libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/wch/risc-v/ch32v307v-r1/applications/arduino_pinout
History
Meco Man d2c12e2da8 [RTduino] change the pinout group name 2024-03-29 21:49:13 +08:00
..
README.md [RTduino][ch32v307] add English readme 2023-01-13 11:40:57 +08:00
README_zh.md [RTduino][ch32v307] add English readme 2023-01-13 11:40:57 +08:00
Sconscript [RTduino] change the pinout group name 2024-03-29 21:49:13 +08:00
pins_arduino.c [RTduino][ch32v307] add English readme 2023-01-13 11:40:57 +08:00
pins_arduino.h [RTduino] pins_arduino.h add limit check 2024-03-08 09:39:57 +08:00

README.md

The Arduino Compatible for CH32V307V-R1

English | 中文

1 RTduino - Arduino Ecosystem Compatibility Layer for RT-Thread

CH32V307V-R1 board has support RTduino. Users can use Arduino APIs, third party libraries and programming method to program on the board.

1.1 How to Enable RTduino

This board complies with Arduino UNO pins layout. For more details, Please go to the RTduino repository.

Hardware Drivers Config --->
    Onboard Peripheral Drivers --->
        [*] Compatible with Arduino Ecosystem (RTduino)

2 Arduino Pinout

For more information, please see pins_arduino.c and pins_arduino.h.

Arduino Pin CH32 Pin 5V Tolerate Note
0 (D0) PA10 Yes Serial-Rx. Token over by RT-Thread UART device by default
1 (D1) PA9 Yes Serial-Tx. Token over by RT-Thread UART device by default
2 (D2) PA8 Yes PWM1-CH1. Token over by RT-Thread PWM device by default
3 (D3) PA7 No PWM3-CH2. Token over by RT-Thread PWM device by default
4 (D4) PA6 No PWM3-CH1. Token over by RT-Thread PWM device by default
5 (D5) PB5 Yes
6 (D6) PB8 Yes PWM4-CH3. Token over by RT-Thread PWM device by default
7 (D7) PB9 Yes PWM4-CH4. Token over by RT-Thread PWM device by default
8 (D8) PB1 No PWM3-CH4. Token over by RT-Thread PWM device by default
9 (D9) PB0 No PWM3-CH3. Token over by RT-Thread PWM device by default
10 (D10) PB12 Yes
11 (D11) PB15 Yes
12 (D12) PB14 Yes
13 (D13) PB13 Yes
14 (D14) PB11 Yes I2C-SDA. Token over by RT-Thread I2C device by default
15 (D15) PB10 No I2C-SCL. Token over by RT-Thread I2C device by default
A0 PA0 No ADC1-CH0. Token over by RT-Thread ADC device by default
A1 PA1 No ADC1-CH1. Token over by RT-Thread ADC device by default
A2 PA2 No ADC1-CH2. Token over by RT-Thread ADC device by default
A3 PA3 No ADC1-CH3. Token over by RT-Thread ADC device by default
A4 PA4 No ADC1-CH4. Token over by RT-Thread ADC device by default
A5 PA5 No ADC1-CH5. Token over by RT-Thread ADC device by default

Notice:

  1. Don't use a same hardware timer to drive PWM (analogRead) and servos at same time, because hardware timers can only generate a same frequency for 4 PWM channels. Otherwise, it could cause a failure when drive servos.

3 Communication

3.1 I2C Bus

I2C bus is SCL/D15 and SDA/D14 pins. Users can directly include the #include <Wire.h>, which is the Arduino official I2C header file, to use the I2C bus.

3.2 SPI Bus

This board doesn't support Arduino SPI header file and functions.

3.3 Serial

This board supports to use Serial. method to operate uart1 device. See example.