0040)
//#define PHY_BMSR_AN_COMPLETE (0x0020)
//#define PHY_BMSR_REMOTE_FAULT (0x0010)
//#define PHY_BMSR_AN_ABILITY (0x0008)
//#define PHY_BMSR_LINK (0x0004)
//#define PHY_BMSR_JABBER (0x0002)
//#define PHY_BMSR_EXTENDED (0x0001)
///* Bit definitions and macros for PHY_ANAR */
//#define PHY_ANAR_NEXT_PAGE (0x8001)
//#define PHY_ANAR_REM_FAULT (0x2001)
//#define PHY_ANAR_PAUSE (0x0401)
//#define PHY_ANAR_100BT4 (0x0201)
//#define PHY_ANAR_100BTX_FDX (0x0101)
//#define PHY_ANAR_100BTX (0x0081)
//#define PHY_ANAR_10BT_FDX (0x0041)
//#define PHY_ANAR_10BT (0x0021)
//#define PHY_ANAR_802_3 (0x0001)
///* Bit definitions and macros for PHY_ANLPAR */
//#define PHY_ANLPAR_NEXT_PAGE (0x8000)
//#define PHY_ANLPAR_ACK (0x4000)
//#define PHY_ANLPAR_REM_FAULT (0x2000)
//#define PHY_ANLPAR_PAUSE (0x0400)
//#define PHY_ANLPAR_100BT4 (0x0200)
//#define PHY_ANLPAR_100BTX_FDX (0x0100)
//#define PHY_ANLPAR_100BTX (0x0080)
//#define PHY_ANLPAR_10BTX_FDX (0x0040)
//#define PHY_ANLPAR_10BT (0x0020)
///* Bit definitions of PHY_PHYSTS: National */
//#define PHY_PHYSTS_MDIXMODE (0x4000)
//#define PHY_PHYSTS_RX_ERR_LATCH (0x2000)
//#define PHY_PHYSTS_POL_STATUS (0x1000)
//#define PHY_PHYSTS_FALSECARRSENSLAT (0x0800)
//#define PHY_PHYSTS_SIGNALDETECT (0x0400)
//#define PHY_PHYSTS_PAGERECEIVED (0x0100)
//#define PHY_PHYSTS_MIIINTERRUPT (0x0080)
//#define PHY_PHYSTS_REMOTEFAULT (0x0040)
//#define PHY_PHYSTS_JABBERDETECT (0x0020)
//#define PHY_PHYSTS_AUTONEGCOMPLETE (0x0010)
//#define PHY_PHYSTS_LOOPBACKSTATUS (0x0008)
//#define PHY_PHYSTS_DUPLEXSTATUS (0x0004)
//#define PHY_PHYSTS_SPEEDSTATUS (0x0002)
//#define PHY_PHYSTS_LINKSTATUS (0x0001)
///* Bit definitions of PHY_PHYCR2 */
//#define PHY_PHYCR2_SYNC_ENET_EN (0x2000)
//#define PHY_PHYCR2_CLK_OUT_RXCLK (0x1000)
//#define PHY_PHYCR2_BC_WRITE (0x0800)
//#define PHY_PHYCR2_PHYTER_COMP (0x0400)
//#define PHY_PHYCR2_SOFT_RESET (0x0200)
//#define PHY_PHYCR2_CLK_OUT_DIS (0x0001)
///* Bit definition and macros for PHY_PHYCTRL1 */
//#define PHY_PHYCTRL1_LED_MASK (0xC000)
//#define PHY_PHYCTRL1_POLARITY (0x2000)
//#define PHY_PHYCTRL1_MDX_STATE (0x0800)
//#define PHY_PHYCTRL1_REMOTE_LOOP (0x0080)
///* Bit definition and macros for PHY_PHYCTRL2 */
//#define PHY_PHYCTRL2_HP_MDIX (0x8000)
//#define PHY_PHYCTRL2_MDIX_SELECT (0x4000)
//#define PHY_PHYCTRL2_PAIRSWAP_DIS (0x2000)
//#define PHY_PHYCTRL2_ENERGY_DET (0x1000)
//#define PHY_PHYCTRL2_FORCE_LINK (0x0800)
//#define PHY_PHYCTRL2_POWER_SAVING (0x0400)
//#define PHY_PHYCTRL2_INT_LEVEL (0x0200)
//#define PHY_PHYCTRL2_EN_JABBER (0x0100)
//#define PHY_PHYCTRL2_AUTONEG_CMPLT (0x0080)
//#define PHY_PHYCTRL2_ENABLE_PAUSE (0x0040)
//#define PHY_PHYCTRL2_PHY_ISOLATE (0x0020)
//#define PHY_PHYCTRL2_OP_MOD_MASK (0x001C)
//#define PHY_PHYCTRL2_EN_SQE_TEST (0x0002)
//#define PHY_PHYCTRL2_DATA_SCRAM_DIS (0x0001)
///* Bit definitions of PHY_PHYCTRL2_OP_MOD_MASK */
//#define PHY_PHYCTRL2_OP_MOD_SHIFT 2
//#define PHY_PHYCTRL2_MODE_OP_MOD_STILL_NEG 0
//#define PHY_PHYCTRL2_MODE_OP_MOD_10MBPS_HD 1
//#define PHY_PHYCTRL2_MODE_OP_MOD_100MBPS_HD 2
//#define PHY_PHYCTRL2_MODE_OP_MOD_10MBPS_FD 5
//#define PHY_PHYCTRL2_MODE_OP_MOD_100MBPS_FD 6
//#define MII_TIMEOUT 0x1FF
//#define MII_LINK_TIMEOUT 0x1FF
//int drv_emac_hw_init(void);
#endif
View Git Blame Copy Permalink