rt-thread/bsp/tm4c129x/libraries/driverlib/gpio.h

206 lines
10 KiB
C

//*****************************************************************************
//
// gpio.h - Defines and Macros for GPIO API.
//
// Copyright (c) 2005-2020 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 2.2.0.295 of the Tiva Peripheral Driver Library.
//
//*****************************************************************************
#ifndef __DRIVERLIB_GPIO_H__
#define __DRIVERLIB_GPIO_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
//*****************************************************************************
//
// The following values define the bit field for the ui8Pins argument to
// several of the APIs.
//
//*****************************************************************************
#define GPIO_PIN_0 0x00000001 // GPIO pin 0
#define GPIO_PIN_1 0x00000002 // GPIO pin 1
#define GPIO_PIN_2 0x00000004 // GPIO pin 2
#define GPIO_PIN_3 0x00000008 // GPIO pin 3
#define GPIO_PIN_4 0x00000010 // GPIO pin 4
#define GPIO_PIN_5 0x00000020 // GPIO pin 5
#define GPIO_PIN_6 0x00000040 // GPIO pin 6
#define GPIO_PIN_7 0x00000080 // GPIO pin 7
//*****************************************************************************
//
// Values that can be passed to GPIODirModeSet as the ui32PinIO parameter, and
// returned from GPIODirModeGet.
//
//*****************************************************************************
#define GPIO_DIR_MODE_IN 0x00000000 // Pin is a GPIO input
#define GPIO_DIR_MODE_OUT 0x00000001 // Pin is a GPIO output
#define GPIO_DIR_MODE_HW 0x00000002 // Pin is a peripheral function
//*****************************************************************************
//
// Values that can be passed to GPIOIntTypeSet as the ui32IntType parameter,
// and returned from GPIOIntTypeGet.
//
//*****************************************************************************
#define GPIO_FALLING_EDGE 0x00000000 // Interrupt on falling edge
#define GPIO_RISING_EDGE 0x00000004 // Interrupt on rising edge
#define GPIO_BOTH_EDGES 0x00000001 // Interrupt on both edges
#define GPIO_LOW_LEVEL 0x00000002 // Interrupt on low level
#define GPIO_HIGH_LEVEL 0x00000006 // Interrupt on high level
#define GPIO_DISCRETE_INT 0x00010000 // Interrupt for individual pins
//*****************************************************************************
//
// Values that can be passed to GPIOPadConfigSet as the ui32Strength parameter,
// and returned by GPIOPadConfigGet in the *pui32Strength parameter.
//
//*****************************************************************************
#define GPIO_STRENGTH_2MA 0x00000001 // 2mA drive strength
#define GPIO_STRENGTH_4MA 0x00000002 // 4mA drive strength
#define GPIO_STRENGTH_6MA 0x00000065 // 6mA drive strength
#define GPIO_STRENGTH_8MA 0x00000066 // 8mA drive strength
#define GPIO_STRENGTH_8MA_SC 0x0000006E // 8mA drive with slew rate control
#define GPIO_STRENGTH_10MA 0x00000075 // 10mA drive strength
#define GPIO_STRENGTH_12MA 0x00000077 // 12mA drive strength
//*****************************************************************************
//
// Values that can be passed to GPIOPadConfigSet as the ui32PadType parameter,
// and returned by GPIOPadConfigGet in the *pui32PadType parameter.
//
//*****************************************************************************
#define GPIO_PIN_TYPE_STD 0x00000008 // Push-pull
#define GPIO_PIN_TYPE_STD_WPU 0x0000000A // Push-pull with weak pull-up
#define GPIO_PIN_TYPE_STD_WPD 0x0000000C // Push-pull with weak pull-down
#define GPIO_PIN_TYPE_OD 0x00000009 // Open-drain
#define GPIO_PIN_TYPE_ANALOG 0x00000000 // Analog comparator
#define GPIO_PIN_TYPE_WAKE_HIGH 0x00000208 // Hibernate wake, high
#define GPIO_PIN_TYPE_WAKE_LOW 0x00000108 // Hibernate wake, low
//*****************************************************************************
//
// Values that can be passed to GPIOIntEnable() and GPIOIntDisable() functions
// in the ui32IntFlags parameter.
//
//*****************************************************************************
#define GPIO_INT_PIN_0 0x00000001
#define GPIO_INT_PIN_1 0x00000002
#define GPIO_INT_PIN_2 0x00000004
#define GPIO_INT_PIN_3 0x00000008
#define GPIO_INT_PIN_4 0x00000010
#define GPIO_INT_PIN_5 0x00000020
#define GPIO_INT_PIN_6 0x00000040
#define GPIO_INT_PIN_7 0x00000080
#define GPIO_INT_DMA 0x00000100
//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
extern void GPIODirModeSet(uint32_t ui32Port, uint8_t ui8Pins,
uint32_t ui32PinIO);
extern uint32_t GPIODirModeGet(uint32_t ui32Port, uint8_t ui8Pin);
extern void GPIOIntTypeSet(uint32_t ui32Port, uint8_t ui8Pins,
uint32_t ui32IntType);
extern uint32_t GPIOIntTypeGet(uint32_t ui32Port, uint8_t ui8Pin);
extern void GPIOPadConfigSet(uint32_t ui32Port, uint8_t ui8Pins,
uint32_t ui32Strength, uint32_t ui32PadType);
extern void GPIOPadConfigGet(uint32_t ui32Port, uint8_t ui8Pin,
uint32_t *pui32Strength, uint32_t *pui32PadType);
extern void GPIOIntEnable(uint32_t ui32Port, uint32_t ui32IntFlags);
extern void GPIOIntDisable(uint32_t ui32Port, uint32_t ui32IntFlags);
extern uint32_t GPIOIntStatus(uint32_t ui32Port, bool bMasked);
extern void GPIOIntClear(uint32_t ui32Port, uint32_t ui32IntFlags);
extern void GPIOIntRegister(uint32_t ui32Port, void (*pfnIntHandler)(void));
extern void GPIOIntUnregister(uint32_t ui32Port);
extern void GPIOIntRegisterPin(uint32_t ui32Port, uint32_t ui32Pin,
void (*pfnIntHandler)(void));
extern void GPIOIntUnregisterPin(uint32_t ui32Port, uint32_t ui32Pin);
extern int32_t GPIOPinRead(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinWrite(uint32_t ui32Port, uint8_t ui8Pins, uint8_t ui8Val);
extern void GPIOPinConfigure(uint32_t ui32PinConfig);
extern void GPIOPinTypeADC(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeCAN(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeComparator(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeComparatorOutput(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeDIVSCLK(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeEPI(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeEthernetLED(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeEthernetMII(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeGPIOInput(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeGPIOOutput(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeGPIOOutputOD(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeHibernateRTCCLK(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeI2C(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeI2CSCL(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeLCD(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeOneWire(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypePWM(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeQEI(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeSSI(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeTimer(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeTrace(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeUART(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeUSBAnalog(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeUSBDigital(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeWakeHigh(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOPinTypeWakeLow(uint32_t ui32Port, uint8_t ui8Pins);
extern uint32_t GPIOPinWakeStatus(uint32_t ui32Port);
extern void GPIODMATriggerEnable(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIODMATriggerDisable(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOADCTriggerEnable(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOADCTriggerDisable(uint32_t ui32Port, uint8_t ui8Pins);
extern void GPIOUnlockPin(uint32_t ui32Port, uint8_t ui8Pins);
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
#endif // __DRIVERLIB_GPIO_H__