1026 lines
46 KiB
C
1026 lines
46 KiB
C
//*****************************************************************************
|
|
//
|
|
// emac.h - Defines and Macros for the Ethernet module on Snowflake-class
|
|
// devices.
|
|
//
|
|
// Copyright (c) 2012-2014 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 2.1.0.12573 of the Tiva Peripheral Driver Library.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#ifndef __DRIVERLIB_EMAC_H__
|
|
#define __DRIVERLIB_EMAC_H__
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// If building with a C++ compiler, make all of the definitions in this header
|
|
// have a C binding.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \addtogroup emac_api
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The physical address of the internal PHY. This should be in hw_emac.h.
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_PHY_ADDR 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Helper Macros for Ethernet Processing
|
|
//
|
|
//*****************************************************************************
|
|
//
|
|
// htonl/ntohl - Big endian/little endian byte swapping macros for 32-bit
|
|
// values.
|
|
//
|
|
//*****************************************************************************
|
|
#ifndef htonl
|
|
#define htonl(a) \
|
|
((((a) >> 24) & 0x000000ff) | \
|
|
(((a) >> 8) & 0x0000ff00) | \
|
|
(((a) << 8) & 0x00ff0000) | \
|
|
(((a) << 24) & 0xff000000))
|
|
#endif
|
|
|
|
#ifndef ntohl
|
|
#define ntohl(a) htonl((a))
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// htons/ntohs - Big endian/little endian byte swapping macros for 16-bit
|
|
// values.
|
|
//
|
|
//*****************************************************************************
|
|
#ifndef htons
|
|
#define htons(a) \
|
|
((((a) >> 8) & 0x00ff) | \
|
|
(((a) << 8) & 0xff00))
|
|
#endif
|
|
|
|
#ifndef ntohs
|
|
#define ntohs(a) htons((a))
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Forward reference to the Ethernet DMA descriptor structure.
|
|
//
|
|
//*****************************************************************************
|
|
typedef struct tEMACDMADescriptor tEMACDMADescriptor;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! A union used to describe the two overlapping fields forming the third
|
|
//! word of the Ethernet DMA descriptor.
|
|
//
|
|
//*****************************************************************************
|
|
typedef union
|
|
{
|
|
//
|
|
//! When DMA descriptors are used in chained mode, this field is used to
|
|
//! provide a link to the next descriptor.
|
|
//
|
|
tEMACDMADescriptor *pLink;
|
|
|
|
//
|
|
//! When the DMA descriptors are unchained, this field may be used to point
|
|
//! to a second buffer containing data for transmission or providing
|
|
//! storage for a received frame.
|
|
//
|
|
void *pvBuffer2;
|
|
}
|
|
tEMACDES3;
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! A structure defining a single Ethernet DMA buffer descriptor.
|
|
//
|
|
//*****************************************************************************
|
|
struct tEMACDMADescriptor
|
|
{
|
|
//
|
|
//! The first DMA descriptor word contains various control and status bits
|
|
//! depending upon whether the descriptor is in the transmit or receive
|
|
//! queue. Bit 31 is always the ``OWN'' bit which, when set, indicates
|
|
//! that the hardware has control of the descriptor.
|
|
//
|
|
volatile uint32_t ui32CtrlStatus;
|
|
|
|
//
|
|
//! The second descriptor word contains information on the size of the
|
|
//! buffer or buffers attached to the descriptor and various additional
|
|
//! control bits.
|
|
//
|
|
volatile uint32_t ui32Count;
|
|
|
|
//
|
|
//! The third descriptor word contains a pointer to the buffer containing
|
|
//! data to transmit or into which received data should be written. This
|
|
//! pointer must refer to a buffer in internal SRAM. Pointers to flash or
|
|
//! EPI-connected memory may not be used and will result in the MAC
|
|
//! reporting a bus error.
|
|
//
|
|
void *pvBuffer1;
|
|
|
|
//
|
|
//! The fourth descriptor word contains either a pointer to the next
|
|
//! descriptor in the ring or a pointer to a second data buffer. The
|
|
//! meaning of the word is controlled by the ``CHAINED'' control bit which
|
|
//! appears in the first word of the transmit descriptor or the second
|
|
//! word of the receive descriptor.
|
|
//!
|
|
tEMACDES3 DES3;
|
|
|
|
//
|
|
//! The fifth descriptor word is reserved for transmit descriptors but
|
|
//! used to report extended status in a receive descriptor.
|
|
//
|
|
volatile uint32_t ui32ExtRxStatus;
|
|
|
|
//
|
|
//! The sixth descriptor word is reserved for both transmit and receive
|
|
//! descriptors.
|
|
//
|
|
uint32_t ui32Reserved;
|
|
|
|
//
|
|
//! The seventh descriptor word contains the low 32 bits of the 64-bit
|
|
//! timestamp captured for transmitted or received data. The value is set
|
|
//! only when the transmitted or received data contains the end of a
|
|
//! packet. Availability of the timestamp is indicated via a status bit
|
|
//! in the first descriptor word.
|
|
//
|
|
volatile uint32_t ui32IEEE1588TimeLo;
|
|
|
|
//
|
|
//! The eighth descriptor word contains the high 32 bits of the 64-bit
|
|
//! timestamp captured for transmitted or received data.
|
|
//
|
|
volatile uint32_t ui32IEEE1588TimeHi;
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Fields found in the DES0 word of the transmit descriptor (ui32CtrlStatus in
|
|
// tEMACDMADescriptor)
|
|
//
|
|
//*****************************************************************************
|
|
#define DES0_TX_CTRL_OWN 0x80000000
|
|
#define DES0_TX_CTRL_INTERRUPT 0x40000000
|
|
#define DES0_TX_CTRL_LAST_SEG 0x20000000
|
|
#define DES0_TX_CTRL_FIRST_SEG 0x10000000
|
|
|
|
//
|
|
// This value indicates that the MAC should not append a CRC to transmitted
|
|
// packets. If used with DES0_TX_CTRL_REPLACE_CRC, the last 4 bytes of the
|
|
// packet passed to the transmitter are replaced with a newly calculated CRC.
|
|
// If DES0_TX_CTRL_REPLACE_CRC is not specified, it is assumed that packets
|
|
// transmitted have valid CRCs precomputed and included in the frame data.
|
|
//
|
|
// If DES0_TX_CTRL_DISABLE_CRC is not specified, the MAC will calculate the
|
|
// CRC for all frames transmitted and append this value as the 4-byte FCS
|
|
// after the last data byte in the frame.
|
|
//
|
|
#define DES0_TX_CTRL_DISABLE_CRC 0x08000000
|
|
#define DES0_TX_CTRL_DISABLE_PADDING 0x04000000
|
|
#define DES0_TX_CTRL_ENABLE_TS 0x02000000
|
|
|
|
//
|
|
// This value is only valid if used alongside DES0_TX_CTRL_DISABLE_CRC. When
|
|
// specified, the MAC will replace the last 4 bytes of a transmitted frame
|
|
// with a newly calculated CRC.
|
|
//
|
|
#define DES0_TX_CTRL_REPLACE_CRC 0x01000000
|
|
#define DES0_TX_CTRL_CHKSUM_M 0x00C00000
|
|
#define DES0_TX_CTRL_NO_CHKSUM 0x00000000
|
|
#define DES0_TX_CTRL_IP_HDR_CHKSUM 0x00400000
|
|
#define DES0_TX_CTRL_IP_HDR_PAY_CHKSUM 0x00800000
|
|
#define DES0_TX_CTRL_IP_ALL_CKHSUMS 0x00C00000
|
|
#define DES0_TX_CTRL_END_OF_RING 0x00200000
|
|
#define DES0_TX_CTRL_CHAINED 0x00100000
|
|
#define DES0_TX_CTRL_VLAN_M 0x000C0000
|
|
#define DES0_TX_CTRL_VLAN_NONE 0x00000000
|
|
#define DES0_TX_CTRL_VLAN_REMOVE 0x00040000
|
|
#define DES0_TX_CTRL_VLAN_INSERT 0x00080000
|
|
#define DES0_TX_CTRL_VLAN_REPLACE 0x000C0000
|
|
#define DES0_TX_STAT_TS_CAPTURED 0x00020000
|
|
#define DES0_TX_STAT_IPH_ERR 0x00010000
|
|
#define DES0_TX_STAT_ERR 0x00008000
|
|
#define DES0_TX_STAT_JABBER_TO 0x00004000
|
|
#define DES0_TX_STAT_FLUSHED 0x00002000
|
|
#define DES0_TX_STAT_PAYLOAD_ERR 0x00001000
|
|
#define DES0_TX_STAT_CARRIER_LOST 0x00000800
|
|
#define DES0_TX_STAT_NO_CARRIER 0x00000400
|
|
#define DES0_TX_STAT_TX_L_COLLISION 0x00000200
|
|
#define DES0_TX_STAT_E_COLLISION 0x00000100
|
|
#define DES0_TX_STAT_VLAN_FRAME 0x00000080
|
|
#define DES0_TX_STAT_COL_COUNT_M 0x00000078
|
|
#define DES0_TX_STAT_COL_COUNT_S 3
|
|
#define DES0_TX_STAT_E_DEFERRAL 0x00000004
|
|
#define DES0_TX_STAT_UNDERFLOW 0x00000002
|
|
#define DES0_TX_STAT_DEFERRED 0x00000001
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Fields found in the DES1 word of the transmit descriptor (ui32Count in
|
|
// tEMACDMADescriptor)
|
|
//
|
|
//*****************************************************************************
|
|
#define DES1_TX_CTRL_SADDR_MAC1 0x80000000
|
|
#define DES1_TX_CTRL_SADDR_M 0x60000000
|
|
#define DES1_TX_CTRL_SADDR_NONE 0x00000000
|
|
#define DES1_TX_CTRL_SADDR_INSERT 0x20000000
|
|
#define DES1_TX_CTRL_SADDR_REPLACE 0x40000000
|
|
#define DES1_TX_CTRL_BUFF2_SIZE_M 0x1FFF0000
|
|
#define DES1_TX_CTRL_BUFF1_SIZE_M 0x00001FFF
|
|
#define DES1_TX_CTRL_BUFF2_SIZE_S 16
|
|
#define DES1_TX_CTRL_BUFF1_SIZE_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Fields found in the DES0 word of the receive descriptor (ui32CtrlStatus in
|
|
// tEMACDMADescriptor)
|
|
//
|
|
//*****************************************************************************
|
|
#define DES0_RX_CTRL_OWN 0x80000000
|
|
#define DES0_RX_STAT_DEST_ADDR_FAIL 0x40000000
|
|
#define DES0_RX_STAT_FRAME_LENGTH_M 0x3FFF0000
|
|
#define DES0_RX_STAT_FRAME_LENGTH_S 16
|
|
#define DES0_RX_STAT_ERR 0x00008000
|
|
#define DES0_RX_STAT_DESCRIPTOR_ERR 0x00004000
|
|
#define DES0_RX_STAT_SRC_ADDR_FAIL 0x00002000
|
|
#define DES0_RX_STAT_LENGTH_ERR 0x00001000
|
|
#define DES0_RX_STAT_OVERFLOW 0x00000800
|
|
#define DES0_RX_STAT_VLAN_TAG 0x00000400
|
|
#define DES0_RX_STAT_FIRST_DESC 0x00000200
|
|
#define DES0_RX_STAT_LAST_DESC 0x00000100
|
|
#define DES0_RX_STAT_TS_AVAILABLE 0x00000080
|
|
#define DES0_RX_STAT_RX_L_COLLISION 0x00000040
|
|
#define DES0_RX_STAT_FRAME_TYPE 0x00000020
|
|
#define DES0_RX_STAT_WDOG_TIMEOUT 0x00000010
|
|
#define DES0_RX_STAT_RX_ERR 0x00000008
|
|
#define DES0_RX_STAT_DRIBBLE_ERR 0x00000004
|
|
#define DES0_RX_STAT_CRC_ERR 0x00000002
|
|
#define DES0_RX_STAT_MAC_ADDR 0x00000001
|
|
#define DES0_RX_STAT_EXT_AVAILABLE 0x00000001
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Fields found in the DES1 word of the receive descriptor (ui32Count in
|
|
// tEMACDMADescriptor)
|
|
//
|
|
//*****************************************************************************
|
|
#define DES1_RX_CTRL_DISABLE_INT 0x80000000
|
|
#define DES1_RX_CTRL_BUFF2_SIZE_M 0x1FFF0000
|
|
#define DES1_RX_CTRL_BUFF2_SIZE_S 16
|
|
#define DES1_RX_CTRL_END_OF_RING 0x00008000
|
|
#define DES1_RX_CTRL_CHAINED 0x00004000
|
|
#define DES1_RX_CTRL_BUFF1_SIZE_M 0x00001FFF
|
|
#define DES1_RX_CTRL_BUFF1_SIZE_S 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Fields found in the DES4 word of the receive descriptor (ui32ExtRxStatus in
|
|
// tEMACDMADescriptor)
|
|
//
|
|
//*****************************************************************************
|
|
#define DES4_RX_STAT_TS_DROPPED 0x00004000
|
|
#define DES4_RX_STAT_PTP_VERSION2 0x00002000
|
|
#define DES4_RX_STAT_PTP_TYPE_ETH 0x00001000
|
|
#define DES4_RX_STAT_PTP_TYPE_UDP 0x00000000
|
|
#define DES4_RX_STAT_PTP_MT_M 0x00000F00
|
|
#define DES4_RX_STAT_PTP_MT_NONE 0x00000000
|
|
#define DES4_RX_STAT_PTP_MT_SYNC 0x00000100
|
|
#define DES4_RX_STAT_PTP_MT_FOLLOW_UP 0x00000200
|
|
#define DES4_RX_STAT_PTP_MT_DELAY_REQ 0x00000300
|
|
#define DES4_RX_STAT_PTP_MT_DELAY_RESP 0x00000400
|
|
#define DES4_RX_STAT_PTP_MT_PDELAY_REQ 0x00000500
|
|
#define DES4_RX_STAT_PTP_MT_PDELAY_RESP 0x00000600
|
|
#define DES4_RX_STAT_PTP_MT_PDELAY_RFU 0x00000700
|
|
#define DES4_RX_STAT_PTP_MT_ANNOUNCE 0x00000800
|
|
#define DES4_RX_STAT_PTP_MT_SIGNALLING 0x00000A00
|
|
#define DES4_RX_STAT_PTP_MT_RESERVED 0x00000F00
|
|
#define DES4_RX_STAT_IPV6 0x00000080
|
|
#define DES4_RX_STAT_IPV4 0x00000040
|
|
#define DES4_RX_STAT_IP_CHK_BYPASSED 0x00000020
|
|
#define DES4_RX_STAT_IP_PAYLOAD_ERR 0x00000010
|
|
#define DES4_RX_STAT_IP_HEADER_ERR 0x00000008
|
|
#define DES4_RX_STAT_PAYLOAD_M 0x00000007
|
|
#define DES4_RX_STAT_PAYLOAD_UNKNOWN 0x00000000
|
|
#define DES4_RX_STAT_PAYLOAD_UDP 0x00000001
|
|
#define DES4_RX_STAT_PAYLOAD_TCP 0x00000002
|
|
#define DES4_RX_STAT_PAYLOAD_ICMP 0x00000003
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values used in the ui32BusConfig parameter to EMACInit().
|
|
//
|
|
//***************************************************************************
|
|
#define EMAC_BCONFIG_DMA_PRIO_WEIGHT_M 0x30000000
|
|
#define EMAC_BCONFIG_DMA_PRIO_WEIGHT_1 0x00000000
|
|
#define EMAC_BCONFIG_DMA_PRIO_WEIGHT_2 0x10000000
|
|
#define EMAC_BCONFIG_DMA_PRIO_WEIGHT_3 0x20000000
|
|
#define EMAC_BCONFIG_DMA_PRIO_WEIGHT_4 0x30000000
|
|
#define EMAC_BCONFIG_TX_PRIORITY 0x08000000
|
|
#define EMAC_BCONFIG_ADDR_ALIGNED 0x02000000
|
|
#define EMAC_BCONFIG_PRIORITY_M 0x0000C000
|
|
#define EMAC_BCONFIG_PRIORITY_1_1 (0 << 14)
|
|
#define EMAC_BCONFIG_PRIORITY_2_1 (1 << 14)
|
|
#define EMAC_BCONFIG_PRIORITY_3_1 (2 << 14)
|
|
#define EMAC_BCONFIG_PRIORITY_4_1 (3 << 14)
|
|
#define EMAC_BCONFIG_PRIORITY_FIXED 0x00000002
|
|
#define EMAC_BCONFIG_FIXED_BURST 0x00010000
|
|
#define EMAC_BCONFIG_MIXED_BURST 0x04000000
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Options used in the ui32Config parameter to EMACPHYConfigSet().
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_PHY_TYPE_INTERNAL 0x00000000
|
|
#define EMAC_PHY_TYPE_EXTERNAL_MII 0x80000000
|
|
#define EMAC_PHY_TYPE_EXTERNAL_RMII 0xC0000000
|
|
#define EMAC_PHY_INT_NIB_TXERR_DET_DIS 0x01000000
|
|
#define EMAC_PHY_INT_RX_ER_DURING_IDLE 0x00800000
|
|
#define EMAC_PHY_INT_ISOLATE_MII_LLOSS 0x00400000
|
|
#define EMAC_PHY_INT_LINK_LOSS_RECOVERY 0x00200000
|
|
#define EMAC_PHY_INT_TDRRUN 0x00100000
|
|
#define EMAC_PHY_INT_LD_ON_RX_ERR_COUNT 0x00040000
|
|
#define EMAC_PHY_INT_LD_ON_MTL3_ERR_COUNT 0x00020000
|
|
#define EMAC_PHY_INT_LD_ON_LOW_SNR 0x00010000
|
|
#define EMAC_PHY_INT_LD_ON_SIGNAL_ENERGY 0x00008000
|
|
#define EMAC_PHY_INT_POLARITY_SWAP 0x00004000
|
|
#define EMAC_PHY_INT_MDI_SWAP 0x00002000
|
|
#define EMAC_PHY_INT_ROBUST_MDIX 0x00001000
|
|
#define EMAC_PHY_INT_FAST_MDIX 0x00000800
|
|
#define EMAC_PHY_INT_MDIX_EN 0x00000400
|
|
#define EMAC_PHY_INT_FAST_RXDV_DETECT 0x00000200
|
|
#define EMAC_PHY_INT_FAST_L_UP_DETECT 0x00000100
|
|
#define EMAC_PHY_INT_EXT_FULL_DUPLEX 0x00000080
|
|
#define EMAC_PHY_INT_FAST_AN_80_50_35 0x00000040
|
|
#define EMAC_PHY_INT_FAST_AN_120_75_50 0x00000050
|
|
#define EMAC_PHY_INT_FAST_AN_140_150_100 0x00000060
|
|
#define EMAC_PHY_FORCE_10B_T_HALF_DUPLEX 0x00000000
|
|
#define EMAC_PHY_FORCE_10B_T_FULL_DUPLEX 0x00000002
|
|
#define EMAC_PHY_FORCE_100B_T_HALF_DUPLEX 0x00000004
|
|
#define EMAC_PHY_FORCE_100B_T_FULL_DUPLEX 0x00000006
|
|
#define EMAC_PHY_AN_10B_T_HALF_DUPLEX 0x00000008
|
|
#define EMAC_PHY_AN_10B_T_FULL_DUPLEX 0x0000000A
|
|
#define EMAC_PHY_AN_100B_T_HALF_DUPLEX 0x0000000C
|
|
#define EMAC_PHY_AN_100B_T_FULL_DUPLEX 0x0000000E
|
|
#define EMAC_PHY_INT_HOLD 0x00000001
|
|
|
|
#define EMAC_PHY_TYPE_MASK 0xC0000000
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Options used in the ui32Config parameter to EMACConfigSet().
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_CONFIG_USE_MACADDR1 0x40000000
|
|
#define EMAC_CONFIG_USE_MACADDR0 0x00000000
|
|
#define EMAC_CONFIG_SA_FROM_DESCRIPTOR 0x00000000
|
|
#define EMAC_CONFIG_SA_INSERT 0x20000000
|
|
#define EMAC_CONFIG_SA_REPLACE 0x30000000
|
|
#define EMAC_CONFIG_2K_PACKETS 0x08000000
|
|
#define EMAC_CONFIG_STRIP_CRC 0x02000000
|
|
#define EMAC_CONFIG_JABBER_DISABLE 0x00400000
|
|
#define EMAC_CONFIG_JUMBO_ENABLE 0x00100000
|
|
#define EMAC_CONFIG_IF_GAP_MASK 0x000E0000
|
|
#define EMAC_CONFIG_IF_GAP_96BITS (0x0 << 17)
|
|
#define EMAC_CONFIG_IF_GAP_88BITS (0x1 << 17)
|
|
#define EMAC_CONFIG_IF_GAP_80BITS (0x2 << 17)
|
|
#define EMAC_CONFIG_IF_GAP_72BITS (0x3 << 17)
|
|
#define EMAC_CONFIG_IF_GAP_64BITS (0x4 << 17)
|
|
#define EMAC_CONFIG_IF_GAP_56BITS (0x5 << 17)
|
|
#define EMAC_CONFIG_IF_GAP_48BITS (0x6 << 17)
|
|
#define EMAC_CONFIG_IF_GAP_40BITS (0x7 << 17)
|
|
#define EMAC_CONFIG_CS_DISABLE 0x00010000
|
|
#define EMAC_CONFIG_100MBPS 0x00004000
|
|
#define EMAC_CONFIG_10MBPS 0x00000000
|
|
#define EMAC_CONFIG_RX_OWN_DISABLE 0x00002000
|
|
#define EMAC_CONFIG_LOOPBACK 0x00001000
|
|
#define EMAC_CONFIG_FULL_DUPLEX 0x00000800
|
|
#define EMAC_CONFIG_HALF_DUPLEX 0x00000000
|
|
#define EMAC_CONFIG_CHECKSUM_OFFLOAD 0x00000400
|
|
#define EMAC_CONFIG_RETRY_DISABLE 0x00000200
|
|
#define EMAC_CONFIG_AUTO_CRC_STRIPPING 0x00000080
|
|
#define EMAC_CONFIG_BO_MASK 0x00000060
|
|
#define EMAC_CONFIG_BO_LIMIT_1024 (0x0 << 5)
|
|
#define EMAC_CONFIG_BO_LIMIT_256 (0x1 << 5)
|
|
#define EMAC_CONFIG_BO_LIMIT_16 (0x2 << 5)
|
|
#define EMAC_CONFIG_BO_LIMIT_2 (0x3 << 5)
|
|
#define EMAC_CONFIG_DEFERRAL_CHK_ENABLE 0x00000010
|
|
#define EMAC_CONFIG_PREAMBLE_MASK 0x00000003
|
|
#define EMAC_CONFIG_7BYTE_PREAMBLE 0x00000000
|
|
#define EMAC_CONFIG_5BYTE_PREAMBLE 0x00000001
|
|
#define EMAC_CONFIG_3BYTE_PREAMBLE 0x00000002
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Options used in the ui32ModeFlags parameter to EMACConfigSet().
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_MODE_KEEP_BAD_CRC 0x04000000
|
|
#define EMAC_MODE_RX_STORE_FORWARD 0x02000000
|
|
#define EMAC_MODE_RX_FLUSH_DISABLE 0x01000000
|
|
#define EMAC_MODE_TX_STORE_FORWARD 0x00200000
|
|
#define EMAC_MODE_TX_THRESHOLD_16_BYTES (7 << 14)
|
|
#define EMAC_MODE_TX_THRESHOLD_24_BYTES (6 << 14)
|
|
#define EMAC_MODE_TX_THRESHOLD_32_BYTES (5 << 14)
|
|
#define EMAC_MODE_TX_THRESHOLD_40_BYTES (4 << 14)
|
|
#define EMAC_MODE_TX_THRESHOLD_64_BYTES (0 << 14)
|
|
#define EMAC_MODE_TX_THRESHOLD_128_BYTES (1 << 14)
|
|
#define EMAC_MODE_TX_THRESHOLD_192_BYTES (2 << 14)
|
|
#define EMAC_MODE_TX_THRESHOLD_256_BYTES (3 << 14)
|
|
#define EMAC_MODE_RX_ERROR_FRAMES 0x00000080
|
|
#define EMAC_MODE_RX_UNDERSIZED_FRAMES 0x00000040
|
|
#define EMAC_MODE_RX_THRESHOLD_64_BYTES (0 << 3)
|
|
#define EMAC_MODE_RX_THRESHOLD_32_BYTES (1 << 3)
|
|
#define EMAC_MODE_RX_THRESHOLD_96_BYTES (2 << 3)
|
|
#define EMAC_MODE_RX_THRESHOLD_128_BYTES (3 << 3)
|
|
#define EMAC_MODE_OPERATE_2ND_FRAME 0x00000002
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// These two values may be returned by EMACConfigGet() in the *pui32Config
|
|
// parameter. The transmitter and receiver are, however, enabled and disabled
|
|
// using independent functions, EMACTxEnable/Disable() and
|
|
// EMACRxEnable/Disable().
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_CONFIG_TX_ENABLED 0x00000008
|
|
#define EMAC_CONFIG_RX_ENABLED 0x00000004
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// These two values may be returned by EMACConfigGet() in the *pui32Mode
|
|
// parameter. The transmit and receive DMA channels are, however, enabled and
|
|
// disabled using independent functions, EMACTxEnable/Disable() and
|
|
// EMACRxEnable/Disable().
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_MODE_TX_DMA_ENABLED 0x00002000
|
|
#define EMAC_MODE_RX_DMA_ENABLED 0x00000002
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// These values may be passed to EMACFrameFilterSet() in the ui32FilterOpts
|
|
// parameter, and are returned by EMACFrameFilterGet().
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_FRMFILTER_RX_ALL 0x80000000
|
|
#define EMAC_FRMFILTER_VLAN 0x00010000
|
|
#define EMAC_FRMFILTER_HASH_AND_PERFECT 0x00000400
|
|
#define EMAC_FRMFILTER_SADDR 0x00000200
|
|
#define EMAC_FRMFILTER_INV_SADDR 0x00000100
|
|
#define EMAC_FRMFILTER_PASS_MASK (0x03 << 6)
|
|
#define EMAC_FRMFILTER_PASS_NO_CTRL (0x00 << 6)
|
|
#define EMAC_FRMFILTER_PASS_NO_PAUSE (0x01 << 6)
|
|
#define EMAC_FRMFILTER_PASS_ALL_CTRL (0x02 << 6)
|
|
#define EMAC_FRMFILTER_PASS_ADDR_CTRL (0x03 << 6)
|
|
#define EMAC_FRMFILTER_BROADCAST 0x00000020
|
|
#define EMAC_FRMFILTER_PASS_MULTICAST 0x00000010
|
|
#define EMAC_FRMFILTER_INV_DADDR 0x00000008
|
|
#define EMAC_FRMFILTER_HASH_MULTICAST 0x00000004
|
|
#define EMAC_FRMFILTER_HASH_UNICAST 0x00000002
|
|
#define EMAC_FRMFILTER_PROMISCUOUS 0x00000001
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values which may be returned by EMACStatusGet().
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_STATUS_TX_NOT_EMPTY 0x01000000
|
|
#define EMAC_STATUS_TX_WRITING_FIFO 0x00400000
|
|
#define EMAC_STATUS_TRC_STATE_MASK 0x00300000
|
|
#define EMAC_STATUS_TRC_STATE_IDLE (0x00 << 20)
|
|
#define EMAC_STATUS_TRC_STATE_READING (0x01 << 20)
|
|
#define EMAC_STATUS_TRC_STATE_WAITING (0x02 << 20)
|
|
#define EMAC_STATUS_TRC_STATE_STATUS (0x03 << 20)
|
|
#define EMAC_STATUS_TX_PAUSED 0x00080000
|
|
#define EMAC_STATUS_TFC_STATE_MASK 0x00060000
|
|
#define EMAC_STATUS_TFC_STATE_IDLE (0x00 << 17)
|
|
#define EMAC_STATUS_TFC_STATE_WAITING (0x01 << 17)
|
|
#define EMAC_STATUS_TFC_STATE_PAUSING (0x02 << 17)
|
|
#define EMAC_STATUS_TFC_STATE_WRITING (0x03 << 17)
|
|
#define EMAC_STATUS_MAC_NOT_IDLE 0x00010000
|
|
#define EMAC_STATUS_RX_FIFO_LEVEL_MASK 0x00000300
|
|
#define EMAC_STATUS_RX_FIFO_EMPTY (0x00 << 8)
|
|
#define EMAC_STATUS_RX_FIFO_BELOW (0x01 << 8)
|
|
#define EMAC_STATUS_RX_FIFO_ABOVE (0x02 << 8)
|
|
#define EMAC_STATUS_RX_FIFO_FULL (0x03 << 8)
|
|
#define EMAC_STATUS_RX_FIFO_STATE_MASK 0x00000060
|
|
#define EMAC_STATUS_RX_FIFO_IDLE (0x00 << 5)
|
|
#define EMAC_STATUS_RX_FIFO_READING (0x01 << 5)
|
|
#define EMAC_STATUS_RX_FIFO_STATUS (0x02 << 5)
|
|
#define EMAC_STATUS_RX_FIFO_FLUSHING (0x03 << 5)
|
|
#define EMAC_STATUS_RWC_ACTIVE 0x00000010
|
|
#define EMAC_STATUS_RPE_ACTIVE 0x00000001
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values which may be returned by EMACDMAStateGet().
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_DMA_TXSTAT_MASK (0x07 << 20)
|
|
#define EMAC_DMA_TXSTAT_STOPPED (0x00 << 20)
|
|
#define EMAC_DMA_TXSTAT_RUN_FETCH_DESC (0x01 << 20)
|
|
#define EMAC_DMA_TXSTAT_RUN_WAIT_STATUS (0x02 << 20)
|
|
#define EMAC_DMA_TXSTAT_RUN_READING (0x03 << 20)
|
|
#define EMAC_DMA_TXSTAT_RUN_CLOSE_DESC (0x07 << 20)
|
|
#define EMAC_DMA_TXSTAT_TS_WRITE (0x04 << 20)
|
|
#define EMAC_DMA_TXSTAT_SUSPENDED (0x06 << 20)
|
|
|
|
#define EMAC_DMA_RXSTAT_MASK (0x07 << 17)
|
|
#define EMAC_DMA_RXSTAT_STOPPED (0x00 << 17)
|
|
#define EMAC_DMA_RXSTAT_RUN_FETCH_DESC (0x01 << 17)
|
|
#define EMAC_DMA_RXSTAT_RUN_WAIT_PACKET (0x03 << 17)
|
|
#define EMAC_DMA_RXSTAT_SUSPENDED (0x04 << 17)
|
|
#define EMAC_DMA_RXSTAT_RUN_CLOSE_DESC (0x05 << 17)
|
|
#define EMAC_DMA_RXSTAT_TS_WRITE (0x06 << 17)
|
|
#define EMAC_DMA_RXSTAT_RUN_RECEIVING (0x07 << 17)
|
|
|
|
#define EMAC_TX_DMA_STATE(x) ((x) & EMAC_DMA_TXSTAT_MASK)
|
|
#define EMAC_RX_DMA_STATE(x) ((x) & EMAC_DMA_RXSTAT_MASK)
|
|
|
|
#define EMAC_DMA_ERROR 0x00002000
|
|
#define EMAC_DMA_ERR_MASK 0x03800000
|
|
#define EMAC_DMA_ERR_RX_DATA_WRITE 0x00000000
|
|
#define EMAC_DMA_ERR_TX_DATA_READ 0x01800000
|
|
#define EMAC_DMA_ERR_RX_DESC_WRITE 0x02000000
|
|
#define EMAC_DMA_ERR_TX_DESC_WRITE 0x02800000
|
|
#define EMAC_DMA_ERR_RX_DESC_READ 0x03000000
|
|
#define EMAC_DMA_ERR_TX_DESC_READ 0x03800000
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values which may be ORed together in the ui32Config parameter passed to
|
|
// EMACAddrFilterSet and which may be returned by EMACAddrFilterGet.
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_FILTER_ADDR_ENABLE 0x80000000
|
|
#define EMAC_FILTER_SOURCE_ADDR 0x40000000
|
|
#define EMAC_FILTER_MASK_BYTE_6 0x20000000
|
|
#define EMAC_FILTER_MASK_BYTE_5 0x10000000
|
|
#define EMAC_FILTER_MASK_BYTE_4 0x08000000
|
|
#define EMAC_FILTER_MASK_BYTE_3 0x04000000
|
|
#define EMAC_FILTER_MASK_BYTE_2 0x03000000
|
|
#define EMAC_FILTER_MASK_BYTE_1 0x01000000
|
|
|
|
#define EMAC_FILTER_BYTE_MASK_M 0x3F000000
|
|
#define EMAC_FILTER_BYTE_MASK_S 24
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Flags passed to EMACTimestampConfigSet or returned from
|
|
// EMACTimestampConfigGet.
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_TS_MAC_FILTER_ENABLE 0x00040000
|
|
#define EMAC_TS_MAC_FILTER_DISABLE 0x00000000
|
|
#define EMAC_TS_SYNC_FOLLOW_DREQ_DRESP 0x00000000
|
|
#define EMAC_TS_SYNC_ONLY 0x00004000
|
|
#define EMAC_TS_DELAYREQ_ONLY 0x0000C000
|
|
#define EMAC_TS_ALL 0x00010000
|
|
#define EMAC_TS_SYNC_PDREQ_PDRESP 0x00014000
|
|
#define EMAC_TS_DREQ_PDREQ_PDRESP 0x0001C000
|
|
#define EMAC_TS_SYNC_DELAYREQ 0x00020000
|
|
#define EMAC_TS_PDREQ_PDRESP 0x00030000
|
|
#define EMAC_TS_PROCESS_IPV4_UDP 0x00002000
|
|
#define EMAC_TS_PROCESS_IPV6_UDP 0x00001000
|
|
#define EMAC_TS_PROCESS_ETHERNET 0x00000800
|
|
#define EMAC_TS_PTP_VERSION_2 0x00000400
|
|
#define EMAC_TS_PTP_VERSION_1 0x00000000
|
|
#define EMAC_TS_DIGITAL_ROLLOVER 0x00000200
|
|
#define EMAC_TS_BINARY_ROLLOVER 0x00000000
|
|
#define EMAC_TS_ALL_RX_FRAMES 0x00000100
|
|
#define EMAC_TS_UPDATE_FINE 0x00000002
|
|
#define EMAC_TS_UPDATE_COARSE 0x00000000
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Some register bit definitions relating to external PHYs. These are not
|
|
// relevant (or available) when using the internal Ethernet PHY but having
|
|
// the definitions here helps when using an external MII or RMII PHY.
|
|
//
|
|
//*****************************************************************************
|
|
#define EPHY_SCR_INPOL_EXT 0x00000008
|
|
#define EPHY_SCR_TINT_EXT 0x00000004
|
|
#define EPHY_SCR_INTEN_EXT 0x00000002
|
|
#define EPHY_SCR_INTOE_EXT 0x00000001
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// These interrupt sources may be passed to EMACIntEnable() and
|
|
// EMACIntDisable() to enable or disable various Ethernet interrupt sources.
|
|
//
|
|
//*****************************************************************************
|
|
//
|
|
// Note that interrupts relating to timestamping and power management must be
|
|
// independently enabled via calls to functions EMACTimestampTargetIntEnable
|
|
// and EMACPowerManagementControlSet.
|
|
//
|
|
// EMAC_INT_PHY is deliberately set to a reserved bit in the MAC interrupt
|
|
// register. We handle the fact that the PHY interrupt is controlled via an
|
|
// independent register within the code. If we didn't do this, the app would
|
|
// have to enable the MAC interrupt then enable the PHY interrupt via a
|
|
// different API (since they share a vector). To further complicate matters,
|
|
// they would have to call EMACIntStatus() and then, if it returned 0,
|
|
// read the PHY interrupt status to see that it fired. This would be nasty
|
|
// and unfriendly so we hide it inside DriverLib.
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_INT_PHY 0x80000000
|
|
#define EMAC_INT_EARLY_RECEIVE 0x00004000
|
|
#define EMAC_INT_BUS_ERROR 0x00002000
|
|
#define EMAC_INT_EARLY_TRANSMIT 0x00000400
|
|
#define EMAC_INT_RX_WATCHDOG 0x00000200
|
|
#define EMAC_INT_RX_STOPPED 0x00000100
|
|
#define EMAC_INT_RX_NO_BUFFER 0x00000080
|
|
#define EMAC_INT_RECEIVE 0x00000040
|
|
#define EMAC_INT_TX_UNDERFLOW 0x00000020
|
|
#define EMAC_INT_RX_OVERFLOW 0x00000010
|
|
#define EMAC_INT_TX_JABBER 0x00000008
|
|
#define EMAC_INT_TX_NO_BUFFER 0x00000004
|
|
#define EMAC_INT_TX_STOPPED 0x00000002
|
|
#define EMAC_INT_TRANSMIT 0x00000001
|
|
|
|
//
|
|
// These interrupt sources are summary indicators. They are readable
|
|
// using EMACIntStatus() and must be cleared using EMACIntClear(). They
|
|
// may be enabled or disabled independently of the group of interrupts that
|
|
// they are derived from but offer merely a simple way to be informed of a
|
|
// normal or abnormal condition requiring software attention.
|
|
//
|
|
// EMAC_INT_NORMAL_INT is the logical OR of the masked state of
|
|
// EMAC_INT_TRANSMIT | EMAC_INT_RECEIVE | EMAC_INT_TX_NO_BUFFER |
|
|
// EMAC_INT_EARLY_RECEIVE.
|
|
//
|
|
// EMAC_INT_ABNORMAL_INT is the logical OR of the masked state of
|
|
// EMAC_INT_TX_STOPPED | EMAC_INT_TX_JABBER | EMAC_INT_RX_OVERFLOW |
|
|
// EMAC_INT_TX_UNDERFLOW | EMAC_INT_RX_NO_BUFFER | EMAC_INT_RX_STOPPED |
|
|
// EMAC_INT_RX_WATCHDOG | EMAC_INT_EARLY_TRANSMIT | EMAC_INT_BUS_ERROR.
|
|
//
|
|
#define EMAC_INT_NORMAL_INT 0x00010000
|
|
#define EMAC_INT_ABNORMAL_INT 0x00008000
|
|
|
|
//
|
|
// This interrupt source is readable using EMACIntStatus but must
|
|
// be cleared by calling the EMACTimestampIntStatus().
|
|
//
|
|
#define EMAC_INT_TIMESTAMP 0x20000000
|
|
|
|
//
|
|
// Interrupt sources which may be returned from EMACTimestampIntStatus().
|
|
//
|
|
#define EMAC_TS_INT_TARGET_REACHED 0x00000002
|
|
#define EMAC_TS_INT_TS_SEC_OVERFLOW 0x00000001
|
|
|
|
//
|
|
// This interrupt source is readable using EMACIntStatus but must
|
|
// be cleared by calling EMACPowerManagementStatusGet().
|
|
//
|
|
#define EMAC_INT_POWER_MGMNT 0x10000000
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Configuration flags that may be passed in the ui32FreqConfig parameter to
|
|
// EMACTimestampPPSSimpleModeSet().
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_PPS_SINGLE_PULSE 0x00000000
|
|
#define EMAC_PPS_1HZ 0x00000001
|
|
#define EMAC_PPS_2HZ 0x00000002
|
|
#define EMAC_PPS_4HZ 0x00000003
|
|
#define EMAC_PPS_8HZ 0x00000004
|
|
#define EMAC_PPS_16HZ 0x00000005
|
|
#define EMAC_PPS_32HZ 0x00000006
|
|
#define EMAC_PPS_64HZ 0x00000007
|
|
#define EMAC_PPS_128HZ 0x00000008
|
|
#define EMAC_PPS_256HZ 0x00000009
|
|
#define EMAC_PPS_512HZ 0x0000000A
|
|
#define EMAC_PPS_1024HZ 0x0000000B
|
|
#define EMAC_PPS_2048HZ 0x0000000C
|
|
#define EMAC_PPS_4096HZ 0x0000000D
|
|
#define EMAC_PPS_8192HZ 0x0000000E
|
|
#define EMAC_PPS_16384HZ 0x0000000F
|
|
#define EMAC_PPS_32768HZ 0x00000010
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Configuration flags that may be passed in the ui32Config parameter to
|
|
// EMACTimestampPPSCommandModeSet().
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_PPS_TARGET_INT 0x00000000
|
|
#define EMAC_PPS_TARGET_PPS 0x00000060
|
|
#define EMAC_PPS_TARGET_BOTH 0x00000040
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Commands which may be passed to EMACTimestampPPSCmd.
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_PPS_COMMAND_NONE 0x00
|
|
#define EMAC_PPS_COMMAND_START_SINGLE 0x01
|
|
#define EMAC_PPS_COMMAND_START_TRAIN 0x02
|
|
#define EMAC_PPS_COMMAND_CANCEL_START 0x03
|
|
#define EMAC_PPS_COMMAND_STOP_AT_TIME 0x04
|
|
#define EMAC_PPS_COMMAND_STOP_NOW 0x05
|
|
#define EMAC_PPS_COMMAND_CANCEL_STOP 0x06
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values which may be passed to EMACVLANRxConfigSet in the ui32Config
|
|
// parameter and which may be returned from EMACVLANRxConfigGet.
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_VLAN_RX_HASH_ENABLE 0x00080000
|
|
#define EMAC_VLAN_RX_HASH_DISABLE 0x00000000
|
|
#define EMAC_VLAN_RX_SVLAN_ENABLE 0x00040000
|
|
#define EMAC_VLAN_RX_SVLAN_DISABLE 0x00000000
|
|
#define EMAC_VLAN_RX_NORMAL_MATCH 0x00000000
|
|
#define EMAC_VLAN_RX_INVERSE_MATCH 0x00020000
|
|
#define EMAC_VLAN_RX_12BIT_TAG 0x00010000
|
|
#define EMAC_VLAN_RX_16BIT_TAG 0x00000000
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values which may be passed to EMACVLANTxConfigSet in the ui32Config
|
|
// parameter and which may be returned from EMACVLANTxConfigGet.
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_VLAN_TX_CVLAN 0x00000000
|
|
#define EMAC_VLAN_TX_SVLAN 0x00080000
|
|
#define EMAC_VLAN_TX_USE_VLC 0x00040000
|
|
#define EMAC_VLAN_TX_VLC_NONE 0x00000000
|
|
#define EMAC_VLAN_TX_VLC_DELETE 0x00010000
|
|
#define EMAC_VLAN_TX_VLC_INSERT 0x00020000
|
|
#define EMAC_VLAN_TX_VLC_REPLACE 0x00030000
|
|
|
|
#define EMAC_VLAN_TX_VLC_MASK 0x00030000
|
|
|
|
#define EMAC_RWU_FILTER_ENABLE 1
|
|
#define EMAC_RWU_FILTER_DISABLE 0
|
|
#define EMAC_RWU_FILTER_MULTICAST 8
|
|
#define EMAC_RWU_FILTER_UNICAST 0
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following structure fields must be packed.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef ewarm
|
|
#pragma pack(1)
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! This structure defines up to 4 filters that can be used to define specific
|
|
//! frames which will cause the MAC to wake up from sleep mode.
|
|
//
|
|
//*****************************************************************************
|
|
typedef struct
|
|
{
|
|
//
|
|
//! A byte mask for each filter defining which bytes from a sequence of
|
|
//! 31 (bit 31 must be clear in each mask) are used to filter incoming
|
|
//! packets. A 1 indicates that the relevant byte is used to update the
|
|
//! CRC16 for the filter, a 0 indicates that the byte is ignored.
|
|
//
|
|
uint32_t pui32ByteMask[4];
|
|
|
|
//
|
|
//! Defines whether each filter is enabled and, if so, whether it filters
|
|
//! multicast or unicast frames. Valid values are one of
|
|
//! EMAC_RWU_FILTER_ENABLE or EMAC_RWU_FILTER_DISABLE ORed with one of
|
|
//! EMAC_RWU_FILTER_UNICAST or EMAC_RWU_FILTER_MULTICAST.
|
|
//
|
|
uint8_t pui8Command[4];
|
|
|
|
//
|
|
//! Determines the byte offset within the frame at which the filter starts
|
|
//! examining bytes. The minimum value for each offset is 12. The first
|
|
//! byte of a frame is offset 0.
|
|
//
|
|
uint8_t pui8Offset[4];
|
|
|
|
//
|
|
//! The CRC16 value that is expected for each filter if it passes. The
|
|
//! CRC is calculated using all bytes indicated by the filter's mask.
|
|
//
|
|
uint16_t pui16CRC[4];
|
|
}
|
|
#if defined(ccs) || \
|
|
defined(codered) || \
|
|
defined(gcc) || \
|
|
defined(rvmdk) || \
|
|
defined(__ARMCC_VERSION) || \
|
|
defined(sourcerygxx)
|
|
__attribute__ ((packed)) tEMACWakeUpFrameFilter;
|
|
#else
|
|
tEMACWakeUpFrameFilter;
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Turn off structure packing again.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef ewarm
|
|
#pragma pack()
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values which may be ORed together and used in the ui32Flags parameter to
|
|
// EMACPowerManagementControlSet. These may also returned be from a call to
|
|
// EMACPowerManagementControlGet.
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_PMT_GLOBAL_UNICAST_ENABLE 0x00000200
|
|
#define EMAC_PMT_WAKEUP_PACKET_ENABLE 0x00000004
|
|
#define EMAC_PMT_MAGIC_PACKET_ENABLE 0x00000002
|
|
#define EMAC_PMT_POWER_DOWN 0x00000001
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Values which may be ORed together and returned from a call to
|
|
// EMACPowerManagementStatusGet. This call will also return
|
|
// EMAC_PMT_POWER_DOWN if the MAC is in power-down mode.
|
|
//
|
|
//*****************************************************************************
|
|
#define EMAC_PMT_WAKEUP_PACKET_RECEIVED 0x00000040
|
|
#define EMAC_PMT_MAGIC_PACKET_RECEIVED 0x00000020
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Close the Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Public function prototypes.
|
|
//
|
|
//*****************************************************************************
|
|
extern void EMACInit(uint32_t ui32Base, uint32_t ui32SysClk,
|
|
uint32_t ui32BusConfig, uint32_t ui32RxBurst,
|
|
uint32_t ui32TxBurst, uint32_t ui32DescSkipSize);
|
|
extern void EMACReset(uint32_t ui32Base);
|
|
extern void EMACPHYConfigSet(uint32_t ui32Base, uint32_t ui32Config);
|
|
extern void EMACConfigSet(uint32_t ui32Base, uint32_t ui32Config,
|
|
uint32_t ui32ModeFlags,
|
|
uint32_t ui32RxMaxFrameSize);
|
|
extern void EMACFrameFilterSet(uint32_t ui32Base, uint32_t ui32FilterOpts);
|
|
extern uint32_t EMACFrameFilterGet(uint32_t ui32Base);
|
|
extern void EMACHashFilterSet(uint32_t ui32Base, uint32_t ui32HashHi,
|
|
uint32_t ui32HashLo);
|
|
extern void EMACHashFilterGet(uint32_t ui32Base, uint32_t *pui32HashHi,
|
|
uint32_t *pui32HashLo);
|
|
extern uint32_t EMACHashFilterBitCalculate(uint8_t *pui8MACAddr);
|
|
extern void EMACTxDMAPollDemand(uint32_t ui32Base);
|
|
extern void EMACRxDMAPollDemand(uint32_t ui32Base);
|
|
extern void EMACRxDMADescriptorListSet(uint32_t ui32Base,
|
|
tEMACDMADescriptor *pDescriptor);
|
|
extern tEMACDMADescriptor *EMACRxDMADescriptorListGet(uint32_t ui32Base);
|
|
extern tEMACDMADescriptor *EMACRxDMACurrentDescriptorGet(uint32_t ui32Base);
|
|
extern uint8_t *EMACRxDMACurrentBufferGet(uint32_t ui32Base);
|
|
extern void EMACTxDMADescriptorListSet(uint32_t ui32Base,
|
|
tEMACDMADescriptor *pDescriptor);
|
|
extern tEMACDMADescriptor *EMACTxDMADescriptorListGet(uint32_t ui32Base);
|
|
extern tEMACDMADescriptor *EMACTxDMACurrentDescriptorGet(uint32_t ui32Base);
|
|
extern uint8_t *EMACTxDMACurrentBufferGet(uint32_t ui32Base);
|
|
extern void EMACConfigGet(uint32_t ui32Base, uint32_t *pui32Config,
|
|
uint32_t *pui32Mode, uint32_t *pui32RxMaxFrameSize);
|
|
extern void EMACAddrSet(uint32_t ui32Base, uint32_t ui32Index,
|
|
const uint8_t *pui8MACAddr);
|
|
extern void EMACAddrGet(uint32_t ui32Base, uint32_t ui32Index,
|
|
uint8_t *pui8MACAddr);
|
|
extern uint32_t EMACNumAddrGet(uint32_t ui32Base);
|
|
extern void EMACAddrFilterSet(uint32_t ui32Base, uint32_t ui32Index,
|
|
uint32_t ui32Config);
|
|
extern uint32_t EMACAddrFilterGet(uint32_t ui32Base, uint32_t ui32Index);
|
|
extern void EMACRxWatchdogTimerSet(uint32_t ui32Base, uint8_t ui8Timeout);
|
|
extern uint32_t EMACStatusGet(uint32_t ui32Base);
|
|
extern uint32_t EMACDMAStateGet(uint32_t ui32Base);
|
|
extern void EMACTxFlush(uint32_t ui32Base);
|
|
extern void EMACTxEnable(uint32_t ui32Base);
|
|
extern void EMACTxDisable(uint32_t ui32Base);
|
|
extern void EMACRxEnable(uint32_t ui32Base);
|
|
extern void EMACRxDisable(uint32_t ui32Base);
|
|
extern void EMACIntEnable(uint32_t ui32Base, uint32_t ui32IntFlags);
|
|
extern void EMACIntDisable(uint32_t ui32Base, uint32_t ui32IntFlags);
|
|
extern uint32_t EMACIntStatus(uint32_t ui32Base, bool bMasked);
|
|
extern void EMACIntClear(uint32_t ui32Base, uint32_t ui32IntFlags);
|
|
extern void EMACIntRegister(uint32_t ui32Base, void (*pfnHandler)(void));
|
|
extern void EMACIntUnregister(uint32_t ui32Base);
|
|
extern void EMACPHYWrite(uint32_t ui32Base, uint8_t ui8PhyAddr,
|
|
uint8_t ui8RegAddr, uint16_t ui16Data);
|
|
extern void EMACPHYExtendedWrite(uint32_t ui32Base, uint8_t ui8PhyAddr,
|
|
uint16_t ui16RegAddr, uint16_t ui16Data);
|
|
extern uint16_t EMACPHYRead(uint32_t ui32Base, uint8_t ui8PhyAddr,
|
|
uint8_t ui8RegAddr);
|
|
extern uint16_t EMACPHYExtendedRead(uint32_t ui32Base, uint8_t ui8PhyAddr,
|
|
uint16_t ui16RegAddr);
|
|
extern void EMACPHYPowerOff(uint32_t ui32Base, uint8_t ui8PhyAddr);
|
|
extern void EMACPHYPowerOn(uint32_t ui32Base, uint8_t ui8PhyAddr);
|
|
extern void EMACTimestampConfigSet(uint32_t ui32Base, uint32_t ui32Config,
|
|
uint32_t ui32SubSecondInc);
|
|
extern uint32_t EMACTimestampConfigGet(uint32_t ui32Base,
|
|
uint32_t *pui32SubSecondInc);
|
|
extern void EMACTimestampAddendSet(uint32_t ui32Base, uint32_t ui32Seconds);
|
|
extern void EMACTimestampEnable(uint32_t ui32Base);
|
|
extern void EMACTimestampDisable(uint32_t ui32Base);
|
|
extern void EMACTimestampSysTimeSet(uint32_t ui32Base, uint32_t ui32Seconds,
|
|
uint32_t ui32SubSeconds);
|
|
extern void EMACTimestampSysTimeGet(uint32_t ui32Base, uint32_t *pui32Seconds,
|
|
uint32_t *pui32SubSeconds);
|
|
extern void EMACTimestampSysTimeUpdate(uint32_t ui32Base, uint32_t ui32Seconds,
|
|
uint32_t ui32SubSeconds, bool bInc);
|
|
extern void EMACTimestampTargetSet(uint32_t ui32Base, uint32_t ui32Seconds,
|
|
uint32_t ui32Nanoseconds);
|
|
extern void EMACTimestampTargetIntEnable(uint32_t ui32Base);
|
|
extern void EMACTimestampTargetIntDisable(uint32_t ui32Base);
|
|
extern uint32_t EMACTimestampIntStatus(uint32_t ui32Base);
|
|
extern void EMACTimestampPPSSimpleModeSet(uint32_t ui32Base,
|
|
uint32_t ui32FreqConfig);
|
|
extern void EMACTimestampPPSCommandModeSet(uint32_t ui32Base,
|
|
uint32_t ui32Config);
|
|
extern void EMACTimestampPPSCommand(uint32_t ui32Base, uint8_t ui8Cmd);
|
|
extern void EMACTimestampPPSPeriodSet(uint32_t ui32Base, uint32_t ui32Period,
|
|
uint32_t ui32Width);
|
|
extern void EMACVLANRxConfigSet(uint32_t ui32Base, uint16_t ui16Tag,
|
|
uint32_t ui32Config);
|
|
extern uint32_t EMACVLANRxConfigGet(uint32_t ui32Base, uint16_t *pui16Tag);
|
|
extern void EMACVLANTxConfigSet(uint32_t ui32Base, uint16_t ui16Tag,
|
|
uint32_t ui32Config);
|
|
extern uint32_t EMACVLANTxConfigGet(uint32_t ui32Base, uint16_t *pui16Tag);
|
|
extern uint32_t EMACVLANHashFilterBitCalculate(uint16_t ui16Tag);
|
|
extern void EMACVLANHashFilterSet(uint32_t ui32Base, uint32_t ui32Hash);
|
|
extern uint32_t EMACVLANHashFilterGet(uint32_t ui32Base);
|
|
extern void EMACRemoteWakeUpFrameFilterSet(uint32_t ui32Base,
|
|
const tEMACWakeUpFrameFilter *pFilter);
|
|
extern void EMACRemoteWakeUpFrameFilterGet(uint32_t ui32Base,
|
|
tEMACWakeUpFrameFilter *pFilter);
|
|
extern void EMACPowerManagementControlSet(uint32_t ui32Base,
|
|
uint32_t ui32Flags);
|
|
extern uint32_t EMACPowerManagementControlGet(uint32_t ui32Base);
|
|
extern uint32_t EMACPowerManagementStatusGet(uint32_t ui32Base);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Mark the end of the C bindings section for C++ compilers.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // __DRIVERLIB_EMAC_H__
|