rt-thread/bsp/nuvoton/libraries/ma35/UsbHostLib/inc/hub.h

125 lines
5.6 KiB
C

/**************************************************************************//**
* @file hub.h
* @version V1.00
* @brief USB Host hub class driver header file.
* @note
* SPDX-License-Identifier: Apache-2.0
* Copyright (C) 2017 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#ifndef _USBH_HUB_H_
#define _USBH_HUB_H_
/// @cond HIDDEN_SYMBOLS
/*--------------------------------------------------------------------------*/
/* Hub class feature selectors (Table 11-17) */
/*--------------------------------------------------------------------------*/
#define FS_C_HUB_LOCAL_POWER 0
#define FS_C_HUB_OVER_CURRENT 1
#define FS_PORT_CONNECTION 0
#define FS_PORT_ENABLE 1
#define FS_PORT_SUSPEND 2
#define FS_PORT_OVER_CURRENT 3
#define FS_PORT_RESET 4
#define FS_PORT_POWER 8
#define FS_C_PORT_CONNECTION 16
#define FS_C_PORT_ENABLE 17
#define FS_C_PORT_SUSPEND 18
#define FS_C_PORT_OVER_CURRENT 19
#define FS_C_PORT_RESET 20
/*--------------------------------------------------------------------------*/
/* Hub/Port staus and change bits */
/*--------------------------------------------------------------------------*/
#define HUB_S_LOCAL_POWER (1UL << 0)
#define HUB_S_OVERCURRENT (1UL << 1)
#define HUB_C_LOCAL_POWER (1UL << 0)
#define HUB_C_OVERCURRENT (1UL << 1)
#define PORT_S_CONNECTION (1UL << 0)
#define PORT_S_ENABLE (1UL << 1)
#define PORT_S_SUSPEND (1UL << 2)
#define PORT_S_OVERCURRENT (1UL << 3)
#define PORT_S_RESET (1UL << 4)
#define PORT_S_PORT_POWER (1UL << 8)
#define PORT_S_LOW_SPEED (1UL << 9)
#define PORT_S_HIGH_SPEED (1UL << 10)
#define PORT_S_TEST (1UL << 11)
#define PORT_S_INDICATOR (1UL << 12)
#define PORT_C_CONNECTION (1UL << 0)
#define PORT_C_ENABLE (1UL << 1)
#define PORT_C_SUSPEND (1UL << 2)
#define PORT_C_OVERCURRENT (1UL << 3)
#define PORT_C_RESET (1UL << 4)
/*--------------------------------------------------------------------------*/
/* Hub descriptor */
/*--------------------------------------------------------------------------*/
typedef struct __attribute__((__packed__))
{
uint8_t bDescLength;
uint8_t bDescriptorType;
uint8_t bNbrPorts;
uint16_t wHubCharacteristics;
uint8_t bPwrOn2PwrGood;
uint8_t bHubContrCurrent;
uint8_t bDeviceRemovble;
uint8_t PortPwrCtrlMask[16];
}
DESC_HUB_T;
/*
* wHubCharacteristics bit field mask
*/
#define HUB_CHAR_LPSM 0x0003 /* 00b: global port power, 01b: per port power, 1x: reserved */
#define HUB_CHAR_COMPOUND 0x0004 /* 1: is part of a compond device, 0: is not. */
#define HUB_CHAR_OCPM 0x0018 /* 00b: global over-current protection, 01b: per port, 1x: reserved */
#define HUB_CHAR_TTTT 0x0060 /* TT think time. 00b: 8FS, 01b: 16FS, 10b: 24FS, 11b: 32FS */
#define HUB_CHAR_PORTIND 0x0080 /* 1: port indicator (LED) supported, 0: not */
/* port indicator status selectors */
#define HUB_LED_AUTO 0
#define HUB_LED_AMBER 1
#define HUB_LED_GREEN 2
#define HUB_LED_OFF 3
/*--------------------------------------------------------------------------*/
/* Port reset retry and time-out settings */
/*--------------------------------------------------------------------------*/
#define HUB_DEBOUNCE_TIME 800 /* Hub connect/disconnect de-bounce time in ms */
#define PORT_RESET_RETRY 3 /* port reset retry times */
#define PORT_RESET_TIME_MS 50 /* port reset time (ms) */
#define PORT_RESET_RETRY_INC_MS 250 /* increased reset time (ms) after reset failed */
#define HUB_STATUS_MAX_BYTE 2 /* maximum number of interrupt-in status bytes */
/* 2 can support up to 16 port hubs */
/* 4 can support up to 32 port hubs */
/* Note!! If modeifed to 4, "uint16_t sc_bitmap" */
/* MUST be changed as "uint32_t sc_bitmap" */
typedef struct hub_dev_t
{
IFACE_T *iface; /*!< Interface device of this hub \hideinitializer */
UTR_T *utr; /*!< Interrupt in UTR of this hub \hideinitializer */
// uint8_t buff[HUB_STATUS_MAX_BYTE]; /*!< Interrupt in buffer \hideinitializer */
uint16_t sc_bitmap; /*!< Hub and Port Status Change Bitmap \hideinitializer */
uint8_t bNbrPorts; /*!< Number of ports \hideinitializer */
uint8_t bPwrOn2PwrGood; /*!< Hub power on to power good time \hideinitializer */
char pos_id[MAX_HUB_DEVICE + 1]; /*!< Hub position identifier \hideinitializer */
int (*port_reset)(struct hub_dev_t *hub, int port); /*!< Port reset function \hideinitializer */
UDEV_T *children; /*!< Child device list. \hideinitializer */
} HUB_DEV_T;
/// @endcond
#endif /* _USBH_HUB_H_ */