10 KiB

Raw Blame History

FSDIO 驱动程序

1. 概述

SD/SDIO/eMMC控制器，主要支持SD卡，eMMC介质的访问能力，同时支持连接SDIO接口设备，目前 FSDIO 驱动已经支持 SD 卡的访问

2. 功能

FSDIO 驱动提供了SD/MMC卡的控制访问方法，

初始化SD/MMC控制器
以轮询方式发送/接收数据和命令

访问SD/MMC卡需要兼容一系列协议命令，这一部分驱动不提供，可以通过第三方框架sdmmc使用

驱动相关的源文件包括，

fsdio
    ├── fsdio.c
    ├── fsdio.h
    ├── fsdio_cmd.c
    ├── fsdio_dma.c
    ├── fsdio_g.c
    ├── fsdio_hw.h
    ├── fsdio_intr.c
    ├── fsdio_pio.c
    ├── fsdio_selftest.

3. 配置方法

以下部分将指导您完成 FSDIO 驱动的软件配置:

初始化 FSDIO 控制器
通过协议命令完成 SD/MMC 卡初始化
通过协议命令读写 SD/MMC 卡数据

4 应用示例

通过协议命令读写SD卡

5. API参考

5.1. 用户数据结构

FSdio

SDIO intance

typedef struct _FSdio
{
    FSdioConfig         config;      /* Current active configs */
    u32                 is_ready;    /* Device is initialized and ready */
    FSdioIDmaDescList   desc_list;   /* DMA descriptor list, valid in DMA trans mode */
    FSdioEvtHandler     evt_handlers[FSDIO_NUM_OF_EVT]; /* call-backs for interrupt event */
    void                *evt_args[FSDIO_NUM_OF_EVT]; /* arguments for event call-backs */
} FSdio; /* SDIO intance */

FSdioConfig

SDIO intance configuration

typedef struct
{
    u32            instance_id; /* Device instance id */
    uintptr        base_addr;   /* Device base address */
    u32            irq_num;     /* Interrupt num */
    FSdioTransMode trans_mode;  /* Trans mode, PIO/DMA */
    FSdioSpeedType speed;       /* Trans speed type */
    FSdioVoltageType voltage;   /* Card voltage type */
} FSdioConfig; /* SDIO intance configuration */

FSdioCmdData

SDIO trans command and data

typedef struct 
{
    u32 cmdidx; /* command index */
    u32 cmdarg; /* command argument */
    u32 response[4]; /* command response buffer */
    u32 flag; /* command flags */
#define FSDIO_CMD_FLAG_NEED_INIT         BIT(1) /* need initialization */
#define FSDIO_CMD_FLAG_EXP_RESP          BIT(2) /* need reply */
#define FSDIO_CMD_FLAG_EXP_LONG_RESP     BIT(3) /* need 136 bits long reply */
#define FSDIO_CMD_FLAG_NEED_RESP_CRC     BIT(4) /* need CRC */
#define FSDIO_CMD_FLAG_EXP_DATA          BIT(5) /* need trans data */
#define FSDIO_CMD_FLAG_WRITE_DATA        BIT(6) /* need trans data to write card */
#define FSDIO_CMD_FLAG_READ_DATA         BIT(7) /* need trans data to read card */
#define FSDIO_CMD_FLAG_NEED_AUTO_STOP    BIT(8) /* need auto stop after command */
#define FSDIO_CMD_FLAG_ADTC              BIT(9) /* need ADTC */
#define FSDIO_CMD_FLAG_SWITCH_VOLTAGE    BIT(10) /* need switch voltage */
    FSdioData *data_p; /* SDIO trans data */
} FSdioCmdData; /* SDIO trans command and data */

FSdioIDmaDesc

SDIO DMA descriptor

typedef struct
{
    u32 attribute; /* ds0 */
#define FSDIO_IDMAC_DES0_DIC	BIT(1)/* 内部描述表不触发TI/RI中断 */
#define FSDIO_IDMAC_DES0_LD	    BIT(2)/* 数据的最后一个描述符 */
#define FSDIO_IDMAC_DES0_FD	    BIT(3)/* 数据的第一个描述符 */
#define FSDIO_IDMAC_DES0_CH	    BIT(4)/* 链接下一个描述符地址 */
#define FSDIO_IDMAC_DES0_ER	    BIT(5)/* 链表已经到达最后一个链表 */
#define FSDIO_IDMAC_DES0_CES	BIT(30)/* RINTSTS寄存器错误汇总 */
#define FSDIO_IDMAC_DES0_OWN	BIT(31)/* 描述符关联DMA，完成传输后该位置置0 */
    u32 non1; /* ds1 --> unused */
    u32 len; /* ds2 bit[25:13] buffer2 size，bit[12:0] buffer1 size*/
#define FSDIO_IDMAC_DES2_BUF1_MASK      GENMASK(12, 0)
#define FSDIO_IDMAC_DES2_BUF1_SIZE(x)  (FSDIO_IDMAC_DES2_BUF1_MASK & (x))
#define FSDIO_IDMAC_DES2_BUF2_MASK      GENMASK(25, 13)
#define FSDIO_IDMAC_DES2_BUF2_SIZE(x)  (FSDIO_IDMAC_DES2_BUF2_MASK & (x << 13))
    u32 non2; /* ds3 --> unused */
    u32 addr_lo; /* ds4 Lower 32-bits of Buffer Address Pointer 1 --> buffer 1 */
    u32 addr_hi; /* ds5 Upper 32-bits of Buffer Address Pointer 1 */
    u32 desc_lo; /* ds6 Lower 32-bits of Next Descriptor Address --> buffer 2 */
    u32 desc_hi; /* ds7 Upper 32-bits of Next Descriptor Address */
} __attribute__ ((packed)) __attribute((aligned(4))) FSdioIDmaDesc; /* SDIO DMA descriptor */

5.2 错误码定义

FSDIO_SUCCESS : 操作成功
FSDIO_ERR_TIMEOUT ：操作超时失败
FSDIO_ERR_NOT_INIT ：控制器未初始化
FSDIO_ERR_SHORT_BUF ：缓冲区大小不足
FSDIO_ERR_NOT_SUPPORT ：操作不支持
FSDIO_ERR_INVALID_STATE ：控制器的状态不合法
FSDIO_ERR_TRANS_TIMEOUT ：传输数据超时失败
FSDIO_ERR_CMD_TIMEOUT ：传输命令超时失败
FSDIO_ERR_NO_CARD ：卡不在位
FSDIO_ERR_BUSY : 卡处于繁忙状态

5.3. 用户API接口

FSdioLookupConfig

const FSdioConfig *FSdioLookupConfig(u32 instance_id)

Note:

Get the device instance default configure

Input:

{u32} instance_id

Return:

{const FSdioConfig *} default configure

FSdioCfgInitialize

FError FSdioCfgInitialize(FSdio *const instance_p, const FSdioConfig *input_config_p)

Note:

initialization SDIO controller instance
get into card-detect mode after initialization, bus width = 1, card freq = 400kHz

Input:

{FSdio} *instance_p, SDIO controller instance
{FSdioConfig} *input_config_p, SDIO controller configure

Return:

{FError} FSDIO_SUCCESS if initialization success, otherwise failed

FSdioDeInitialize

void FSdioDeInitialize(FSdio *const instance_p)

Note:

deinitialization SDIO controller instance

Input:

{FSdio} *instance_p, SDIO controller instance

Return:

{NONE}

FSdioSetIDMAList

FError FSdioSetIDMAList(FSdio *const instance_p, volatile FSdioIDmaDesc *desc, u32 desc_num)

Note:

Setup DMA descriptor for SDIO controller instance

Input:

{FSdio} *instance_p, SDIO controller instance
{volatile FSdioIDmaDesc} *desc, first item in DMA descriptor lists
{u32} desc_num, number of items in DMA descriptor lists

Return:

{FError} FSDIO_SUCCESS if setup done, otherwise failed

FSdioSetClkFreq

void FSdioSetClkFreq(FSdio *const instance_p, u32 input_clk_hz)

Note:

Set the Card clock freqency

Input:

{FSdio} *instance_p, SDIO controller instance
{u32} input_clk_hz, Card clock freqency in Hz

Return:

{None}

FSdioDMATransfer

FError FSdioDMATransfer(FSdio *const instance_p, FSdioCmdData *const cmd_data_p)

Note:

Start command and data transfer in DMA mode

Input:

{FSdio} *instance_p, SDIO controller instance
{FSdioCmdData} *cmd_data_p, contents of transfer command and data

Return:

{FError} FSDIO_SUCCESS if transfer success, otherwise failed

FSdioPollWaitDMAEnd

FError FSdioPollWaitDMAEnd(FSdio *const instance_p, FSdioCmdData *const cmd_data_p, FSdioRelaxHandler relax)

Note:

Wait DMA transfer finished by poll

Input:

{FSdio} *instance_p, SDIO controller instance
{FSdioCmdData} *cmd_data_p, contents of transfer command and data
{FSdioRelaxHandler} relax, handler of relax when wait busy

Return:

{FError} FSDIO_SUCCESS if wait success, otherwise wait failed

FSdioGetInterruptMask

u32 FSdioGetInterruptMask(FSdio *const instance_p, FSdioIntrType type)

Note:

Get SDIO controller interrupt mask

Input:

{FSdio} *instance_p, SDIO controller instance
{FSdioIntrType} type, Type of interrupt, controller/DMA interrupt

Return:

{u32} interrupt mask bits

FSdioSetInterruptMask

void FSdioSetInterruptMask(FSdio *const instance_p, FSdioIntrType type, u32 set_mask, boolean enable)

Note:

Enable/Disable SDIO controller interrupt

Input:

{FSdio} *instance_p, SDIO controller instance
{FSdioIntrType} type, Type of interrupt, controller/DMA interrupt
{u32} set_mask, interrupt mask bits
{boolean} enable, TRUE: enable interrupt mask bits

Return:

{NONE}

FSdioInterruptHandler

void FSdioInterruptHandler(s32 vector, void *param)

Note:

Interrupt handler for SDIO instance

Input:

{s32} vector, Interrupt id
{void} *param, Interrupt params, is SDIO instance

Return:

{NONE}

FSdioRegisterEvtHandler

void FSdioRegisterEvtHandler(FSdio *const instance_p, FSdioEvtType evt, FSdioEvtHandler handler, void *handler_arg)

Note:

Input:

{FSdio} *instance_p, SDIO controller instance
{FSdioEvtType} evt, interrupt event
{FSdioEvtHandler} handler, event call-back function
{void} *handler_arg, argument of event call-back function

Return:

{NONE}

FSdioPIOTransfer

FError FSdioPIOTransfer(FSdio *const instance_p, FSdioCmdData *const cmd_data_p)

Note:

Start command and data transfer in PIO mode

Input:

{FSdio} *instance_p, SDIO controller instance
{FSdioCmdData} *cmd_data_p, contents of transfer command and data

Return:

{FError} FSDIO_SUCCESS if transfer success, otherwise failed

FSdioPollWaitPIOEnd

FError FSdioPollWaitPIOEnd(FSdio *const instance_p, FSdioCmdData *const cmd_data_p, FSdioRelaxHandler relax);

Note:

Wait PIO transfer finished by poll

Input:

{FSdio} *instance_p, SDIO controller instance
{FSdioCmdData} *cmd_data_p, contents of transfer command and data
{FSdioRelaxHandler} relax, handler of relax when wait busy

Return:

{FError} FSDIO_SUCCESS if wait success, otherwise wait failed

FSdioGetCmdResponse

FError FSdioGetCmdResponse(FSdio *const instance_p, FSdioCmdData *const cmd_data_p)

Note:

Get cmd response and received data after wait poll status or interrupt signal

Input:

{FSdio} *instance_p, SDIO controller instance
{FSdioCmdData} *cmd_data_p, contents of transfer command and data

Return:

{FError} FSDIO_SUCCESS if get success

FSdioRestart

FError FSdioRestart(FSdio *const instance_p)

Note:

reset controller from error state

Input:

{FSdio} *instance_p, instance of controller

Return:

{FError} FSDIO_SUCCESS if restart success

10 KiB Raw Blame History Unescape Escape

FSDIO 驱动程序

1. 概述

2. 功能

3. 配置方法

4 应用示例

通过协议命令读写SD卡

5. API参考

5.1. 用户数据结构

FSdio

FSdioConfig

FSdioCmdData

FSdioIDmaDesc

5.2 错误码定义

5.3. 用户API接口

FSdioLookupConfig

FSdioCfgInitialize

FSdioDeInitialize

FSdioSetIDMAList

FSdioSetClkFreq

FSdioDMATransfer

FSdioPollWaitDMAEnd

FSdioGetInterruptMask

FSdioSetInterruptMask

FSdioInterruptHandler

FSdioRegisterEvtHandler

FSdioPIOTransfer

FSdioPollWaitPIOEnd

FSdioGetCmdResponse

FSdioRestart

10 KiB

Raw Blame History